Scribd
Upload
47 views1 page

MVQ60 80-06-60041 en

The document is a material datasheet for MVQ 60 / 80-06-60041, a methyl vinyl silicone rubber with excellent heat and cold resistance, as well as good electrical insulation properties. It provides various physical properties and test values according to DIN standards, including hardness, density, tensile strength, and operating temperature range. The document also includes a disclaimer regarding the applicability of the data and the responsibility of the user for testing the product's suitability.

Uploaded by

Tomislav Sertić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views1 page

MVQ60 80-06-60041 en

The document is a material datasheet for MVQ 60 / 80-06-60041, a methyl vinyl silicone rubber with excellent heat and cold resistance, as well as good electrical insulation properties. It provides various physical properties and test values according to DIN standards, including hardness, density, tensile strength, and operating temperature range. The document also includes a disclaimer regarding the applicability of the data and the responsibility of the user for testing the product's suitability.

Uploaded by

Tomislav Sertić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material datasheet November 2019 Page 1 | 1

MVQ 60 / 80-06-60041
60 ShA / peroxide crosslinked / grey RAL 7040

! Methyl vinyl silicone rubber


! Standard material
! Excellent heat resistance and extreme cold resistance.
! Very good resistance to oxygen, ozone, UV rays and weather conditions.
! Very good electrical insulation properties, physiologically sound.

Property Value Unit DIN Standard


Hardness 60 +5/-3 Shore A DIN ISO 7619-1
Density 1,22 ±0,03 g/cm³ DIN EN ISO 1183-1 A
Tensile strength at 100% elongation – N/mm² DIN 53504
Elongation at break ≥ 125 % DIN 53504
Tensile strength ≥7 N/mm² DIN 53504
Compression set 150°C/24h ≤ 40 % DIN ISO 815-1 B
Rebound resilience 48 % DIN ISO 53512
Tear resistance 7,2 N/mm DIN ISO 34-1 A
Tear resistance 11,6 N/mm DIN ISO 34-1 B
min. operating temperature -40 °C static
max. operating temperature ca. +200 °C constantly

All above stated data result from random tests which were taken from the ongoing production. All data were established based on standard test-specimen according to ISO, DIN and ASTM
standards and can basically not be carried over to the construction element.

Our applied technical advice, either oral, written or through tests is given according to our best knowledge. However, this information is to be considered as non-obligatory instruction, also in terms
of any protective rights of a third party, and does not exempt you from testing our product in reference to its suitability for the intended process and purpose. Utilisation, application and processing of
the products occur entirely outside of our control and are therefore exclusively your responsibility. However, should a case of liability come into question, it will be limited to all damages in the value
of the product which we delivered and you used. By all means, we do warrant the impeccable quality of our products in accordance with our general sales and delivery conditions.

Trygonal Group GmbH Neue Heimat 22 Phone: +49 (0) 70 46 / 96 10-0 [email protected]
  D-74343 Sachsenheim-Ochsenbach   Fax: +49 (0) 70 46 / 96 10-33 www.trygonal.com
 

You might also like