Scribd
Upload
18 views4 pages

اسئلة كهرباء دور ثاني

This document is a final exam paper for the Engineering Mechanics (Statics) course at Tikrit University, dated September 2017. It includes various questions related to statics, such as determining centroids, moments, and equilibrium conditions for different blocks and forces. The exam is intended for first-year students in the Electrical Engineering Department.

Uploaded by

عادل محمود
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
18 views4 pages

اسئلة كهرباء دور ثاني

This document is a final exam paper for the Engineering Mechanics (Statics) course at Tikrit University, dated September 2017. It includes various questions related to statics, such as determining centroids, moments, and equilibrium conditions for different blocks and forces. The exam is intended for first-year students in the Electrical Engineering Department.

Uploaded by

عادل محمود
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Ministry of Higher Education Class 1st

& Scientific Research Subject Engneering Mech. (Statics)


hrs .Time 3.
Tikrit University Form ( 3 )
Second Attempt
College of engineering Final Exam Date / 9 / 2017
.Electrical Eng. Dept 2016-
2017
‫ الدرجات موزعة بالتساوي على‬- ‫ تسلم ورقة األسئلة مع دفتر االمتحان‬: ‫مالحظة‬
‫ االجابة على جميع االسئلة‬- .‫االسئلة‬
.Q.1– Determine the y-coordinate of the centroid of the shaded area

on the part as shown while Q.2 – The robot exert the 90N force
inserting a cylindrical part into the circular hole .Determine the moments about points A,B and C of the force which the
.part exerts on the robot

Q.3 –The masses of blocks A and C are 2.4 Kg and 6Kg,respectively.Knowing that µs =0.5 between block A
and the incline and µs= 0.3 between block C and the horizental surface , determine (a) the smallest
value of the mass of block B for which the blocks are in equilibrium ,(b) the largest value of the block
.B for which the blocks are in equilibrium
Ministry of Higher Education Class 1st
& Scientific Research Subject Engneering Mech. (Statics)
hrs .Time 3.
Tikrit University Form ( 3 )
Second Attempt
College of engineering Final Exam Date / 9 / 2017
.Electrical Eng. Dept 2016-
2017
Q.4 - Replace the two forces by an equivalent resultant force and couple moment at point O. Set F
= 20 lb.

Q.5 - If block B weighs 400N and block C weighs 200 N , determine the required
weight of block D and the angle θ for equilibrium.

With Good luck for all students

Examiner Head
.of Dept
Assistant . Prof. Adel Al-Bash
Dr. Ibrahem K..Salah
Ministry of Higher Education Class 1st
& Scientific Research Subject Engneering Mech. (Statics)
hrs .Time 3.
Tikrit University Form ( 3 )
Second Attempt
College of engineering Final Exam Date / 9 / 2017
.Electrical Eng. Dept 2016-
2017
Ministry of Higher Education Class 1st
& Scientific Research Subject Engneering Mech. (Statics)
hrs .Time 3.
Tikrit University Form ( 3 )
Second Attempt
College of engineering Final Exam Date / 9 / 2017
.Electrical Eng. Dept 2016-
2017

You might also like