Scribd
Upload
17 views1 page

Deltafluid Ds Orifice Plate Sharp Edge

The document outlines the specifications and technical characteristics of a sharp edge orifice plate, which is a cost-effective solution for measuring fluid flow. It adheres to various standards including ISO and ASME, and is suitable for liquids, gases, and steam with a measurement accuracy of 0.5%. The orifice plate can be customized in terms of material and dimensions, accommodating pipe sizes from 25 mm to 1,000 mm.

Uploaded by

Nurdin Mubarok
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views1 page

Deltafluid Ds Orifice Plate Sharp Edge

The document outlines the specifications and technical characteristics of a sharp edge orifice plate, which is a cost-effective solution for measuring fluid flow. It adheres to various standards including ISO and ASME, and is suitable for liquids, gases, and steam with a measurement accuracy of 0.5%. The orifice plate can be customized in terms of material and dimensions, accommodating pipe sizes from 25 mm to 1,000 mm.

Uploaded by

Nurdin Mubarok
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SHARP EDGE

ORIFICE PLATE
Cost-saving and reliable solution

GENERAL DATA
- Standards: ISO 5167-1&2, ASME MFC-3M, ISO/TR 15377
- Flange mounting(1):
o ISO PN 2.5 to PN 420
o ASME 150# to 2500#
o Others: upon request
- Material:
o Standard: stainless steel 304L / 316L
o Others(1): according to your application
- Fluid: liquid, gas, steam
- Pipes from φ 25 to 1 000 mm
- Accuracy: 0.5 % of the max flow rate
- Repeatability of measurement: 0.1 %

pressure
taps(1)

FLUID

Optional: stellite coating(1)


TECHNICAL CHARACTERISTICS ISO/TR 15377 ISO 5167-1&2 ASME MFC-3M
ReD Reynolds number in the pipe 5 000 ≤ ReD ≤ 10 8

D (2)
Inside pipe diameter 25 mm ≤ D < 50 mm 50 mm ≤ D ≤ 1 000 mm
d Orifice diameter d ≥ 12.5 mm
ß d/D 0.5 ≤ ß ≤ 0.7 0.1 ≤ ß ≤ 0.75
Upstream face roughness < 10-4.d
r Sharp edge radius r < 0.000 4.d
e Orifice thickness 0.005.D ≤ e ≤ 0.02.D
E Plate thickness e ≤ E ≤ 0.05.D
α Angle of the downstream bevel α = 45° ± 15°
t Flatness tolerance t < 0.005.(D - d)/2
(1)
For more details, see «Technical information» section on page 54.
(2)
Orifice plates with diameters D from 6 mm are described in the ASME MFC-14M standard - see page 22.
10

You might also like