6 5 4 3 2 1

NOTE PART NO. PART NAME Material QTY.

1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. 1 HB1_Part_01 SS321 1
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
2 HB1_Part_02 MS 1
22 3 HB1_Part_03 SS321 2
7 9 13 8 10 4 HB1_Part_04 MS 2
5 HB1_Part_05 SS321 1
37 6 HB1_Part_06 SS321 1
23
D 7 HB1_Part_07 SS321 1 D
8 HB1_Part_08 SS321 1
9 HB1_Part_09 SS321 1
5 10 HB1_Part_10 SS321 10
11 HB1_Part_11 SS304 2
12 HB1_Part_12 SS304 1
13 HB1_Part_13 SS321 1
38 1 14 HB1_Part_14 SS321 2
14 15 HB1_Part_15 SS316 1
16 HB1_Part_16 SS316 1
17 HB1_Part_17 SS321 6
20 12 3 18 HB1_Part_18 SS321 2
46 19 HB1_Part_19 POLYCARBONATE 1
20 HB1_Part_20 POLYCARBONATE 1
24 21 HB1_Part_21 GLASS 2
37 22 HB1_Part_22 SS321 1
17 23 HB1_Part_23 SS321 2
C 24 HB1_Part_24 SS321 2 C
2 6 25 HB1_Part_25 SS321 1
4 26 HB1_Part_26 SS304 1
27 HB1_Part_27 SS304 1
28 HB1_Part_28 SS304 1
25 29 HB1_Part_29 SS304 1
21 16 30 HB1_Part_30 SS321 1
31 HB1_Part_31 SS304 1
32 HB1_Part_32 SS321 2
39 48 31 33 HB1_Part_33 SS321 1
34 HB1_Part_34 SS321 1
35 HB1_Part_35 SS321 2
44 36 HB1_Part_36 SS321 1
26
11 37 HB1_Part_37 SS321 4
47 38 HB1_Part_38 SS316 1
39 HB1_Part_39 SS321 1
34 40 HB1_Part_40 SS321 1
B 45 41 HB1_Part_41 SS304 2 B
28 42 HB1_Part_42 SS304 2
43 HB1_Part_43 SS321 2
15 30 44 HB1_Hinge 1 SS321 4
45 HB1_Hinge 2 SS321 4
18 46
46 HB1_Hinge Pin SS304 4
35
47 HB1_Part_44 SS321 1
11 29 27 28 50 HB1_Part_47 SS321 1
51 HB1_Part_48 SS321 2
32 52 HB1_Part_45 SS321 1
53 HB1_Part_46 SS321 1
PLOT. NO. 89 SECTOR 3 IMT MANESAR
33 GURGAON 122050 HARYANA (INDIA)
36

A PART NO. : 00 WEIGHT- KG A

CUSTOMER NAME: KAYSONS PART NAME : HB1_Assembly_01 REVISION : NA
42 41 19 40 43 45 44 PROJECT NAME : HB1_Assembly_01 MATERIAL: SS 321 and SS 316, SS304

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:10

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 1 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

837.20

D D

870.87
518.00
870.87
309.38
836.88
C 265.00 C
250

250.00
345 345

1873.25
930.00

B B
1693.00

208.20

1691.20
460.00

498.20
32.77

32.77

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)

631.00 526.20
A PART NO. : WEIGHT- KG A
CUSTOMER NAME: KAYSONS PART NAME : HB1_Assembly_01 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS 321 and SS 316, SS304

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:10

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 2 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. Note- TAG SIZE

Material- SS321
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. A1 4.50 THRU
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. A2 4.50 THRU
A3 4.50 THRU

Thickness- 2mm A4
A5
4.50 THRU
4.50 THRU

Qty- 1Pcs
A6 4.50 THRU
A7 4.50 THRU
A8 4.50 THRU
A9 4.50 THRU
A10 4.50 THRU

D D

19.04
A11 4.50 THRU
A12 4.50 THRU
A13 4.50 THRU
UP 90° R 2 A14
B1
4.50 THRU
8.00 THRU
B2 8.00 THRU
B6 B8 B3 8.00 THRU
B4 8.00 THRU
B5 8.00 THRU
B6 8.00 THRU
B7 8.00 THRU

F1 B8
B9
8.00 THRU
8.00 THRU
B10 8.00 THRU
C1 6.80 THRU
A7 A14 C2 6.80 THRU
A6 B4 A13 C3 6.80 THRU

B10 C10
C4 6.80 THRU
C5 6.80 THRU
C6 6.80 THRU
B3 C7 6.80 THRU
D14 C9 C8 6.80 THRU
C9 6.80 THRU
619.00 D13 C10 6.80 THRU

B2 D12 C8
D1
D2
3.50 THRU
3.50 THRU

2.00 B9
D3
D4
3.50 THRU
3.50 THRU
Thk B1 C7 A12 D5 3.50 THRU
A5 D11
C C
D6 3.50 THRU
A4 A11 D7 3.50 THRU
D8 3.50 THRU

DOWN 90° R 2
D1 D2 D9 3.50 THRU

DOWN 90° R 2

DOWN 90° R 2
D10 3.50 THRU

DOWN 90° R 2
D11 3.50 THRU
C2

21.00
D12 3.50 THRU
D10

653.17
160.00
D13 3.50 THRU
160.00

D14 3.50 THRU

C6 D9

152.00

90
E1 5.60 THRU
E2 5.60 THRU
C1 F1 6.00 THRU
D8 G1 7.00 THRU

A3 C5 D7 A10
A2 A9

31.00
E1
60 D6 56.13
619.00 D5 19.04
E2

29.50
19

397.00
C4
B A1 A8 B
60

41

G1
D4
Y
9 60 39 39 39 C3 D3
60 9
UP 90° R 2
25

B5 B7
0

19.04
160.00 0 X
147.00 268.34
139.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
21.00 WEBSITE: WWW.AVENGINEERS.CO.IN
13.00
A 0 PART NO. : 01 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_01 REVISION : NA
0

232.50
242.50

386.00
396.00

530.00
540.00
69.00
89.00
9.00

550.00

610.00
619.00

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 3 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
Thickness- 2mm
Qty- 1Pcs
D D

160.00
156.00
C 138.00 C
135.00
130.00

113.00
80.00
74.50
50.00
48.00
33.00
30.00
15.00
B B
12.00

0
107.50

139.89

160.50

181.50

205.00

246.00
252.50
273.50

282.00
298.00

326.00

333.50

364.00

392.50

397.00
418.00

437.00
438.50
454.00
475.00

487.00

508.00

527.00

573.00

610.00
619.00
33.50
37.50
58.50

69.00
9.00
0

305.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 01 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_01 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 4 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- MS
Thickness- 1mm
D Qty- 1Pcs D

110.00

C C

5.50
35.00

74.00

B B

9.33
35.00
9.33

1.00
Thk
110.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

14.25° GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 02 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_02 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 5 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
Thickness- 2mm
Qty- 2Pcs

19.04
D 228.34 D
DOWN 90° R 2

D2 D4
B3 B11
A9 A11
B8 TAG SIZE
A8 4.00 THRU
A9 4.00 THRU
A10 4.00 THRU
E7 E14 A11 4.00 THRU
B1 6.80 THRU
B2 6.80 THRU
B3 6.80 THRU
B4 6.80 THRU
B5 6.80 THRU
B6 6.80 THRU
B7 6.80 THRU

B7 B8
B9
6.80 THRU
6.80 THRU
B10 6.80 THRU
B11 6.80 THRU
C1 5.85 THRU
E6 E13 D1 8.00 THRU

C 619.00 E5
D2 8.00 THRU
C
E12 D3
D4
8.00 THRU
8.00 THRU
E1 4.50 THRU

UP 90° R 2

UP 90° R 2

UP 90° R 2
UP 90° R 2
E2 4.50 THRU

B10
E3 4.50 THRU
2.00 E4 4.50 THRU

B2 B6
19

E5 4.50 THRU
Thk E6 4.50 THRU
E7 4.50 THRU

653.17
E8 4.50 THRU
E9 4.50 THRU
E10 4.50 THRU
60

E11 4.50 THRU

41

E12 4.50 THRU

E4 E11 E13 4.50 THRU
E3 E10 E14 4.50 THRU

9.00 61 61.00 9.00

B5 56.13
29.50

19.04

29.50 E2 E9
B 80 10 132 10 143 10 144 17.00 60.00 Y E1 E8 B
C1 B4 A10
A8
90.00 B1 B9
DOWN 90° R 2
96.00

112

120
78

50
0 D1 D3

31.00
55.00

8.00

19.04
0 X

10 132.00 143.00 144.00 17.00

39 8.50
619.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 03 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_03 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 6 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321
D Thickness- 2mm D
Qty- 2Pcs

C C

120.00
108.00 120.00

105.00 116.00
99.00
100.00
55.00 85.00

15.00 35.00
B 12.00 21.00 B
0 4.00
0
0

179.50

234.00
244.00

387.00
397.00

529.00
539.00
549.00
17.00
29.50
49.50

90.00

309.50

439.50

569.50
575.00
589.50
602.00
619.00

21.00

60.00
8.50
0
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 03 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_03 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 7 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material-MS
D Thickness- 1mm D
Qty- 2Pcs

C C
0
5.5

590.00
35.00

35.00 130.00 130.00 130.00 130.00

B B

1.00
Thk
34.81

9.33
9.33

590.00 14.25°

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 04 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_04 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 8 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.

Note-
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Material- SS321
Thickness- 3mm
D Qty- 1Pcs D

120.00

21.00

37.06
15.00 90.00
DOWN 90° R 3

134.13
C C
40.00

6.
80

19.00

120
40.00
60.00

3.50
22.00

B B
100

100.00

40
6

59.00
20

PLOT. NO. 89 SECTOR 3 IMT MANESAR

3.00 GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
40.00 THK

A PART NO. : 05 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_05 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 9 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. Note-
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Material- SS321
Thickness- 3mm 257.30
Qty- 1Pcs

17.06
D D
C6 C8
UP 90° R 3
TAG SIZE
A1
A2
4.50 THRU
4.50 THRU
52.49
A3 4.50 THRU
A4
A5
4.50 THRU
4.50 THRU
A8 A16
A6
A7
4.50 THRU
4.50 THRU
18.06
A8 4.50 THRU D4 D8
A9
A10
4.50 THRU
4.50 THRU
A7 D3 D7 A15
A11 4.50 THRU
A12 4.50 THRU C4
A13
A14
4.50 THRU
4.50 THRU
C12
A15 4.50 THRU
A16 4.50 THRU
B1 6.00 THRU
B2 6.00 THRU A6 A14
B3 6.00 THRU
A5 C3 C11 A13
619.00 B4 6.00 THRU

DOWN 90° R 3
C1 8.00 THRU

DOWN 90° R 3

DOWN 90° R 3
DOWN 90° R 3
C2 8.00 THRU

C C
C3 8.00 THRU
C4 8.00 THRU
157.00 80.00 145.00 80.00 C5 8.00 THRU
C6 8.00 THRU B2 B4

647.25
C7 8.00 THRU
C8 8.00 THRU
C9 8.00 THRU
C10 8.00 THRU
C11 8.00 THRU
C12 8.00 THRU
D1 3.50 THRU A4 A12
D2 3.50 THRU
A3 C2 C10
A11
158.20

113.00

D3 3.50 THRU
D4 3.50 THRU
D5 3.50 THRU
D6 3.50 THRU
11.20

21.00
D7 3.50 THRU
D8 3.50 THRU A2 A10
C1 C9
D2 D6
B1 B3
D1 D5
87.00 90 54 10 143 10 92 50 A1 A9
Y
B 114 UP 90° R 3 B
C5 C7

0
17.00

57.30
146.20 0 X

17.06
619
28.10 90.00 8.00
6

57.30
3.00
THK
40.30

21.00
20.3

50 200 PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
9 61 479
29.80

A PART NO. :06 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_06 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 10 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
D Material- SS321 D
Thickness- 3mm
Qty- 1Pcs

C 158.20
C

135.60

23.20
22.60

B 12.00 B
0
0

114.00

135.00

157.00

237.00

382.00

462.00

484.00

505.00

619.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :06 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_06 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 11 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
TAG SIZE
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. A1 8.00 THRU

Note-
A2 8.00 THRU
A3 8.00 THRU
A4 8.00 THRU

Material- SS321 B1
B2
10.20 THRU
10.20 THRU

D Thickness- 2mm B3
B4
10.20 THRU
10.20 THRU
D
Qty- 1Pcs
C1 3.20 THRU
C2 3.20 THRU
C3 3.20 THRU
C4 3.20 THRU
D1 10.00 THRU
D2 10.00 THRU

15.00
D3 10.00 THRU

235.00
30.00

287.17

55.00 120.00 60.00 B2 B4

UP 90° R 2
D3
C C
A2 A4

C2 C4

302.17
UP 90° R 2

UP 90° R 2
D2

31.00
235.00
30.00 C1 C3
44.75 146
A3
15.00
55.00

85.00

A1 D1
Y
28.04
90.00

98
B B
UP 90° R 2
100.00

81.00
45

B1 B3
141.00
250.00

250.00
0

28.04
90.00

0 X

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

30.00
A PART NO. : 07 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_07 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 12 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. TAG SIZE
A1 8.00 THRU
Note- A2 8.00 THRU
Material- SS321 A3 8.00 THRU
A4 8.00 THRU
D Thickness- 2mm B1 10.20 THRU D
Qty- 1Pcs B2 10.20 THRU
B3 10.20 THRU
B4 10.20 THRU
30.00

235
C1 9.80 THRU
55 120 60 C2 9.80 THRU
C3 9.80 THRU

287.17

B2 B4
DOWN 90° R 2
C C

28.04 C3
A2 A4

235.00

DOWN 90° R 2

DOWN 90° R 2
15.00
44.75 145.50 C2

302.17
31
A3
55.00

90.00
A1 C1
B B
100.00
141.00

DOWN 90° R 2
250.00

B1 B3

250.00
90.00

28.04
0 X
39.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : 08 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_08 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 13 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. TAG SIZE
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. A1 10.20 THRU
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
A2 10.20 THRU
A3 10.20 THRU

Note- A4
A5
10.20 THRU
10.20 THRU

Material- SS321 A6 10.20 THRU

D A7 10.20 THRU
D
Thickness- 2mm A8 10.20 THRU

Qty- 1Pcs
A9 10.20 THRU
DOWN 90° R 2 B1 8.00 THRU
B2 8.00 THRU
B3 8.00 THRU
A9

A7
B3

C C

DOWN 90° R 2
DOWN 90° R 2
A6

1245.17
A5
B2

A4
15

1193.00
28.04
A3

30
28.04
313.00 340 410 130
A2
B B1 B

30.00
15.00
1193.00 A1
DOWN 90° R 2
30

A8
15.18
82.17
30.00

30.00
15.00
0
PLOT. NO. 89 SECTOR 3 IMT MANESAR
1063.00

1133.00

1193.00
313.00

533.00

653.00

723.00

893.00
0

GURGAON 122050 HARYANA (INDIA)

WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :09 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_09 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 14 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

M6 Press Fit Nut

Note-
Material- SS321
Thickness- 2mm
D D
20.00
Qty- 10Pcs

30.00

28.04
10.50
C UP 90° R 2
C

65.38
8.00

30.00

0 0
8 .
B B
39.30

10.50

39.30
20.00

10 PLOT. NO. 89 SECTOR 3 IMT MANESAR

2.00 GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
THK
20.00
A PART NO. :10 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_10 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 15 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material-SS304
D Thickness- 1mm D
Qty- 2Pcs

425.00

C C
30
R

10.00

87.00
B 15.00 5 0 B
15.00 8 .
10.50
10.50

44.5

41
20.00
410.00 87.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :11 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_11 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 16 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material-SS304
Thickness- 1mm
D D
Qty- 1Pcs

C C

620.00
15.00

10.00

7.50
620.00

B B

8.50
70.05

70.05
66.10

0
8.0
40.00
10.00

30.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :12 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_12 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 17 OF 62
PART NO. :
6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321
D Thickness- 3mm D
Qty- 1Pcs

680.00
15.00 650.00
C C
40

10
.20
210.00
120.00

5 0
6.
25

295 90
B B

3.00
Thk
680.00
210.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :13 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_13 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 18 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
Thickness- 4mm
D Qty- 2Pcs D

120.00

120.00

C C

26.58
30.50

DOWN 90° R 4

82.67
120.00 30.50

12.30

B B
60.00

60.00

6.80
8.40

15.00 90.00 4.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR

THK GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :14 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_14 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 19 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE

Note-
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. 400.30
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Material- SS316
Thickness- 1.2mm UP 90° R 1.2

Qty- 1Pcs
D D

UP 90° R 1.2
UP 90° R 1.2
985.30
C C

930.00

40 40 750.00

9.00
30.00

30.00
13.00

30.00 28.83 28.83

9.00

6.
17.50

80
12.00

15.00

38
B B
UP 90° R 1.2
320.00

0
7.0
310.00
345.00

310.00

300.00

345.00

28.83
1.20
THK

PLOT. NO. 89 SECTOR 3 IMT MANESAR

30.00 GURGAON 122050 HARYANA (INDIA)
930.00 WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :15 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_15 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 20 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-

28.83
400.30
Material- SS316
Thickness- 1.2mm UP 90° R 1.2
D Qty- 1Pcs D

28.83 28.83

985.30

UP 90° R 1.2
UP 90° R 1.2
C C
80
6.

930.00
13.00

40 40 770.00
30

930.00
12.00
18.20
B B

15.00

28.83
40

38
17.50

54
23

UP 90° R 1.2

345.00
7

300.00 310.00
345.00

310.00

320.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :16 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_16 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 21 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
D Material- SS321 D
Thickness- 3mm
Qty- 6Pcs

50.00

50.00
C C

17.06
34.13
2xM5 Thread DOWN 90° R 3
20.00

20.00

50.00

B B
20.00

20.00

6.00 38.00
3.00
8.20

THK

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :17 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_17 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 22 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
Thickness- 3mm
D Qty- 2Pcs D

50.00

50.00

C C
19.00

16.06
34.63
DOWN 90° R 3

50.00
19.00

B B

21.50
7.00
21.50

7.20

3.00
THK
10 30.00 10

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :18 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_18 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 23 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- Polycarbonate
Thickness- 4mm
D Qty- 1 Pcs D

347.89

600.00

C C
70.00

DOWN 90° R 3

DOWN 90° R 3
600.00

UP 90° R 3

UP 90° R 3
600.00
70.00
10.00 580.00
53.50

30.00
8.5
B 0 B
4.00

272.00

220.00
165.00

Thk
272.00

26.30 26.30

30.00
88.90 46.40

240.00 120.00 240.00

27.50
5.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :19 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_19 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 24 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE Note-
Material- Polycarbonate
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Thickness- 4mm
Qty- 1 Pcs
D D

390.89

C 600.00 C

DOWN 90° R 3

DOWN 90° R 3
70.00

UP 90° R 3
600.00

UP 90° R 3
600

10.00 580 28

18.50
51

B 65
4.00 B
50
8.

Thk
85

210.00

30
275
314.50

220

21.3 18.80
135

55 39.40
83.90
21

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
70
A PART NO. :20 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_20 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 25 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- Glass
D Thickness- 5mm(Pasted) D
Qty- 2 Pcs

5.00
292.00

C C

14
1.
37
00
0.
R9
x
4
302.00

B B

302.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
292.00 WEBSITE: WWW.AVENGINEERS.CO.IN
5.00
Thk
A PART NO. :21 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_21 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: GLASS

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 26 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1

Welding 217.17

Note-
Material- SS321

DOWN 90° R 2
DOWN 90° R 2
D Thickness- 2mm DOWN 90° R 2 D
Qty- 1Pcs

15.04
23.54

DO
WN
35.00 0
. 6

90°
4
55.00

UP 90° R 2
6 5 0 4

49.50
41.95
.

R2
5. 18

35.00
44.50 6 5
5.
67.90
55.00
77.78

62.93
DETAIL D

51.90
44.50
C C
DETAIL B
DETAIL C

1717.17

DOWN 90° R 2
1682.00

1333.00 20.00
349.00
D C
B

161.20
80

179.50
179.50

175.50
46.00

25
78.47

B 18.04 B
20.5
34

4.60
5.65

478.00 25.50
67

41

3.5
3.50

67.
5.6
.9
.90

0
10

5
90
30

1682.00 DOWN 90° R 2

20.00

20.00
17.00

23.50

0
8.00
10.50

20
. 0
4

18.04
10

220.00 220.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 140.00 42.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
21 WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :22 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_22 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 27 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1

128.00
126.10
110.50
D 94.90 D
93.00
58.00
56.10
40.50
24.90
23.00
0

1061.00

1131.00

1179.00
1204.00

1682.00
122.00

212.00

311.00

531.00

651.00

721.00

891.00
32.00

166.50
123.50 123.50
0

118.00 118.00
92.50 92.50
C 90.50 90.50 C
63.00 78.00
50.50 63.00
50.50 50.50
48.50 48.50
28.25
17.50 23.00
15.00 17.50
0 0

1003.50
1031.00

1092.50
1120.00
1147.50

1333.00

1602.00
1618.00

1682.00
0

103.50
131.00
158.50

197.75
220.00
242.25
275.00
292.50
310.00
327.50
365.00
382.50
400.00
417.50
455.00
472.50
490.00
507.50
545.00
562.50
580.00
597.50
635.00
652.50
687.50
725.00
742.50
760.00
777.50

823.50
851.00
878.50
912.50
940.00
967.50
42.00

B B
20.00
12.00 23.00
20.00
0 0
13.50
23.50

1022.00

1162.00

1204.00
1221.00

1441.00

1618.00
1661.00
1678.00
1682.00
0

182.00

322.00

462.00

602.00

742.00

882.00
15.00
42.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :22 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_22 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 28 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
TAG SIZE
A1 9.80 THRU
NOTE A2 9.80 THRU
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
A3 9.80 THRU
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
A4 9.80 THRU
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
A5 9.80 THRU
A6 9.80 THRU
B1 7.90 THRU

Note- B2
B3
7.90 THRU
7.90 THRU

Material- SS321 B4
B5
7.90 THRU
7.90 THRU
D Thickness- 2mm B6
C1
7.90 THRU
40.00 THRU
D
Qty- 2 Pcs(1LH+ 1 RH)
C2 40.00 THRU
C3 40.00 THRU
C4 40.00 THRU
D1 5.00 THRU
D2 5.00 THRU
D3 5.00 THRU
D4 5.00 THRU
E1 6.80 THRU
E2 6.80 THRU
E3 6.80 THRU
E4 6.80 THRU
E5 6.80 THRU

275.67 E6 6.80 THRU

80
A4 A6
9.

28.54
DOWN 90° R 2
340.00
15.00

20.00 20.00 D4
C C4 E6 C
A2 D3
E2
E5
220.00
11.04

20.00
0 0 0 B2 B4 B6
. 9 40 .
7

DOWN 90° R 2

DOWN 90° R 2
393.17
240.00 C1 C3

60.00
220.00
0 0
200.00 5 .

B1 B3 B5
.00 15.00
150.00 4 0
B B

240.00
145.00
E4
28.54
40 A1 E1
115.00
D2
C2 E3

28.54
90.00
D1
6.80 9.80
DOWN 90° R 2
45.50 A3 A5
60.00

20.00
0
PLOT. NO. 89 SECTOR 3 IMT MANESAR
20

GURGAON 122050 HARYANA (INDIA)

WEBSITE: WWW.AVENGINEERS.CO.IN
30.50
125.00
0

170.00

215.00

255.00
275.00
293.00
295.00
320.00
340.00
20.00
30.00
45.00
47.00
65.00
85.00

A PART NO. :23 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_23 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM
FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 29 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
TAG SIZE
A1 9.80 THRU

Note-
NOTE A2 9.80 THRU
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. A3 9.80 THRU

Material- SS321
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. A4 9.80 THRU
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. A5 9.80 THRU

Thickness- 2mm
A6 9.80 THRU
A7 9.80 THRU

Qty- 2 Pcs(1LH+ 1 RH)

A8 9.80 THRU
A9 9.80 THRU
B1 7.90 THRU

28.54
B2 7.90 THRU
D B3 7.90 THRU D
275.67 B4 7.90 THRU
B5 7.90 THRU
B6 7.90 THRU
A7 A9 C1 8.20 THRU
C2 8.20 THRU
C3 8.20 THRU
DOWN 90° R 2 J4 C4 8.20 THRU

D5 F4 E10 F8 C5
C6
8.20 THRU
8.20 THRU
F3 F7 J8 C7 8.20 THRU
B4 B6 C8 8.20 THRU
B2 J2 C9 8.20 THRU
A5 C10 C10 8.20 THRU
J7 C11 8.20 THRU
C12 8.20 THRU
C4 C8 C16 C20 K2 C13 8.20 THRU
A4 E9 C14 8.20 THRU
C15 8.20 THRU
D4 C16 8.20 THRU
C17 8.20 THRU
C15 E8 C18 8.20 THRU

C19 C19 8.20 THRU

C3 C7 C20 8.20 THRU

600.00 C14
C C
D1 4.60 THRU
D2 4.60 THRU

2.00 H4 G6 D3 4.60 THRU

DOWN 90° R 2
20
14.80

G2

DOWN 90° R 2
D4 4.60 THRU
THK G4 D5 4.60 THRU
H3 E7

653.17
E2 D6 4.60 THRU
30.50

20.00 A3 E1 40.00 THRU

D3 D6 E2 40.00 THRU
E3 40.00 THRU
E4 40.00 THRU
E1
H2 E6 E5 40.00 THRU

G1 E6 40.00 THRU
60.00 70.00 170.00 170.00 70.00 60.00 G3 G5 E7 40.00 THRU
H1 E8 40.00 THRU
E9 40.00 THRU
C13 C18
C2 C6 E10 40.00 THRU

20.00 30.50 F1 4.50 THRU

20.00 28.54 C12 E5

F2 4.50 THRU
F3 4.50 THRU

D2 F4 4.50 THRU
A2

20
F5 4.50 THRU
K1 F6 4.50 THRU
E4 11.04
20.00

F7 4.50 THRU
C1 C5 C11 C17 F8 4.50 THRU

20.00
J6

40
G1 8.00 THRU

B A1 C9 G2 8.00 THRU
B
B1 B3 B5 J1 G3
G4
8.00 THRU
8.00 THRU
F2 J5 G5 8.00 THRU

D1 E3 F6 G6 8.00 THRU
F5 J3
240.00

F1

240.00
H1 4.70 THRU

120
H2 4.70 THRU
DOWN 90° R 2 H3 4.70 THRU
15.00 A6 A8 H4 4.70 THRU
J1 6.80 THRU
J2 6.80 THRU

28.54
J3 6.80 THRU
20.00

J4 6.80 THRU
J5 6.80 THRU

40
J6 6.80 THRU
J7 6.80 THRU
J8 6.80 THRU
20 K1 7.20 THRU
K2 7.20 THRU

20.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR

13.00 GURGAON 122050 HARYANA (INDIA)
600.00 WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :24 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_24 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 30 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

D D

100.00

150.00

190.00
200.00

240.00
250.00
257.00
270.00

300.00

330.00
343.00
350.00
360.00

400.00
410.00

450.00

500.00

527.00
550.00

562.00
570.00
579.00
580.00
600.00
20.00
21.00
30.00
38.00

50.00
73.00
0

240.00
220.00 240.00
220.00
219.50
219.50
209.50 209.50
200.00 209.50
184.50 179.50
C 179.50 177.00 C
177.00 149.50
149.50 145.00
115.00 145.00
89.50 115.00

59.00 89.50
53.50 89.50
45.00 53.50
30.00 45.00
20.00 30.00

20.00 20.00
B B
0 0

Note-
Material- SS321
Thickness- 2mm
Qty- 2 Pcs(1LH+ 1 RH)
0

100.00
120.00

180.00

370.00

403.00

420.00

477.00
480.00
500.00
515.00
535.00
555.00
562.00
570.00
579.00
580.00
583.00
600.00
17.00
20.00
30.00
45.00
50.00
65.00
85.00

200.00

230.00

250.00

270.00

300.00

330.00

353.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :24 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_24 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 31 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321 TAG
A1
SIZE
6.50 THRU
Thickness- 2mm A2 6.50 THRU
D Qty- 1 Pcs B1 5.30 THRU D
B2 5.30 THRU
B3 5.30 THRU
479.17 B4 5.30 THRU
B5 5.30 THRU
11.54 11.54
B6 5.30 THRU
C10 C12 B7 5.30 THRU
B8 5.30 THRU
C2 C4 C6 C8 B10 B9 5.30 THRU
460.00 B6 B12 B10 5.30 THRU
13.50

B11 B11 5.30 THRU

D3 D6 B12 5.30 THRU
C1 9.80 THRU
C2 9.80 THRU
2.00 C3 9.80 THRU
THK C4 9.80 THRU
C C

DOWN 90° R 2
C5 9.80 THRU
C6 9.80 THRU

DOWN 90° R 2
C7 9.80 THRU

680.00
A2
C8 9.80 THRU
D2 D5 C9 9.80 THRU
C10 9.80 THRU
A1 C11 9.80 THRU
B5
E4 B9 C12 9.80 THRU
E3 B8 D1 120.00 THRU
E2 F2 B7
B3 D2 120.00 THRU
E1 F4 F6
B1 B4 D3 120.00 THRU
D4 120.00 THRU
D1 D4 D5 120.00 THRU
680.00

D6 120.00 THRU
680.00

E1 3.50 THRU
B B2 F3 E2 3.50 THRU B
F1 F5
E3 3.50 THRU
C1 C3 C5 C7 C9 C11 E4 3.50 THRU
F1 5.40 THRU
F2 5.40 THRU
F3 5.40 THRU
F4 5.40 THRU
F5 5.40 THRU
F6 5.40 THRU

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

13.50
A 460.00 PART NO. :25 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_25 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 32 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321

170.00

245.00

290.00

370.00
375.00

417.00
435.00
438.00
460.00
50.00
Thickness- 2mm

0
D Qty- 1 Pcs D

680.00 680.00
665.00
640.00

618.00 628.00
605.00

555.00

C C

385.00

340.00 264.00

295.00
250.00
267.00
236.00 239.00
226.00 227.00
210.00
B 205.00 B
180.00 195.00

125.00

50.00 48.00
15.00
0 0 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A A
0

170.00

245.00
290.00
310.00

410.00
425.00

460.00
25.00
40.00
50.00

327.00
370.00
380.00
405.00

445.00

PART NO. :25 WEIGHT- KG

CUSTOMER NAME: PART NAME : HB1_25 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 33 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

NOte-
Material- SS304
D Thickness - 1mm D
Qty- 1Pcs

C C

401.00
15.00

10.00
5 0
6.
0 0
10.00

110.00
3 0
R

B B

401.00

20.00

110.00
10.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :26 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_26 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 34 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

NOte-
D Material- SS304 D
Thickness - 1mm
150.00 Qty- 1Pcs
38.25

1 0
R

6.50

C C

169.00

160.00
10.50
6.00

B B

32.75
32.75

10.00

160.00
38.25

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :27 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_27 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 35 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

NOte-
Material- SS304
D Thickness - 1mm D
Qty- 1Pcs

166.00
8.00

8.00
157.00
6.00

C C
6.50
0
R1

B B
166.00

2.20
13.00
6.50

56.25

157.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :28 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_28 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 36 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

M5 Thread
NOte-
D Material- SS304 D
Thickness - 1.5mm
Qty- 1Pcs

293.50
15
R

C C

30.25
6.50

B 293.50 30.25 B

6.50
6.50

287.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :29 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_29 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 37 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
TAG SIZE
NOTE A1 6.80 X 11.80
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. A2 6.80 X 11.80
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES. A3 6.80 X 11.80
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. A4 6.80 X 11.80
512.55 A5 6.80 X 11.80
A6 6.80 X 11.80

27.86
29.43 A7 6.80 X 11.80
DOWN 90° R 3 A8 6.80 X 11.80
B1 15.00 THRU
36.30 C2 C3 B2 15.00 THRU
D C1 C4 C5 C6 D

43.93
30.80 M3
C1 10.40 THRU
F6 J3 C2 10.40 THRU
21.30 F2 F4 F8 P1 C3 10.40 THRU
16.30 K2 27.86 C4 10.40 THRU
15.80 A8 C5 10.40 THRU
0 R3 C6 10.40 THRU
A7 L2 L4 D1 2.80 THRU

DOWN 90° R 3
D2 2.80 THRU
0

122.50

179.00

252.60
254.00

299.00

351.70
379.00
417.60
419.00
458.20
477.20
19.00
34.60
39.60
57.60
59.00

D3 2.80 THRU

DOWN 90° R 3
D3 D4 2.80 THRU
J1
A6 D6

551.55
D5 2.80 THRU
M2 D6 2.80 THRU
R2 D7 2.80 THRU
477.20 L1 L3 D8 2.80 THRU
A5 E1 10.20 THRU

30.80
39.60 15.
Note-
F1 6.80 THRU
00 37.60
13.36 F1 F3 F5 F7 F9 F2 6.80 THRU

Material- SS321 D2 D5
A4 D1 K1 D7D8
R1 F3
F4
6.80 THRU
6.80 THRU
A3
C Thickness- 3mm D4 F5 6.80 THRU
C

49.43
A2 H2 H4 F6 6.80 THRU
A1 E1
15
.00 19.00 Qty- 1Pcs H1 H3
T1 J2 F7 6.80 THRU
36.30

10

F8 6.80 THRU
16.30

M1

78.93
19.00 G1
.4

M8 Thread DOWN 90° R 3

F9 6.80 THRU
0

F10 6.80 THRU

B1 F10 B2 G1 75 X 14
H1 10.00 X 18.00
477.20 45.03
30.80 H2 10.00 X 18.00

33.36
H3 10.00 X 18.00
Note- 43.93 H4
J1
10.00 X 18.00
5.50 THRU

5.50
Material- SS321 J2 5.50 THRU

3.00
Thk
J3 5.50 THRU
Thickness- 3mm

99.00
6.80 K1 4.00 THRU

9.80
Qty- 2Pcs
K2 4.00 THRU
L1 119.50 THRU
0 L2 119.50 THRU
. 5 10 482.20 L3 119.50 THRU
1 9
1 L4 119.50 THRU
11.80

27.80
M1 9.80 THRU

B M2 9.80 THRU
B
150.00

M3 9.80 THRU
60.20
5 0 P1 3.00 THRU
9. R1 10.00 THRU
80 1 1
9. R2 10.00 THRU
496.20

400.00 R3 10.00 THRU

496.20

Note- T1 75 X 14
125.5
Material- SS321

33.30
125.50
Thickness- 8mm
Qty- 1Pcs 22.00 18.00

6.80
6.8 14.00
247.20

0
2.

PLOT. NO. 89 SECTOR 3 IMT MANESAR

30.80
48.50

80

GURGAON 122050 HARYANA (INDIA)

75

WEBSITE: WWW.AVENGINEERS.CO.IN

A A
THK

PART NO. :30 WEIGHT- KG

8

CUSTOMER NAME: PART NAME : HB1_30 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

35 36.30
3.00 131.00 DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM
Thk FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 38 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
Note-
Material- SS321
Thickness- 3mm

139.00

303.00
150.00
178.00

199.00
225.10

327.20

354.70

423.00

458.20
477.20
101.50

147.00

188.00

333.00
19.00

78.00

99.00
80.00
Qty- 1Pcs
D 0 D
496.20
477.20
473.20
455.20 455.00

412.20

374.20
370.20

C C

296.20
284.70

253.20

220.20 220.20
208.20

127.20 150.00

140.00
B 112.20 B
130.00
100.00
128.50
89.20 118.50
86.20
112.20
74.20
56.20 73.20
48.50
37.20
37.20
33.20 19.00
0 0 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :30 WEIGHT- KG A

148.00
92.00
0

117.00
125.50
131.00
144.00

179.00
200.00
225.10

333.20
346.20
360.20

423.00

458.20
477.20
15.00
34.60
61.00
75.20

CUSTOMER NAME: PART NAME : HB1_30 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 39 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
NOte-
Material- SS304
Thickness - 1mm
D Qty- 1Pcs D

30.00
415.00

15.00 15.00

C 0 0 C
0.
10.00

R3
85.00

415.00
B B
400.00 6 .50
2.10

10.00

10.00
46.50

46.5
20
10.00

15

85.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :31 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_31 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 40 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321
D Thickness- 4mm D
Qty- 2Pcs

60.00

60.00

25.00
6.80

C C

10
UP 90° R 4
9.50

59.67
25.00

B B

6.80
42.50

42.50
10.80

13.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
11.00 38.00
4.00
A Thk PART NO. :32 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_32 REVISION : NA
60.00 MATERIAL:
PROJECT NAME : HB1_Assembly_01

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 41 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321
D
Thickness- 4mm D
Qty- 1Pcs

59.97

100.00

5.00
C C
25.00
8.00

100.00
UP 90° R 4
76.00
12.00 76.00

25.00
100.00
42.80

6.80

42.80
B B
16.80

6.50

21.08

12.00 76.00 4.00

Thk

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :33 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_33 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 42 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE

Note-
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Material- SS321
Thickness- 2mm
Qty- 1Pcs
D D

115.58

150.00
17.50

6.20
C C

150.00

UP 90° R 2
41.30
12.00
24.50

65.00

24.50

B 12.80 B
22.80
22.54

95.00
95.00

12.80
40.00

40.00

30 30.00
2.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
Thk
150.00 WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :34 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_34 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 43 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1

Note-
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Material- SS321
Thickness- 3mm
Qty- 2Pcs (1RH + 1LH)
D D

62.76
115.55

UP 90° R 3

23.66 62.76
680

650.00

C 618.00
0
C
0. 2

UP 90° R 3
UP 90° R 3
1

737.65
59.70

3.00
30

100.00 100.00 100.00

100.00 100.00 180.00

10
0
0

35.00
50 UP 90° R 3

60
5

.5

50
.
3.

.2
13

12
B 30.00 B

8.

8.

0
50.00 50 35 21 30 220.00
17.50

17.50

62.76
13.00
618.00 65.70
680.01

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :35 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_35 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 44 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
TAG SIZE
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
Note- A1 6.80 X 11.80
A2 6.80 X 11.80
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. Material- SS321 A3 6.80 X 11.80
A4 6.80 X 11.80
Thickness- 3mm A5 6.80 X 11.80
A6 6.80 X 11.80
Qty- 1Pcs A7 6.80 X 11.80
A8 6.80 X 11.80
B1 2.80 THRU
D B2 2.80 THRU D
512.55 B3 2.80 THRU
B4 2.80 THRU
D1 D2 D3 D4 D5 D6 B5 2.80 THRU
B6 2.80 THRU
477.20 M2 UP 90° R 3 B7 2.80 THRU

30.80
H1

27.86
36.30
30.80

E2 B8 2.80 THRU
H3 M4 H4
16.30

13.36 E4 E5 E7 K5 B9 2.80 THRU

120 75 45 80 40 C1 15.00 THRU
A8
N3 C2 15.00 THRU
A7 L2 L4 D1 10.40 THRU
K4
D2 10.40 THRU
D3 10.40 THRU
D4 10.40 THRU

UP 90° R 3
B4 K1

UP 90° R 3
15.00

A6 B7 D5 10.40 THRU

551.55
K3 D6 10.40 THRU
N2 E1 6.80 THRU
477.20 L1 L3 E2 6.80 THRU
A5
C M1
E3 6.80 THRU C
19.00 E4 6.80 THRU
K2
E1 E3 H2 E6 E8 M3 E5 6.80 THRU
A4 B1 B3 B6R1 N1 E6 6.80 THRU
B8 B9
A3 B2 B5 E7 6.80 THRU

99.00
A2 F1 J2 J4 E8 6.80 THRU

19.00
A1 F1 10.20 THRU
15 J1 J3 G1 75 X 14
G1 UP 90° R 3 P1 H1 4.00 THRU
6.80 H2 4.00 THRU
C1 C2
5.00

119.5

H3 4.00 THRU
H4 4.00 THRU

150.00

33.36
15.00 J1 10.00 X 18.00
27.86 J2 10.00 X 18.00
J3 10.00 X 18.00
Note- 482.20
J4 10.00 X 18.00

Material- SS321
K1 5.50 THRU
10.0

27.80
0 K2 5.50 THRU
Thickness- 3mm K3 5.50 THRU

496.20
B K4 5.50 THRU B
Qty- 2Pcs K5 5.50 THRU
496.20

L1 119.50 THRU
L2 119.50 THRU
L3 119.50 THRU
L4 119.50 THRU
Note- 400.00
M1 6.00 THRU

Material- SS321 M2 6.00 THRU

10

M3 6.00 THRU
Thickness- 8mm

33.30
M4 6.00 THRU
48.50

19.00

N1 10.00 THRU
Qty- 1Pcs N2 10.00 THRU
18 N3 10.00 THRU
P1 75 X 14
R1MANESAR
PLOT. NO. 89 SECTOR 3 IMT 4.50 THRU
GURGAON 122050 HARYANA (INDIA)
14.00 19.00 WEBSITE: WWW.AVENGINEERS.CO.IN
34.60
75.00

A PART NO. :36 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_36 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 45 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1

101.50

138.00
144.00

150.00
178.00

199.00

327.20

338.00

404.00

477.20
123.00

238.00

244.00

264.00
15.00

78.00
80.00

99.00
0
D 496.20 D
477.20 473.00 477.20

448.20
468.00
468.00

455.20 397.20

412.20 368.20
370.20
374.20

370.20

C 296.20 C
284.70
268.20
247.20
220.20
220.20
208.20
150.00
168.20
130.00
168.00
127.20
150.00
118.50
21 142.80
112.20
140.00
B 100.00 B
130.00
89.20
86.20
74.20
56.20
48.50
11.00 19.00
0 0 0

36.30
5.50
0
0

117.00
122.50
15.00
30.00
34.60
39.60
61.00
78.20
78.00
92.00
99.00

144.00
178.00
199.00

200.00
244.00
264.00

329.00

333.20
351.70

360.20

458.20

477.20
143.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :36 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_36 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 46 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1

Note-
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.

Material- SS321
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Thickness- 2mm
Qty- 4Pcs
D 33.00 D
60.00

2.00
THK
26.30

24.34
DOWN 90° R 2

C C

77.77
DOWN 90° R 2
60.00

10.00

24.34
40.00
B B
60.00

8.0 PLOT. NO. 89 SECTOR 3 IMT MANESAR

0 GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
33.00
A PART NO. :37 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_37 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 47 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS316
Thickness- 1.2mm
D Qty- 1Pcs D

515.30
30.00

631.00
UP 90° R 1.2

28.83
C 28.83 C

UP 90° R 1.2

UP 90° R 1.2
686.30
631.00 30
42 52 10.00

40

55
38
30
28.83
12.00

28.83
B 6.00
460.00 B

UP 90° R 1.2

460.00
76
235.00
177.00

30

38
90.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
55

A PART NO. :38 WEIGHT- KG A

12.00 CUSTOMER NAME: PART NAME : HB1_38 REVISION : NA

75 PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 48 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321 green paint
D Thickness- 2mm D
2.00
Qty- 1Pcs

70.00

00
6.
2.00
12.00

9.00 52.00

C C

30.00
6.00

100.00
100.00

76.00

B B

42.00

70.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :39 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_39 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 49 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

D Note- D
Material- SS321
Thickness- 8mm
Qty- 1Pcs
68.00
8.00

8.00 52.00
0 0
7 .
8.00

C C
30.00
50.00

100.00
100.00

76.00
24
.00

B 8.50 B

PLOT. NO. 89 SECTOR 3 IMT MANESAR

27.00 GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
68.00
A PART NO. :40 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_40 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 50 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS304
32.00
Qty- 2Pcs
D D

7.00 5.00

40.00
32.00
44.00

C C
30.00

2 x M5x 15 Thread
7.00

64.00

1 0
.

5.00
B R6 B
12.20
12.20

A A

SECTION A-A
SCALE 5 : 1
44.00
32.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :41 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_41 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 51 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

D D

Note-
30.50 Material- SS304
Qty- 2Pcs
44.00

C C
30.00

8.50

44.00
00
5.

B B

R6.10

12.20
12.20

30.50

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :42 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_42 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 52 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
2xM6 Press Fit Nut Thickness- 2mm
D Qty- 2Pcs D

44.00 56.08

2.00
Thk
18.00

C C

DOWN 90° R 2
56.00
18.00
44.00
6.00
11.00

15.00
0 0
8 .

B B
60.00

38.00

60.00

30.00
16.04

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

10
A PART NO. :43 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_43 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 53 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
Material- SS321
D Thickness- 2mm D
Qty- 4Set
2.00

60.87

C C
60.00

95.00

95.00
B B

60.87 PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. : WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Hinge Assembly REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 54 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
Thickness- 2mm
D Qty- 4Pcs D

16.20 16.20
60.00 27.60

C UP 109° R 3 UP 109° R 3 C

16.20 16.20

48.27
16.20 27.60 16.20

B B
35.75

11.00

35.75
60.00
7.00

10

40.00
2.00 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
Thk WEBSITE: WWW.AVENGINEERS.CO.IN

60.00
A PART NO. :44 WEIGHT- KG A
CUSTOMER NAME: PART NAME : HB1_Hinge_01 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 55 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE

Note-
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.

Material- SS321
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Thickness- 2mm
Qty- 4Pcs
D D

UP 261° R 3

60.00

UP 8° R 2.4
11.08

C C

52.28
60.00

B B
7.00
35.12

35.12
22.50

11.00

40.00
2.00
THk
60.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :45 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Hinge_02 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 56 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.

Note-
D Material- SS304 D

5.00
Qty- 4Pcs
22.50

22.50

C C

95.00
95.00

B B

5.00
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :46 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Hinge Pin REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL:

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 57 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED.
Note-
Material- SS321
2xM8 Press fit nut
Thk- 1.6mm
Qty-1Pcs
D 137.60 D

DOWN 90° R 1.6

11.61

DOWN 90° R 1.6

DOWN 90° R 1.6
DOWN 90° R 1.6
1246.73
C C

20.00 1070.00 103.00

0
50

30.00
.
15

4
75.00
45.00

40.00 200.00 200.00 200.00 200.00 200.00 153.00

75.00
DOWN 90° R 1.6
15.18
30.00

B 28.83 B
54.91

30.00
15.00

12.00
1193.00

10
.20
PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :47 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Part_44 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS321

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 2:1

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 58 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. TAG SIZE
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. Note- A1
A2
15.00 X 30.00
15.00 X 30.00

Material- SS321 A3
B1
15.00 X 30.00
11.00 X 30.00

Thk- 4mm B2
B3
11.00 X 30.00
11.00 X 30.00

Qty-1Pcs B4
B5
11.00 X 30.00
11.00 X 30.00
D B6 11.00 X 30.00 D
C1 15.00 X 29.50
C2 15.00 X 29.50

239.48

88.24

A3 B3 C2 B6

C C

700.00

UP 90° R 4
92.00
A2 B2 B5

25.00
0
0

350.00

675.00
700.00
25.00

92.00
0
B B
155.00 0 A1 B1 C1 B4

111.00
71.00
31.00
0 155.00
0

350.00

675.00
700.00
25.00

PLOT. NO. 89 SECTOR 3 IMT MANESAR

GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :48 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Part_45 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS321

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 59 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. TAG SIZE
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. Note- B1 11.00 X 30.00

Material- SS321 B2
B3
11.00 X 30.00
11.00 X 30.00

Thk- 4mm B4
B5
11.00 X 30.00
11.00 X 30.00
Qty-1Pcs B6 11.00 X 30.00
D C1 10.50 THRU Welded Nut M8 D
C2 10.50 THRU Welded Nut M8

12
C3 10.50 THRU Welded Nut M8
C4 10.50 THRU Welded Nut M8
C5 10.50 THRU Welded Nut M8
C6 10.50 THRU Welded Nut M8
D1 12.20 THRU
D2 12.20 THRU

Note-
SS304 284.96
Qty-
5.50

30
2Pcs 2x 12x 30mm Pin Welded B6 B3
C3 D2 C6
SS304

12
C C

111.00

DOWN 90° R 4
6xM8 Nut welded

UP 90° R 4
85.00

700.00
26.00 B5 B2 C2 C5
0
0

350.00

675.00
700.00
25.00

111.00
26.00

85.00
0
B B
211.00 211.00
195.75 195.75
155.00 B4 B1 C1 D1 C4
111.00 111.00
71.00 71.00 56.24
31.00 31.00 133.72
0 0
4.00
THK PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
0

350.00

675.00
700.00
25.00

A PART NO. :49 WEIGHT- KG A

CUSTOMER NAME: PART NAME : HB1_Part_46 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS321

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 60 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc.
Note-
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. SS321
Qty- 1Pcs
Thk- 2mm
D 763.48
D
40.00
22.00 F2 F6 F8 D5
0 D1 D2 D3 F1 F3 F4F5 F7 D4 D6
UP 90° R 2
C5 C10
0

345.50

670.50
691.00
20.50

A2 A4

C4 C9

C3 C8

734.48
662.00 662.00 A1 A3
620.50 E1 H1
C 561.00 C2 C7 C

UP 90° R 2

UP 90° R 2
381.50
C1 G2 C6
TAG SIZE UP 90° R 2
A1 20.00 THRU
265.00 A2 20.00 THRU B1 G1 B2
251.50 A3 20.00 THRU
A4 20.00 THRU
38.12

38.12
B1 13.90 THRU
181.50 B2 13.90 THRU
C1 10.00 X 22.00
C2 10.00 X 22.00
101.00 C3 10.00 X 22.00
C4 10.00 X 22.00
B 61.50 70.00 C5 10.00 X 22.00 B
C6 10.00 X 22.00
C7 10.00 X 22.00
0 0 C8 10.00 X 22.00
C9 10.00 X 22.00
C10 10.00 X 22.00
D1 4.20 THRU
0
20.00
40.00
0

100.50

295.50
345.50
395.50

590.50
670.50
691.00
20.50

D2 4.20 THRU
D3 4.20 THRU
D4 4.20 THRU
D5 4.20 THRU
D6 4.20 THRU
E1
F1 3.00 THRU
F2 3.00 THRU
40.00
F3 3.00 THRU
F4 3.00 THRU
20.00 F5 3.00 THRU
F6 3.00 THRU PLOT. NO. 89 SECTOR 3 IMT MANESAR
0 F7 3.00 THRU
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN
F8 3.00 THRU
G1 10.00 THRU
A G2 10.00 THRU PART NO. : 50 WEIGHT- KG A
0

188.00
303.00
334.00
355.00
387.00
474.00
502.00
520.00
540.00
561.00
616.50
634.50
680.50
691.00
73.00

H1
CUSTOMER NAME: PART NAME :HB1_Part_47 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS321

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:5

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 61 OF 62

6 5 4 3 2 1
 6 5 4 3 2 1
NOTE
1. MATERIAL TO BE FREE OF DEFECTS, SCRATCHES,BUR AND SHARP EDGE etc. Note-
2. FOR FURTHER DETAIL & DIMENSION, REFER TO 3D FILES.
3. WELDING TO BE UNIFORM & WELD SPATTERS TO BE REMOVED. SS321
Qty- 2Pcs(1L+1R)
Thk- 2mm
D D
77.24

B5
39.12

40
41

37 B4

41.00
37 B3
C C

UP 90° R 2
33

B2
223

655.24
622

622.00
114

B B
54

B1
UP 90° R 2
A1
TAG SIZE
104

A1 10.00 THRU
B1 10.00 X 16.00
B2 10.00 X 16.00
B3 10.00 X 16.00
15.50
B4 10.00 X 16.00
B5 10.00 X 16.00
40 PLOT. NO. 89 SECTOR 3 IMT MANESAR
GURGAON 122050 HARYANA (INDIA)
WEBSITE: WWW.AVENGINEERS.CO.IN

A PART NO. :51 WEIGHT- KG A

CUSTOMER NAME: PART NAME : SB1_Part_48 REVISION : NA

PROJECT NAME : HB1_Assembly_01 MATERIAL: SS321

DRAWN BY CHECKED APPROVED Q.A. DATE THICKNESS: MM

FAISAL MR. RAHUL MR. RAHUL MANOJ 28-08-2024 SURFACE FINISH : SCALE : 1:2

ALL DIMENSIONS ARE IN MM OTHERWISE GENERAL TOLERANCES SHALL BE AS PER STANDARD SURFACE COLOUR : NA SHEET SIZE: A0
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AV ENGINEERS. ANY REPRODUCTION IN
PART OR AS A WHOLE (ASSEMBLY) WITHOUT THE WRITTEN PERMISSION OF AV ENGINEERS IS PROHIBITED. SPECIFIED 0...6 6...30 30...120 120...400 400...1000 1000...2000
0.1 0.2 0.3 0.5 0.8 1.2 DO NOT SCALE THE DRAWING SHEET 62 OF 62

6 5 4 3 2 1