Steam Generation
Solutions
Trusted Names You Know
For years, the Coen and Hamworthy Combustion brands Trading Partner:
Aliado Comercial:
have stood for the most advanced science and technology
in oil and gas combustion. Today, these products are a part
of John Zink Hamworthy Combustion, where we combine
our technological expertise, vast resources and industry
experience to provide the world’s most advanced selection
of innovative steam generation solutions. This includes burner, HOUSTON, TX - USA + 1 281.469.1423
[email protected]igniter, safety system and ancillary products, all designed to
deliver optimal environmental and economic performance. ferrumenergy.com
Custom Engineering and Superior Support We have tens of thousands of
burners installed worldwide, in a
With innovative technology solutions and extensive experience wide range of industries.
from an unrivaled installed base, our engineering experts have
the resources to meet your combustion needs. From fundamental
burner products to complex systems and complete package
options, we develop customized solutions for your specific
application and can provide turnkey installation, helping you
meet even the toughest requirements. After installation, our
team of dedicated in-house engineers and our network of
factory-trained field technicians are available worldwide to
provide immediate evaluations and service, keeping your
system performing reliably and efficiently for years to come.
+ Installation supervision and start-up assistance
+ Emissions compliance pre-testing
+ Instrumentation calibration for efficiency and safety
+ Inspections and preventative maintenance
+ Emergency service and spare parts
+ Parts recommendations and equipment evaluations
+ Operator training / education
Advanced Research, Development, and Testing
Our industry-leading design engineering and product
development includes full-scale burner testing, simulation
and modeling techniques, offering an in-depth analysis
of current combustion systems as well as engineered
solutions to maximize performance.
Research and Development
Our research and development test center is the largest
and most advanced testing complex of its kind. This
exclusive resource allows us to push innovation and gain
expertise while measuring performance in a full-scale
setting, replicating specific real-world conditions.
Modeling Services
Using state-of-the-art computational fluid dynamics (CFD)
modeling techniques, we can maximize your facility’s
operating performance and achieve your emission
requirements. With CFD analysis, we can predict and
improve: air distribution, flame characteristics and
pollutant formation for optimal combustion.
RESEARCH AND DEVELOPMENT TEST CENTER
Customers come from around the globe to our International Research and Development Test Center.
VARIFLAME BURNER
The Variflame™ burner delivers high-efficiency performance in gas-fired package boilers
with NOx emissions as low as 20 ppm (41 mg / Nm3 ) at 3 percent O2.
Gas and Oil Burners
We have the most burner installations in the industrial steam generation industry, making Coen and Hamworthy Combustion
brand burners a preferred choice for reliable, proven low NOx performance. We offer a range of burner designs to accommodate
variable fuels, emission levels, boiler types and flame geometry. Our low NOx burners efficiently lower NOx emissions by minimizing
the amount of flue gas recirculation (FGR) required. They can easily achieve 30 ppm (62 mg / Nm3) to as low as 20 ppm (41 mg /
Nm3) firing gas, with some applications meeting these levels without the need for FGR. These burners can also achieve NOx levels
of 40 to 80 ppm (82 to 164 mg / Nm3) firing light oil and 190 to 220 ppm (400 to 450 mg / Nm3) firing heavy fuel oil.
+ Advanced designs
+ Rugged construction
+ Dependable performance
+ Ideal for single or
multi-burner applications
DYNASWIRL-LN™ BURNERS QLN® BURNER
The Dynaswirl-LN burner offers maximum reliability and QLN (Quantum Low NOx®) burners deliver low NOx
low emissions for oil and gas firing multi-burner boilers. without flue gas, and are the proven choice for Once
Through Steam Generator (OTSG) applications.
RMB (RAPID MIX BURNER)
The ultra-low NOx RMB™ (Rapid Mix Burner) can cut costs and space requirements,
providing a proven alternative to the catalytic control of NOx emissions.
Ultra-Low NOx Burners
Our ultra-low NOx burners help you meet the most stringent emissions requirements year after year. We have proven experience
in developing efficient, reliable and safe ultra-low NOx burner technologies, products and systems for the steam generation
industry. Our innovative burners are designed to efficiently lower NOx emissions by minimizing the amount of FGR required.
We offer several ultra-low NOx burner models that can meet a range from 15 ppm (31 mg / Nm3) to less than 5 ppm (10 mg / Nm3)
NOx depending upon your emission requirements. Our burners can achieve the ultra-low NOx levels you require, in most cases
eliminating the need for back-end selective catalytic reduction (SCR) equipment.
+ Compact flames
+ Reliable operation
+ Easy-to-use controls
+ Excellent burner turndown
ECOJET® BURNER QLN-II™ BURNER
The ECOjet ultra-low NOx burner offers extremely The QLN-II burner delivers ultra-low NOx performance
reliable performance and high turndown. with low excess air, low burner pressure drop and low
FGR rates.
Specialty Combustion Products
Low Calorific Gas
Our Low Calorific Value (LCV) burners are designed to combust fuels with mass flows too large for conventional burners
such as blast furnace gas. This allows low pressure waste and process gases to be used for sole or joint power generation.
Our unique burner design uses air velocity to mix LCV gas into the furnace for complete combustion and low CO levels.
Solid Fuels
The use of by-products as a source of energy can replace fossil fuels and minimize difficult disposal problems. Our combustion
systems can be found throughout the world serving the agricultural, pulp and paper, forest products, and food processing
markets for low-cost energy generation.
Back-End Cleanup
In addition to providing leading burner technology for a variety of applications, we also offer complete Selective Catalytic
Reduction (SCR) systems for new or existing boilers. Our systems can accommodate a wide range of reagents, temperatures,
and configurations.
Safety Systems, Combustion Controls, and Ancillary Products
Because plants often need more than a burner to
solve their challenges, we also offer state-of-the-art
equipment to support our burners, including burner
management systems, control systems, flame scanners,
valve piping skids, cooling air blower skids and
combustion air fans. Each system is engineered for an
BMS and
individual plant’s specific requirements and evaluated Control Panels
for fuel-firing configuration, individual burner
characteristics, operation requirements and operator
interface preference.
+ Enhanced flame scanning technology
+ Pre-designed or custom control
systems with operator interface
+ Standard or customengineered
burner management system
+ Wide range of Distributive Control Fuel Piping and
Blower Skids
Systems (DCS) or Programmable
Logic Controller (PLC) platforms
+ Predictive Emissions Monitoring (PEM)
Exceptional Experience
Today’s industrial enterprises are challenged to expand capacity while meeting ever-increasing safety, efficiency, and performance
standards. Through our Coen and Hamworthy Combustion brand products, John Zink Hamworthy Combustion is world-renowned
for reliability, efficiency and innovation in combustion system applications and installations. We have been an innovative force
in combustion systems – delivering technological expertise, design excellence, practical application and quality research and
development with proven performance. Today, we continue the advancement of combustion equipment and technology to meet
existing and emerging challenges in markets around the globe.
Reliable Support
Our worldwide service organization is the largest, most technically advanced team of its kind. Our experts are trained
in the latest technologies to evaluate existing systems for upgrades and retrofits, to troubleshoot operations (with
emergency call-out 24/7), and to help plan your next turnaround or outage. With our Preventative Maintenance (PM)
program, we can also help you reduce unplanned downtime, avoid possible emergency call-outs, and ensure maximum
availability and extended operating life of your equipment.
Learn more about how we can help improve
the safety and performance of your operation.
Contact us today. 1 800 755 4252
Trading Partner:
Aliado Comercial:
HOUSTON, TX - USA + 1 281.469.1423
[email protected] ferrumenergy.com
GLOBAL REACH
JZHC has locations all over the map,
with thousands of employees worldwide.
Global Headquarters Tulsa, Oklahoma | United States
johnzinkhamworthy.com | +1 918 234 1800
To locate an office in your region, visit johnzinkhamworthy.com/contacts/office-locator
©2019 John Zink Company LLC. For information on patents and trademarks, see johnzinkhamworthy.com/legal-notices COEN-18-95054
