Principles of Digital Communications - - Unit 6 ... https://onlinecourses.nptel.ac.in/noc18_ee27/un...
[email protected] ▼
Courses » Principles of Digital Communications
Announcements Course Ask a Question Progress Mentor FAQ
Unit 6 - Week
5
Course
outline
Assignment 5
The due date for submitting this assignment has passed.
How to access As per our records you have not submitted this Due on 2018-09-12, 23:59 IST.
the portal assignment.
Week 1 1) A random signal is modeled as a stationary process X(t). At any time instant t, the value 1 point
of the signal is a random variable with probability density function (pdf) fX (x) shown in the figure
Week 2
Week 3
Week 4
Week 5
Lecture 24 :
Probability of
Error for M-ary
Scheme below.
Assume the bandwidth of this process to be 5 kHz. The random signal is passed through a uniform
Lecture 25 :
quantizer with sampling frequency equal to the Nyquist rate and 32 quantization levels for transmission
Pulse Code
Modulation : using a binary PCM system. Signal-to-Quantization Noise Ratio (SQNR) is defined as the ratio of the
Quantization average signal power to the average quantization noise power. For the above signal, the resulting
SQNR in dB is approximately
Lecture 26 :
Uniform
Quantizer
21
Lecture 27 :
Step Size and
Quantization 23
Noise
Lecture 28 :
Non-uniform
25
Quantizer
(Lloyd-Max
Quantizer)
27
Download No, the answer is incorrect.
Videos Score: 0
Weekly Accepted Answers:
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
Feedback
A project of
27 In association with
Quiz : 2) In Question-1, suppose the sampling frequency is not equal to Nyquist rate, and a guard 1 point
Assignment 5 band of 2 kHz is provided. The available channel bandwidth for PCM transmission is 40 kHz. Given
Assignment 5 -
that the minimum bandwidth required for binary PCM transmission is half the bit rate, the maximum
Funded by
Solution achievable SQNR in dB is approximately
1 of 3 Friday 09 November 2018 10:03 AM
Principles of Digital Communications - - Unit 6 ... https://onlinecourses.nptel.ac.in/noc18_ee27/un...
Powered by
Week 6
27
Week 7
29
Week 8
Week 9 31
Week 10
33
Week 11 No, the answer is incorrect.
Score: 0
Week 12
Accepted Answers:
33
3) Consider a random signal with values drawn independently at each instant, from the 1 point
probability distribution shown below.
For uniform quantization with 2 levels and ν ≥ 3, the SQNR in terms of q is
ν
0.1q 2
0.2q 2
0.7q 2
0.9q 2
No, the answer is incorrect.
Score: 0
Accepted Answers:
0.7q 2
4) Five signals each of bandwidth 1 kHz are multiplexed and transmitted using binary PCM. The
maximum tolerable error in sample amplitudes is 0.2% of the peak amplitude. The signals are to be
sampled at least 20% above the Nyquist rate. Given that the minimum bandwidth required for a binary
PCM transmission is half the bit rate, the minimum bandwidth required in kHz is
No, the answer is incorrect.
Score: 0
Accepted Answers:
(Type: Range) 53.5,54.5
1 point
5) A sample function of a zero-mean, unit-variance Gaussian random process is uniformly sampled. It
2 of 3 Friday 09 November 2018 10:03 AM
Principles of Digital Communications - - Unit 6 ... https://onlinecourses.nptel.ac.in/noc18_ee27/un...
is then applied to a uniform quantizer with the following input-output characteristic.
The entropy (in bits) of the quantizer output is
No, the answer is incorrect.
Score: 0
Accepted Answers:
(Type: Range) 1.9,1.95
1 point
Previous Page End
3 of 3 Friday 09 November 2018 10:03 AM
