1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Notes
A (1) change the entrance nozzle of natural gas line to be above the A
½"
8"
entrance nozzle of treated fuel gas line at fuel gas drum 34-D-3.

(2) drains shall be located at the lowest points, while vents shall
4"
4"
be located at the highest points.
To Flare Header
½" Note (7)
(3)Lines Design Pressure = 8.2 kg/cm².g while lines Design
B
8"
8"
Temperature = 75ᵒC. B

Fuel gases from Tie-in

½" (4) Flare line shall be proper slopped (0.2%) with no pockets.
4"
4"
To Flare Header (5) Mist eleminator (Demister) thickness shall be 6 inch.
Natural Gas
8" ½" Note (7) 3K4
Set @ 7 bar.g 8" (6) Free space between Mist eleminator (Demister) and outlet
½"
Compensation Line 2" ½" nozzle shall be 6 inch.
C 4" C
3 FT
8" xxxx 8" 3K4
Set @ 7 bar.g
To Flare Header (7) Safety valve isolations shall be oriented horizontally or 45ᵒ.
2"
8" FI De-mister
Note (7)
xxxx ...
De-mister
To fuel gas Drum - Ball valve (open)
4"
34-D-3
Note (1)
Fuel gas Treatment 1" Fuel gas Treatment 8" - Gate valve (open)
D 10" PG D
Drum (34-D-2A ) PG
Drum (34-D-2B)
1" 3K4
2"
8" PI Set @ 8.2 bar.g
1"
- Ball valve (closed)
3"

8"
- Gate valve (closed)
In-Line Mixer
2" ½" 2" ½" E
E Fuel gases from old header 8" 8"
8" De-mister
½"
¾" ½" Existing
Inlet Diverter

¾" 2"
Inlet Diverter 8" ½" 34-D-1 New
8" 8" 8" PG
8"
Inlet Diverter 1"
8"

F In-Line Mixer F
½"
2"
24"
1" ½"
M.H

¾" ½"
LG LG

G 24" G
LLHH 4100 mm
24" M.H

M.H LLH 3750 mm LG

TG
1"
LLL 160 mm
HHLL 500 mm
¾" 1"
LLLL 50 mm TI
½" 2" ¾"
H ¾" H
2" 1" 2" ½" 1"
TG
½" TI ½" ½"
2" 2"
2" 2" 1" ½"
Utility inlet
1" 2" 2"
TG Utility inlet Utility inlet
2" 2" Vortex Breaker

Vortex Breaker Extended nozzle

I I
2"
Extended nozzle

FI 3" 2" 3 2"

FT
xxxx xxxx 3 2"
FAL
2"
3"

J J

2"
Fresh Soda To Quench drum
3 20/08/2024 Issued for approval
2"*3"
2 12/08/2024 Issued for approval

3" 1 21/11/2023 Issued for approval

To API
K 2" 2" K
0 6/7/2022 First Issue

Rev. Date Description BY Check. App.

Notice
THIS DRAWING HAS NOT BEEN PUBLISHED. IT IS THE SOLE PROPERTY OF CORC. IT IS LENT TO THE RECIPIENT FOR HIS CONFIDENTIAL USE ONLY, AND UPON THE
CONDITIONS AND AGREEMENTS FOLLOWING IN CONSIDERATION OF THE LOAN OF THIS DRAWING. THE RECIPIENT PROMISES AND AGREE TO RETURN IT UPON
REQUEST AND THAT IT SHALL NOT BE REPRODUCED, COPIED, LENT, OR OTHERWISE DISPOSED OF DIRECTLY OR INDIRECTLY WITHOUT CORC WRITTEN CONSENT, NOR
3" 3" BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF CORC.

PG PG Project Title
L
Fuel Gas Treatment Unit (U-34) L
Reforming Sector

CAIRO OIL REFINING COMPANY CORC

General Department of Tech. & Dev.

Scale CORC Project No. Drawing No. Rev.

Soda Pump Soda Pump Spare
None 1/1 3
M M

1 2 3 4 5 6 7 8 9 10 11 12 13 16 15