Datasheet
21-170 Fiber optic G.703 E1 Converter
Features 21-170 Fiber optic G.703 E1 Converter
• Fiber optic transmission, immune to EMI and RFI.
• Standards compliant for power substation installation.
• 19” mounting with only 200mm depth.
• Singel supply range from 48VDC to 230VAC.
Fiberoptic G.703 Codirectional37.94
The ITU-standard “G.703 64kbit/s codirectional interface” describes a galvanic interface. This interface is commonly
used by teleprotection equipment for connection to telecom multiplexers.
The 21-170 converts the codirectional interface signals to a proprietary fiber optic protocol used by teleprotection
equipment from ABB.
G.703/704 E1 Unbalanced
The ITU-standard G.703 describes the physical and electrical characteristics of hierarchical digital interfaces at
rates up to 140Mbps. G.704 describes frame structures on G.703 interfaces up to 45Mbit/s. E1 describes a galvanic
G.703 interface with G.704 frames at 2048kbps commonly used in
telecommunication.
The 21-170 product is part of a wide
Function product family of interface, speed
The 21-170 is a G.703 format converter between G.703/704 2Mbps and protocol converters.
interface and proprietary 64kbps fiberoptical interface. The optical
interface can be connected to other fiberoptical converters from Fibersystem also offer many related
Fibersystem as the 21-16xx (for X.21, RS.530, etc) or the 21-180 for products like Relay Trip Links,
balanced G.703. The 64kbps data is inserted and extracted from time slot Asynchronous Modems, 19” Rack
31 in the G.704 frame structure leaving the other time slots available for Based Interface Conversion and
other usage. The converter adapts the data rate to the incoming E1 signal Operator Station KVM extensions.
by a digital PLL or in a back to back configuration it can be set to use its
internal reference. The 21-170 product has been tested
FS17030 Datasheet 21-170 Fiber optic G.703 E1 Converter R1
and approved to be used with the
Usage REL and RED product lines from ABB
The 21-170, Fiberoptic G.703 E1 converter is intended to extend distance Power Technologies.
and to provide galvanic isolation for disturbance free insertion of 64kbit/s
data directly into a SDH/PDH 2Mbps G.703 connections by the use of the Fibersystem AB is an inventive
standard G.704 framing structure. The converter is compatible with the Swedish company who since
FOT module in ABB’s teleprotection terminals 550/560 for connecting the 1982 has been working with the
terminals to higher order networks. The 21-170 converter running of application of fiberoptic technology
its internal clock can also be used to directly interconnect protection in the delivery of solutions fulfilling
equipment over leased lines using electrical E1 modems such as SHDSL the Customers’ multitude of needs.
and alike.
Fibersystem AB Tel +46 8 564 828 80 E-mail: [email protected]
Gårdsfogdevägen 18B Fax +46 8 28 33 50 www.fibersystem.se
S-168 66 Bromma, Sweden VAT SE556606432501
Technical data
Fiber optic link
Protocol Fibersystem propriety 64kbps.
Fiber Multi mode 50/125um or 62.5/125um, ST-connector.
Optical system budget 13dB in 62.5/um. 9dB in 50/125um fiber.
Typical distance 0 - 2km (3dB system margin for 50/125um and 6dB for 62.5/125um)
Galvanic
Data speed 2048kbps.
Protocol G.703, E1
Connector 2 x BNC , Coaxial cable.
Power Supply
DC 48V DC to 250V DC, ±20%
AC 230VAC ±20%, 50−60 Ηz
AC-connector IEC 320, 3 pin.
Environmental
Operating temperature range -25 to +55 oC.
Storage teperature range -40 to +85 oC.
Relative humidity operating 5 to 95 % .
Relative humidity storage 5 to 95 % non condensing.
CE compliance
Immunity EN 61000-6-2
Emission EN 61000-6-4
LVD EN 50178; RIV = 250 V OVC = III
Mechanical
Vibration IEC 60255-21-1 Klass 2
Shock IEC 60255-21-2 Klass 2
Seismic IEC 60255-21-3 Klass 2
EMC compliance
ESD IEC 60255-22-2 Class 3, contact 6kV, air 8kV
Radiated IEC 60255-22-3 / IEEE/ANSI C37.90.2; 35V/m
Burst Power IEC 60255-22-1 Class III
Burst Communication IEC 60255-22-1 Class II; 0,5 kV diff; 1 kV common mode
Fast transient Power IEC 60255-22-4 Class IV
Fast transient Communication IEC 60255-22-4 Class II; 1kV
Insulation
Dielectric test IEC 60255-5, 2,0kV 1min
Impuls voltage test IEC 60255 / EN 50178 5kV / 6kV
Insulation resistance IEC 60255-5; > 100 Mohm at 500 VDC
Dimensions and Weight
Physical size The unit is intendend to be mounted in a 19” rack. By adjusting the mount brackets the
unit can also be mounted on a wall or similar
Heigth 45 mm, Width 483 mm (Witkout brackets 380mm), Depth 173 mm
Weight 3 kg
Ordering information
Product number Model Description
21-170 Fo modem G.703 E1 2Mb/s
Fibersystem AB Tel +46 8 564 828 80 E-mail: [email protected]
Gårdsfogdevägen 18B Fax +46 8 28 33 50 www.fibersystem.se
S-168 66 Bromma, Sweden VAT SE556606432501
