Centrifugal pump data sheet — PAGE 3 OF

Single-stage overhung (type OH) — JOB NO. ITEM NO.(S)

US customary units REQ. / SPEC NO. /
PURCH. ORDER NO. DATE

ENQUIRY NO. BY

1 CONSTRUCTION SURFACE PREPARATION AND PAINT

2 ROTATION: (VIEWED FROM COUPLING END) CW CCW MANUFACTURER'S STANDARD OTHER (SEE BELOW)
3 PUMP TYPE: (4.1) SPECIFICATION NO.
4 OH2 OH3 OH6 OTHER PUMP:
5 CASING MOUNTING: PRIMER
6 CENTRELINE IN-LINE OTHER FINISH COAT
7 BASEPLATE: (6.3.17)
8 CASING TYPE: PRIMER
9 SINGLE VOLUTE MULTIPLE VOLUTE DIFFUSER FINISH COAT
10 CASE PRESSURE RATING: DETAILS OF LIFTING DEVICES(6.3.20)
11 OH6 PUMP SUCTION REGION DESIGNED FOR MAWP (5.3.6) SHIPMENT: (7.4.1)
12 MAX ALLOWABLE WORKING PRESSURE (PSIG) DOMESTIC EXPORT EXPORT BOXING REQUIRED
13 @ (°F) OUTDOOR STORAGE MORE THAN 6 MONTHS
14 HYDROTEST PRESSURE (PSIG) SPARE ROTOR ASSEMBLY PACKAGED FOR:
15 NOZZLE CONNECTIONS: (5.4.2) HORIZONTAL STORAGE VERTICAL STORAGE
16 SIZE (IN) FLANGE FACING POSITION TYPE OF SHIPPING PREPARATION
17 RATING (LBS)
18 SUCTION HEATING AND COOLING
19 DISCHARGE HEATING JACKET REQ'D. (5.8.9)
20 COOLING REQ'D.
21 PRESSURE CASING AUX. CONNECTIONS: (5.4.3) COOLING WATER (C.W.) PIPING PLAN (6.5.3.1)
22 NO. SIZE (NPS) TYPE C.W. PIPING:
23 DRAIN PIPE TUBING FITTINGS
24 VENT C.W. PIPING MATERIALS:
25 WARM-UP S. STEEL C. STEEL GALVANIZED
26 COOLING WATER REQUIREMENTS:
27 MACHINED AND STUDDED CONNECTIONS (5.4.3.8) BEARING HOUSING (GPM)
28 CYLINDRICAL THREADS REQUIRED (5.4.3.3) HEAT EXCHANGER (GPM)
29 ROTOR: TOTAL COOLING WATER (GPM)
30 COMPONENT BALANCE TO ISO 1940 G1.0 (5.9.4.4) HEAT MEDIUM: STEAM OTHER
31 COUPLINGS: (6.2.2) HEATING PIPING: TUBING PIPE
32 MANUFACTURER MODEL BEARINGS AND LUBRICATION
33 RATING (HP/100 r/min) BEARING (TYPE/NUMBER) (5.10.1):
34 SPACER LENGTH (IN) SERVICE FACT RADIAL /
35 COUPLING BALANCED TO ISO 1940-1 G6.3 (6.2.3) THRUST /
36 COUPLING WITH PROPRIETARY CLAMPING DEVICE (6.2.11) LUBRICATION (5.11.3, 5.11.4):
37 COUPLING PER ISO 14691 (6.2.4) GREASE OIL
38 COUPLING PER ISO 10441 (6.2.4) PURGE OIL MIST PURE OIL MIST
39 COUPLING PER API 671 (6.2.4) ASME B15.1 CONSTANT LEVEL OILER PREFERENCE (5.10.2.2):
40 NON-SPARK COUPLING GUARD (6.2.14c) OIL VISC. ISO GRADE
41 COUPLING GUARD STANDARD PER (6.2.14a) INSTRUMENTATION
42 BASEPLATES: ACCELEROMETER (6.4.2.1)
43 API BASEPLATE NUMBER (ANNEX D) PROVISION FOR MOUNTING ONLY (5.10.2.11)
44 NON-GROUT CONSTRUCTION (6.3.13) FLAT SURFACE REQ'D (5.10.2.12)
45 OTHER TEMP. GAUGES (WITH THERMOWELLS) (8.1.3.6)
46 MECHANICAL SEAL: (5.8.1) PRESSURE GAUGE TYPE
47 SEE ATTACHED ISO 21049/API 682 DATA SHEET
48
49 REMARKS:

50 WEIGHTS (LBS)
51 PUMP
52 BASEPLATE
53 DRIVER
54 TOTAL