0% found this document useful (0 votes)

30 views76 pages

NA1 Air Circuit Breaker Catalog

CHINT is a global smart energy solution provider with a presence in over 140 countries and a workforce of more than 30,000 employees. The company focuses on clean energy, energy distribution, and intelligent manufacturing, utilizing its One Cloud & Two Nets strategy to integrate modern energy and digital technology. Founded in 1984, CHINT has achieved annual sales of 10.5 billion USD and ranks among the top 50 Asian listed companies.

Uploaded by

hossenripon771

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

30 views76 pages

NA1 Air Circuit Breaker Catalog

Uploaded by

hossenripon771

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 76

CHINT No EN B94

Europe
Italy West Asia & Africa
CHINT Italia Investment S.r.l.
U.A.E
Add: Via A. Pacinotti 28, 30033 Noale (VE)
Tel: +39 041 446614 CHINT MIDDLE EAST AND AFRICA DMCC
Fax: +39 041 5845900 E-mail: [email protected] Add: Unit No: 2101, Jumeirah business center 1 , Jumeirah Lakes Towers ,
Dubai UAE
Czech Republic Tel: +97145571532
P.O BOX :337555
NOARK Electric Europe s.r.o. Email: [email protected]
Add: Sezemická 2757/2, 193 00 Prague 9
Tel: +420 226 203 120 Email: [email protected] Egypt
CHINT Electrics (Egypt) Co., Ltd.
Turkey
Chint Turca Elektrik Sanayi VE Ticaret Anonim Sirketi Add: Chint office, Smart village, October 6th,Giza, Egypt
Tel: +20 1097173769
Add: Zumrutevler Mahallesi Ural Sokak No. 22/18 NAS PLAZA B Block P.O BOX : 00202
KAT 1, Maltepe, Istanbul Email: [email protected]
Tel: +90216 621 00 55 Fax:+90216 621 00 50
E-mail: [email protected]

Spain Latin America

CHINT Electrics S.L.
Brazil
Add: Calle José Echegaray, Num 8.Parque Empresarial Las Rozas
Edificio 3, Planta Baja, Oficina 7-8.C.P: 28232 Las Rozas (Madrid) CHINT Electrics South America Ltd
Tel: 0034 91 636 59 98 Fax: 0034 91 645 95 82 Add: Av. Paulista, 1765 - Edifício Scarpa-Conj.22
E-mail: [email protected] Bela Vista –CEP 01311-200-São Paulo- SP
Tel: 0055-11-3266-7654
Russia E-mail: [email protected], [email protected]
ООО “Чинт Электрик”
Peru
Юридический адрес: 109544, г. Москва, б-р Энтузиастов, д. 2,
этаж 19, ком. 71; 72 CHINT LATAM(PERU) S.A.C.
Фактический адрес: РФ, 109544, г. Москва, б-р Энтузиастов, д. 2
Add.: Camino Real 348 oficina 603, San Isidro, Lima
Тел: +7 (495) 540-61-41
Tel: +51 1 763 4917
Тел: +7 (800) 222-61-41
Email: [email protected]; [email protected]
E-mail: [email protected]

North America Asia Pacific

United States China
NOARK Electric (USA) Inc. Zhejiang CHINT Electrics Co., Ltd.
Add: 2188 Pomona Blvd., Pomona, CA 91767 Add (Shanghai)：Bldg.2, No.3255 Sixian Road, Songjiang 201614 P.R.China
Tel: 626-330-7007 Fax: 626-330-8035 Tel: 0086-21-67777706 Fax: 0086-21-67777777-88225
E-mail: [email protected] E-mail: [email protected]

Mexico India
CHINT SOLAR MEXICO S DE RL DE CV CHINT India Energy Solution Private limited
Add: Av. Paseo de la Reforma 296, Piso 37, Oficina 123 Discovery Tower Plot No. A-17 Ground Floor Industrial Area
Juárez, Ciudad de México, 06600 Sector: – 62 Noida -201301
Tel: +52 1-55-8881-6127 India Hotline: - 18002707977
E-mail: [email protected] Company: - +91 1202975057

Zhejiang Chint Electrics Co., Ltd.

Add: No. 1, CHINT Road, CHINT Industrial Zone, North Baixiang,
Yueqing, Zhejiang, 325603, P.R.China
Tel: 4001177797
Fax: +86-577-62775769 62871811
E-mail: [email protected]
Website: http://en.chint.com/ 2020

CHINT Electric All Rights Reserved Recycle Paper Printed

Specifications and technical data are subject to change without notice.
Please contact us to confirm relevant information on ordering
NA1 Air Circuit Breaker
ABOUT CHINT ONE CLOUD & TWO NETS STRATEGY

Business Model Innovation Solution Innovation

Solutions and Services for Customers Optimization for Manufacturing and Supply Chain

Intelligent Power Intelligent Product Factory Operation Intelligent

Energy Storage Automation Building Design and Service and Maintenance Manufacturing
System Solution Solution System Service System Solution

Intelligent Distributed Campus Process Industrial Smart

Photovoltaic System Microgrid Energy Efficiency Automation Automation Water
Solution Solution Solution Solution Solution Solution

CHINT is a world renowned smart energy solution provider.

Chint Energy Internet of Things Chint Industrial Internet of Things
To comply with the trend of integrated development of modern energy, intelligent manufacturing ( EIoT) ( IIoT )
and digital technology, CHINT has adopted the One Cloud & Two Nets as business strategy. As the
platform of intelligent technology and data application, CHINT Cloud fulfills digital application and Chint Industrial Internet PaaS Platform
services in both internal and external. Based on the Industrial Internet of Things (IIoT), CHINT built
an intelligent manufacturing system and realizes intelligent application in electrical industry. Relying
on the Energy Internet of Things (EIoT), CHINT built its smart energy system and develops the
regional EIoT mode.

Focusing on energy system of supply, storage, transmission, distribution and consumption, CHINT
has core businesses of clean energy, energy distribution, big data and energy value-added services. CHINT CLOUD CHINT EIoT CHINT IIoT
Furthermore, CHINT pillar businesses include photovoltaic equipment, energy storage, power
transmission & distribution, low-voltage apparatuses, intelligent terminals, software development Being the carrier of smart technology and Being a user-centric multi-energy comple- Being a smar t manufacturing system
and control automation. With developing into a platform enterprise, CHINT provides a package of data applications, CHINT Cloud connects mentary smart energy system, CHINT EIoT based on corporate digital transforma-
corporate in-house manufacturing with provides a package of energy solutions tion, CHINT IIoT constitutes a flexible,
energy solutions for public institutions, industrial & commercial users and end users, by building a operation and management data, realizing for governments, industrial & commercial high-efficiency and intelligent industrial
regional smart energy operation ecosphere. digital applications and services internally users and end users system.
and externally.
Founded in 1984, CHINT has developed business network in over 140 countries and regions with
more than 30,000 employees. CHINT has reached annual sales of 10.5 billion USD, ranking Top 50
Asian Listed Companies and Top 100 China Private Enterprises.
ABOUT CHINT ONE CLOUD & TWO NETS STRATEGY

Business Model Innovation Solution Innovation

Solutions and Services for Customers Optimization for Manufacturing and Supply Chain

Intelligent Power Intelligent Product Factory Operation Intelligent

Energy Storage Automation Building Design and Service and Maintenance Manufacturing
System Solution Solution System Service System Solution

Intelligent Distributed Campus Process Industrial Smart

Photovoltaic System Microgrid Energy Efficiency Automation Automation Water
Solution Solution Solution Solution Solution Solution

CHINT is a world renowned smart energy solution provider.

3 global R&D centers : 20 overseas subsidiaries Comprehensive Strength Quality Management

Europe、North America、Asia Pacific
16 marketing offices in China 2015, top 100 enterprises in China machinery industry 2016, advanced unit and user-satisfied enterprise in national
6 worldwide marketing areas : 2016, top 100 enterprises of Zhejiang Province user satisfaction project
Asia Pacific、Western Asia and Africa、Europe、Latin America、 32 international logistics centers 2017, ranking the 85th place among top 500 China private 2016, executive director unit of Asia Quality Function
North America、China enterprises Development Association
2017, innovative leading enterprise of Zhejiang Province 2017, quality good faith enterprise of China machinery industry
2300 sales companies
13 manufacturing bases : 2017, top 100 enterprises in innovation capacity among 2017, national product and service quality good faith
China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan, Jinan), the national hi-tech enterprises of Zhejiang Province demonstration enterprise
Thailand, Egypt, Singapore, Vietnam, Malaysia, Algeria (production line)

Independent Innovation Social Responsibilities

2015, Science and Technology Award of China 2014, five-star enterprise of China industry sector in performing
Electrotechnical Society social responsibilities
2016, Golden Patent Prize of Zhejiang Province and Patent 2016, National Enterprise of Observing Contract and Valuing
Recognition Award of Zhejiang Province for two serial products Credit
Moscow Russia
Germany

2016, national intellectual property demonstration enterprise 2017, credit management demonstration enterprise of Zhejiang
Prague
Spain Venice
North America
Madrid
Europe
Turkey
US 2016, group member of China Intellectual Property Society Province
Los Angeles
Dubai Jiuquan
Xianyang 2016, member of Global Energy Interconnection Development 2018, the 10th “China Charity Award” of the Ministry of Civil
Jinan
Dubai Hangzhou Shanghai
Jiaxing
Mexico and Cooperation Organization Affairs
Wenzhou
Western Asia
and Africa India Thailand Asia Pacific
Vietnam

Xianyang
Singapore

Latin America

Peru
Brazil

Global R&D Centers

QUALIFICATION CERTIFICATION
Sao Paulo

International Marketing Areas

Manufacturing Bases
Logistics Centers

The products have been accredited through China

Compulsory Certification (CCC) as well as UL of US, CE of EU,

Heilongjiang Office
VDE and TÜV of Germany, EAC of Russia, KEMA of Nether-
lands, RCM of Australia, RCC of South Africa and other interna-
tional product certifications.
Xinjiang Office

Liaoning Office

Beijing
Beijing Office

Shandong Office Industry Headquarters

Logistics Centers
Henan Office Marketing Offices

North China Office

Jiangsu Office

Hubei Office Shanghai Office

Sichuan Office
Hangzhou

Zhejiang
Hunan Office Office Wenzhou
Taiwan
Island
Hong Kong
Macao Dongsha Islands

Hainan Island
Yunnan
Guangdong Office Xiasha Islands
Yongxing Island
Office Zhongsha Islands
Huangyan Island
Guangxi Office
S ea
h in a

ds
C

an
Is l
South

ha
ns
Na

James Shoal
Spratly Islands
RELIABLE QUALITY, BEST-SELLING WORLDWIDE CHINT HONORS

3 global R&D centers : 20 overseas subsidiaries Comprehensive Strength Quality Management

Independent Innovation Social Responsibilities

Xianyang
Singapore

Latin America

Peru
Brazil

Global R&D Centers

QUALIFICATION CERTIFICATION
Sao Paulo

International Marketing Areas

Manufacturing Bases
Logistics Centers

The products have been accredited through China

Compulsory Certification (CCC) as well as UL of US, CE of EU,

Heilongjiang Office
VDE and TÜV of Germany, EAC of Russia, KEMA of Nether-
lands, RCM of Australia, RCC of South Africa and other interna-
tional product certifications.
Xinjiang Office

Liaoning Office

Beijing
Beijing Office

Shandong Office Industry Headquarters

Logistics Centers
Henan Office Marketing Offices

North China Office

Jiangsu Office

Hubei Office Shanghai Office

Sichuan Office
Hangzhou

Zhejiang
Hunan Office Office Wenzhou
Taiwan
Island
Hong Kong
Macao Dongsha Islands

Hainan Island
Yunnan
Guangdong Office Xiasha Islands
Yongxing Island
Office Zhongsha Islands
Huangyan Island
Guangxi Office
S ea
h in a

ds
C

an
Is l
South

ha
ns
Na

James Shoal
Spratly Islands
CRAFTSMANSHIP FORGES HIGH-QUALITY CHINT KUNLUN SERIES
PRODUCTS
Craftsmanship Forges High-quality Products Air Circuit Breaker Moulded Case Terminal Distribution Motor Control
Circuit Breaker Apparatus and Protection
CHINT Electrics, a core controlled company belonging to CHINT 140 countries and regions, and has become one of world famous
Group, it focuses on R&D, design, manufacturing and sales of low-voltage apparatus brand operators. Built-in busbar temperature Fine shell-frame division ; Clear contact window ; Suitable for large voltage
low-voltage apparatus products and provides system solutions CHINT will continuously satisfy the increasing market demand sensor ; Line protection ; Small size and high current ; fluctuation ;
for building, power supply, hoisting, HVAC, telecommunication through technical and innovative services advancing with the Fine shell-frame division ; Double insulation ; More current specification Humane design ;
and other industrial customers. For over 30 years since its found- times, and will provide safer, more reliable products and create Man-machine Man-machine options ; Fine current specification ;
ing, CHINT has provided reliable products and services for over more secure and comfortable living environment. interconnection ; interconnection ; Abundant accessories ; More standard auxiliary contacts ;
Strong environmental Strong environmental Strong environmental Strong environmental
adaptability. adaptability. adaptability. adaptability.

The Next Reliable Choice

CRAFTSMANSHIP FORGES HIGH-QUALITY CHINT KUNLUN SERIES
PRODUCTS
Craftsmanship Forges High-quality Products Air Circuit Breaker Moulded Case Terminal Distribution Motor Control
Circuit Breaker Apparatus and Protection
CHINT Electrics, a core controlled company belonging to CHINT 140 countries and regions, and has become one of world famous
Group, it focuses on R&D, design, manufacturing and sales of low-voltage apparatus brand operators. Built-in busbar temperature Fine shell-frame division ; Clear contact window ; Suitable for large voltage
low-voltage apparatus products and provides system solutions CHINT will continuously satisfy the increasing market demand sensor ; Line protection ; Small size and high current ; fluctuation ;
for building, power supply, hoisting, HVAC, telecommunication through technical and innovative services advancing with the Fine shell-frame division ; Double insulation ; More current specification Humane design ;
and other industrial customers. For over 30 years since its found- times, and will provide safer, more reliable products and create Man-machine Man-machine options ; Fine current specification ;
ing, CHINT has provided reliable products and services for over more secure and comfortable living environment. interconnection ; interconnection ; Abundant accessories ; More standard auxiliary contacts ;
Strong environmental Strong environmental Strong environmental Strong environmental
adaptability. adaptability. adaptability. adaptability.

The Next Reliable Choice

NA1 Air Circuit Breaker
NA1

NA1

Page P-001
P-001 Air Circuit Breaker NA1

NA1-1000X
200A to 1000A

NA1-2000X,NA1-2000XN，NA1-2000XH
630A to 2000A

Summary
5 basic frame sizes
For your various requirements, the Air Circuit Breaker NA1
includes 5 basic frame sizes as followed.
NA1-3200X,NA1-3200XN,NA1-4000X
2000A to 4000A

NA1-6300X,NA1-6300XN
4000A to 6300A
NA1 Air Circuit Breaker P-002

1. General 2.6 Type designation

NA1 - □□-□□ / □-□-□-□-□
1.1 Application scope
NA1 series air circuit breaker is suitable for the circuit of AC Voltage of secondary circuit
50Hz/60Hz with rated service voltage 400V, 690V and rated AC220V, AC380V,
service current up to 6300A. It is mainly used to distribute AC230V, AC400V
electric energy and protect circuits and electric equipment DC220V, DC110V
against over-load, under-voltage, short-circuit and single-
Wiring of main circuit:
phase earthing fault.
H:Horizontal wiring of main circuit
With intelligentized and selective protection functions, the V:Vertical wiring of main circuit
breaker can improve the reliability of power supply, and avoid
Mode of installation:
unnecessary power failure. The breaker is applicable for
F:Fixed type
power stations, factories, mines (for 690V) and modern high-
D:Draweout type
buildings, especially for the distribution system of
intelligentized building.
Mode of operation:
1.2 Standard: IEC/EN 60947-2. M:Manual
P: Power-driven
2. Operating conditions No. of poles:
2.1 Temperature condition: 3:3-pole

-5℃~40℃; the average value within 24h shall not exceed 4:4-pole

+35℃ (special situation excluded); Intelligent controller:

2.2 Altitude:≤2000m; M: Standard type

3M: Multifunctional type
2.3 Pollution grade: Grade 3; 3H: Communication type

2.4 Air conditions: Rated current:

At mounting site, relative humidity not exceed 50% at the
max temperature of +40℃, higher relative humidity is
Frame size
allowable under lower temperature, RH could be 90% at Rated current
rated current
+20℃, special measures should be taken to occurrence of
200A
dews;
400A
2.5 Note: Without the intelligent controller, the breaker 1000A 630A
functions as a switch-disconnector. 800A

1000A
630A

800A

1000A
2000A
1250A

1600A

2000A

3200A 2500A

3200A

4000A 4000A

4000A

6300A 5000A

6300A

Breaking capacity:
X
XN
XH
Frame size rated current:
1000,2000,3200,4000,6300
Design sequence number

ACB

Company code
P-003 Air Circuit Breaker NA1

11
7

12 8

15
3

5
NA1 Air Circuit Breaker P-004

NA1 Air Circuit Breaker

1 Drawout type

2 Fixed type

3 Intelligent controller

4 Operating mechanism

5 Auxiliary contact

9
6 Locking-device

10 7 Arcing chamber

8 Secondary wiring terminal

9 Wire-cable mechanical interlock

10 Connecting-rod type mechanical interlock

11 Shunt release

12 Closing electromagnet

13 Under-voltage release

14 Motor-driven energy-storage mechanism

15 Rotary handle

16 Mounting plate

2
16
6
P-005 Air Circuit Breaker NA1

3. Structure

+ =

Drawer seat Body

Drawout type breaker/switch-disconnector

Mounting plate Mounting plate for the Mounting plate

fixed type breaker/switch-disconnector

Secondary wiring terminal

Fault-breaking indicator
reset button Making button Under-voltage release

Energy storage &

Breaking button Shunt release
release indicator

Breaking/making Closing electromagnet

indicator Name plate

Auxiliary contact

Motor-driven energy
Structure for in storage mechanism
and out Locking device
Rotary handle

Rotate out
Rotate in Intelligent controller
NA1 Air Circuit Breaker P-006

4. Main technical parameter

Type NA1-1000X

AC400V 42
Rated ultimate short circuit breaking capacity (Icu)
AC690V 25
AC400V 30
Rated service short circuit breaking capacity (Ics)
AC690V 20
AC400V 30
Rated short-time withstand current (Icw.1s)
AC690V 20
Rated current In (A) 200 400 630 800 1000
Number of poles 3, 4
Rated voltage Ue (V) AC 400, AC 690
Rated insulation voltage Ui (V) 800
Rated current of N-pole In (A) 100%In
Fixed disconnection time (ms) 23~32

Intelligent Standard type (M)

controller Communication type (H)

Electric life AC 400V:6500, AC 690V:3000

Operation
Non-maintenance 15,000
performance Mechanical life
Maintenance 30,000
Connection pattern Horizontal, Vertical
Motor operational Drawout 3P/4P 38/55
standard configuration
weight (kg) Fixed 3P/4P 22/26.5
P-007 Air Circuit Breaker NA1

Type NA1-2000X NA1-2000XN NA1-2000XH

AC400V 80 50 65
Rated ultimate short circuit breaking capacity (Icu) AC415V 50 40 50
AC690V 50 40 50
AC400V 65 50 65
Rated service short circuit breaking capacity (Ics) AC415V 40 40 40
AC690V 40 40 40
AC400V 50 50 50
Rated short-time withstand (Icw.1s) AC415V 40 40 40
AC690V 40 40 40
AC400V 42 42 42
Rated short-time withstand (Icw.3s)
AC415V 42 42 42
Rated current In (A) 630 800 1000 1250 1600 2000
Number of poles 3, 4
Rated voltage Ue (V) AC400, AC415, AC690
Rated insulation voltage Ui (V) 1000
Rated current of N-pole In (A) 100%In
Fixed disconnection time (ms) 23~32

Intelligent Standard type (M)

controller Communication type (H)

Electric life AC400:6500 AC690V:3000

Operation
Non-maintenance 15,000
performance
Mechanical life
Maintenance 30,000
Connection pattern Horizontal, Vertical

Motor operational Drawout 3P/4P 67.5 / 80 70 / 84 79 / 90.5

standard configuration
weight (kg) Fixed 3P/4P 42 / 52 44 / 52 45 / 54
NA1 Air Circuit Breaker P-008

Type NA1-3200X NA1-3200XN NA1-4000X

AC400V 80 65 80
Rated ultimate short circuit breaking capacity (Icu) AC415V 65 50 —

AC690V 65 50 65
AC400V 65 65 65
Rated service short circuit breaking capacity (Ics) AC415V 65 50 —

AC690V 65 50 65
AC400V 65 65 65
Rated short-time withstand (Icw.1s) AC415V 50 50 —

AC690V 50 50 50
AC400V 45 45 —
Rated short-time withstand (Icw.3s)
AC415V 45 45 —

Rated current In (A) 2000 2500 3200 4000

Number of poles 3, 4 3
Rated voltage Ue (V) AC400, AC415, AC690
Rated insulation voltage Ui (V) 1000
Rated current of N-pole In (A) 100%In
Fixed disconnection time (ms) 23~32

Intelligent Standard type (M)

controller Communication type (H)

Electric life AC400V:3000 AC690V:2000 AC400V:1500 AC690V:1000

Operation
performance Non-maintenance 10,000
Mechanical life
Maintenance 20,000
Connection pattern Horizontal, Vertical

Motor operational Drawout 3P/4P 90.5 / 116 90.5 / 116 103 / 130 132
standard configuration
weight (kg) Fixed 3P/4P 55 / 68 55 / 68 56.5 / 71 72 / -
P-009 Air Circuit Breaker NA1

Type NA1-6300X NA1-6300XN

AC400V 120 100

Rated ultimate short circuit breaking capacity (Icu) AC415V 85 75
AC690V 85 75
AC400V 100 100
Rated service short circuit breaking capacity (Ics) AC415V 75 75
AC690V 75 75
AC400V 100 100
Rated short-time withstand (Icw.1s) AC415V 75 75
AC690V 75 75
AC400V 50 50
Rated short-time withstand (Icw.3s)
AC415V 50 50
rated current In (A) 4000 5000 6300
Number of poles 3, 4 3
Rated voltage Ue (V) AC400, AC415,AC690
Rated insulation voltage Ui (V) 1000
Rated current of N-pole In (A) 50%In —

Fixed disconnection time (ms) 23~32

Intelligent Standard type (M)

controller Communication type (H)

Electric life AC400V:1500 AC690V:1000

Operation
performance Non-maintenance 5000
Mechanical life
Maintenance 10,000
Connection pattern Horizontal, Vertical

Motor operational Drawout 3P/4P 210 / 233 210 / 233 233 / -

standard configuration
weight (kg) Fixed 3P/4P -/- -/- -/-

Standard configuration: M type intelligent controller; Under-voltage release; Shunt release; Motor-driven energy-storage mechanism; Closeing electromagnet.
NA1 Air Circuit Breaker P-010

5. Dimensions and connection

NA1-1000X Drawout-type

216 46 Boring dimension of doorcase

268
N 226

H
362

8×Φ4

101.5

316
304

358
Installation panel

3
91.5 16
Disconnected
L1 57 position Installation hole on right side
158 59 4
L
A 310 65
N 27 Connected position
70 70 70
12
200,400A n×Φ13
35
NA1-1000 L1 L
12

15
35 194 308
3P
18

n×Φ10.5 4P 264 378

630,800,
1000A In(A) A(mm) n(3P/4P) H(mm)
2×Φ9 200, 400 30.5 3/4 6
158

630 48 6/8 8
2-11.5×9
800, 1000 48 6/8 10

L1(3P)

L1(4P)

NA1-1000X Fixed-type

Boring dimension of doorcase

268
H

N 226
315

259
101.5

8×Φ4
312
270

Installation panel
46.5

216 15 A 9
N 230
3

70 70 70 Installation hole on right side

12
n×Φ13
200,400A 35

15
35 53
n×Φ10.5
12
18

630,800,
NA1-1000 L1 L In(A) A(mm) N(3P/4P) H(mm)
1000A
12

3P 246 274 200, 400 32 3/4 6

4P 316 344 630 50 6/8 8
144

4-9×13 800, 1000 50 6/8 10

L
P-011 Air Circuit Breaker NA1

NA1-2000X/NA1-2000XN/NA1-2000XH Drawout-type

45(Disconnected position)
448(4P) C
8×Φ13
C a 353(3P) 60
N pole 28
Right & outer side of
insulation panel

30.5
a

14
D
Right & outer side of
breaker
95 95 95 92.5 15
112

258
439
horizontal connection(Default Configuration)

42.5
37
92

C 16×Φ13
30 60

70
N pole

14
10 97 175
23

Right & outer side of

60
202.5 insulation panel
391

30
292
465
405(3P)
95 95 95 92.5
500(4P) horizontal connection Lengthen busbar
D
146.5

294
267

Φ11
370
360(4P)

265(3P)

N pole
2×11×17 115

40
Φ14
Installation panel 17
11xΦ4
32×Φ13 28
70

Right & outer 60 In A a mm

175 side of breaker
33 95 95 95 630 10
Right & outer side of breaker Opening hole on panel 800~1600 15
L type vertical connection
2000 20

NA1-2000X/NA1-2000XN/NA1-2000XH Drawout-type,vertical,rear connection,rotation busbar

45(Disconnected position) 448(4P)

353(3P)
C

4×Φ13
28

258
439
122.5

42.5
95.5

10
37

10 97 175 202.5
14
292
48 405(3P)
391
500(4P)
146.5

In A a mm
294
267

Φ11 630 10
370

800~1600 15
360(4P)

265(3P)

2000 20
2×11×17
Φ14
Installation panel C
11xΦ4
N pole a
70

Right & outer Right & outer side of

175 side of breaker insulation panel
33

Right & outer side of breaker Opening hole on panel

Right & outer side of
95 95 95 92.5 15 breaker
NA1 Air Circuit Breaker P-012

NA1-2000X/NA1-2000XN/NA1-2000XH Drawout-type, horizontal, rear connection,rotation busbar

448(4P)
45(Disconnected position) 353(3P)
C

258
439
122.5

42.5
95.5

70
202.5

10 97 175 292
405(3P)
391 500(4P)

In A a mm

630 10
146.5

800~1600 15
294
267

2000 20
Φ11
370
360(4P)

265(3P)

C
2×11×17 Right & outer side of
60 insulation panel
Φ14

14
11xΦ4 Installation panel N pole 28 8×Φ13

48
70

Right & outer

175 side of breaker

10
33 Right & outer side of
95 95 95 92.5 15 breaker
Right & outer side of breaker Opening hole on panel

NA1-2000X/NA1-2000XN/NA1-2000XH Fixed-type

413(4P)
Zero arcing covering 18min
C
ferreous material 318(3P)
8×Φ13
292 28 60
N pole
C
42

a
17

D
115

402

95 95 95 86
a
112

258

horizontal connection (Default Configuration)

C C
16×Φ13
55

N pole 30 60 8×Φ13
14

28 60
21

N pole
60

50 150 69.5
60

11 11
32

b
30
13

290 181

359 340(3P)
95 95 95 86 95 95 95 86
435(4P)
horizontal connection Lengthen busbar horizontal connection shortened busbar
D

172.5

In A a mm b mm
311.2

630 10 17
269

4×Φ12 N pole
115

300 800~1600 15 17
40

2000 20 18.5
17
28.5
150

Installation 32×Φ13 28
panel 60
8×Φ4
340(3P) 95 95 95
Installation hole 2 Installation hole
on Right & outer side 345 on Right & outer side
435(4P)
of breaker of breaker L type vertical connection
Opening hole on panel
P-013 Air Circuit Breaker NA1

NA1-3200x/NA1-3200xN Drawout-type

C
16×Φ13
100

25
528(4P) N Pole 50 Right & outer side of
45(Disconnected position) insulation panel

100
413(3P)
C
a

50
Right & outer side of
breaker
120 125 125 92.5 15
a

258
horizontal connection(Default Configuration)

439
D
112

42.5
C

37
100
92

16×Φ13

70
75 25

14
Right & outer side of
232.5 insulation panel
23

10 97 175

30.5
352
391
465(3P)
536
Right & outer side of
580(4P) breaker
115 125 125 92.5 15

horizontal connection shorten busbar

D
155.5

362
303
273

Φ11
379
440(4P)

325(3P)

2×11×17 In A a mm
48

N Pole
Φ14
115
2000~2500 20

40
202.5
17
3200 30
70

11×Φ4
20

Installation panel
175 232.5
33 40
Right & outer 32×Φ13
Right & outer side of breaker 405 100
side of breaker
120 125 125
Opening hole on panel
L type vertical connection

NA1-3200X/NA1-3200XN Drawout-type,vertical,rear connection,rotation busbar

528(4P)
45(Disconnected position)
413(3P)
C

8×Φ13
50

258

439
126

42.5
100

100

70
37

10 97 175 20 232.5
40 352
465(3P)
94
391 580(4P)

In A a mm
2000~2500 20
3200 30
155.5

362
303
273

Φ11 N pole C
379
440(4P)

a
325(3P)

2×11×17
104
48

Right & outer side of

Φ14 insulation panel

202.5
70

11×Φ4
20

Installation panel
175 232.5 Right & outer side of
33 breaker
Right & outer 115 115 115 102.5 15
Right & outer side of breaker 405 side of breaker

Opening hole on panel

NA1 Air Circuit Breaker P-014

NA1-3200x/NA1-3200xN Drawout-type, horizontal, rear connection,rotation busbar

528(4P)
45(Disconnected position)
413(3P)
C

258

439
112

42.5
107.5

70
37
10 97 175
232.5
352
391 465(3P)
580(4P)

In A a mm
155.5

2000~2500 20
362
3200 30
303
273

Φ11
379
440(4P)

325(3P)

2×11×17 C
48

Φ14
20

20
100

40
N pole 50 Right & outer side of
11×Φ4 202.5
insulation panel
70

Installation panel 94

104
175 232.5
33 Right & outer
405 side of breaker
Right & outer side of breaker Right & outer side of
16×Φ13
breaker
Opening hole on panel 115 125 125 92.5 15

NA1-3200x/NA1-3200xN Fixed-type

Zero arcing covering 493(4P) C

ferreous material 18min
378(3P) 16×Φ13
86
15

352 N pole 40
C
72

a
40

D
115

115 115 115 96

402
a

horizontal connection(Default Configuration)

112

258

C 12×Φ13
86
55

18.5

N pole 50
21

32
60

50 150 69.5
11 11
13

290 211 115 115 115 96

389 400(3P)
horizontal connection shorten busbar
515(4P)
D

N pole In A a mm
115

2000~2500 20
40
311
269

4×Φ12 3200 30
15

362
32×Φ13 40
28.5

86
150

115 115 115

8×Φ4 2 Installation panel
202.5
400(3P) Installation hole on L type vertical connection
Installation hole
Right & outer side of breaker 405 on Right & outer
515(4P)
Opening hole on panel side of breaker
P-015 Air Circuit Breaker NA1

NA1-4000X Fixed-type (3P)

Zero arcing covering 493

ferreous material

C
C

120 12×Φ13
134

15
30 40

134
402

258

40
112

189.5 189.5 79

21
Base point 4×Φ12 Horizontal
55

11 11
150 69.5

13
211
290 515

4×Φ12

311
269

362
150

28.5

8×Φ4 202.5 2 Installation panel

515 Installation hole on 405 Installation hole on
Right & outer side of breaker Right & outer side of breaker

Opening hole on panel

NA1-4000X Drawout-type (3P)

45(Disconnected position)

528
C
30

258
439
112

42.5
92

70
37

10 97 175
232.5
391 352
580

C
155.5

Φ11 362
303

Right & outer side of

273

40
103

insulation panel
379
440

12×Φ13
2×11×17
48

Φ14 50

140
11×Φ4 202.5 Right & outer side of
20

Installation panel
70

breaker
175 232.5 197.5 197.5 77.5 15
33 Right & outer
405 side of breaker
Right & outer side of breaker

Opening hole on panel

NA1 Air Circuit Breaker P-016

NA1-6300X/NA1-6300XN (In=4000A,5000A) Drawout-type

45(Disconnected position) 903(4P)

798(3P)

258

439
42.5
112

70
92

232.5

10 97 175 352

843(3P)
391

958(4P)

Right & outer side of

155.5

insulation panel
362
303
273

N Pole C
379

Φ11 100 155 210

818(4P)

20
28×Φ15
703(3P)

103
40
48

2×11×17
Φ14

11×Φ4 202.5 55 Right & outer side of

Installation panel
breaker
70

232.5 182.5 246.5 246.5 164 15

175 Right & outer
33
405 side of breaker
Right & outer side of breaker

Opening hole on panel

P-017 Air Circuit Breaker NA1

NA1-6300X/NA1-6300XN (In=6300A) Drawout-type (3P)

45(Disconnected position)

903
C

258

439
112

42.5
37
92

70
10 97 175
232.5

391 352

958

C
155.5

Φ11 362
180 260

20
303
273

Right & outer side of

379

103

insulation panel
40
818

2×11×17 Right & outer side of

24×Φ15 80
Φ14 breaker
316.5 323.5 140 15
11×Φ4 202.5
20

Installation panel
70

175 232.5
33 Right & outer
405 side of breaker
Right & outer side of breaker

Opening hole on panel

NA1 Air Circuit Breaker P-018

6. Secondary circuit wiring

6.1 NA1-1000X
Standard type, type (M/3M)

Emergency Motor-driven Motor-driven Motor-driven

Main circuit Intelligent controller Auxiliary contact Auxiliary contact
break break make energy-storage

SB1 SB2 SB3

HL1 HL2 HL3

3 5 7 9 19 21 23 25 27 29 31 33 35 37 39 XT

Intelligent Q F X M
controller
Power of
DF1 DF2 DF3 control circuit

DF4

1 2 4 6 8 18 20 22 24 26 28 30 32 34 36 38 40 XT

HL1: Failure indicator 8#,9#: Making indicator (capacity AC400V,1A)

HL2: Close indicator 27#,28#: Under-voltage release(Connected to the main circuit)
HL3: Energy storage indicator 29#,30#: Shunt release
SB1: Under-voltage button 31#,32#: Closing electromagnet
SB2: Shunt button 33#,34#,35#: Energy storage motor
SB3: Close button 18#~26#, 38#~40#: Auxiliary contact
Q: Under-voltage release (auxiliary contact capacity: AC230V,5A)
F: Shunt release
X: Close electromagnet
M: Energy storage motor
DF1-DF4: Auxiliary switch
1#, 2#: Auxiliary power input
3#,4#,5#: Fault trip contact output(4# common terminal,
contact capacity AC230V,5A
6#,7#: To be connected with current transformer(selective)

Note:
Dashed is to be connected by users.
P-019 Air Circuit Breaker NA1

Communication type, type (H/3H)

Emergenay Motor-driven Motor-driven

Main circuit Intelligent controller break break make Auxiliary switch

L1
FU
N
PE

Profibus-DP ~ ~
AC 220V PSU-1
HL3
ST-DP DC 24V
Device + -

Fault indicator + - DI0 DI1DI2DI3 DI4

DC24V
Green SB1 SB2 SB3
RU-1
D01 D02 D03 D04
HL1 HL2
▲
Red
3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 XT

Intelligent Q F X M
controller

DF1 DF2 DF3

1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 XT

HL1: Failure indicator

8#,9#: Making indicator(capacity AC400V,1A)
HL2: Close indicator
10#, 11#: communication output
HL3: Energy storage indicator
12#, 13#: Signal alarm of load 1 output
SB1: Under-voltage button
14#, 15#: Signal alarm of load 2 output
SB2: Shunt button
16#, 17#: Making signal output
SB3: Close button
18#, 19#: Closing signal output
Q: Under-voltage release
20#: Communication shield ground line
F: Shunt release
21#~24#: Voltage signal input of phase N,A,B,C
X: Close electromagnet
(With voltage measurement);
M: Energy storage motor
21#~23# is a set of auxiliary switches
DF1-DF3: Auxiliary switch
# #
(Without voltage measurement)
1 , 2 : Auxiliary power input(DC24)
# # # #
22# common terminal,contact capacity AC230V,5A
3 ,4 ,5 : Fault trip contact output(4 common terminal,
25#, 26#: Auxiliary contact (capacity:AC230V,5A)
contact capacity AC230V,5A
27#,28#: Under-voltage release(Connected to the main circuit)
6#, 7#: To be connected with current transformer(N/O auxiliary
29#,30#: Shunt release
contact, capacity AC400V, 1A,when no current transformer)
31#,32#: Closing electromagnet
33#,34#,35#: Energy storage motor
Note:
36#~40#: Auxiliary contact (capacity:AC230V,5A)
Dashed is to be connected by users.
NA1 Air Circuit Breaker P-020

Six pairs change-over contacts standard type (M/3M)

Main Auxiliary Emergency Motor-driven Motor-driven Motor-driven

Intelligent controller Auxiliary contact
circuit contact break break make energy-storage

SB1 SB2 SB3

HL1 HL2 HL3

3 5 7 9 14 15 17 19 21 23 25 27 29 31 33 35 37 39 XT

Q F X M
Intelligent Power of
controller control circuit
DF5 DF6 DF1 DF2 DF3
DF4

1 2 4 6 8 10 11 12 13 16 18 20 22 24 26 28 30 32 34 36 38 40 XT

HL1: Failure indicator 8#,9#: Making indicator (capacity AC400V,1A)

HL2: Close indicator 12#~26#: Auxiliary contact(auxiliary
HL3: Energy storage indicator contact capacity: AC230V,1A)
SB1: Under-voltage button 27#,28#: Under-voltage release(Connected to the main circuit)
SB2: Shunt button 29#,30#: Shunt release
SB3: Close button 31#,32#: Closing release
Q: Under-voltage release 33#,34#:Energy storage indicator
F: Shunt release 34#,35#: Energy storage motor
X: Close release 38#~40#: Auxiliary contact(auxiliary
M: Energy storage motor contact capacity: AC230V,1A)
DF1-DF6: Auxiliary switch
1#, 2#: Auxiliary power input
3#,4#,5#: Fault trip contact output(4# common
terminal,contact capacity AC230V,5A
6#, 7#: to be connected with current
transformer(selective)

Note:
Six pairs change-over contacts , without any additional function.
Dashed is to be connected by users.
P-021 Air Circuit Breaker NA1

6.2 NA1-2000X~6300X

The secondary circuit wiring for NA1-2000X~6300X with standard type (M) intelligent controller and instantaneous under-voltage release

Emergency
Main circuit Over-current release Motor-driven Motor-driven Auxiliary contact
break break make

SB2

Failure Energy storage

SB1 SB3

3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 36 38 40 42 44 46 48 50

FU
Q F X M

AX
Power
SA

Processing
unit
Intelligent Controller

1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 37 39 41 43 45 47 49 51

Open Close

_ 110V
~
_ 220V
~ Intelligent release power ("1" connect positive pole, and "2" connect negative pole for direct current)
~380V

SB1: Shunt button

SB2: Under-voltage button
SB3: Making button
Q: Under-voltage release
F: Shunt release
The auxiliary contact modes for customer use
X: Closing electromagnet
Ⅰ Four pairs change-over contacts Ⅱ Five pairs change-over contacts
M: Energy storage motor
XT: Connection terminal
36 38 40 42 44 46 36 38 40 42 44 46 48 50
SA: Position switch
Note: If control voltage of Q, F, X is different from each other,
they can be connected to different power.
# #
1 ,2 : Auxiliary power input
3#,4#,5#: Fault trip contact output(4# common terminal)
6#,7#,8#,9#: Auxiliary contact, normal open,
37 39 41 43 45 47 37 39 41 43 45 47 49
10#~24#: empty
# #
25 ,26 : to be connected with current transformer(selective)
27 ,28 : Under-voltage release(Connected to the main circuit)
# #

# #
29 ,30 : Shunt release
31#,32#: Closing release
33#,34#: Energy storage indicator
34#,35#: Energy storage motor
36#,51#: Auxiliary contact

Circuit explanation for signal output:

a. Broken-line parts shall be provided by customers.
b. Terminals 6#,7# can output NC (normal close) contact if that is required by users.
c. Terminal 35# can be directly connected to power (automatic pre-storing energy),
alternatively connect power after connecting NO button (manual-controlled
pre-storing energy).
d. Terminals 21#~24# is only for wiring with function meter display.
(excluding the special wiring)
NA1 Air Circuit Breaker P-022

The secondary circuit wiring for NA1-2000X~6300X with type (3M) intelligent controller and instantaneous under-voltage release

L1 1 2
N
PE

Highest-voltage of AC400V
to the incoming-line side
PE Un U1 U2 U3 SB2 SB1 SB3

Transformer
connected

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

Q F X SA
AX
M

1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51
Energy-
Fault OpenClose
storage

Main Shunt Closing Energy- Energy-

circuit
Intelligent controller Undervoltage storage storage Auxiliary switch
release electromagnet indication motor
release

The auxiliary contact modes for customer use SB1: Shunt button
SB2: Under-voltage button
ⅠFour pairs change-over contacts Ⅱ Five pairs change-over contacts
SB3: Making button
36 38 40 42 44 46 36 38 40 42 44 46 48 50 Q: Under-voltage release
F: Shunt release
X: Closing release
M: Energy storage motor
XT: connection terminal
SA: Position switch
1#, 2#: Intelligent controller power input
37 39 41 43 45 47 37 39 41 43 45 47 49
Note: When the power supply of the intelligent controller
is AC power, the 1#~2# connects to the AC power directly.
When the power supply is DC power, forbid connecting the
1#~2# to the DC power directly. Add a DC power supply
module, then the DC power connect to the input terminal
of the DC power supply module, and the 1#~2# connect to
3#,4#,5#: Fault trip contact output(4#common terminal) the output terminal of the DC power supply module,
6#,7#,8#,9#: Auxiliary contact(normal open) or else the intelligent controller will be damaged.
10#~11#: empty
12#~19#: The programmable output terminal. The normal products without these terminals,
but if the customer special ordered, the cost extra added.

3M type acquiescence output:

12#,13#: Signal alarm of load 1 output; 14 ,15 : Signal alarm of load2 output
# #

16#,17#: Self-diagnose alarm; 18#,19#: Fault trip; 20#: PE line; 21#~24#: Display the voltage of the signal input.
The normal products without these terminals,
if the customer special ordered the function meter, the cost extra added.
#
21 : N phase input terminal
# # #
22 ,23 ,24 : A, B, C three phase power input terminal (note the sequence)(highest-voltage of AC 400V)

# #
25 ,26 : Connect to the N phase current transformer or the input terminal of the current leakage transformer.
The normal products without these terminals, if the customer special ordered, the cost extra added.
27 ,28 : Under-voltage release(Connected to the main circuit); 29 ,30 : Shunt release; 31 ,32 : Closing release;
# # # # # #

# # # # # #
33 ,34 : Energy storage indicator; 34 ,35 : Energy storage motor; 36 ~51 : Auxiliary contact

Note:
a. Red colored part is to be connected by users
b. When the power system is three phase three wire, directly connect the Un to U2.
( If the voltage exceeds 400V, special explanation when ordered)
P-023 Air Circuit Breaker NA1

The secondary circuit wiring for NA1-2000X~6300X with type (3H) intelligent controller and instantaneous under-voltage release

1 2
L1
N
PE
To TO3 busbar
~ ~
AC 220V PSU-1
Profibus
24V
ST-DP NC DC 24V
GND + -
D+ D-

+ - DI0 DI1 DI2 DI3 DI4

Special connecting wire
Highest-voltage of AC400V DC24V

Modbus-RTU SB2 SB1 SB3 RU-1

D01 D02 D03 D04
Transformer
connected
D+ D-
Red Green
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

Q F X SA
AX

1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51

Fault Energy
storage Open Close

Main Closing Energy-

circuit Intelligent controller Undervoltage
Shunt
release electromagnet
Energy-
storage storage
Auxiliary switch
release indication
motor

The auxiliary contact modes for customer use SB1: Shunt button; SB2: Under-voltage button
SB3: Making button; Q: Under-voltage release
Ⅰ Four pairs change-over contacts Ⅱ Five pairs change-over contacts
F: Shunt release; X: Closing release
36 38 40 42 44 46 36 38 40 42 44 46 48 50 M: Energy storage motor; XT: connection terminal
SA: Position switch
1#, 2#: Intelligent controller power input
Note: When the power supply of the intelligent controller
is AC power, the 1#~2# connects to the AC power directly.
When the power supply is DC power, forbid connecting the
1#~2# to the DC power directly. Add a DC power supply
37 39 41 43 45 47 37 39 41 43 45 47 49
module, then the DC power connect to the input terminal
of the DC power supply module, and the 1#~2# connect to
# # # #
3 ,4 ,5 : Fault trip contact output(4 common terminal) the output terminal of the DC power supply module,
# # # #
6 ,7 ,8 ,9 : Auxiliary contact（normal open） or else the intelligent controller will be damaged.
# #
10 ~11 : communication output
# # # #
12 ,13 : Signal alarm of load 1 output; 14 ,15 : Signal alarm of load2 output
# # # #
16 ,17 :Breaking signal output; 18 ,19 :Making signal output
# #
20 : PE line; 21 : N phase input terminal
# # #
22 ,23 ,24 : A, B, C three phase power input terminal (note the sequence)(highest-voltage of AC 400V)

# #
25 26 : Connect to the N phase current transformer or the input terminal of the current leakage transformer.
The normal products without these terminals, if the customer special ordered, the cost extra added.
ST~DP: DP protocol module. There is no need for the ST-DP protocol module,
if the communication protocol is Modbus-RTV. But when the communication protocol is Profibus-DP,
the ST-DP protocol module is necessary, but the cost extra added.
ST power module IV: power converter (optional components)
ST201: Magnify the signal capacity of the controller. ( optional components) If the customer special ordered,
the cost extra added.
27 ,28 : Under-voltage release(Connected to the main circuit); 29 ,30 : Shunt release
# # # #

# # # #
31 ,32 : Closing release; 33 ,34 : Energy storage indicator
# # # #
34 ,35 : Energy storage motor; 36 ~51 : Auxiliary contact

Note:
a. Red colored part is to be connected by users
b. When the power system is three phase three wire, directly connect the Un to U2.
(If the voltage exceeds 400V, special explanation when ordered)
NA1 Air Circuit Breaker P-024

The secondary circuit wiring for NA1-2000X~6300X with standard type (M) intelligent controller and time-delay under-voltage release

Motor Motor
Main Emergency Motor driven Under-voltage
circuit Over-current release disconnection driven driven energy time-delay Auxiliary switch
break close storage release

Energy
SB2 SB1 SB3 storage

Failure Under-voltage
time-delay controller

3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 36 38 40 42 44 46 48 50

AX
Power

Processing
unit
Intelligent controller

1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 37 39 41 43 45 47 49 51

Open Close

~_ 110V
Intelligent release power("1” connect positive pole, and “2” connect negative pole for direct current)
~_ 220V
~380V

The auxiliary contact modes for customer use

Ⅰ Four pairs change-over contacts SB1: Shunt button SB2: Under-voltage button SB3: Making button
Q: Under-voltage time-delay release F: Shunt release
38 40 42 44 46 48 50
X: Closing electromagnet M: Energy storage motor
XT: Connection terminal SA: Position switch
Note: If control voltage of Q, F, X is different from each other,
they can be connected to different power.

39 41 43 45 47 49

1#,2#: Auxiliary power input

# # #
3 ,4 ,5 : Fault trip contact output(4# common terminal)
# # # #
6 ,7 ,8 ,9 : Auxiliary contact（normal open）
# #
10 ~24 : empty
25#,26#: to be connected with current transformer(selective)
27#,28#: Under-voltage release(Connected to the main circuit)
# #
29 ,30 : Shunt release
# #
31 ,32 : Closing release
# #
33 ,34 : Energy storage indicator
# #
34 ,35 : Energy storage motor
# #
36 ,37 : Under-voltage time delay release
# #
38 ~51 : Auxiliary contact

Circuit explanation for signal output:

a. Broken-line parts shall be provided by customers.
b. Terminals 6#,7# can output NC (normal close) contact if that is required by users.
c. Terminal 35# can be directly connected to power (automatic pre-storing energy),
alternatively connect power after connecting NO button (manual-controlled pre-storing energy).
d. The 21#~24# is only for wiring with function meter display. (Excluding the special wiring)
P-025 Air Circuit Breaker NA1

The secondary circuit wiring for NA1-2000X~6300X with type (3M) intelligent controller and time-delay under-voltage release

L1 1 2
N
PE

SB2 SB1 SB3

Highest-voltage of AC 400V
To the incoming-line side
PE Un U1 U2 U3

Transformer
Under-voltage
connected time-delay controller

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

F X SA Q
AX

1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51
Energy
Fault
storage Open Close

Main Energy- Energy-

Shunt Closing
circuit
Intelligent controller Emergency
release electromagnet
storage
indication
storage
Under-voltage
time-delay
release
Auxiliary switch
break motor

SB1: Shunt button; SB2: Under-voltage button

The auxiliary contact modes for customer use
SB3: Making button; Q: Under-voltage release
Ⅰ Four pairs change-over contacts
F: Shunt release; X: Closing release
38 40 42 44 46 48 50
M: Energy storage motor; XT: Connection terminal
SA: Position switch
1#, 2#: Intelligent controller power input
Note: When the power supply of the intelligent controller
is AC power, the 1#~2# connects to the AC power directly.
When the power supply is DC power, forbid connecting the
1#~2# to the DC power directly. Add a DC power supply
39 41 43 45 47 49
module, then the DC power connect to the input terminal
of the DC power supply module, and the 1#~2# connect to
the output terminal of the DC power supply module,
or else the intelligent controller will be damaged.

# # # # # # # #
3 ,4 ,5 : Fault trip contact output(4 common terminal); 6 ,7 ,8 ,9 : Auxiliary contact（normal open）
# # # #
10 ~11 : empty; 12 ~19 are the programmable output terminal. The normal products without these terminals,
but if the customer special ordered, the cost extra added.

3M type acquiescence output:

12#,13#: Signal alarm of load 1 output; 14#,15#: Signal alarm of load2 output
16#,17#: Self-diagnose alarm; 18#,19#: Fault trip
20#: PE line; 21#~24#: Display the voltage of the signal input. The normal products without these terminals,
if the customer special ordered the function meter, the cost extra added.
21#: N phase input terminal; 22#,23#,24#: A, B, C three phase power input terminal (note the sequence)(Highest-voltage of AC400V)

25#,26# Connect to the N phase current transformer or the input terminal of the current leakage transformer.
The normal products without these terminals, if the customer special ordered, the cost extra added.
27#,28#: Under-voltage release(Connected to the main circuit); 29#,30#: Shunt release
31#,32#: Closing release; 33#,34#: Energy storage indicator
34#,35#: Energy storage motor; 36#,37#: Under-voltage time delay release
38#~51#: Auxiliary contact

Note:
a. Red colored part is to be connected by users
b. When the power system is three phase three wire, directly connect the Un to U2. (If the voltage exceeds 400V,
special explanation when ordered)
NA1 Air Circuit Breaker P-026

The secondary circuit wiring for NA1-2000X~6300X with type (3H) intelligent controller and time-delay under-voltage release

1 2
L1
N
PE
To TO3 busbar
~ ~
AC 220V PSU-1
Profibus
24V DC 24V
+ -
ST-DP NC
GND
D+ D-
+ - DI0 DI1 DI2 DI3 DI4

SB2 SB1 SB3 DC24V

Special connecting wire RU-1
Highest-voltage of AC400V
D01 D02 D03 D04
To the inconnecting-line side
Modbus-RTV PE Un U1 U2 U3

Transformer
D+ D- Under-voltage
connected
Red Green time-delay controller

2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50

F X SA Q

1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51

Fault Energy
storage Open Close

Main Energy Energy

Shunt Closing Under-voltage
Intelligent controller Emergency release electromagnet
storage storage time-delay Auxiliary switch
circuit indication motor release
break

The auxiliary contact modes for customer use SB1: Shunt button; SB2: Under-voltage button
SB3: Making button; Q: Under-voltage release
Ⅰ Four pairs change-over contacts
F: Shunt release; X: Closing release
38 40 42 44 46 48 50 M: Energy storage motor; XT: Connection terminal
SA: Position switch
1#, 2#: Intelligent controller power input
Note: When the power supply of the intelligent controller
is AC power, the 1#~2# connects to the AC power directly.
When the power supply is DC power, forbid connecting the
1#~2# to the DC power directly. Add a DC power supply
39 41 43 45 47 49 module, then the DC power connect to the input terminal
of the DC power supply module, and the 1#~2# connect to
the output terminal of the DC power supply module,
3#,4#,5#: Fault trip contact output(4# common terminal) or else the intelligent controller will be damaged.
6#,7#,8#,9#: Auxiliary contact（normal open）
10#~11#: Communication output; 12#,13#: Signal alarm of load 1 output
14#,15# : Signal alarm of load 2 output; 16#,17#: Breaking signal output; 18#,19#: Closing signal output
20#: PE line; 21#: N phase input terminal
22#,23#,24#: A, B, C three phase power input terminal (note the sequence)(highest-voltage of AC400V)
25#,26# Connect to the N phase current transformer or the input terminal of the current leakage transformer.
The normal products without these terminals, if the customer special ordered, the cost extra added.
ST~DP: DP protocol module. There is no need for the ST-DP protocol module,
if the communication protocol is Modbus-RTV. But when the communication protocol is Profibus-DP,
the ST-DP protocol module is necessary, but the cost extra added.
ST power module IV: power converter (optional components)
ST201: Magnify the signal capacity of the controller. ( optional components)
If the customer special ordered, the cost extra added.
27#,28#: Under-voltage release(Connected to the main circuit); 29#,30#: Shunt release
31#,32#: Closing release; 33#,34#: Energy storage indicator
34#,35#: Energy storage motor; 36#,37#: Under-voltage time delay release
38#~51#: Auxiliary contact

Note:
a. Red colored part is to be connected by users
b. When the power system is three phase three wire, directly connect the Un to U2.
(If the voltage exceeds 400V, special explanation when ordered)
P-027 Air Circuit Breaker NA1

7. Installation

7.1 Installation
7.1.1 Unload the breaker from the soleplate of package. When the guide rod points to separated position and handle
If it is drawout type, firstly pull out the handle under can't be rotated any longer, pull out the handle and firmly
the drawer-base of breaker, and plug it into the hole grasp the aluminum handle on drawer-base, pull out the
on central part of plastic cover under the drawer-base breaker body and remove it form the base, then move the
crossbeam, anticlockwise turns the handle, the body base from the sole plate and clean up the dirty things inside
will slowly slide along the outside of drawer-base. the drawer-base.

Possible positions

7.1.2 Check the insulation resistance with a 500V megger, 7.1.3 Power supply
resistance should not be less than 20MΩ when NA1 devices can be supplied either from the top or
ambient temperature is 20℃±5℃ and relative from the bottom without reduction in performance,
humidity is 50%~70%. Otherwise dry it. in order to facilitate connection when installed in a
switchboard.

7.1.4 Put the breaker (fixed-type) or drawer-base (drawout-type) Mounting the circuit-breaker
into the installation-bracket, and make it fixed, directly It is important to distribute the weight of the device
connect the cable wire of main circuit to the bus wire of uniformly over a rigid mounting surface such as rails
fixed-type circuit breaker. Alternatively put breaker body or a base plate.
onto the slideway of drawer-base. Plug the handle into This mounting plane should be perfectly flat (tolerance
installation hole, clockwise turns it until the under-part of on support flatness: 2 mm).This eliminates any risk of
drawer-base points at the connection position and ”click” deformation which could interfere with correct
sound is heard. It indicates that breaker body has been operation of the circuit breaker.
connected to its place, then connect the cable of main NA1 devices can also be mounted on a vertical plane
circuit to drawer-base. using the special brackets.
NA1 Air Circuit Breaker P-028

Mounting with vertical brackets Mounting on rails

7.1.5 Partitions
A:non magnetic material
Sufficient openings must be provided in partitions to ensure
good air circulation around the circuit breaker;
Any partition between upstream and downstream connections
of the device must be made of nonmagnetic material.
For high-currents, of 2500 A and upwards, the metal supports
or barriers in the immediate vicinity of a conductor ;Metal
barriers through which a conductor passes must not form
a magnetic loop.

Busbars
The mechanical connection must be exclude the possibility
non magnetic material
of formation of a magnetic loop around a conductor.

7.1.6 Busbar connections

The busbars should be suitably adjusted to ensure the
connection points are positioned on the terminals before
the bolts B are inserted. The connections are held by the
supporter which is fixed to the framework of the
switchboard, in this way the circuit breaker terminals
do not have to support its weight C.
(This support should be placed close to the terminals).

B C
B
A

A
A
P-029 Air Circuit Breaker NA1

7.1.7 Main circuit adopts cable connection

Users should not apply too strong mechanical strength on
the terminals of Air Circuit Breaker. Extend the bus-bar of
circuit breaker with connecting bus-bar, position the wiring
piece of cable before inserting bolts; the cable should be
fixed on the frame of distributing cabinet firmly.

min18 min18

7.1.8 Clamping
1 2 3 4
Correct clamping of busbars depends on the tightening
torques used for the nuts and bolts,etc. Over-tightening
may have the same consequences as under-tightening.

For connecting busbars to the circuit breaker, the tightening 1 breaker terminal
2 busbar
torques to be used are shown in the table below. These
3 bolt
values are for use with copper busbars and steel nuts and 4 washer
bolts, class ≥8.8. 5 nut
6 spring washer

6 5

Examples

Preferred tightening torque for NA1's tightening components

Type of screw Application Preferred tightening torque

M3 Screws for secondary terminals 0.5~0.7 N·m
M10 Installing bolts of Air Circuit Breaker 38~55 N·m
M12 Connection terminals 61~94 N·m
NA1 Air Circuit Breaker P-030

Connected position Test position Disconnected position Drawout position

1.Both main circuit and control 1.The main circuit is disconnected,

Neither the main circuit Main body is out
circuit are connected. and the control circuit is connected.
nor the control circuit is connected. of the drawer seat.
2.Normal application conditions 2.Test application conditions.

7.2 Wiring the secondary circuit according to electric principle

diagram.
Note: Bolts, nuts, gaskets shouldn't be left inside the drawer
seat to avoid being blocked. Secondary connecting part
7.3 Operation Arcing chamber
Check the rated voltage of the following components
whether conforms to the power voltage . Such as under Main body
voltage release, shunt release, closing electromagnet,
motor-driven mechanism and intelligent controller.
Drawer seat
7.4 Maintenance
Check the technical parameters in time or add some
lubricating oil, etc.
This breaker structure is arranged vertically and modularized
composition with each functioncell separated, which make
the maintenance easy.
It has compact structure, reliable operation and strong free
maintenance capability. Please check the technical parameters Handle Slideway

on the nameplate in accordance with the requirements of

order before installation.

Making the secondary circuit power, the motor-driven

Manual energy-storage
mechanism can store energy automatically until hearing the click
and energy stored indicating on the panel.

Otherwise press the storage handle for 6 times until hearing

the click and the indicator display energy stored

And the closing operation can be realized either by closing

electromagnet or manual button.

Shake with the manual energy-storage handle

up and down about six times to "click".
P-031 Air Circuit Breaker NA1

8. Recommendation for user's connecting bus-bar

Inm(A) NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH NA1-3200X/NA1-3200XN NA1-4000X NA1-6300X/NA1-6300XN

In(A) 200 400 630 800 1000 630 800 1000 1250 1600 2000 2000 2500 3200 4000/3P 4000/4P 4000 5000 6300
Thickness(mm) 5 5 5 6 8 5 6 8 10 12 10 8 10 10 10 - 10 10 10
Busbar Width(mm) 30 30 40 50 50 60 60 60 60 60 60 100 100 100 120 - 100 100 100
Number 1 2 2 2 2 2 2 2 2 2 3 2 2 4 4 - 5 7 8

Note: the specifications in the table is obtained as the ambient temperature of air circuit breaker is 40℃, with open installation; this is in
compliance with the specification of copper busbars adopted under the heating conditions regulated in IEC/EN60947-2.

9. Power loss

Inm(A) NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH NA1-3200X/NA1-3200XN NA1-4000X NA1-6300X/NA1-6300XN

In(A) 200 400 630 800 1000 630 800 1000 1250 1600 2000 2000 2500 3200 4000/3P 4000/4P 4000 5000 6300

Power Drawer type 40 101 123 110 171 70 110 172 268 440 530 384 600 737 921 - 575 898 1426
loss (W) Fixed type 33 85 107 94 146 34.4 50 78 122 200 262 200 312 307 450 - - - -

10. A2S curve

I2t（A2s×106）
460

320

200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
20 40 60 80 100 120 Is（kA）

Is: prospective symmetrical current(of an a.c. circuit)

11. Temperature compensation correction

Ambient NA1-3200X/NA1-3200XN NA1-6300X/

Standard NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH
temperature NA1-4000X NA1-6300XN

40℃ 200 400 630 800 1000 630 800 1000 1250 1600 2000 2000 2500 3200 4000 4000 5000 6300
45℃ 200 395 623 800 985 630 800 1000 1250 1600 2000 2000 2500 3200 3800 4000 5000 6000
50℃ 200 384 605 800 960 630 800 1000 1250 1600 2000 2000 2500 3200 3600 4000 5000 5600

IEC/EN60947-2 55℃ 200 328 584 800 924 630 800 1000 1250 1500 1900 2000 2300 3000 3400 4000 4800 5400
60℃ 200 248 548 800 870 610 800 1000 1250 1300 1800 2000 2200 2800 3200 4000 4800 5200
65℃ 192 192 500 800 810 610 800 1000 1250 1300 1650 2000 2200 2600 3000 4000 4600 5100
70℃ 170 170 473 750 750 473 800 1000 1200 1200 1400 2000 2000 2200 2520 4000 4000 4200
NA1 Air Circuit Breaker P-032

Note: The ACB is to calibrated at 40℃, special application please refer to the table above and the curve below.

1100 4200
1000 4000
900 3800

800 3600

Rated current （A）

In=200A 3400
700
3200 In=2000A
600 In=400A
3000 In=2500A
500 In=630A
2800 In=3200A
400 In=800A
2600 In=4000A
300 In=1000A
2400
200 2200
100 2000
0 1800
40 45 50 55 60 65 70 40 45 50 55 60 65 70
Ambient temperature（℃） Ambient temperature（℃）
NA1-1000X NA1-3200X/NA1-3200XN/NA1-4000X

2000 6400
1900 6200
1800
6000
1700
1600 5800
Rated current （A）

Rated current （A）

1500 In=630A 5600

1400 In=800A 5400
1300 5200 In=4000A
1200 In=1000A
5000 In=5000A
1100 In=1250A
1000 4800 In=6300A
900 In=1600A 4600
800 In=2000A 4400
700 4200
600
4000
500
400 3800
40 45 50 55 60 65 70 40 45 50 55 60 65 70

Ambient temperature（℃） Ambient temperature（℃）

NA1-2000X/NA1-2000XN/NA1-2000XH NA1-6300X/NA1-6300XN
P-033 Air Circuit Breaker NA1

12. Coordination recommendations

Capacity of transformer Breaking capacity of

Rated current Short circuit current
(kVA) & parallelly air circuit breaker for
of transformer In(A) of main circuit (kA)
connected number main circuit (kA)

1×250 360 9 9

2×250 360 9 9

3×250 360 9 18.5

1×315 455 11.4 11.4

2×315 455 11.4 11.4

3×315 455 11.4 22.7

1×400 578 14.4 14.4

2×400 578 14.4 14.4

3×400 578 14.4 28.8

1×500 722 18 18

2×500 722 18 18

3×500 722 18 36.1

1×630 910 22.7 22.7

2×630 910 22.7 22.7

3×630 910 22.7 44.5

1×800 1154 19.3 19.3

2×800 1154 19.3 19.3

3×800 1154 19.3 38.5

1×1000 1444 24 24

2×1000 1444 24 24

3×1000 1444 24 48.1

1×1250 1805 30 30

2×1250 1805 30 30

3×1250 1805 30 60.1

1×1600 2310 36.5 36.5

2×1600 2310 36.5 36.5

3×1600 2310 36.5 73

1×2000 2887 48.2 48.2

2×2000 2887 48.2 48.2

3×2000 2887 48.2 96.3

1×2500 3608 60 60

2×2500 3608 60 60

1×3150 4550 75.8 75.8

2×3150 4550 75.8 75.8

NA1 Air Circuit Breaker P-034

Type of air circuit Number and area of the Breaking capacity of

Air circuit breaker
breaker for busbar for main circuit air circuit breaker
for branch circuit
main circuit (n×W×T) for branch circuit (kA)

NA1-1000X-400 9

NA1-1000X-400 2×(5×30) 18.5 NA1, NM8

NA1-1000X-400 27.5

NA1-1000X-630 11.4

NA1-1000X-630 2×(5×40) 22.7 NA1, NM8

NA1-1000X-630 34.1

NA1-1000X-630 14.4

NA1-1000X-630 2×(5×40) 28.8 NA1, NM8

NA1-1000X-630 43.2

NA1-1000X-800 18

NA1-1000X-800 2×(6×50) 36.1 NA1, NM8

NA1-1000X-800 54.1

NA1-1000X-1000 22.7

NA1-1000X-1000 2×(8×50) 44.5 NA1, NM8

NA1-2000X-1000 67.2

NA1-2000X-1250 19.3

NA1-2000X-1250 2×(10×60) 38.5 NA1, NM8

NA1-2000X-1250 57.8

NA1-2000X-1600 24

NA1-2000X-1600 2×(12×60) 48.1 NA1, NM8

NA1-2000X-1600 72.1

NA1-2000X-2000 30

NA1-2000X-2000 3×(10×60) 60.1 NA1, NM8

NA1-2000X-2000 90.1

NA1-3200X-2500 36.5

NA1-3200X-2500 2×(10×100) 73 NA1, NM8

NA1-3200X-2500 109.5

NA1-3200X-3200 48.2

NA1-3200X-3200 4×(10×100) 96.3 NA1, NM8

NA1-3200X-3200 144.5

NA1-6300X-4000 60
4×(10×120) NA1, NM8
NA1-6300X-4000 120

NA1-6300X-5000 75.8
7×(10×100) NA1, NM8
NA1-6300X-5000 151.6
P-035 Air Circuit Breaker NA1

13. Selectivity protection

13.1 Selective protection between NM8 and NA1

Circuit breaker NA1-2000X/NA1-2000XN/NA1-2000XH

Rated
630 800 1000 1250
current (A)

Default setting ratings

5.04 6.4 8 10
of short time-delay 8In (kA)

Downstream Upstream Setting

0.63～9.45 0.8~12 1~15 1.25~18.75
range (kA)

Delayed tripping
0.1, 0.2, 0.3, 0.4
time (s)

Returnable time 0.06, 0.14, 0.23, 0.35

Frame size Rated Instantaneous

rated current current (A) setting ratings (kA)

0.16 0.63~9.45 0.8~12 1~15 1.25~18.75

16
0.19(motor) 0.63~9.45 0.8~12 1~15 1.25~18.75

0.2 0.63~9.45 0.8~12 1~15 1.25~18.75

20
0.24(motor) 0.63~9.45 0.8~12 1~15 1.25~18.75

0.25 0.63~9.45 0.8~12 1~15 1.25~18.75

25
0.30(motor) 0.63~9.45 0.8~12 1~15 1.25~18.75

0.32 0.63~9.45 0.8~12 1~15 1.25~18.75

32
0.38(motor) 0.63~9.45 0.8~12 1~15 1.25~18.75

0.40 0.63~9.45 0.8~12 1~15 1.25~18.75

40
0.48(motor) 0.6624~9.45 0.8~12 1~15 1.25~18.75
NM8-125
NM8S-125
0.50 0.69~9.45 0.8~12 1~15 1.25~18.75
50
0.60(motor) 0.828~9.45 0.828~12 1~15 1.25~18.75

0.63 0.8694~9.45 0.8694~12 1~15 1.25~18.75

63
0.75(motor) 1.035~9.45 1.035~12 1.035~15 1.25~18.75

0.80 1.104~9.45 1.104~12 1.104~15 1.25~18.75

80
0.96(motor) 1.325~9.45 1.325~12 1.325~15 1.325~18.75

1.0 1.38~9.45 1.38~12 1.38~15 1.38~18.75

100 1.20(motor) 1.656~9.45 1.656~12 1.656~15 1.656~18.75

1.25 1.725~9.45 1.725~12 1.725~15 1.725~18.75

125
1.5(motor) 2.07~9.45 2.07~12 2.07~15 2.07~18.75

1.0 1.38~9.45 1.38~12 1.38~15 1.38~18.75

100
1.2(motor) 1.656~9.45 1.656~12 1.656~15 1.656~18.75

1.6 2.208~9.45 2.208~12 2.208~15 2.208~18.75

160
1.92(motor) 2.65~9.45 2.65~12 2.65~15 2.65~18.75
NM8-250
NM8S-250
2.0 2.76~9.45 2.76~12 2.76~15 2.76~18.75
200
2.4(motor) 3.312~9.45 3.312~12 3.312~15 3.312~18.75

2.5 3.45~9.45 3.45~12 3.45~15 3.45~18.75

250
3.0(motor) 4.14~9.45 4.14~12 4.14~15 4.14~18.75
NA1 Air Circuit Breaker P-036

NA1-3200X/NA1-3200XN NA1-4000X NA1-6300X/NA1-6300XN

1600 2000 2000 2500 3200 4000 4000 5000 6300

12.8 16 16 20 25.6 32 32 40 50.4

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

0.1, 0.2, 0.3, 0.4

0.06, 0.14, 0.23, 0.35

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4～60 5~75 6.3~94.5

1.656~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4～60 5~75 6.3~94.5

1.725~24 1.725~30 1.725~30 1.725~37.7 1.725~48 1.725~60 1.725~60 1.725~75 1.725~94.5

2.07~24 2.07~30 2.07~30 2.07~37.7 2.07~48 2.07~60 2.07~60 2.07~75 2.07~94.5

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4～60 5~75 6.3~94.5

1.656~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4～60 5~75 6.3~94.5

2.208~24 2.208~30 2.208~30 2.5~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

2.65~24 2.65~30 2.65~30 2.65~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

2.76~24 2.76~30 2.76~30 2.76~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

3.312~24 3.312~30 3.312~30 3.312~37.7 3.312~48 4~60 4~60 5~75 6.3~94.5

3.45~24 3.45~30 3.45~30 3.45~37.7 3.45~48 4~60 4~60 5~75 6.3~94.5

4.14~24 4.14~30 4.14~30 4.14~37.7 4.14~48 4.14~60 4.14~60 5~75 6.3~94.5
P-037 Air Circuit Breaker NA1

Circuit breaker NA1-2000X/NA1-2000XN/NA1-2000XH

Rated
630 800 1000 1250
current (A)

Default setting ratings

5.04 6.4 8 10
of short time-delay 8In (kA)
Downstream Upstream
Setting
0.63～9.45 0.8~12 1~15 1.25~18.75
range (kA)

Delayed tripping
0.1, 0.2, 0.3, 0.4
time (s)

Returnable time 0.06, 0.14, 0.23, 0.35

Frame size Rated Instantaneous

rated current current (A) setting ratings (kA)

2.5 3.45~9.45 3.45~12 3.45~15 3.45~18.75

250 3.0(motor) 4.14~9.45 4.14~12 4.14~15 4.14~18.75

3.15 4.347~9.45 4.347~12 4.347~15 4.347~18.75

315 3.78(motor) 5.216~9.45 5.216~12 5.216~15 5.216~18.75

3.5 4.83~9.45 4.83~12 4.83~15 4.83~18.75

350 4.2(motor) 5.796~9.45 5.796~12 5.796~15 5.796~18.75
NM8-630
4.0 5.52~9.45 5.52~12 5.52~15 5.52~18.75
NM8S-630 400 4.8(motor) 6.624~9.45 6.624~12 6.624~15 6.624~18.75

5.0 6.9~9.45 6.9~12 6.9~15 6.9~18.75

500 6.0(motor) 8.28~9.45 8.28~12 8.28~15 8.28~18.75

6.3 8.694~9.45 8.694~12 8.694~15 8.694~18.75

630 7.56(motor) 10.44~12 10.44~15 10.44~18.75

6.3 8.694~9.45 8.694~12 8.694~15 8.694~18.75

NM8S-630 630 7.56(motor) 10.44~12 10.44~15 10.44~18.75

7.0 9.66~12 9.66~15 9.66~18.75

700 8.4(motor) 11.59~12 11.59~15 11.59~18.75

8.0 11.04~12 11.04~15 11.04~18.75

800 9.6(motor) 13.25~15 13.25~18.75

10 13.8~15 13.8~18.75
1000 12(motor)
NM8-1250 16.56~18.75
NM8S-1250 17.25~18.75
12.5
1250 15.0(motor)
NA1 Air Circuit Breaker P-038

NA1-3200X/NA1-3200XN NA1-4000X NA1-6300X/NA1-6300XN

1600 2000 2000 2500 3200 4000 4000 5000 6300

12.8 16 16 20 25.6 32 32 40 50.4

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

0.1, 0.2, 0.3, 0.4

0.06, 0.14, 0.23, 0.35

3.45~24 3.45~30 3.45~30 3.45~37.7 3.45~48 4~60 4~60 5~75 6.3~94.5

4.14~24 4.14~30 4.14~30 4.14~37.7 4.14~48 4.14~60 4.14~60 5~75 6.3~94.5

4.347~24 4.347~30 4.347~30 4.347~37.7 4.347~48 4.347~60 4.347~60 5~75 6.3~94.5

5.216~24 5.216~30 5.216~30 5.216~37.7 5.216~48 5.216~60 5.216~60 5.216~75 6.3~94.5

4.83~24 4.83~30 4.83~30 4.83~37.7 4.83~48 4.83~60 4.83~60 5~75 6.3~94.5

5.796~24 5.796~30 5.796~30 5.796~37.7 5.796~48 5.796~60 5.796~60 5.796~75 6.3~94.5

5.52~24 5.52~30 5.52~30 5.52~37.7 5.52~48 5.52~60 5.52~60 5.52~75 6.3~94.5

6.624~24 6.624~30 6.624~30 6.624~37.7 6.624~48 6.624~60 6.624~60 6.624~75 6.624~94.5

6.9~24 6.9~30 6.9~30 6.9~37.7 6.9~48 6.9~60 6.9~60 6.9~75 6.9~94.5

8.28~24 8.28~30 8.28~30 8.28~37.7 8.28~48 8.28~60 8.28~60 8.28~75 8.28~94.5

8.694~24 8.694~30 8.694~30 8.694~37.7 8.694~48 8.694~60 8.694~60 8.694~75 8.694~94.5

10.44~24 10.44~30 10.44~30 10.44~37.7 10.44~48 10.44~60 10.44~60 10.44~75 10.44~94.5

8.694~24 8.694~30 8.694~30 8.694~37.7 8.694~48 8.694~60 8.694~60 8.694~75 8.694~94.5

10.44~24 10.44~30 10.44~30 10.44~37.7 10.44~48 10.44~60 10.44~60 10.44~75 10.44~94.5

9.66~24 9.66~30 9.66~30 9.66~37.7 9.66~48 9.66~60 9.66~60 9.66~75 9.66~94.5

11.59~24 11.59~30 11.59~30 11.59~37.7 11.59~48 11.59~60 11.59~60 11.59~75 11.59~94.5

11.04~24 11.04~30 11.04~30 11.04~37.7 11.04~48 11.04~60 11.04~60 11.04~75 11.04~94.5

13.25~24 13.25~30 13.25~30 13.25~37.7 13.25~48 13.25~60 13.25~60 13.25~75 13.25~94.5

13.8~24 13.8~30 13.8~30 13.8~37.7 13.8~48 13.8~60 13.8~60 13.8~75 13.8~94.5

16.56~24 16.56~30 16.56~30 16.56~37.7 16.56~48 16.56~60 16.56~60 16.56~75 16.56~94.5

17.25~24 17.25~30 17.25~30 17.25~37.7 17.25~48 17.25~60 17.25~60 17.25~75 17.25~94.5

20.7~24 20.7~30 20.7~30 20.7~37.7 20.7~48 20.7~60 20.7~60 20.7~75 20.7~94.5
P-039 Air Circuit Breaker NA1

13.2 Selective protection in NA1

Circuit breaker NA1-2000X/NA1-2000XN/NA1-2000XH

Rated
630 800 1000 1250
current (A)

Default setting ratings

5.04 6.4 8 10
of short time-delay 8In (kA)

Downstream Upstream Setting

0.63～9.45 0.8~12 1~15 1.25~18.75
range (kA)

Delayed tripping
0.1, 0.2, 0.3, 0.4
time (s)

Returnable time 0.06, 0.14, 0.23, 0.35

Frame size Rated Default instantaneous

rated current current (A) setting ratings 12In (kA)

400 4.8 6.348~9.45 6.348~12 6.348~15 6.348~18.75

630 7.56 9.998~12 9.998~15 9.998~18.75
800 9.6 12.696~15 12.696~18.75
NA1-2000X
1000 12 15.87~18.75
1250 15
1600 19.2
2000 24
2000 24

NA1-3200X 2500 30
3200 38.4
3200 38.4
NA1-4000X 4000 48
4000 48
5000 60
NA1-6300X
6300 75

Note: It can satisfy the selective protection if only the short time-delay setting value of the superior breaker 1.32 times more than the
subordinate breaker, when the instantaneous setting value is adjustive.
NA1 Air Circuit Breaker P-040

NA1-3200X/NA1-3200XN NA1-4000X NA1-6300X/NA1-6300XN

1600 2000 2000 2500 3200 4000 4000 5000 6300

12.8 16 16 20 25.6 32 32 40 50.4

1.6~24 2~30 2~30 2.5~37.7 3.2~48 4~60 4~60 5~75 6.3~94.5

0.1, 0.2, 0.3, 0.4

0.06, 0.14, 0.23, 0.35

6.348~24 6.348~30 6.348~30 6.348~37.7 6.348~48 6.348~60 6.348~60 6.348~75 6.348~94.5

9.998~24 9.998~30 9.998~30 9.998~37.7 9.998~48 9.998~60 9.998~60 9.998~75 9.998~94.5
12.696~24 12.696~30 12.696~30 12.696~37.7 12.696~48 12.696~60 12.696~60 12.696~75 12.696~94.5
15.87~24 15.87~30 15.87~30 15.87~37.7 15.87~48 15.87~60 15.87~60 15.87~75 15.87~94.5
19.837~24 19.837~30 19.837~30 19.837~37.7 19.837~48 19.837~60 19.837~60 19.837~75 19.837~94.5
25.392~30 25.392~30 25.392~37.7 25.392~48 25.392~60 25.392~60 25.392~75 25.392~94.5
31.74~37.7 31.74~48 31.74~60 31.74~60 31.74~75 31.74~94.5
31.74~37.7 31.74~48 31.74~60 31.74~60 31.74~75 31.74~94.5
39.675~48 39.675~60 39.675~60 39.675~75 39.675~94.5
50.784~60 50.784~60 50.784~75 50.784~94.5
50.784~60 50.784~60 50.784~75 50.784~94.5
63.48~75 63.48~94.5
63.48~75 63.48~94.5
79.35~94.5
P-041 Air Circuit Breaker NA1

Intelligent Controller of NA1 series

14 Protection Features of intelligent controller

14.1 M/H and 3M/3H intelligent controller UI

M/H control 3M/3H control

Display window “Check”

Display current value, setting value, tripping time and Switch to query menu
so on “Ir” light
“Set” Overload long delay fault indication
Switch to setting menu “Isd” light
“Up” Short-circuit Short delay indication
Change the marquee or the selected parameter “Test”
“Return” Trip test button
Escape from this grade and return to upper menu or “Ii” light
cancel the current selected parameter Short-circuit instantaneous fault indication
“Enter” “Ig” light
Enter into the next menu directed by the current item, Asymmetric earthing or neutral line fault indication
or select current parameter and store modifications Alarm light
“Down” Communication light
Change the marquee or the selected parameter Run light

Note: Method of 3M/3H controller application please refer to 3M/3H controller instruction.

14.2 3M/3H controller default interface and menu structure 3M/3H controller default interface

3M/3H controller has four subjects menus and a default

interface:
The subjects menus are composed of 4 parts: measurement
menu, parameter set menu, protection parameter set menu,
history and maintenance menu.
NA1 Air Circuit Breaker P-042

14.3 Explanation of M/H controller symbols

14.3.1 Explanation of symbols for reference

No. symbol explanation

1 Ir= tr= Long delay current setting, long delay time setting
2 Isd= tsd= Short delay current setting, short delay time setting
3 Ig= tg= Earthing current setting, earthing time setting
4 Ii= Instantaneous current setting
5 N= Neutral line protection parameter setting
6 TM Trip simulated by software
7 TRIP Tripped
8 RUN Run normally
9 SET Normally on: in settable state; Flickering: modifiable parameter
10 LIN Storing state
11 P┠ 0 Protection setting interface
12 ГES Trip simulated by software setting interface
13 RLR Alarm setting or query interface
14 SYS System setting interface (current calibration , frequency setting …)
15 DBS Communication setting interface of H-type controller
16 DOS DO setting interface (H type with DO function )
17 FRU Fault record query interface
18 COU Operation times and life query interface
19 HDГ Thermal capacity query interface
20 DOC DO state query interface
21 H Thermal capacity data
22 F-- Fault record number
23 R-- Alarm record number
24 Lg L1 L2 L3 LN Earthing ,A,B,C,N phase

The corresponding LED lamp will flash to indicate the fault type after tripping.
25
The LED lamps are always on when the system is normal.

14.3.2 Operation and display instruction

There are four states, default state, setting state, query state and tripping state.
① Default state: default state is also called measuring state. All fault indicating lamps are off and maximum phase current is displayed.
In this state, if “▲” or “▼” button is pressed, L1,L2,L3(LN),Lg current can be displayed in turn.
Example is shown below:

L1 phase current display interface

P-043 Air Circuit Breaker NA1

②Setting state: press “Set” button in default interface to enter into setting interface. Current protection parameters, overload pre-alarm
value, earthing alarm threshold value and delay time can be queried or changed in setting state. Tripping can be simulated by software. In
this state, “▲” or “▼” button can be pressed to add or subtract value when “SET” indicating lamp is flickering. Don’t forget to
press “Enter” button to save data after setting.
Example 1 of changing long delay time is shown below:

3 times

Example 2 of short delay tripping simulated by software is shown below:

long
press
NA1 Air Circuit Breaker P-044

Example3 of setting earthing alarm threshold current is shown below:

Long press

③Query state: press “Check” button in default interface to enter into query interface. Last 8 fault records, last 8 alarm records, breaker
operation times, life record and thermal capacity can be queried in query state.
Example4 of querying second fault record is shown below:
P-045 Air Circuit Breaker NA1

Example5 of querying first alarm record is shown below:

Example6 of querying breaker operation times and life record is shown below:
NA1 Air Circuit Breaker P-046

Example7 of querying thermal capacity after tripping is shown below:

④Tripping state: “Reset” button should be press to return default interface after tripping at fault.

TRIP

RUN

Press “Test” button to simulate Instantaneous trip

TRIP TRIP TRIP TRIP

KA s A s

L2 L2

RUN RUN RUN RUN

Instantaneous trip state Earthing trip state

P-047 Air Circuit Breaker NA1

14.3.3 Controller functions list

M type H type

1 over-current protection (overload, short delay, instantaneous, earthing); 1 over-current protection (overload, short delay, instantaneous, earthing);
vector sum grounding mode. vector sum grounding mode.
2 Neutral line protection 2 Neutral line protection
3 Current measurement 3 Current measurement
4 two test functions: 4 two test functions:
(1)Instantaneous trip test simulated by mechanical button (1)Instantaneous trip test simulated by mechanical button
(2)Other trip tests simulated by software (2)Other trip tests simulated by software
5 Ten fault records 5 Ten fault records
6 Ten alarm records 6 Ten alarm records
7 MCR protection 7 MCR protection
8 operation times records 8 operation times records
9 thermal capacity 9 thermal capacity
10 overload pre-alarm 10 overload pre-alarm
11 communication function: MODBUS protocol
12 four DO function (optional)

3M type 3H type

1 all functions of M-type controller are included 1 all functions of 3M-type controller are included
2 HMI:128*64 LCD 2 voltage measurement and protection
3 frequency measurement and protection
4 power measurement and protection
5 electric energy, power-factor, harmonic measurement
6 communication function: MODBUS protocol
7 DI/DO function

14.4 specifications of characteristics

14.4.1 Over-current protection characteristic curve
Over-current protection characteristic curve

Ir=(0.4~1)In

1000 tr=(15~480)s

100

10
T(s)

Isd=(1.5~15)Ir(max40/50kA)

I2t ON
1 I2t OFF

0.4
0.3
0.2

0.1 0.1

Ii=(1.5~20)In
(max65/75kA)

0.01
0.5 5 3 30
I(xIr) I(xIn)
NA1 Air Circuit Breaker P-048

14.4.2 Overload long time-delay protection

Operating characteristics

Current Ratings Time

tolerance Current Action time(s)
Range(Ir) tolerance

≤1.05Ir >2h Non-trip

＞1.3Ir <1h trip
(0.4~1)In+ OFF ±10%
1.5Ir(setting time) 15 30 60 120 240 480 ±10%
2.0Ir 8.4 16.9 33.7 67.5 135 270 ±10%

Phase N Overload and

100% or 50%(Applicable to 3P+N or 4P)
Over-Current Characteristic

14.3 Short-circuit short-delay protection

Short-circuit short delay protection has two protection modes. One is inverse time and definite time protection. I2Tsd= (8Ir)2tsd works
when current is low. In this formula, I is actual current, Tsd is actual trip time, tsd is set trip delay time. When I is over inverse time set
value but below 8Ir, controller will operate according to over-current protection characteristic curve. When I is over both of inverse
time set value and 8Ir, controller will operate according to definite time protection. The other is definite time protection and set time is
0.11s, 0.21s, 0.31s, and 0.41s. When I is over Isd but below Ii, controller will operate according to definite time protection.
Operating characteristics

Current Ratings Time

tolerance Current Action time(s)
Range(Isd) tolerance

≤0.9Isd In the 2tsd Non-trip

＞1.1Isd In the 2tsd Delayed-trip
(1.5~15)Ir+ OFF ±10%
tsd 0.1 0.2 0.3 0.4 ±15%
Returnable time 0.06 0.14 0.25 0.33 ±15%

Note: a. When the intelligent controller is FrameⅡ (Inm=3200A、4000A), Isd shouldn’t be more than 40KA.
b. When the intelligent controller is FrameⅢ (Inm=6300), Isd shouldn’t be more than 50KA.
c. When tsd is 0.1s or 0.2s, time permissible error is ±0.040s.

14.4.4 Short-circuit instantaneous protection

Instantaneous protection trip time should be less than 100ms.
Operating characteristics

Current Ratings
tolerance Current Time tolerance
Range(Ii)

≤0.85Ii In the 0.2s Non-trip

(1.5~20)In+ OFF ±15%
＞1.15Ii In the 0.2s trip

Note: a. When the intelligent controller is FrameⅠ (Inm=2000A), Ii shouldn’t be more than 50KA.
b. When the intelligent controller is FrameⅡ (Inm=3200A、4000A), Ii shouldn’t be more than 65KA.
c. When the intelligent controller is FrameⅢ (Inm=6300), Ii shouldn’t be more than 75KA.
P-049 Air Circuit Breaker NA1

14.4.5 Earthing protection

Earthing protection has definite time characteristic. Fault delay time is shown below.

Earthing protection characteristic curve

Ig=(0.2~0.8)In，
min100A，max1200A
1000
或500A~1200A

100

10
T(s)

0.4
0.3
0.2

0.1 0.1

0.01
0.1 1 10
I(xIn)

Operating characteristics of single-phase earthing protection

Current Ratings Time

tolerance Current Action time(s)
Range(Ig) tolerance

≤0.9Ig In the 2tg Non-tripping

Inm=1000/2000，
(0.2~0.8)In+ OFF ＞1.1Ig In the tg±0.032s or tg(1±25%) Tripping
±10%
Inm=3200/4000/6300, tg 0.1 0.2 0.3 0.4 ±15%
(500~1200)A+ OFF
Returnable time 0.06 0.14 0.25 0.33 ±15%

Note: a. When tg is 0.1s or 0.2s, time permissible error is ±0.040s;

b. When Inm is 1000A, Ig should be more than 100A. When Inm is 2000A, Ig shouldn' t be more than 1200A.
c. When Inm is 3200A, 4000A or 6300A, Ig should be between 500A and 1200A.

Single-phase protection is usually used in neutral-point solid ground system. Controller has two different protection modes, being
vector sum mode and external transformer mode.
In three-phase three-wire system using 3-pole breaker without external transformer, earthing fault signal comes from three- phase current
vector sum. Operating characteristic is definite time protection.
3PT mode

Contr
-oller
NA1 Air Circuit Breaker P-050

In three-phase four-wire system using 4-pole breaker without external transformer , earthing fault signal comes from three- phase current
and N-Pole current vector sum. Operating characteristic is definite time protection.
4PT mode

Contr
-oller
C
In three-phase four-wire system using 3-pole breaker with external N-pole transformer, earthing fault signal comes from three- phase and
N-Pole current vector sum. Operating characteristic is definite time protection.
(3P+N)T mode

Contr
-oller

Note:
① External N-pole transformer (connected to 6#, 7# terminal for NA1-1000, connected to 25#, 26# terminal for NA1-2000-6300) is a special product. Default lead wire is
2 meters long.
② Earthing protection in 3PT mode can only be used in balance load. It should be turned off or set value above allowable unbalance current when the load is unbalance or
the controller may operate.
③ The distance between external transformer and breaker should be less than 5m in (3P+N)T mode. When lead wire of external transformer needs to be longer than 2 meters,
special requirement should be noted when ordering.

15. Accessories
15.1 Under-voltage release
Without power supply, under-voltage release can't close.
It is classified into instantaneous and time-delay type.
Delay time 1s, 3s, 5s, 7s are fixed for NA1-1000; 1s, 3s, 5s are fixed for NA1-2000, 3200, 4000, 6300.
Within 1/2 time-delay range, circuit breaker does not trip when power voltage recovers and exceeds 85%Ue.

Characteristic

Type NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Rated control power voltage Us(V) AC230, 400 AC400, 230, 127 DC220, 110
Action voltage(V) (0.35-0.7)Us
Reliable making voltage(V) (0.85-1.1)Us
Reliable non-making voltage(V) ≤0.35Us
Power loss(W) 20VA 48VA 48W

Optional configure: Auto suction type under-voltage release, and this device can substitute normal one, it can prevent mechanism form
misoperation.
Make sure there is power supply on the under-voltage release, before making the circuit breaker.
P-051 Air Circuit Breaker NA1

15.2 Shunt release

Shunt release can realize the remote control to break the circuit breaker.
Characteristic

Type NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Rated control power voltage Us(V) AC230, 400 DC220, 110 AC400, 230, 127 DC220, 110
Work voltage (0.7-1.1)Us
Power loss 56VA 250W 300VA 132W 70W
Breaking time (50±10)ms (50±10)ms (30~50)ms (30~50)ms

Forbid making the power for long time to avoid the shunt release being damaged.

15.3 Closing electromagnet

After the motor finishing the energy storage, closing release can instantly close the circuit breaker.
Characteristic

Type NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Rated control power voltage Us(V) AC230, 400 DC220, 110 AC400, 230, 127 DC220, 110
Work voltage (0.85-1.1)Us
Power loss (W) 56VA 250W 300VA 132W 70W
Closing time (50±10)ms (50±10)ms ≤70ms ≤70ms

Forbid making the power for long time to avoid the closing release being damaged.

15.4 Motor-driven energy-storage mechanism

With the function of motor-driven energy storing and auto restoring energy after closing the circuit breaker, the mechanism can
ensure closing the circuit breaker instantly after breaking the circuit breaker.
Manual energy-store is available.

Characteristic

Type NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Rated control power voltage Us(V) AC230, 400 DC220, 110 AC400, 230, 127 DC220, 110
Work voltage (0.85-1.1)Us
Power loss (W) 90W 90W 85/110/150W 85/110/150W
Closing time ≤5s ≤5s ≤5s ≤5s
Energy-storage time
Operation frequency
NA1 Air Circuit Breaker P-052

15.5 Auxiliary contact NO

Standard model: 4NO(normal open)/4NC(normal close) and 6NC(normal close).

Characteristic

Type NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Rated voltage (V) AC230 AC400 DC220 AC230 AC400 DC220

conventional free-air thermal current Ith (A) 10 6 0.5 6 6 6
Rated control capacity 300VA 100VA 60W 300VA 300VA 60W

NA1-1000X NA1-2000X/NA1-2000XN/NA1-2000XH/NA1-3200X/NA1-3200XN/NA1-4000X/NA1-6300X/NA1-6300XN

Category Voltage Current Category Voltage Current

AC230V 1.3A AC230V 1.3A

AC-15 AC-15
AC400V 0.25A AC400V 0.75A
DC110V 0.55A DC110V 0.55A
DC-13 DC-13
DC220V 0.27A DC220V 0.27A

15.6 Doorcase 15.7 Phases barrier (Optional)

Installed on the door of the distribution cubicle, for sealing Installed between the busbars to increase the creepage
the distribution cubicle and making the protection class to distance.
IP40( fixed type and drawout type).

15.8 Transparent shield (NA1-2000) (Optional)

Installed on the doorcase of the cubicle's small door,
make the protection class to IP54. It is suitable for the
fixed, drawout type circuit breaker and the load switch.
P-053 Air Circuit Breaker NA1

15.9 Off position locking mechanism

When the circuit breaker is disconnected, padlock can be used to lock it after pulling out the lock lever, then the circuit breaker
can't be “Test” or “connected” position.( Padlock is prepared by users)
15.10 Key lock
Lock the circuit breaker on the OFF position, then the circuit breaker can't be closed.
Locks and keys will be provided by us.
Separate lock and key is matched with one set of the circuit breaker.
Three same locks and two same keys are matched with three circuit breaker.
Note: Before pulling out the key, the break pushbutton should be pressed first, rotate the key anticlockwise, then pull it out.

★ NA1Install the locking system

1. Components of the locking system:

+ +
lock washer key

2. Installation sequence:

1. Boring here, and 2. Put the washer into 3. Install the 4. Push the red button “ON”, and take
polish the hole the hole lock here the key out, then install the cover.
make it smooth

15.11 Cable mechanical interlock

It can realize the interlock of two horizontal or vertical-installed, three poles or four poles ,
drawout type or fixed type circuit breaker.
a. If need bend the cable, make sure the radian is more than 120°.
b. Check and make sure enough lubricating oil of the cable.
c. The maximum distance between two interlock circuit breakers is 1.5m.

1.5m(max)
Circuit diagram Available running manner

1QF 2QF
0 0
1QF 2QF
0 1
1 0

Notes: a. when the steel cable needs to be bent, enough transition arc should be reserved to guarantee flexible movement of steel cable;
b. check the steel cable and make sure there is enough lubricant in the steel cable to guarantee flexible movement of steel cable.
NA1 Air Circuit Breaker P-054

15.12 Connecting-rod type mechanical interlock

Two vertical-installed three-poles or four-poles, drawout-type or fixed type circuit breakers realize the interlock between one
breaker with another two different-state breakers.

Circuit diagram Available running manner

Manner 1: three power supplies are provided

for one circuit breaker only

1QF 2QF
50

0 0
52 60 1QF 2QF
175 0 1
40
190
1 0
0.9m(max)
50

52 60
175
40
190
P-055 Air Circuit Breaker NA1

16. Maintenance and Overhaul of Circuit Breaker

Safety Precautions
The following operations must be executed in turn before conducting the maintenance or overhaul of circuit breakers:
a. Circuit breaker opening operation to ensure the circuit breaker is in an opening state;
b. Disconnecting the upper-level knife switch (if any) to ensure the main circuit and secondary circuit are uncharged;
c. Circuit breaker discharging, opening operation to ensure the circuit breaker is in a discharging and opening state;
d. The components which the personnel might contact must be uncharged. Keep Safe

Maintenance and overhaul cycle

Condition Environment Maintenance cycle Overhaul cycle Remarks

The air should be always kept Every six months Once per year Confirming to IEC60947-2
clean and dry. There is no corrosive gas. (every six months for more Requirement for general
The temperature is in between -5℃~+40℃ than 3 years of mounting environmental conditions.
General environment
The humidity should conform to Specification period)
1.3 Operating Conditions c Requirement for
extreme atmosphere conditions.

Low temperature -5℃~-40℃ or high Every three months Every six months
temperature 40℃～65℃ or humidity≥90% (every three months for
Severe environment more than 3 years of
mounting period)

Places with more dust and corrosive gases Every month Every three months

16.1 Maintenance of circuit breaker

16.1.1 Foreign objects (such as tools, wire leads or fragments, metal
objects) in the switchgear should be regularly cleared.
16.1.2 The dust on the circuit breaker must be regularly cleared to
maintain its good insulation.
16.1.3 The spring washers of the main circuit connecting bolts，
the earthing bolts must be checked for whether they are
flattened and theconnection is firm.

16.1.4 Whether the opening or closing indication is correct and

reliable.

Opening charging Closing charging

OFF ON OFF ON

ON
OFF Charged
Charged

Opening discharging Closing discharging

OFF ON OFF ON

OFF ON
Discharged Discharged
NA1 Air Circuit Breaker P-056

16.2 Overhaul of circuit breaker

16.2.1 Connecting and mounting inspection

It is proposed to refer to the following requirement for the torsional forces of main circuit and secondary circuit.

Fastener specification Torque requirement N·m

M3 0.5~0.7
M4 1.2~1.7
M8 16~26
M10 36~52
M12 61~94

16.2.2 Insulating property test

The phase-phase and phase-earth insulation resistance, requirement≥20MΩ.
The insulation resistance test must be first done after overhaul and long-time（≥7days）of deenergization and before energization
again.
16.2.3 Operating characteristic inspection
All accessories shall be connected with corresponding rated voltage according to the face shield nameplate requirement, and the
following operations should be done:
Electric charging, closing and opening operation, 5times in cycle
Manual charging, closing and opening operation, 5times in cycle
The circuit breaker charging, opening and closing should be normal.
Note: The main circuit must be uncharged. If there is an under-voltage release, the rated voltage must be first connected.

Note: The picture takes NA1-2000X as an example

P-057 Air Circuit Breaker NA1

16.2.4 Inspection of circuit breaker components

16.2.4.1 Face shield dismantling

· Remove four bolts of circuit breaker fixed panel and take off the face shield.

Note: The picture takes NA1-2000X as an example.

16.2.4.2 Operating mechanism inspection

The mechanism components should be free of fracture and damage, and the fasteners are fastened.
Clear the dust and evenly apply oil onto the rotating components.

· Evenly apply 7012 low-temperature lubricating grease or lubricate same using

the similar solid grease onto the mechanism rotating positions.

Note: The picture takes NA1-2000X as an example.

16.2.4.3 Intelligent controller (taking NA1-2000 type M type controller as an example)

Parameter setting should conform to the site use requirement.

· 1. Press the “Set” button to enter the parameter setting interface “Pro”.
· 2. Press the “Enter” button to enter the protective parameter setting and
query interface.
· 3. Press the “▲” or “▼” button to in turn select the display of protective
parameter setting details.
· 4. Press the “Reset” button to return to the upper-level menu or exit from
the interface.

Simulated test tripping function

NA1 Air Circuit Breaker P-058

· Press the “Test” button to simulate the tripping test.

· Press the orange “Reset” button on the face shield to return to normal state.

16.2.4.4 Drawer set inspection (conduct the test after removing the body, taking NA1-2000X as an example)
There are no foreign objects inside.

· Observe whether there are foreign objects inside the draw-out socket, like
screws, wire leads, scrap iron; please clear same if any.
P-059 Air Circuit Breaker NA1

The flash barrier opening or closing is normal, and the spacing contact has no deformation or oxidization.

· Rotate to the · Rotate NA1-2000X~6300X to

“Disconnected” position, the Connected position.
and the flash barrier is · Press down NA1-1000X
shown as the left figure. separator and open the
connecting rod. The flash
barrier is shown as the left
figure. Observe whether each
phase bridge contacts are
deformed, misplaced or
oxidized. If any, replace same.
“Disconnected” “Connected”

Rotate the friction positions and apply oil evenly.

· Evenly apply 7012 low-temperature

lubricating grease or similar solid
grease onto the positions indicated
in the left figure.

16.2.4.5 Arcing Chamber (taking NA1-2000X~6300X as an example)

Each arc and arcing chambers are not broken. If any, please promptly replace same and clear inside dust, corrosion layer and arc
discharge point. In case of serious corrosion or rust, please promptly conduct replacement.

Note: Inspection must be done after short-circuit current breaking.

· Remove the fixing bolts · Take out the arc chamber. · Check chamber conditions.
NA1 Air Circuit Breaker P-060

16.2.4.6 Required main contact (taking NA1-2000X~6300X as an example) over-travel≥2mm.

· Conduct manual closing operation, and observe the main contact over-travel.
Note: Please replace the contact if it reaches the position shown.

Clear dust, corrosion layer and particle burnt objects.

· Close the product and main contact is at the shown position. Observe any dust,
particle burnt objects and oxidized corrosion layer of dynamic and static
contacts. If any, please promptly clear same.

Note: Inspection must be done after short-circuit current breaking.

16.2.4.7 Secondary circuit inspection

No shell damage.
Inspect the contact between the draw-out body secondary
circuitand drawer set secondary circuit using the multimeter.
At the “Test” or “Connection” position, the contacts are
in good contact , and the connecting screws are fastened ,
and the conductor insulation has no damage.

16.3 Replacement of undervoltage release, shunt release and

closed electromagnet accessories.The following operations
must be executed before replacing the accessories.
Cut off all power supplies and ensure the main circuit and
secondary circuit power supplies are uncharged. The
circuit breakers are in the discharging opening state.
16.3.1 Replacement of fixed accessories
Remove the panel fixing bolts and dismantle the panel.
Untie the tape and remove the connecting conductor.
Remove the fixed accessory mounting screws.
Dismantle the accessories and replace same.

Note: The shunt release should be first dismantled before replacing the NA1-2000
undervoltage release.
P-061 Air Circuit Breaker NA1

16.3.2 Replacement of draw-out accessories

Rotate the body to the detachment position and remove the
body.
Remove the panel fixing bolts and dismantle the panel.
Untie the tape and remove the connecting conductor.
Remove the fixed accessory mounting screws.
Dismantle the accessories and replace same.

Note: The shunt release should be first dismantled before replacing the NA1-2000
undervoltage release.

17. Common Failure Causes and Solutions

17.1 Troubleshooting logic

Begin

Circuit breaker Circuit breaker

opening failure closing failure

Manual opening Shunt release UVT opening Drawer set is The controller
Energy-storage
opening failure failure rotated in position is reset or not
failure or not or not

Inspect the Inspect the Inspect the Inspect the The drawer set is The controller reset
mechanism shnnt release UVT moto rotated in position button is reset

Maintain the UVT

attracting and mannal
opening operation

Inspect items:

1、The connection line is normnal or nor. Inspect the

The shunt
interlocking Opening or not
2、The connection voltage conforms to the release is charged
or not
device

requirement or not.

3、The components are damaged or not. Inspect the Inspect the UVT
Inspect the
shunt release and closed
please replace the damaged components mechanism
commection electromagnet
NA1 Air Circuit Breaker P-062

17.2 Faulty tripping analysis (taking NA1-2000X M as an example)

Failure cause identification
The failures are identified through the intelligent controller
indication..

· Presss the “Reset” button till · Press the “Check” button to

it returns to the default display enter the query menu interface;
interface. Press the “Enter” button to
enter the failure query menu
interface; press the “▼” and
select the failure record frequency
to be viewed, and press the
“Enter” button again to query
the failure details.

· Presss the “Reset” button to

exit from or return to the
upper-level menu.

Note: The electrical closing operation is forbidden before troubleshooting.

P-063 Air Circuit Breaker NA1

18. Regular malfunction and solutions

Fault description Reasons analysis Maintenance method

1. Check the breaking current value and operation time of intelligent release.
Over load tripping 2. Analyze the load and electric network, exclude the overload if it happens.
(Ir indicator flashing) 3. Match the actual operating current with long time-delay current setting value.
4. Press the reset button to reclose the breaker

1. Check the breaking current value and operation time of intelligent release.
2. Exclude the short circuit fault if it happens
Short circuit tripping
3. Check the setting value of intelligent release
(“Isd”or“Ii”indicator flashing)
4. Check the normal state of breaker
Tripping of 5. Press the reset button to reclose the breaker
circuit breaker
1. Check the breaking current value and acting time of intelligent release.
Earthing fault tripping 2. Exclude the earthing fault if that happens.
(IG indicator flashing) 3. Match the fault current setting value with the actual protection.
4. Press the reset button to reclose the breaker.

Under-voltage release fault: 1.Check the power is on or not

1. Rated working voltage is 2.Check the power voltage of under-voltage release, it shouldn't be less
less than 70%Ue than 85%Ue.
2. Fault of control unit 3.Replace the control unit of under-voltage release

Mechanical interlock acting Check the working state of two circuit breakers fixed with mechanical interlock

Intelligent release don't reset

Press the reset button to reclose the breaker
(panel is raised)
The breaker
Secondary circuit of drawerout- Make the breaker to "making" position
can't be
type breaker isn't connected ("click" sound will be heard)
closed

Check the secondary circuit:

Breaker hasn't stored energy 1. Power voltage of motor shouldn't less than 85%Ue.
2. Check the storage mechanism, replace it if necessary.

Mechanical interlock acting Check the working state of two circuit breakers
leads to locking of breaker fixed with mechanical interlock
The breaker Closing electromagnet:
can't be 1.Rated control voltage is 1. Power voltage of closing electromagnet
closed less than 85%Us; shouldn't less than 85%Us.
2.Closing electromagnet 2. Replace the electromagnet.
is damaged

Tripping immediately: 1. Check the breaking current value and operation time of intelligent release;
Tripping after
1. Short circuit current is closed 2. Exclude the short circuit fault if it happens;
closing the
2.Delay tripping because of 3. Exclude overload fault
circuit breaker
transient current is high 4. Check the normal state of breaker
(Fault indicator
when closing; 5. Modify the current setting value of intelligent release
flashing)
3. Overload current is closed 6. Press the reset button to reclose the breaker

The breaker can't be opened manually

1. There is fault with mechanical 1. Check the mechanism, if there is fault happened.
operating mechanism

Circuit breaker The breaker can't be opened by

can't be opened motor remotely
1. Check the mechanism, if there is fault happened.
1. There is fault with mechanical
2. Check the Power voltage of shunt release is less
operating mechanism
than 70%Us or not
2. Power voltage of shunt
3. Replace shunt release
release is less than 70%Us;
3. Shunt release is damaged
NA1 Air Circuit Breaker P-064

Fault description Reasons analysis Maintenance method

Manual storage can't be realized Mechanical fault with the energy-storage device

Circuit breaker Motor storage can't be realized

can't store energy 1. Power voltage of motor 1. Power voltage of motor energy-stored device shouldn't less
energy-stored device is less than 85%Us; than 85%Us
2. There is mechanical fault 2. Mechanical fault with the energy-storage device
with energy-storage device

Handle of drawerout- 1. There is padlock at the "opening" position

1. Take away the padlock
type circuit breaker 2. Slideway or breaker body
2. Pull the slideway or breaker body into its position
can't be drawn in or out isn't pulled into its position

Drawerout-type
1. Handle isn't pulled out
breaker can't be drawn 1. Pull out the handle
2. Breaker is not totally at the
out at the "opening" 2. Keep the circuit breaker totally at “opening” position
“opening" position
position

1. Something drop into the drawer base,

Drawerout-type breaker and lock the mechanism or mechanism
1. Check and clean the drawer base, or contact with manufacturer
can't reach the fault happens.
2. Match the body with relevant drawer base
"making" position 2. Breaker body not match with the frame
-size rated current of drawer base

1. Release isn't connected 1. Check the power is connected or not

with power 2. Cut off the power, then connect again. Otherwise contact
No display on
2. There is fault with release with manufacturer
intelligent release
panel
Check the electromagnet power voltage shouldn't be less
Rated control voltage is less than 85%Us;
than 85%Us.

Fault indicator still

Fault happened with Cut off the power, then connect again. Otherwise contact
flashing after pressing
intelligent release with manufacturer
the Reset button
P-065 Air Circuit Breaker NA1

NA1-1000X~6300X Ordering specification

Customer: Tel: Date:
Quantity:
Model □NA1-1000X □NA1-2000X □NA1-2000XN □NA1-2000XH □NA1-3200X □NA1-3200XN NA1-4000X □NA1-6300X □NA1-6300XN
□200 □400 □630 □630 □800 □1000 □2000 □2500 □4000 □5000
Rated current In (A) □4000
□800 □1000 □1250 □1600 □2000 □3200 □6300(no four poles)

Installation mode □ Drawout type □Fixed type (Note: no fixed type when In> 4000A)
Number of poles □ Three poles □Four poles

Protection function Auxiliary functions Optional function

□ M type 1. □ Ir overload long delay, Isd short-circuit short delay inverse

time + definite time, Ii transient short-circuit, Ig single-phase
Standard
grounding 4-section protection 1. Ammeter
(Default 2. □ Ir overload long delay, Isd definite time short-circuit short function
configuration) delay,Ii transient short-circuit, Ig single-phase grounding 4-section 2. Self-diagnostic
protection function
3. Tuning function
1. □ Ir overload long delay, Isd short-circuit short delay inverse 4. Test function □ Voltage display
□ 3M type time + definite time, Ii transient short-circuit, Ig single-phase 5 Display function □ Frequency display
Multifunctional grounding 4-section protection
□ Power Factor show
2. □ Ir overload long delay, Isd definite time short-circuit short
(Optional □ Active power display
delay,Ii transient short-circuit, Ig single-phase grounding 4-section
configuration) protection □ Load monitoring
function
1. □ Ir overload long delay Isd short-circuit short delay inverse time Note: For the specific
Intelligent Controller

+definite time Ii transient short-circuit, Ig single-phase grounding

optional function, refer
□ 3H-type 4-section protection
2. □ Ir overload long delay, Isd definite time short-circuit short delay, to List of controller
Communication
Ii transient short-circuit, Ig single-phase grounding 4-section protection functions in the sample
type
3. □ with PROFIBUS-DP communication protocol (The cost of optional
(Optional □ with MODBUS communication protocol
functions will be
configuration)
calculated additionally).

Ir long delay current setting range: (0.4 to 1) In ! Conventional factory tuning: overload long delay 1.0In
Overload 1.5Ir action time setting range: 15,30,60 ...... 480s ! Conventional factory tuning: overload 1.5Ir; action 15s

Notes: ! Conventional factory setting: short delay current 8Ir ;

Protection Isd short delay current setting range: (1.5 to 15) Ir;
! Conventional factory tuning: Short delay action time 0.4s
function short delay action time (0.1 ~ 0.4) s
[Note: 3M, 3H for (1.5 to 15) Ir]
Settable
range and Ii instantaneous current setting range: 1.5In ~ 50kA/65kA/75kA
conventional
! Conventional factory tuning: 12In [Note: 3M, 3H for （1.5In~50kA/65kA/75kA）
factory tuning
Ig earthing protection current setting range: (0.2 to 0.8) In; the earthing protection time setting range: (0.1to0.4)s
! Conventional factory setting: 0.5 In; OFF
Controller power □AC380V,□AC400V,□AC220V,□AC230V,□AC127V,□DC220V,□DC110V (Optional)
Undervoltage □AC380V,□AC400V,□AC220V,□AC230V,□AC127V,□Order_____V ,□Non-undervoltage (Optional)
Electrical accessories

release (default
configuration) □ Instantaneous □ delay, s; □ Resistance capacity loss release delay (1,3,5) s, and optional non-adjustable (Optional)

Shunt release □AC380V,□AC400V,□AC220V,□AC230V,□AC127V,□DC220V,□DC110V (Optional)

Closing electromagnet □AC380V,□AC400V,□AC220V,□AC230V,□AC127V,□DC220V,□DC110V (Optional)

Electric motor □AC380V,□AC400V,□AC220V,□AC230V,□AC127V,□DC220V,□DC110V (Optional)

Interlock device Mechanical linkage: □ Link interlock □ Cable interlock

(Optional)
(surcharge) Door interlock: □ Switch body position door interlock(drawer-type) □ Switch on/off state door interlock

Button lock: □Panel products on/off button lock

Key lock: □1 lock 1 key □2 locks 1 key □3 locks 1 key □ 3 locks 2 keys □5 locks 3 keys □Special custom__lock__ key
Special requirements

Accessories External transformer: □External N phase transformer [(3P+N)T type

(surcharge) (Optional)
□External leakage zero sequence current transformer (E mode) □External ground current transformer (W)

Module: □ PSU-1 Power module □RU-1 relay module □ST-DP protocol converting module

□Position signaling devices (□Connected □Test □Unconnected) □Mechanical counting device

□Horizontal connection (default) □Vertical connection (with L vertical bus-bar)

The main circuit
connection □Rotation busbar horizontal connection (Drawer In ≤ 3200)
(Optional)
□Rotation busbar vertical connection (drawer-type In ≤ 3200)

Note: The casing current, rated current and auxiliary control voltage must be specified when ordering!
Note: 1) Please mark “√” or fill figure in the relative ”□” if no mark, we will provide according to conventional.
Note: 2) The operational fuction of the intellgent controller and special requirements require additional costs.
Tel.:0577-62877777-6213 Fax :0577-62877777-6288

NA1-6300X NA1-4000X NA1-3200X NA1-2000X NA1-1000X

NA1 Air Circuit Breaker P-066

Configuration instructions

1. NA1-2000X~6300X fundamental configurations 2. NA1-1000X fundamental configurations

a. Motor-driven: a. Motor-driven:
Under-voltage instantaneous release; Under-voltage instantaneous release;
Shunt release; Shunt release;
Closing electromagnet; Closing electromagnet;
4 suits of transform contact; Motor driven operating mechanism;
Motor driven operating mechanism; 4 normal open and 4 normal close auxiliary
M-type Intelligent Controller; contacts;
Horizontal wiring of main circuit; M-type Intelligent Controller;
Doorcase; Closing and breaking push button lock;
Element of main circuit; Horizontal wiring of main circuit;
Operating instructions of M-type Intelligent Controller Doorcase;
Operating instructions of Air Circuit Breaker; Element of main circuit;
Packing box; Operating instructions of Air Circuit Breaker;
Drawer seat (Drawout type) Packing box;
Drawer seat(Drawout type)

b. Manual: b. Manual:
Under-voltage instantaneous release; Under-voltage instantaneous release;
4 suits of transform contact; 4 normal open and 4 normal close auxiliary
M-type Intelligent Controller; contacts;
Horizontal wiring of main circuit; M-type Intelligent Controller;
Doorcase; Horizontal wiring of main circuit;
Element of main circuit; Closing and breaking push button lock;
Operating instructions of M-type Intelligent Doorcase;
Controller Element of main circuit;
Operating instructions of Air Circuit Breaker; Operating instructions of Air Circuit Breaker;
Packing box; Packing box;
Drawer seat(Drawout type) Drawer seat(Drawout type)
4. NA1-1000X operational configuration (additional
3. NA1-2000X~6300X operational configuration
costs)
(additional costs)
Under voltage delayed release; wire-cable
Nonadjustable under voltage delayed release (1s, 3s, 5s);
mechanical interlock;
Connecting-rod type mechanical interlock (for drawout
key lock; External current transformer earthing
type);
protection;
Wire-cable mechanical interlock; Button lock; Key lock;
Vertical busbar; 6 groups changeover contacts;
Door interlock'Locking device;
H type intelligent controller; Phases barrier, position
External current transformer earthing protection;
signal
Vertical busbar;
Rotating busbar (IN≤3200);
3NO (normal open) and 3NC (normal close) contacts;
4NO and 4NC contacts; 5 groups changeover contacts;
3 groups changeover contacts; H type intelligent
controller;
Position signal; Counter; Protecting cover (NA1-2000);
Double power controller.

NXA Catalog en
No ratings yet
NXA Catalog en
69 pages
NX9-Fish Bone Type Distribution Box-Catalog
No ratings yet
NX9-Fish Bone Type Distribution Box-Catalog
13 pages
CHINT Solar Street Lights Solution
No ratings yet
CHINT Solar Street Lights Solution
11 pages
Smart Charger AC Wallbox by CHINT
No ratings yet
Smart Charger AC Wallbox by CHINT
10 pages
CHINT Group Catalogue
No ratings yet
CHINT Group Catalogue
18 pages
Bang Gia Thiet Bi Dien Chint
No ratings yet
Bang Gia Thiet Bi Dien Chint
76 pages
General Catalouge
No ratings yet
General Catalouge
18 pages
Europe Air Circuit Breaker Overview
No ratings yet
Europe Air Circuit Breaker Overview
63 pages
Fan Louver Thermostate and Space Heater
No ratings yet
Fan Louver Thermostate and Space Heater
9 pages
Automatic Transfer Switching Equipment Guide
No ratings yet
Automatic Transfer Switching Equipment Guide
19 pages
Chint Ats
No ratings yet
Chint Ats
36 pages
2024.09.01 C2-Na8-Acb
No ratings yet
2024.09.01 C2-Na8-Acb
87 pages
Chint Fichas Tecnicas Inversores
No ratings yet
Chint Fichas Tecnicas Inversores
14 pages
Catalogue NG7-40.5 20241015
No ratings yet
Catalogue NG7-40.5 20241015
20 pages
2023 NM8N MCCB Catalog
No ratings yet
2023 NM8N MCCB Catalog
98 pages
PriceList-2021 CHINT-India LR
No ratings yet
PriceList-2021 CHINT-India LR
108 pages
Global Electrical Solutions Leader
0% (1)
Global Electrical Solutions Leader
18 pages
Na1-3200x Chint Air Circuit Breaker - 060758
No ratings yet
Na1-3200x Chint Air Circuit Breaker - 060758
62 pages
CHINT Low Voltage Product Catalogue
No ratings yet
CHINT Low Voltage Product Catalogue
144 pages
Chint - China
No ratings yet
Chint - China
116 pages
Inversor Gerador Solar Chint Power
No ratings yet
Inversor Gerador Solar Chint Power
20 pages
CHINT Smart Energy & Low-Voltage Solutions
No ratings yet
CHINT Smart Energy & Low-Voltage Solutions
98 pages
CHINT Low-Voltage Solutions Overview
No ratings yet
CHINT Low-Voltage Solutions Overview
77 pages
Chint T&D PPT 2017
No ratings yet
Chint T&D PPT 2017
38 pages
NVF5
No ratings yet
NVF5
16 pages
Chint Power Systems Inverter Overview
No ratings yet
Chint Power Systems Inverter Overview
18 pages
Effort For Excellence Engineering
No ratings yet
Effort For Excellence Engineering
8 pages
NA1 ACB Catalog - 2022 - en
No ratings yet
NA1 ACB Catalog - 2022 - en
76 pages
1.1 General Catalog English
No ratings yet
1.1 General Catalog English
44 pages
Envicool Energy Storage Cooling Solution
No ratings yet
Envicool Energy Storage Cooling Solution
8 pages
Nm8n HV 800vac
No ratings yet
Nm8n HV 800vac
30 pages
CHINT: Global Smart Energy Solutions Leader
No ratings yet
CHINT: Global Smart Energy Solutions Leader
78 pages
NM8N Moulded Case Circuit Breakers
No ratings yet
NM8N Moulded Case Circuit Breakers
98 pages
NM8N Catalog 2024-EN
No ratings yet
NM8N Catalog 2024-EN
96 pages
Catalog Circuit Breaker
No ratings yet
Catalog Circuit Breaker
27 pages
HPAC Engineering - October2019 PDF
No ratings yet
HPAC Engineering - October2019 PDF
38 pages
SchneiTec CHINT Introduction - 20220311 (Henry)
No ratings yet
SchneiTec CHINT Introduction - 20220311 (Henry)
28 pages
CHINT Busbar+Trunking+System
No ratings yet
CHINT Busbar+Trunking+System
24 pages
NM8N-HV Series Catalog EN 202206
No ratings yet
NM8N-HV Series Catalog EN 202206
26 pages
CHiNT - MVLV Switchgear
100% (2)
CHiNT - MVLV Switchgear
76 pages
Core vs. Shell Type Transformers
No ratings yet
Core vs. Shell Type Transformers
32 pages
Dry-Type Transformer Catalog
No ratings yet
Dry-Type Transformer Catalog
32 pages
nVent Electric: Innovative Electrical Solutions
No ratings yet
nVent Electric: Innovative Electrical Solutions
63 pages
VPF Motorized Dynamic Balancing Valve FCU Product Bulletin
No ratings yet
VPF Motorized Dynamic Balancing Valve FCU Product Bulletin
6 pages
T66340 EN Catalog 2012 1207-New
No ratings yet
T66340 EN Catalog 2012 1207-New
6 pages
LV Ped 208008 en
No ratings yet
LV Ped 208008 en
226 pages
CHiNT - Current Transformer & Potential Transformer
No ratings yet
CHiNT - Current Transformer & Potential Transformer
119 pages
38aks016 Carrier
100% (1)
38aks016 Carrier
138 pages
Envicool X Series Data Center Modular Solution
No ratings yet
Envicool X Series Data Center Modular Solution
16 pages
Am Tech Profile
No ratings yet
Am Tech Profile
17 pages
CHINT: Leading Low-Voltage Electric Manufacturer
No ratings yet
CHINT: Leading Low-Voltage Electric Manufacturer
67 pages
2 - CET Electric Technology Inc. - 202407
No ratings yet
2 - CET Electric Technology Inc. - 202407
41 pages
(IOM) Sc1901wwa
No ratings yet
(IOM) Sc1901wwa
52 pages
19XR 3PD PDF
No ratings yet
19XR 3PD PDF
64 pages
Carrier 19xr Product Data
No ratings yet
Carrier 19xr Product Data
64 pages
Building N Automation
No ratings yet
Building N Automation
56 pages
Characteristics
100% (1)
Characteristics
6 pages
Oracle HCM & Taleo Consultant Profile
No ratings yet
Oracle HCM & Taleo Consultant Profile
5 pages
Employing Internet of Things IoT Devices For Monit
No ratings yet
Employing Internet of Things IoT Devices For Monit
8 pages
Exp 5 ANEKA Cloud Platform Study
No ratings yet
Exp 5 ANEKA Cloud Platform Study
10 pages
JD - Software Intern
No ratings yet
JD - Software Intern
2 pages
IBM - IBM Spectrum Scale Version 5.1.0 Erasure Code Edition Guide (2021)
No ratings yet
IBM - IBM Spectrum Scale Version 5.1.0 Erasure Code Edition Guide (2021)
134 pages
Shoot Space
No ratings yet
Shoot Space
21 pages
Amazon Elastic Compute Cloud: Getting Started Guide API Version 2010-06-15
No ratings yet
Amazon Elastic Compute Cloud: Getting Started Guide API Version 2010-06-15
27 pages
D80182GC10 Les01
No ratings yet
D80182GC10 Les01
16 pages
1z0-1127-25 Exam Dumps
100% (1)
1z0-1127-25 Exam Dumps
6 pages
Symantec Endpoint Protection 15: at A Glance
100% (1)
Symantec Endpoint Protection 15: at A Glance
6 pages
Mobile App Code Generation Guide
No ratings yet
Mobile App Code Generation Guide
18 pages
Salesforce Developer Expertise
No ratings yet
Salesforce Developer Expertise
4 pages
AWS Materials
No ratings yet
AWS Materials
228 pages
AI Club Hackathon Problem Statements
No ratings yet
AI Club Hackathon Problem Statements
26 pages
Dhananjay Vadane Updated APR 2025
No ratings yet
Dhananjay Vadane Updated APR 2025
2 pages
An Efficient Public Key Secure Scheme For Cloud and IoT Security
No ratings yet
An Efficient Public Key Secure Scheme For Cloud and IoT Security
10 pages
Guidewire Implementation and Testing Services
No ratings yet
Guidewire Implementation and Testing Services
12 pages
2 November 2024 Ijercse
No ratings yet
2 November 2024 Ijercse
7 pages
Analysis of Cloud Computing in Open Source Platform
No ratings yet
Analysis of Cloud Computing in Open Source Platform
8 pages
Data Science For Modern Manufacturing
No ratings yet
Data Science For Modern Manufacturing
36 pages
AWS Architecture Course for Beginners
No ratings yet
AWS Architecture Course for Beginners
734 pages
C - CPI - 2506 Real Exam Questions Help You Study - Testpassport
No ratings yet
C - CPI - 2506 Real Exam Questions Help You Study - Testpassport
6 pages
Salesforce Basics
100% (1)
Salesforce Basics
220 pages
Relativity Fact Sheet
No ratings yet
Relativity Fact Sheet
14 pages
New Mea Connexus Full Brochure v2
No ratings yet
New Mea Connexus Full Brochure v2
8 pages
Enhancing Library Services The Progression From Op
No ratings yet
Enhancing Library Services The Progression From Op
14 pages
Horizon - Security - 2025 01 22 17 05 10
No ratings yet
Horizon - Security - 2025 01 22 17 05 10
99 pages
Sriniv
No ratings yet
Sriniv
5 pages
Revionics - White.paper. (Software As A Service A Retailers)
No ratings yet
Revionics - White.paper. (Software As A Service A Retailers)
7 pages