Scribd
Upload
98 views1 page

Ring Beam Layout

Uploaded by

Kim Pius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views1 page

Ring Beam Layout

Uploaded by

Kim Pius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NOTES

1. FOUNDATIONS
They shall generally be taken 1500mm
min. below existing ground level after
removal of organic layer and all
excavations to be confirmed by the
Engineer before concrete blinding is
laid.
Weak pockets of bearing strata to be
dug out and filled with 1:4:8 mass
concrete.

2. CONCRETE MIXES
Reinforced concrete to have a min.
works cube strength of 25N/mm² at
28 days with 20mm max.aggregate size

3. REINFORCEMENT
(a) High yield bars (>500N/mm²) to be
square twisted cold formed bars to
BS4461and are marked "H" on these
dwgs
(b) Mild steel bars (250N/mm²) marked "R"
on these dwgs to be round bars to
BS4483

4. MINIMUM COVER TO ALL STEEL IN


(a) Foundations = 50mm
(b) Beams = 30mm
(c) Columns = 30mm
(d) Ground slab= 30mm

5. ABBREVIATIONS
M.C = Mass Concrete
R.C = Reinforced Concrete
T = Top
B = Bottom
6. Minimum Laps are
H8 - 400mm H16 - 800mm
H10 - 500mm H20 - 1000mm
H12 - 600mm H25 - 1250mm
All dimensions to be confirmed on site.
This drawing must be read in conjunction
with the relevant architectural drawings.

REVISIONS

No. Date: Descriptions:

CLIENT:

GAREEBA ESTHER

PROJECT TITLE:
PROPOSED RESIDENTIAL DEVELOPMENT
TO BUILT ON
PLOT NO......, KAMURASI KIKWANANA
WARD,
NYANGHAYA DIVISION , MASINDI
MUNICIPALITY
ARCHITECT: CIVIL/STRUCTURAL
ENGINEER

DRAWING DESCRIPTION:
FOUNDATION LAYOUT
COLUMN, STAIRCASE
&
BEAM DETAILS
ENGINEER'S SEAL: DRAWN BY: CHECKED BY:

B.S.E

APPROVED BY:

SCALE AS INDICATED

DATE NOV 2024


DWG No.

RING BEAM LAYOUT DESIGNED BY: ISSUED TYPE:

SCALE 1:100 B.S.E PAPER: SHEET No. REV

A1 01/02 00

You might also like