TECHNICAL REPORT (MANUAL) No. TMN13/ g§3 E 2013 General Manager of CNC software Laboratory hea FANUC Series 35i- MODEL B / Power Motion i- MODEL A Full-size character of Software operator's panel general-purpose switches 4. Communicate this report to: (f necessary of adaldelete’medty, adaidelete/modit for below) . ni FANUC sales division v_|_ Overseas Group Companies (FA) (Overseas Group Companies (Robot) ie Machine tool builder Sales agency End user 2. Summary 3. Notice Available software series: 601, G611_ / 12.0 or later 88HO 170 or later 4, Attached Document: Export Control C Controlled (Related item No. of Foreign Exchange Order Attachment List of Japan: 1 Non-controlled for iter No. 2 to 15 of Foreign Exchange Order Attachment List of Japan Drawing | B-64523EN-1/01- !7, B-64573EN-I/ol-11(1/1y ¥ 1/1) B-64530EN/01-09, B-64580EN/01-02 (1/11~11/11) NO. FLBA-13/ 7031 Date 4. 2013 Acceptance (Technical Administration Dept.) Original section of issuer of issue Section Person in Vice General] Depariment | Section] Pewonin Manager Manager a Charge Manager Manager Manager Charge FeaFANUC Series 357-B / Power Motion i-A Full-size character of Software operator's panel general-purpose switches 1. Type of applied techr | documents Name FANUC Series 35/-MODEL B CONNECTION MANUAL (FUNCTION) Spec.No.Version | B-64523EN-1/01 Name FANUC Power Motion i-MODEL A CONNECTION MANUAL (FUNCTION) Spec.NoVersion | B-64573EN-1/01 2, Summary of change by this function. Group Name / Outline New, | Applicable ‘Add, Date Correct, Delete Basic Function Optional | The full-size character can be specified in the name of Function | the software operator's panel general-purpose switches Add | Immediately Unit Maintenance parts Notice Correction ‘Another FANUC Series 357-B/Power Motion 7-A Tie [Full-size character of Software operator's anel general-purpose switches. Draw No. [ED| Date [Design Description, FANUC Corporation Date] 04. Julz013 B-64523EN-1/01-17, B-64573EN-1/01-11 sheet | 1/11ggeeseeee2 Half-size character code list [chara] ter Code [chara tet [Chara] Code [Chara] Code [ohara] ctet eter ter 65 81 | 44 -78 66 82 - | 45 “1 87 83 - | 46 -76 68 84 4 215 68 85 : | 58 -14 70 86 |! + | 59 -23 u 87 60 -2 12 88 61 ul 73 89 82 -10 14 80 63 -69 5 48 64 | » | -88 6 48 a1 -67 1 50 2 | _e | -06 8 5 93 -65 19 52 95 -64 80 53 -18 -63 NOTE ‘The dakuten ( *)(voiced sound mark), the han-dakuten( * semi-voiced sound mark) in Japanese katakana are counted as one FANUC Series 357-B/Power Motion 7-A [Full-size character of Software operator's} panel general-purpose switches "| B-64523EN-1/01-17, B-64573EN-1/01-11 FANUC Corporation Ja] 2 |[FANUC Series 35 i -MODEL B CONNECTION MANUAL (FUNCTION\B'64523EN-D 1 Please add the following parameter to "Parameter" in "13.1.2 Software Operator's Panel". [RANUC Power Motion i-MODEL A CONNECTION MANUAL (FUNCTION) (B-64573EN-1) ] Please add the following parameter to "Parameter" in "12.1.2 Software Operator's Panel’. 7201 [Input type] Parameter input [Data type} Bit path #0 SPC To the name of a general-purpose switch on the software operators panel, the fullsize character such as Chinese character 0: can not be set. 1: canbe se [FANUC Series 35 /-MODEL B CONNECTION MANUAL (FUNCTION)(B-64523EN-1) | Please change the explanation of "Parameter" in "13.1.2 Software Operator's Panel", as follows. [FANUC Power Motion i- MODEL A CONNECTION MANUAL (FUNCTION) (B-64573EN-1) | Please change the explanation of "Parameter" in "12.1.2 Software Operator's Panel", as follows. ‘Name of gonoral-purpose switch 1 on software operator's panol (Ist half-size charactor) ‘Name of general-purpose switch 1 on software operator's panel (2nd half-size character) ‘Name of general-purpose switch 1 on software operators panel (3rd half-size charactor) Name of general-purpose switch 1 on software operator's panel (ath half-size character) ‘Namo of general-purpose switch 1 on software operators panel (Sth half-size character) Name of general-purpose switch 1 on software operator's panel (6th half-size character) Name of general-purpose switch 1 on software operator's panel (7th halfize character) (th half-size charecter) ‘Name of general-purpose switch 2 on software operator's panel (Ist half-size character) © ‘Name of general-purpose switch 8 on software operator's panel (@th half-size character) ‘Name of general-purpose switch 9 on sofware operator's panol (1st half-size character) © ‘Name of general-purpose switch 10 on software operator's panel (8th half-aize charactor) ‘Namo of general-purpose switch 11 on software operator's panel (Tet half-size character) © ‘Name of general-purpose switch 16 on software operator's panel (@th hallaize charactor) FANUC Series 357-B/Power Motion 1-A{input type]. Parameter input {Datatype} Byte path {Valid data range) -128 0 127 Each of these parameters sets the name of a general-purpose switch on the software operater’s panel with the following character codes. ‘When bit 0 (UPC) of parameter No. 7201 is set t0 0, the character codes in the “Half-size character code list” can be specified ‘When bit 0 GPC) of parameter No, 7201 is set to 1, the character codes in the “Half-size character code list” and the “Fullsize character code list (a) to 1)" can be specified. The full-size character which uses two characters ofthe half-size can be specified by the high-code and the low-code. ‘A switch name consists of up to ight half-size characters (or four fll-size characters) Parameters Nos. 7220 to 7227 : Name of general-purpose switch 1 Parameters Nos. 7228 to 7235 : Name of general-purpose switch 2 Parameters Nos. 7236 to 7243 : Name of general-purpose switch 3 Parameters Nos. 7244 to 7251 : Name of general-purpose switch 4 Parameters Nos. 7252 to 7259 : Name of general-purpose switch 5 Parameters Nos. 7260 to 7267 : Name of general-purpose switch 6 Parameters Nos. 7268 to 7275 : Name of general-purpose switch 7 Parameters Nos. 7276 to 7283 : Name of general-purpose switch 8 Parameters Nos. 7284 to 7291 : Name of general-purpose switch 9 Parameters Nos. 7292 to 7299 : Name of general-purpose switch 10 Parameters Nos. 7352 to 7359 : Name of general-purpose switch 11 Parameters Nos. 7360 to 7367 : Name of general-purpose switch 12 Parameters Nos. 7368 to 7375 : Name of general-purpose switch 13 Parameters Nos. 7376 to 7383 : Name of general-purpose switch 14 Parameters Nos. 7384 to 7391 : Name of general-purpose switch 15 Parameters Nos. 7392 to 7399 : Name of general-purpose switch 16 Ex) Setting ofthe name of general-purpose switch 1 on the software operator's pane! ‘The name of general-purpose switch I on the software operator's panel can be set 10 “OVRI451”, inthe following setting ofthe parameters Nos. 7220 to 7227. (When bit 0 (PC) of parameter No. 7201 is set to 1) Parameter | Setting value (Character 7220 79 ° 7224 86 v 7222 2 R 7233 4 a 7224 # 7 7225 2 726, “32 = 7227 ra 7 FANUC Series 357-B/Power Motion 1-A Title Full-size character of Software operator's} nel general-purpose switches. Na" | B-64523EN-1/01-17, B-64573EN-1/01-11 No. Date | Desi Description FANUC Corporation sre) 3/11 Date 04. Jul.2013 [Desig [Approve]Full-size character code list (a) Chara Code Chara’ Code. Chara Code. eter [High [tow | _cter_ [High [tow ]_cter_|~ High: a 64 2 6. 6 70 72 74 76. 78 30 82 84 26 88 90 92 34 96 8 or] w u =|3]4 e431 95] SH 21.) oe] ae Bala] S]9] 8] Taya if ulu]y fod x3 a) |e sal s4] 9] [0] 3] 0c] of fo 34 laf jedeqedaicl | a) 3] 20 4 br at a) ba al ma} na = | >I rafrsfrofasfos|rofrofrefoo|rofos]oofrofiof nf rf mfref fr frofrof nfo} a] rafrofro| nop = F i = = v c = F = = = Te 3+} FANUC Series 351-B/Power Motion 1-A Tie [Full-size character of Software operator’ anel general-purpose switches Draw No. | B-64523EN-1/01-17, B-64573EN-1/01-11 FANUC Corporation | Steet} 5/11 04, Jul 2013 [DealFull-size character code list (b) Chara Code ‘Chara Code Chara Code eter [High | Cow] cter_ [Hi Tow |_cter_| High a a 64 66 68 70 72 74 76 78 80 82 84 86 28 90 92 94 EG 38, 100 102, 104 106 408: 110 112 114 116 118] 120 122 128 126 eel le] i] 3 3 3 3 3 3 3 3 3 3 3 3 z 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 FANUC Series 351-B/Power Motion 7-A Tie |Full-size character of Software operator’ anel general-purpose switches Draw No | B-64523EN-1/01-17, B-64573EN-1/01-11 i FANUC Corporation {sree} 6/11 ‘04. Julgo13 [DesignFull-size charactor code list (c) Code Code Chara ‘Code h_|_tow || cter_[~ High 64 @ 4 66 68 70 72 74 76 78 80 82 4 6 eB 30, 32 34 96 8 ao 4} +] 102 a 39) BS] BH a) 7 Eq & L B‘Chara cter z Ud bs = a = fe) Se 4s] a) Hi Chara’ cter t of ig = | sa lee ne i Se ta Full-si Tow 64 66 68 70 72 74 76 78 80 82 84 86 88 90 92 94 96 EG character code list (d) Chara cter B 2 er Eg a) a a) a a ‘Code High 5 eh B-64523EN-1/01-17, B-64573EN-1/01-11 FANUC Corporation Jo] on |Full-size character code list (e) Code 39 wo ee ll de ado a | ‘31 $8} 8 2 |v 5 as] Ho | 9 msl) | a 2 8) SH) so] 3a fe kta) 5) ae 5a le se] at 4 of) 495) 3051 EJ Tal S e La = a i = Eg F Ba sal SIpH wa] i] $3) 5 5) Ba] | of>l-}elo1=[=]2}=) 44] =fo]>[>}=f2}=] f=] f=}2|-f ||} >f=] >} fg ya) i) ys] ob lo yl a 8 FANUC Series 35/-B/Power Motion 7-A =I 1B-64523EN-1/01-17, B-64573EN-1/01-11 FANUC Corporation Ja] onFull-size character code list (f) Chara Code ‘Chara ‘Code Chara’ Code. cter_| High | tow | _cter [tow |_cter_[ right 64 66 68 70 72 TA 76 78 80 82 84 86 88 90 92 98 6 8 4 a} |) se 3H] | A & aNOTE 11 The character can be displayed up to the character code just before the parameter Nos. 7220 to 7399 is set 10.0, in the name of a general-purpose switch on the software operator's panel. Therefore, if using the space. specify the character code “32” (the space of the half-size character). Ext) When the parameter is set fo 0 in the half-size character Parameter ‘Setting value 7220 7221 7222 7223, 7224 7225, 7226 2 7227 51 3 The character string of display : “]¢5:" x2) When the parameter is sot to 32 (the space of the hall-size character) in the half-size character Paramoter_ ‘Sotting value ‘Character 7220 3 7224 0 = 7222 3 7223 2 7224 32 7225 49 7226 50 7227 51 Ca The character sting of display : “[5) #2 123° 2 Donot specify the character codes of the blank in the “Full-size character code list’. When itis specified, the space of the fullsize character or an invalid characteris displayed. 3. Please specify two spaces of the half-size character to display a space of the full-size character. FANUG Series 357-B/Power Motion 7-A Tile |Full-size character of Software operator’ panel general-purpose switches Ea B.64523EN-1/01-17, B-64573EN-1/01-11 FANUC Corporation BEFANUC Series 357-B / Power Motion i-A Full-size character of Software operator's panel general-purpose switches 1. Type of applied technical documents Name FANUC Series 35i-MODEL B PARAMETER MANUAL Spec.No/Version | B-64530EN/01 Name FANUC Power Motion i-MODEL A PARAMETER MANUAL Spec.No/Version | B-64580EN/01 2, Summary of change Group Name / Outline Applicable Date Basic Function Optional | The full-size character can be specified in the name of Function | the software operator's panel general-purpose switches Immediately by this function. Unit Maintenance parts Notice Correction ‘Another FANUC Series 35/-B/Power Motion -A iWe [Full-size character of Software operator’ panel general-purpose switches 22] esess0enr. -09, B-64580EN/01-02 FANUC Corporation[FANUC Series 35 -MODEL B PARAMETER MANUAL (B-64530EN)] Please add the following parameter to "4.39 PARAMETERS OF SOFTWARE OPERATOR'S PANEL". UFANUC Power Motion MODEL A PARAMETER MANUAL (B-64580EN) ] Please add the following parameter to "4.35 PARAMETERS OF SOFTWARE OPERATOR'S PANEL". 720 [nput type} Parameter input [Data ype] Bit path #0 JPC To the name of a general-purpose switch on the software operator's pane! , the fullsize character such as Chinese character 0: can not be set. 1: canbe set. [FANUC Series 85 7 -MODEL B PARAMETER MANUAL (B-64530EN) ] Please change the explanation of "4.89 PARAMETERS OF SOFTWARE OPERATOR'S PANEL", as follows. ( FANUC Power Motion i-MODEL A PARAMETER MANUAL (B-64580EN) | Please change the explanation of "4.35 PARAMETERS OF SOFTWARE OPERATOR'S PANEL", as follows. ‘Name of general-purpose switch 1 on software operator's panel (Tat half-size character) Namo of general-purpose witch 1 on software operator's panel (2nd half-size character) Name of general-purpose ewitch 1 on sofware operator's panel (ard hall-elze character) ‘Name of general-purpose switch 1 on sofware operator's panel (4th hall-alze character) ‘Name of general-purpose switch 1 on software operators panel (6th half-size character) Name of general-purpose switch 1 on software operator's panel (6th half-size character) Name of general-purpose switch 1 on software operator's panel (Tih half-elze character) Name of general-purpose switch 1 on software operator's panel (6th half-size charactor) ‘Name of general-purpose switch 6 on software operators panel (@th half-size character) Name of general-purpose witch 9 on software operator’ panel (Ist haltaize character) te ame of general-purpose switch 10 on software operators panel (@th half-size charactor) panel general-purpose switches FANUC Series 351-B/Power Motion 7-A Tite [Full-size character of Software operator’ B-64530EN/01-09, B-64580EN/01-02 FANUC Corporation J] 27382 ‘Name of general-purpose switch 11 on software operator's panel (1at half-size character) to 0 7399 ‘Name of general-purpose switch 16 on software operator's panel (8th half-size character) [Input type} Parameter input [Datatype] Byte path [Valid data range] -128 to 127, Each of these parameters sets the name of a general-purpose switch on the software operator's panel with the following character codes. ‘When bit 0 (JPC) of parameter No. 7201 is st to 0, the character codes in the “Half-size character code list” can be specified ‘When bit 0 PC) of parameter No. 7201 is set to 1, the charactor codes in the “Half-size character code list™ and the “Full-size character code list (a) to ()” ean be specified. The fullsize character which uses two characters of the half-size can be specified by the high-code and the low-code. ‘A switch name consists of upto eight half-size characters (or four full-size characters) Parameters Nos. 7220 0 7227 : Name of general-purpose switch 1 Parameters Nos. 7228 to 7235 : Name of general-purpose switch 2 Parameters Nos. 7236 to 7243 : Name of general-purpose switch 3 Parameters Nos. 7244 to 7251 : Name of general-purpose switch 4 Parameters Nos, 7252 to 7259 : Name of general-purpose switch $ Parameters Nos. 7260 to 7267 : Name of general-purpose switch 6 Parameters Nos. 7268 to 7275 : Name of general-purpose switch 7 Parameters Nos, 7276 to 7283 : Name of general-purpose switch & Parameters Nos. 7284 to 7291 : Name of general-purpose switch 9 Parameters Nos. 7292 to 7299 : Name of general-purpose switch 10 Parameters Nos. 7352 to 7359 : Name of general-purpose switch 11 Parameters Nos. 7360 to 7367 : Name of general-purpose switch 12 Parameters Nos. 7368 to 7375 : Name of general-purpose switch 13 Parameters Nos. 7376 to 7383 : Name of general-purpose switch 14 Parameters Nos. 7384 to 7391 : Name of general-purpose switch 15 Parameters Nos. 7392 to 7399 : Name of general-purpose switch 16 Ex) Setting of the name of general-purpose switch 1 on the software operator's panel ‘The name of general-purpose switch | on the software operator's panel can be set to “OVR{81”, inthe following setting ofthe parameters Nos. 7220 to 7227. (When bit 0 (PC) of parameter No, 7201 is set to 1) Parameter Setting value (Character 7220 79 7224 86 7222, 82 7223 4 7224 8 2 32 49 7225 7226 7227 panel general-purpose switches FANUC Series 35/-B/Power Motion 7-A Twe [Full-size character of Software operator B-64530EN/01-09, B-64580EN/01-02 DesignoRfgs1 + NOFF + Morr geeeeee2 [Chara] Code [chara] Code [chara] Code [chara] cter ter eter 85 al 54 |. 66 82 ss | - 87 83 56 68 84 57 iz oo |v | 65 a2 |: 70 1 ee ee u s7 |” | 34 |< 2 88 35] = i 13 so | $ | 36 | > | 74 | go | x | 37 |? 15 43 | & | 38 | @ 16 4a | * | aa] ¢ 1 so | (| 4 | ¥ 18 Sif) | ar fd 79 52] + | 42 80 s3 f+ | 43 | 7 NOTE ‘The dakuten ( *)(voiced sound e2"| B-64530EN/01-09, B-64580EN/01-02 Description 0. ju 2013 [Design FANUC Corporation jm] |Full-size character code list (a) chara Code. Chara Code. Chara Cove Chara Code cter_[ High [ Cow} cter bh] tow | _cter_ | High cter_| High 64 B a 66 68 70 72 74 76 78 80 82 84 EF 88 90 92 98 96 38 7 4] ee] A} A] » Jott] ale 3] s/o} fof] ole) o] aaa] al s}] 5| a a se ee >] = C c $ = € = = ct] 9+] a] palo) a] 2) >f > FANUC Series 357-B/Power Motion 7-A Title |Full-size character of Software operator's panel general-purpose switches ee"| B-64530EN/01-09, B-64580EN/01-02Full-size character code list (b) ‘code Chara Code. h_| Low | cter_ [High 64 66 68 70 72 74 76 78 80 82 4 86 38 20 22 34 96 98 7100 102 104 10 108 110 112 1 116 i 120 122 124 126 sh) | al 3 as ay 2] Sy a val ae] 1) 88 a) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 z 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3Full-size character code list (c) Chara’ Code. Chara Code. chara Code Chara Code. cter_| High | tow || cter_ [High [tow || cter jh ctet_[ High m4 % 4 64 & is 66 = 68 70 72 74 76 78 80 82 84 86 38 90 92 94 96 98 100 102 104 108 108 110 112 114 116 118 720 122 124 126 4 8} C3) Ha} rf a 4] 3] 3 a +) a 4 4 4 4 4 4 4 4 4 + 4 4 4 4 4 4 4 4 4 4 4 4 4 4 + 4 4 4 4 4 4 5 se x0] | Se] aH B-64530EN/01-09, B-64580EN/01-02 FANUC Corporation Jo] |Full-size character code list (d) ‘Chara ‘Code Chara’ Code Chara’ Code. Chara Code cter_ [High | Low | cter Tow |_cter_| "High: cter_| High it 64 5 66 a 68 & x 70 = 72 74 76 78 80 82 84 86 38 90 2 36 9% 8 oy i) al 2) si] >) a) sa) 9 a n} Se SH] $8) ae] SB) a8) se 33] 5 Se ee ee A eatelelelel elas telelelelaelsla lia lal >i) a] a 6 6 5 5 3 3 5 3 5 5 5 5 5 a 5 S % | 5 es 5 5 5 3 5 3 5 3 3 3 5 5 a 5 ee" B-64530EN/01-09, B-64580EN/01-02 FANUC Corporation fem]Full-size charactor code list (e) Code’ Code Code Low High, 64 66. 68, 70 72 Th 76 78. EG 82 4 86 28 90, 3 4 96 98 | 4 al ado ass] a) sa a] as a si 8 pea ye 55 59] 5) 3 9] 25} SH) 33] a or ale 54 9) si) 2 a a Bad 53) 5) 8 es 3] 37 fs i il | 2 35) a Ba = x 7 ig % iE Je" s-esssoewor.as, B-64580EN/01-02 FANUC Corporation | on]‘Chara ter © aT ‘Date Code Chara’ High [ tow] ctet Ez De 04. Julz013 [Deal Full-size character code list (f) ‘Cove. Tow 64 66 68 70 72 4 76 78 80 82 84 86 88 90 2 34 96 98 700 102 104 106 108: 110 112 114 116 ti 120 122 124 126, chara eter q a} a) 5) 25 a S55) Code High FANUC Series 357-B/Power Motion 1-A Tile |Full-size character of Software operator's anel general-purpose switches Na" | B-64530EN/01-09, B-64580EN/01-02 FANUC Corporation | street | 10/11NOTE 1. The character can be displayed up to the character code just before the parameter Nos. 7220 to 7399 is set {0 0, in the name of a general-purpose switch on the software operator's panel. Therefore, if using the space. specify the character code “32" (the space of the half-size character), Ext) When the parameter is set o 0 in the hal-size character Parameter | Setting value Character 7220 7221 i 7222 7223 7224 7225 7226 7221 ‘The character string of display : “143” x2) When the parameter is set to 32 (the Parameter Setting value 7220 7224 7222 7223 7224 7225 7226 7227 The character string of display : "#123" 2 Donot specify the character codes of the blank in the “Full-size character code list’. When itis specified, the space of the fullsize character or an invalid characteris displayed, 3. Please specify two spaces of the hall-size character to display a space of the fullsize character. =F: B-64530EN/01-09, B-64580EN/01-02 i FANUC Corporation Los. Jui.2013 [Design] Ape