Owner: SAERTEX multiCom GmbH

No.: MD-24015-EN
Issued: 18-12-2024
Valid to: 18-12-2029

EPD
3rd PARTY VERIFIED

VERIFIZIERT

VERIFIED ENVIRONMENTAL PRODUCT DECLARATION | ISO 14025 & EN 15804

 Issued: Valid to:
Owner of declaration 18-12-2024 18-12-2029
SAERTEX multiCom GmbH
Brochterbecker Damm 52
48369 Saerbeck Basis of calculation
This EPD is developed and verified in accordance with
VAT no. DE 812047171
the European standard EN 15804+A2.

Programme Comparability
EPD Danmark EPDs of construction products may not be comparable
www.epddanmark.dk if they do not comply with the requirements in EN
15804. EPD data may not be comparable if the
datasets used are not developed in accordance with
☐ Industry -EPD EN 15804 and if the background systems are not
☒ Product -EPD based on the same database.

Validity
This EPD has been verified in accordance with ISO
Declared product(s)
14025 and is valid for 5 years from the date of issue.
This EPD covers all the products listed below that are sold under
the name SAERTEX-LINER® MULTI (with the exception of type Use
E). The production series is divided into 3 size categories: The intended use of an EPD is to communicate
scientifically based environmental information for
Small: declared product  600 mm/ 5 mm construction products, for the purpose of assessing
• Diameter:  150 mm –  1000 mm the environmental performance of buildings.
• Wall thickness: 3 mm – 6,3 mm EPD type
Medium: declared product  800 mm/ 10 mm ☐ Cradle-to-gate with modules C1-C4 and D
• Diameter:  150 mm –  1300 mm ☒ Cradle-to-gate with options, modules C1-C4 and D
• Wall thickness: 6,4 mm – 10,3 mm ☐ Cradle-to-grave and module D
Large: declared product  1200 mm/ 12 mm ☐ Cradle-to-gate
• Diameter:  150 mm –  1600 mm ☐ Cradle-to-gate with options
• Wall thickness: 10,4 mm - 15 mm

(The wall thickness refers to the combination wall thickness) CEN standard EN 15804 serves as the core PCR

Number of declared data records/product variants: 3 Product Category Rules (PCR): Construction
products, 2019:14, version 1.2.5, valid until
Production site 2024-12-20
SAERTEX multiCom GmbH Independent verification of the declaration and
Brochterbecker Damm 52 data, according to EN ISO 14025
48369 Saerbeck
☐ internal ☒ external

Use of Guarantees of Origin

☒ No certificates used Third party verifier:
☐ Electricity covered by GoO
☐ Biogas covered by GoO

Declared/ functional unit

1 m³ Liner material. Kim Christiansen

Year of production site data (A3)

2023 Martha Katrine Sørensen
EPD Danmark

EPD version
This EPD is the original version.

MD-24015-EN | SAERTEX multiCom GmbH | page 2 of 21

 Raw material

X
A1
supply

X
Transport

A2
Product

X
Manufacturing

A3

X
Transport

A4
process

Installation

X
A5
Construction

process

Use

B1

MND
Maintenance
B2

MND Repair
B3

MND

Replacement
B4

MND
Use

Refurbishment
B5

MND

Operational
B6

MND

energy use
Life cycle stages and modules (MND = module not declared)

Operational
B7

MND

water use

De-construction
X
C1

demolition
X

Transport
C2
End of life

Waste processing
C3

Disposal
C4

Re-use, recovery
D

and recycling
potential
Beyond the
system boundary

MD-24015-EN | SAERTEX multiCom GmbH | page 3 of 21

Product information
Product description Hazardous substances

The main product components are shown in the The products do not contain any substances on
table below. the ECHA list of Substances of Very High Concern
(SVHC).
Material Weight-% of declared
product (http://echa.europa.eu/candidate-list-table)
Glass Fibers 43,5 % - 56,1 %
Polyester Resin 34,1 % - 36,6 %
Foils 5,1 % - 11,3 %
Product(s) use
Other 2,1 % - 11,0 %
Total 100 % The liners considered in this study are used for
the trenchless rehabilitation of gravity and
Product packaging
pressure sewers.
The composition of the product's sales and
Essential characteristics
transport packaging is shown in the table below.
The liners are packed in wooden boxes in all sizes. Technical information can be requested from the
manufacturer or can be found on the
Material Weight of Weight-% of
manufacturer's website:
packaging packaging
material (kg)
Wooden Box 120 - 205 100 % www.saertex-multicom.de

Representativity
Reference Service Life (RSL)
The declared unit is 1 m³ of liner material.
Transportation and energy consumption (diesel The expected reference service life is 100 years
for generators and vehicles on the construction for gravity liner. To achieve the required product
site) for installation and removal were determined quality, a conformity assessment in accordance
and taken into account for a common process. with DIN CEN ISO/TS 23818-2 can be carried out.
As part of this conformity assessment, tests are
This declaration, including the data collection,
carried out in accordance with the quality
modeling and results, covers the manufacture of
standards specified in ISO 11296-4.
the liners at the production site in Saerbeck,
Germany. The product-specific data is based on The expected reference service life is 50 years for
average values collected for the year 2023. pressure liners. To achieve the required product
quality, a conformity assessment in accordance
The background data is based on the GaBi LCA
with DIN CEN ISO/TS 23818-2 can be carried out.
software and is less than 10 years old. In general,
As part of this conformity assessment, tests are
the background data sets used are of high quality
carried out in accordance with the quality
and the majority of the data sets are only a few
standards specified in ISO 11297-4.
years old.

MD-24015-EN | SAERTEX multiCom GmbH | page 4 of 21

Picture of product

Structure of the product

MD-24015-EN | SAERTEX multiCom GmbH | page 5 of 21

LCA background
Declared unit
The results of the life cycle assessment in this study refer to 1 m³ of liner material. The following product
specifications indicate the respective diameters 600 mm, 800 mm and 1200 mm and the wall thickness of
the liner from 5 mm to 12 mm.

Name MULTI 600/5 MULTI 800/10 MULTI 1200/12 Unit

Declared unit 1 m³
Density 2.232 2.065 2.025 kg/m³
Conversion factor to 1 kg. 0,00045 0,00048 0,0005 -

The declared products cover the following product spans, which are divided into 3 categories:

Small: declared product  600 mm/ 5 mm covers the following product sizes

• diameter:  150 mm –  1000 mm

• wall thickness: 3 mm – 6,3 mm

Medium: declared product  800 mm/ 10 mm covers the following product sizes

• diameter:  150 mm –  1300 mm

• wall thickness: 6,4 mm – 10,3 mm

Large: declared product  1200 mm/ 12 mm covers the following product sizes

• diameter:  150 mm–  1600 mm

• wall thickness: 10,4 mm - 15 mm

All products within the individual parts of the range deviate by less than 10 % from the declared
values/parameters for the environmental parameters.

Functional unit

The functional unit is not defined, therefore a declared unit is used.

PCR

This EPD fulfills the requirements of EN 15804 version A2:2019 for the product category construction
products.

Energy modelling principles

Foreground system:

No "guarantees of origin" are used in production. Electricity consumption is modeled using a mix for
electricity that is representative of the Saerbeck production site in Germany.

Background system:

Other processes upstream and downstream of production are modeled with processes from the GaBi
background database, which is based on average data.

MD-24015-EN | SAERTEX multiCom GmbH | page 6 of 21

Flowdiagram

The process diagram below shows the life cycle of the product under consideration.

MD-24015-EN | SAERTEX multiCom GmbH | page 7 of 21

System boundary Construction process stage (A4-A5)
includes:
This EPD is based on a cradle-to-gate life cycle
assessment (LCA), in which 100% by weight was A4 – Transportation to the construction site
taken into account. A5 – Installation in the building/pipe system

The general rules for the exclusion of inputs and Module A4 considers the transportation of the
outputs follows the requirements in EN 15804, packaged product to the construction site. A
6.3.5, where the total of neglected input flows per transportation distance of 900 km was assumed
module shall be a maximum of 5 % of energy at this point. Module A5 covers the energy
usage and mass and 1 % of energy usage and requirement in the form of diesel for preparatory
mass for unit processes. work and the installation itself, as well as the
disposal of the product packaging. A credit for
Product stage (A1-A3) includes: energy substitution through thermal utilization of
the packaging material is made in Module D.
A1 – Extraction and processing of raw materials
A2 – Transportation to the production site End of Life (C1-C4) includes:
A3 – Manufacturing process
In module C1, the energy input in the form of
The product stage comprises the acquisition of all diesel from a machine for dismantling the product
raw materials, products and energy, transport to was taken into account. Module C2 takes into
the production site, packaging and waste account the transportation of the demolition
processing up to the ”end-of-waste” state or final material to the disposal company and module C4
disposal. The LCA results are declared in the thermal recycling of the material, which was
aggregated form for the product stage, which collected before.
means, that the sub-modules A1, A2 and A3 are
declared as one module A1-A3. Re-use, recovery and recycling potential (D)
includes:
In the first step, the inner and outer liner are
produced with the glass fiber mat and combined The potential benefit of substituting fossil fuels
to form the so-called dry liner. in the course of energy generation with thermal
utilization of the product at the end of its life
The dry liner is then impregnated with a special cycle is balanced in Module D. The energy
resin mixture. The liner is then given an outer generated is credited to the system through
film and UV protection film and prepared for substitution processes, whereby it is assumed
transport. that the thermal energy would be generated
from natural gas and the substituted electricity
would correspond to the German electricity mix.

MD-24015-EN | SAERTEX multiCom GmbH | page 8 of 21

LCA results
The values in the following tables are shown in scientific notation, e.g. 1.04E+02. This value can also be
output as 1.04*10² or 104. This is identical for numbers with a negative superscript.
The results of the impact categories of the individual liners do not deviate from each other by more than
10%.

SAERTEX-LINER® MULTI 600/5

ENVIRONMENTAL IMPACTS PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
GWP-total [kg CO2 eq.] 5,79E+03 1,56E+02 8,52E+02 2,64E+02 1,64E+01 0,00E+00 2,83E+03 -7,80E+02
GWP-fossil [kg CO2 eq.] 5,78E+03 1,56E+02 6,36E+02 3,83E+02 1,64E+01 0,00E+00 1,08E+03 -7,75E+02
GWP- [kg CO2 eq.] 2,34E-01 -7,01E-01 2,13E+02 -1,35E+02 -7,38E-02 0,00E+00 1,76E+03 -5,36E+00
biogenic
GWP-luluc [kg CO2 eq.] 2,21E+00 9,36E-01 3,76E+00 1,65E+01 9,85E-02 0,00E+00 5,62E-02 -6,95E-02
[kg CFC 11
ODP 1,47E-07 3,86E-11 1,90E-10 6,82E-10 4,06E-12 0,00E+00 9,15E-10 -1,06E-08
eq.]
AP [mol H+ eq.] 2,68E+01 1,84E-01 7,21E+00 1,69E+00 1,94E-02 0,00E+00 1,58E+00 -7,85E-01
EP-
[kg P eq.] 8,74E-03 3,69E-04 1,49E-03 6,51E-03 3,88E-05 0,00E+00 3,74E-04 -2,01E-03
freshwater
EP-marine [kg N eq.] 5,13E+00 6,52E-02 3,66E+00 3,90E-01 6,87E-03 0,00E+00 6,07E-01 -2,89E-01
EP- 5,59E+01 7,82E-01 4,04E+01 5,06E+00 8,24E-02 0,00E+00 7,20E+00 -3,07E+00
[mol N eq.]
terrestrial
[kg NMVOC 1,85E+01 1,61E-01 1,06E+01 1,36E+00 1,70E-02 0,00E+00 1,57E+00 -7,45E-01
POCP
eq.]
ADPm1 [kg Sb eq.] 2,42E-03 1,13E-05 4,57E-05 2,00E-04 1,19E-06 0,00E+00 6,63E-06 -6,73E-05
ADPf1 [MJ] 1,17E+05 2,13E+03 8,59E+03 3,76E+04 2,24E+02 0,00E+00 1,37E+03 -1,21E+04
[m3 world eq.
WDP1 7,35E+02 8,21E-01 2,63E+01 1,45E+01 8,65E-02 0,00E+00 3,50E+02 -1,04E+01
deprived]
GWP-total = Globale Warming Potential - total; GWP-fossil = Global Warming Potential - fossil fuels; GWP-biogenic = Global Warming Potential -
biogenic; GWP-luluc = Global Warming Potential - land use and land use change; ODP = Ozone Depletion; AP = Acidifcation; EP-freshwater =
Caption Eutrophication – aquatic freshwater; EP-marine = Eutrophication – aquatic marine; EP-terrestrial = Eutrophication – terrestrial; POCP =
Photochemical zone formation; ADPm = Abiotic Depletion Potential – minerals and metals; ADPf = Abiotic Depletion Potential – fossil fuels; WDP =
water depletion potential
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited experienced
Disclaimer
with the indicator.

ADDITIONAL ENVIRONMENTAL IMPACTS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
[Disease 2,76E-04 1,29E-06 1,68E-04 1,33E-05 1,36E-07 0,00E+00 1,05E-05 -5,71E-06
PM
incidence]
[kBq U235
IRP2 1,42E+02 3,00E-01 1,39E+00 5,31E+00 3,16E-02 0,00E+00 4,87E+00 -4,95E+01
eq.]
1 4,55E+04 1,55E+03 6,26E+03 2,74E+04 1,63E+02 0,00E+00 5,25E+02 -1,87E+03
ETP-fw [CTUe]
HTP-c1 [CTUh] 2,03E-05 3,09E-08 1,26E-07 5,47E-07 3,26E-09 0,00E+00 5,07E-08 -1,47E-07
HTP-nc1 [CTUh] 9,15E-05 1,30E-06 5,29E-06 2,29E-05 1,37E-07 0,00E+00 3,85E-06 -4,01E-06
SQP1 - 3,96E+04 7,57E+02 3,06E+03 1,34E+04 7,97E+01 0,00E+00 4,61E+02 -3,14E+03
PM = Particulate Matter emissions; IRP = Ionizing radiation – human health; ETP-fw = Eco toxicity – freshwater; HTP-c = Human toxicity –
Caption
cancer effects; HTP-nc = Human toxicity – non cancer effects; SQP = Soil Quality (dimensionless)
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited
experienced with the indicator.
Disclaimers 2
This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not
consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential
ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.

MD-24015-EN | SAERTEX multiCom GmbH | page 9 of 21

 RESOURCE USE PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

PERE [MJ] 1,20E+04 1,43E+02 5,89E+02 2,52E+03 1,50E+01 0,00E+00 4,50E+02 -4,74E+03

PERM [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PERT [MJ] 1,20E+04 1,43E+02 5,89E+02 2,52E+03 1,50E+01 0,00E+00 4,50E+02 -4,74E+03

PENRE [MJ] 1,17E+05 2,13E+03 8,61E+03 3,77E+04 2,24E+02 0,00E+00 1,37E+03 -1,21E+04

PENRM [MJ] 2,69E+04 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PENRT [MJ] 1,44E+05 2,13E+03 8,61E+03 3,77E+04 2,24E+02 0,00E+00 1,37E+03 -1,21E+04

SM [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

RSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

NRSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

FW [m3] 2,61E+01 1,27E-01 1,05E+00 2,24E+00 1,34E-02 0,00E+00 8,30E+00 -1,64E+00

PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable
primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non renewable
Caption primary energy excluding non renewable primary energy resources used as raw materials; PENRM = Use of non renewable primary energy
resources used as raw materials; PENRT = Total use of non renewable primary energy resources; SM = Use of secondary material; RSF = Use
of renewable secondary fuels; NRSF = Use of non renewable secondary fuels; FW = Net use of fresh water

WASTE CATEGORIES AND OUTPUT FLOWS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

HWD [kg] 1,36E-04 3,59E-09 1,49E-08 6,35E-08 3,78E-10 0,00E+00 1,36E-08 -7,95E-07

NHWD [kg] 5,69E+02 3,19E-01 3,44E+00 5,63E+00 3,36E-02 0,00E+00 1,68E+02 -6,59E+00

RWD [kg] 1,15E+00 2,80E-03 1,30E-02 4,96E-02 2,95E-04 0,00E+00 4,60E-02 -4,74E-01

CRU [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MFR [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MER [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

EEE [MJ] 3,88E+02 0,00E+00 2,76E+02 0,00E+00 0,00E+00 0,00E+00 2,60E+03 0,00E+00

EET [MJ] 9,02E+02 0,00E+00 6,47E+02 0,00E+00 0,00E+00 0,00E+00 6,04E+03 0,00E+00
HWD = Hazardous waste disposed; NHWD = Non hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-
Caption use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy

BIOGENIC CARBON CONTENT PER [m³]

Parameter Unit At the factory gate

Biogenic carbon content in product kg C 6,73E-08

Biogenic carbon content in accompanying packaging kg C 1,56E-09
Note: 1 kg biogenic carbon is equivalent to 44/12 kg of CO2

MD-24015-EN | SAERTEX multiCom GmbH | page 10 of 21

SAERTEX-LINER® MULTI 800/10
ENVIRONMENTAL IMPACTS PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
GWP-total [kg CO2 eq.] 5,56E+03 1,46E+02 6,71E+02 1,11E+02 1,52E+01 0,00E+00 2,62E+03 -7,40E+02
GWP-fossil [kg CO2 eq.] 5,59E+03 1,46E+02 4,19E+02 1,60E+02 1,52E+01 0,00E+00 9,95E+02 -7,35E+02
GWP- [kg CO2 eq.]
-3,77E+01 -6,57E-01 2,49E+02 -5,66E+01 -6,82E-02 0,00E+00 1,63E+03 -5,09E+00
biogenic
GWP-luluc [kg CO2 eq.] 2,19E+00 8,77E-01 2,44E+00 6,92E+00 9,11E-02 0,00E+00 5,20E-02 -6,59E-02
[kg CFC 11
ODP 1,86E-07 3,62E-11 1,41E-10 2,85E-10 3,76E-12 0,00E+00 8,46E-10 -1,01E-08
eq.]
AP [mol H+ eq.] 2,87E+01 1,73E-01 4,71E+00 7,06E-01 1,79E-02 0,00E+00 1,46E+00 -7,45E-01
EP-
[kg P eq.] 7,75E-03 3,46E-04 9,71E-04 2,73E-03 3,59E-05 0,00E+00 3,46E-04 -1,90E-03
freshwater
EP-marine [kg N eq.] 5,35E+00 6,12E-02 2,39E+00 1,63E-01 6,35E-03 0,00E+00 5,61E-01 -2,74E-01
EP-
[mol N eq.] 5,84E+01 7,34E-01 2,63E+01 2,12E+00 7,62E-02 0,00E+00 6,66E+00 -2,92E+00
terrestrial
[kg NMVOC 1,88E+01 1,51E-01 6,89E+00 5,67E-01 1,57E-02 0,00E+00 1,45E+00 -7,07E-01
POCP
eq.]
ADPm1 [kg Sb eq.] 2,74E-03 1,06E-05 2,98E-05 8,37E-05 1,10E-06 0,00E+00 6,13E-06 -6,38E-05
ADPf1 [MJ] 1,09E+05 1,99E+03 5,61E+03 1,57E+04 2,07E+02 0,00E+00 1,27E+03 -1,15E+04
[m3 world eq.
WDP1 8,00E+02 7,70E-01 2,91E+01 6,07E+00 8,00E-02 0,00E+00 3,24E+02 -9,89E+00
deprived]
GWP-total = Globale Warming Potential - total; GWP-fossil = Global Warming Potential - fossil fuels; GWP-biogenic = Global Warming Potential -
biogenic; GWP-luluc = Global Warming Potential - land use and land use change; ODP = Ozone Depletion; AP = Acidifcation; EP-freshwater =
Caption Eutrophication – aquatic freshwater; EP-marine = Eutrophication – aquatic marine; EP-terrestrial = Eutrophication – terrestrial; POCP =
Photochemical zone formation; ADPm = Abiotic Depletion Potential – minerals and metals; ADPf = Abiotic Depletion Potential – fossil fuels; WDP =
water depletion potential
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited experienced
Disclaimer
with the indicator.

ADDITIONAL ENVIRONMENTAL IMPACTS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
[Disease 3,00E-04 1,21E-06 1,09E-04 5,56E-06 1,26E-07 0,00E+00 9,70E-06 -5,41E-06
PM
incidence]
[kBq U235
IRP2 1,31E+02 2,82E-01 1,00E+00 2,22E+00 2,93E-02 0,00E+00 4,50E+00 -4,69E+01
eq.]
ETP-fw1 [CTUe] 4,00E+04 1,46E+03 4,08E+03 1,15E+04 1,51E+02 0,00E+00 4,85E+02 -1,78E+03
HTP-c1 [CTUh] 2,32E-05 2,90E-08 8,25E-08 2,29E-07 3,01E-09 0,00E+00 4,69E-08 -1,40E-07
HTP-nc1 [CTUh] 7,89E-05 1,22E-06 3,46E-06 9,59E-06 1,26E-07 0,00E+00 3,56E-06 -3,80E-06
SQP1 - 4,40E+04 7,10E+02 2,00E+03 5,60E+03 7,37E+01 0,00E+00 4,27E+02 -2,98E+03
PM = Particulate Matter emissions; IRP = Ionizing radiation – human health; ETP-fw = Eco toxicity – freshwater; HTP-c = Human toxicity –
Caption
cancer effects; HTP-nc = Human toxicity – non cancer effects; SQP = Soil Quality (dimensionless)
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited
experienced with the indicator.
2
Disclaimers This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not
consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential
ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.

MD-24015-EN | SAERTEX multiCom GmbH | page 11 of 21

 RESOURCE USE PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

PERE [MJ] 1,11E+04 1,34E+02 3,92E+02 1,05E+03 1,39E+01 0,00E+00 4,16E+02 -4,49E+03

PERM [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PERT [MJ] 1,11E+04 1,34E+02 3,92E+02 1,05E+03 1,39E+01 0,00E+00 4,16E+02 -4,49E+03

PENRE [MJ] 1,09E+05 2,00E+03 5,62E+03 1,58E+04 2,08E+02 0,00E+00 1,27E+03 -1,15E+04

PENRM [MJ] 1,38E+04 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PENRT [MJ] 1,23E+05 2,00E+03 5,62E+03 1,58E+04 2,08E+02 0,00E+00 1,27E+03 -1,15E+04

SM [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

RSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

NRSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

FW [m3] 2,57E+01 1,19E-01 9,65E-01 9,38E-01 1,24E-02 0,00E+00 7,68E+00 -1,55E+00

PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable
primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non renewable
Caption primary energy excluding non renewable primary energy resources used as raw materials; PENRM = Use of non renewable primary energy
resources used as raw materials; PENRT = Total use of non renewable primary energy resources; SM = Use of secondary material; RSF = Use
of renewable secondary fuels; NRSF = Use of non renewable secondary fuels; FW = Net use of fresh water

WASTE CATEGORIES AND OUTPUT FLOWS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

HWD [kg] 7,22E-05 3,37E-09 9,92E-09 2,66E-08 3,50E-10 0,00E+00 1,25E-08 -7,55E-07

NHWD [kg] 4,88E+02 2,99E-01 3,47E+00 2,36E+00 3,11E-02 0,00E+00 1,56E+02 -6,25E+00

RWD [kg] 1,00E+00 2,63E-03 9,38E-03 2,07E-02 2,73E-04 0,00E+00 4,26E-02 -4,50E-01

CRU [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MFR [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MER [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

EEE [MJ] 2,78E+02 0,00E+00 3,24E+02 0,00E+00 0,00E+00 0,00E+00 2,40E+03 0,00E+00

EET [MJ] 6,47E+02 0,00E+00 7,58E+02 0,00E+00 0,00E+00 0,00E+00 5,58E+03 0,00E+00

HWD = Hazardous waste disposed; NHWD = Non hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-
Caption
use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy

BIOGENIC CARBON CONTENT PER [m³]

Parameter Unit At the factory gate

Biogenic carbon content in product kg C 5,40E-08

Biogenic carbon content in accompanying packaging kg C 1,82E-09
Note: 1 kg biogenic carbon is equivalent to 44/12 kg of CO2

MD-24015-EN | SAERTEX multiCom GmbH | page 12 of 21

SAERTEX-LINER® MULTI 1200/12
ENVIRONMENTAL IMPACTS PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
GWP-total [kg CO2 eq.] 5,40E+03 1,48E+02 7,66E+02 6,90E+01 1,49E+01 0,00E+00 2,57E+03 -7,69E+02
GWP-fossil [kg CO2 eq.] 5,51E+03 1,48E+02 3,98E+02 1,00E+02 1,49E+01 0,00E+00 9,76E+02 -7,63E+02
GWP- [kg CO2 eq.]
-1,06E+02 -6,65E-01 3,66E+02 -3,53E+01 -6,69E-02 0,00E+00 1,60E+03 -5,28E+00
biogenic
GWP-luluc [kg CO2 eq.] 2,18E+00 8,88E-01 2,27E+00 4,31E+00 8,94E-02 0,00E+00 5,10E-02 -6,85E-02
[kg CFC 11
ODP 1,84E-07 3,66E-11 1,54E-10 1,78E-10 3,69E-12 0,00E+00 8,30E-10 -1,05E-08
eq.]
AP [mol H+ eq.] 2,85E+01 1,75E-01 4,41E+00 4,40E-01 1,76E-02 0,00E+00 1,43E+00 -7,73E-01
EP-
[kg P eq.] 7,60E-03 3,50E-04 9,09E-04 1,70E-03 3,52E-05 0,00E+00 3,39E-04 -1,98E-03
freshwater
EP-marine [kg N eq.] 5,31E+00 6,19E-02 2,23E+00 1,02E-01 6,23E-03 0,00E+00 5,50E-01 -2,85E-01
EP-
[mol N eq.] 5,80E+01 7,43E-01 2,46E+01 1,32E+00 7,47E-02 0,00E+00 6,53E+00 -3,03E+00
terrestrial
[kg NMVOC 1,87E+01 1,53E-01 6,43E+00 3,54E-01 1,54E-02 0,00E+00 1,43E+00 -7,35E-01
POCP
eq.]
ADPm1 [kg Sb eq.] 3,66E-03 1,07E-05 2,79E-05 5,22E-05 1,08E-06 0,00E+00 6,01E-06 -6,63E-05
ADPf1 [MJ] 1,07E+05 2,02E+03 5,25E+03 9,80E+03 2,03E+02 0,00E+00 1,24E+03 -1,20E+04
[m3 world eq.
WDP1 7,95E+02 7,79E-01 4,15E+01 3,79E+00 7,85E-02 0,00E+00 3,17E+02 -1,03E+01
deprived]
GWP-total = Globale Warming Potential - total; GWP-fossil = Global Warming Potential - fossil fuels; GWP-biogenic = Global Warming Potential -
biogenic; GWP-luluc = Global Warming Potential - land use and land use change; ODP = Ozone Depletion; AP = Acidifcation; EP-freshwater =
Caption Eutrophication – aquatic freshwater; EP-marine = Eutrophication – aquatic marine; EP-terrestrial = Eutrophication – terrestrial; POCP =
Photochemical zone formation; ADPm = Abiotic Depletion Potential – minerals and metals; ADPf = Abiotic Depletion Potential – fossil fuels; WDP =
water depletion potential
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited experienced
Disclaimer
with the indicator.

ADDITIONAL ENVIRONMENTAL IMPACTS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D
[Disease 3,09E-04 1,22E-06 1,02E-04 3,47E-06 1,23E-07 0,00E+00 9,52E-06 -5,62E-06
PM
incidence]
[kBq U235
IRP2 1,30E+02 2,85E-01 1,05E+00 1,38E+00 2,87E-02 0,00E+00 4,42E+00 -4,87E+01
eq.]
ETP-fw1 [CTUe] 3,90E+04 1,47E+03 3,81E+03 7,16E+03 1,48E+02 0,00E+00 4,76E+02 -1,84E+03
HTP-c1 [CTUh] 3,32E-05 2,94E-08 7,78E-08 1,43E-07 2,96E-09 0,00E+00 4,60E-08 -1,45E-07
HTP-nc1 [CTUh] 7,72E-05 1,23E-06 3,24E-06 5,98E-06 1,24E-07 0,00E+00 3,49E-06 -3,95E-06
SQP1 - 6,13E+04 7,18E+02 1,87E+03 3,49E+03 7,23E+01 0,00E+00 4,18E+02 -3,09E+03
PM = Particulate Matter emissions; IRP = Ionizing radiation – human health; ETP-fw = Eco toxicity – freshwater; HTP-c = Human toxicity –
Caption
cancer effects; HTP-nc = Human toxicity – non cancer effects; SQP = Soil Quality (dimensionless)
1
The results of this environmental indicator shall be used with care as the uncertainties on these results are high or as there is limited
experienced with the indicator.
2
Disclaimers This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not
consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential
ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.

MD-24015-EN | SAERTEX multiCom GmbH | page 13 of 21

 RESOURCE USE PER [m³]
Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

PERE [MJ] 1,17E+04 1,35E+02 3,75E+02 6,57E+02 1,36E+01 0,00E+00 4,08E+02 -4,67E+03

PERM [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PERT [MJ] 1,17E+04 1,35E+02 3,75E+02 6,57E+02 1,36E+01 0,00E+00 4,08E+02 -4,67E+03

PENRE [MJ] 1,07E+05 2,02E+03 5,26E+03 9,82E+03 2,04E+02 0,00E+00 1,24E+03 -1,20E+04

PENRM [MJ] 1,21E+04 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

PENRT [MJ] 1,19E+05 1,35E+03 5,26E+03 9,82E+03 2,04E+02 0,00E+00 1,24E+03 -1,20E+04

SM [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

RSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

NRSF [MJ] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

FW [m3] 2,53E+01 1,20E-01 1,24E+00 5,85E-01 1,21E-02 0,00E+00 7,53E+00 -1,61E+00

PERE = Use of renewable primary energy excluding renewable primary energy resources used as raw materials; PERM = Use of renewable
primary energy resources used as raw materials; PERT = Total use of renewable primary energy resources; PENRE = Use of non renewable
Caption primary energy excluding non renewable primary energy resources used as raw materials; PENRM = Use of non renewable primary energy
resources used as raw materials; PENRT = Total use of non renewable primary energy resources; SM = Use of secondary material; RSF = Use
of renewable secondary fuels; NRSF = Use of non renewable secondary fuels; FW = Net use of fresh water

WASTE CATEGORIES AND OUTPUT FLOWS PER [m³]

Parameter Unit A1-A3 A4 A5 C1 C2 C3 C4 D

HWD [kg] 6,08E-05 3,41E-09 9,53E-09 1,66E-08 3,43E-10 0,00E+00 1,23E-08 -7,84E-07

NHWD [kg] 4,85E+02 3,03E-01 4,67E+00 1,47E+00 3,05E-02 0,00E+00 1,53E+02 -6,49E+00

RWD [kg] 9,85E-01 2,66E-03 9,83E-03 1,29E-02 2,68E-04 0,00E+00 4,17E-02 -4,67E-01

CRU [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MFR [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

MER [kg] 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00 0,00E+00

EEE [MJ] 2,61E+02 0,00E+00 4,75E+02 0,00E+00 0,00E+00 0,00E+00 2,36E+03 0,00E+00

EET [MJ] 6,07E+02 0,00E+00 1,11E+03 0,00E+00 0,00E+00 0,00E+00 5,48E+03 0,00E+00

HWD = Hazardous waste disposed; NHWD = Non hazardous waste disposed; RWD = Radioactive waste disposed; CRU = Components for re-
Caption
use; MFR = Materials for recycling; MER = Materials for energy recovery; EEE = Exported electrical energy; EET = Exported thermal energy

BIOGENIC CARBON CONTENT PER [m³]

Parameter Unit At the factory gate

Biogenic carbon content in product kg C 5,17E-08

Biogenic carbon centent in accompanying packagaing kg C 2,66E-09
Note: 1 kg biogenic carbon is equivalent to 44/12 kg of CO2

MD-24015-EN | SAERTEX multiCom GmbH | page 14 of 21

Additional information
LCA interpretation
Most of the environmental impact comes from the production of raw materials in module A1, with the
production of glass fibers dominating, followed by the production of the resin. In addition to the
production of raw materials, the thermal utilization of the product at the end of its life cycle also has a
major influence on the overall result. The other indicators largely follow the same pattern. A graphical
representation can be found in the diagrams below with the percentage shares of the individual life cycle
stages in the overall result.

MD-24015-EN | SAERTEX multiCom GmbH | page 15 of 21

Technical information on scenarios

SAERTEX-LINER® MULTI 600/5

Transport to the building site (A4)
Scenario information Value Unit
Fuel type Diesel -
Vehicle type LKW Euro 6, 34-40 t Total weight -
Transport distance 900 km
Capacity utilisation (including empty runs) 61 %
Gross density of products transported 2.232 kg/m³

Installation of the product in the building (A5)

Scenario information Value Unit

Packaging material Wooden transport crate for thermal utilization 120 kg

Support cap for thermal utilization 2,66 kg
Amount of diesel consumed for preparatory work and the actual installation 219 Liter

Reference service life for gravity liners

RSL-Informationen Unit
Reference service Life 100 Years
Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
Indoor environment requested by contacting Saertex multiCom directly.
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

Reference service life for pressure liners

RSL-Informationen Unit
Reference service Life 50 Years

MD-24015-EN | SAERTEX multiCom GmbH | page 16 of 21

 Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
Indoor environment requested by contacting Saertex multiCom directly.
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

End of life (C1-C4)

Scenario information Value Unit
Amount of diesel consumed for dismantling 963 Liter
Collected separately 2.232 kg
For energy recovery 2.232 kg
Type of fuel Diesel -
LKW Euro 6, 34-40 t
Vehicle type -
Total weight
Transportation distance 100 km

Re-use, recovery and recycling potential (D)

Scenario information/Materiel Value Unit
Net flow in module D 2.232 kg
Electrical efficiency of the system 25,9 %
Thermal efficiency of the system 11,1 %

MD-24015-EN | SAERTEX multiCom GmbH | page 17 of 21

SAERTEX-LINER® MULTI 800/10
Transport to the building site (A4)
Scenario information Value Unit
Fuel type Diesel -
Vehicle type LKW Euro 6, 34-40 t Total weight -
Transport distance 900 km
Capacity utilisation (including empty runs) 61 %
Gross density of products transported 2.065 kg/m³

Installation of the product in the building (A5)

Scenario information Value Unit

Packaging material Wooden transport crate for thermal utilization 140 kg

Support cap for thermal utilization 3,54 kg
Amount of diesel consumed for preparatory work and the actual installation 142 Liter

Reference service life for gravity liners

RSL-Informationen Unit
Reference service Life 100 Years
Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
Indoor environment requested by contacting Saertex multiCom directly.
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

Reference service life for pressure liners

RSL-Informationen Unit
Reference service Life 50 Years
Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
Indoor environment requested by contacting Saertex multiCom directly.
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

End of life (C1-C4)

Scenario information Value Unit
Amount of diesel consumed for dismantling 403 Liter
Collected separately 2.065 kg
For energy recovery 2.065 kg
Type of fuel Diesel -
LKW Euro 6, 34-40 t
Vehicle type -
Total weight
Transportation distance 100 km

Re-use, recovery and recycling potential (D)

Scenario information/Materiel Value Unit
Net flow in module D 2.065 kg
Electrical efficiency of the system 25,9 %
Thermal efficiency of the system 11,1 %

MD-24015-EN | SAERTEX multiCom GmbH | page 18 of 21

SAERTEX-LINER® MULTI 1200/12
Transport to the building site (A4)
Scenario information Value Unit
Fuel type Diesel -
Vehicle type LKW Euro 6, 34-40 t Total weight -
Transport distance 900 km
Capacity utilisation (including empty runs) 61 %
Gross density of products transported 2.025 kg/m³

Installation of the product in the building (A5)

Scenario information Value Unit
Packaging material Wooden transport crate for thermal utilization 205 kg
Support cap for thermal utilization 5,32 kg
Amount of diesel consumed for preparatory work and the actual installation 133 Liter

Reference service life for gravity liners

RSL-Informationen Unit
Reference service Life 100 Years
Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work
complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
requested by contacting Saertex multiCom directly.
Indoor environment
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

Reference service life for pressure liners

RSL-Informationen Unit
Reference service Life 50 Years
Declared product properties
Design application parameters
It is assumed that the implementation for installation
Assumed quality of work
complies with the manufacturer's recommendations.
Outdoor environment Technical specifications and instructions can be
Indoor environment requested by contacting Saertex multiCom directly.
https://www.saertex-multicom.de/de/kontakt
Usage conditions
Maintenance

End of life (C1-C4)

Scenario information Value Unit
Amount of diesel consumed for dismantling 252 Liter
Collected separately 2.025 kg
For energy recovery 2.025 kg
Type of fuel Diesel -
LKW Euro 6, 34-40 t
Vehicle type -
Total weight
Transportation distance 100 km

Re-use, recovery and recycling potential (D)

Scenario information/Materiel Value Unit
Net flow in module D 2.025 kg
Electrical efficiency of the system 25,9 %
Thermal efficiency of the system 11,1 %

MD-24015-EN | SAERTEX multiCom GmbH | page 19 of 21

Indoor air Soil and water

The product considered in this study is installed The EPD does not contain any information on the
exclusively underground and is therefore not release of hazardous substances into soil and
relevant for indoor air. water, as the horizontal standards for the
relevant measurements are not available.

MD-24015-EN | SAERTEX multiCom GmbH | page 20 of 21

References
Publisher

www.epddanmark.dk
Template version 2023.2

Programme operator Danish Technological Institute

Gregersensvej
DK-2630 Taastrup
www.teknologisk.dk

LCA-practitioner WESSLING Consulting Engineering GmbH & Co. KG

Oststraße 6, 48341 Altenberge
www.wessling-consulting-engineering.de

LCA software /background data Sphera GaBi

Database Version 2023.2
www.sphera.com

3rd party verifier Kim Christiansen

Kimconsult
www.kimconsult.dk

General programme instructions

General Programme Instructions, version 2.0, spring 2020
www.epddanmark.dk

EN 15804
DS/EN 15804 + A2:2019 – ”Sustainability of construction works – Environmental product declarations –
Core rules for the product category of construction products”.

EN 15942
DS/EN 15942:2021 – ”Sustainability of construction works – Environmental product declarations –
Communication format business-to-business”.

EN 15941
DS/EN 15941:2024 – ”Sustainability of construction works - Data quality for environmental assessment
of products and construction work - Selection and use of data”.

ISO 14025
DS/EN ISO 14025:2010 – ”Environmental labels and declarations – Type III environmental declarations –
Principles and procedures”

ISO 14040
DS/EN ISO 14040:2020 – ”Environmental management – Life cycle assessment – Principles and
framework”

ISO 14044
DS/EN ISO 14044:2020 – ”Environmental management – Life cycle assessment – Requirements and
guidelines”

MD-24015-EN | SAERTEX multiCom GmbH | page 21 of 21