Amplified Low Pressure Sensor Module
The M-AB001 series amplified pressure sensor is a new, extremely
low-pressure amplified product featuring the low pressure die. The
sensor is calibrated either as a gauge device with the zero at 0.5 Volts
and a full-scale span of 4.0 Volts or as a differential device with zero
at 2.5 Volts and a span of +/- 2 Volts. The gauge part is the M-AB001
while the differential part is the M-AB002.
The sensor is available in one of two standard port configuration.
The sensor corrects the sensor signal with a multi-point calibration
algorithm using a dedicated signal processor ASIC over temperature
and pressure. It provides the calibrated and compensated analog
output which enables the part to be used in stand-alone applications.
SPECIFICATIONS
Supply voltage VS 5.00 (4.50 ... 5.50 )VDC
Temperature ranges
Compensated 0 ... +70 °C
Operating -20 ... +80 °C
Storage -40 ... +80 °C
Pin Connection
1 +Vs Note:
2 GND 1. Port B -> High
3 Vout 2. Port A -> Low
Range Full-Scale Pressure 4 Vgate 3. Length -> 12.5 mm
2P5 0 ... 2.5 mBar / 0 ... 250 Pa 5,6,7,8 N/C 4. All dimensions are mm
5 0 ... 5 mBar / 0 ... 500 Pa
10 0 ... 10 mBar / 0 ... 1000 Pa M-AB00X-PPP
20 0 ... 20 mBar / 0 ... 2000 Pa Where: X = 1 for Gage or 2 for Differential
50 0 ... 50 mBar / 0 ... 5000 Pa PPP = Pressure Range
100 0 ... 100 mBar / 0 ... 10 kPa
Specification - Amplified Low Pressure Amplified Low Pressure Amplified Low Pressure
M-AB001 and M-AB002 Sensor - 2.5 mBar Sensor - 5.0 mBar Sensor - 10 mBar
Electrical Drive Min Nominal Max Unit Min Nominal Max Unit Min Nominal Max Unit
Supply Voltage 4.5 5,000 5.5 Volts 4.5 5 5.5 Volts 4.5 5 5.5 Volts
Supply Voltage Absolute Maximum 6 Volts 6 Volts 6 Volts
Supply Current 2.5 mA 2.5 mA 2.5 mA
Electrical Min Typical Max Min Typical Max Min Typical Max
ZERO
Zero at 25 C- M-AB001 0.4 0.52 0.6 Volts 0.42 0.51 0.58 Volts 0.42 0.51 0.58 Volts
Zero at 25 C -M-AB002 2.45 2.5 2.55 Volts 2.46 2.51 2.54 Volts 2.46 2.51 2.54 Volts
Zero Error at 25 C (% FS) -2.5 0.6 2.5 %FS -2 0.4 2 %FS -2 0.18 2 %FS
Zero Error: 0 to 50 C (% FS) -2.5 0.6 2.5 %FS -2.5 0.4 2.5 %FS -2.5 0.21 2.5 %FS
SPAN
Span at 25 C- M-AB001 3.9 3.98 4.1 Volts 3.9 3.99 4.1 Volts 3.92 3.99 4.08 Volts
Span at 25 C -M-AB002 1.95 1.99 2.05 Volts 1.95 1.99 2.05 Volts 1.96 2 2.04 Volts
Span Error at 25 C (% FS) -2.5 -0.5 2.5 %FS -2.5 -0.3 2.5 %FS -2 -0.28 2 %FS
Span Error: 0 to 50 C (% FS) -2.5 0.7 2.5 %FS -2.5 0.4 2.5 %FS -2 0.34 2 %FS
linearity -0.5 0.13 0.5 %FS -0.5 0.07 0.5 %FS -0.3 0.11 0.3 %FS
STABILITY Typical Typical Typical
Warm-up (1 hour after turn-on) 0.5 %FS 0.375 %FS 0.25 %FS
Position Sensitivity 0.125 %FS 0.076 %FS 0.035 %FS
Long-Term Drift (1 year) 0.75 %FS 625 %FS 0.375 %FS
Mechanical Pressure Min Typical Max Min Typical Max Min Typical Max
Full Scale Pressure Ranges 2.5 mBar 5 mBar 10 mBar
Overpressure - Burst >15X FS Pressure >15X FS Pressure >10X FS Pressure
Overpressure - Proof >10X FS Pressure >10X FS Pressure >5X FS Pressure
Specification - Amplified Low Pressure Amplified Low Pressure Amplified Low Pressure
M-AB001 and M-AB002 Sensor - 20 mBar Sensor - 50 mBar Sensor - 100 mBar
Electrical Drive Min Nominal Max Unit Min Nominal Max Unit Min Nominal Max Unit
Supply Voltage 4.5 5,000 5.5 Volts 4.5 5 5.5 Volts 4.5 5 5.5 Volts
Supply Voltage Absolute Maximum 6 Volts 6 Volts 6 Volts
Supply Current 2.5 mA 2.5 mA 2.5 mA
Electrical Min Typical Max Min Typical Max Min Typical Max
ZERO
Zero at 25 C- M-AB001 0.42 0.51 0.58 Volts 0.42 0.5 0.58 Volts 0.42 0.5 0.58 Volts
Zero at 25 C -M-AB002 2.46 2.51 2.54 Volts 2.46 2.5 2.54 Volts 2.46 2.5 2.54 Volts
Zero Error at 25 C (% FS) -2 0.34 2 %FS -2 0.04 2 %FS -2 0.06 2 %FS
Zero Error: 0 to 50 C (% FS) -2 0.22 2 %FS -2 0.26 2 %FS -2 0.26 2 %FS
SPAN
Span at 25 C- M-AB001 3.92 3.99 4.08 Volts 3.92 3.99 4.08 Volts 3.92 3.99 4.08 Volts
Span at 25 C -M-AB002 1.96 1.99 2.04 Volts 1.96 2 2.04 Volts 1.96 2 2.04 Volts
Span Error at 25 C (% FS) -2 -0.27 2 %FS -2 -0.22 2 %FS -2 -0.17 2 %FS
Span Error: 0 to 50 C (% FS) -2 0.29 2 %FS -2 0.28 2 %FS -2 0.26 2 %FS
linearity -0.3 0.66 0.3 %FS -0.3 0.12 0.3 %FS -0.3 0.09 0.3 %FS
STABILITY Typical Typical Typical
Warm-up (1 hour after turn-on) 0.25 %FS 0.25 %FS 0.25 %FS
Position Sensitivity 0.0175 %FS 0.0117 %FS 0.007 %FS
Long-Term Drift (1 year) 0.25 %FS 0.25 %FS 0.25 %FS
Mechanical Pressure Min Typical Max Min Typical Max Min Typical Max
Full Scale Pressure Ranges 20 mBar 50 mBar 100 mBar
Overpressure - Burst >10X FS >10X FS >10X FS
Overpressure - Proof >5X Pressure
FS >5X Pressure
FS >5X Pressure
FS
Pressure Pressure Pressure
77,Nowon-ro, Buk-gu, Daegu, Korea 41496
TEL : +82(53) 710 7180∽3 FAX : +82(53) 710 7185
Home Page : www.mentech.co.kr
