MULTI-RIB/R-PANEL

Multi-Rib R-Panel
12” Multi-Rib Roofs & Walls 12” R-Panel Roofs & Walls
( With Purlin Bearing Leg ) ( With Purlin Bearing Leg )
1.1875” 1.25”
36” Cover Width 36” Cover Width

12” Multi-Rib Walls Only 12” R-Panel Walls Only

( Without Purlin Bearing Leg ) ( Without Purlin Bearing Leg )
1.1875” 1.25”

36” Cover Width 36” Cover Width

Multi-Rib and R-Panel Load Tables and Section Properties

For any available Test Data, Section Properties or Load Tables, please visit www.mcelroymetal.com. For additional
information, please contact the McElroy Engineering Department at 1-800-950-9082.

Details: Panel Options:

- Minimum slope: 1:12 (with sealant) - Roof panels: purlin bearing leg required
- Wall panels: non-purlin bearing leg optional
- Multi-Rib is also available with MoistureLok
- Coating:
- Kynar 500® (PVDF)
- Silicone Modified Polyester (SMP)

- Substrate:
- Standard 26 GA Galvalume® (roof and wall panels)
- Multi-Rib: optional 24, 22 GA Galvalume (wall panels)
- R-Panel: optional 24, 22 GA Galvalume (wall panels only)
Notes:
- Oil canning is inherent in all metal panels and is not cause for panel rejection.
- Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a
McElroy Metal color chart.
- Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroyÊs
1
website at www.mcelroymetal.com.
 MULTI-COR/M-COR

Multi-Cor M-Cor

Multi-Cor Panel M-Cor Panel

2.67” 2.67”

.875” .5”

32” Cover Width for Roofing and Siding 34.67” Cover Width for Roofing and Siding

Multi-Cor and M-Cor Load Tables and Section Properties

For any available Test Data, Section Properties or Load Tables, please visit www.mcelroymetal.com. For additional
information, please contact the McElroy Engineering Department at 1-800-950-9082.

Details: Panel Options:

- Multi-Cor minimum slope: 1:12 - Coating:
- M-Cor minimum slope: 1:12 - Kynar 500® (PVDF)
- Tape sealant required on all slopes - Silicone Modified Polyester (SMP)
- Can be installed over solid deck or open framing
- Substrate:
- Standard 26 GA Galvalume®
- Multi-Cor and M-Cor are produced in Bossier City, LA
- Optional 24, 22 GA Galvalume (Multi-Cor)
- Optional 29, 24 GA Galvalume (M-Cor)

Notes:
- Oil canning is inherent in all metal panels and is not cause for panel rejection.
- Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a
McElroy Metal color chart.
- Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroyÊs
website at www.mcelroymetal.com.

2
 U-PANEL
U-PANEL PURLIN BEARING PROFILE

6” (typ.)

.734375”

36” Cover Width

U-Panel Master Coil Width: 43”

U-PANEL NON- PURLIN BEARING PROFILE U-PANEL NON- PURLIN BEARING PROFILE

6” (typ.) 6” (typ.)

.734375” .734375”

36” Cover Width 36” Cover Width

Master Coil Width: 40 7/8” (29 GA Only) Master Coil Width: 41 9/16”

U-Panel Load Tables and Section Properties

For any available Test Data, Section Properties or Load Tables, please visit www.mcelroymetal.com. For additional
information, please contact the McElroy Engineering Department at 1-800-950-9082.

Details: Panel Options:

- Minimum slope: 1:12 (with sealant) - Roof panels: purlin bearing leg required
- Wall panels: non-purlin bearing leg optional

- Coating:
- Kynar 500® (PVDF)
- Silicone Modified Polyester (SMP)

- Substrate:
- Standard 26 GA Galvalume®
(roof and wall panels)
- Optional 29, 24, 22 GA Galvalume
(wall panels)
Notes:
- Oil canning is inherent in all metal panels and is not cause for panel rejection.
- Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a
McElroy Metal color chart.
- Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroyÊs
website at www.mcelroymetal.com.
3
 MULTI-V/MINI-RIB

Multi-V Mini-Rib

Multi-V Panel Mini-Rib Panel

12” (Nom.) 3”

1.1875” .375”

35 3/4” Cover Width 36” Cover Width

Multi-V and Mini-Rib Load Tables and Section Properties

For any available Test Data, Section Properties or Load Tables, please visit www.mcelroymetal.com. For additional
information, please contact the McElroy Engineering Department at 1-800-950-9082.

Details: Panel Options:

- Multi-V is to be used as a wall panel only - Coating:
- Kynar 500® (PVDF)
- Mini-Rib is not applicable for exterior roof panels - Silicone Modified Polyester (SMP)

- Substrate:
- Mini-Rib is produced in Bossier City, LA
- Multi-V
- Standard 26 GA Galvalume®
- Optional 24 GA Galvalume

- Mini-Rib
- Standard 26 and 29 GA Galvalume®
- Optional 24 GA Galvalume
Notes:
- Oil canning is inherent in all metal panels and is not cause for panel rejection.
- Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a
McElroy Metal color chart.
- Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroyÊs
website at www.mcelroymetal.com.
4
 MULTI-RIB/R-PANEL
TRIM 26 GA
Simple Base Trim Base Trim Zee Trim
ITBD ITBT 1 3/4” ITZF 1 3/4”
Color Side
Color Side Color Side

1 3/4” 2 5/8” 1 1/2”

2 3/4”
3/4”
2”

Lengths: 2 5/8” Lengths: Lengths:

1” 10ʼ - 3” 10ʼ - 3”
10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Masonry Wainscoat Alternate Masonry Wainscoat Outside Corner

ITMW ITAMW ITOC 1 3/4”
4 1/2” 1”
Color Side Color
Color Side 1 1/2” 1 1/2” Side
3 1/2” 1”
4”

2” 95° 85° 2” Lengths:

Lengths: 10ʼ - 3” Lengths:
10ʼ - 3” 14ʼ - 3” 4” 10ʼ - 3”
1/2” 20ʼ - 3” 1 3 / 4 ” 14ʼ - 3”
14ʼ - 3”

Inside Corner Outside Angle Trim Inside Angle Trim

1 3/4”
ITIC ITOA ITIA Color Side
1” Color Side
3” 3”
4” 1 3/4”

Lengths: Lengths: Lengths:

4” 10ʼ - 3” 3” 10ʼ - 3” 10ʼ - 3”
Color Side 3”
1” 14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Jamb Trim Head Trim Mini Jamb / Header Cover

ITJT ITHT ITMHJ
Lengths:
2” 4” 7ʼ - 1”
Color Side
8ʼ - 1”
Color Side
2 1/2” 2 1/4” 9ʼ - 1”
1/2”
1” 1” Jamb / Head Cover Trim
ITHJ
2 7/16”
Lengths: Lengths: Lengths:
1 1/4” 10ʼ - 3” 1 1/2” 10ʼ - 3” 10ʼ - 3”
Color Side
14ʼ - 3” 14ʼ - 3” Color Side 8 1/8” 14ʼ - 3”

Eave Trim* 12” Sculptured Eave Trim* 12” Rake Trim

ITET * ITSCE
3 3/8”
* ITRT
6” Color Side
3”
Color Side Color Side 1 3/4”

2 1/8” 3 1/2”
2”
3 1/2” 1”
1/2” 3 1/2”
Lengths:
Lengths: 3 1/2” Lengths: 2” 10ʼ - 3”
10ʼ - 3” 2” 10ʼ - 3” 14ʼ - 3”
1/2” 14ʼ - 3” 14ʼ - 3” 20ʼ - 3”

Rake Tie-In Trim Rake Closure High Side Eave Trim* 12”
ITEW ITREC ITHS *
Color Side
5 1/4”
3 1/2” 8 3/4” Color Side
Color
6 3/4” Side
2 1/2” 1” 3 1/2”
Up
3 1/2” 2”
3 1/2” Lengths:
1 3/4” Lengths: 10ʼ - 3”
10ʼ - 3” 2” 14ʼ - 3”
14ʼ - 3” 2” 1”
20ʼ - 3”
5
*specify roof pitch
 MULTI-RIB/R-PANEL
TRIM 26 GA
High Side Tie-In Trim* 12” Ridge Cap* 12” Multi-Rib Formed 12”
ITSW * ITRC * Ridge Cap* *
MRC
Color Side Color Side
11 1 / 2 ” 11 1 / 2 ”
2 1/2”

15” 15”
6 1/4” Lengths: Lengths: or or
10ʼ - 3” 10ʼ - 3” 18” 18”
14ʼ - 3” 14ʼ - 3”

R-Panel Formed 12” Fixed Peak Box* 12” Variable Peak Box
Ridge Cap* * (Additional Roof Pitch * IT-PBV 2ʼ Color Side
RRC Available)
IT-PBF 2ʼ
1ʼ - 8” Field bend
Color Side Field cut as
required for pitch

15” 15”
or or 6 7/8”
18” 18”
Field cut as
Lengths: required for pitch
1ʼ - 8”

Outside Corner Box for Standard Gutter Gutter Corner Box For Standard Gutter High Side Corner Box
(Right Hand Shown Left Hand Opposite) 2:12 to 4:12 or with Sculptured Gutter (Right Hand Shown Left Hand Opposite)
IT-OCB (Right Hand Shown Left Hand Opposite) ITHSCB
10” ITGCB
6 1/2” 10” 8”
10”
3”
3 1/4” 4”
1” 3”
2”
2” 2”

4” 4 1/4”
1 / 2 :12 up to 2:12 roof slopes with standard gutter.

Standard Gutter* Standard Gutter* 12” Sculptured Gutter* 12”

1/2:12 to 2:12 Pitch 2:12 to 4:12 Pitch * up to 4:12 Pitch *
ITSG2 ITSG4 3/4” ITSCG Color Side 1 1 / 4 ”
3/4” 7/8” 3 1/4”
Color Side 7/8”
Varies
with
3 1/2” 3 5/8”
Pitch
5 5/8” Varies
5 3/8” with
Color Pitch
3 1/2” Side
2 3/4” 3 1/2”
Lengths: Lengths: Lengths:
4” 10ʼ - 3” 4” 10ʼ - 3” 4” 10ʼ - 3”
Snow guards required to prevent 14ʼ - 3” Snow guards required to prevent 14ʼ - 3” Snow guards required to prevent 14ʼ - 3”
damage caused by sliding snow. 20ʼ - 3” damage caused by sliding snow. 20ʼ - 3” damage caused by sliding snow. 20ʼ - 3”

Gutter Strap Standard Gutter End Cap Standard Gutter End Cap
IT-GS (Right Hand Shown Left Hand Opposite) 2:12 to 4:12 Pitch
1/2 to 2:12 Pitch ITSGEC4
Color Side 1”
ITSGEC2 4 13/16”
1 5/8” 4 15/16”
1 1/8”
1 15/16”
15/ 16” 15/ 16”
Color
Color 4 3/8”
4 3/8” Side Up
Side Up
3 1/2” 2 11 / 1 6 ”

Lengths:
0ʼ - 6” 3 15/16” 3 15/16”
6
*specify roof pitch
 MULTI-RIB/R-PANEL
TRIM 26 GA

Sculptured Gutter End Cap 3” x 4” Downspout 3” Downspout 3” x 4”

(Right Hand Shown Left Hand Opposite) Elbow A-Style BBPDS 4”
ISGEC BBPELA
4 3/4” 1”
3”

2 11 / 1 6 ” 9.5”
Color 3”
Side Up 5 1/2”

3 1/2” 14ʼ 3”

4”
3 15/16” 8.5”

Aluminum Downspout Outlet Downspout Strap

3”
BBPOUT 4 3/4” BBPDSS
10”

1 3/8” Lengths: Lengths:

10” 14ʼ - 3”

Lock-Seam Downspout Outlet - Lock-Seam Downspout - Center Lock-Seam Downspout Strap

Standard
1” 5 7/8” 4”

1” 3 7/8”
3 3/8” 95° 95° Color Side
3 3/8” 3 3/8”
1” 3 1/2”
3”
Color Side
4 1/4”
2” 2 1/2”

Lock-Seam Downspout - Corner Skylight Side Trim - UL90 Skylight Side Trim - UL90
(Right Hand Corner Shown) (For Use with Multi-RIb Panels) (For Use with R-Panels)
4” 1 3/8” 1 1/8”
1 3/8” 1 5/8” Color Side
Color Side
Color Side
3 1/2”

1/2” Lengths: 1/2” Lengths:

Please specify left or right hand corner 1 1/2” 10ʼ - 3” 1 3/8” 10ʼ - 3”

MULTI-COR/M-COR
TRIM 26 GA
Simple Base Trim Base Trim Masonry Wainscoat
CORSB CORBT CORMW
1” 1”
4 1/2”
Color Side Color Side Color Side
3” 3 1/2”
3”

3/4”
2” 95° 85°
1 1/2” 1”
Lengths: Lengths: Lengths:
10ʼ - 3” 10ʼ - 3” 1/2” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”
7
*specify roof pitch
 MULTI-COR/M-COR
TRIM 26 GA
Outside Angle Trim Head / Jamb Trim (M-Cor Only) Jamb Trim (Multi-Cor / U-Panel Only)
COROA MCORHJ CORJT
2 1/4”
2 1/8” Color Side
3”
5/8” 7/8” 1/2”

Lengths: Lengths: Lengths:

Color Side 3” 10ʼ - 3” 10ʼ - 3” 10ʼ - 3”
7/8”
14ʼ - 3” 14ʼ - 3” 3/4” 14ʼ - 3”

Head Trim (Multi-Cor / U-Panel Only) Jamb / Head Cover Trim Eave Trim* 12”
CORHT ITHJ CORET *
3”

2 3/4” Color Side

2 7/16”
1”
3 1/2”
8 1/8”
Lengths: Lengths: Lengths:
1” 10ʼ - 3” Color Side
10ʼ - 3” 10ʼ - 3”
Color Side 1/2”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Rake Trim Rake-Tie-In High Side Eave Trim* 12”

CORRT COREW CORHS *
5”
Color Side
4 5/8”
Color Side
2 5/8” Color Side
4 3/8” 4 3/4”
5/8”
Lengths: Lengths: 5/8” Lengths:
10ʼ - 3” 3 7/8” 10ʼ - 3” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

High Side Tie-In Trim* 12” Ridge Cap* 12” Gutter Strap
* 10”
CORSW CORRF
Color
* COR-GS
Color Side 11 1 / 2 ” 11 1 / 2 ” Side

Lengths: 1”
2 1/2” 10ʼ - 3” Lengths:
14ʼ - 3” 10”
Lengths:
7ʼ - 1” Gutter* 12” Gutter End Cap
6 1/4”
8ʼ - 1” CORGT * CORGEC
1” 4 7/8”
9ʼ - 1” 4 1/4”

Downspout 3” x 4” 4” 1 7/16”
BBPDS 1 1/2” 4 15/16”
5” 3 1/2”
3 1/2”
Lengths:
10ʼ - 3”
14ʼ - 3” 3 7/8”
Color
4”
Side 20ʼ - 3”

3” x 4” Downspout Elbow A-Style Aluminum Downspout Outlet

BBPELA BBPOUT
14ʼ 3” 3”
4 3/4”

3” 1 3/8”
4”
9.5”
3” 3”
Downspout Strap
BBPDSS 10”

Lengths: Lengths:
8.5”
14ʼ - 3” 10”
8
*specify roof pitch
 U-PANEL
TRIM 26 GA
Simple Base Trim Base Trim 1” Zee Flashing
U-SB 1” U-BT U-ZF 1”

Color Side Color Side 3” Color Side

1 3/4”
3”

3/4” 2”
Lengths: 1” Lengths: Lengths:
1 1/2”
10ʼ - 3” 10ʼ - 3” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Masonry Wainscoat Outside Corner Inside Corner

U-MW U-OC U-IC 1 1/16”
4 1/2” 1 1/16” 1” 3/4”
Color Side Color Side
3 1/2” 1”
5 3/4”
3 3/16” 1 1/16” 1 1/16”
2” 95° 85°

Lengths: Lengths: Lengths:

10ʼ - 3” 3 3/16” 1 1/8” 10ʼ - 3”
Color Side 10ʼ - 3”
1/2” 14ʼ - 3” 14ʼ - 3” 3/4” 14ʼ - 3”

Outside Angle Trim Inside Angle Trim Jamb Trim

U-OA U-IA U-JT
1/2”
Color Side
2 1/4”
3” 3”

3/4”

Lengths: Lengths: Lengths:

Color Side 3” 10ʼ - 3” 10ʼ - 3” Color 10ʼ - 3”
3” 7/8”
14ʼ - 3” 14ʼ - 3” Side 14ʼ - 3”

Head Trim Eave Trim* 12” Sculptured Eave Trim* 12”

U-HT U-EF 3” * U-SE *
3 13/16”

2 3/4”
2 11 / 1 6 ”
1” 3 1/2” 1/2”

Lengths: Lengths: 3 1/2” Lengths:

Color
1” Side 10ʼ - 3” Color Side 10ʼ - 3” 10ʼ - 3”
2”
14ʼ - 3” 1/2” 14ʼ - 3” 14ʼ - 3”

Rake Trim Rake Tie-In Trim Rake Closure

U-RT 5 1/4” U-EW U-RC
1 1/16” 2 1/2” 3 1/2”
Color Side
3 1/2”
6 3/4”
2”
2 7/16” 1 1/16”
1” 3 1/2” 3 1/2”
2”
Lengths: Lengths:
10ʼ - 3” 10ʼ - 3”
Color Side 1” 2” 1”
14ʼ - 3” 14ʼ - 3” Color Side Up

High Side Eave Trim* 12” High Side Tie-In Trim* 12” Ridge Cap* 12”
U-HS * U-SW * U-RC *
Color Side
8 3/4” Color Side

3 1/2” 11 1 / 2 ” 11 1 / 2 ”
2 1/2”
2” Color Side
3 1/2”
Lengths: 6 1/4” Lengths: Lengths:
2” 10ʼ - 3” 10ʼ - 3” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”
9
*specify roof pitch H Indicates an open hem - All other hems are closed.
 U-PANEL
TRIM 26 GA
Formed Ridge Cap* 12” Fixed Peak Box* 12” Outside Corner Box for Standard Gutter
URC * (Additional Roof Pitch * (Right Hand Shown Left Hand Opposite)
Available) U-OCB
U-PB 10”
10”
Color Side 1ʼ - 8”

1” 3”
2”

6 7/8”
18” 18”

Lengths: 4”
1ʼ - 8” 1 / 2 :12 up to 2:12 roof slopes with standard gutter.

Gutter Corner Box For Standard Gutter High Side Corner Box Gutter
2:12 to 4:12 or with Sculptured Gutter (Right Hand Shown Left Hand Opposite) U-GT
(Right Hand Shown Left Hand Opposite) U-HSC 5/8”
U-GCB 7/8”
6 1/2” 10” 8”
3 1/2”
3”
3 1/4” 4”
5 7/8”
2”
3 1/2”
2”

4”
4 1/4” Color Side Lengths:
10ʼ - 3”
14ʼ - 3”

Sculptured Gutter Gutter End Cap Gutter End Cap

U-SG 7/8” UGEC5 Sculptured 4 9/16”
3 1/4” 4 13/16” UGECT
1 5/8”
5” 3 5/16”

Color 6” Color
6 7/8” 4 7/8” Side Up
Color Side Side Up
3 7/16”
3 1/2” 3 7/16”
Lengths:
4” 10ʼ - 3” 3 15/16”
1” 3 15/16”
14ʼ - 3”

Gutter Strap Aluminium Downspout Outlet Downspout

U-GS BBPOUT BBPDS 4”

Color Side
1 1/8” 4 3/4”

15/16” 1 3/8”
°
45

Lengths:
0ʼ - 6”
14ʼ 3”
Downspout Strap A-Style Elbow
BBPDSS BBPELA 3”

3”
4”
10” 9.5”
3”
3”

8.5” Lengths:
14ʼ - 3”
10
*specify roof pitch H Indicates an open hem - All other hems are closed.
 MULTI-V
TRIM 26 GA
Simple Base Trim Base Trim 1 3/4”
Masonry Wainscoat
ITBD ITBT ITMW
4 1/2”
Color Side
Color Side Color Side
2 3/4” 2 5/8” 3 1/2”
3/4”

2” 95° 85°
Lengths: 2 5/8” 1” Lengths: Lengths:
1 3/4”
10ʼ - 3” 10ʼ - 3” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 1/2” 14ʼ - 3”

Alternate Masonry Wainscoat Multi-V Outside Corner Outside Angle Trim

ITAMW MUVOC ITOA
1 3/4”
1”
1 1/2” Color Side
Color Side 1 1/2” 1”
3”
5 1/2”

2” Lengths:
1 3/4”
10ʼ - 3” Lengths: 3” Lengths:
5 1/2” Color Side
14ʼ - 3” 10ʼ - 3” 10ʼ - 3”
20ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Inside Angle Trim Jamb Trim Head Trim

ITIA ITJT ITHT
Color Side 2 1/4”
2 1/2” 1/2”
1”
3”
Color Side 1”
1 1/2”
Color Side
Lengths: Lengths: Lengths:
1 1/4”
3” 10ʼ - 3” 10ʼ - 3” 10ʼ - 3”
14ʼ - 3” 14ʼ - 3” 14ʼ - 3”

Jamb / Head Cover Trim

ITHJ

2 7/16”

8 1/8”
Lengths:
Color Side 10ʼ - 3”
14ʼ - 3”

MINI-RIB
TRIM
Inside Angle Trim Outside Angle Trim
ITIA ITOA
Color Side

3” 3”

Lengths: Lengths:
3” 10ʼ - 3” 3” 10ʼ - 3”
Color Side
14ʼ - 3” 14ʼ - 3”
11
*specify roof pitch
 MULTI-RIB / R-PANEL / MULTI-COR
M-COR / U-PANEL / MULTI-V / MINI-RIB
ACCESSORIES
1/4 - 14 x 1 1/4” 1/4 - 14 x 7/8” #14 x 1 1/2”
TEK2 ZAC Self-Driller LAPTEK ZAC Self-Driller Type AB ZAC
(Part # varies by color) (Part # varies by color) (Part # varies by color)

#12 - 14 x 1 1/4” #12 - 14 x 1 1/4” 1/4 - 14 x 7/8”

TEK2 HWH w/washer TEK2 ZAC LAPTEK HWH w/washer
Self-Driller Self-Driller Self-Driller
(Part # varies by color) (Part # varies by color) (Part # varies by color)

#9 - 15 Type A Woodgrip #10 - 15 Woodgrip 43D Pop rivets

W/Washer HILO ZAC (Part # varies by color)
(Part # varies by color) (Part # varies by Color)
Lengths:
1”
1 1/2”
2”
2 1/2”

Touch-Up Paint Pen Roll Tape Sealant Roll Tape Sealant

(Part # varies by color) 3/32” X 1” X 45ʼ 1/8” x 1” x 30ʼ
Item #: 95335 Item #: 95345

White Urethane Sealant Titebond Caulk Sealant Butyl Tube Sealant

Item #: 95320 (Part # varies by color) Item #: 95342

Multi-Rib Outside Closure R-Panel Outside Closure Multi-V Outside Closure

With Adhesive: 95059 With Adhesive: 81887 95099
Without Adhesive: 95057 Without Adhesive: 95085

Multi-Rib Inside Closure R-Panel Inside Closure Multi-V Inside Closure

With Adhesive: 95058 With Adhesive: 81886 95097
Without Adhesive: 95054 Without Adhesive: 95080

Mini-RIb Closure Multi-Cor Closure M-Cor Closure

95151 95031 95011

12
Images not drawn to scale.
 MULTI-RIB / R-PANEL / MULTI-COR
M-COR / U-PANEL / MULTI-V / MINI-RIB
ACCESSORIES
Multi-Rib Fiberglass Panel R-Panel Fiberglass Panel U-Panel Fiberglass Panel
Available in Clear, White and Opal Item #: 91235 37 3/8” X 12ʼ
11ʼ - 91201 Item #: 91212
12ʼ - 91207
16ʼ - 91218

Lengths:
11ʼ

Sunsky Clear Polycarbonate Panel Sunsky Clear Polycarbonate Panel

(For MULTI-RIB) (For R-PANEL)
Available in Clear and White Available in Clear and White

Lengths: Lengths:
8ʼ 8ʼ
10ʼ 10ʼ
Not inventoried at all locations. 12ʼ Not inventoried at all locations. 12ʼ

Notes:

13
Images not drawn to scale.