NATIONAL INSTITUTE OF TECHNOLOGY MANIPUR
Langol, Imphal West, Manipur - 795004
(An Autonomous Institute under the Ministry of Education, Govt. of India)
A PRACTICAL FILE
ON
FLUID MECHANICS AND TURBOMACHINARY LABORATORY
(ME 236)
Submitted to:
DEPARTMENT OF MECHANICAL ENGINEERING,
NATIONAL INSTITUTE OF TECHNOLOGY MANIPUR
Submitted by:
Name of the Student : ……………………………………………………..
Enrolment Number : ……………………………………………………..
Semester & Year : IV Semester & 2rd Year
Academic Session : ……………………………………………………..
DEPARTMENT OF MECHANICAL ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY MANIPUR
Langol, Imphal West, Manipur - 795004
(An Autonomous Institute under the Ministry of Education, Govt. of India)
Bonafide Certificate
Certified that this is a Bonafide record of the practical work done by
…………………………………………………………………… bearing Enrolment
number ……………………… of IV Semester (2rd Year) B.Tech. Mechanical
Engineering in the FLUID MECHANICS & TURBOMACHINERY
LABORATORY (ME 236) during the academic year session of May
………………..
He/ She has completed the prescribed list of experiments of the laboratory
and is found to be provisionally eligible to appear for the End Semester
Laboratory Examination.
(Mr. T. Satyajit Singh) ( Dr. Ashutosh Kumar)
Lab. In-charge, TE Laboratory Faculty In-charge, TE Laboratory
Technical Assistant, Assistant Professor, Department of
Mechanical Engineering Department of Mechanical Engineering
National Institute of Technology Manipur National Institute of Technology -
795004 Manipur - 795004
Submitted for End Semester Practical Examination and viva-voce held on
… .............................. in the Department of Mechanical Engineering, NIT Manipur.
DEPARTMENT OF MECHANICAL
ENGINEERING
NATIONAL INSTITUTE OF TECHNOLOGY
MANIPUR
Langol, Imphal West, Manipur - 795004
FLUID MECHANICS &TURBOMECHINARY LABORATORY(ME 236)
PRACTICAL INDEX
Expt. Date of Page Signature of
Name of the Experiment Experiment Number Lab In-Charge
No
To determine the coefficient of
1. discharge of Orifice meter.
To determine the coefficient of
discharge (Cd) of a venturimeter
2.
using pressure and discharge
readings.
To demonstrate and verify
3. Bernoulli's Theorem using a
Venturi nozzle setup.
4. To determine the type of flow
(laminar or turbulent) using a
Pitot tube.
Determination of Head Loss (h)
5. Due to Friction in Pipe Flow.
6. To determine the coefficient of
discharge (Cd) of a rectangular
notch.
7. To determine the efficiency of a
Hydraulic Ram Pump.
To determine the force exerted
8. by the jet on the vertical
stationary plate.
To determine the Power Output
9. and Efficiency of a Pelton
Turbine.
(Signature of the Student with date)
(Mr. T. Satyajit Singh)
Lab. In-charge, TE Laboratory
Technical Assistant,
Department of Mechanical Engineering
National Institute of Technology Manipur - 795004
