ANNEXURE-I

TECHNICAL SPECIFICATION

3KVA UPS SYSTEM WITH 12V BATTERY BANK (ITEM CODE 1600055767)
PARAMETER SPECIFICATION DESCRIPTION

Input Voltage : 230 VAC

Input Frequency : 50 Hz, +/- 3%

Harmonic
: < 10%
Distortion (Current)

INPUT Power Factor : >/=0.90

Rectifier Type : PWM with IGBT

Load should be isolated by providing inbuilt

Isolation : input isolation transformer at the input of UPS
System & the same should be inbuilt in the
UPS cubicle.
Rated output capacity : 3KVA, Single Phase output

Output Voltage on
: 230 V AC Single phase +/- 1%
Battery

Output Frequency : 50 Hz + 0.1 Hz

UPS
: On line/fully digitalized microprocessor
Design controlled
Technology
Output Wave form : Pure sine wave

1) for step load change of 0 % - 100 % and

OUTPUT 100% - 0
Transient Response %
:
2) Output remains within 5 % and recovers
within 5 m Sec.
Automatic front turn on, constant voltage,
Rectifier Charger :
constant current type

Output wave form : Pure Sine wave

Output Connections : Hard Wire 3-wire (1PH + N + G), at least 2

outputs
 Harmonic < 3% (linear load)
:
Distortion (THD) < 5% (non-linear load)

1) = 104 % Continues

Over load capacity 2) >=120 % for 10 Min

:
3) >=150 % for 10 sec

Short
: Yes
Circuit
PROTECTION
Protection
Over Voltage : Yes

Under
: Yes
Voltage
Protection
Over
: Yes
temperature
protection
Short Circuit : Yes
protection
Input / Output Voltage, Input / output
Frequency, Online Mode, Backup mode,
LCD Indicator
Battery capacity, Load Level, Inside
DISPLAY : Temperature, Fault Status, Fault History (10
Records)
Rectifier I/P, Bypass I/P, O/P, Online Mode,
LED Indicator Backup Mode, Bypass Mode, Battery
: Charging Indication, Battery Low Indication

AUDIBLE Battery Low , Mains Failure, Over

Alarm conditions :
ALARM temperature, Inverter Overload

Battery Type : SMF or VRLA

Each Battery Voltage : 12V each

Period of Backup : 240 min ( 4 Hours) on 100% load

Suitable corrosion resistant battery racks

Battery Housing
: and cable supports etc shall be provided.
BATTERY
 BANK Built-in solid state float-cum-equalizing
Charger charger with automatic boost /trickle charge
: modes with current limiting features

Temperature
: Required
Compensation

Isolation : DC-rated circuit breaker, provides protection

Switch/Breaker and
servicing isolation

Operating : 0º C - 40º C
ENVIRONMENT Temperature
Altitude : 1500 Meters

Relative humidity : Up to 95 % Non-Condensing

Air : Dusty

WARRANTY Warranty for UPS(on

AND site comprehensive 3
SERVICES warranty) in years

Warranty for
Batteries(replacement 2
warranty) in years

CERTIFICATION ISO certification

Damp Heat Test

Device Certification is required i.e.
Dry Heat Test certification for both UPS and Batteries are
required
Cold Test

Availability of the type

test report from
central Test Certificate for the complete device
Govt./NABL/ILAC set i.e. for both UPS and Batteries are
accredited lab required.
covering all technical
requirements.
Bypass switch : Automatic & Manual bypass switch
Original Manuals in 3 sets and
Manuals &CDs :
Installation/drivers
CD to be submitted with UPS
TERMS AND CONDITIONS:

1. Design, manufacture, supply, erection and commissioning of 3KVA on line UPS

system with battery bank
2. Relevant product catalogue for ups, batteries and schematic layout of battery bank
shall be submitted along with the offer.
3. Calculation sheet for designing 4 hours (240 min) battery backup with full load
shall be submitted by the bidders
4. Successful bidder shall submit the GA drawing and electrical drawing of 3 KVA
UPS system for approval before supplying the item.
 ANNEXURE-II
TECHNICAL SPECIFICATION CUM CHECKLIST OF

3KVA UPS SYSTEM WITH 12V BATTERY BANK (ITEM CODE 1600055767)
PARAMETER SPECIFICATION DESCRIPTION Remark to be
filled by tenderer
Input Voltage : 230 VAC 230 VAC

Input Frequency : 50 Hz, +/- 3% 50 Hz, +/- 3%

Harmonic < 10%

: < 10%
Distortion (Current)

INPUT Power Factor : >/=0.90 >/=0.90

Rectifier Type : PWM with IGBT PWM with IGBT

Load should be isolated by Load should be isolated

Isolation : providing inbuilt input by providing inbuilt
input isolation
isolation transformer at the
transformer at the
input of UPS System & the input of UPS System &
same should be inbuilt in the same should be
the UPS cubicle. inbuilt in the UPS cubicle.
Rated output capacity : 3KVA, Single Phase output 3KVA,
Single Phase output
Output Voltage on 230 V AC
: 230 V AC Single phase +/-
Battery Single phase +/- 1%
1%
Output Frequency : 50 Hz + 0.1 Hz 50 Hz + 0.1 Hz

UPS On line/fully digitalized

: On line/fully digitalized microprocessor
Design microprocessor controlled controlled
Technology
Output Wave form : Pure sine wave Pure sine wave

3) for step load change of 0 3) for step load change

OUTPUT % - 100 % and 100% - 0 of 0% - 100 % and
Transient Response % 100% - 0 %
: 4) Output remains
4) Output remains within 5 within 5% and
recovers within 5m
% and recovers within 5
Sec.
m Sec.
Automatic front turn on, Automatic front turn
Rectifier Charger :
constant voltage, constant on, constant voltage,
current type constant current type
 Output wave form : Pure Sine wave Pure Sine wave
Output Connections : Hard Wire 3-wire (1PH + N Hard Wire 3-wire (1PH
+ G), at least 2 outputs +N+G), at least 2 outputs
Harmonic < 3% (linear load)
: < 3% (linear load)
Distortion (THD) < 5% (non-linear load) < 5% (non-linear load)

1) = 104 % Continues Remark to be

filled by
Over load capacity 4) >=120 % for 10 Min tenderer
:
5) >=150 % for 10 sec

Short
: Yes YES
Circuit
PROTECTION
Protection
Over Voltage : Yes YES

Under
: Yes YES
Voltage
Protection
Over
: Yes YES
temperature
protection
Short Circuit : Yes YES
protection
Input / Output Voltage,
Input / output Frequency,
LCD Indicator
Online Mode, Backup
DISPLAY : mode, Battery capacity,
Load Level, Inside
Temperature, Fault Status,
Comply
Fault History (10 Records)
Rectifier I/P, Bypass I/P,
LED Indicator O/P, Online Mode, Backup
: Mode, Bypass Mode,
Battery Charging Comply
Indication, Battery Low
Indication
AUDIBLE Battery Low , Mains Failure,
Alarm conditions : Comply
ALARM Over temperature, Inverter
Overload
Battery Type : SMF or VRLA SMF or VRLA
 Each Battery Voltage : 12V each
12V each
Period of Backup : 240 min ( 4 Hours) on 100% 240 min ( 4 Hours)
load on 100% oad
Suitable corrosion resistant
Battery Housing
: battery racks and cable Comply
BATTERY supports etc shall be
BANK provided.
Built-in solid state float-cum-
Charger equalizing charger with Comply
: automatic boost /trickle
charge modes with current
limiting features
Temperature
: Required Comply
Compensation

Isolation : DC-rated circuit breaker,

Switch/Breaker provides protection and Comply
servicing isolation

Operating : 0º C - 40º C Remark to be

ENVIRONMENT Temperature filled by tenderer
Altitude : 1500 Meters
1500 Meters
Relative humidity : Up to 95 % Non- Up to 95 %
Condensing NonCondensing
Air : Dusty Dusty
WARRANTY Warranty for UPS(on
AND site comprehensive Comply
SERVICES warranty) in years

Warranty for
Batteries(replacement Comply
warranty) in years

CERTIFICATION ISO certification Comply

Damp Heat Test
Device Certification is Comply
Dry Heat Test required i.e. certification Comply
for both UPS and
Cold Test
Batteries are required Comply
 Availability of the type
test report from
central Test Certificate for the Comply
Govt./NABL/ILAC complete device set i.e.
accredited lab for both UPS and Batteries
covering all technical are required.
requirements.
Bypass switch : Automatic & Manual Comply
bypass switch
Original Manuals in 3 sets
Manuals &CDs :
and Installation/drivers Comply
CD to be submitted with
UPS

TERMS AND CONDITIONS:

1. Design, manufacture, supply, erection and commissioning of 3KVA on line UPS system
with battery bank
2. Relevant product catalogue for ups, batteries and schematic layout of battery bank shall
be submitted along with the offer.
3. Calculation sheet for designing 4 hours (240 min) battery backup with full load shall
be submitted by the bidders
4. Successful bidder shall submit the GA drawing and electrical drawing of 3 KVA UPS
system for approval before supplying the item.

APPLICABLE TAXES & (Please specify % IGST/CGST/SGST, if any)

DUTIES FOR COMPLETE ITEM
18% GST

6 DIGIT HSN CODE PLEASE MENTION THE HSN CODE OF

MINIMIMUM 06 DIGIT AT THE TIME OF 85044090
UPLOADING THE INVOICE IN GEM PORTAL
OHERWISE PAYMENT WILL NOT RELEASED.

SEAL& SIGNATURE BY TENDERER

 GEM/2025/B/5792451 Date ……..…..……….
GeM Bid Ref No. ……..…..………................ 09-01-2025

ANNEXURE-IV

(TECHNO-COMMERCIAL CHECK-LIST TO BE FILLED BY TENDERER)

(Please filled duly signed & Seal & attached as Separate Sheet along with offer)

SL. To be filled &

DESCRIPTION Remarks submitted by Bidder
No. (Compliance)

EMD - As per Clause # 1 of Annexure-III

Submitted/
1. Please attach the proof of EMD paid (Online RTGS/ Bank Guarantee).
Exemption -
EMD exemstion will be as per Tender clauses.

PRICE BASIS-Bacheli Complex (FOR Destiantion basis only)

2. Accepted Only Accept
- As per Clause # 3 of Annexure-III

3. TAXS & DUTIES- As per Clause # 4 of Annexure-III (CGST/SGST/IGST %) Please specify

18% GST
Accepted/ Not
PAYMENT - As per Clause # 5 of Annexure-III
accepted Accept

Please specify &

24CBBPK9314H1ZT
I. GST No with a Copy upload
Document Attach
Please specify & CBBPK9314H
II. PAN No. with a Copy upload Document Attach
4.
Please specify & HDFC Bank
III. BANK ACCOUNT Details with a cancelled cheque copy upload A/c No.:
50200008720266
Please specify &
UDYAM-GJ-22-
IV. UDYAM Adhar Registration No. with a Copy, If any upload
0026807

V. Valid E-MAIL ID
Please specify it@angelelectronics.
co.in
Please specify
VI. Valid MOBILE NO. 9714108364
DELIVERY PERIOD - As per Clause # 6 of Annexure-III
5. Please specify 90 Days
Please quote minimum Delivery Period.

BANK CHARGES - As per Clause # 7 of Annexure-III Accepted/

6. Accept
The supplier should bear all types of Bank Charges. Not accepted

Accepted/
7. PLACE OF DELIVERY - As per Clause # 8 of Annexure-III
Accept
Not accepted

Accepted/
8. LIQUIDATED DAMAGES - As per Clause # 9 of Annexure-III Accept
Not accepted

PERFORMANCE OF BANK GUARANTEE(PBG) – Agreed with

9.
As per Clause # 10 of Annexure-III
Remarks -

Agreed with
10. SECURITY DEPOSIT (SD) - As per Clause # 11 of Annexure-III
Remarks -

Accepted/
11. GUARANTEE/WARRANTY- As per Clause # 12 of Annexure-III Accept
Not accepted

Please specify /
12. PUBLIC PROCUREMENT POLICY (PREFERENCE TO MAKE IN INDIA)
Uploaded -
 As per Clause # 13 of Annexure-III

INSTALLATION & COMMISSIONING CHARGES – Accepted/

13. Accept
As per Clause # 14 of Annexure-III Not accepted

Accepted/
14 Quantity Tolerance As per Clause # 15 of Annexure-III -
Not accepted

Accepted/
15. LIMITATION OF LIABILITY - As per Clause # 16 of Annexure-III
Not accepted
Accept

Accepted/
16. FORCE MAJEURE CLAUSE - As per Clause # 17 of Annexure-III Accept
Not accepted

Accepted/
17. INSPECTION - As per Clause # 18 of Annexure-III Accept
Not accepted

OFFER VALIDITY - As per Clause # 19 of Annexure-III Accepted/

18. Accept
Please confirm your acceptance your offer validity is 180 days as per GeM Portal. Not accepted

Accepted/
19. TRANSPORTATION OF GOODS - As per Clause # 20 of Annexure-III Accept
Not accepted

Accepted/
20. Accept
WITHDRAWL OF TENDER - As per Clause # 21 of Annexure-III
Not accepted

Accepted/
21. TENDER EVALUATION PROCEDURE - As per Clause # 22 of Annexure-III Accept
Not accepted

Accepted/
22. DEVIATION - As per Clause # 23 of Annexure-III No Deviation
Not accepted

Accepted/
23. SETTLEMENT OF DISPUTES - As per Clause # 24 of Annexure-III Accept
Not accepted

Accepted/
24. AFTER-SALES-SERVICE - As per Clause # 25 of Annexure-III
Not accepted -

Submitted/
25. INTEGRITY PACT - - As per Clause #26 of Annexure-III -
Not Submitted

MAKE - As per Clause # 27 of Annexure-III Please specify your

26.
Please confirm make of your quoted item
Quoted make -

Accepted/
27. MANUFACTURER TEST CERTIFICATE - As per Clause # 28 of Annexure-III -
Not accepted

Accepted/
28. FITMENT GUARANTEE CERTIFICATE - As per Clause # 29 of Annexure-III
Not accepted
-

Accepted/
29. PRICE/PURCHASE PREFERENCES - As per Clause # 30 of Annexure-III Accept
Not accepted

Accepted/
30. FALL CLAUSE- As per Clause # 31 of Annexure-III
-
Not accepted

31. BANNING OF BUSINESS DEALING - As per Clause # 32 of Annexure-III Accepted/

Accept
 Not accepted

Accepted/
32. RISK PURCHASE - As per Clause # 33 of Annexure-III Accept
Not accepted

ORGANIATION CATEGORY – As per Clause # 34 of Annexure-III

Please specify & MSME:
33. (Please clearly specify your Organization Categoryi.e. MSE / NSIC / SSI / UDYAM-GJ-22-
upload
NON-SSI / SC/ST Firm / Woemen/ Enterprise/ STARTUP/ or Others)
0026807
Document Attach
Accepted/
34. COMPLIANCE TO SA8000 - As per Clause # 35 of Annexure-III Accept
Not accepted

BID SPECIFIC AUTHORIZATION CERTIFICATE – Agreed with

35. Remarks & -
As per Clause # 36 of Annexure-III Uploaded

Accepted/
36. SAMPLE - As per Clause # 37 of Annexure-III -
Not accepted

Accepted/
37.
DRAWING APPROVAL - As per clause # 38 of Annexure-III Accept
Not accepted

Please specify & MSME: UDYAM-GJ-

38.
MSME- As per Clause # 39 of Annexure-III upload 22-0026807
Document Attach
Accepted/
39.
BOARDER SHARING –As per clause # 40 of Annexure-III Accept
Not accepted

40.
DENIAL CLAUSE - As per clause # 41 of Annexure-III Accept
41.
OPTION CLAUSE -As per clause # 42 of Annexure-III Accept
Above Techno-Commercial Terms & Conditions and details submitted by tenderer are Fixed & Final and will be
42. considered for offer evaluation. If any deviation are not mentioned by the bidder, it is deemed that they are agreeing to
all Bid ATC

Name of the Firm / Company :- Angel Industrial Instrumentation

Name of Contact Person &Designation :- Ruhi Sisodia, Tender Executive

Mobile No. :- 9714108364

Tele No.& Fax No. (with STD) :- -

Email :- [email protected]

SIGNATURE & SEAL OF THE TENDERER

 ANNEXURE-V

STANDARD REQUIREMENTS FOR SA8000

 The Supplier/contractor shall comply with all requirements of SA 8000:2014 related to Child Labour,
Forced and Compulsory Labour, Health& Safety, Freedom of Association & Right to Collective
Bargaining, Discrimination, Disciplinary Practices, Working Hours and Remuneration.
 The Supplier/Contractor is obliged to comply with the applicable legal systems in force. In particular, the
Supplier/Contractor shall not engage, actively or passively, nor directly or indirectly any child labour
(persons below 14 years of age) and shall not violate basic human rights of its employees. Moreover, the
Supplier shall take responsibility for the health & safety of its employees. The Supplier shall act in
accordance with the applicable environmental laws and will use best efforts to promote the Code of
Conduct among its Suppliers.
 The supplier/contractor shall meet the legislations related to working hours, minimum wages and
payment of wages.
 NMDC Limited or any third party on behalf of NMDC Limited shall have the right to visit the
supplier/contractor premises to ensure compliance with SA 8000:2014 requirements with or without any
intimation.
 In addition to other rights and remedies NMDC Limited may have, NMDC may terminate the work order
and/or any purchase order issued there under in case of breach of SA 8000:2014 related obligations by the
Supplier/Contractor. However, provided that if the Supplier’s/Contractor’s breach of contract can be
rectified, then NMDC Limited’s right to terminate the work order and/or any purchase is subjected to the
provision that such breach has not been remedied by the Supplier within a reasonable grace period set by
NMDC Limited.
 Supplier/Contractor shall ensure that its direct and indirect subcontractors employed to perform the
works commit themselves to the SA 8000:2014 requirements.

The Supplier/Contractor shall:

a) Give the highest regard to Employee Health & Safety (EHS) to avoid any injury to any person and willful
damage to any property;
b) Ensure that the management of EHS is an integral and visible part of its work planning and execution
processes;
c) Strive for continuous improvement of its EHS performance;
d) Obtain B.I.O.M Bacheli Complex, NMDC Limited’s IMS policy, understand and implement the applicable
content of this policy;
e) Monitor and evaluate its safety performance to effectively take such actions as appropriate to rectify or
improve its overall safety performance;
f) Ensure that it complies with all applicable EHS laws and any EHS requirements of NMDC Limited in
force from time to time.
g) Ensure that in case NMDC Limited produces a safety and health documentation for the site (Occupational
Safety Plan) and provides Supplier with a copy of the Occupational Safety Plan, Supplier shall confirm
receipt thereof in writing and comply with the regulations contained therein. The same shall apply to
updates of the Occupational Safety Plan which NMDC Limited may make as it deems necessary. Supplier
shall ensure that its direct and indirect subcontractors employed to perform the works commit themselves
to the Occupational Safety Plan and its updates. The supplier shall commit to this clause to avoid any
injury to any persons who are legally on the work site including its own personnel, NMDC Ltd.’s
personnel and visitors.
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

To,
Nmdc Limited
Tender No.: GEM/2025/B/5792451
Tender Title: 1600055767 3KVA UPS WITH BATTERY BANK, INSTALLTATION AND COMMISSIONING OF 3KVA
UPS WITH BATTERY BANK

PQC

Customer Name PO Qty PO No. & Date Installation & Performance Report Date
Commissioning Date
Ganga Rasayanie (P) 2 ANKPODOM012022-354 10-06-2022 20-12-2023
Ltd. 20-05-2022
WESTERN RAILWAY 5 86247196102144 04-01-2025 -
06-SEP-24

Authorized Signature

From,
Angel Industrial Instrumentation

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

To,
Nmdc Limited
Tender No.: GEM/2025/B/5792451
Tender Title: 1600055767 3KVA UPS WITH BATTERY BANK, INSTALLTATION AND COMMISSIONING OF 3KVA
UPS WITH BATTERY BANK

NO DEVIATION CERTIFICATE

Name of Firm: Angel Industrial Instrumentation

Work Place: 89, Shree Dwarkesh Industrial Society, Nr. Santinath Mill, Navjivan Circle, Surat-395007

“We declare that we have no deviation in any technical specification and terms & conditions. All the technical
specification which you have mentioned in the tender, we qualify in those all the technical specification.”

Authorized Signature

From,
Angel Industrial Instrumentation

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

To,
Nmdc Limited
Tender No.: GEM/2025/B/5792451
Tender Title: 1600055767 3KVA UPS WITH BATTERY BANK, INSTALLTATION AND COMMISSIONING OF 3KVA
UPS WITH BATTERY BANK

LAND BORDER

I have read the clause regarding restriction on procurement from a bidder Angel Industrial Instrumentation of
a country which shares a land border with India; I certify that this bidder is not from such a country.

Authorized Signature

From,
Angel Industrial Instrumentation

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

To,
Nmdc Limited
Tender No.: GEM/2025/B/5792451
Tender Title: 1600055767 3KVA UPS WITH BATTERY BANK, INSTALLTATION AND COMMISSIONING OF 3KVA
UPS WITH BATTERY BANK

MAKE, MODEL, HSN CODE, CAPACITY, VOLTAGE

Sl. Product Make Model HSN Code Capacity Voltage

No.
1 UPS WITH BATTERY Angel AII-8 85044090 3 KVA UPS 230 VAC UPS
BANK 12V BATTERY BANK 12V each Battery

Authorized Signature

From,
Angel Industrial Instrumentation

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

To,
Nmdc Limited
Tender No.: GEM/2025/B/5792451
Tender Title: 1600055767 3KVA UPS WITH BATTERY BANK, INSTALLTATION AND COMMISSIONING OF 3KVA
UPS WITH BATTERY BANK

OEM CERTIFICATE

Name of Firm: Angel Industrial Instrumentation

Work Place: 89, Shree Dwarkesh Industrial Society, Nr. Santinath Mill, Navjivan Circle, Surat-395007

Here we ANGEL INDUSTRIAL INSTRUMENTATION give the confirmation that we are the Original Equipment
Manufacturer of the ANGEL make UPS since last 15 years. As a proof we will provide MSME Certificate or
Udhyog Adhar Number Certificate of our company. Where it mentions that we are manufacturer of Angel Make
UPS.

Authorized Signature

From,
Angel Industrial Instrumentation

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]
Ref. No.: AII/RS/SK/2024-25 Date: 30/01/2025

MAKE IN INDIA DECLARATION

Name of Firm: Angel Industrial Instrumentation

Work Place: 89, Shree Dwarkesh Industrial Society, Nr. Santinath Mill, Navjivan Circle, Surat – 395007

Bid No.: GEM/2025/B/5792451

Organization Name: Nmdc Limited

We Angel Industrial Instrumentation hereby certify that the offered materials are having the LOCAL
CONTENT of above 50% and hence we come under Class I Local Supplier as per definition on of Make in India
policy of Govt of India.
Place of Value addition: Angel Industrial Instrumentation, 89, Shree Dwarkesh Industrial Society, Nr. Navjivan
Circle, Udhna-Magdallah Road, Surat – 395007

Signature of Tenderer

Name & designation

Ms. Ruhi Sisodia
(Tender Executive)

Corp. Off.: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Factory Address: 89, Shree Dwarkesh Industrial Soc., Navjivan Circle, U.M.Road, Surat-395007
Phone: +91 9714108368, Email: [email protected]