Technical data LB 24
Drilling rig
Concept and characteristics
Kelly rope Leader top for Kelly rope
Leader top for auxiliary rope
Kelly bar
Tensioning cylinder for crowd system
Rotary
Inclination device
Casing driver
Auxiliary winch
Kelly winch
Crowd winch
Casing oscillator Radius
adjustment device
Undercarriage Uppercarriage
• High engine output with automatic engine speed control • High alignment forces
• Controlled entirely from cab • Simultaneous control of several movements via Load-
sensing multi-circuit hydraulics
• Sturdy and solid rig design
• Quick assembly of rotary possible through quick
• Solid parallel kinematics on the basic machine
connection
• High pull and push forces
• Equipment design according to latest European
• High torque regulations and standards
• Completely self-rigging (no auxiliary machines required) • All components designed to fulfill the special requirements
of a drilling rig
• Large range of working tools (all common drilling works
can be performed) • High manufacturing quality through quality control by
PDE®-system
• Stepless leader inclination 5° forward - 15° backward
depending on type of equipment
• Automatic vertical alignment
2 LB 24
Dimensions
Basic machine LB 24
5° 15° 8° 8°
75´
22.8´´
43.3´´
12´ 31.5´´
16´1´´ 11´9´´ 14´5´´
R
12
18´6´´ ´2´
´
Technical data Operating weight
Total height 75 ft Total weight with 27.6 inch 3–web shoes 165,350 lbs
with 31.5 inch 3–web shoes 166,450 lbs
Max. pull, leader on ground 72,000 lbf
with 35.4 inch 3–web shoes 167,550 lbs
Max. torque 185,900 lbf-ft
The operating weight includes the basic machine (with rotary and Kelly
Stepless leader inclination
bar MD 28/3/24) and 22,490 lbs counterweight.
Lateral inclination ± 8°
Forward inclination 5°
Backward inclination 15°
LB 24 3
Transport dimensions and weights
71´8´´ 9´10´´
11´2´´
11.8´´
44´´
31.5´´
22´3´´ 18´6´´ 30´11´´ 11´1´´
Transport with leader Dimensions and weights
includes the basic machine (ready for operation) with leader, without Leader length 63.7 ft
working tools (such as rotary, Kelly bar etc.) and without counterweight.
Weight complete without counterweight 119,300 lbs
71´8´´ 8´1´´
8´6´´ 26´6´´
´7´10´´
Transport leader Dimensions and weights
includes the leader without working tools (such as rotary, Kelly bar etc.). Leader length 63.7 ft
Weight complete 41,230 lbs
Lower part of the leader 2,645 lbs
Upper part of the leader with leader top 6,615 lbs
4 LB 24
Transport dimensions and weights
23´7´´ 9´10´´
6´9´´
20.8´´
44´´
5´2´´
11´2´´
11.8´´
4´10´´
9´10´´
31.5´´
18´6´´ 11´1´´
5´11´´
Transport basic machine Counterweight Rotary
ready for operation, without counterweight. Weight 22,490 lbs Transport weight
Transport weight 78,045 lbs BA 240 13,670 lbs
Weights can vary with the final configuration of the machine.
The figures in this brochure may include options which are not within the standard scope of supply of the machine.
LB 24 5
Rotary BA 240 with shock absorber
Gearbox frame
Drive motors
Kelly bar
Shock absorber
Gearbox
Cardanic joint
Casing driver
• 2-stage-gear drive for flexible adaptation to soil conditions
BA 240 • Due to stepless speed control via joystick optimum and precise
221,300 alignment and rock drilling is possible even at low speed levels;
184,400 it is not required to preselect an operating mode
Torque [lbf-ft]
147,510 • Kelly shock absorber and rubber bearing relieve the material and
Gear 1 reduce noise emission
110,650
Gear 2 • Thanks to the Kelly shock absorber the Kelly bar is guided
73,800 at greater length
36,900 • Various drive adapters provide compatibility with other systems
0
0 10 20 30 40 50 60
Speed [rpm]
6 LB 24
Kelly drilling
6.2 ft
Display for Kelly drilling
Technical data Kelly bars
Drilling drive - torque 1st gear 185,900 lbf-ft Drilling
A X Weight Kelly Ø
Drilling drive - speed 1st gear 28 rpm depth
Drilling drive - torque 2nd gear 92,950 lbf-ft (ft) (ft) (ft) (lbs) (inch)
Drilling drive - speed 2nd gear 57 rpm MD 28/3/24 32.4 27.9 72.2 11,030 16.5
MD 28/3/27 35.7 24.6 82.0 12,125 16.5
MD 28/3/30 39.0 21.3 91.9 13,010 16.5
MD 28/3/33 42.3 18.0 101.7 14,110 16.5
MD 28/3/36 45.5 14.8 111.5 15,000 16.5
MD 28/4/36 37.6 22.6 111.5 15,875 16.5
MD 28/4/42 42.5 17.7 131.2 17,860 16.5
Performance data MD 28/4/48 47.4 12.8 150.9 19,845 16.5
Max. drilling diameter* 6.2 ft uncased MD 28/4/54 52.3 7.9 170.6 21,605 16.5
Max. drilling diameter* 4.9 ft cased MD 28/4/60 57.3 2.9 190.3 23,590 16.5
*) Other drilling diameters available on request. Other Kelly bars available on request.
When using a casing oscillator, value X has to be reduced by 4.9 ft.
LB 24 7
Continuous flight auger drilling
Auger with auger guide
Display for continuous flight auger drilling
Technical data Performance data
Drilling drive - torque 1 gear
st
185,900 lbs-ft Drilling depth with auger cleaner* 49.5 ft
Drilling drive - speed 1st gear 28 rpm
Drilling depth without auger cleaner* 51.2 ft
Drilling drive - torque 2nd gear 92,950 lbs-ft
Drilling drive - speed 2nd gear 57 rpm Drilling depth with 19.7 ft Kelly extension,
without auger cleaner 70.9 ft
Max. pull force (crowd winch and Kelly winch) 161,900 lbf
Max. push force (weight of rotary and auger to be added) 33,750 lbf
Max. drilling diameter** 3.3 ft
*) Without Kelly extension
**) Other drilling diameters available on request.
8 LB 24
Double rotary drilling
Model DBA 80
Display for double rotary drilling
Technical data
Drilling drive I - torque 1st gear 61,220 lbf-ft
Drilling drive I - speed 1st gear 14 rpm
Drilling drive I - torque 2nd gear 30,240 kNm
Drilling drive I - speed 2nd gear 28 rpm
Drilling drive II - torque 1st gear 45,730 kNm
Drilling drive II - speed 1st gear 19 rpm
Drilling drive II - torque 2nd gear 22,865 kNm
Drilling drive II - speed 2nd gear 38 rpm
Max. drilling diameter* 24.4 inch
Max. drilling depth 50.5 ft
Max. pull force 112,400 lbf
*) Other drilling diameters available on request.
LB 24 9
Twin mix equipment
Model DMA 35
Display for soil mixing
Technical data
Drilling drive - torque 1st gear 25,850 lbf-ft
Drilling drive - speed 1st gear 38 rpm
Drilling drive - torque 2nd gear 12,910 lbf-ft
Drilling drive - speed 2nd gear 76 rpm
Max. drilling depth 50.5 ft
Max. drilling diameter* 27.6 inch
*) Other diameters available on request.
10 LB 24
Technical description
Engine Control
Power rating according to ISO 9249, 270 kW (362 hp) at 2000 rpm The control system - developed and manufactured by Liebherr - is
Engine type Liebherr D 936 L A6 designed to withstand extreme temperatures and the many heavy-duty
Fuel tank 185 gal capacity with continuous level construction tasks for which this machine has been designed. Complete
indicator and reserve warning machine operating data are displayed on a high resolution monitor.
Engine complies with NRMM exhaust certification EPA/CARB Tier 3 and A GSM modem allows for remote inquiry of machine data and error
97/68 EC Stage III A. indications. To ensure clarity of the information on display, different
levels of data are shown in enlarged lettering and symbols.
Control and monitoring of the sensors are also handled by this high
technology system. Error indications are automatically displayed on
the monitor in clear text. The machine is equipped with proportional
Hydraulic system control for all movements, which can be carried out simultaneously. Two
joysticks are required for operation. Pedal control can be changed to
The main pumps are operated by a distributor gearbox. Axial piston hand control.
displacement pumps work in open circuits supplying oil only when
needed (flow control on demand). The hydraulic pressure peaks are Options:
absorbed by the integrated automatic pressure compensation, which • PDE: Process data recording
relieves the pump and saves fuel. • GSM modem
Pumps for working tools 2x 63 gal/min
Separate pump for kinematics 36 gal/min
Hydraulic oil tank 159 gal Kelly winch with freewheeling
Max. working pressure 5076 PSI
Line pull effective (2nd layer) 44,960 lbf
The cleaning of the hydraulic oils occurs via an electronically monitored Rope diameter 28 mm
pressure and return filter. Any clogging is shown on the monitor in the Line speed 0-259 ft/min
cab. The use of synthetic environmentally friendly oil is also possible.
Auxiliarvy winch
Line pull effective (1st layer) 17,985 lbf
Crawlers Rope diameter 20 mm
Line speed 0-233 ft/min
Propulsion through axial piston motor, hydraulically released spring
loaded multi-disc brake, maintenance free crawler tracks, hydraulic
chain tensioning device.
Drive speed of telescopic undercarriage 0 – 0.68 mph Rope crowd system
Track force 142,530 lbf
Width of 3-web track shoes 31.5 inch Crowd force (push/pull) 72,000/72,000 lbf
Transport width 11.15 ft Line pull (effective) 36,000 lbf
Rope diameter 24 mm
Option: Travel of working tool 52.5 ft
Width of 3-web track shoes 27.6 inch Line speed 0-249 ft/min
Transport width 9.84 ft
Width of 3-web track shoes 35.4 inch The winches are noted for compact, easily mounted design. Propulsion
Transport width 11.45 ft is via a maintenance-free planetary gearbox in oil bath.
Load support by the hydraulic system; additional safety factor by
a spring-loaded, multi-disc holding brake. All line pull values are
effective values. The efficiency factor of approx. 25% has already been
deducted.
Swing
Consists of triple-row roller bearing with external teeth and one swing
drive, fixed axial piston hydraulic motors, spring loaded and hydraulically Noise emission
released multi-disc holding brake, planetary gearbox and pinion. Selector
for 3 speed ranges to increase swing precision. Noise emissions correspond with 2000/14/EC directive on noise
Swing speed from 0 – 3.5 rpm is continuously variable. emission by equipment used outdoors.
LB 24 11
Process data recording system - PDE® (additional equipment)
The Liebherr process data recording system PDE® constantly records the relevant process data duri-
ng the working process.
59%
pile number 12A/23
Ø60cm
10% 3.5 m
3.78 m
4.0 m
4.5 m
5.0 m
5.5 m CompactFlash
memory card
70 60 50 40 30 0 5 10 45 bar
ABC
PDE® colour monitor
for visualization of the PDE® data
PDE®
in the operator's cab
Printer
Standard PC provided Process data report software
Optional by the customer SCULI PDR External sensors
Depending on the application the recorded and processed data are displayed on the PDE® touchscreen in the operator‘s cab, e.g. in the form of an
online cast-in-place pile.
At the same time the PDE® is operated using this touchscreen. The operator can enter various details (e.g. jobsite name, pile number, etc.) and start
and stop recordings. A recording of every start-stop cycle carried out in the PDE® is established on a CompactFlash memory card.
The PDE® can be configured in a number of ways, e.g. for the connection of external sensors, for the generation of a simple protocol as graphic
file and/or for a printout directly in the operator‘s cab.
Process data reporting - PDR (additional equipment)
Comprehensive data evaluation and generation of reports on a PC is possible using the software
SCULI PDR.
LB 24 – 10528479 – 01/2011 Subject to change without notice.
Recordings management - The recordings generated by the PDE® system can be imported and managed in SCULI CFA Drilling
PDR. The data can be imported directly from the CompactFlash card or via the Liebherr telematics system LiDAT. job site:
machine ID:
motorway
1155xx
Certain recordings, e.g. for a particular day or jobsite, can be found using filter functions.
start date: 05.11.2008 pile number: E02
start time: 12:16:48 maximum depth: 2227 cm
stop time: 12:48:48 total concrete vol.: 15,123 m³
duration: 00:32:00 concrete volume pile: 14,531 m³
overconsumption: 29,8 %
maximum incline: 0,4 °
Viewing data - The data in each record is displayed tabularly. Combining several recordings provides results, for
example, regarding the total concrete consumption or the average depth. Furthermore, a diagram editor is available
for quick analysis.
Generating reports - A vital element of SCULI PDR is the report generator, which allows for the generation of
individual reports. These can be printed out directly or stored as pdf files. In the process the size, colour, line thickness
or even the desired logo can be configured. Moreover, the reports can be displayed in different languages, e.g. in
English and in the national language.
Liebherr-Werk Nenzing GmbH
P.O. Box 10, A-6710 Nenzing/Austria
Tel.: +43 50809 41-473
Fax: +43 50809 41-499
[email protected]www.liebherr.com
