Scribd
Upload
23 views2 pages

BASIC-TECHNOLOGY MOCK

This document is a mock examination for Basic Technology at Royal Heights School, consisting of multiple-choice questions and a theory section. The questions cover various topics such as types of materials, electrical circuits, and safety equipment. The theory section requires students to provide uses of specific materials and identify raw materials used in glass production.

Uploaded by

palmer okiemute
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views2 pages

BASIC-TECHNOLOGY MOCK

This document is a mock examination for Basic Technology at Royal Heights School, consisting of multiple-choice questions and a theory section. The questions cover various topics such as types of materials, electrical circuits, and safety equipment. The theory section requires students to provide uses of specific materials and identify raw materials used in glass production.

Uploaded by

palmer okiemute
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ROYAL HEIGHTS SCHOOL

1, Reigners Close, Off Giwa-Amu Rd. O/L, Warri

BASIC TECHNOLOGY MOCK EXAMINATION


1. The use of donkey and horse to travel from one places to another is known as a) under developed
b) technology c) artificial d)highly – developed
2. ___________ can be defined as a technical language used for describing things with the aid of
drawing a) technical drawing b) drawing materials c) drawing instruments d) drawing board
3. Wood can be classified into ___________ and __________ a) Hard wood and wet wood b) soft
wood and wet wood c) Hard wood and soft wood d) wet and dry wood
4. __________ are method used to assemble and fasten two pieces of wood without nailing (a)
adhesive (b) abrasive (c) joints (d) latex
5. Mechanical fastening method is a method of join surface method together(a) Temporary (b)
permanent (c) Slow (d) Excavating
6. This is a mixture of two or more metals to form one (a) Alloy (b) Latex (c) Casting (d) Smelting

7. There are two basic methods of electrical circuit wiring, series circuit wiring and _____ a)
rectangular circuit wiring b) close circuit wiring c) parallel wiring d) conductor wiring
8. We have two type of motion , the linear and __________ a) Rotary motion b) Fast motion c)
circular motion d) rectangular motion
9. Which of the following can not be regarded as a rescue operation a) vehicle extrication b) Surface
water c) Air sea rescue operation d) First aiding
10. Preventive maintenance include the following except a) Lubrication b) inspection c)adjustment
d) repair
11. A process of enlarging or reducing the size of drawing is known as a) Free hand sketch b) isometric
drawing c) orthographic drawing d) scale drawing
12. The preliminary work carried out to get a site ready for the erection of a building is called a)
Foundation b) site preparation c) bonding d) pegging
13. Ohm is the unit used for measuring a) resistance b) voltage c) current d) frequency
14. A regular polygon with nine sides is called ________ a) hexagon b) heptagon c) decagon d)
nonagon
15. The type of meter installed in our homes by (NEPA) PHCN is called a) multi meters b) voltmeter c)
watt meter d) watt- hour meter
16. Reading of building plan means _____ a) Identification and Interpreting building parts b)
construction of building c) Labelling the building d) Rendering of the building
17. The basic function of a thermostat in an electric fan is to ____ a) switch on/off the fan when
necessary due to room temperature b) Control the noise c) Regulate the speed d) Control the
temperature
18. The following are the mechanisms that make use of electric motors for their operations EXCEPT
____ a) Refrigerator b) Grinder c) Loud speaker d) Blender

THEORY ( SECTION B)

1. (a) State three uses of each i. Ceramic ii. Plastics iii. Rubber iv. Wood
(b) State any two raw materials used in glass production

(c) State 3 safety equipment used in workshop

You might also like