ET-51.

2V100Ah-HV

User Manual

Light up every corner of the world with renewable energy.

 ET-51.2V100Ah-HV

Content
1 General Information ...................................................................................................................................................... 2
2 Safety Measures ............................................................................................................................................................4
3 Technical Parameters .....................................................................................................................................................5
4 Product Overview ......................................................................................................................................................... 7
4.1 Brief Introduction ..................................................................................................................................................7
4.2 ET-HV BCU .........................................................................................................................................................8
4.2.1 BCU Technical Data ......................................................................................................................................8
4.2.2 BCU Port ......................................................................................................................................................8
4.3 ET-HV Battery Module ......................................................................................................................................... 9
4.4 Communication Port-PIN .......................................................................................................................................9
5 Installation Guide ........................................................................................................................................................10
5.1 Inspection Before the Installation ......................................................................................................................... 10
5.1.1 Check the Outer Packaging .......................................................................................................................... 10
5.1.2 Check Deliverables ......................................................................................................................................10
5.2 Tools ..................................................................................................................................................................11
5.3 Installation Requirements .....................................................................................................................................11
5.4 Fix the Battery .................................................................................................................................................... 12
5.5 Connect the Power Cable, Communication Cable .................................................................................................. 13
6 Touch Screen External .................................................................................................................................................13
6.1 User Mode ..........................................................................................................................................................13
6.2 Engineering Mode ...............................................................................................................................................14
6.3 Set Up ................................................................................................................................................................ 15
6.4 Fault Information Interface .................................................................................................................................. 15
7 Cleaning and Maintenance ........................................................................................................................................... 15
7.1 Cleaning Work ....................................................................................................................................................16
7.2 Maintenance ....................................................................................................................................................... 16
7.2.1 Recharging Requirements During Normal Storage ......................................................................................... 16
7.2.2 Recharging Requirements for Excessive Discharge ........................................................................................ 16

8 Common Issues and Solutions ......................................................................................................................................17

8.1 Common Issues and Solutions ..............................................................................................................................17
8.2 Emergency ......................................................................................................................................................... 18
8.3 About Battery System ..........................................................................................................................................18

1
 ET-51.2V100Ah-HV

1 General Information

This manual introduces the ET-51.2V100Ah-HV battery products. Which includes: battery
information, using way, guide, safety information, installation guide, common issues and
maintenance. Please read this manual carefully before using the battery. For any questions,
please contact EITAI immediately for advice and clarification.

ET-51.2V100Ah-HV is an energy storage unit,that is designed for residential application

scenarios with the capability of short-term backup, not suitable for supporting life-sustaining
medical devices. This product is intended for used only in accordance with the information
provided in the enclosed documents and applicable local standards and regulations. Any other
use may result in personal injury or property damage. The illustrations in this manual are only
intended to help explain the concept of the system configuration, including use guidelines, safety
precautions, common operating problems, and subsequent battery maintenance.

Alterations to the product, e.g. changes or modifications, are only permitted with the express
written permission of EITAI. Unauthorized changes will not be allowed by warranty claims.
EITAI shall not be liable for any damage resulting from such changes. Any use of the product
other than described in the intended use section does not qualify as appropriate. The enclosed
documentation is an integral part of this product. Please keep the documentation in a safe and
convenient place for future reference.

The type labels were attached on the product, which contain the product identification
information. For safe usage, the user must be well-informed of the contents in the type labels.

2
 ET-51.2V100Ah-HV
Labels:

3
 ET-51.2V100Ah-HV

2 Safety Measures
This section contains safety information that must always be observed when using or installing
batteries. To prevent personal injury or property damage and ensure long-term operation of the
batteries, please read this section carefully, always watch for warnings from all safety messages.

Environmental requirements:

1. Do not expose the battery to temperature above 50 °C;

2. Do not place the battery near any heat source;
3. Do not expose the battery to moisture or liquid;
4. Do not expose the battery to a corrosive gas or liquid;
5. Do not expose the battery to a combustible gas or liquid;
6. Place the battery in safe place that away from children and animals.

Operation Precautions:

1. Do not disassemble the battery;

2. Do not touch the battery pack with wet hands;
3. Do not smash, fall, or puncture the battery;
4. Do not short-circuit the terminal, and remove all metal jewelry items that may produce a
short-circuit before installation and repair;
5. Always handle the products in accordance with the local safety regulations;
6. Store and use the battery in the user's manual, 8.Ensure reliable grounding;
7. Disconnecting all batteries to the wires before installation and repair;
8. The stacking of packaging batteries shall not exceed the quantity specified on the
packaging.

4
 ET-51.2V100Ah-HV

3 Technical Parameters

ET-51.2V100Ah-HV
Model ETHV-20.5 ETHV-25.6 ETHV-30.7 ETHV-35.8 ETHV-40.9 ETHV-46.1 ETHV-51.2

Number of
Battery 4 5 6 7 8 9 10
Modules
Electrical parameters
Nominal
204.8V 256V 307.2V 358.4V 409.6V 460.8V 512V
voltage
Nominal
20.48KW.h 25.6KW.h 30.72KW.h 35.84KW.h 40.96KW.h 46.08KW.h 51.2KW.h
capacity
Total energy
18.43KW.h 23.04KW.h 27.65KW.h 32.26KW.h 36.86KW.h 41.47KW.h 46.08KW.h
(90% DOD)
Maximum
50A 50A 50A 50A 50A 50A 50A
current
Maximum
10240W 12800W 15360W 17920W 20480W 23040W 25600W
power
General parameters
Battery type LiFePO4
Working
≤85%rh
humidity
Store humidity ≤85%rh

Working
≤2000m
altitude
Maximum
number of 4 sets
parallel
Protection
IP21
level
Net weight 185Kg 227.5Kg 270Kg 312.5Kg 355Kg 397.5Kg 440Kg
567*355* 567*355* 567*355* 567*355*
Cabinet size 567*355* 567*355*1 567*355*1
1000 1170 1510 1680
(W*D*H) 830 (mm) 340 (mm) 850 (mm)
(mm) (mm) (mm) (mm)
Battery rack
567*355*1370 (mm) 567*355*2050 (mm)
size(W*D*H)
Cabinet
45Kg 56Kg
weight
Certificate CE, MSDS, UN38.3

Circle life ≥6000 times

Communicatio
CAN, RS485, WIFI
n port
Discharging
working -20℃ ~ 60℃
temperature

5
 ET-51.2V100Ah-HV

Charging
working 0℃ ~ 60℃
temperature
Storage 12 months, ≤25℃
temperature
6 months, ≤35℃

3 months, ≤45℃

Warranty 5 years

Battery Module Parameters

Rated Voltage 51.2V

Rated Storage Capacity 100Ah

Weight 42.5Kg

Dimensions (W*D*H) 567*355*150（mm）

Protection Level IP21

6
 ET-51.2V100Ah-HV

4 Product Overview

4.1 Brief Introduction

ET-HV high voltage lithium battery energy storage system consisting of multi battery modules
(51.2V100Ah) and a BCU (Battery Control Unit) in series. Single set battery max. supports
17units, with an max. operating voltage range of 185.6V-980V, is used for household /
commercial energy storage applications, working with a high voltage inverter for energy storage
purposes.

ET-HV has a built-in BMS (battery management system, including the main BMS in BCU and
the slave BMS in battery module), which can manage and monitor battery information, including
voltage, current and temperature. In addition, BMS can balance battery charging to prolong
service life. BMS has over discharge, over charge, over-current, high / low temperature and other
protection functions. The system can automatically manage the charge state, discharge state and
balance state. It has built-in wireless WIFI module, support mobile phone remote monitoring and
debugging. The exterior is equipped with touch color screen, status indicator and power indicator,
which can also observe the status of the energy storage system clearly.

ET-HV has soft-start circuit inside so it can support inverters without soft-start function.

7
 ET-51.2V100Ah-HV

4.2 ET-HV BCU

The BCU includes the master BMS, DC fuse, soft starting circuit, charging circuit, discharge
circuit, 24VDC/DC power supply module, cut off the protection switch, touch color screen,
wireless WIFI module, status indicator.

The BMS in the battery module collects the battery voltage and temperature data uploaded to the
master BMS via the internal CAN. BMS’s BCU controls the charging voltage / current and
discharge voltage / current.

4.2.1 BCU Technical Data

Adaptable battery model ET-51.2V100Ah-HV

Rated voltage 185.6V-980V
Max. power 2560W* battery module number
Max. current 50A
Refer dimension (W*D*H) 567*355*150(mm)
Refer weight 15Kg

4.2.2 BCU Port

NO. Name Description NO. Name Description

1． Folding handle 2． Wifi Wifi wire
3． ON/OF Cut-off switch 4． Touch screen
5． P+ Connection position of 6． P- Connection position of PCS
Communication with Connection position of battery
7． PC 8． B+
computer positive pole

8
 ET-51.2V100Ah-HV

Connection position of
9． B- 10． POWER System start switch
battery negative pole

11． RUN Work normal 12． ALM Alarm

13． SOC Power light 14． PAR Parallel communication port

Communication with Communication with battery

15． CAN 16． BAT
computer module

4.3 ET-HV Battery Module

NO. Name Description

1． Folding handle

2． B+ Battery module positive pole (orange)

3． COM-IN Battery communication port

4． Cooling fan

5． B- Battery module negative pole (black)

6． COM-OUT Battery communication port

The battery module includes battery cell and the salve BMS. The slave BMS collects and
transfers the battery voltage and temperature of the battery cell in real time and the BCU to the
main BMS via internal communication.

4.4 Communication Port-PIN

9
 ET-51.2V100Ah-HV

PORT PIN1 PIN2 PIN3 PIN4 PIN5 PIN6

PC CAN0H CAN0L CAN0H CAN0L NC NC

CAN CAN1H CAN1L CAN1H CAN1L NC NC

PAR DO DI NC NC NC NC

BAT SPI-H SPI-L NC NC NC NC

COM-IN SPI-H SPI-L NC NC NC NC

COM-OUT SPI-H SPI-L NC NC NC NC

5 Installation Guide

5.1 Inspection Before the Installation

5.1.1 Check the Outer Packaging

Packaging materials and components may be damaged during transportation. Check the outer
packaging material before installing the battery. Check the packaging material surface for
damage, such as holes and cracks. If any damage is found, do not unpacking the battery and
contact the dealer as soon as possible. It is recommended that you remove the packaging material
within 24 hours before installing the battery.

5.1.2 Check Deliverables

After unpacking the package, check that the deliverables are intact and complete. If any damage
or missing parts is found, please contact EITAI.

10
 ET-51.2V100Ah-HV
Accessories list in the package.

ET-51.2V100Ah-HV
NO. Name Model Unit Qty Mark
1 Battery module ET-51.2V100Ah-HV PCS 1
2 Communication cable PCS 1 For battery connection
3 Power cable Red/black 4AWG SET 1 For battery connection
NO. 1~3 are accessories for slave control;
NO. 4~10 are accessories for BCU.
4 Battery control unit BCU PCS 1
5 Power cable Red/black 4AWG PCS 2 For inverter connection
6 Communication cable PCS 1 For battery connection
For BCU PAR port
7 Matching resistor PCS 1
connection
ET-51.2V100Ah-HV
8 User manual PCS 1
user manual
9 User manual Wifi user manual PCS 1
10 Upper computer cable USB-CAN PCS 1 For computer connection
Steel + insulated
11 Rack stacking accessories SET 1 Just choose one of the two.
acrylic sheet
(Optional)
12 Battery cabinet Steel SET 1

5.2 Tools
Type Tools

Cross
Measuring tape Hammer drill Socket wrench
Screwdriver
Installation

ESD gloves Safety goggles Dust mask Safety shoes

Protection

5.3 Installation Requirements

1. Install the battery in an indoor environment.

11
 ET-51.2V100Ah-HV
2. Place the battery in a safe position away from children and animals.
3. Do not place the battery near any heat source, and avoid generating sparks.
4. Do not expose the battery to moist air or liquid.
5. Do not expose the battery to direct sunlight.
6. Do not expose the battery to a combustible gas or liquid.
7. The mounting carrier shall be fire resistant. Do not install batteries on flammable buildings.
8. Ensure ground connection.

5.4 Fix the Battery

Insufficient or no grounding may cause an electric shock. Device malfunctions, and insufficient
or no grounding may cause device damage and life-threatening electric shocks.

Assembly the battery cabinet, install the mounting ear sheet metal in turn, and then put battery
into the cabinet.

1. Assembly stack sheet metal installation:

Install stacked sheet metal at the four corners of each battery, each sheet metal is fixed by four
screws. The limit bolt is above the sheet metal.
Align with the limiting latch, and stack battery modules one by one (if there is a serial number
attached to the battery module, the battery module is placed next to the main control module, and
the other serial numbers are placed downward). The main control module is installed on the top.

2. Battery cabinet installation:

Install the mounting ear sheet metal in turn, and then install the battery rack.

12
 ET-51.2V100Ah-HV

5.5 Connect the Power Cable, Communication Cable

Before connecting the power cable of the battery string, check that the installed battery module
and the main control module are delivered together in set. Do not mix them with other systems to
avoid system exceptions.

6 Touch Screen External

6.1 User Mode

First boot, enter user mode.

13
 ET-51.2V100Ah-HV

Click anywhere on the screen to pop up the following button, with specific instructions as
follows:

Click “left&right” different user mode styles (including day/night mode) can be switched.; slide
the “sun icon” left and right to adjust screen brightness; Click “settings” to enter engineering
mode to view more information; click “back” to return to the interface

6.2 Engineering Mode

Enter engineering mode, with the date displayed on the top left, faults displayed between date
and time, and time displayed on the right.
Central display of total voltage, SOC, total Current, highest voltage, lowest voltage, highest
temperature, lowest temperature.
The navigation menu is displayed at the bottom, allowing you to switch to viewing interface
details.

‘Cell Vol’: single cell voltage;

‘Cell Temp’: single cell temperature;
‘Heating Temp’: MOS temperature, environment temperature;

14
 ET-51.2V100Ah-HV
‘Relay Status’: relay detail information, includes: relay- name, On/ Off status and Alarm. Slide
left and right to check more information.
‘Chg_Inf’: enter the charging detail page, to check charging time, BMS request and charger
information.
‘Others’: enter heating information, edge resistance value, diagnosis information and cumulative
time information interface. Click each icon to enter the three-level interface to view details

6.3 Set Up

Click “Settings” to enter the settings interface, which includes language settings and brightness
settings.

6.4 Fault Information Interface

Click the real-time status bar to enter the fault information interface, where you can view the
fault name and time of occurrence. Swipe left and right to check see more faults

7 Cleaning and Maintenance

15
 ET-51.2V100Ah-HV

7.1 Cleaning Work

Please note: please turn off the power supply of the system before cleaning. It is recommended to
clean battery regularly. If the shell is dirty, please use a soft and dry brush or dust collector to re
move the dust. Do not use solvents, or corrosive liquids to clean the enclosure.

7.2 Maintenance

7.2.1 Recharging Requirements During Normal Storage

The battery shall be stored in an environment with a temperature range of -10℃~45℃ and shall
be maintained regularly according to the following table to 0.5C current is charged until
40%SOC after long storage.

Charging conditions during storage

Store the ambient Relative humidity of the

Storage time SOC
temperature storage environment
Below -10℃ Prohibit /
-10~25℃ 5%~70% ≤12 months 30%≤soc≤60
25~35℃ 5%~70% ≤6 months 30%≤soc≤60
35~45℃ 5%~70% ≤3 months 30%≤soc≤60
Above 45℃ Prohibit
7.2.2 Recharging Requirements for Excessive Discharge

Charge the over-discharge (90%DOD) battery within the time of meeting the table below,
otherwise the over-discharge battery module will be damaged.

Charging requirements for excessive battery discharge

Storage environment temperature Storage time Note:

-10~25℃ ≤ on Day 15 The battery pack disconnected to PCS,

25~45℃ ≤ on Day 7 charge the battery with DC charger.

Battery pack connect to the

-10~45℃ <12 hours Inverter, charge the battery with PV or
grid.

16
 ET-51.2V100Ah-HV

8 Common Issues and Solutions

8.1 Common Issues and Solutions

The user can monitor the operating status, warning, and alarm information through the battery
LCD display.

1. The battery cannot be turned on, and the LED indicator lights all turn off the battery depth
discharge and requires charging first. If unable to charge, contact EITAI.

2. If red light shows system abnormal, please check below values:

1) Temperature: Above 60℃ or below 0℃, the battery protection turns on, could not charge.
Solution: Move the battery to normal operating temperature range between 0°C to 60 °C.
2) Temperature: above 60℃ or below -20℃, the battery cannot discharge.
Solution: Move the battery to normal operating temperature range between -20°C to 60 °C.
3) Current: If ET-51.2V100Ah-HV’s current is greater than 50A, the battery protection device
will be turned on.
Solution: Stop using electrical appliances that exceed the maximum battery power load.
4) High voltage: If the single battery cell’s voltage is above 3.6V or higher, battery charging
protection turns on.
Solution: The inverter will stop charging the battery if it sets the intelligent LI mode or a
reasonable charging voltage.
5) Low voltage: If the single battery cell’s voltage is below 2.9V or lower, battery charging
protection turns on.
Solution: Charge the battery.
Excluding the above five points, if the fault cannot be found, turn off the battery and contact
EITAI.

3. It’s normal that the SOC LED are different if in multiple battery parallel systems. Before
installing batteries in parallel, measure the voltage of each battery to ensure that the voltage
difference of each battery is within 1V, and the the battery production date within 1 year.

1) When installing for the first time, please charge in full first to balance the capacity gap;
2) If the error is within 10% when the lowest SOC display percentage is compared with the
highest SOC display percentage, and the SOC display percentage is the same within 10 minutes,

17
 ET-51.2V100Ah-HV
it is normal operation;
3) Before expanding battery capacity, please charge and discharge the online battery to
45%-50%SOC; After expanding the capacity, charge the battery system to balance the capacity
gap. Ensure that the capacity difference before parallel is no more than 10%. If the capacity gap
is large, it will take about 2 cycles to balance the capacity gap. The actual equilibrium time
depends on the capacity difference and the charge-discharge current.
Exclude the above three points. If the SOC display still fails, please contact EITAI.

8.2 Emergency

Please cut off the power supply and turn off the battery in an emergency.

1. If the battery pack is damp or immersed in water, do not get close to the battery, and
then contact EITAI or an authorized dealer for technical support.
2. Do not use water to fire when a fire! Only dry powder extinguishers; place the battery
pack in a safe area if possible.
3. Battery leaking the electrolyte. If the battery pack leaks the electrolyte, avoid contact
with leaking liquid or gas.
If someone is exposed to the leaking material, do the following immediately:
Inhalation: evacuate the contaminated areas and seek medical treatment.
Contact eye: Rinse eyes with running water for 15 minutes and seek medical treatment.
Contact skin: Wash the infected site with soap and water and seek medical treatment.
Swallow in: urge vomiting, and seek medical treatment.
Battery damage: Damaged battery is dangerous and must be treated with very carefully. Battery
cannot be used or may be dangerous to person or property. If the battery pack is damaged,
contact EITAI for handling.

8.3 About Battery System

1.The system treatment must comply with the locally applicable disposal regulations of
electronic waste and second-hand batteries.
2.Do not treat the battery system along with household waste.
3.Avoid exposing the battery to high heat or direct sunlight.
4.Avoid exposing the battery to high humidity or corrosive environments.
5.Do not expose the battery to a combustible gas or liquid.

18
 EITAI green energy, better service, getting "brighter".

Eitai（Xiamen）New Energy Technology Co.,Ltd.

Add: Unit 2101 NO.8, Chengyi North Street, Software Park Phase III,
High-tech Zone, Xiamen City, China