ST3232

3 TO 5.5V, LOW POWER, UP TO 400KBPS, RS-232 DRIVERS AND RECEIVERS

s s

s s

300A SUPPLY CURRENT 300Kbps MINIMUM GUARENTEED DATA RATE 6V/s MINIMUM GUARANTEED SLEW RATE MEET EIA/TIA-232 SPECIFICATIONS DOWN TO 3V AVAILABLE IN DIP-16, SO-16, SO-16 LARGE AND TSSOP16
DIP SOP

DESCRIPTION The ST3232 is a 3V powered EIA/TIA-232 and V.28/V.24 communication interface with low power requirements, high data-rate capabilities. ST3232 has a proprietary low dropout transmitter output stage providing true RS-232 performance from 3 to 5.5V supplies. The device requires only four small 0.1F standard external capacitors for operations from 3V supply. The ST3232 has two receivers and two drivers. The device is guaranteed to run at data rates of 250Kbps while maintaining RS-232 output levels. Typical applications are Notebook, Subnotebook and Palmtop Computers, Battery Powered Equipment, Hand-Held Equipment, Peripherals and Printers. ORDERING CODES
Type ST3232CN ST3232BN ST3232CD ST3232BD ST3232CDR ST3232BDR ST3232CW ST3232BW ST3232CWR ST3232BWR ST3232CTR ST3232BTR Temperature Range 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C 0 to 70 C -40 to 85 C Package DIP-16 DIP-16 SO-16 (Tube) SO-16 (Tube) SO-16 (Tape & Reel) SO-16 (Tape & Reel) SO-16 Large (Tube) SO-16 Large (Tube) SO-16 Large (Tape & Reel) SO-16 Large (Tape & Reel) TSSOP16 (Tape & Reel) TSSOP16 (Tape & Reel)

SOP Large

TSSOP

Comments 25parts per tube / 40tube per box 25parts per tube / 40tube per box 50parts per tube / 20tube per box 50parts per tube / 20tube per box 2500 parts per reel 2500 parts per reel 49parts per tube / 25tube per box 49parts per tube / 25tube per box 1000 parts per reel 1000 parts per reel 2500 parts per reel 2500 parts per reel

May 2002

1/11

ST3232
PIN CONFIGURATION

PIN DESCRIPTION
PlN N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SYMBOL C 1+ V+ C1 C 2+ C2 VT2OUT R2IN R2OUT T2IN T1IN R1OUT R1IN T1OUT GND V CC NAME AND FUNCTION Positive Terminal for the first Charge Pump Capacitor Doubled Voltage Terminal Negative Terminal for the first Charge Pump Capacitor Positive Terminal for the second Charge Pump Capacitor Negative Terminal for the second Charge Pump Capacitor Inverted Voltage Terminal Second Transmitter Output Voltage Second Receiver Input Voltage Second Receiver Output Voltage Second Transmitter Input Voltage First Transmitter Input Voltage First Receiver Output Voltage First Receiver Input Voltage First Transmitter Output Voltage Ground Supply Voltage

ABSOLUTE MAXIMUM RATINGS

Symbol V CC V+ VV+ +|V-| TIN RIN TOUT R OUT tSHORT Supply Voltage Doubled Voltage Terminal Inverted Voltage Terminal Transmitter Input Voltage Range Receiver Input Voltage Range Transmitter Output Voltage Range Receiver Output Voltage Range Transmitter Output Short to GND Time Parameter Value -0.3 to 6 (VCC - 0.3) to 7 0.3 to -7 13 -0.3 to 6 25 13.2 -0.3 to (VCC + 0.3) Continuous Unit V V V V V V V V

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. V+ and V- can have a maximum magnitude of +7V, but their absolute addition can not exceed 13 V.

2/11

ST3232
ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 3V to 5.5V, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C)
Symbol Parameter No Load No Load Test Condit ions VCC = 3V 10% VCC = 5V 10% TA = 25C TA = 25C Min. Typ. 0.3 1 Max. 1 2 Unit mA mA ISUPPLY VCC Power Supply Current

LOGIC INPUT ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 3V to 5.5V, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C)
Symbol VTIL VTIH IIL Parameter Input Logic Threshold Low Input Logic Threshold High Input Leakage Current V CC = 3.3V V CC = 5V T-IN Test Condit ions T-IN (Note 1) 2 2.4 0.01 1 Min. Typ. Max. 0.8 Unit V V V A

Note 1: Transmitter input hysteresis is typically 250mV

TRANSMITTER ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F tested at VCC = 3V to 5.5V, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C)
Symbol VTOUT RTOUT ITSC Parameter Output Voltage Swing Transmitter Output Resistance Output Short Circuit Current Test Condit ions All Transmitter outputs are loaded with 3K to GND V CC = V+ = V- = 0V V CC = 3V to 5V VOUT = 2V VOUT = 12V Min. 5 300 Typ. 5.4 10M 60 Max. Unit V mA

RECEIVER ELECTRICAL CHARACTERISTICS (C1 - C4 = 0.1F tested at VCC = 3V to 5.5V, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C)
Symbol VRIN VRIL VRIH Parameter Receiver Input Voltage Operating Range RS-232 Input Threshold Low RS-232 Input Threshold High Test Conditio ns Min. -25 TA = 25C TA = 25C TA = 25C TA = 25C TA = 25C IOUT = 1.6mA IOUT = -1mA VCC-0.6 V CC-0.1 VCC = 3.3V VCC = 5V VCC = 3.3V VCC = 5V 3 0.6 0.8 1.2 1.5 1.5 1.8 0.3 5 7 0.4 2.4 2.4 Typ. Max. 25 Unit V V V V V V K V V

VRIHYS Input Hysteresis RRIN V ROL VROH Input Resistance TTL/CMOS Output Voltage Low TTL/CMOS Output Voltage High

3/11

ST3232
TIMING CHARACTERISTICS (C1 - C4 = 0.1F, VCC = 3V to 5.5V, TA = -40 to 85C, unless otherwise specified. Typical values are referred to TA = 25C)
Symbol DR tPHLR tPLHR |tPHLT - tTHL| |tPHLR - tTHR| SRT Parameter Data Transfer Rate Propagation Delay Input to Output Transmitter Propagation Delay Difference Receiver Propagation Delay Difference Trnasition Slew Rate TA = 25C RL = 3K to 7K VCC = 3.3V measured from +3V to -3V or -3V to +3V C L = 150pF to 1000pF C L = 150pF to 2500pF Test Conditions R L = 3K C L2= 1000pF one trasmitter switching R XIN = RXOUT CL = 150pF (Note 1) Min. 300 Typ. 400 0.2 100 50 Max. Unit Kbps s ns ns

6 4

30 30

V/s V/s

Transmitter Skew is measured at the transmitter zero cross points

APPLICATION CIRCUITS

CAPACITANCE VALUE (F)

VCC 3.0 to 3.6 4.5 to 5.5 C1 0.1 0.047 C2 0.1 0.33 C3 0.1 0.33 C4 0.1 0.33 Cbypass 0.1 0.33

4/11

ST3232
TYPICAL PERFORMANCE CHARACTERISTICS (unless otherwise specified Tj = 25C) Figure 1 : Driver Voltage Transfer Characteristics for Trasmitter Inputs Figure 4 : Output Current vs Output Low Voltage

Figure 2 : Driver Voltage Transfer Characteristics for Receiver Inputs

Figure 5 : Output Current vs Output High Voltage

Figure 3 : Output Current vs Output Low Voltage

Figure 6 : Output Current vs Output High Voltage

5/11

ST3232
Figure 7 : Receiver Input Resistance

6/11

ST3232

Plastic DIP-16 (0.25) MECHANICAL DATA

mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch

P001C
7/11

ST3232

SO-16 MECHANICAL DATA

DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010

PO13H
8/11

ST3232

SO-16L MECHANICAL DATA

DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 0.5 1.27 0.75 8 (max.) 0.020 0.050 0.029 7.4 10.1 10.0 1.27 8.89 7.6 0.291 10.5 10.65 0.35 0.23 0.5 45 (typ.) 0.397 0.393 0.050 0.350 0.300 0.413 0.419 0.1 mm. MIN. TYP MAX. 2.65 0.2 2.45 0.49 0.32 0.014 0.009 0.020 0.004 MIN. inch TYP. MAX. 0.104 0.008 0.096 0.019 0.012

PO13I
9/11

ST3232

TSSOP16 MECHANICAL DATA

mm. DIM. MIN. A A1 A2 b c D E E1 e K L 0 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8 0.75 0 0.018 0.024 1 TYP MAX. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8 0.030 0.004 0.039 MIN. TYP. MAX. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 inch

A2 A1 b e K c L E

E1

PIN 1 IDENTIFICATION

1
0080338D

10/11

ST3232

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com

11/11

This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.