DATASHEET

AZ 16-02ZVRK-M20-2254
3 cable entries M 20 x 1.5
Large wiring compartment
Thermoplastic enclosure
Double-insulated
52 mm x 90 mm x 30 mm
Universal coding
Long life
High level of contact reliability with low voltages and
currents
Insensitive to soiling
Slotted holes for adjustment, circular holes for location

Data

Ordering data

Product type description AZ 16-02ZVRK-M20-2254

Article number (order number) 101161096

EAN (European Article Number) 4030661192208

eCl@ss number, version 12.0 27-27-26-02

eCl@ss number, version 11.0 27-27-26-02

eCl@ss number, version 9.0 27-27-26-02

ETIM number, version 7.0 EC002592

ETIM number, version 6.0 EC002592

Approvals - Standards

Certificates cULus
CCC

General data
Standards EN ISO 13849-1
EN ISO 14119
EN IEC 60947-5-1

Coding level according to EN ISO Low

14119

Working principle electromechanical

Housing material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Gross weight 120 g

General data - Features

Number of actuating directions 3

Number of safety contacts 2

Number of cable glands 3

Safety classification

Vorschriften EN ISO 13849-1

Performance Level, up to c

Category 1

B Normally-closed contact 2,000,000 Operations

10D
(NC)

Note Electrical life on request.

B Normally-open contact (NO) 1,000,000 Operations

10D

Note at 10% I and ohmic load

e

Mission time 20 Year(s)

Safety classification - Safety outputs

Note (B Normally open at 10% I and ohmic load

10D e
contact (NO))

Safety classification - Fault exclusion

Please note: Can be used when fault exclusion for dangerous damage to the 1-channel
mechanism is permissible and sufficient protection against manipulation is
guaranteed.

Performance Level, up to d

Category 3

Note for 2-channel use and with suitable logic unit.

Mission time 20 Year(s)

Mechanical data

Mechanical life, minimum 1,000,000 Operations

Latching force 5N

Positive break travel 8 mm

Positive break force per NC 10 N

contact, minimum

Positive break force, minimum 20 N

Actuating speed, maximum 2 m/s

Mounting Screws

Type of the fixing screws 2x M6

Mechanical data - Connection technique

Cable entry 3 x M20 x 1,5

Termination Screw terminals

Cable section, minimum 0.25 mm²

Cable section, maximum 2.5 mm²

Note All indications including the conductor ferrules.

Allowed type of cable solid single-wire

solid multi-wire
flexible

Mechanical data - Dimensions

Length of sensor 30 mm

Width of sensor 52 mm
Height of sensor 90 mm

Ambient conditions

Degree of protection IP67

Ambient temperature -30 ... +80 °C

Storage and transport -40 ... +85 °C

temperature

Permissible installation altitude 2,000 m

above sea level, maximum

Ambient conditions - Insulation values

Rated insulation voltage U 500 V

i

Rated impulse withstand voltage 6 kV

U
imp

Overvoltage category III

Degree of pollution 3

Electrical data

Thermal test current 10 A

Required rated short-circuit 1,000 A

current

Switching element 2 NC contact

Switching principle slow action, positive break NC contact

Maximale Schalthäufigkeit 4,000 /h

Material of the contacts, Silver

electrical

Electrical data - Safety contacts

Voltage, Utilisation category AC- 230 VAC

15

Current, Utilisation category AC- 4A

15
Voltage, Utilisation category DC- 24 VDC
13

Current, Utilisation category DC- 4A

13

Electrical data - Auxiliary contacts

Voltage, Utilisation category AC- 230 VAC

15

Current, Utilisation category AC- 4A

15

Voltage, Utilisation category DC- 24 VDC

13

Current, Utilisation category DC- 4A

13

Scope of delivery

Scope of delivery Slot covers for dust-proof covering of the openings not in use

Ordering code

Product type description:

AZ 16-(1)ZV(2)K-(3)-(4)-(5)

(1)

without 1 NO contact/1 NC contact

02 2 NC contact

03 3 NC contact

12 1 NO contact/2 NC contacts

(2)

without Ejection force

R Latching force 30 N

(3)

G24 with LED (only available for version with one NO and
one NC contact)
(4)

M16 cable entry M16

M20 Cable entry M20

ST Connector M12, 4 pole, bottom

STL Connector M12, 4 pole, left

STR Connector M12, 4 pole, right

(5)

2254 Latching force 5 N

1762 Front mounting

1637 Gold-plated contacts

Documents

Operating Instructions and Declaration of Conformity (Short)

Operating instructions in short form (For further information and languages, see the "Operation and assembly"
tab) (410.7 kB, 26.10.2022)

UL Certificate

AZ 10 / AZ 15 / AZ 16 / AZ 20 (176.4 kB, 30.11.2023)

AZ 10 / AZ 15 / AZ 16 / AZ 20 (301.3 kB, 04.12.2024)

CCC certification

AZ15, AZ16, AZ17 (941.4 kB, 14.10.2024)

SISTEMA-VDMA library

(1,018.3 kB, 18.02.2025)

Pictures

Product picture (catalogue individual photo)

 ID: kaz16f01
| 471.8 kB | .jpg | 165.806 x 268.817 mm - 470 x 762 px - 72 dpi
| 115.4 kB | .png | 74.083 x 119.944 mm - 210 x 340 px - 72 dpi
| 74.5 kB | .jpg | 76.2 x 123.472 mm - 216 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1az16g01
| 28.1 kB | .cdr |
| 3.1 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi
| 62.3 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi

Switch travel diagram

ID: kaz16s02
| 20.1 kB | .cdr |
| 2.1 kB | .png | 74.083 x 26.106 mm - 210 x 74 px - 72 dpi
| 56.2 kB | .jpg | 352.778 x 123.472 mm - 1000 x 350 px - 72 dpi

Diagram

ID: k2o--k01
| 48.8 kB | .jpg | 352.778 x 125.236 mm - 1000 x 355 px - 72 dpi
| 2.3 kB | .png | 74.083 x 26.458 mm - 210 x 75 px - 72 dpi

System components

Actuator

ACTUATOR AZ 15/16-B1 CPL.

Straight actuator
Particularly suitable for sliding doors
ACTUATOR AZ 15/16-B1-1747 KPL.

For play-free interlocking of light guards

Suitable for retrofitting

ACTUATOR AZ 15/16-B1-2024 KPL.

ACTUATOR AZ 15/16-B1-2053 KPL.

For interlocking of light to medium-weight guards

ACTUATOR AZ 15/16-B1-2177 KPL.

For interlocking of light, unguided guards

ACTUATOR AZ 15/16-B1-2245 KPL.

Damps vibration on guard device

Straight actuator with rubber mounting
Particularly suitable for sliding doors

ACTUATOR AZ 15/16-B2 CPL.

For very smal actuating radii in line with the plane of the actuator

ACTUATOR AZ 15/16-B2-1747 KPL.

For very smal actuating radii in line with the plane of the actuator
Suitable for retrofitting
For play-free interlocking of light guards

ACTUATOR AZ 15/16-B3 CPL.

For very smal actuating radii at 90° to the plane of the actuator
ACTUATOR AZ 15/16-B3-1747 KPL.

For very smal actuating radii at 90° to the plane of the actuator
Suitable for retrofitting
For play-free interlocking of light guards

ACTUATOR AZ 15/16-B6 CPL.

For very smal actuating radii in line with or at 90° to the plane of the actuator

AZ 15/16-B3-1747 RETROFIT KIT

For very smal actuating radii at 90° to the plane of the actuator
Suitable for retrofitting
For play-free interlocking of light guards
The magnetic latch can be easily fitted in any actuating plane

AZ 15/16-B1-1747 RETROFIT KIT

For play-free interlocking of light guards

The magnetic latch can be easily fitted in any actuating plane
Suitable for retrofitting
Straight actuator with magnetic latch
Particularly suitable for sliding doors

AZ 15/16-B1-2024 RETROFIT KIT

For protection against the ingress of course dirt

Straight actuator with slot lip-seal
Particularly suitable for sliding doors

AZ 15/16-B1-2053 RETROFIT KIT

For interlocking of light to medium-weight guards

Straight actuator with ball latch
Particularly suitable for sliding doors
AZ 15/16-B1-2177 RETROFIT KIT

For interlocking of light, unguided guards

AZ 15/16-B2-1747 RETROFIT KIT

For very smal actuating radii in line with the plane of the actuator
Suitable for retrofitting
For play-free interlocking of light guards
The magnetic latch can be easily fitted in any actuating plane

AZ 16-STS30-01

AZ 16-STS30-02

AZ 16-STS30-04

AZ 16-STS30-05

AZ 16-STS30-06
 AZ 16-STS30-07

AZ 16-STS30-08

Accessories

Slot sealing plug AZ 15/16-1476

For protection against the ingress of course dirt

To cover unused actuator slots
Simple clip-in fitting

MOUNTING SET AZ 15/16 P

SET BC 2053-2

Additional ball latch for stable latching of light to medium-weight guards

For separate mounting on the guard

MOUNTING SET AZ 15/16 R/P

 LOCKOUT TAG SZ 16/335

To prevent inadvertent closing, e.g. during maintenance

For complex plant
Prevents actuation of the switch
Up to 6 padlocks can be fitted
The lockout tag can be mounted on a chain near to the safety switch

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical
data can be found in the manual. Technical amendments and errors possible.
Generated on: 02/03/2025, 10:34