Scribd
Upload
63 views1 page

Markforged x7

The X7 (Gen 2) is an industrial-grade 3D printer designed for manufacturing jigs, tools, and end-use parts, offering superior strength and surface finish compared to machined aluminum. It features a build volume of 330 x 270 x 200 mm, advanced printing technologies like Turbo Print and Blacksmith adaptive manufacturing, and supports various materials including plastics and fibers. The printer includes a second-generation extruder, in-process inspection, and operates on a power range of 100–240 VAC.

Uploaded by

bjornchng06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views1 page

Markforged x7

The X7 (Gen 2) is an industrial-grade 3D printer designed for manufacturing jigs, tools, and end-use parts, offering superior strength and surface finish compared to machined aluminum. It features a build volume of 330 x 270 x 200 mm, advanced printing technologies like Turbo Print and Blacksmith adaptive manufacturing, and supports various materials including plastics and fibers. The printer includes a second-generation extruder, in-process inspection, and operates on a power range of 100–240 VAC.

Uploaded by

bjornchng06
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRODUCT SPECIFICATIONS

X7 (Gen 2)
The X7 prints industrial-grade manufacturing jigs, jaws, tools, fixtures, and end-use parts. Designed from the ground up to survive
the production floor environment and capable of printing parts stronger than machined aluminum for a fraction of the cost, the X7
delivers unparalleled surface finish, build size, and reliability. Accelerate part production with Turbo Print, our fastest print mode,
and verify dimensional accuracy with Blacksmith adaptive manufacturing technology — only available on the X7.

Printer Process Fused Filament Fabrication, Continuous Filament Fabrication


Properties
Build Volume 330 x 270 x 200 mm (13 x 10.6 x 7.9 in)

Weight 48 kg (106 lbs)

Machine Footprint 584 x 483 x 914 mm (23 x 19 x 36 in)

Print Bed Kinematic coupling — flat to within 80 μm

Laser In-process inspection, active print calibration, bed leveling

Extrusion System Second-generation extruder, out-of-plastic and out-of-fiber detection

Power 100–240 VAC, 150 W (2 A peak)

RF Module Operating Band 2.4 GHz Wi-Fi Standards 802.11 b/g/n

Materials Plastics Available Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU

Fibers Available Carbon Fiber, Carbon Fiber FR, Fiberglass, Aramid Fiber (Kevlar®),
HSHT Fiberglass

Tensile Strength 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) *

Tensile Modulus 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) *

Part Layer Height 100 μm default, 50 μm minimum, 250 µm maximum


Properties
Infill Closed cell infill: multiple geometries available

Software Eiger Cloud Slicer, part / build management (other options available at cost)

Security Two-factor authentication, org admin access, single sign-on

Blacksmith Adaptive manufacturing platform (additional purchase required)


FRONT VIEW SIDE VIEW

36”

23” 19”
* Continuous carbon fiber data. Note: All specifications are approximate and subject to change without notice.
DupontTM and Kevlar® are trademarks and registered trademarks of E.I. du Pont de Nemours and Company.

REV 4.9 - 2022/11/08 markforged.com


chemtron.asia F-PR-3012
203A Henderson Road, Contact Info:
#02-03 Henderson Industrial Park, Phone: +65-62737252
Singapore 159546 Email: [email protected]

You might also like