Safety Data Sheet

NON-Hazardous, NON-Dangerous Goods

1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION

Product name: Fix ALL High Tack

Synonyms Product Code
Aluminium grey - 290 mL 122006
Beige - 290 mL 122629
Black - 290 mL 101459
Grey - 290 mL 101454
White - 290 mL 101444

Recommended use: Consumer useProfessional useAdhesive sealant

Supplier: Soudal Pty Ltd

ABN: 50 1591 240 53
Street Address: 75 Owen St
Glendenning
NSW 2761
Australia
Telephone: 1300 507 011
Email: [email protected]

Emergency Telephone number: 1300 507 011

2. HAZARDS IDENTIFICATION

Based on available information, this material is not classified as hazardous according to criteria of Safe
Work Australia GHS 7.

Poison Schedule: Unknown

DANGEROUS GOOD CLASSIFICATION

Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods
by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".

3. COMPOSITION INFORMATION

CHEMICAL ENTITY CAS NO PROPORTION

Distillates, petroleum, hydrotreated light paraffinic 64742-55-8 ≥ 1 – < 5 % (w/w)

Trimethoxyvinylsilane Dioctylbis(pent <1 % (w/w)
ane-2,4-
dionato-
O,O’)tin
N-(3-(trimethoxysilyl)propyl)ethylenediamine 1760-24-3 ≥ 0.1 – < 1 %
(w/w)
Dioctylbis(pentane-2,4-dionato-O,O’)tin 54068-28-9 ≥ 0.1 – < 1 %
(w/w)
reaction mass of N, N’-ethane1,2-diylbis(hexanamide) and 12-hydroxy-N-[2- ≥ 1 – < 5 % (w/w)

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 1 of 6
 Safety Data Sheet

[(1-oxyhexyl)amino]ethyl]octadecanamide and N, N’-ethane-1,2-diylbis(12-

hydroxyoctadecan amide)
Ingredients determined to be Non-Hazardous Balance
____________
100%

4. FIRST AID MEASURES

If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800
764 766).

Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and
loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until
fully recovered. Seek medical advice if effects persist.

Skin Contact: If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running
water. If swelling, redness, blistering or irritation occurs seek medical assistance.

Eye contact: If in eyes wash out immediately with water. In all cases of eye contamination it is a sensible
precaution to seek medical advice.

Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink.
Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical
advice.

PPE for First Aiders: Wear overalls, gloves, safety glasses. Available information suggests that gloves made
from nitrile rubber, polyethylene should be suitable for intermittent contact. However, due to variations in glove
construction and local conditions, the user should make a final assessment. Always wash hands before smoking,
eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or
re-using.

Notes to physician: Treat symptomatically.

5. FIRE FIGHTING MEASURES

Hazchem Code: Not applicable.

Suitable extinguishing media: If material is involved in a fire use water fog (or if unavailable fine water spray),
alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).

Specific hazards: Non-combustible material.

Fire fighting further advice: Not applicable.

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILLS
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up
with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.

LARGE SPILLS
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear
protective equipment to prevent skin and eye contamination and the inhalation of dust. Work up wind or increase
ventilation. Cover with damp absorbent (inert material, sand or soil). Sweep or vacuum up, but avoid generating

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 2 of 6
 Safety Data Sheet

dust. Collect and seal in properly labelled containers or drums for disposal. If contamination of crops, sewers or
waterways has occurred advise local emergency services.

Dangerous Goods - Initial Emergency Response Guide No: Not applicable

7. HANDLING AND STORAGE

Handling: Avoid eye contact and repeated or prolonged skin contact. Avoid inhalation of dust.

Storage: Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store
away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition.
Keep container standing upright. Keep containers closed when not in use - check regularly for spills.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

National occupational exposure limits: No value assigned for this specific material by Safe Work Australia.

Biological Limit Values: As per the "National Model Regulations for the Control of Workplace Hazardous
Substances (Safe Work Australia)" the ingredients in this material do not have a Biological Limit Allocated.

Engineering Measures: Natural ventilation should be adequate under normal use conditions.

Personal Protection Equipment: OVERALLS, GLOVES, SAFETY GLASSES.

Personal protective equipment (PPE) must be suitable for the nature of the work and any hazard associated with
the work as identified by the risk assessment conducted.

Wear overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile rubber,
polyethylene should be suitable for intermittent contact. However, due to variations in glove construction and
local conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking
or using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.

Hygiene measures: Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or
smoke. Wash hands prior to eating, drinking or smoking. Avoid contact with clothing. Avoid eye contact and
repeated or prolonged skin contact. Avoid inhalation of dust. Ensure that eyewash stations and safety showers
are close to the workstation location.

9. PHYSICAL AND CHEMICAL PROPERTIES

Form: Solid
Colour: Variable in color, depending on the composition
Odour: Characteristic

Solubility: Organic solvents

Solubility in water: Insoluble
Density: 1.485 g/l (20°C)
Vapour Pressure: N Av
Flammability Limits (%): upper: Not easily combustible
Autoignition Temperature (°C): N Av
Melting Point/Range (°C): N Av
Boiling Point/Range (°C): N Av
Decomposition Point (°C): N Av
Total VOC (g/Litre): <1%
Odour Threshold: N Av

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 3 of 6
 Safety Data Sheet

Explosive properties: No chemical group associated with explosive properties

Oxidising properties: No chemical group associated with oxidising properties

(Typical values only - consult specification sheet)

N Av = Not available, N App = Not applicable

10. STABILITY AND REACTIVITY

Chemical stability: This material is thermally stable when stored and used as directed.

Conditions to avoid: Elevated temperatures and sources of ignition.

Incompatible materials: Oxidising agents.

Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes.

Hazardous reactions: No known hazardous reactions.

11. TOXICOLOGICAL INFORMATION

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the
product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:

Acute Effects

Inhalation: Material may be an irritant to mucous membranes and respiratory tract.

Skin contact: Contact with skin may result in irritation.

Ingestion: Swallowing can result in nausea, vomiting and irritation of the gastrointestinal tract.

Eye contact: May be an eye irritant. Exposure to the dust may cause discomfort due to particulate nature. May
cause physical irritation to the eyes.

Acute toxicity

Inhalation: This material has been classified as not hazardous for acute inhalation exposure. Acute toxicity
estimate (based on ingredients): LC50 > 5.0 mg/L for dust.

Skin contact: This material has been classified as not hazardous for acute dermal exposure. Acute toxicity
estimate (based on ingredients): LD50 > 2,000 mg/Kg bw

Ingestion: This material has been classified as not hazardous for acute ingestion exposure. Acute toxicity
estimate (based on ingredients): LD50 > 2,000 mg/Kg bw

Corrosion/Irritancy: Eye: this material has been classified as not corrosive or irritating to eyes. Skin: this
material has been classified as not corrosive or irritating to skin.

Sensitisation: Inhalation: this material has been classified as not a respiratory sensitiser. Skin: this material has
been classified as not a skin sensitiser.

Aspiration hazard: This material has been classified as not an aspiration hazard.

Specific target organ toxicity (single exposure): This material has been classified as not a specific hazard to
target organs by a single exposure.

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 4 of 6
 Safety Data Sheet

Chronic Toxicity

Mutagenicity: This material has been classified as not a mutagen.

Carcinogenicity: This material has been classified as not a carcinogen.

Reproductive toxicity (including via lactation): This material has been classified as not a reproductive
toxicant.

Specific target organ toxicity (repeat exposure): This material has been classified as not a specific hazard to
target organs by repeat exposure.

12. ECOLOGICAL INFORMATION

Avoid contaminating waterways.

Acute aquatic hazard: This material has been classified as not hazardous for acute aquatic exposure. Acute
toxicity estimate (based on ingredients): > 100 mg/L

Long-term aquatic hazard: This material has been classified as not hazardous for chronic aquatic exposure.
Non-rapidly or rapidly degradable substance for which there are adequate chronic toxicity data available OR in
the absence of chronic toxicity data, Acute toxicity estimate (based on ingredients): >100 mg/L, where the
substance is not rapidly degradable and/or BCF < 500 and/or log Kow < 4.

Ecotoxicity: No information available.

Persistence and degradability: No information available.

Bioaccumulative potential: No information available.

Mobility: No information available.

13. DISPOSAL CONSIDERATIONS

Persons conducting disposal, recycling or reclamation activities should ensure that appropriate personal
protection equipment is used, see "Section 8. Exposure Controls and Personal Protection" of this SDS.

If possible material and its container should be recycled. If material or container cannot be recycled, dispose in
accordance with local, regional, national and international Regulations.

14. TRANSPORT INFORMATION

ROAD AND RAIL TRANSPORT

Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods
by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".

MARINE TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG
Code) for transport by sea.

AIR TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous
Goods Regulations for transport by air.

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 5 of 6
 Safety Data Sheet

15. REGULATORY INFORMATION

This material is not subject to the following international agreements:

Montreal Protocol (Ozone depleting substances)
The Stockholm Convention (Persistent Organic Pollutants)
The Rotterdam Convention (Prior Informed Consent)
Basel Convention (Hazardous Waste)
International Convention for the Prevention of Pollution from Ships (MARPOL)

This material/constituent(s) is covered by the following requirements:

The Standard for the Uniform Scheduling of Medicines and Poisons (SUSMP) established under the Therapeutic
Goods Act (Commonwealth): Unknown.

AICIS Status: All components of this product are listed on or exempt from the Australian Inventory of Industrial
Chemicals (AIIC).

16. OTHER INFORMATION

Reason for issue: 5 Yearly Revision

This information was prepared in good faith from the best information available at the time of issue. It is based on
the present level of research and to this extent we believe it is accurate. However, no guarantee of accuracy is
made or implied and since conditions of use are beyond our control, all information relevant to usage is offered
without warranty. The manufacturer will not be held responsible for any unauthorised use of this information or for
any modified or altered versions.

If you are an employer it is your duty to tell your employees, and any others that may be affected, of any hazards
described in this sheet and of any precautions that should be taken.

Safety Data Sheets are updated frequently. Please ensure you have a current copy.

Product Name: Fix ALL High Tack Reference No:

Issued: 2024-02-15 Version: Page 6 of 6