Scribd
Upload
16 views2 pages

Datasheet - BMF00EJ - 229122 - en Cuidado NPN

The BMF 243K-NS-C-2A-PU-02 is a magnetic field sensor designed for pneumatic cylinders with a C-slot, featuring an assured switching field strength of 2.4 kA/m and a switching frequency of 3000 Hz. It operates within a voltage range of 10 to 30 VDC and is suitable for various environmental conditions, with an IP67 rating. The sensor includes features such as short-circuit protection, polarity reversal protection, and is made from durable materials like PA 12 and stainless steel.

Uploaded by

Jose M. Cruz Jimenez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views2 pages

Datasheet - BMF00EJ - 229122 - en Cuidado NPN

The BMF 243K-NS-C-2A-PU-02 is a magnetic field sensor designed for pneumatic cylinders with a C-slot, featuring an assured switching field strength of 2.4 kA/m and a switching frequency of 3000 Hz. It operates within a voltage range of 10 to 30 VDC and is suitable for various environmental conditions, with an IP67 rating. The sensor includes features such as short-circuit protection, polarity reversal protection, and is made from durable materials like PA 12 and stainless steel.

Uploaded by

Jose M. Cruz Jimenez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Magnetic Sensors

BMF 243K-NS-C-2A-PU-02
Order Code: BMF00EJ

1) Sensing surface

Basic features Electrical data


Application Pneumatic cylinder with C-slot, Assured switching field strength Ha 2.4 kA/m
e.g. SMC, Festo*, Schunk, Hysteresis H max. (% of Hn) 45 %
Sommer, Gimatic (*not suitable Load capacitance max. at Ue 0.45 µF
for Festo Series ADVC and
No-load current Io max., undamped 4.5 mA
AEVC)
Operating voltage Ub 10...30 VDC
Approval/Conformity cULus
Output resistance Ra Open drain
CE
WEEE Rated insulation voltage Ui 75 V DC
EAC Rated operating current Ie 100 mA
Basic standard IEC 60947-5-2 Rated operating voltage Ue DC 24 V
Principle of operation Magnetic field sensor Rated short circuit current 100 A
Scope of delivery Cable clip for C-slot Rated switch field strength Hn 2 kA/m
Offset screwdriver DIN 911 size Residual current Ir max. 40 µA
0.9 Ripple max. (% of Ue) 15 %
Trademark Global Switching frequency 3000 Hz
Turn-off delay toff max. 0.07 ms
Display/Operation Turn-on delay ton max. 0.07 ms
Utilization category DC -13
Function indicator yes
Voltage drop static max. 2V

Electrical connection
Environmental conditions
Cable PUR, 2 m
Ambient temperature -25...85 °C
Cable diameter D 2.40 mm
Contamination scale 3
Conductor cross-section 0.10 mm²
EN 60068-2-27, Shock Half-sinus, 30 gn, 11 ms
Number of conductors 3
EN 60068-2-6, Vibration 55 Hz, amplitude 1 mm, 3x30 min
Polarity reversal protected yes
ESD 3A(8KV)
Protection against device mix-ups yes
Emission Group 1, Class B
Short-circuit protection yes
IP rating IP67

1/2
Internet www.balluff.com eCl@ss 9.1: 27-27-01-04
Subject to change without notice: 229122 ETIM 6.0: EC002544
BMF00EJ_0.7_2021-03-13
Magnetic Sensors
BMF 243K-NS-C-2A-PU-02
Order Code: BMF00EJ

Material Output/Interface
Clamping screw material Stainless steel Switching output NPN normally open (NO)
Housing material PA 12
Jacket material PUR Range/Distance
Material sensing surface PA 12
Temp. drift max. (% of Hn) 0.3 %

Mechanical data
Dimension 24 x 3 x 3.75 mm
Mounting can be installed in C-slot from
above
Tightening torque 0.07 Nm

Remarks
The sensor is functional again after the overload has been eliminated.
889416

Wiring Diagrams

2/2
Internet www.balluff.com eCl@ss 9.1: 27-27-01-04
Subject to change without notice: 229122 ETIM 6.0: EC002544
BMF00EJ_0.7_2021-03-13

You might also like