SCS230AE2

SiC Schottky Barrier Diode Datasheet

lOutline
TO-247N
VR 650V
IF 15A/30A*
QC 23nC(Per leg)
(*Per leg/ Both legs) (3)
(1) (2)

lFeatures lInner circuit

1) Low forward voltage

2) Negligible recovery time/current

(1) Anode
3) Temperature independent switching behavior (2) Cathode
(3) Anode

(1) (2) (3)

lApplications lPackaging specifications

・ Switch Mode Power Supply Package TO-247N

・ Uninterruptible Power Supply Packing Tube

・ Solar Inverter Reel size (mm) -

・ Motor Drive Tape width (mm) -

Type
・ Air Conditioner Basic ordering unit (pcs) 30

・ EV Charger Packing code C11

Marking SCS230AE2
lAbsolute maximum ratings (Tvj = 25°C)
Parameter Symbol Value Unit
Reverse voltage (repetitive peak) VRM 650 V
Reverse voltage (DC) VR 650 V
Continuous forward current *3 (Tc= 134°C) IF 15/30 A
PW=10ms sinusoidal, Tvj=25°C 52/100 A
Surge non-
repetitive forward PW=10ms sinusoidal, Tvj=150°C IFSM 41/82 A
current *3 PW=10ms square, Tvj=25°C 200/400 A
Repetitive peak forward current *3 IFRM 65/130 *1 A
2
PW=10ms, Tvj=25°C 13/55 As
i2t value *3 PW=10ms, Tvj=150°C
∫i2dt 8.4/33 2
As
Total power dissipation *3 PD 110/230 *2 W
Virtual Junction temperature Tvj 175 °C
Range of storage temperature Tstg -55 to +175 °C
*1 Tc=100°C, Tvj=150°C, Duty cycle=10% *2 Tc=25°C *3 Per leg/ Both legs

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・14・001 1/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lElectrical characteristics (Tvj = 25°C) (Per Leg)

Values
Parameter Symbol Conditions Unit
Min. Typ. Max.

DC blocking voltage VDC IR =3.0mA 650 - - V

IF=15A,Tvj=25°C - 1.35 1.55 V

Forward voltage VF IF=15A,Tvj=150°C - 1.55 - V

IF=15A,Tvj=175°C - 1.63 - V

VR=600V,Tvj=25°C - 3 300 mA

Reverse current IR VR=600V,Tvj=150°C - 45 - mA

VR=600V,Tvj=175°C - 105 - mA

VR=1V,f=1MHz - 550 - pF
Total capacitance C
VR=600V,f=1MHz - 56 - pF

Total capacitive charge QC VR=400V,di/dt=350A/ms - 23 - nC

Switching time tC VR=400V,di/dt=350A/ms - 18 - ns

lThermal characteristics
Values
Parameter Symbol Conditions Unit
Min. Typ. Max.

Per Leg - 1.1 1.3 K/W

Thermal resistance RthJC
Both Legs - 0.55 0.63 K/W

lTypical Transient Thermal Characteristics (Per Leg)

Symbol Value Unit Symbol Value Unit
-1 -3
Rth1 2.90×10 Cth1 2.33×10
-1 -3
Rth2 8.03×10 K/W Cth2 8.15×10 Ws/K
-3 -1
Rth3 8.54×10 Cth3 5.82×10

Tj Rth1 Rth,n Tc

PD Cth1 Cth2 Cth,n

Ta

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 2/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lElectrical characteristic curves

Fig.1 VF - IF Characteristics (Per Leg) Fig.2 VF - IF Characteristics (Per Leg)

100
Pulsed Pulsed Tvj= -25ºC
20
Tvj=25ºC
10

Forward Current : IF [A]

Forward Current : IF [A]

15 Tvj=175ºC
1
Tvj=125ºC
10
0.1 Tvj= -25ºC Tvj=75ºC
Tvj=25ºC

Tvj=75ºC 5
0.01
Tvj=125ºC
Tvj=175ºC
0.001 0
0.0 0.5 1.0 1.5 2.0 2.5 0.0 0.5 1.0 1.5 2.0 2.5

Forward Voltage : VF [V] Forward Voltage : VF [V]

Fig.3 VR - IR Characteristics (Per Leg) Fig.4 VR - Ct Characteristics (Per Leg)

1000 1000
Capacitance Between Terminals : Ct [pF]

Tvj=175ºC

100 Tvj=125ºC
Reverse Current : IR [mA]

Tvj=75ºC
10 100
Tvj=25ºC

0.1 10

0.01
Tvj= -25ºC Tvj=25ºC
f=1MHz
0.001 1
0 200 400 600 0.01 0.1 1 10 100 1000

Reverse Voltage : VR [V] Reverse Voltage : VR [V]

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 3/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lElectrical characteristic curves

Fig.5 Typical Transient Thermal Impedance Fig.6 Power Dissipation (Per Leg)
vs. Pulse Width (Per Leg)
Transient Thermal Impedance : ZthJC [K/W]

10 140
Tc=25ºC
Single Pulse
120

Power Dissipation [W]

100
1

80

60
0.1
40

20

0.01 0
1.E-4 1.E-3 1.E-2 1.E-1 1.E+0 1.E+1 25 50 75 100 125 150 175

Pulse Width : PW [s] Case Temperature : Tc [ºC]

Fig.8*5 Typical peak forward current

Fig.7*4 Maximum peak forward current derating curve IP - Tc
derating curve IP - Tc (Per Leg) (Per Leg, Not guaranteed)

140 140
Duty=0.1
Peak Forward Current : IP [A]

120 120
Peak Forward Current : IP [A]

100 Duty=0.1 100 Duty=0.2

80 Duty=0.2 80
Duty=0.5
60 60
Duty=0.5
40 40

20 20 Duty=0.8
Duty=0.8 D.C. D.C.
0 0
25 50 75 100 125 150 175 25 50 75 100 125 150 175

Case Temperature : Tc [ºC] Case Temperature : Tc [ºC]

*4 Based on max Vf, max RthJC *5 Based on typ Vf, typ RthJC
Valid for switching of above 10kHz, Typical value, not guaranteed
excluding D.C. curve. Valid for switching of above 10kHz,
excluding D.C. curve

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 4/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lElectrical characteristic curves

Fig.9 Surge non-repetitive forward current Fig.10 Typical capacitance store energy
vs. Pulse width (Sinusoidal waveform) (Per Leg) (Per Leg)
Surge non-repetitive forward current : IFSM [A]

1000 14

Capacitance stored energy : EC[mJ]

12

10

8
100
6

Tvj=25ºC 2
Single Pulse
10 0
0.00001 0.0001 0.001 0.01 0 200 400 600

Pulse Width : PW [s] Reverse Voltage : VR [V]

lSymplified forward characteristic model (Per Leg)

Fig.11 Equivalent forward current curve

VF = Vth + Rdiff IF

Vth ( Tvj ) = a0 + a1 Tvj

Rdiff ( Tvj ) = b0 + b1 Tvj + b2 Tvj2
Forward Current : IF

Symbol Typical Value Unit

-1
a0 9.35×10 V
-3
a1 -1.12×10 V/°C

Vth 1/Rdiff b0 2.65×10 -2

Ω

b1 6.80×10 -5
Ω/°C
-7 2
b2 7.20×10 Ω/°C

Forward Voltage : VF Tvj in ºC; -55 ºC < Tvj < 175 ºC ; IF < 30 A

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 5/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lPackage Dimensions

Unit: mm

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 6/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

Unit: mm

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 7/8 6.May.2022 - Rev.002
 SCS230AE2 Datasheet

lDie Bonding Layout

:Die position

・Front view of the packaging.

・Dimensions are design values.

・If the heat sink is to be installed, it should be in contact with the die bonding point.

Unit: mm

www.rohm.com
© 2022 ROHM Co., Ltd. All rights reserved.
TSQ50215-SCS230AE2
TSZ22111・15・001 8/8 6.May.2022 - Rev.002
 Notice

Notes
1) The information contained herein is subject to change without notice.

2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions.

3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.

4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.

5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.

6) The Products specified in this document are not designed to be radiation tolerant.

7) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, and power transmission systems.

8) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.

9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.

10) ROHM has used reasonable care to ensure the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.

11) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.

12) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.

13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact us.

ROHM Customer Support System

http://www.rohm.com/contact/
 Datasheet

General Precaution
1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.

3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or
concerning such information.

Notice – WE Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.