Scribd
Upload
35 views6 pages

Leyland Water Pump Seal

The Type 6A Elastomer Bellows Seal is widely used in engine coolant pumps and has over 40 years of proven design. It operates effectively under temperatures from -40°C to 205°C and pressures up to 5 bar, with a maximum speed of 10,000 rpm. The seal features a unitized design with various material options for components, ensuring versatility in application.

Uploaded by

P M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views6 pages

Leyland Water Pump Seal

The Type 6A Elastomer Bellows Seal is widely used in engine coolant pumps and has over 40 years of proven design. It operates effectively under temperatures from -40°C to 205°C and pressures up to 5 bar, with a maximum speed of 10,000 rpm. The seal features a unitized design with various material options for components, ensuring versatility in application.

Uploaded by

P M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

6A

TYPE 6A
Elastomer Bellows Seal

A – Face/Primary Ring
B – Seat/Mating Ring
C – Elastomer Bellows
D – Spring
E – Cup Ring
F – Unitizer Sleeve A
G – Retainer

B
C

D E

Product Description Performance Capabilities


■ Specified in more engine coolant pumps than any other ■ Temperature:
seal from any manufacturer. -40°C to 205°C/-40°F to 400°F
■ Basic design concept has been proven with over (depending on materials used)
40 years of successful application to OEM engine ■ Pressure:
coolant pumps. Vacuum to 5 bar g/75 psig
■ High volume use in low pressure, small diameter rotary ■ Speed:
shaft applications; small centrifugal water pumps, deep Up to 10,000 rpm
and shallow well jet pumps, internal combustion engine (depending on seal size and face materials)
coolant pumps, and swimming pool pumps. Up to 13 m/s /2500 fpm
■ End Play/Axial Float Allowance:
0.127mm/0.005" FIM max.
Design Features ■ Shaft Runout:
■ Fully Unitized Designs Available 0.05mm per mm/0.002" per inch of shaft
diameter FIM max.
■ One-Piece Construction
■ Flexible Elastomer Bellows
■ Dent and Groove Positive Drive Arrangement
■ Rotating Mating Ring
TYPE 6A
6A
Elastomer Bellows Seal

Type 6A Typical Arrangement/Dimensional Data


Unitized Seal with ID Sealed Positive Drive Mating Ring

L1 L2
± 0.127mm/0.005"
WORKING HEIGHT

D3

D2 D4
± 0.025mm/0.001"
BORE

L3 D1
± 0.0076mm/0.0003"
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
12.037 29.95 34.92 25.91 8.51 9.40 17.96 — 0.4739 1.179 1.375 1.020 0.335 0.370 0.707 —
12.700 39.50 43.64 27.53 9.86 7.92 17.73 — 0.5000 1.555 1.718 1.084 0.388 0.312 0.698 —
15.918 36.47 41.28 28.91 8.59 11.50 19.05 — 0.6267 1.436 1.625 1.138 0.338 0.453 0.750 —
19.113 40.03 43.64 33.88 9.52 12.50 23.00 — 0.7525 1.576 1.718 1.334 0.375 0.492 0.906 —

Two-Piece Seal with Optional Ferrules and OD Cup Mounted Mating Ring

L1 L2 L3
± 0.51mm/
0.020"
WORKING
HEIGHT

D3
D2
± 0.025mm/0.001" D4
BORE ± 0.051mm/0.002"
BORE

L4 D1
MAX.
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
9.65 28.57 31.75 22.22 7.92 1.57 5.54 7.92 0.380 1.125 1.250 0.875 0.312 0.062 0.218 0.312
12.83 28.57 34.92 25.40 8.74 5.16 5.54 7.92 0.505 1.125 1.375 1.000 0.344 0.203 0.218 0.312
16.13 36.47 42.28 31.75 8.59 6.73 8.71 10.31 0.635 1.436 1.625 1.250 0.338 0.265 0.343 0.406
19.30 40.03 43.64 34.92 9.52 5.97 7.92 10.31 0.760 1.576 1.718 1.375 0.375 0.235 0.312 0.406

*Designs for other bore sizes are available.


TYPE 6A
Elastomer Bellows Seal

Type 6A Typical Arrangement/Dimensional Data


Two-Piece Seal without Optional Ferrules and ID Cup Mounted Mating Ring

L1 L2 L4
± 0.51mm/
0.020"
WORKING
HEIGHT

D3
D2
± 0.025mm/0.001"
BORE D4

L3 D1
± 0.051mm/0.002"
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
12.70 28.57 34.92 23.47 8.74 5.16 5.03 5.41 0.500 1.125 1.375 0.924 0.344 0.203 0.198 0.213
15.00 35.94 40.89 26.64 9.45 6.05 5.03 5.41 0.590 1.415 1.610 1.049 0.372 0.238 0.198 0.213
15.88 36.47 42.28 28.57 8.59 6.73 5.03 5.41 0.625 1.436 1.625 1.125 0.338 0.265 0.198 0.213
19.05 40.03 43.64 30.15 9.52 5.97 5.16 5.54 0.750 1.576 1.718 1.187 0.375 0.235 0.203 0.218

Unitized Seal with OD Cup Mounted Mating Ring

L1 L2
± 0.127mm/0.005"
WORKING HEIGHT

D3
D2
± 0.025mm/0.001" D4
BORE

L3 D1
± 0.0076mm/0.0003"
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
12.037 28.57 34.92 25.91 8.74 10.80 20.40 — 0.4739 1.125 1.375 1.020 0.344 0.425 0.803 —
15.918 36.47 41.28 28.19 8.59 11.30 19.56 — 0.6267 1.436 1.625 1.110 0.338 0.445 0.770 —

*Designs for other bore sizes are available.


TYPE 6A
Elastomer Bellows Seal

Type 6A Typical Arrangement/Dimensional Data


Unitized Seal with ID Driven Mating Ring

L1 L2
± 0.127mm/0.005"
WORKING HEIGHT

D3

D2
± 0.025mm/0.001"
BORE

CUT LINE FOR SHORT PAGE


D4

L3 D1
± 0.0076mm/0.0003"
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
12.000 28.57 31.75 25.15 8.74 9.40 17.60 — 0.4724 1.125 1.250 0.990 0.344 0.370 0.693 —
12.037 28.57 34.92 23.80 8.74 9.40 17.91 — 0.4739 1.125 1.375 0.937 0.344 0.370 0.705 —
12.700 28.57 31.75 25.15 8.74 9.40 17.60 — 0.5000 1.125 1.250 0.990 0.344 0.370 0.693 —
15.000 35.94 40.89 38.10 9.45 11.43 20.65 — 0.5906 1.415 1.610 1.500 0.372 0.450 0.813 —
15.918 36.47 41.28 26.67 8.59 11.30 19.56 — 0.6267 1.436 1.625 1.050 0.338 0.445 0.770 —
19.113 40.03 43.13 31.75 10.31 11.10 23.00 — 0.7525 1.576 1.698 1.250 0.406 0.437 0.906 —

Unitized Seal with ID Driven Banded Mating Ring

L1 L2
± 0.127mm/0.005"
WORKING HEIGHT

D3

D2
± 0.025mm/0.001"
BORE D4

D1
L3 ± 0.0076mm/0.0003"
SHAFT

Type 6A Dimensional Data* (mm) Type 6A Dimensional Data* (inches)


D1 D2 D3 D4 L1 L2 L3 L4 D1 D2 D3 D4 L1 L2 L3 L4
10.000 29.95 35.00 21.50 8.51 5.09 13.60 — 0.3937 1.179 1.378 0.846 0.335 0.200 0.535 —
12.000 29.95 34.00 26.35 8.71 9.40 17.60 — 0.4724 1.179 1.339 1.037 0.343 0.370 0.693 —
12.037 29.95 34.92 25.35 8.74 9.40 18.06 — 0.4739 1.179 1.375 0.998 0.344 0.370 0.711 —
12.700 29.95 34.11 26.35 8.71 8.89 17.60 — 0.5000 1.179 1.343 1.037 0.343 0.350 0.693 —
15.000 35.94 40.89 30.60 9.45 11.43 20.65 — 0.5906 1.415 1.610 1.205 0.372 0.450 0.813 —
15.918 36.47 41.28 30.60 8.59 12.45 19.56 — 0.6267 1.436 1.625 1.205 0.338 0.490 0.770 —

*Designs for other bore sizes are available.


TYPE 6A
Elastomer Bellows Seal

Materials of Construction

SEAL COMPONENTS MATERIALS

Description Standard Options


Face/Primary Ring Cranecarb Carbon
Silicon Carbide

Seat/Mating Ring Alumina Ceramic (Plain) Alumina Ceramic (Banded)


Sintered Steel
Silicon Carbide

Retainer 18-8 Stainless Steel 316 Stainless Steel


Brass
CUT LINE FOR SHORT PAGE

Bellows Buna-N Fluoroelastomer


Cup Ring Ethylene Propylene
Highly Saturated Nitrile

Spring Plated Carbon Steel 18-8 Stainless Steel


316 Stainless Steel

Horsepower Consumption

Horsepower (hp) at 1800 rpm Horsepower (watt)


0.07

0.06 .0 00" 40
m/1
25m
5"
/0 .87
0.05 mm
22
50"
m /0.7 30
18m
0.04
"
/0 .625
1 6mm
0.03 20

0.02 "
/0.500
13mm
10
0.01

0 0
1.0 1.5 2.0 3.0 3.5 4.0 5.0 (bar g)

10 20 30 40 50 60 70 (psig)
Pressure
TYPE 6A
Elastomer Bellows Seal

John Crane
North America Europe, Middle East, Africa Latin America Asia Pacific
Morton Grove, Illinois USA Slough, UK São Paulo, Brazil Singapore
Tel: 1-847-967-2400 Tel: 44-1753-224000 Tel: 55-11-3049-9900 Tel: 65-222-9161
Fax: 1-847-967-3915 Fax: 44-1753-224224 Fax: 55-11-3849-8270 Fax: 65-223-5035
1-800-SEALING

For your nearest John Crane facility, please contact one of the locations above.
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use.
In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while handling
products made from PTFE. Old and new PTFE products must not be incinerated.
©2000 John Crane Print 10/00 www.johncrane.com ISO Certified S-6A

You might also like