IECEx Certificate

of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification System for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

Certificate No.: IECEx IBE 14.0035 Page 1 of 5 Certificate history:

Issue 6 (2020-07-27)
Status: Current Issue No: 7 Issue 5 (2019-11-08)
Issue 4 (2018-08-30)
Date of Issue: 2021-10-18 Issue 3 (2017-08-31)
Issue 2 (2016-03-15)
Applicant: R. STAHL Schaltgeräte GmbH Issue 1 (2015-10-30)
Am Bahnhof 30 Issue 0 (2014-08-25)
74638 Waldenburg
Germany

Equipment: LED Linear Luminaire

Optional accessory: 6002/1., 6002/2. and 6002/4.

Type of Protection: Increased safety "e" in combination with flameproof enclosure "d", encapsulation "m" and intrinsic safety "i"
or dust ignition protection by enclosure "t", inherently safe optical radiation "op is"

Marking: Ex db eb op is IIB+H2 T4 Gb (type 6002/1.)

Ex db eb op is IIC T4 Gb (type 6002/2.)
Ex db eb ib mb op is IIC T4 Gb (type 6002/4. with Ex-i module 6047)
Ex db eb ib op is IIC T4 Gb (type 6002/4. with LED control gear 6045/3)
Ex tb op is IIIC T100°C Db (all types)
-40 °C ≤ Ta ≤ +60 °C (max.; depends on type)

Approved for issue on behalf of the IECEx Dipl.-Ing. Alexander Henker

Certification Body:

Position: Deputy Head of Certification Body

Signature:
(for printed version)

Date:
(for printed version)

1. This certificate and schedule may only be reproduced in full.

2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting www.iecex.com or use of this QR Code.

Certificate issued by:

IBExU Institut für Sicherheitstechnik GmbH

Fuchsmühlenweg 7
09599 Freiberg
Germany
 IECEx Certificate
of Conformity
Certificate No.: IECEx IBE 14.0035 Page 2 of 5

Date of issue: 2021-10-18 Issue No: 7

Manufacturer: R. STAHL Schaltgeräte GmbH

Am Bahnhof 30
74638 Waldenburg
Germany

Manufacturing R. STAHL Schaltgeräte GmbH R. STAHL (P) LTD.

locations: Nordstraße 10 Plot No. -5, Malrosapuram Road
99427 Weimar Sengundram Ind. Area
Germany Singaperumal Koil, Kanacheepuram
Dist.
Talmilnadu - 603204
India

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended

STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards

IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements

Edition:7.0

IEC 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
Edition:7.0

IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
Edition:6.0

IEC 60079-18:2017 Explosive atmospheres - Part 18: Protection by encapsulation "m"

Edition:4.1

IEC 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
Edition:2

IEC 60079-31:2013 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
Edition:2

IEC 60079-7:2017 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
Edition:5.1

This Certificate does not indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.

TEST & ASSESSMENT REPORTS:

A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:

Test Reports:
DE/IBE/ExTR13.0058/00 DE/IBE/ExTR13.0058/01 DE/IBE/ExTR13.0058/02
DE/IBE/ExTR13.0058/03 DE/IBE/ExTR13.0058/04 DE/IBE/ExTR13.0058/05
DE/IBE/ExTR13.0058/06 DE/IBE/ExTR13.0058/07

Quality Assessment Report:

DE/BVS/QAR10.0002/17
 IECEx Certificate
of Conformity
Certificate No.: IECEx IBE 14.0035 Page 3 of 5

Date of issue: 2021-10-18 Issue No: 7

EQUIPMENT:
Equipment and systems covered by this Certificate are as follows:

The LED Linear Luminaire of type 6002/1., 6002/2. and 6002/4. is intended for use in areas with potentially explosive gas and dust
atmospheres that require equipment protection level (EPL) Gb, Gc, Db or Dc. The luminaire consists of a polyester enclosure, an assembly
plate / reflector with LED modules, LED control gear and terminals, and a light-transmitting cover made of polycarbonate. The luminaire is
intended for indoor and outdoor use.

In luminaire type 6002/1. and 6002/2. separately certified LED assemblies with high-power LEDs are applied. The LEDs are protected in type
of protection flameproof enclosure “db”.

In luminaire type 6002/4. integral LED modules with mid-power LEDs are applied. The individual LEDs are protected in type of protection
intrinsic safety “ib”, which is provided in combination with a separately certified Ex-i module (current limiter).

The Ex-i module can be implemented as separate component (type 6047) or as integrated part of the LED control gear (type 6045/3).

In addition to white LEDs, mid-power LEDs with different colors (red, amber, green and blue) can be applied.

Technical data:

Nominal input voltage: 110 V...240 V AC; 110 V...250 V DC for types 6002/1. and /2.
100 V...277 V AC; 141 V...272 V DC*

110 V...240 V AC; 110 V...250 V DC for type 6002/4.

100 V...240 V AC; 110 V...250 V DC**
220 V...240 V AC; 194 V...250 V DC***

Rated input power: 28 W / 30 W* (luminaire size 2)

52 W / 54 W* (luminaire size 4 / size 6)

Through-wiring: up to 3 x 16 A

Optional DALI interface: ≤ 22.5 V DC; typ. ≤ 2 mA (250 mA short-time)

(acc. to IEC 62386-207)

Control input of integrated 220 V...240 V AC; 194 V...250 V DC;

control unit (ADR; optional): 1 mA (at 230 V AC)

Ambient temperature: -40 °C…+60 °C (max.; depends on type)

(*) only for LED control gear 6062/.9.-24.-11.-99.

(**) only for LED control gear 6045/2 and 6045/3..-1

(***) only for LED control gear 6045/2..-..2 and 6045/3..-1.2 with integrated control unit (ADR)

Detailed information regarding technical data and luminaire variants is mentioned in the Annex.

SPECIFIC CONDITIONS OF USE: NO

 IECEx Certificate
of Conformity
Certificate No.: IECEx IBE 14.0035 Page 4 of 5

Date of issue: 2021-10-18 Issue No: 7

Equipment (continued):

Safety instructions:

The plastic housing has to be protected against intense electrostatic charging processes. Cleaning is permitted only with a damp cloth.
 IECEx Certificate
of Conformity
Certificate No.: IECEx IBE 14.0035 Page 5 of 5

Date of issue: 2021-10-18 Issue No: 7

DETAILS OF CERTIFICATE CHANGES (for issues 1 and above)

The luminaire type 6002/4. can also be equipped with a new LED control gear type 6045/3..-1 with integrated Ex-i module.

Corresponding change of marking

The luminaire type 6002 can also be equipped with a new integral thread adapter for connection of a separately certified protective vent.

Conformity with current standard IEC 60079-18:2017 (Ed. 4.1)

Annex:

Annex_to_IBE14.0035_7.pdf
 IECEx Certificate
of Conformity - Annex
Certificate No: IECEx IBE 14.0035 Issue No: 7

Date of Issue: 2021-10-18 Page 1 of 2

Additional technical information

Variants
Type 6002/1. and 6002/2. (with high-power LEDs)
Luminaire type 6002/11. 6002/12. 6002/16. 6002/17.
6002/21. 6002/22. 6002/26. 6002/27.
Number of LED 2 4 2 4
assemblies (24 LEDs) (48 LEDs) (24 LEDs) (48 LEDs)
Rated input power 28 W 52 W 28 W 52 W
(30 W (5)) (54 W (5))
Luminaire size (4) Size 2 Size 4 Size 2 Size 4
LED control gear 6045/11. 6045/11.
(Nominal input (110 V…240 V AC; 110 V…250 V DC) (110 V…240 V AC; 110 V…250 V DC)
voltage) 6062/.9.-.3.-11.-99.
(220 V…240 V AC; 200 V…250 V DC)
6062/.9.-24.-11.-99.
(100 V…277 V AC; 141 V…272 V DC)
Ambient -40 °C…+60 °C (2) LED control gear Ta
temperature Ta -40 °C…+50 °C (3) 6045/11. -30 °C…+60 °C (2)
-30 °C…+50 °C (3)
6062/.9.-.3. -30 °C…+55 °C (1)
-30 °C…+50 °C (3)
6062/.9.-24. -30 °C…+55 °C (2)
-30 °C…+50 °C (3)
LED assembly 6062/19. – 090 – 000 – … (type 6002/1.)
FB107009_1_170526 | Vorlage: 00VD002v170_170117 | öffentlich

6062/29. – 090 – 000 – … (type 6002/1. and 6002/2.)

Group IIB+H2 and IIIC (type 6002/1.)
IIC and IIIC (type 6002/2.)
 IECEx Certificate
of Conformity - Annex
Certificate No: IECEx IBE 14.0035 Issue No: 7

Date of Issue: 2021-10-18 Page 2 of 2

Type 6002/4. (with mid-power LEDs)

Luminaire type 6002/412. 6002/414. 6002/418. 6002/419.
6002/416.
LED module 24 x 4 LEDs or 48 x 4 LEDs or 24 x 4 LEDs or 48 x 4 LEDs or
configuration (6) 24 x 5 LEDs 48 x 5 LEDs 24 x 5 LEDs 48 x 5 LEDs
- White LEDs - (one LED module) (two LED modules) (one LED module) (two LED modules)
LED module 20 x 5 LEDs 40 x 5 LEDs 20 x 5 LEDs 40 x 5 LEDs
configuration (6) “PC amber”, “blue”, “red”, “PC amber”, “PC amber”, “blue”, “red”, “PC amber”,
- Color LEDs - “green”(7) “blue”, “green”(7) “green”(7) “blue”, “green”(7)
(one LED module) (two LED modules) (one LED module) (two LED modules)
Rated input power 28 W 52 W 28 W 52 W
Luminaire size (4) Size 2 Size 4 (6002/414.) Size 2 Size 4
Size 6 (6002/416.)
LED control gear 6045/11. (110 V…240 V AC; 110 V…250 V DC)
(Nominal input 6045/21., 6045/31.-1 (100 V…240 V AC; 110 V…250 V DC)
voltage) 6045/21.-..2, 6045/31.-1.2 (220 V…240 V AC; 194 V…250 V DC)
with integrated control unit (ADR)
Ambient -40 °C…+60 °C (2), (8) -30 °C…+60 °C (2), (8)
temperature Ta -40 °C…+50 °C (3) -30 °C…+50 °C (3)
for 6002/416: -20 °C…+60 °C (2), (8)
-20 °C…+50 °C (3)
Group IIC and IIIC
(1) with through-wiring 3 x 8 A
(2) with through-wiring 3 x 10 A
(3) with through-wiring 3 x 16 A
FB107009_1_170526 | Vorlage: 00VD002v170_170117 | öffentlich

(4) Size 2: 700 mm × 184 mm × 125 mm (width × depth × height)

Size 4: 1310 mm × 184 mm × 125 mm (width × depth × height)
Size 6: 1610 mm × 184 mm × 125 mm (width × depth × height)
(5) with LED control gear 6062/.9.-24.-11.-99.
(6) [Number of LED blocks connected in series] x [Number of parallel LEDs per block]
(7) A combination of green mid-power LEDs with white mid-power LEDs is possible.
(8) not for variant with green mid-power LEDs