JADAVPUR UNIVERSITY

SUB:-QUANTITY SURVEY SESSIONAL

NAME :- SHYAM SUNDAR BHATTACHARYYA; ROLL- 001810403031 ; CLASS :- 3rd YEA
NAME OF THE WORK :- PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS, KOLKA
ABSTRACT OF COST
SL.
SECTION
NO
1 BUILDING WORK
2 SANITARY & PLUMBING WORK
3 ELECTRICAL WORK (15% OF BUILDING WORK)
4 FIRE WORK (10% OF BUILDING WORK)
5 SUB TOTAL OF THE COST OF SL. NO. 1 TO 4 (A)
6 12% GST ON SL. NO. 5 (B)
7 SUB TOTAL OF A & B
8 LABOUR WELFARE CESS @ 1% ON SL.NO. 7
9 CONTINGENCY 3% ON SL.NO. 7
10 TOTAL COST OF THE PROJECT
(Say)

Prepared By Checked By
Shyam Sundar Bhattacharyya
Roll No :- 001810403031
Class :- 3rd Year, 2nd Sem

Page 1 of 33
AVPUR UNIVERSITY
ANTITY SURVEY SESSIONAL
RYYA; ROLL- 001810403031 ; CLASS :- 3rd YEAR 2nd SEM
OSTEL BUILDING FOR 75 NOS STUDENTS, KOLKATA
BSTRACT OF COST
AMOUNT

Rs. 18,070,562.79
Rs. 1,164,037.00
Rs. 2,710,584.42
Rs. 1,807,056.28
Rs. 23,752,240.49
Rs. 2,850,268.86
Rs. 26,602,509.35
Rs. 266,025.09
Rs. 798,075.28
###
###

Page 2 of 33
 QUANTITY SURVEY SESSIONAL

JADAVPUR UNIVERSITY
NAME:- SHYAM SUNDAR BHATTACHARYYA; ROLL-001810403031; CLASS :- 3rd YEAR 2nd SEM
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty

Surface Dressing of the ground in any kind of soil including removing

1 B-2,a-1 vegetation inequalities not exceeding 15 cm depth and disposal of the 1288.00 Sqm Rs. 10.00 Rs. 12,880.00
rubbish within a lead upto 75 m as directed.

Pre-Constructional Anti-termite measures:

(d) Treatment to the back filling of R.C.C. foundation with chemical
emulsion by admixing chloropyrofos emulsifiable concentrate (1%
concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the
2 B-5-10 967.20 Sqm Rs. 137.00 Rs. 132,506.40
vertical surface of the substructure of each side of the foundation. The
work shall be carried out as per specification as described in para 6.3.1 of
code IS6313 (part-II) 1981 (Mode of measurement will be per sq.m. of
vertical area of foundation treated).

Earth work in excavation of foundation trenches or drains, in all sorts of

soils (including mixed soil but excluding laterite or sandstone) including
removing, spreading or stacking the spoils within a lead of 75 m.as
3 B-2,a-1
directed. The item includes necessary trimming the sides of trenches.
Leveling, dressing and ramming the bottom, bailing out water etc. as
required complete.

3.1 a) Depth of excavation not exceeding 1.5m 707.93 Cum Rs. 119.27 Rs. 84,434.81
3.2 b) Depth of excavation from 1.5m to 2m 209.56 Cum Rs. 192.38 Rs. 40,315.15
Earth work in filling in foundation trenches or plinth with good earth, in
layers not exceeding 150 mm. Including watering and ramming etc. layer
4 B-3,a-1 by layer complete.
a) With earth obtained from excavation of foundation.

1/5th of excavation 183.50 Cum Rs. 77.54 Rs. 14,228.43

Filling in foundation or plinth by silver sand in layers not exceeding 150

mm as directed and consolidating the same by thorough saturation with
5 B-4,a-2 1214.74 Cum Rs. 936.21 Rs. 1,137,253.61
water, ramming complete including the cost of supply of sand. (payment
to be made on measurement of finished quantity)

Brick soling with picked jhama bricks including preparation of bed as

necessary with brick joints properly filled in and packed with powdered
earth and including necessary cushion of similar material below the
6 B-226-1 477.97 Sqm Rs. 339.00 Rs. 162,031.83
soling (and in between layers when more than one layer is used)
completes as per direction.
(a) Single brick flat soling (thickness 75 mm.)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmn
7 B-24-4 nominal size) excluding shuttering and reinforcement,if any, in ground 90.87 Cum Rs. 5,586.58 Rs. 507,652.52
floor as per relevant IS codes. a) Pakur Variety

25mm. thick damp proof course with cement concrete with stone chips
(1:1.5:3) [with graded stone aggregate 10 mm nominal size] and
admixture of water proofing compound as per manufacturer's
specification followed by two coat of polymer based paint, (1st coat after
8 B-47-1 24.72 Sqm Rs. 186.00 Rs. 4,597.92
4 to 5 days of concrete laying and 2 nd coat just before brick masonry
work) as directed (cost of water proofing compound & polymer based
paint to be paid separately). (Chequering not required over concrete or
painted surface).

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 3 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty

Controlled Cement concrete with well graded stone chips (20 mm graded
nominal size) excluding shuttering and reinforcement with complete
design of concrete as per IS : 456 and relevant special publications,
submission of job mix formula after preliminary mix design after testing
of concrete cubes as per direction of Engineer-in charge. Consumption of
cement will not be less than 300 Kg of cement with Super plasticiser per
9 B-24-5
cubic meter of controlled concrete but actual consumption will be
determined on the basis of preliminary test and job mix foumula. In
ground floor and foundation.
[using concrete mixture]
M 20 GradeConcrete Work (Sub Structure)
(i) Pakur Variety

9.1 A. Concrete Work (Sub Structure) 130.50 Cum Rs. 6,299.59 Rs. 822,096.50
9.2 B. Super Structure-GF 107.62 Cum Rs. 6,299.59 Rs. 677,961.88
9.3 Super Structure-1st Floor 107.62 Cum Rs. 6,394.59 Rs. 688,185.78
9.4 Super Structure-2nd Floor 107.62 Cum Rs. 6,489.59 Rs. 698,409.68
9.5 3rd Floor (Mumpty room) 7.91 Cum Rs. 6,584.59 Rs. 52,084.11

Reinforcement for reinforced concrete work in all sorts of structures

including distribution bars, stirrups, binders etc initial straightening and
removal of loose rust (if necessary), cutting to requisite length, hooking
and
10 B-43-40 bending to correct shape, placing in proper position and binding with 16
gauge black annealed wire at every intersection, complete as per drawing
and direction. (a) For works in foundation and upto roof of ground
floor/upto 4 m (i) Tor steel/Mild Steel
I. SAIL/ TATA/RINL

10.1 For ground floor 24.77 MT Rs. 54,915.10 Rs. 1,360,137.20

10.2 For 1st floor 11.83 MT Rs. 55,395.10 Rs. 655,182.11
10.3 For 2nd floor 11.83 MT Rs. 55,875.10 Rs. 660,859.28
10.4 For 3rd floor 0.87 MT Rs. 56,355.10 Rs. 48,990.00

Hire and labour charges for shuttering with centering and necessary
staging upto 4m. using approved stout props and thick hard wood planks
of approved thickness with required bracing for foundation concrete side
11 B-42-36 c shuttering for pilecaps, tie beams, pedestals, columns lintels curved or
straight etc. including fitting and fixing and stripping out after
completion of work (upto roof of ground floor) c) steel shuttering or 9
to12 mm thk approved quality plyboard shuttering in any concrete work.

11.1 Ground floor 2015.03 Sqm Rs. 369.00 Rs. 743,546.07

11.2 Super Structure-1st Floor 1016.51 Sqm Rs. 387.00 Rs. 393,389.37
11.3 Super Structure-2nd Floor 1016.51 Sqm Rs. 405.00 Rs. 411,686.55
11.4 Super Structure - 3rd Floor (Mumpty Room) 75.01 Sqm Rs. 423.00 Rs. 31,729.23
12 B-15-8 Brick work with 1st class bricks in cement mortar (1:6)
12.1 In superstructure, Ground floor 66.64 Cum Rs. 5,636.00 Rs. 375,583.04
12.2 For 1st Floor 66.64 Cum Rs. 5,747.00 Rs. 382,980.08
12.3 For 2nd Floor 66.64 Cum Rs. 5,858.00 Rs. 390,377.12
12.4 For 3rd Floor (Mumpty room) 17.16 Cum Rs. 5,969.00 Rs. 102,428.04

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in
13 B-16-16
ground floor

13.1 Ground floor 573.00 SQM Rs. 736.00 Rs. 421,728.00

13.2 For 1st Floor 573.00 SQM Rs. 748.00 Rs. 428,604.00
13.3 For 2nd Floor 573.00 SQM Rs. 760.00 Rs. 435,480.00
13.4 For 3rd Floor (Mumpty room) 89.65 SQM Rs. 772.00 Rs. 69,209.80

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and raking out
joints including throating, nosing and drip course, scaffolding/staging
14 B-189-1
where necessary (Ground floor).[Excluding cost of chipping over
concrete surface]
a) 20mm thick plaster (External walls) with (1:6) cement mortar.

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 4 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
14.1 In ground floor 497.84 Sqm Rs. 175.00 Rs. 87,122.00
14.2 For 1st Floor 499.16 Sqm Rs. 179.00 Rs. 89,349.64
14.3 For 2nd Floor 499.16 Sqm Rs. 183.00 Rs. 91,346.28
14.4 For 3rd Floor (Mumpty room) 315.69 SQM Rs. 187.00 Rs. 59,034.03

15 B-189-1 c) 15mm thick plaster (Internal walls) with (1:6) cement mortar.

15.1 In ground floor 1233.32 Sqm Rs. 151.00 Rs. 186,231.32

15.2 For 1st Floor 1233.32 Sqm Rs. 155.00 Rs. 191,164.60
15.3 For 2nd Floor 1233.32 Sqm Rs. 159.00 Rs. 196,097.88
16 B-189-1-ii c) 10mm thick plaster (ceiling) with (1:4) cement mortar.
16.1 In ground floor 424.38 Sqm Rs. 133.00 Rs. 56,442.54
16.2 For 1st Floor 424.38 Sqm Rs. 137.00 Rs. 58,140.06
16.3 For 2nd Floor 424.38 Sqm Rs. 141.00 Rs. 59,837.58

Applying Interior grade Acrylic Primer of approved quality and brand on

plastered or cencrete surface old or new surface to receive Distemper/
Acrylic emulsion paint including scraping and preparing the surface
17 B-195-7-b-ii throughly, complete as per manufacturer's specification and as per
direction of the EIC. (a) One Coat i)
Water based interior grade Acrylic Primer (b) Two Coats ii)
Solvent based interior grade Acrylic Primer

17.1 In ground floor 1657.70 sqm Rs. 48.50 Rs. 80,398.45

17.2 For 1st Floor 1657.70 sqm Rs. 49.21 Rs. 81,575.42
17.3 For 2nd Floor 1657.70 sqm Rs. 49.92 Rs. 82,752.38

Applying Acrylic Emulsion Paint of approved make and brand on walls

and ceiling including sand papering in intermediate coats including putty
18
B-201-4-ii (to be done under specific instruction of Superintending Engineer) : (Two
coats) ii) Luxury Quality

18.1 For Ground Floor (Same as Primer Area) 1657.70 Sqm Rs. 70.00 Rs. 116,039.00
18.2 For 1st Floor (Same as Primer Area) 1657.70 Sqm Rs. 70.71 Rs. 117,215.97
18.3 For 2nd Floor (Same as Primer Area) 1657.70 Sqm Rs. 71.42 Rs. 118,392.93

Applying Exterior grade Acrylic primer of approved quality and brand on

plastered or cencrete surface old or new surface toreceive decorative
textured(matt finish) or smooth finish acrylic exterior emulsion paint
19 B-196-8-b
including scraping and preparing the surface throughly, complete as per
manufacturer's specification and as per direction of the EIC . In Ground
Floor: (a) One Coat

19.1 Ground floor 497.84 Sqm Rs. 45.10 Rs. 22,452.58

19.2 For 1st Floor 499.16 Sqm Rs. 45.81 Rs. 22,866.52
19.3 For 2nd Floor 499.16 Sqm Rs. 46.52 Rs. 23,220.92
19.4 For 3rd Floor (Mumpty room) 315.69 Sqm Rs. 47.23 Rs. 14,910.04

Protective and Decorative Textured exterior high class matt finish paint
of approved quality, composed of special Tharmoplastic Resin
containing fine crystalline additives derive from Granite as per
20 B-197-16 manufacturer's specification and as per direction of EIC to be applied
over acrylic primer as required. The rate includes cost of material,
labour, scaffolding and all incidental charges but excluding the cost of
primer.Two Coats.

20.1 Ground floor 497.84 Sqm Rs. 101.00 Rs. 50,281.84

20.2 For 1st Floor 499.16 Sqm Rs. 101.71 Rs. 50,769.56
20.3 For 2nd Floor 499.16 Sqm Rs. 102.42 Rs. 51,123.97
20.4 For 3rd Floor (Mumpty room) 315.69 Sqm Rs. 103.13 Rs. 32,557.11

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 5 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty

Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1)
with stone chips laid in panels as directed with topping made with
ordinary/white cement (as necessary) and marble dust in proportion 2:1
including smooth finishing and rounding off corners and including
21 B-48-6 iii application of cement slurry before flooring works, using cement
@1.75kg./sq.m. all complete including all materials and labour. 3mm thk
topping with ordinary cement.
a) 25mm thick
i) ground floor )

21.1 For ground floor 458.20 Sqm Rs. 269.00 Rs. 123,255.80
21.2 For 1st Floor 458.20 Sqm Rs. 273.00 Rs. 125,088.60
21.3 For 2nd Floor 458.20 Sqm Rs. 277.00 Rs. 126,921.40

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to
match with the existing work & 4 nos. of key stones (10mm) fixed with
araldite at the back of each tile & finishing the joints with white cement
mixed with colouring oxide if required to match the colour of tiles
including roughening of concrete surface, if necessary or by synthetic
22 B-64-35
adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm
thick & 2 mm thick cement slurry at back side of tiles using cement @
2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.
(a) Area of each tile Above 0.09 Sq.m. (i) Coloured decorative

(A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement
slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling
using white cement slurry @ .20kg/Sq.m. (a) Area of each tile upto
0.09 Sq.m
(i) Coloured decorative For G.F

22.1 For ground Floor 35.25 Sqm Rs. 746.00 Rs. 26,296.50
22.2 For 1st Floor 35.25 Sqm Rs. 751.00 Rs. 26,472.75
22.3 For 2nd Floor 35.25 Sqm Rs. 756.00 Rs. 26,649.00
23 (B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement
slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling
using white cement slurry @0.20kg/Sq.m. (a) Area of each tile upto 0.09
Sq.m
(i) Coloured decorative .

23.1 For ground Floor 124.68 Sqm Rs. 749.00 Rs. 93,385.32
23.2 For 1st Floor 124.68 Sqm Rs. 754.00 Rs. 94,008.72
23.3 For 2nd Floor 124.68 Sqm Rs. 759.00 Rs. 94,632.12

Wood work in door and window frame fitted and fixed in position
complete including a protective coat of painting at the contact surface of
24 B-114-1.e the frame exluding cost of bconcrete, Iron Butt Hinges and M.S clamps.
(The quantum should be correted upto three decimals). (d) Sal : Local.

24.1 Ground Floor 5.46 Cum Rs. 77,671.00 Rs. 424,083.66

24.2 Door Frame 1st Floor 5.46 Cum Rs. 77,871.00 Rs. 425,175.66
24.3 Door Frame 2nd Floor 5.46 Cum Rs. 78,071.00 Rs. 426,267.66
24.4 Door Frame 3nd Floor 0.78 Cum Rs. 78,271.00 Rs. 61,051.38

Panel shutters of door and window, as per design (each panel consisting
of single plank without joint), including fitting and fixing the same in
position but
25 B-117-1 excluding the cost of hinge and other fittings.
In ground floor. (iii) 35mm thick shutters with 19mm thick panel of size
30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

25.1 Ground Floor 34.44 Sqm Rs. 2,948.00 Rs. 101,529.12

25.2 Door Shutter 1st Floor 31.92 Sqm Rs. 2,977.00 Rs. 95,025.84

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 6 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
25.3 Door Shutter 2nd Floor 31.92 Sqm Rs. 3,006.00 Rs. 95,951.52
25.4 Door Shutter 3rd Floor 4.20 Sqm Rs. 3,035.00 Rs. 12,747.00

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite

door frame as per approved section with glass fibre reinforced plastic
moulded skins and a special sandwich core, so as to impart monolitaheic
26 B-115-3 composite structure as per approved technology of Department of 118.80 Mtr. Rs. 497.00 Rs. 59,043.60
Science and Technology (DST) to safisfy IS: 4020 door testing
performance criteria.
(i) 66mm x 90mm

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite

door shutters as per approved design with glass fibre reinforced plastic
moulded skins and a special sandwich core, so as to impart monolitaheic
composite structure as per approved technology of Department of
27 B-125-14 37.80 Sqm Rs. 2,581.00 Rs. 97,561.80
Science and Technology (DST) to satisfy IS:4020 door testing
performance criteria.
In ground floor.
(ii) 25 mm thick

Supplying, fitting and fixing M.S. clamps for door and window frame
made of flat bent bar, end bifurcated with necessary screws etc. by
28 B-140-4b cement concrete(1:2:4) as per direction. (Cost of concrete will be paid 192.00 Nos Rs. 25.00 Rs. 4,800.00
separately) ( b)
40mm X 6mm, 200mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws,
29 B-140-5 viii with ISI mark. 100 mm x 75 mm x 288.00 Nos Rs. 66.00 Rs. 19,008.00
3.50 mm
Anodised aluminium floor Door stopper.(Brass) fitted and fixed in
30 B-143-19 i 48.00 Nos Rs. 117.00 Rs. 5,616.00
position with steel screws.
Supplying, fitting and fixing Renewing 125mm long wooden buffer
31 B-150-15 ii block in position with necessary screws etc. complete in all respect. i) 48.00 Nos Rs. 62.00 Rs. 2,976.00
With Sal : Siliguri.

Stainless steel D-type handle of approved quality manufactured from 304

32 B-145-30 vi grade material fitted and fixed. With continuous plate base (Hexagonal / 96.00 Nos Rs. 97.00 Rs. 9,312.00
Round rod). 150 mm grip x 10 mm dia rod.

Anodised aluminium Aldrop / Sliding bolts of approved quality

manufactured from extruded section conforming to I.S. specification (I.S.
33 B-145-28 48.00 Nos Rs. 287.00 Rs. 13,776.00
2681/66) fitted and
fixed complete. (ii) 250mm x 19mm dia. bolt.
Iron skeleton bolt of approved quality fitted and fixed complete.
34 B-141-9 48.00 Nos Rs. 104.00 Rs. 4,992.00
(b) 450mm long x 10mm dia rod
Priming one coat on timber or plastered surface with synthetic oil bound
35 B-200-1-b primer of approved quality including smoothening surfaces by sand 183.46 Sqm Rs. 38.00 Rs. 6,971.48
papering etc.

Painting with best quality synthetic enamel paint of approved make and
brand including smoothening surface by sand papering etc. including
36 B-200-2-a using of approved putty etc. on the surface, if necessary 183.46 Sqm Rs. 81.00 Rs. 14,860.26
a) on timber or plastered surface with super gloss (hi-gloss) Two coats
(with any shade except white)

Supplying profiles of required section made of Aluminium Alloy

Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt finished
conforming to IS: 1868-1983 for fabrication of composit door, sliding &
casement windows, partitions, formed of basic sections of any ISI
37 B-233-1 embossed / certified make and brand as per direction of Engineer - In-
Charge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film.
II) Coloured a) 2- track sliding window

W1(1500x1200)

37.1 Bottom frame 133.80 Mtr. Rs. 218.00 Rs. 29,168.40

37.2 Top & Side frame 379.00 Metr Rs. 195.00 Rs. 73,905.00
37.3 Shutter frame all side 511.00 Metr Rs. 117.00 Rs. 59,787.00

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 7 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
Supplying bubble free float glass of approved make and brand
conforming to IS: 2835-1987.
38 B-243-9 174.33 Sqm Rs. 585.00 Rs. 101,983.05
iv) 5mm thick coloured / tinted / smoke glass.

Supplying PVC rollers for sliding windows as per direction of Engineer

39 B-242-6 384.00 Nos Rs. 14.00 Rs. 5,376.00
in charge.
40 B-242-7 Supplying maruti lock (100mm) 192.00 Nos Rs. 46.00 Rs. 8,832.00
Supplying EPDM gusket of approved make and brand as per direction of
Engineer in charge.
41 B-242-8 511.00 Metr Rs. 15.00 Rs. 7,665.00
i) For sliding windows
b) 'U' shaped EPDM gasket for frames.

Labour charge for fabrication and installation of composite door,

window, partitions made from annodized extruded alloy aluminium
sections for the following units:-
A) Glazed aluminium sliding windows made of extruded and
annodized alloy aluminium sectios, fabrications, including cutting to
proper shape and size, drilling and aligning of window shutter frame
fitted with in built locking arrangements, sliding rollers and other
necessary fittings, fixture, adhesives and joineries along with extruded
neoprine or EPDM gasketing in between window frame and masonry
42 B-239-2 174.33 Sqm Rs. 696.00 Rs. 121,333.68
work (walls, column, beam.lintels etc.) as well as between glass and
shutter frame for fixing glass and Polysulphide sealant and in between
shutter and window frame where necessary including cutting to requisite
size and fixing glass as per drawing, specification and direction of EIC.
The rate includes the hire charge of all tools and plants, including all
incidental charges, adhesive, joineries such as screw, cleat angle etc. but
excluding the cost of extruded aluminium sections, glass, neoprene /
EPDM gasket, locking arrangement and rollers.
i ) 2 track sliding window.

M.S. or W.I. Ornamental grill of approved design, joints continuously

welded with M.S. or W.I. Flats and bars for windows, railing etc. fitted
43 B-104-13-ii
and fixed with necessary screws and lugs in ground floor. a)Grill
weighing upto 16 Kg./sq.mtr and above.

43.1 For Ground Floor 10.69 Qntl. Rs. 9,888.00 Rs. 105,667.12
43.2 For 1st Floor 11.33 Qntl. Rs. 9,986.88 Rs. 113,195.29
43.3 For 2nd Floor 11.33 Qntl. Rs. 10,085.76 Rs. 114,316.04
43.4 For 3rd Floor (Mumpty room) 0.29 Qntl. Rs. 10,184.64 Rs. 2,933.18
Priming one coat on timber or plastered surface with synthetic oil bound
44 B-200-1-b primer of approved quality including smoothening surfaces by sand 183.46 Sqm Rs. 38.00 Rs. 6,971.48
papering etc.

Painting with best quality synthetic enamel paint of approved make and
brand including smoothening surface by sand papering etc. including
45 B-200-2-a using of approved putty etc. on the surface, if necessary 183.46 Sqm Rs. 81.00 Rs. 14,860.26
a) on timber or plastered surface with super gloss (hi-gloss) Two coats
(with any shade except white)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor
46 B-192-15 etc. 130.78 Sqm Rs. 34.00 Rs. 4,446.52
NOTE:Cement 0.152 cu.m per100 sq.m.

80 mm thick interlocking designer concrete paver block M-40 grade for

medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-
2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM
base course & 250 mm thk bound gnaular/ granular sub-base course &
filling the interstices of blocks with fine sand by brooming & subsequent
47 B-286-8 268.06 Sqm Rs. 1,756.00 Rs. 470,713.36
watering including cost of sand for sand bed but excluding cost of base,
sub-base course & subgrade preparation.) complete as per direction of
Engineer-in-Charge.
[Note: Subgrade CBR shouldnot be less than 5]
Colour Decorative

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 8 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
Supplying and laying chequered tiles of any shade & of approved quality
with (1:1½:3) cement concrete laid in panels or patterns as directed in
pavement, footpath etc. including necessary underlay 25 mm thick [avg]
cement mortar (1:3) complete in all respect with all labour and materials.
48 B-74-46 16.02 Sqm Rs. 471.00 Rs. 7,545.42
[Using cement slurry @ 4.4 kg/Sq.m at back side and @2.4 kg/Sq.m for
joint filling]
Red Variety
(i) 25 mm. thick

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia
and 900mm height vertical balustrade at every two alternative steps,
50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe
49 B-109-22 and base/cover plate with Strainless Steel GRADE 304 containing 7.5% 53.32 Mtr. Rs. 5,974.00 Rs. 318,533.68
nickle (Interior Grade) Brushed/Mat
finish, complete as per direction of the Engineer-in-charge. Weight of
Strainless Steel railing per metre 6.5 Kg (approx)

Supplying & laying 3mm thick pre-fabricated plastomeric water proofing

membrane conforming to EN 12311-1 & ASTMD 5147, manufactured
with atactic poly propylene (APP) modified premium grade asphalt ,
specially reinforced with non-woven polyester core with polyester
reinforcement @160 gms per sqm & both faces covered with thermo-
fusible polyethylene film /MineraL on top face over a coat of primer @
0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface
prepared wherever required. Lap joint shall be provided of 75 mm in
50 B-92-4 longitudinal & 100 mm in transverse direction and fused using LPG/ 477.97 Sqm Rs. 407.00 Rs. 194,533.79
Propane torch employing extra care ensuring full bondage, complete
removal of entrapped air and sealing edges into grooves in appropriate
manner as per direction of Engineer -in-charge all complete including
materials,labour and applicable taxes. (Payment shall be made on the
basis of finished surface area.). Membrane Property: Softening Point >
150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600
(longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal),
200 (transverse)

TOTAL Rs. 18,070,562.79

Supplying, fitting and fixing PVC pipes of approved make of schedule -

80 (medium duty) confirm to ASTMD - 1785 and threaded to match with
GI pipe as per IS: 1239 (Part-I) with all necessary accessories, specials
viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing
socket, reducing tee, short piece etc. fitted with holder bats clamps,
[i/no.19I, Sec
51 including cutting pipes, making threads, fitting, fixing etc. complete in 0 0 0 0
A-A(II)] P-12
all respect including cost of all necessary fittings as required,jointing
materials and two coats of painting with approved paint in any position
above ground. (Payment will be made on the centre line measurements of
total pipe line including all specials. No separate payment will be made
for accesories, specials. Payment for painting will be made seperately)

0 0 (A) For Exposed Work PVC PIPES 0 0 0 0

51.1 0 15 mm 160 Mtr. Rs. 101.00 Rs. 16,160.00
51.2 0 20 mm 50 Mtr. Rs. 129.00 Rs. 6,450.00
51.3 0 25 mm 40 Mtr. Rs. 177.00 Rs. 7,080.00
51.4 0 50 mm 22 Mtr. Rs. 384.00 Rs. 8,448.00
51.5 0 80 mm 40 Mtr. Rs. 768.00 Rs. 30,720.00
51.6 0 100 mm 317 Mtr. Rs. 1,134.00 Rs. 359,478.00
51.7 0 150 mm 30 Mtr. Rs. 1,824.00 Rs. 54,720.00
0 0 (B) For Concealed Work PVC PIPES 0 0
51.8 0 15 mm 180 Mtr. Rs. 137.00 Rs. 24,660.00
51.9 0 20 mm 96 Mtr. Rs. 158.00 Rs. 15,168.00

[i/no.5, Sec A- Supplying, fitting and fixing gunmetal wheel valve of approved brand
52 0 0
A(II)] and make tested to 21 kg per sq. cm. (for water lines only).

52.1 0 (iv) 50 mm dia 4 Each Rs. 2,277.00 Rs. 9,108.00

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 9 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
52.2 0 (vii) 25 mm dia 12 Each Rs. 778.00 Rs. 9,336.00
52.3 0 (viii) 20 mm dia 24 Each Rs. 604.00 Rs. 14,496.00

Section-B,
Sanitary
53 Drainage (B)- (B) Fittings 0 0
(II), Item no.
23-(B)

0 0 xi) Door Bend (T.S.) 0 0

53.1 0 (b) 110 mm 35 Each Rs. 147.00 Rs. 5,145.00
0 0 xv) Vent Cowl 0 0
53.2 0 (a) 75 mm 2 Each Rs. 25.00 Rs. 50.00
53.3 0 (b) 110 mm 2 Each Rs. 33.00 Rs. 66.00
53.4 0 xxi) 110 x 110 "P" Trap 12 Each Rs. 281.00 Rs. 3,372.00
Supplying, fitting and fixing CI holder bad clamp including cutting holes
[i/no.14, Sec A- in wall ect. and mending good all damages in cement concrete with
54 0 0
A(II)] P-10 jhama chips (4:2:1) and cement plaster (6:1) to match and curing
complete in all respect.
54.1 0 (i) 15 mm dia 340 Each Rs. 25.00 Rs. 8,500.00
54.2 0 (ii) 20 mm dia 146 Each Rs. 29.00 Rs. 4,234.00
54.3 0 (iii) 25 mm dia 40 Each Rs. 31.00 Rs. 1,240.00
54.4 0 (ix) 100 mm dia 159 Each Rs. 166.00 Rs. 26,394.00

Supplying, fitting and fixing PVC pipes for underground work of

approved make of schedule -80 (medium duty) confirm to ASTMD -
1785 and threaded to match with GI pipe as per IS: 1239 (Part-I) with all
necessary accessories, specials viz. socket, bend, tee, union, cross, elbo,
nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted
[i/no.19II, Sec with holder bats clamps, including cutting pipes, making threads, fitting,
55 0 0
A-A(II)] P-13 fixing etc. fitted including cost of materials, jointing materials, cutting
pipes, making threads, cutting trench up to 1.5 metre below surface of all
sort of soil and refilling the same as directed complete in all respect.
(Payment will be made on the centre line measurements of total pipe line
including all specials. No separate payment will be made for accesories,
specials. Payment for painting will be made seperately)

0 0 80 mm 45 Mtr. Rs. 795.00 Rs. 35,775.00

Supplying, fitting and fixing white vitreous china best quality approved
make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,
C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar
[i/no.-2(i) , cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved
56 0 0
Section A-(V)] quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long
approved quality P.V.C. connection pipe with heavy brass C.P. nut
including mending good all damages and painting the brackets with two
coats of approved paint.

(iii) 630 mm X 450 mm size

0 0 6 Each Rs. 3,260.00 Rs. 19,560.00
2 Nos for Each Floor
Supplying, fitting and fixing pedestal of approved make for wash basin
57 S-41-3 0 0
(white)
0 0 2 Nos for Each Floor 6 Each Rs. 1,497.00 Rs. 8,982.00
Supplying, fitting and fixing stainless steel sink complete with waste
58 S-42-6 0 0
fittings and two coats of painting of C.I. brackets.
0 0 (ii) 630 mm X 550 mm X 180 mm 1 Each Rs. 3,788.00 Rs. 3,788.00
[item/no.19/g,
CP Sink Cock with regular swinging spout (table mounted model)
59 i) Section A- 1 Each Rs. 1,022.00 Rs. 1,022.00
(Equivalent to code no. 5357 of Jaquar or similar brand)
(v)]

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware

60 S-79-2 0 0
of approved make complete in position with necessary bolts, nuts etc

0 0 (a) With 'P' trap 12 Each Rs. 1,421.00 Rs. 17,052.00

[i/no.10) A, II), Supplying, fitting and fixing Closet seat of approved make with lid and
61 0 0
Sec B-(III)] C.P. hinges, rubber buffer and brass screws complete.

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 10 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty
0 0 (a) E.W.C. (i) Plastic (hallow type) WHITE 12 Each Rs. 380.00 Rs. 4,560.00

[i/no.11) i), Sec Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make
62 0 0
B-(III)] with necessary fixing materials and clamps complete.

0 0 i) Polythene Flush Pipe 12 Each Rs. 155.00 Rs. 1,860.00

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern

[i/no.2, Sec A-
63 conforming to I.S. specification with P.V.C. fittings complete,C.I. 12 Each Rs. 1,015.00 Rs. 12,180.00
(IV)]
brackets including two coats of painting to bracket etc.

Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall

[It no.3/f, Sec
64 Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or 12 Each Rs. 1,251.00 Rs. 15,012.00
A-(II)]
similar).

[i/no.-6 (i) , Supplying, fitting and fixing Flat back urinal (half stall urinal) in white
65 Section B, B- vitreous chinaware of approved make in position with brass screws on 75 0 0
(III)] mm X 75 mm X 75 mm wooden blocks complete.

0 0 (i) 635 mm X 395 mm X 420 mm 12 Each Rs. 2,869.00 Rs. 34,428.00

[i/no.14, Sec B- Supplying, fitting and fixing porcelain partition wall of approved make
66 12 Each Rs. 1,132.00 Rs. 13,584.00
(III)] of size 618 mm X 310 mm complete in all respect.

[item/no.7,a, (ii) Chromium plated Bib Cock long body with wall flange with aerator
67 ii), Section A- (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of 12 Each Rs. 659.00 Rs. 7,908.00
(II)] P-6 ESSCO or similar brand)

[i/no.7/d/i, Sec i) Chromium plated Angular Stop Cock with wall flange (Equivalent to
68 43 Each Rs. 815.00 Rs. 35,045.00
A-(II)] Code No. 5053 & Model - Florentine of Jaquar or similar brand).

ii) Chromium plated Concealed Stop Cock (Equivalent to Code No.

Item/no.7,b, ii),
69 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar 12 Each Rs. 674.00 Rs. 8,088.00
P-6
brand).

Supplying, fitting and fixing shower of approved brand and make.

(a) (i) Chromium plated round shower with revolving joint 100 mm dia
70 S-3-3 12 Each Rs. 452.00 Rs. 5,424.00
with rubid cleaning system (Equivalent to Code No. 542(N) & Model
Tropical / Sumthing Special of ESSCO or similar brand).

Supplying, fitting and fixing shower of approved brand and make.

(a) (iii) Chromium plated shower arm 240 mm long (Equivalent to Code
71 S-4-3 12 Each Rs. 309.00 Rs. 3,708.00
No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or similar
brand).

[i/no.-20, Sec
72 Supplying, fitting and fixing C.P. Extension Pipe 12 Each Rs. 106.00 Rs. 1,272.00
A-(V)] P-46

[i/no.-9(iii) , Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white

73 0
Section A-(V)] flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.

0 0 i) 600mm long 31 Each Rs. 107.00 Rs. 3,317.00

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste

74 S-43-10 0
pipe, with PVC coupling at one end fitted with necessary clamps.

0 0 (iv) 1050 mm long 19 Each Rs. 91.00 Rs. 1,729.00

Section-B,
Sanitary
Drainage (B)-
75 Supplying, fitting and fixing C.I. square jalli.
(II), Item no.
19, i), ii) &
iii)P-67

0 0 (i) 100 mm 43 Each Rs. 73.00 Rs. 3,139.00

[i/no.17, Sec B- Supplying, fitting and fixing liquid soap container.
76 18 Each Rs. 393.00 Rs. 7,074.00
(III)] (a) Cromium plated.
Supplying, fitting and fixing towel rail with two brackets.
77 S-82-22 (a) C.P. over brass 12 Each Rs. 430.00 Rs. 5,160.00
(ii) 25 mm dia. and 600 mm long
Supplying, fitting and fixing porcelain soap tray of approved make.
78 S-83-24 12 Each Rs. 338.00 Rs. 4,056.00
(i) Recessed soap tray of size 150 mm X 150 mm

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 11 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty

[i/no.15, Sec B- Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver
79 0 0
(III)] red as per I.S. 3438 / 1965 together with brass C.P. hinges.

0 0 (i) 600 mm X 450 mm 6 Each Rs. 484.00 Rs. 2,904.00

[It no.3/e, Sec Chromium plated double coat Hook(Equivalent to Code No. 35761 &
80 36 Each Rs. 516.00 Rs. 18,576.00
A-(II)] Model - KUBIX of Jaquar or similar).

Constructing Inspection pit of inside measurement 600mm X 600mm X

upto 600mm (depth) with 250 mm thick 1st. class brick work in cement
mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick
cement concrete (1:3:6) with stone chips over a layer of jhama brick flat
soling,15 mm thick (1:4) cement plaster to inside walls and out-side
walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,
providing necessary invert with cement concrete (1:3:6) with stone chips
as per direction, neat cement finishing to entire internal surfaces, top of
81 S-87-1 0 0
the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips
and necessary reinforcements upto 1% and shuttering including 6 mm
thick cement plaster (1:4) in all external surfaces of the slab and one 560
mm dia. R.C.C. manhole cover of approved make supplied, fitted and
fixed in the slab with necessary fittings, necessary earthwork in
excavation in all sorts of soil, filling sides of the pit with earth and
removing spoils after work complete in all respect with all costs of
labour and materials.

0 0 ii) With PAKUR Varitey 10 Each Rs. 7,253.00 Rs. 72,530.00

iii) Extra for each additional depth of 150 mm or part thereof beyond
0 0 10 Each Rs. 1,515.00 Rs. 15,150.00
initial 600 mm depth.

Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm

thick 1st class brick work (1:4) in all sides over a layer of jhama brick
soling and 150 mm thick cement concrete with stone chips (1:3:6)
including necessary earth work, fitting and fixing approved type S.W.
master trap, constructing masonry invert with cement concrete (1:1.5:3)
with stone chips, plastering inside and outside (outside upto 300 mm
below G.L.) with 20 mm thick cement plastering (1:4) and neat cement
punning, including supplying,fitting and fixing one 560 mm. dia R.C.C.
82 S-87-2 0 0
manhole cover of approved make with R.C.C. slab of 100 mm thick with
cement concrete (1:1.5:3) with stone chips including necessary
reinforcement (upto 1%) and shuttering and necessary corbelling
brickwork (1:4) so that the R.C.C. cover slab rests 150 mm above
adjacent G.L., cement plaster (1:4) 10 mm thick on all external surfaces
of the top slab as directed complete in all respect and removal of surplus
earth with all costs of labour and materials. (Excluding the cost of Master
trap only)

(i) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W.
0 0 master trap of 150 mm dia. of approved make A) With Pakur variety. 4 Each Rs. 11,959.00 Rs. 47,836.00
(SAIL/TATA/RINL)

Construction of septic tank of different capacities as per approved

drawing with 1st class brick work in cement mortar (1:4) including two
560 mm dia. R.C.C. manhole cover(heavy type)of approved make
supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab
83 S-88-3 0 0
with necessary fittings, 20mm thick cement plaster (4 : 1)with neat
cement finish to the internal surfaces and 15 mm thick cement plaster (4 :
1)to outside wall upto 200 mm below G.L floor finished with 25 mm
thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 12 of 33

 QUANTITY SURVEY SESSIONAL

BILL OF QUANTITY
Sl. Referance Cum.
Description of Item Unit Rate Amount
No. Page-Item Qty

slab including supplying, fitting and fixing all necessry specials, fittings,
S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil,
shoring, bailing out and pumping out water as necessary, ramming,
dressing the bed and fefilling the sides of the tanks with earth, removing
spoils, filling up the chamber with clear water, removing foreign
0 0 0 0
materials from the chamber and including constructing attached
inspection pit as per approved drawing and connecting all necessary
pipes, joints etc. with internal plaster work and artificial stone flooring is
to be done with admixture of water proofing compound @ 0.5% by
weight of cement with all costs of labour and materials.

Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground
0 0 0 0
Level.

(ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be

0 0 follwed as per IS:2470,PartI.Payment will be made separetly on the basis 0 0
of actual height based on relevant I.S.Code.

(v) For 100 users

0 0 1 Each Rs. 114,663.00 Rs. 114,663.00
A) With Pakur variety. (SAIL/TATA/RINL)

Construction of circular soak well 2.5 metre deep in all types of sandy
soils with dry brick work upto 1.6 metre from the bottom having 150 mm
intermediate cement brick work (1:4)band all round and cement brick
work (1:4)upto 0.90 metre from top with 20mm thick cement plastering
(1:4)to inside face upto the depth of cement brick work, 15mm thick
cement plaster (1:4)on outer face from top of the well upto G.L. and 6
mm thick cement plaster (1:4)on top of the R.C.C. cover slab including
filling bottom 1.00 metre of inside of the well with brick metal (50 mm
to 63 mm size)including R.C.C. cover slab of 100 mm thick with cement
84 S-89-4 2 Each Rs. 16,577.00 Rs. 33,154.00
conc (1:1.5:3)with stone chips with necessary reinforcement and
shuttering including one 560 mm dia. R.C.C. manhole cover (heavy
type)of approved make supplied, fitted and fixed in the cover slab with
necessary fittings, making nacessary arrangements for pipe connections,
excavation of well including shoring, dewatering and removing the exess
earth from the premises as per direction complete in all respect with all
costs of labour and materials. With 250 mm thick dry brick work and 250
mm thick cement brick work (1:6)and 1.00m inside dia.
(SAIL/TATA/RINL)

Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of

85 S-91-7 approved make with rim of approved make (Heavy type) 2 Each Rs. 338.00 Rs. 676.00
(ii) 560 mm dia.
Rs. 1,164,037.00

Prepared by Shyam Sundar Bhattacharyya (001810403031) Page 13 of 33

 QUANTITY SURVEY SESSIONAL

JADAVPUR UNIVERSITY
NAME :- SHYAM SUNDAR BHATTACHARYYA; ROLL- 001810403021 ; CLASS :- 3rd YEAR 2nd SEM;
SUBJECT:-QUANTITY SURVEY SESSIONAL
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Surface Dressing of the ground in any kind of soil including removing
vegetation inequalities not exceeding 15 cm depth and disposal of the
1 B-2,a-1 rubbish within a lead upto 75 m as directed.

Total Area of Land 1 46.00 24.500 1127.00

0.5 46.00 7.000 161.00 1288.00 Sqm
Pre-Constructional Anti-termite measures:
(d) Treatment to the back filling of R.C.C. foundation with chemical
emulsion by admixing chloropyrofos emulsifiable concentrate (1%
concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of
the vertical surface of the substructure of each side of the foundation.
2 B-5-10 The work shall be carried out as per specification as described in para
6.3.1 of code IS6313 (part-II) 1981 (Mode of measurement will be per
sq.m. of vertical area of foundation treated).

Vertical surface of each side of the foundation 62 10.40 1.500 967.20 967.20 Sqm
Earth work in excavation of foundation trenches or drains, in all sorts
of soils (including mixed soil but excluding laterite or sandstone)
including removing, spreading or stacking the spoils within a lead of 75
m.as directed. The item includes necessary trimming the sides of
3 B-2,a-1 trenches. Leveling, dressing and ramming the bottom, bailing out water
etc. as required complete

3.1 a) Depth of excavation not exceeding 1.5m.

Column Foundation 62 2.6 2.6 1.5 628.68
Tie Beam
Grid 1, 2, 3, 4. 4 36 0.4 0.55 31.68

Deduction for Col. -9 0.25 0.4 0.55 -0.50

Grid 5, 6, 7. 6 6.25 0.4 0.55 8.25
Deduction for Col. -2 0.25 0.4 0.55 -0.11
Grid 5. 1 11.25 0.4 0.55 2.48
Deduction for Col. -3 0.25 0.4 0.55 -0.17
Grid A, B, K, L. 4 18.125 0.4 0.55 15.95
Deduction for Col. -6 0.25 0.4 0.55 -0.33
Grid C, J. 2 12.75 0.4 0.55 5.61
Deduction for Col. -4 0.25 0.4 0.55 -0.22
Grid D, I. 2 8.5 0.4 0.55 3.74
Deduction for Col. -3 0.25 0.4 0.55 -0.17
Grid E, F, G, H. 4 11.625 0.4 0.55 10.23
Deduction for Col. -4 0.25 0.4 0.55 -0.22
SB 1 4 2 0.4 0.55 1.76
SB 2 2 2.875 0.4 0.55 1.27 707.93 Cum
3.2 b) Depth of excavation from 1.5m to 2m
Column Foundation 62 2.6 2.6 0.5 209.56 209.56 Cum
Earth work in filling in foundation trenches or plinth with good earth,
in layers not exceeding 150 mm. Including watering and ramming etc.
4 B-3,a-1 layer by layer complete.
a) With earth obtained from excavation of foundation.

1/5th of excavation 1/5 (707.93+209.56) = 183.50 183.50 Cum

Filling in foundation or plinth by silver sand in layers not exceeding
150 mm as directed and consolidating the same by thorough saturation
with water, ramming complete including the cost of supply of sand.
5 B-4,a-2
(payment to be made on measurement of finished quantity)

Footing 62 2.6 2.6 2 838.24

Deduction for Item No - 4 -183.50
Inbetween GF & GL 1 40 20 0.7 560.00 1214.74 Cum

SHYAM SUNDAR BHATTACHARYYA Page 14 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Brick soling with picked jhama bricks including preparation of bed as
necessary with brick joints properly filled in and packed with powdered
earth and including necessary cushion of similar material below the
soling (and in between layers when more than one layer is used)
6 B-226-1 completes as per direction.
(a) Single brick flat soling (thickness 75 mm.)

BELOW FLOOR 1 36.25 8.75 317.19

2 9.625 6.5 125.13
1 11.5 3.1 35.65 477.97 Sqm
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20
B-24-4 mmn nominal size) excluding shuttering and reinforcement,if any, in
7 ground floor as per relevant IS codes. a) Pakur Variety

Footing 62 2.15 2.15 0.1 28.66

Grid 1, 2, 3, 4. 4 36 0.4 0.1 5.76
Deduction for Col. -9 0.25 0.4 0.1 -0.09
Grid 5, 6, 7. 6 6.25 0.4 0.1 1.50
Deduction for Col. -2 0.25 0.4 0.1 -0.02
Grid 5. 1 11.25 0.4 0.1 0.45
Deduction for Col. -3 0.25 0.4 0.1 -0.03
Grid A, B, K, L. 4 18.125 0.4 0.1 2.90
Deduction for Col. -6 0.25 0.4 0.1 -0.06
Grid C, J. 2 12.75 0.4 0.1 1.02
Deduction for Col. -4 0.25 0.4 0.1 -0.04
Grid D, I. 2 8.5 0.4 0.1 0.68
Deduction for Col. -3 0.25 0.4 0.1 -0.03
Grid E, F, G, H. 4 11.625 0.4 0.1 1.86
Deduction for Col. -4 0.25 0.4 0.1 -0.04
SB 1 4 2 0.4 0.1 0.32
SB 2 2 2.875 0.4 0.1 0.23
BELOW FLOOR 1 36.25 8.75 0.1 31.72
2 9.625 6.5 0.1 12.51
1 11.5 3.1 0.1 3.57 90.87 Cum
25mm. thick damp proof course with cement concrete with stone chips
(1:1.5:3) [with graded stone aggregate 10 mm nominal size] and
admixture of water proofing compound as per manufacturer's
specification followed by two coat of polymer based paint, (1st coat
after 4 to 5 days of concrete laying and 2 nd coat just before brick
8 B-47-1 masonry work) as directed (cost of water proofing compound &
polymer based paint to be paid separately). (Chequering not required
over concrete or painted surface).

GRID - 1 1 33.75 0.2 6.75

GRID - A 2 16.625 0.2 6.65
GRID - 7 2 5.75 0.2 2.30
GRID - C 2 8.875 0.2 3.55
GRID - 4 2 5.575 0.2 2.23
GRID - E 2 2.85 0.2 1.14
GRID - 5 1 10.5 0.2 2.10 24.72 Sqm
Controlled Cement concrete with well graded stone chips (20 mm
graded nominal size) excluding shuttering and reinforcement with
complete design of concrete as per IS : 456 and relevant special
publications, submission of job mix formula after preliminary mix
design after testing of concrete cubes as per direction of Engineer-in
charge. Consumption of cement will not be less than 300 Kg of cement
with Super plasticiser per cubic meter of controlled concrete but actual
consumption will be determined on the basis of preliminary test and job
9 B-24-5 mix foumula. In ground floor and foundation.
[using concrete mixture]
M 20 GradeConcrete Work (Sub Structure)
(i) Pakur Variety

9.1 A. Concrete Work (Sub Structure)

SHYAM SUNDAR BHATTACHARYYA Page 15 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Column Footing 62 2 2 0.2 49.60
Pedestral 62 0.65 0.65 0.2 5.24
Column upto P.L 62 0.25 0.25 2.1 8.14
TIE BEAM
Grid 1, 2, 3, 4. 4 36 0.25 0.35 12.60

Deduction for Col. -9 0.25 0.25 0.35 -0.20

Grid 5, 6, 7. 6 6.25 0.25 0.35 3.28
Deduction for Col. -2 0.25 0.25 0.35 -0.04
Grid 5. 1 11.25 0.25 0.35 0.98
Deduction for Col. -3 0.25 0.25 0.35 -0.07
Grid A, B, K, L. 4 18.125 0.25 0.35 6.34
Deduction for Col. -6 0.25 0.25 0.35 -0.13
Grid C, J. 2 12.75 0.25 0.35 2.23
Deduction for Col. -4 0.25 0.25 0.35 -0.09
Grid D, I. 2 8.5 0.25 0.35 1.49
Deduction for Col. -3 0.25 0.25 0.35 -0.07
Grid E, F, G, H. 4 11.625 0.25 0.35 4.07
Deduction for Col. -4 0.25 0.25 0.35 -0.09
SB 1 4 2 0.25 0.35 0.70
SB 2 2 2.875 0.25 0.35 0.50
PLINTH BEAM
Grid 1, 2, 3, 4. 4 36 0.25 0.4 14.40

Deduction for Col. -9 0.25 0.25 0.4 -0.23

Grid 5, 6, 7. 6 6.25 0.25 0.4 3.75
Deduction for Col. -2 0.25 0.25 0.4 -0.05
Grid 5. 1 11.25 0.25 0.4 1.13
Deduction for Col. -3 0.25 0.25 0.4 -0.08
Grid A, B, K, L. 4 18.125 0.25 0.4 7.25
Deduction for Col. -6 0.25 0.25 0.4 -0.15
Grid C, J. 2 12.75 0.25 0.4 2.55
Deduction for Col. -4 0.25 0.25 0.4 -0.10
Grid D, I. 2 8.5 0.25 0.4 1.70
Deduction for Col. -3 0.25 0.25 0.4 -0.08
Grid E, F, G, H. 4 11.625 0.25 0.4 4.65
Deduction for Col. -4 0.25 0.25 0.4 -0.10
SB 1 4 2 0.25 0.4 0.80
SB 2 2 2.875 0.25 0.4 0.58 130.50 Cum
9.2 B. Super Structure-GF
COLUMN 62 0.25 0.25 3.2 12.40
LINTEL
W1 26 1.8 0.25 0.15 1.76

W2 4 0.9 0.25 0.15 0.14

D1 16 1.8 0.25 0.15 1.08
D2 8 1.05 0.25 0.15 0.32
D 4 2.75 0.25 0.15 0.41
Chajja
W1 26 1.8 0.45 0.088 1.85

W2 4 1.2 0.45 0.088 0.19

FLOOR SLAB 1 36.25 8.75 0.125 39.65
Do 2 9.625 6.5 0.125 15.64
Do 1 11.5 3.1 0.125 4.46
ROOF BEAM
Grid 1, 2, 3, 4. 4 36 0.25 0.325 11.70

Deduction for Col. -9 0.25 0.25 0.325 -0.18

Grid 5, 6, 7. 6 6.25 0.25 0.325 3.05
Deduction for Col. -2 0.25 0.25 0.325 -0.04
Grid 5. 1 11.25 0.25 0.325 0.91
Deduction for Col. -3 0.25 0.25 0.325 -0.06
Grid A, B, K, L. 4 18.125 0.25 0.275 4.98
Deduction for Col. -6 0.25 0.25 0.275 -0.10
Grid C, J. 2 12.75 0.25 0.275 1.75
Deduction for Col. -4 0.25 0.25 0.275 -0.07
Grid D, I. 2 8.5 0.25 0.275 1.17
Deduction for Col. -3 0.25 0.25 0.275 -0.05
Grid E, F, G, H. 4 11.625 0.25 0.275 3.20
SHYAM SUNDAR BHATTACHARYYA Page 16 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Deduction for Col. -4 0.25 0.25 0.275 -0.07
SB 1 4 2 0.25 0.275 0.55
SB 2 2 2.875 0.25 0.275 0.40
STAIR
Weist Slab 2 1.5 4 0.125 1.50

Half Landing 1 1.2 3.125 0.125 0.47

Steps 9 1.5 0.3 0.15 0.61 107.62 Cum
9.3 Super Structure-1st Floor
Qty. same as Super Structure-GF 107.62 107.62 Cum
9.4 Super Structure-2nd Floor
Qty. same as Super Structure-GF 107.62 107.62 Cum
9.5 3rd Floor (Mumpty room)
Slab for stair 2 3.625 6.65 0.125 6.03
Column 12 0.25 0.25 2.5 1.88 7.91 Cum
Reinforcement for reinforced concrete work in all sorts of structures
including distribution bars, stirrups, binders etc initial straightening and
removal of loose rust (if necessary), cutting to requisite length, hooking
and bending to correct shape, placing in proper position and binding
with 16 gauge black annealed wire at every intersection, complete as
B-43-40 per drawing and direction.
10 (a) For works in foundation and upto roof of ground floor/upto 4 m (i)
Tor steel/Mild Steel
I. SAIL/ TATA/RINL

10.1 A. Ground Floor

For Sub-Structure + Ground Floor As per BBS 24.77 24.768 MT

10.2 For 1st floor As per BBS 11.83 11.83 MT
10.3 For 2nd floor As per BBS 11.83 11.83 MT
10.4 For 3rd floor As per BBS 0.87 0.87 MT
Hire and labour charges for shuttering with centering and necessary
staging upto 4m. using approved stout props and thick hard wood
planks of approved thickness with required bracing for foundation
concrete side shuttering for pilecaps, tie beams, pedestals, columns
lintels curved or straight etc. including fitting and fixing and stripping
11 B-42-36 c out after completion of work (upto roof of ground floor) c) steel
shuttering or 9 to12 mm thk approved quality plyboard shuttering in
any concrete work.

11.1 i) Ground floor

Column Footing
PCC 62 8.6 0.1 53.32

Footing 62 8 0.2 99.20

Pedestral 62 2.6 0.2 32.24
Column upto Plinth 62 1 2.1 130.20
TIE BEAMGrid 1, 2, 3, 4. 4 33.75 0.95 128.25
Grid 5, 6, 7. 6 5.75 0.95 32.78
Grid 5. 1 10.5 0.95 9.98
Grid A, B, K, L. 4 16.625 0.95 63.18
Grid C, J. 2 11.75 0.95 22.33
Grid D, I. 2 7.75 0.95 14.73
Grid E, F, G, H. 4 10.625 0.95 40.38
SB 1 4 2 0.95 7.60
SB 2 2 2.875 0.95 5.46
PLINTH BEAMGrid 1, 2, 3, 4. 4 33.75 1.05 141.75
Grid 5, 6, 7. 6 5.75 1.05 36.23
Grid 5. 1 10.5 1.05 11.03
Grid A, B, K, L. 4 16.625 1.05 69.83
Grid C, J. 2 11.75 1.05 24.68
Grid D, I. 2 7.75 1.05 16.28
Grid E, F, G, H. 4 10.625 1.05 44.63
SB 1 4 2 1.05 8.40
SB 2 2 2.875 1.05 6.04
MKD-A = 998.52
B. Super Structure-GF
SHYAM SUNDAR BHATTACHARYYA Page 17 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Column PB to GF Roof 62 1 3.2 198.40
LINTELW1 26 1.8 0.55 25.74
W2 4 0.9 0.55 1.98
D1 16 1.8 0.55 15.84
D2 8 1.05 0.55 4.62
D 4 2.75 0.55 6.05
ChajjaW1 26 1.8 0.525 24.57
W2 4 1.2 0.525 2.52
FLOOR SLAB 1 36.25 8.75 317.19
Do 2 9.625 6.5 125.13
Do 1 11.5 3.1 35.65
Sides of Slab 1 109.25 0.125 13.66
Do 2 9.625 0.125 2.41
Do 2 3.1 0.125 0.78
ROOF BEAM
Grid 1, 2, 3, 4. 4 33.75 0.65 87.75

Grid 5, 6, 7. 6 5.75 0.65 22.43

Grid 5. 1 10.5 0.65 6.83
Grid A, B, K, L. 4 16.625 0.65 43.23
Grid C, J. 2 11.75 0.65 15.28
Grid D, I. 2 7.75 0.65 10.08
Grid E, F, G, H. 4 10.625 0.65 27.63
SB 1 4 2 0.65 5.20
SB 2 2 2.875 0.65 3.74
STAIRWeist Slab 2 1.5 4 12.00
Half Landing 1 1.2 3.125 3.75
Steps 18 1.5 0.15 4.05
MKD-B = 1016.51
Total (MKD-A + MKD-B) = 2015.03 Sqm
11.2 C. Super Structure-1st Floor
Qty. same as Super Structure-GF (MKD - B) 1016.51 1016.51 Sqm
11.3 D. Super Structure-2nd Floor
Qty. same as Super Structure-GF (MKD - B) 1016.51 1016.51 Sqm
E. Mumpty Room
11.4 Slab Bottom
Column 12 1 2.05 24.60
Side Beam 4 6.125 0.65 15.93
do 4 3.125 0.65 8.13
Slab Bottom 1 6.565 3.625 23.80
Side 1 20.38 0.125 2.55 75.01 Sqm
12 B-15-8 Brick work with 1st class bricks in cement mortar (1:6)
(b) In superstructure, ground floor
12.1 GRID - 1 1 33.75 0.25 2.75 23.20
GRID - A 2 16.625 0.25 2.8 23.28
GRID - 7 2 5.75 0.25 2.75 7.91
GRID - C 2 8.875 0.25 2.75 12.20
GRID - 4 2 5.575 0.25 2.75 7.67
GRID - E 2 2.85 0.25 2.8 3.99
GRID - 5 1 10.5 0.25 2.75 7.22
Deduction for W1 -26 1.5 0.25 1.2 -11.70
DO - W2 -4 0.6 0.25 0.9 -0.54
Deduction for verandah -2 8.875 0.25 1.2 -5.33
Deduction for D1 -2 1.2 0.25 2.1 -1.26 66.64 Cum
12.2 For 1st Floor (Same as Ground Floor) 66.64 66.64 Cum
12.3 For 2nd Floor (Same as Ground Floor) 66.64 66.64 Cum
12.4 Mumpty room
GRID - 6 2 5.75 0.25 2.07 5.97
GRID - 7 2 5.75 0.25 2.07 5.97
GRID - A, C. 2 3.125 0.25 2.07 3.24
GRID - J, L. 2 3.125 0.25 2.07 3.24
Deduction for D1 -2 1.2 0.25 2.1 -1.26 17.16 Cum
125 mm. thick brick work with 1st class bricks in cement mortar (1:4)
13 B-16-16

13.1 In Ground Floor

GRID - 2 & 3 2 33.75 2.75 185.63
SHYAM SUNDAR BHATTACHARYYA Page 18 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
GRID - 4A-4C + 4E-4H + 4J-4L 1 22 2.75 60.50
GRID - 5 & 6 4 5.75 2.75 63.25
GRID - B & K 2 16.625 2.8 93.10
GRID - C3-C4 & J3-J4 2 2.875 2.8 16.10
GRID - D & I 2 7.75 2.8 43.40
GRID - E1-E4, H1-H4 2 7.75 2.8 43.40
GRID - F & G 2 10.625 2.8 59.50
Toilet 4 2.875 2.8 32.20
do 4 2.125 2.8 23.80
Deduction for D1 -14 1.2 2.1 -35.28
Deduction for D2 -8 0.75 2.1 -12.60 573.00 SQM
13.2 For 1st Floor (Same as Ground Floor) 573.00 573.00 SQM
13.3 For 2nd Floor (Same as Ground Floor) 573.00 573.00 SQM
13.4 For Roof Parapet
GRID - 1 1 33.75 0.9 30.38
GRID - A 2 13.5 0.9 24.30
GRID - C 2 5.75 0.9 10.35
GRID - 4 2 5.575 0.9 10.04
GRID - E 2 2.85 0.9 5.13
GRID - 5 1 10.5 0.9 9.45 89.65 SQM
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and raking out
joints including throating, nosing and drip course, scaffolding/staging
where necessary (Ground floor).[Excluding cost of chipping over
14 B-189-1 concrete surface]
a) 20mm thick plaster (External walls) with (1:6) cement mortar.

14.1 In ground floor 2 36.25 4.1 297.25

Outer Walls 2 18.375 4.1 150.68
2 9.625 4.1 78.93
2 3.1 4.1 25.42
Chajja
W1 26 1.8 0.55 25.74

W2 4 0.9 0.55 1.98

D 2 1.5 0.55 1.65
Deduction
W1 -26 1.5 1.35 -52.65
W2 -4 0.6 0.9 -2.16
D -2 1.2 2.1 -5.04
Varandah -2 8.875 1.35 -23.96 497.84 Sqm
14.2 For 1st Floor
Outer Walls 2 36.25 4.1 297.25
2 18.375 4.1 150.68
2 9.625 4.1 78.93
2 3.1 4.1 25.42
Chajja
W1 28 1.8 0.55 27.72

W2 4 0.9 0.55 1.98

Deduction
W1 -28 1.5 1.35 -56.70
W2 -4 0.6 0.9 -2.16
Varandah -2 8.875 1.35 -23.96 499.16 Sqm
14.3 For 2nd Floor
Same as 1st Floor 499.16 499.16 Sqm
14.4 For 3rd Floor
Mampty Room
GRID - 6 4 5.75 2.07 47.73
GRID - 7 4 5.75 2.07 47.73
GRID - A, C. 4 3.125 2.07 25.94
GRID - J, L. 4 3.125 2.07 25.94
Chajja
D1 2 1.3 0.55 1.43

W3 2 1.2 0.55 1.32

Deduction for D1 -4 1.2 2.1 -10.08
W3 -4 0.9 1 -3.60
SHYAM SUNDAR BHATTACHARYYA Page 19 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
PARAPET (OutSide & InSide)
GRID - 1 2 33.75 0.9 60.75
GRID - A 4 13.5 0.9 48.60
GRID - C 4 5.75 0.9 20.70
GRID - 4 4 5.575 0.9 20.07
GRID - E 4 2.85 0.9 10.26
GRID - 5 2 10.5 0.9 18.90 315.69 SQM
c) 15mm thick plaster (Internal walls) with (1:6) cement mortar.
15 B-189-1

15.1 In ground floor

Room (4x3) 14 14 3.075 602.70
Library (2.75x3) 1 11.5 3.075 35.36
Dining (11x6) 1 34 3.075 104.55
Toilet 8 6.876 3.075 169.15
do 2 9.626 0.975 18.77
Short CORRIDOR 2 29.5 3.075 181.43
Long CORRIDOR 1 75.5 3.075 232.16
Stair Hall 2 14.05 3.075 86.41
Deduction
W1 -26 1.5 1.35 -52.65
W2 -4 0.6 0.9 -2.16
D -2 1.2 2.1 -5.04
D1 -28 1.5 2.1 -88.20
D2 -16 0.75 2.1 -25.20
Varandah -2 8.875 1.35 -23.96 1233.32 Sqm
15.2 For 1st Floor 1233.32 1233.32 Sqm
15.3 For 2nd Floor 1233.32 1233.32 Sqm
16 B-189-1-ii c) 10mm thick plaster (ceiling) with (1:4) cement mortar.
16.1 In ground floor.
Room (4x3) 14 4 3 168.00
Library (2.75x3) 1 2.75 3 8.25
Dining (11x6) 1 11 6 66.00
Toilet 2 5.875 3 35.25
Short CORRIDOR 2 12.75 2 51.00
Long CORRIDOR 1 35.75 2 71.50
Stair Hall 2 3.9 3.125 24.38 424.38 Sqm
16.2 For 1st Floor (Same as Ground Floor) 424.38 424.38 Sqm
16.3 For 2nd Floor (Same as 1st Floor) 424.38 424.38 Sqm
Applying Interior grade Acrylic Primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive
Distemper/ Acrylic emulsion paint including scraping and preparing the
surface throughly, complete as per manufacturer's specification and as
17 B-195-7-b-ii per direction of the EIC. (a) One Coat i) Water based interior grade
Acrylic Primer (b) Two Coats ii) Solvent based interior grade Acrylic
Primer

For Ground Floor (Same as internal Plaster Area & Cilling Area)
17.1 1657.70 1657.70 sqm

For 1st Floor (Same as internal Plaster Area & Cilling Area)
17.2 1657.70 1657.70 sqm

For 2nd Floor (Same as internal Plaster Area & Cilling Area)
17.3 1657.70 1657.70 sqm
Applying Acrylic Emulsion Paint of approved make and brand on walls
and ceiling including sand papering in intermediate coats including
putty (to be done under specific instruction of Superintending
18 B-201-4-ii
Engineer) : (Two coats) ii) Luxury Quality

18.1 For Ground Floor (Same as Primer Area) 1657.70 1657.70 Sqm
18.2 For 1st Floor (Same as Primer Area) 1657.70 1657.70 Sqm
18.3 For 2nd Floor (Same as Primer Area) 1657.70 1657.70 Sqm

SHYAM SUNDAR BHATTACHARYYA Page 20 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface toreceive decorative
textured(matt finish) or smooth finish acrylic exterior emulsion paint
including scraping and preparing the surface throughly, complete as per
19 B-196-8-b manufacturer's specification and as per direction of the EIC . In Ground
Floor: (a) One Coat

19.1 For Ground Floor (Same as External Plaster Area) 497.84 497.84 Sqm
19.2 For 1st Floor (Same as External Plaster Area) 499.16 499.16 Sqm
19.3 For 2nd Floor (Same as External Plaster Area) 499.16 499.16 Sqm
19.4 For Mampty Room (Same as External Plaster Area) 315.69 315.69 Sqm
Protective and Decorative Textured exterior high class matt finish paint
of approved quality, composed of special Tharmoplastic Resin
containing fine crystalline additives derive from Granite as per
manufacturer's specification and as per direction of EIC to be applied
20 B-197-16 over acrylic primer as required. The rate includes cost of material,
labour, scaffolding and all incidental charges but excluding the cost of
primer.Two Coats.

20.1 For Ground Floor (Same as External Plaster Area) 497.84 497.84 Sqm
20.2 For 1st Floor (Same as External Plaster Area) 499.16 499.16 Sqm
20.3 For 2nd Floor (Same as External Plaster Area) 499.16 499.16 Sqm
20.4 For Mampty Room (Same as External Plaster Area) 315.69 315.69 Sqm
Artificial stone in floor, dado, staircase etc. with cement concrete
(4:2:1) with stone chips laid in panels as directed with topping made
with ordinary/white cement (as necessary) and marble dust in
proportion 2:1 including smooth finishing and rounding off corners and
including application of cement slurry before flooring works, using
21 B-48-6 iii cement @1.75kg./sq.m. all complete including all materials and labour.
3mm thk topping with ordinary cement.
a) 25mm thick

21.1 i) Ground Floor

Room (4x3) 14 4 3 168.00
Scarting 14 14 0.15 29.40
Library (2.75x3) 1 2.75 3 8.25
Scarting 1 11.5 0.15 1.73
Dining (11x6) 1 11 6 66.00
Scarting 1 34 0.15 5.10
Short CORRIDOR 2 12.75 2 51.00
Scarting 2 29.5 0.15 8.85
Long CORRIDOR 1 35.75 2 71.50
Scarting 1 75.5 0.15 11.33
Riser of Stair 20 3.125 0.15 9.38
Trade + Half Landing 2 3.9 3.125 24.38
Scarting 2 10.925 0.15 3.28 458.20 Sqm
21.2 For 1st Floor 458.20 458.20 Sqm
21.3 For 2nd Floor 458.20 458.20 Sqm
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors
to match with the existing work & 4 nos. of key stones (10mm) fixed
with araldite at the back of each tile & finishing the joints with white
cement mixed with colouring oxide if required to match the colour of
tiles including roughening of concrete surface, if necessary or by
synthetic adhesive & grout materials etc. With Sand Cement Mortar
(1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles
using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry
@ 0.20kg/Sq.m. (a) Area of each tile Above 0.09 Sq.m. (i) Coloured
decorative
22 B-64-35 (A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement
slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling
using white cement slurry @ .20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m

SHYAM SUNDAR BHATTACHARYYA Page 21 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
(i) Coloured decorative
22.1 For G.F 2 5.875 3 35.25 35.25 Sqm

22.2 For 1st Floor 2 5.875 3 35.25 35.25 Sqm

22.3 For 2nd Floor 2 5.875 3 35.25 35.25 Sqm
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors
to match with the existing work & 4 nos. of key stones (10mm) fixed
with araldite at the back of each tile & finishing the joints with white
cement mixed with colouring oxide if required to match the colour of
tiles including roughening of concrete surface, if necessary or by
synthetic adhesive & grout materials etc. With Sand Cement Mortar
(1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles
using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry
@ 0.20kg/Sq.m. (a) Area of each tile Above 0.09 Sq.m. (i) Coloured
decorative
(B) Wall
23
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement
slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling
using white cement slurry @0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m
(i) Coloured decorative.

23.1 For G.F 16 2 2.1 67.20

12 3 2.1 75.60
2 1.685 2.1 7.08
Deduction For Door D2 -16 0.75 2.1 -25.20 124.68 Sqm
23.2 For 1st Floor (Same as GF) 124.68 124.68 Sqm
23.3 For 2nd Floor (Same as GF) 124.68 124.68 Sqm
Wood work in door and window frame fitted and fixed in position
complete including a protective coat of painting at the contact surface
of the frame exluding cost of bconcrete, Iron Butt Hinges and M.S
24 B-114-1.e clamps. (The quantum should be correted upto three decimals). (d) Sal :
Local.

24.1 Ground Floor

For D 2 5.4 0.75 0.1 0.81
For D1 14 5.2 0.75 0.1 5.46
5.46 Cum
Door Frame 1st Floor
24.2 (Same as Ground Floor)
For D 1 5.4 0.75 0.1 0.41
For D1 14 5.2 0.75 0.1 5.46
5.46 Cum
Door Frame 2nd Floor
24.3 (Same as 1st Floor) 5.46 Cum

24.4 Door Frame 3nd Floor 2 5.2 0.75 0.1 0.78 0.78 Cum
Panel shutters of door and window, as per design (each panel consisting
of single plank without joint), including fitting and fixing the same in
position but
excluding the cost of hinge and other fittings.
25 B-117-1 In ground floor. (iii) 35mm thick shutters with 19mm thick panel of
size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra,
Hallak

25.1 Ground Floor

For D 2 1.2 2.1 5.04
For D1 14 1 2.1 29.40
0 0 0.00 34.44 Sqm
Door Shutter 1st Floor
25.2 (Same as Ground Floor)
For D 1 1.2 2.1 2.52
For D1 14 1 2.1 29.40
0 0 0.00 31.92 Sqm
Door Shutter 2nd Floor
25.3 (Same as 1st Floor) 31.92 Sqm

SHYAM SUNDAR BHATTACHARYYA Page 22 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
25.4 Door Shutter 3rd Floor 2 1 2.1 4.20 4.20 Sqm
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite
door frame as per approved section with glass fibre reinforced plastic
moulded skins and a special sandwich core, so as to impart
monolitaheic composite structure as per approved technology of
26 B-115-3 Department of Science and Technology (DST) to safisfy IS: 4020 door
testing performance criteria.
(i) 66mm x 90mm

For D2 24 4.95 118.80 118.80 Mtr.

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite
door shutters as per approved design with glass fibre reinforced plastic
moulded skins and a special sandwich core, so as to impart
monolitaheic composite structure as per approved technology of
Department of Science and Technology (DST) to satisfy IS:4020 door
27 B-125-14 testing performance criteria.
In ground floor.
(ii) 25 mm thick

For D2 24 0.75 2.1 37.80 37.80 Sqm

Supplying, fitting and fixing M.S. clamps for door and window frame
made of flat bent bar, end bifurcated with necessary screws etc. by
cement concrete(1:2:4) as per direction. (Cost of concrete will be paid
28 B-140-4b
separately) ( b)
40mm X 6mm, 200mm Length

For D1 & D2 (34 nos each floor)

Total Door = 24+23X2+2=72 Nos 192 192.00 192.00 Nos
4 nos for each Door
Iron butt hinges of approved quality fitted and fixed with steel screws,
29 B-140-5 viii with ISI mark. 100 mm x 75 mm x
3.50 mm
For D1 & D2 (34 nos each floor)
Total Door = 24+23X2+2=72 Nos 288 288.00 288.00 Nos
6 nos for each Door
Anodised aluminium floor Door stopper.(Brass) fitted and fixed in
30 B-143-19 i position with steel screws.
For D1 & D2 (34 nos each floor)
Total Door = 24+23X2+2=72 Nos 48 48.00 48.00 Nos
Supplying, fitting and fixing Renewing 125mm long wooden buffer
31 B-150-15 ii block in position with necessary screws etc. complete in all respect. i)
With Sal : Siliguri.
For D1 & D2 (34 nos each floor)Total Door = 24+23X2+2=72 Nos
48 48.00 48.00 Nos
Stainless steel D-type handle of approved quality manufactured from
304 grade material fitted and fixed. With continuous plate base
32 B-145-30 vi (Hexagonal / Round rod). 150 mm grip x 10 mm dia rod.

For D1 & D2 (34 nos each floor)

Total Door = 24+23X2+2=72 Nos 96 96.00 96.00 Nos
2 nos for each Door
Anodised aluminium Aldrop / Sliding bolts of approved quality
manufactured from extruded section conforming to I.S. specification
33 B-145-28 (I.S. 2681/66) fitted and
fixed complete. (ii) 250mm x 19mm dia. bolt.

For D1 & D2 (34 nos each floor)Total Door = 24+23X2+2=72 Nos

48 48.00 48.00 Nos
Iron skeleton bolt of approved quality fitted and fixed complete.
34 B-141-9 (b) 450mm long x 10mm dia rod

For D1 & D2 (34 nos each floor)Total Door = 24+23X2+2=72 Nos

48 48.00 48.00 Nos
Priming one coat on timber or plastered surface with synthetic oil
35 B-200-1-b bound primer of approved quality including smoothening surfaces by
sand papering etc.
D (M.F=2.6, NOS=3) 7.8 1.2 0 2.1 19.66
SHYAM SUNDAR BHATTACHARYYA Page 23 of 33
 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
D1 (M.F=2.6, NOS=30) 78 1 2.1 163.80 183.46 Sqm
Painting with best quality synthetic enamel paint of approved make and
brand including smoothening surface by sand papering etc. including
using of approved putty etc. on the surface, if necessary
36 B-200-2-a a) on timber or plastered surface with super gloss (hi-gloss) Two coats
(with any shade except white)

Same as Primer Area 183.46 183.46 Sqm

Supplying profiles of required section made of Aluminium Alloy
Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized
(with required film thickness and specified colour / natural) matt
finished conforming to IS: 1868-1983 for fabrication of composit door,
sliding & casement windows, partitions, formed of basic sections of
any ISI embossed / certified make and brand as per direction of
Engineer - In- Charge. (Payment will be made on finished length of the
37 B-233-1 work).
(A) In 10-12 Micron thickness Annodizing film.
II) Coloured a) 2- track sliding window

W1(1500x1200)

37.1 Bottom frame

Bottom frame for W1
At GF - 26 Nos
At 1st Floor - 28 Nos 82 1.5 123.00
At 2nd Floor - 28 Nos

Bottom frame for W2

At Each Floor - 4 Nos, Total = 12 Nos 12 0.75 9.00
Bottom frame for W3
At Mampty Room - 2 Nos 2 0.9 1.80 133.80 Mtr.

37.2 Top & Side frame

For W1
At GF - 26 Nos
At 1st Floor - 28 Nos 82 4.2 344.40
At 2nd Floor - 28 Nos

For W2
At Each Floor - 4 Nos, Total = 12 Nos 12 2.4 28.80
For W3
At Mampty Room - 2 Nos 2 2.9 5.80 379.00 Metr

37.3 Shutter frame

Shutter frame all side for W1 (1500X1350) 82 5.7 467.40
Shutter frame all side for W2 (600X900) 12 3 36.00
Shutter frame all side for W3 (900X1000) 2 3.8 7.60 511.00 Metr
Supplying bubble free float glass of approved make and brand
38 B-243-9 conforming to IS: 2835-1987.
iv) 5mm thick coloured / tinted / smoke glass.
For W1 (1500X1350) 82 1.5 1.35 166.05
For W2 (600X900) 12 0.6 0.9 6.48
For W3 (900X1000) 2 0.9 1 1.80 174.33 Sqm
Supplying PVC rollers for sliding windows as per direction of Engineer
39 B-242-6 in charge.
4 Nos Each
For W1 (1500X1350) 328 328.00
For W2 (600X900) 48 48.00
For W3 (900X1000) 8 8.00 384.00 Nos
40 B-242-7 Supplying maruti lock (100mm)
2 Nos Each
For W1, W2 & W3 192 192.00 192.00 Nos
Supplying EPDM gusket of approved make and brand as per direction
of Engineer in charge.
41 B-242-8 i) For sliding windows
b) 'U' shaped EPDM gasket for frames.

For W1 (1500X1350) Total Shutter Length 1 467.40 467.40

For W2 (600X900) Total Shutter Length 1 36.00 36.00
For W3 (900X1000) Total Shutter Length 1 7.60 7.60 511.00 Metr

SHYAM SUNDAR BHATTACHARYYA Page 24 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Labour charge for fabrication and installation of composite door,
window, partitions made from annodized extruded alloy aluminium
sections for the following units:-
A) Glazed aluminium sliding windows made of extruded and
annodized alloy aluminium sectios, fabrications, including cutting to
proper shape and size, drilling and aligning of window shutter frame
fitted with in built locking arrangements, sliding rollers and other
necessary fittings, fixture, adhesives and joineries along with extruded
neoprine or EPDM gasketing in between window frame and masonry
work (walls, column, beam.lintels etc.) as well as between glass and
shutter frame for fixing glass and Polysulphide sealant and in between
shutter and window frame where necessary including cutting to
42 B-239-2 requisite size and fixing glass as per drawing, specification and
direction of EIC. The rate includes the hire charge of all tools and
plants, including all incidental charges, adhesive, joineries such as
screw, cleat angle etc. but excluding the cost of extruded aluminium
sections, glass, neoprene / EPDM gasket, locking arrangement and
rollers.
i ) 2 track sliding window.

For W1 (1500X1350) 82 1.5 1.35 166.05

For W2 (600X900) 12 0.6 0.9 6.48
For W3 (900X1000) 2 0.9 1 1.80 174.33 Sqm
M.S. or W.I. Ornamental grill of approved design, joints continuously
welded with M.S. or W.I. Flats and bars for windows, railing etc. fitted
and fixed with necessary screws and lugs in ground floor.
43 B-104-13-ii
a)Grill weighing upto 16 Kg./sq.mtr and above.

43.1 (for ground floor)

For W1 (1500X1350) 26 1.5 0 1.35 52.65
For W2 (600X900) 4 0.6 0 0.9 2.16
Varandah 1 8.875 1.35 11.98
66.79 Sqm
@ 16 Kg/ Sqm = 10.69 10.69 Qntl.
43.2 For 1st Floor
For W1 (1500X1350) 28 1.5 0 1.35 56.70
For W2 (600X900) 4 0.6 0 0.9 2.16
Varandah 1 8.875 1.35 11.98
70.84 Sqm
@ 16 Kg/ Sqm = 11.33 11.33 Qntl.
43.3 For 2nd Floor
For W1 (1500X1350) 28 1.5 0 1.35 56.70
For W2 (600X900) 4 0.6 0 0.9 2.16
Varandah 1 8.875 1.35 11.98
70.84 Sqm
@ 16 Kg/ Sqm = 11.33 11.33 Qntl.
43.4 For Mumpty room gate
For W3 (900X1000) 2 0.9 0 1 1.80
1.80 Sqm
@ 16 Kg/ Sqm = 0.29 0.29 Qntl.
(a) Priming one coat on steel or other metal surface with synthetic oil
44 B-200-1-a bound primer of approved quality including smoothening surfaces by
sand papering etc.
On Grill Surface
For Ground floor 66.79
For 1st Floor 70.84
For 2nd Floor 70.84
For Mumpty room gate 1.80 210.27 Sqm

SHYAM SUNDAR BHATTACHARYYA Page 25 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
(A) Painting with best quality synthetic enamel paint of approved make
and brand including smoothening surface by sand papering etc.
including using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
45 B-200-2-a With other than hi-gloss of approved quality
iv) Two coats (with any shade except white)

Same as priming coat 210.27 210.27 Sqm

Neat cement punning about 1.5mm thick in wall, dado, window sill,
46 B-192-15 floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
Out Side of Building
2 36 0.9 64.80
2 18.125 0.9 32.63
2 9.625 0.9 17.33
2 5.8 0.9 10.44
2 3.1 0.9 5.58 130.78 Sqm
80 mm thick interlocking designer concrete paver block M-40 grade for
medium-traffic zone & utility cuts on arterial roads etc. as per IS:
15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/
WMM base course & 250 mm thk bound gnaular/ granular sub-base
course & filling the interstices of blocks with fine sand by brooming &
subsequent watering including cost of sand for sand bed but excluding
cost of base, sub-base course & subgrade preparation.) complete as per
47 B-286-8 direction of Engineer-in-Charge.
[Note: Subgrade CBR shouldnot be less than 5]
Colour Decorative

Out Side the Building 1 36.25 2.25 81.56

do 1 23.125 6.5 150.31
do 2 5.8 3.12 36.19 268.06 Sqm
Supplying and laying chequered tiles of any shade & of approved
quality with (1:1½:3) cement concrete laid in panels or patterns as
directed in pavement, footpath etc. including necessary underlay 25
mm thick [avg] cement mortar (1:3) complete in all respect with all
labour and materials. [Using cement slurry @ 4.4 kg/Sq.m at back side
48 B-74-46 and @2.4 kg/Sq.m for joint filling]
Red Variety
(i) 25 mm. thick

Out Side Stair 2 2.25 1.495 6.73

Riser 2 1.495 0.9 2.69
Ramp 2 3.3 1 6.60 16.02 Sqm
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia
and 900mm height vertical balustrade at every two alternative steps,
50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel
pipe and base/cover plate with Strainless Steel GRADE 304 containing
49 B-109-22 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per
direction of the Engineer-in-charge. Weight of Strainless Steel railing
per metre 6.5 Kg (approx)

Inside Stair
GF to 1st Floor 2 6.12 12.24

1st to 2nd Floor 2 6.12 12.24

2nd to Roof 2 7.62 15.24
Out Side Stair 2 6.8 13.60 53.32 Mtr.

SHYAM SUNDAR BHATTACHARYYA Page 26 of 33

 QUANTITY SURVEY SESSIONAL

NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Building Part
Sl. Referance Cum.
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item Qty
Supplying & laying 3mm thick pre-fabricated plastomeric water
proofing membrane conforming to EN 12311-1 & ASTMD 5147,
manufactured with atactic poly propylene (APP) modified premium
grade asphalt , specially reinforced with non-woven polyester core with
polyester reinforcement @160 gms per sqm & both faces covered with
thermo-fusible polyethylene film /MineraL on top face over a coat of
primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean
dry surface prepared wherever required. Lap joint shall be provided of
75 mm in longitudinal & 100 mm in transverse direction and fused
using LPG/ Propane torch employing extra care ensuring full bondage,
complete removal of entrapped air and sealing edges into grooves in
appropriate manner as per direction of Engineer -in-charge all complete
50 B-92-4 including materials,labour and applicable taxes. (Payment shall be
made on the basis of finished surface area.). Membrane Property:
Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile
Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength,
N: 300 (longitudinal), 200 (transverse)

Up on Roof 1 36.25 8.75 317.19

Do 2 9.625 6.5 125.13
Do 1 11.5 3.1 35.65 477.97 Sqm

SHYAM SUNDAR BHATTACHARYYA Page 27 of 33

 JADAVPUR UNIVERSITY
NAME :- SHYAM SUNDAR BHATTACHARYYA; ROLL- 001810403021 ; CLASS :- 3rd YEAR 2nd SEM;
SUBJECT:-QUANTITY SURVEY SESSIONAL
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Sanitary and Plumbing Part
Sl. Referance CUM
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item QTY
Supplying, fitting and fixing PVC pipes of approved make of schedule
-80 (medium duty) confirm to ASTMD - 1785 and threaded to match
with GI pipe as per IS: 1239 (Part-I) with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,
reducing socket, reducing tee, short piece etc. fitted with holder bats
clamps, including cutting pipes, making threads, fitting, fixing etc.
complete in all respect including cost of all necessary fittings as
required,jointing materials and two coats of painting with approved
[i/no.19I, Sec
51 paint in any position above ground. (Payment will be made on the
A-A(II)] P-12
centre line measurements of total pipe line including all specials. No
separate payment will be made for accesories, specials. Payment for
painting will be made seperately)

(A) For Exposed Work PVC PIPES

51.1 15 mm 1 160.00 160.00 160.00 Mtr.
51.2 20 mm 1 50 50.00 50 Mtr.
51.3 25 mm 1 40 40.00 40 Mtr.
51.4 50 mm 2 11 22.00 22 Mtr.
51.5 80 mm 1 40 40.00 40 Mtr.
51.6 100 mm
Soil Pipe 1 75 75.00
Rain Water Pipe 22 11 242.00 317.00 Mtr.
51.7 150 mm 1 30 30.00 30.00 Mtr.
(B) For Concealed Work PVC PIPES
51.8 15 mm 12 15 180.00 180.00 Mtr.
51.9 20 mm 12 8 96.00 96 Mtr.
Supplying, fitting and fixing gunmetal wheel valve of approved brand
[i/no.5, Sec A- and make tested to 21 kg per sq. cm. (for water lines only).
52
A(II)]

52.1 (iv) 50 mm dia 4 4.00 4.00 Each

52.2 (vii) 25 mm dia 12 12.00 12.00 Each
52.3 (viii) 20 mm dia 24 24.00 24.00 Each
(B) Fittings
Section-B,
Sanitary
53 Drainage (B)-
(II), Item no.
23-(B)
xi) Door Bend (T.S.)
53.1 (b) 110 mm 35 35.00 35.00 Each
xv) Vent Cowl
53.2 (a) 75 mm 2 2.00 2.00 Each
53.3 (b) 110 mm 2 2.00 2.00 Each
53.4 xxi) 110 x 110 "P" Trap 12 12.00 12.00 Each
Supplying, fitting and fixing CI holder bad clamp including cutting
[i/no.14, Sec A- holes in wall ect. and mending good all damages in cement concrete
54
A(II)] P-10 with jhama chips (4:2:1) and cement plaster (6:1) to match and curing
complete in all respect.

54.1 (i) 15 mm dia 340 340.00 340.00 Each

54.2 (ii) 20 mm dia 146 146.00 146.00 Each
54.3 (iii) 25 mm dia 40 40.00 40.00 Each
54.4 (ix) 100 mm dia 159 159.00 159.00 Each

Page 28 of 33
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Sanitary and Plumbing Part
Sl. Referance CUM
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item QTY
Supplying, fitting and fixing PVC pipes for underground work of
approved make of schedule -80 (medium duty) confirm to ASTMD -
1785 and threaded to match with GI pipe as per IS: 1239 (Part-I) with
all necessary accessories, specials viz. socket, bend, tee, union, cross,
elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.
fitted with holder bats clamps, including cutting pipes, making threads,
fitting, fixing etc. fitted including cost of materials, jointing materials,
cutting pipes, making threads, cutting trench up to 1.5 metre below
[i/no.19II, Sec surface of all sort of soil and refilling the same as directed complete in
55
A-A(II)] P-13 all respect. (Payment will be made on the centre line measurements of
total pipe line including all specials. No separate payment will be made
for accesories, specials. Payment for painting will be made seperately)

PVC PIPES
80 mm 1 45 45.00 45.00 Mtr.
Supplying, fitting and fixing white vitreous china best quality approved
make wash basin with C.I. brackets on 75 mm X 75 mm wooden
blocks, C.P. waste fittings of 32 mm dia., one approved quality brass
C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm
[i/no.-2(i) , dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900
56
Section A-(V)] mm long approved quality P.V.C. connection pipe with heavy brass
C.P. nut including mending good all damages and painting the brackets
with two coats of approved paint.

(iii) 630 mm X 450 mm size

2 Nos for Each Floor 6 6.00 6.00 Each

Supplying, fitting and fixing pedestal of approved make for wash basin
57 S-41-3 (white)
2 Nos for Each Floor 6 6.00 6.00 Each
Supplying, fitting and fixing stainless steel sink complete with waste
58 S-42-6 fittings and two coats of painting of C.I. brackets.

(ii) 630 mm X 550 mm X 180 mm 1 1.00 1.00 Each

CP Sink Cock with regular swinging spout (table mounted model)
[item/no.19/g, i) (Equivalent to code no. 5357 of Jaquar or similar brand)
59 1 1.00 1.00 Each
Section A-(v)]

Supplying, fitting and fixing E.W.C. in white glazed vitreous

60 S-79-2 chinaware of approved make complete in position with necessary bolts,
nuts etc
(a) With 'P' trap
4 Nos Per Floor 12 12.00 12.00 Each

Supplying, fitting and fixing Closet seat of approved make with lid and
[i/no.10) A, II), C.P. hinges, rubber buffer and brass screws complete.
61
Sec B-(III)]

(a) E.W.C. (i) Plastic (hallow type) WHITE 12 12.00 12.00 Each
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make
[i/no.11) i), Sec with necessary fixing materials and clamps complete.
62
B-(III)]

i) Polythene Flush Pipe 12 12.00 12.00 Each

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern
[i/no.2, Sec A- conforming to I.S. specification with P.V.C. fittings complete,C.I.
63 brackets including two coats of painting to bracket etc. 12 12.00 12.00 Each
(IV)]

Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall

[It no.3/f, Sec Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or
64 12 12.00 12.00 Each
A-(II)] similar).
Supplying, fitting and fixing Flat back urinal (half stall urinal) in
[i/no.-6 (i) , white vitreous chinaware of approved make in position with brass
65 Section B, B- screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
(III)]

(i) 635 mm X 395 mm X 420 mm

4 Nos For Each Floor 12 12.00 12.00 Each

Page 29 of 33
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Sanitary and Plumbing Part
Sl. Referance CUM
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item QTY
Supplying, fitting and fixing porcelain partition wall of approved make
[i/no.14, Sec B- of size 618 mm X 310 mm complete in all respect.
66 12 12.00 12.00 Each
(III)]

[item/no.7,a, ii), (ii) Chromium plated Bib Cock long body with wall flange with aerator
67 Section A-(II)] (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of 12 12.00 12.00 Each
P-6 ESSCO or similar brand)
i) Chromium plated Angular Stop Cock with wall flange (Equivalent to
[i/no.7/d/i, Sec Code No. 5053 & Model - Florentine of Jaquar or similar brand).
68
A-(II)]

For Cistern 12 12.00

For Basin 6 6.00
For Sink 1 1.00
For Urinal 12 12.00
For Hand Faucet 12 12.00 43 Each
ii) Chromium plated Concealed Stop Cock (Equivalent to Code No.
Item/no.7,b, ii), 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar
69
P-6 brand).
4 Nos For Each Floor 12 12.00 12.00 Each
Supplying, fitting and fixing shower of approved brand and make.
(a) (i) Chromium plated round shower with revolving joint 100 mm dia
with rubid cleaning system (Equivalent to Code No. 542(N) & Model
70 S-3-3 Tropical / Sumthing Special of ESSCO or similar brand). 12 12.00 12.00 Each

Supplying, fitting and fixing shower of approved brand and make.

(a) (iii) Chromium plated shower arm 240 mm long (Equivalent to
Code No. 536(A) & Model - Tropical / Sumthing Special of ESSCO or
71 S-4-3 12 12.00 12.00 Each
similar brand).

[i/no.-20, Sec Supplying, fitting and fixing C.P. Extension Pipe

72 12 12.00 12.00 Each
A-(V)] P-46
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR
[i/no.-9(iii) , white flexible, with both ends coupling with heavy brass C.P. nut, 15
73
Section A-(V)] mm dia.

i) 600mm long
For Cistern 12 12.00
For Basin 6 6.00
For Sink 1 1.00
For Urinal 12 12.00 31.00 Each
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste
74 S-43-10 pipe, with PVC coupling at one end fitted with necessary clamps.

(iv) 1050 mm long

For Basin 6 6.00
For Sink 1 1.00
For Urinal 12 12.00 19 Each
Supplying, fitting and fixing C.I. square jalli.
Section-B,
Sanitary
Drainage (B)-
75
(II), Item no.
19, i), ii) &
iii)P-67
(i) 100 mm
For Cistern 12 12.00
For Basin 6 6.00
For Sink 1 1.00
For Urinal 12 12.00
For Bath 12 12.00 43.00 Each
[i/no.17, Sec B- Supplying, fitting and fixing liquid soap container.
76 (a) Cromium plated.
(III)]
For Basin 6 6.00
For EWC 12 12.00 18.00 Each
Supplying, fitting and fixing towel rail with two brackets.
77 S-82-22 (a) C.P. over brass 12 12.00 12.00 Each
(ii) 25 mm dia. and 600 mm long

Page 30 of 33
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Sanitary and Plumbing Part
Sl. Referance CUM
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item QTY
Supplying, fitting and fixing porcelain soap tray of approved make.
78 S-83-24 (i) Recessed soap tray of size 150 mm X 150 mm 12 12.00 12.00 Each

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver
[i/no.15, Sec B- red as per I.S. 3438 / 1965 together with brass C.P. hinges.
79
(III)]

(i) 600 mm X 450 mm 6 6.00 6.00 Each

[It no.3/e, Sec Chromium plated double coat Hook(Equivalent to Code No. 35761 &
80 Model - KUBIX of Jaquar or similar). 36 36.00 36.00 Each
A-(II)]
Constructing Inspection pit of inside measurement 600mm X 600mm X
upto 600mm (depth) with 250 mm thick 1st. class brick work in cement
mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick
cement concrete (1:3:6) with stone chips over a layer of jhama brick
flat soling,15 mm thick (1:4) cement plaster to inside walls and out-
side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit,
providing necessary invert with cement concrete (1:3:6) with stone
chips as per direction, neat cement finishing to entire internal surfaces,
top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with
stone chips and necessary reinforcements upto 1% and shuttering
including 6 mm thick cement plaster (1:4) in all external surfaces of the
81 S-87-1 slab and one 560 mm dia. R.C.C. manhole cover of approved make
supplied, fitted and fixed in the slab with necessary fittings, necessary
earthwork in excavation in all sorts of soil, filling sides of the pit with
earth and removing spoils after work complete in all respect with all
costs of labour and materials.

ii) With PAKUR Varitey 10 10.00 10.00 Each

iii) Extra for each additional depth of 150 mm or part thereof beyond
initial 600 mm depth. 10 10.00 10.00 Each

Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm

thick 1st class brick work (1:4) in all sides over a layer of jhama brick
soling and 150 mm thick cement concrete with stone chips (1:3:6)
including necessary earth work, fitting and fixing approved type S.W.
master trap, constructing masonry invert with cement concrete (1:1.5:3)
with stone chips, plastering inside and outside (outside upto 300 mm
below G.L.) with 20 mm thick cement plastering (1:4) and neat cement
punning, including supplying,fitting and fixing one 560 mm. dia R.C.C.
manhole cover of approved make with R.C.C. slab of 100 mm thick
with cement concrete (1:1.5:3) with stone chips including necessary
reinforcement (upto 1%) and shuttering and necessary corbelling
82 S-87-2 brickwork (1:4) so that the R.C.C. cover slab rests 150 mm above
adjacent G.L., cement plaster (1:4) 10 mm thick on all external surfaces
of the top slab as directed complete in all respect and removal of
surplus earth with all costs of labour and materials. (Excluding the cost
of Master trap only)

(i) 900 mm X 750 mm (inside) chamber including fitting and fixing

S.W. master trap of 150 mm dia. of approved make A) With Pakur 4 4.00 4.00 Each
variety. (SAIL/TATA/RINL)
Construction of septic tank of different capacities as per approved
drawing with 1st class brick work in cement mortar (1:4) including two
560 mm dia. R.C.C. manhole cover(heavy type)of approved make
supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab
with necessary fittings, 20mm thick cement plaster (4 : 1)with neat
cement finish to the internal surfaces and 15 mm thick cement plaster
83 S-88-3
(4 : 1)to outside wall upto 200 mm below G.L floor finished with 25
mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3)
bottom

Page 31 of 33
NAME OF THE WORK :- QUANTITY CALCULATION OF A PROPOSED G+II HOSTEL BUILDING FOR 75 NOS STUDENTS
Sanitary and Plumbing Part
Sl. Referance CUM
Description of Item Nos Length Breadth H/D Qty Unit
No. Page-Item QTY
slab including supplying, fitting and fixing all necessry specials,
fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all
sorts of soil, shoring, bailing out and pumping out water as necessary,
ramming, dressing the bed and fefilling the sides of the tanks with
earth, removing spoils, filling up the chamber with clear water,
removing foreign materials from the chamber and including
constructing attached inspection pit as per approved drawing and
connecting all necessary pipes, joints etc. with internal plaster work and
artificial stone flooring is to be done with admixture of water proofing
compound @ 0.5% by weight of cement with all costs of labour and
materials.

Note:- (i) Finished level of Septic Tank should be 400 mm. from
Ground Level.
(ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should
be follwed as per IS:2470,PartI.Payment will be made separetly on the
basis of actual height based on relevant I.S.Code.

(v) For 100 users

A) With Pakur variety. (SAIL/TATA/RINL) 1 1.00 1.00 Each

Construction of circular soak well 2.5 metre deep in all types of sandy
soils with dry brick work upto 1.6 metre from the bottom having 150
mm intermediate cement brick work (1:4)band all round and cement
brick work (1:4)upto 0.90 metre from top with 20mm thick cement
plastering (1:4)to inside face upto the depth of cement brick work,
15mm thick cement plaster (1:4)on outer face from top of the well upto
G.L. and 6 mm thick cement plaster (1:4)on top of the R.C.C. cover
slab including filling bottom 1.00 metre of inside of the well with brick
metal (50 mm to 63 mm size)including R.C.C. cover slab of 100 mm
thick with cement conc (1:1.5:3)with stone chips with necessary
reinforcement and shuttering including one 560 mm dia. R.C.C.
manhole cover (heavy type)of approved make supplied, fitted and fixed
84 S-89-4 in the cover slab with necessary fittings, making nacessary
arrangements for pipe connections, excavation of well including
shoring, dewatering and removing the exess earth from the premises as
per direction complete in all respect with all costs of labour and
materials. With 250 mm thick dry brick work and 250 mm thick
cement brick work (1:6)and 1.00m inside dia.
(SAIL/TATA/RINL)

2 2.00 2.00 Each

Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of
approved make with rim of approved make (Heavy type)
85 S-91-7 (ii) 560 mm dia. 2 2.00 2 Each

Page 32 of 33
 Analysis of Concrete OF M20
BASE PRICE OF CONCRETE VIDE PAGE NO.24 ITEM NO.5 ₹ 4,756.00
COST OF STONE AGGREGATE AT SEALDAH RLY. YARD
SIZE QUANTITY UNIT RATE AMOUNT
20MM 0.54 Cum ₹ 1,430.00 ₹ 772.20
10MM 0.36 Cum ₹ 1,299.00 ₹ 467.64
TOTAL ₹ 1,239.84
CARRIAGE COST OF STONE AGGREGATE FROM SEALDAH RLY. YARD TO WORKSITE 20 K.M.
LEAD 20.00 K.M.
UPTO 5 K.M. ₹ 124.00
UPTO 10 K.M. = 5.0 10.90 ₹ 54.50
UPTO 20 K.M. = 10.0 10.10 ₹ 101.00

TOTAL = 0.90 X ₹ 279.50 ₹ 251.55

LOADING/UNLOADING 0.90 X ₹ 58.00 ₹ 52.20

TOTAL COST ₹ 6,299.59

Analysis of Ordinary Cement Concrete OF MIX 1:2:4

BASE PRICE OF CONCRETE VIDE PAGE NO.24, ITEM NO.4 (3rd Cori.) ₹ 4,060.00
COST OF STONE AGGREGATE AT SEALDAH RLY. YARD
SIZE QUANTITY UNIT RATE AMOUNT
20MM 0.66 Cum ₹ 1,430.00 ₹ 943.80
10MM 0.22 Cum ₹ 1,299.00 ₹ 285.78
TOTAL ₹ 1,229.58
CARRIAGE COST OF STONE AGGREGATE FROM SEALDAH TO WORKSIT (DISTANCE = 20 KM.)
LEAD 5.00 K.M.
UPTO 5 K.M. ₹ 124.00
UPTO 10 K.M. = 5.0 10.90 ₹ 54.50
UPTO 20 K.M. = 10.0 10.10 ₹ 101.00
TOTAL = 0.88 X ₹ 279.50 ₹ 245.96
Loading, Unloading & Stacking 0.88 X ₹ 58.00 ₹ 51.04
TOTAL COST ₹ 5,586.58

Analysis of Reinfoecement
S-1:- BASE PRICE VIDE PAGE NO.43, ITEM NO.40 (10th Cori.) ₹ 60,580.00
S-2:- DEDUCT ISSUE RATE X 1.17 ₹ -43,140.00 ₹ -50,473.80
S-3:- ADD BASIC PRICE INCLUDING GST 12% X 1.17 ₹ 38,160.00 ₹ 44,647.20
S-4:- COST OF CARRIAGE FOR DISTANCE 5 K.M. VIDE P-230, I-5,A (ROAD) ₹ 82.00
LOADING, UNLOADING & NON STACKING @ 0.75 VIDE P-227, I-1.03,h 96 ₹ 72.00
₹ 154.00
₹ 154.00 1.05 ₹ 161.70
TOTAL= ₹ 54,915.10

Shyam Sundar Bhattacharyya (001810403031) Page 33 of 33