1 Packing List 2 Device Interfaces 3 LED Indicators
Quick Start
Guide
RMAR-ENC-101
1 x Video enconder
RMAR-ENC-101
NAME COLOR MODE DESCRIPTION
Input Interface HDMI x 1, VGA x 1, audio x 1
Always ON Power connected
LAN Port x 1, HDMI x 1, VGA x 1,
Output Interface Green
audio x 1 OFF Power Off
Power
Audio Input HDMI-IN/Analog audio-in
Blinking Input signal is normal
RJ45 x 1; Green
Network Interface
Ethernet(10base-t/100base-tx) Status OFF Signal input error
1 x Power adapter
1 x Quick start
guide
Logging into the This will directly open "Network Connections" Change the IP to 192.168.0.XXX (31 is being used by
4 web Inerface
regardless of the version of Windows.
Once you've done that, choose the network adapter
the encoder), fill in the mask and default gateway
and click “OK”.
Now you can configure your encoder!
you want to use, right-click on it and choose “Status”.
Connect the standard DC 12V/1A power adapter to
the device. Once powered on, the power LED will be
continuously on.
Open your web browser and enter the default IP
Then click on “Properties” and select “Internet
Next, connect the encoder directly to a computer address directly, 192.168.0.31, to access the login
Protocol Version 4 (TCP/IPv4)”.
using a network cable. interface. Use admin for both the username and
password, then click "Sign in."
• Press Win + R and type “ncpa.cpl”
Note
Please use the standard power adaptor
provided. Using other unqualified power
supplies may damage the device.
• Press Enter.
Reset/Reboot To reboot the encoder, simply go to “Upgrade” and
5
2
choose the “Uprgrade” option and then click on the
6 DHCP Settings
the encoder “Reboot” button.
When DHCP is enabled, the encoder's IP address is
3
assigned automatically. To set the IP manually,
If the user configures anything that causes the
disable the DHCP option first. Then, the user can
encoder to stop working or not to work correctly, it is
manually configure the encoder’s IP address. If
possible to return to the initial settings by resetting
changing the IP, be sure to update the DNS settings
the encoder to factory defaults.
as well. Go to “Network” tab to configure the new IP.
Method 1# 1
9
There is a RST button on
the front of the encoder. Note
Get a thin material, like a On the same page, you can click the 'Backup' This way you ensure that all settings are correctly
paper clip, and insert button to save the encoder settings to a file modified.
into the RST hole and on your local computer. Settings can also be
hold it for about 10 seconds. When all LED are no restored with a single click by uploading a
loger flashing, the factory default settings have been backup file. Always keep a working backup for
restored. eventual needs.
Method 2# Never power off the encoder while performig
Note a reboot or a factory reset, wait for the end of
Find the “Backup” button in the system settings of Once the user restores the factory settings, the procedures.
the encoder and click on the “Default” button to the IP is changed back to the default:
restore the factory settings. 192.168.0.31, and the login is changed back to
admin and the password is changed back to
admin too.
Note: The encoder needs to reboot after the IP is changed.
Connect the device Step 1: Connect the encoder to th PC. Login to web
7 interface using the default settings:
8 Extra content 9 Support info
to the LAN IP: 192.168.0.31
User: admin
Password: admin
RMAR-ENC-101 Step 2: Check the IP of the network the encoder will Here you can find more information about the Thank you for choosing our video encoder. We are
be connected to. product, you can also download the manual and committed to providing you with the best experience
datasheet. possible. If you encounter any issues or have questions
For example: The IP of the router is 192.168.10.128. regarding the product, our support team is here to
Video source Then the user needs to change the default IP on assist you.
the encoder to Check the IP of the network the
encoder will be connected to.192.168.10.XXX. Support Options
Network infrastructure Step 3: Go to the network settings on encoder and User Manual: For comprehensive guidance on
(routers, switches...) chage the IP, the gateway and the DNS. Press features and functionalities, please refer to the user
“Apply” and reboot the encoder. manual included with your device.
Step 4: Connect the encoder directly on the router Technical Support: If you require further assistance,
using a network cable. Connect the computer to the our dedicated support team is available to help. You
Decoder same network. can reach us through the following methods:
Step 5: Open the browser and enter the new IP. Email: For any inquiries or technical support,
please contact us at [email protected].
If user can´t log in using the new IP, check
Phone Support: For assistance, you can call our
Display the DNS of the router. Then reset the encoder
support at +55 21 2187-2445. Our team is available
and try to login to the web again. Repeat the
Monday to Friday, from 8 AM to 6 PM (local time).
steps and change the IP, gateway and DNS.
