Scribd
Upload
153 views1 page

Btech Ce 8 Sem Pavement Materials and Design Ce Pe 810d 2024

This document is an examination paper for the course 'Pavement Materials and Design' at Maulana Abul Kalam Azad University of Technology, West Bengal. It includes various types of questions: very short answer questions, short answer questions, and long answer questions, covering topics such as the California bearing ratio, mechanical properties of bitumen, and construction specifications for concrete roads. The total marks for the exam are 70, and candidates are required to answer in their own words.

Uploaded by

cas25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
153 views1 page

Btech Ce 8 Sem Pavement Materials and Design Ce Pe 810d 2024

This document is an examination paper for the course 'Pavement Materials and Design' at Maulana Abul Kalam Azad University of Technology, West Bengal. It includes various types of questions: very short answer questions, short answer questions, and long answer questions, covering topics such as the California bearing ratio, mechanical properties of bitumen, and construction specifications for concrete roads. The total marks for the exam are 70, and candidates are required to answer in their own words.

Uploaded by

cas25
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CS/B.

TECH(N)/EVEN/SEM-8/8358/2023-2024/I124
MAULANA ABUL KALAM AZAD UNIVERSITY OF TECHNOLOGY, WEST BENGAL
Paper Code : CE(PE)801D Pavement Materials and Design
UPID : 008358

Time Allo ed : 3 Hours Full Marks :70


The Figures in the margin indicate full marks.
Candidate are required to give their answers in their own words as far as prac cable

Group-A (Very Short Answer Type Ques on)


1. Answer any ten of the following : [ 1 x 10 = 10 ]
(I) Write the importance of California bearing ra o.

(II) Define: flakiness index.


(III) Define: so ening point of bitumen.
(IV) What is the purpose of the joint sealing compound?
(V) What is Modified bitumen ?
(VI) Men on the desirable proper es of highway materials.
(VII) Define: Textural classifica on
(VIII) What is Los Angels abrasion test?
(IX) What is ca onic emulsions ?
(X) What is the other name for the hinged joints?
(XI) What is geo synthe c materials?
(XII) What is crushing strength test ?

Group-B (Short Answer Type Ques on)


Answer any three of the following : [ 5 x 3 = 15 ]
2. Describe how impact value of aggregate is found in laboratory. [5]
3. Briefly explain the mechanical proper es of bitumen. [5]
4. Write short notes on IRC specifica on for construc on of concrete roads. [5]
5. Briefly explain the applicability of polymer based waste products in different layers of pavement. [5]
6. Enumerate the different laboratory and in-situ procedures for evalua ng the mechanical proper es of [5]
soils for pavement construc on.

Group-C (Long Answer Type Ques on)


Answer any three of the following : [ 15 x 3 = 45 ]
7. Briefly explain the mechanism of stripping of bituminous binder. [ 15 ]
8. Men on the specifica ons and method of cement concrete pavement construc on. [ 15 ]
9. Briefly explain the applicability of polymer based waste products in different layers of pavement. [ 15 ]
10. Explain the material specifica on for water bound macadam road. [ 15 ]
11. Explain the social, economic and environmental issues of material uses in road construc on. [ 15 ]

*** END OF PAPER ***

1/1

You might also like