Service Manual

Model #: VIZIO VX52L

FHDTV10A_Samsung

V, Inc
320A Kalmus Drive Costa Mesa, CA 92626
TEL : +714-668-0588 FAX :+714-668-9099

Top Confidential
 Table of Contents

CONTENTS PAGE

Sections

1. Features 1-1

2. Specifications 2-1

3. On Screen Display 3-1

4. Factory Preset Timings 4-1

5. Pin Assignment 5-1

6. Main Board I/O Connections 6-1

7. Theory of Circuit Operation 7-1

8. Waveforms 8-1

9. Trouble Shooting 9-1

10. Block Diagram 10-1

11. Spare parts list 11-1

12. Complete Parts List 12-1

Appendix
1. Main Board Circuit Diagram

2. Main Board PCB Layout

3. Assembly Explosion Drawing

Block Diagram

VIZIO VX52L FHDTV10A_Samsung Service Manual

VINC Service Manual
VIZIO VX52L FHDTV10A_Samsung

COPYRIGHT © 2000 V, INC. ALL RIGHTS RESERVED.

IBM and IBM products are registered trademarks of International Business Machines
Corporation.

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

VINC and VINC products are registered trademarks of V, Inc.

VESA, EDID, DPMS and DDC are registered trademarks of Video Electronics Standards
Association (VESA).

Energy Star is a registered trademark of the US Environmental Protection Agency (EPA).

No part of this document may be copied, reproduced or transmitted by any means for any
purpose without prior written permission from VINC.

FCC INFORMATION
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that the interference will not occur in a particular installation. If this equipment
does cause unacceptable interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures -- reorient or relocate the receiving
antenna; increase the separation between equipment and receiver; or connect the into an
outlet on a circuit different from that to which the receiver is connected.

FCC WARNING
To assure continued FCC compliance, the user must use a grounded power supply cord and
the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to Amtrak products will void the user’s authority to operate this
device. Thus VINC Will not be held responsible for the product and its safety.

CE CERTIFICATION
This device complies with the requirements of the EEC directive 89/336/EEC with regard to
“Electromagnetic compatibility.”

SAFETY CAUTION
Use a power cable that is properly grounded. Always use the AC cords as follows – USA (UL);
Canada (CSA); Germany (VDE); Switzerland (SEV); Britain (BASEC/BS); Japan (Electric
Appliance Control Act); or an AC cord that meets the local safety standards.

VIZIO VX52L FHDTV10A_Samsung Service Manual

Chapter 1 Features
1. Built in TV channel selector for TV viewing

2. Simulatnueous display of PC and TV images

3. Connectable to PC’s analog RGB port

4. Built in S-video, HDTV, composite video, HDMI and TV out

5. Built in auto adjust function for automatic adjument of screen display

6. High quality 1920X1080 pixel by pixel display.

7. Smoothing function enables display of smooth texts and graphics even if

image with resolution lower than 1920X1080 is magnified

8. Advanced video functions for personal favor.

9. Picture In Picture (PIP) funtion to show TV or VCR images

10. Power saving to reduce consumption power too less than 3W

11. On Screen Display: user can define display mode (i.e. color, brightness,
contrast, sharpness, backlight), sound setting, PIP, TV channel program,
aspect and gamma or reset all setting.

CONFIDENTIAL – DO NOT COPY Page 1-1

File No. SG-0259
Chapter 2 Specification
1. TFT-LCD CHARACTERISTICS
Model Name: Samsung 52” – LTA520HB03
Display Size: 52 inches diagonal
Outline Dimension:1226.0 mm (H) x 719.2 mm (V) x 58.5 mm (D) (Typ.)
Pixel Pitch: 0.6mm x 0.6mm
Pixel Format: 1920 horiz. By 1080 vert. Pixels RGB strip arrangement
Display Operating Mode: Normally Black
Surface Treatment: Haze 44% , AG(4H , Anti_Glare)

2. TFT-LCD OPTICAL CHARACTERISTICS

Contrast ratio: CR : 2000(Typ)
Surface Luminance, White: 500 cd/m2 (Typ)
Response Time = 8 ms(Max=16ms)
Viewing Angle (CR>10)
Left: 89°typ.
Right: 89°typ.
Top: 89°typ.
Bottom: 89°typ.

3. Input Connectors
RJ11, D-SUB15PIN (MINI, 3rows), HDMIX3, RCAX2 (component), RCAX2
(AUDIO in), RCAX2 (composite), RCAX2 (AUDIO in), S-Video, Tuner , Line -
out , SPDIF

4. POWER SUPPLY
Input Voltage Level: 100~240 Vac, 50/ 60 Hz
Power Consumption: 400W MAX
Power OFF: to less than 3W MAX

5. Speaker
Output 10W (max) X2

CONFIDENTIAL – DO NOT COPY Page 2-1

File No. SG-0259
6. ENVIRONMENT
Operating Temperature: 0c~40c (Ambient)
Operating Humidity: Ta= 39 °C, 90%RH (Non-condensing)
Operating Altitude: 0 - 14,000 feet (4267.2m)(Non-Operating)

7. DIMENSIONS (Physical dimension)

Dimensions with stand：
1266mm(W) x 868.1mm(H)
Dimension without stand：
1266mm(W) x 836.7mm(H) x 117mm(D) inches

8. WEIGHT (Physical weight)

Net: 39+/- 0.5 kgs
Gross: 48+/- 1.0 kgs

Precaution
Please pay attention to the followings when you use this TFT LCD module.
1. OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower
than following voltage : V=±200mV(Over and under shoot voltage) .

(2) Response time depends on the temperature. (In lower temperature, it

becomes longer.)

(3) Brightness depends on the temperature. (In lower temperature, it becomes

lower.)And in lower temperature, response time (required time that
brightness is stable after turned on) becomes longer.

(4) Be careful for condensation at sudden temperature change. Condensation

makes damage to polarizer or electrical contacted parts. And after fading
condensation, smear or spot will occur.

(5) When fixed patterns are displayed for a long time, remnant image is likely
to occur.

CONFIDENTIAL – DO NOT COPY Page 2-2

File No. SG-0259
(6) Module has high frequency circuits. System manufacturers shall do
sufficient suppression to the electromagnetic interference. Grounding and
shielding methods may be important to minimize the interference.

(7) please do not give any mechanical and/or acoustical impact to LCM .
Otherwise , LCM can’t be operated it’s full characteristics perfectly.

(8) A screw which is fastened up the steel should be a amchine screw.

(if not , it causes metallic foreign material and deal LCM a fatal blow).

(9) Please do not set LCD on its edge.

2. HANDLING PRECAUTIONS FOR PROTECTION

(1) The protection film is attached to the bezel with a small masking tape.
When the protection film is peeled off, static electricity is generated
between the film and polarizer. This should be peeled off slowly and
carefully by people who are electrically grounded and with well ion-blown
equipment or in such a condition, etc.

(2) When the module with protection film attached is stored for a long time,
sometimes there remains a very small amount of glue still on the bezel after
the protection film is peeled off.

(3) You can remove the glue easily. When the glue remains on the bezel
surface or its vestige is recognized, please wipe them off with absorbent
cotton waste or other soft material like chamois soaked with
normal-hexane.

CONFIDENTIAL – DO NOT COPY Page 2-3

File No. SG-0259
Chapter 3 On Screen Display
On Screen Display (OSD) is a friendly interface providing the function adjusting in our system.
Customers could operate it only by few buttons. There is the introduction of the OSD.

Main unit button

MENU OK
CH ▲ ↑
CH ▼ ↓
VOL + ←
VOL - →
Input

[MENU]
“MENU” button could star the OSD which could adjust the performance and set up the setting
between the different input sources. There are the structures.
TV Source

CONFIDENTIAL – DO NOT COPY Page 3-1

File No. SG-0259
 A. Picture：(Bold: Default)
a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
i. Advanced Video
1. DNC (Low/Medium/Strong/Off)
2. Black level extender (Off/On)
3. White Peak Limiter (On/Off)
4. CTI (Low/Medium/Strong/Off)
5. Flesh Tone (Off/On)
6. Adaptive Luma (Off/On)
7. DCR (Off/On)
B. Audio：(Bold: Default)

CONFIDENTIAL – DO NOT COPY Page 3-2

File No. SG-0259
 a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)

C. TV：(Bold: Default)

a. Tuner Mode (Cable/Air)

b. Auto Search
c. Skip Channel
d. Digital Audio Out (PCM/Dolby Digital/OFF)
e. Time Zone (Eastern/Indiana/Central/Mountain/Arizona/Pacific/Alaska/Hawaii)
f. DAYLIGHT SAVING (ON, OFF)

CONFIDENTIAL – DO NOT COPY Page 3-3

File No. SG-0259
 D. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
f. PIP
1. Style (OFF/PIP/POP)
2. Input (TV, AV1, AV2, COMPONENT1, COMPONENT2, RGB, HDMI1, HDMI2)
3. Size (Small/Medium/Large)
4. Position(Bottom Right, Bottom Center, Bottom Left, Middle Left, Top Left,
Top Center, Top Right, Middle Right)
g. H/V Position
1. H. Position (0~64, 32)
2. V. Position (0~32, 16)
3. V. size (0~100, 20)
h. Rest All Setting (OK/Cancel)

CONFIDENTIAL – DO NOT COPY Page 3-4

File No. SG-0259
 E. Parental：(Bold: Default)

Password (Default => 0000)

a. Cannel Block
b. TV Rating
c. Move Rating
d. Block Unrated TV (NO/Yes)
e. Access Code Edit

CONFIDENTIAL – DO NOT COPY Page 3-5

File No. SG-0259
 捷徑 - Show Desktop.lnk

CONFIDENTIAL – DO NOT COPY Page 3-6

File No. SG-0259
RGB Mode
A. Picture Adjust：(Bold: Default)

a. Auto Adjust
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color Temperature (6500/9300/Custom)
f. H-Size (0~255, 127)
g. H-Position (0~100, 65)
h. V-Position (0~100, 49)
i. Fine Tune (0~31, 17)

CONFIDENTIAL – DO NOT COPY Page 3-7

File No. SG-0259
 B. Audio：(Bold: Default)

a. Volume (0~100, 25)

b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)

C. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)

CONFIDENTIAL – DO NOT COPY Page 3-8

File No. SG-0259
 8. Window Opacity (Solid/Translucent/Transparent)
f. PIP
1. Style (OFF/PIP/POP)
2. Input (TV, AV1, AV2, COMPONENT1, COMPONENT2, RGB, HDMI1, HDMI2)
3. Size (Small/Medium/Large)
4. Position(Bottom Right, Bottom Center, Bottom Left, Middle Left, Top Left,
Top Center, Top Right, Middle Right)
g. H/V Position
1. H. Position (0~64, 32)
2. V. Position (0~32, 16)
3. V. size (0~100, 20)
h. Rest All Setting (OK/Cancel)

AV / COMPONENT MODE
A. Picture：(Bold: Default)

CONFIDENTIAL – DO NOT COPY Page 3-9

File No. SG-0259
 a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
i. Advanced Video
1. DNC (Low/Medium/Strong/Off)
2. Black level extender (Off/On)
3. White Peak Limiter (On/Off)
4. CTI (Low/Medium/Strong/Off)
5. Flesh Tone (Off/On)
6. Adaptive Luma (Off/On)
7. DCR (Off/On)

B. Audio：(Bold: Default)

CONFIDENTIAL – DO NOT COPY Page 3-10

File No. SG-0259
 a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)

C. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
f. PIP
1. Style (OFF/PIP/POP)
2. Input (TV, AV1, AV2, COMPONENT1, COMPONENT2, RGB, HDMI1, HDMI2)
3. Size (Small/Medium/Large)
4. Position(Bottom Right, Bottom Center, Bottom Left, Middle Left, Top Left,
Top Center, Top Right, Middle Right)
g. H/V Position
1. H. Position (0~64, 32)
2. V. Position (0~32, 16)
3. V. size (0~100, 20)
h. Rest All Setting (OK/Cancel)

CONFIDENTIAL – DO NOT COPY Page 3-11

File No. SG-0259
 D. Parental：(Bold: Default)

Password (Default => 0000)

a. Cannel Block
b. TV Rating
c. Move Rating
d. Block Unrated TV (NO/Yes)
e. Access Code Edit

HDMI MODE
A. Picture：(Bold: Default)

CONFIDENTIAL – DO NOT COPY Page 3-12

File No. SG-0259
 a. Picture Mode (Standard/Movie /Game / Custom)
b. Backlight (0~100, 90)
c. Contrast (0~100, 50)
d. Brightness (0~100, 50)
e. Color (saturation)(0~100, 50)
f. Tint (hue) (-32~32, 0)
g. Sharpness (0~7, 4)
h. Color Temperature (Cool/Normal/Warm/Custom)
i. Advanced Video
1. DNC (Low/Medium/Strong/Off)
2. Black level extender (Off/On)
3. White Peak Limiter (On/Off)
4. CTI (Low/Medium/Strong/Off)
5. Flesh Tone (Off/On)
6. Adaptive Luma (Off/On)
7. DCR (Off/On)
B. Audio：(Bold: Default)

CONFIDENTIAL – DO NOT COPY Page 3-13

File No. SG-0259
 a. Volume (0~100, 25)
b. Bass (0~100, 50)
c. Treble (0~100, 50)
d. Balance (-50~50, 0)
e. Surround (ON/OFF)
f. Speakers (ON/OFF)

C. Setup：(Bold: Default)
a. Language (English/ Français / Espaňol)
b. Sleep Timer (OFF/30Min/60Min/90Min/120Min)
c. Analog CC (OFF/CC1~4/TT1~4)
d. Digital CC (OFF/CC1~4/Service1~6)
e. Digital CC Style
1. Caption Style (As Broadcaster/Custom)
2. Size (Large/Small/Medium)
3. Font Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
4. Font Opacity (Solid/Translucent/Transparent)
5. Background Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
6. Background Opacity (Solid/Translucent/Transparent)
7. Window Color (White/Green/Blue/Red/Cyan/Yellow/Magenta/Black)
8. Window Opacity (Solid/Translucent/Transparent)
f. PIP
1. Style (OFF/PIP/POP)
2. Input (TV, AV1, AV2, COMPONENT1, COMPONENT2, RGB, HDMI1, HDMI2)
3. Size (Small/Medium/Large)
4. Position(Bottom Right, Bottom Center, Bottom Left, Middle Left, Top Left,
Top Center, Top Right, Middle Right)
g. H/V Position
1. H. Position (0~64, 32)
2. V. Position (0~32, 16)
3. V. size (0~100, 20)
h. Rest All Setting (OK/Cancel)

CONFIDENTIAL – DO NOT COPY Page 3-14

File No. SG-0259
[INPUT]
“INPUT” could supply an interface providing a list. The list shows input sources and
provides the choices of different sources. The list includes items as below:

A. TV: Analog TV or digital TV

B. AV1, AV2: Composite (AV) signal
C. Component1, Component2: Color difference (YPbPr) video signals.
D. RGB: Video Graphics Array (VGA) or D-sub video signals.
E. HDMI1, HDMI2, HDMI3, HDMI4: High Definition Multimedia Interface (HDMI)
multimedia signals.
Note： The list of PIP provides the choices of different sources on sub-screen.

[INFO]
“INFO” button could show an information bar which displays the information about the
input signal on our LCD TV.

CONFIDENTIAL – DO NOT COPY Page 3-15

File No. SG-0259
Chapter 9 Trouble shooting
MONITOR DISPLAY NOTHING (PC MODE)

Start

N0
1. Is Power board output
+5V(F2)?
LED is lighted
2. Is J1 connector good?
(Orange) 3. Is DC-DC OK?
4. Is U8 pin2 (3.3V) working ok?

Yes

It is in power saving
N0 1. Check video cable
LED is lighting? 2. Is the timing supported?
3. Check sync input
4. Check VGASOG rout if analog
(SOG) (C88)

Yes

N0

Is backlight on? 1.Check J1 PIN 13 (5V)

2.Is inverter ok?
3.Is Power Board ok?

Yes
Yes
N0 It means data to LVDS
1. Is J7 connecting OK?
U14 has no data 2. Check J1 +5V (F2) & +12V (F1)
3. Is panel ok?
4. Check P3 D-sub Input correct
out? 5. Check analog input route

Yes

END

CONFIDENTIAL – DO NOT COPY Page 9-1

File No. SG-0259
(TV, COMPOSITE VIDEO1, 2, S-VIDEO) IS NOT DISPLAY CORRECTLY

Start

N0

Input signal good? 1. Check video

2. Check DVD player

Yes
1.Check signal between signal
N0
P11& J4 to U14 (IF AV1&AV2
mode)
2. Check Tuner & U14 (IF TV mode)
U14 input correct? 3. Check J4 (IF S-Video)
4. Check U14 POWER +3.3V

Yes

N0

1.Check LVDS LINE

2.Check U32 power
LVDS output correct?

Yes

1.Chcak J5 Connect is good?

2.Is panel working ok?

Yes

END

CONFIDENTIAL – DO NOT COPY Page 9-2

File No. SG-0259
(COMPONENT1, 2) IS NOT DISPLAY CORRECTLY

Start

N0

Is input signal good? 1. Check video

2. Check host’s setting

Yes
N0

1. Check signal from P1

Is P1 input correct?
2. Check system power 12V& 5v

Yes

N0

Is U14 input correct? 1. Check signal between U14&P1

2. Check X1 Clock (27MHZ)

Yes
N0

Is LVDS output 1. Check U14

2. Check U14 power 3.3V&2.6v&1.2v
correct ?

Yes

1 .Is J7 connected good?

2. Is panel working ok?

Yes

END

CONFIDENTIAL – DO NOT COPY Page 9-3

File No. SG-0259
(HDMI) IS NOT DISPLAY CORRECTLY

start

NO 1. check video
Input signal good? 2. check host’s setting

YES
NO 1. check P6&P7 connect
U22 no date out? 2. check the pin18& pin19of P6&P7
3. check the pin6 of U23&U25

YES
1. check P12& P13 connect
NO
2. check the pin18& pin19 of P12 &
U39 no date out?
P13
3. check the Pin6 of U36 &U37

YES

NO 1. check U14 power

U14 pin 2. check between signal U14 and U22
connect? 3. check U14 clock 27MHZ

YES

1. Is J7 connect good ?
2. IS panel working ok?

END

CONFIDENTIAL – DO NOT COPY Page 9-4

File No. SG-0259
TROUBLE OF DC-DC CONVERTER

Start

N0
The voltage is about + 5V
1. Check power board
J1 PIN 9 10,11,
2. Check power cable, F2 & connection J1
3. Check U8 pin1 (+5V) & pin2 (+3.3V)

Yes
N0
The voltage is about + 12V while power switch on
J1 PIN 2,3,4,5 1. Is J1 connection good
2. Check J1 Pin1 is up to about 3.3V?
3. Check power board
4. Check F1
Yes
N0
The voltage is about +5V while power switch on
U1 pin 5 6 7 8 1. Check F2 & U1
2. Check OPWRSB (R20)
3. Check U1 pin1&2 or pin 3&4, should have -1V more.

Yes
N0
The voltage is about +3.3V
U2, U8 & U33 pin2 1. Check F2 & U1
2. Check U2, U4 & U33

Yes
N0
The voltage is about +1.6V
CE15 pin 1 1. Check F2 & U1
2. Check U6

Yes N0

The voltage is about +1.2V while power switch on

L7 pin2 1. Check F2 & U1
2. Check U5

Yes
N0
The voltage is about +2.6V while power switch on
U10 pin2 1.Check J1 Connect
2.Check U10

Yes
N0
The voltage is about +12V to +5V(for Tuner)while power
U3 pin1 & pin3 switch on
1. Check F1
2. Check U3 pin1 (+12V) & U3 pin3 (+5V)
Yes

END

CONFIDENTIAL – DO NOT COPY Page 9-5

File No. SG-0259
TROUBLE OF EDID READING

Start

N0 Support DDC1/2B
1. Analog cable ok?
Is Analog DDC OK? 2 .Check signal (U21 to P3)
3. Check U21 Voltage
4. Is protocol compliant?

Yes

Support DDC1/2B
1. Analog cable ok?
N0
2. Check signal (U23 to P6)
Is HDMI DDC OK? 3. Check signal (U25 to P7)
4. Check singal (U36 to P12)
5. Check singal (U37 to P13)
6. Is protocol compliant?
Yes

END

CONFIDENTIAL – DO NOT COPY Page 9-6

File No. SG-0259