DGH341X

Design & Manufacture Standard:

Design Standard: Q/12 OTS001-2020

Flanged Combination Valve Face-to-Face: GB/T 12221-2005

Pressure Testing: Q/12 OTS001-2020

Butterfly valve& Strainer & Check Valve

Suitable temperature Suitable Medium

Nominal size Nominal pressure
Water, sea water, gas and
other non-corrosive medium
Functions and Uses
Combination valve:has all the functions of butterfly valve,strainer,check valve.Save materials and installation

space.Online operation reliably,dismantling quickly and clean easily with little water-loss.

Technical
parameters
Medium
Main Parts Water Sea water

Body Ductile iron/WCB /SS Copper alloy/ Duplex stainless steel

Disc/Strainer/flap/hinger SS Duplex stainless steel /Copper alloy

Seat NBR/EPDM/VITON.etc. NBR/EPDM/VITON.etc.

Suitable temperature -20-80℃ -20-100℃ -10-180℃ -20-80℃ -20-100℃ -10-180℃
Main Parts and Materials:

No Part name Material No Part name Material

1 Body QT450-10 12 Seal ring NBR
2 Seat EPDM/NBR/VITON 13 Guide sleeve CF8
3 Stem 20Cr13 14 check valve flap CF8
4 Disc CF8 15 sealing gasket EPDM
5 Seal ring EPDM 16 Pressure sensor Composite member
6 Bolts 304 17 Stem 06Cr19Ni10
7 Spring Washer 304 18 Spring 0Cr17Ni7Al
8 Gasket 304 19 Drain plug 06Cr19Ni10

9 Gear/Pneumatic/Electric Composite member 20 Mesh 06Cr19Ni10

10 Filter bonnet QT450-10 21 Bolts 304

11 Seal ring NBR 22 Name plate 304

Data size:
DH341X
Design & Manufacture Standard:
Connection Size: JIS B2220
Combination Valve

Butterfly valve& Check Valve

DN40~DN150 10k/20k -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The combination valve has the function of cutting off and non-return, with the advantage of compact structure, saving
the installation space and raw material, operating reliably, a little water loss, with the function of cutting off before and
after itself.

Technical parameters
Medium
Main Parts Water Sea water

Body Ductile iron/WCB /SS Copper alloy/ Duplex stainless steel

Disc/Strainer/flap/hinger SS Duplex stainless steel /Copper alloy

Seat NBR/EPDM/VITON.etc. NBR/EPDM/VITON.etc.

Suitable temperature -20-80℃ -20-100℃ -10-180℃ -20-80℃ -20-100℃ -10-180℃
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 8 Lever
2 Stem SS420 9 Exhaust valve STS304+Copper
3 Seat EPDM/NBR/VITON 10 Bolts Copper
4 Disc CF8/CF8M 11 Check valve SS304
5 O ring NBR 12 Spring SS304
6 Gasket Steel 13 Gear
7 Bolts 4.8

Data size:
DG341X
Design & Manufacture Standard:
Connection Size: JIS B2220
Combination Valve

Butterfly valve& Strainer

DN40~DN150 10k/20k -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The combination valve has the functions of cutting off and filter, also has the advantage of compact structure, saving
the installation space and raw material, operating reliably and online operation, washing the strainer mesh easily, a
little water loss. Not only it has the function of filtering, but also has the function of cutting off before and after itself.

Technical parameters
Medium
Main Parts Water Sea water

Body Ductile iron/WCB /SS Copper alloy/ Duplex stainless steel

Disc/Strainer/flap/hinger SS Duplex stainless steel /Copper alloy

Seat NBR/EPDM/VITON.etc. NBR/EPDM/VITON.etc.

Suitable temperature -20-80℃ -20-100℃ -10-180℃ -20-80℃ -20-100℃ -10-180℃
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 7 Bolts 4.8
2 Stem SS420 8 Lever
3 Seat EPDM/NBR/VITON 9 Drain plug Copper
4 Disc CF8/CF8M 10 Mesh SS304
5 O ring NBR 11 Gear
6 Gasket Steel

Data size:
D342X
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: GB/T 17241.6
Pressure Testing: GB/T 13927

Double Eccentric Flanged Valve

DN200~DN2000 10bar/16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The effect of double eccentricity makes the disc can quickly away from the seat once valve is opened, greatly reducing
the unnecessary excessive squeeze and scraping of the disc and the seat, reducing the open resistance distance,
reducing the wear and tear, improving the life of the seat.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc Ductile iron/WCB

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:
No Part name Material No Part name Material No Part name Material

1 Body GGG40 13 Gland packing NBR 25 Washer 8.8

2 Below shaft SS420 14 Stud 8.8 26 Washer 8.8

3 Seal ring EPDM 15 Washer 8.8 27 Washer 8.8

4 Washer SS304 16 Washer 8.8 28 Nut 8.8

5 Bolt SS304 17 Pin 45# 29 Shaft

6 Nut SS304 18 Gear box 30 Cover GGG40

7 Disc GGG40 19 Yoke GGG40 31 Bolt 8.8

8 Pin SS420 20 Nuts 8.8 32 Washer 8.8

9 Upper shaft SS420 21 Washer 8.8 33 Washer 8.8

10 O ring NBR 22 Washer 8.8 34 Glandb bush Copper

11 Gland bush Copper 23 Bolt 8.8 35 O ring NBR

12 Packing gland GGG40 24 Nut 8.8 36 Seat SS304/SS316

Data size:
LTD71X-Fig1902 DN50-600
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Lug Butterfly Valve

DN50~DN600 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The disc of concentric wafer type lug butterfly valve is installed in the diameter direction of the pipeline. In the
cylindrical channel of the valve body, the disc rotates around the axis, and the rotation angle is between 0°~ 90°.
When it rotates to 90°, the valve is fully open. Valve is widely used, so the same valve will be have different
collocation according to different occasions and working conditions.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

NO Part name Material NO Part name Material

1 Body GGG40 4 Disc CF8/C954/CF8M

2 Gland bush SF-1 5 Seat EPDM/NBR

3 Shaft SS420 6 Gland bush SF-1

Data size:
D71X Fig.1903 DN50-600
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Butterfly Valve

DN50~DN600 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The structure feature of Concentric Wafer Type Butterfly Valve is that the stem axis, the disc center and the body center
are in the same position. With simple structure and convenient in manufacturing, it is widely used in water supply and
drainage, sewage treatment, central air conditioning, heating, chemical, Marine, paper making, food industry and other
fields, also is the preferred valve product for users.

Technical parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating, sewage,
Main Parts chemical industry, paper making, Marine, food industry, etc

Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

NO Part name Material NO Part name Material

1 Body GGG40 4 Disc CF8/C954/CF8M

2 Gland bush SF-1 5 Seat EPDM/NBR

3 Shaft SS420 6 Gland bush SF-1

Data size:
D71X Fig. 1801
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Butterfly Valve

DN50~DN300 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
The opening and closing part of butterfly valve use a disc in the body around its own axis rotation, so as to achieve the
purpose of opening and closing or adjustment. Butterfly valve can be used to control the flow of air, water, steam, a
variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid.It is mainly used to cut
off and throttle the flow in the pipeline.

Technical parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating, sewage,
Main Parts chemical industry, paper making, Marine, food industry, etc

Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

NO Part name Material NO Part name Material

1 Body GGG40 4 Seat EPDM/NBR/VITON

2 Disc CF8/C954/CF8M/DI 5 Bushing PTFE

3 Shaft SF-1 6 SEAL ring NBR/EPDM

Data size:
D71X Fig.1802 DN50-300
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Butterfly Valve

DN50~DN300 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
This kind of butterfly valve absorbs the advantages of overseas butterfly valve products, has special structure design,
exquisite processing technology, make the product performance safe and reliable, improve the service life of the
product greatly. It is widely used in water supply and drainage, sewage treatment, central air conditioning, heating,
chemical, Marine, paper making, food industry and other fields, also is the preferred valve product for users.

Technical parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating, sewage,
Main Parts chemical industry, paper making, Marine, food industry, etc

Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 6 Gland bush SF-1

2 Gland bush SF-1 7 Gland bush PTFE

3 Seat EPDM/NBR 8 O ring O ring

4 Disc CF8/CF8M/C954 9 Pin Steel

5 Shaft SS420 10

Data size:
D371X Fig.1802 DN350-600
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Semi-lug Butterfly Valve

DN350~DN600 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
This kind of high performance wafer type butterfly valve absorbs the advantages of overseas butterfly valve products,
has special structure design, exquisite processing technology, make the product performance safe and reliable,
improve the service life of the product greatly. It is widely used in water supply and drainage, sewage treatment, central
air conditioning, heating, chemical, Marine, paper making, food industry and other fields, also is the preferred valve
product for users.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material Part name Material

1 Bottom cover GGG40 7 Seat EPDM/NBR

2 Body GGG40 8 Gland bush SF-1

3 Below shaft SS431 9 Pin SS304

4 Shaft Steel 10 Sealing sleeve nylon

5 Disc CF8/CF8M/C958 11 Seal ring EPDM

6 Upper shaft SS431

Data size:
D71X Fig.1701 DN50-300
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN6/PN10/PN16/5K/10K/CLASS150
Pressure Testing: GB/T 13927

Concentric Wafer Type Butterfly Valve

DN50~DN300 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
Rubber seat butterfly valve, as a component used to pipe system cutting and flow control, has been widely used in
many fields such as petroleum, chemical industry, metallurgy, water & electricity and so on. The butterfly disc of the
soft seal butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the valve body,
the disc rotates around the axis, and the rotation angle is between 0°~ 90°. When it rotates to 90°, the valve is fully
open.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 4 Seat EPDM/NBR

2 Disc CF8/CF8M/C958 5 Gland bush PTFE

3 Shaft SS420 6 O ring NBR

Data size:
D41X
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Connection Size: PN10/PN16/CLASS150
Pressure Testing: GB/T 13927

Double Flanged Butterfly Valve

DN50~DN2200 16bar -20~100°C Water, sea water, gas and

other non-corrosive medium
Functions and Uses
Concentric Flanged butterfly valve is used for pipeline water supply and drainage, gas pipeline regulated flow and
closed the medium. As long as the rotation of 90°, you can close quickly, and operate easily. In the cylindrical channel
of the valve body, the disc rotates around the axis, and the rotation angle is between 0°~ 90°. When it rotates to 90°,
the valve is fully open.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 4 Seat EPDM/NBR
2 Disc GGG40/CF8/CF8M 5 Gland bush PTFE/Copper
3 Shaft SS420 6 O ring NBR

Data size:
D81X
Design & Manufacture Standard:

Butterfly valve series Pressure Testing: GB/T 13927

Grooved Butterfly Valve

DN50~DN150 16bar -20~100°C Water, gas and

other non-corrosive medium
Functions and Uses
Grooved butterfly valve is used for conveying all kinds of corrosive and non-corrosive fluid media during pipeline
transmit system. used to regulate and cut off the flow of media. Groove butterfly valve should be installed reducer on
the stem, so that the butterfly disc can stop in any position, improve the operation of the valve.

Technical parameters
Medium/working
condition
Can be used in water supply and drainage, central air conditioning, fire line, Marine, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 8 O ring NBR

2 Shaft SS304 9 Gland bush PTFE

3 Gland bush PTFE 10 Gear box
4 Seat EPDM 11 Seal gasket NBR
5 Disc CF8 12 Nut 4.8
6 Gland bush PTFE 13 Washer 65M
7 Gland bush PTFE

Data size:
D343H
Design & Manufacture Standard:
Design Standard: GB/T 12238
Face-to-Face： GB/T 12221
Butterfly valve series Flange connection Size: GB/T 9113-9119
Pressure Testing: GB/T 13927-2008

Flanged Metal Seat Butterfly Valve

DN50~DN2200 PN10/PN16/ 0~420°C Water,oil,gas

PN25
Functions and Uses
This valve is used to cut off, connect, regulate the medium in the pipeline, has good performance in fluid control and close
sealing, is widely used in metallurgy, electric power, petroleum, chemical, air, gas, combustible gas and water supply and
drainage and other corrosive media pipeline. The valve‘s sealing use tri-eccentric structure, the sealing surface of the seat is
welded with stainless steel, the sealing ring of the disc is made of stainless steel, non-metal composite material. It reaches metal
seal structure, open with small torque, flexible and convenient. Valve sealing is reliable, high pressure resistance, corrosion
resistance, long service life, suitable for water, air, steam, gas, oil and acid, alkali, salt and other corrosive medium.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating,
Main Parts sewage, chemical industry, paper making, Marine, food industry, etc

Body Cast steel/SS.,etc.

Disc SS
Seat SS+graphite
Suitable temperature -29℃~425℃
Main Parts and Materials:

No Part name Material No Part name Material

1 Body Cast steel/SS 3 Seat Cast steel/SS

2 Disc Cast steel/SS 4 Gland bush WCB/NR/SS/PTFE

Data size:
H77X
Design & Manufacture Standard:
Design Standard: JB/T 8937
Face-to-Face： GB/T 12221
Check Valve Series Connection Size: PN10/PN16/CLASS150
Pressure Testing: GB/T 13927

Wafer Type Butterfly Check Valve (full lining)

DN50~DN300 16bar -20~100°C Water, seawater, gas and

other non-corrosive medium.
Functions and Uses
Butterfly check valve is used in pipeline in industry, environmental protection, water treatment, marine, high building
water supply and drainage, to prevent non-return of medium. This wafer type check valve has two semicircle disc, and
the spring is forced to return, the sealing surface can be used welded wear-resistant material or rubber lining. This
valve with good performance sealing is widely used.

Technical
parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, fire line, Marine, etc
Main Parts

Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 7 Lining EPDM/NBR/VITON

2 Damping ring SS304 8 Gasket PTFE

3 Disc CF8/CF8M/C958 9 Gasket PTFE
4 Stem SS420 10 Rubber plug EPDM
5 Spring 17-4PH 11 Nut SS304
6 Press cake CF8M 12 Hand ring SS304

Data size:
H77X
Design & Manufacture Standard:
Design Standard: JB/T 8937
Face-to-Face： GB/T 12221
Check Valve Series Connection Size: PN10/PN16/CLASS150
Pressure Testing: GB/T 13927

Wafer Type Butterfly Check Valve (Semi-lining)

DN50~DN300 16bar -20~100°C Water, seawater, gas and

other non-corrosive medium.
Functions and Uses
Butterfly check valve is used in pipeline in industry, environmental protection, water treatment, marine, high building
water supply and drainage, to prevent non-return of medium. This wafer type check valve has two semicircle disc, and
the spring is forced to return, the sealing surface can be used welded wear-resistant material or rubber lining. This
valve with good performance sealing is widely used.

Technical
parameters
Medium/working
condition
Can be used in water supply and drainage, central air conditioning, fire line, Marine, etc
Main Parts
Body Ductile iron/WCB/SS.,etc.

Disc SS/DSS/Copper Alloy

Seat NBR EPDM VITON

Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃

Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG40 7 Lining EPDM/NBR/VITON

2 Damping ring SS304 8 Gasket PTFE

3 Disc CF8/CF8M/C958 9 Gasket PTFE
4 Stem SS420 10 Rubber plug EPDM
5 Spring 17-4PH 11 Nut SS304
6 Press cake CF8M 12 Hand ring SS304

Data size:
H44
Design & Manufacture Standard:
Design Standard: GB/T 12235

Check Valve Series GB/T 12236

Testing Standard: GB/T 26480

Swing Check Valve

Functions and Uses
Swing check valve is also called check valve or non-return valve which function is to prevent the media backflow in
pipeline. Headstock piece of valve open and close by the media flow force, the valve which to prevent backflow is
called check valve. Check valve is an automatic valve, which is mainly used in the pipeline with single medium flow. It
only allows the medium to flow in one direction to prevent accidents. This kind of valve should be installed horizontally
in the pipeline.

Technical parameters
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG50 7 Nut galvanized

2 Seat HPb59-1/NBR 8 Hinge GGG50

3 Seal ring HPb59-1/NBR 9 Washer NBR
4 flap GGG50 10 Bonnet GGG50
5 Pin 2Cr13 11 Gasket galvanized
6 Insert Pin SS304 12 Screw galvanized

Data size:
HQ41X
Design & Manufacture Standard:
Design Standard: GB/T 12235

Check Valve Series GB/T 12236

Testing Standard: GB/T 26480

Ball Type Check Valve

Functions and Uses

Ball check valve is a kind of check valve with multi balls, multi channels and multi cone types backflow structure,
mainly composed of front and rear valve bodies, rubber balls and cone bodies. etc.

Technical parameters

Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating,
Main Parts sewage, chemical industry, paper making, Marine, food industry, etc

Body WCB / Ductile iron

Disc Ductile iron / EPDM

Main Parts and Materials:

No Part name Material No Part name Material

1 Body Ductile iron 5 Nut Stainless steel

2 Ball WCB/ Ductile iron +NBR 6 Gasket Stainless steel

3 O ring NBR 7 Gasket PTFE
4 Bonnet Ductile iron 8 Plug WCB

Data size:
H41X
Design & Manufacture Standard:
Design Standard: GB/T 12235

Check Valve Series GB/T 12236

Testing Standard: GB/T 26480

Vertical Check Valve

Functions and Uses
Silent check valve is mainly composed of valve body, valve seat, guide body, valve disc, bearing, spring and other main
parts. The internal flow channel adopts streamline design, with minimum pressure. The valve disc has a short opening
and closing time, and can be closed quickly when the pump is stopped to prevent huge water hammer. It has the
characteristics of silent closing. The valve is mainly used for water supply and drainage, fire protection and heating
system, which can be installed at the outlet of water pump to prevent the damage of backflow and water hammer to the
pump.

Technical parameters

Material Carbon Steel Austentic stainless steel

Main Parts

Body/Disc/Bonnet WCB CF8/CF8M

Seal 13Cr/STL Body material/STL

Stem Cr13 series CF8/CF8M

Main Parts and Materials:

Part name Gasket Nut Body Disc O ring Stem Spring Gland bush Bonnet

Ductile
Material WCB WCB Ductile iron NBR SS SS Brass Ductile iron
iron/EPDM

Data size:
HH46X/HH48X/HH49X
Design & Manufacture Standard:
Design Standard: GB/T 12235 GB/T 12236

Check Valve Series Flange Connection Standard: GB/T 17241.6

GB/T 9113
Face-to-Face：API594 API16D DIN3202 JB/T8937
Testing Standard: GB/T 26480 GB/T 13927 API598

Vertical Check Valve

 Technical parameters
Technical parameters
Material
Austentic
Nominal Diameter 40-1000mm
Carbon Steel Cast Steel
Main Parts stainless steel
Slowly-closing time 3-60s
Body/Disc/Bonnet WCB CF8/CF8M Ductile iron Design & Manufacture
API594, API6D,JB/T8937
Body Standard
Seal 13Cr/STL 13Cr/STL SNSIB16.34, DIN2401,
material/STL Pressure-temperature
GB/T9124, HG20604, HG20625,
Stem Cr13 series CF8/CF8M Cr13 series rating
SH3406, JB/T74
Main Parts and Materials:

Stem,Cylinder,
Part name Body Disc Spring Seat
Piston

Material Cast Iron / Cast steel Carbon steel Stainless steel Stainless steel NBR

Data size:
H74W/H/Y
Design & Manufacture Standard:
Design Standard: GB/T 12235

Check Valve Series GB/T 12236

Testing Standard: GB/T 26480

Single Disc Check Valve

Functions and Uses
Function and application of single disc check valve: small volume, light weight and low water hammer pressure.
Sensitive movement and high performance sealing. The valve disc has short stroke and small closing impulse. The
whole structure is simple and beautiful. Long service life, high reliability, can be applied to a variety of working
conditions.

Technical parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating,
Main Parts sewage, chemical industry, paper making, Marine, food industry, etc

Body Cast steel / SS

Disc Cast steel / SS
Seat NBR EPDM VITON
Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃
Data size:
Z45
Design & Manufacture Standard:
Design Standard: GB/T 12234

Gate Valve Series Testing Standard: GB/T 26480

Non-rising Stem Gate Valve

Functions and Uses
Rubber seal gate valve is the loan repayment product of traditional gate valve, which uses the compensation effect of
slight deformation produced by elastic gate to achieve good sealing effect, the valve has the advantages of integral
coating, corrosion resistance, not easy to break, good elastic memory and long service life. It can be widely used in
water, sewage, construction, food, electric power, medicine, metallurgy, textile, energy systems and other fluid
pipelines as regulating and throttling devices.

Technical parameters

Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron / WCB /CF8 ,CF8M
Disc 201 / 304 / 316
Seat NBR EPDM VITON
Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃
Main Parts and Materials:

NO Part name Material No Part name Material

1 Body GGG50 7 Hand wheel GGG50
2 Disc GGG50+EPDM/NBR 8 Scraper seal EPDM
3 Stem nut HPb59-1 9 Locking nut HPb59-1
4 Stem 2Cr13 10 Seal ring PTFE
5 Gasket EPDM 11 O ring EPDM
6 Bonnet GGG50 12 Locating ring HPb59-1

Data size:
Z41
Design & Manufacture Standard:
Design Standard: GB/T 12234

Gate Valve Series Testing Standard: GB/T 26480

Rising Stem Gate Valve

Functions and Uses
Rubber seal gate valve is the loan repayment product of traditional gate valve, which uses the compensation effect of
slight deformation produced by elastic gate to achieve good sealing effect, the valve has the advantages of integral
coating, corrosion resistance, not easy to break, good elastic memory and long service life. It can be widely used in
water, sewage, construction, food, electric power, medicine, metallurgy, textile, energy systems and other fluid
pipelines as regulating and throttling devices.

Technical parameters
Medium/working
condition Can be used in water supply and drainage, central air conditioning, heating, sewage,
chemical industry, paper making, Marine, food industry, etc
Main Parts
Body Ductile iron / WCB /CF8 ,CF8M
Disc 201 / 304 / 316
Seat NBR EPDM VITON
Suitable temperature -20℃~80℃ -20℃~100℃ -10℃~180℃
Main Parts and Materials:

NO Part name Material No Part name Material

1 Body GGG50 8 Packing Graphite
2 Disc GGG50+EPDM/NBR 9 Yoke GGG50
3 Stem nut HPb59-1 10 Press cake GGG50
4 Gasket EPDM 11 Nut HPb59-1
5 Stem 2Cr13 12 Thrust bearing Carbon steel
6 Locating pin SS 13 Hand wheel GGG50
7 Bonnet GGG50 14 Gland nut 40Cr

Data size:
Z73X
Design & Manufacture Standard:

Gate Valve Series Seal test pressure: : JB/T 9092

Manual Knife Gate Valve

Functions and Uses
Rubber seal gate valve is the loan repayment product of traditional gate valve, which uses the compensation effect of
slight deformation produced by elastic gate to achieve good sealing effect, the valve has the advantages of integral
coating, corrosion resistance, not easy to break, good elastic memory and long service life. It can be widely used in
water, sewage, construction, food, electric power, medicine, metallurgy, textile, energy systems and other fluid
pipelines as regulating and throttling devices.

Technical parameters
Medium/working condition
Can be used in water supply and drainage, central air conditioning, heating,
Main Parts sewage, chemical industry, paper making, Marine, food industry, etc

Body Ductile iron / WCB

Gate Ductile iron + Rubber
Seal 13Cr/STL
Stem Cr13 series/CF8,CF8M
Main Parts and Materials:

Part name Body, Bonnet Gate Stem Seal

Material Ductile iron/ Cast Iron WCB / SS SS NBR

Data size:
GL41
Design & Manufacture Standard:
Design Standard: GB/T 913

Filter Series Testing Standard: GB/T 13927

Y Strainer
Functions and Uses
Y-type Strainer belongs to pipeline coarse filter, which can be used for filtering liquid, gas or large particles of other media. It can remove large
solid impurities in the fluid when installed on the pipeline, so that the machinery and equipment (including compressor, pump, etc.) can work
and operate normally, so as to stabilize the process and ensure the safety in production. When the fluid enters the filter cartridge with a certain
size of filter screen, its impurities are blocked, and the clean filtrate is discharged from the outlet of the filter. When cleaning is needed, the
detachable filter cartridge can be taken out and re loaded after treatment, so the use and maintenance is convenient.
Weak corrosive materials in chemical and petrochemical production, such as water, ammonia, oil, hydrocarbon, etc.
Corrosive materials in chemical production, such as caustic soda, concentrated and dilute sulfuric acid, carbonic acid, acetic acid, acid, etc.
Low temperature materials in refrigeration, such as liquid methane, liquid ammonia, liquid oxygen and various refrigerants.
Materials with hygienic requirements in light industry, food and pharmaceutical production, such as beer, beverage, dairy products, medical
supplies, etc.

Technical parameters

Main Parts Body Bonnet Mesh Gasket

Material
SY41-16C WCB WCB 304

SY41-16P CF8 CF8 304 PTFE/Stainless steel

and graphit spiral wound
SY41-16R CF8M CF8M 316

SY41-16Q Ductile iron Ductile iron 304 Rubber seal

Main Parts and Materials:

No Part name Material No Part name Material

1 Bonnet GGG50 5 Gasket galvanized

2 Mesh SS304 6 Nut galvanized

3 Body GGG50 7 Plug Carbon steel
4 Gasket NBR

Data size:
P41X/P11X
Design & Manufacture Standard:
Design Standard: JB/T 12386-2015

Air Release Valve Series

Flange Connection Standard: GB/T17241.6-2008
Testing Standard: GB/T 13927-2008

Single Orifice Air Valve

Functions and Uses

Air vent valve is used in independent heating system, central heating system, heating boiler, central air conditioning, floor heating
system, etc. Because there is a certain amount of air dissolved in water, and the solubility of air decreases with the increase of
temperature. In this way, in the process of water circulation, the gas is gradually separated from the water, and gradually gathered
together to form large bubbles or even gas columns. Because of the supplement of water, gas is often produced.
Main Parts and Materials:

No Part name Material No Part name Material

1 Copper air valve HPb59-1 5 Seal gasket EPDM

2 Bolt WCB 6 Basketry POLY

3 Bonnet GGG50 7 Body GGG50
4 Ball ABS

Data size:
QB2
Design & Manufacture Standard:
Design Standard: JB/T 12386-2015

Air Release Valve Series

Flange Connection Standard: GB/T17241.6-2008
Testing Standard: GB/T 13927-2008

Double Orifice Air Valve

Nominal Pressure Body test pressure Seal test pressure

Suitable Temperature Suitable Medium
Water

Functions and Uses

The valve is applicable to the pipeline with water as working medium, as the equipment for removing gas in the pipeline, improving the
efficiency of water conveying equipment and protecting the pipeline from deformation and fracture. When the pipeline is under
negative pressure, the product can automatically inhale air to prevent pipeline rupture; the valve has double exhaust, with large
exhaust port; it has its own maintenance valve, which can be closed during maintenance, and can be maintained online.
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG50/GG25 6 Bolt galvanized
2 Large floating ball ABS 7 Gasket galvanized
3 Small floating ball ABS 8 Seal washer NBR
4 Seal washer NBR 9 Seal cover GGG50/GG25
5 Seal cover GGG50/GG25 10 air release plug 2Cr13

Data size:

DN&Pressure
J41X
Design & Manufacture Standard:
Design Standard: GB/T 12235

Globe Valve Series Testing Standard: GB/T 26480

Globe Valve
Functions and Uses
It can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive media. Therefore, this
type of stop valve is very suitable for cutting off or regulating and throttling. Because the opening or closing stroke of the valve stem is
relatively short, and it has a very reliable cut-off function, and because the change of the valve seat opening is in direct proportion to the
stroke of the valve disc, it is very suitable for the adjustment of the process.

Technical parameters
Material
Carbon Steel Austentic stainless steel
Main Parts
Body/Disc/Bonnet WCB CF8/CF8M
Seal 13Cr/STL Body material/STL
Stem Cr13 series CF8/CF8M
Main Parts and Materials:

Locking
Part name Body Seat Seal ring Disc Stem Bonnet Gland nut Stem nut Hand wheel
nut
GGG50/GG
Material Brass Brass GGG50 SS GGG50 GGG50 Brass GGG50 WCB
25

Data size:
Q41X
Design & Manufacture Standard:
Design Standard: GB/T 12237

Ball Valve Series Testing Standard: GB/T 13927

Ball Valve
Functions and Uses
Ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. It only needs to rotate 90 degrees
and a small torque to close tightly. Ball valve is most suitable for switch and cut-off valve. Small fluid resistance, full bore ball valve basically
no flow resistance. The valve has the advantages of simple structure, small volume and light weight.

Technical parameters
Main Parts
Material Body Ball Seat

Carbon Steel A216 / WCB A182/ F304 / F306

PTFE/Ni55/STL
Stainless steel A351 /CF8 A182/ F304
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG50/GG25 8 Stem SS201

2 Bonnet GGG50/GG25 9 Gland packing PTFE

3 Nut Carbon steel 10 Gland nut GGG50/GG25

4 Bolt Carbon steel 11 Guide ring Carbon steel

5 Ball SS201 12 Circlip Carbon steel

6 Seat PTFE 13 hand lever GG25

7 Washer PTFE 14 Nut Carbon steel

Data size:
H42
Design & Manufacture Standard:
executive standard : Q/12 NJ3583-2001

Foot Valve Series Testing Standard: GB/T 13927-2008

Foot Valve

Functions and Uses

The Foot valve consists of valve body, valve cover, disc, sealing ring and gasket, and the valve disc at the bottom is composed of
single disc, double disc and multi disc. After the foot valve is connected to the pipeline, the liquid medium enters into the valve body
from the valve cover direction, and the liquid pressure acts on the valve disc, so that the valve disc is opened to allow the medium to
flow through. When the medium pressure of the valve body changes or disappears, the valve disc is closed to prevent the medium
from flowing back.
Main Parts and Materials:

No Part name Material No Part name Material

1 Body GGG50 5 Disc GGG50+EPDM
2 Guide GGG50 6 Nut SS304
3 Spring SS304 7 Mesh SS304
4 Stem 2Cr13

Data size:
100X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Remote Control Float Ball Valve

Functions and Uses

Control the liquid level of water tower or pool, simple maintenance, flexible and durable, high accuracy of liquid level control, water
level is not disturbed by water pressure, and the opening and closing is tight without leakage.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
200X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Relieve Valve

Nominal Pressure outlet pressure adjustment range Body test pressure Seal test pressure Suitable Medium
Suitable Temperature
Water

Functions and Uses

Adjust and control the outlet pressure of the main valve. The outlet pressure of the main valve does not change with the change of the
inlet pressure, nor does it change with the change of the outlet flow of the main valve. It can be used in domestic water supply, fire
protection system and industrial water supply system.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
300X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Slow Closing Check Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

Check valve which can control the opening and closing speed can be adjusted to the best opening or closing speed in combination
with the site when the pump starts or stops moving. It can be used in high-rise buildings, reduce water hammer phenomenon, has
achieved safe and quiet opening and closing effect.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
400X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Flow Control Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

The main valve is installed in the pipeline where the flow needs to be controlled in the distribution pipeline, and the predetermined flow
is kept unchanged, the excessive flow is limited to a predetermined value, and the upstream high pressure is reduced to the
downstream low pressure. Even if the pressure upstream of the main valve changes, it will not affect the flow downstream of the main
valve.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
500X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Pressure Relief/ Pressure holding valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

When the pressure in the water supply pipe exceeds the rated pressure of the pressure relief valve, the pressure relief valve is opened
to prevent the pipeline and equipment from being damaged due to overpressure. It can be used for pressure relief of fire test cycle
system in high-rise buildings, so as to prevent the system danger caused by too high water pressure.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
600X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Solenoid Control Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

The valve is used for installation in the pipeline, as a remote control opening and closing valve, can replace the large electric device
used to open and close gate valve or butterfly valve. It is small in volume, light in weight, simple in maintenance, convenient in use,
safe and reliable.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
700X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Pump Control Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

The valve can control the check valve of the water pump. When 90% of the main valve is closed by the inlet pressure before the water
pump stops running, the water pump will stop automatically, and the remaining 10% is closed by the return water, which can
completely prevent water hammer. It is suitable for direct water supply by water pump and domestic water pipe network system in
industry, mining, enterprises and high-rise buildings.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
800X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Differential Pressure Bypass Balance Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

It is used between the supply and return water of air conditioning system to ensure the differential pressure between the supply and
return water, improve the profit margin of the system, keep the accurate constant value of the differential pressure, reduce the noise of
the system, and damage the equipment caused by excessive differential pressure.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
900X
Design & Manufacture Standard:

Control Valve Series Design Standard : JB/T 10674

Emergency Shut-off Valve

Nominal Pressure Body test pressure Seal test pressure Seal test pressure
Suitable Temperature
Water

Functions and Uses

The valve is suitable for the water supply system of fire water and domestic water in parallel in living quarters. When the fire water is
used, the valve automatically closes to cut off the domestic water to ensure the fire water. When the fire is over, the valve
automatically opens to restore the domestic water supply, which is more cost-effective than the traditional fire water supply alone.
Main Parts and Materials:

Seal ring,O
Part name Body, Bonnet Guide, disc Stem Spring Needle valve Ball Valve Pilot valve Microfilter
ring

Material Ductile iron Copper alloy NBR 2Cr13 50CrVA Copper alloy Copper alloy SS SS

Data size:
SP45F
Design & Manufacture Standard:
Connection Type: Flange Connection

Balance Valve Series Connection Standard : EN1092-1/2

GB/T17241.6-2008

Static Balance Valve

Nominal Size Nominal Pressure Seal test pressure Suitable Temperature

Air conditioning hot and cold water,
ethylene glycol/propylene glycol solution
Main Parts and Materials:

NO Part name Material No Part name Material

1 Body Ductile iron 7 Bonnet Ductile iron
2 Disc Ductile iron /SS/ Brass 8 Bolt SS

Nylon DN40-DN250
3 Locking nut Brass / SS 9 Hand wheel
Die-casting Aluminium DN300-D500

4 Sealing PTFE/ EPDM 10 Measuring head Brass

5 Stem Brass / SS
6 Lock core rod Brass / SS

Data size:
SP45F
Design & Manufacture Standard:
Connection Type: Flange Connection

Balance Valve Series

Connection Standard : EN1092-1/2 GB/T17241.6-2008
Control Precision: ±8%
Max.working differential pressure: ≤ 400KPa

Differential Pressure Balance Valve

Nominal Size Nominal Pressure Seal test pressure Suitable Temperature

Air conditioning hot and cold water,
ethylene glycol/propylene glycol solution
Main Parts and Materials:

No Part name Material No Part name Material

1 Body Ductile iron 5 Diaphragm EPDM

2 Disc SS 6 Seal NBR

3 Stem SS 7 Hand wheel PA

4 Spring SS 8 Measuring head Brass

Data size:
KXT
Design & Manufacture Standard:

Resilient Joint Series GB: GB/T 9112-2000

High Pressure Rubber Joint (Germany Standard)

Nominal Pressure Seal test pressure

Suitable Temperature
Water, sea water, steam, oil, acid and alkali, etc
Functions and Uses

High Pressure Rubber Joint (Germany Standard) is mainly used to reduce vibration, noise, good flexibility, easy to use.
It is a kind of pipe joint with high elasticity, high air tightness, medium resistance and weather resistance.

Technical parameters
Break Pressure Vacuum Degree
Type
(MPa) (KPa)
NO 1 3 53.3
NO 2 4.8 86.7
NO 3 5.5 100
Main Parts and Materials:

No Part name Material No Part name Material

1 Inner/Outer rubber NR,EPDM,NBR 3 Pressurized ring Steel wire strand

2 Key frame Nylon cord fabric 4 Flange Q235

Data size:

Flange Screw center Lateral

Flange Axial allowable Rotation
Nominal Diameter Length outside circle Screw No allowable
thickness extension angle
diameter diameter extension
mm inch 95 140 100 16 18-4 6 9 9 15°
32 1 1/4 95 150 110 16 18-4 6 10 9 15°
40 1 1/2 105 165 125 18 18-4 7 10 10 15°
50 2 115 185 145 18 18-4 7 13 11 15°
65 2 1/2 130 200 160 20 18-8 8 15 12 15°
80 3 135 220 180 20 18-8 10 19 13 15°
100 4 170 250 210 22 18-8 12 19 13 15°
125 5 180 285 240 22 22-8 12 20 14 15°
150 8 205 340 295 24 22-8 16 25 22 15°
200 10 240 396 350 26 22-12 16 25 22 15°
250 12 260 445 400 26 22-12 16 25 22 15°
300 14 255 505 460 28 22-16 16 25 22 15°
400 16 255 565 515 32 22-16 16 25 22 15°
450 18 255 615 565 38 26-20 16 25 22 15°
500 20 255 670 620 38 26-20 16 25 22 15°
600 24 260 780 725 38 30-20 16 25 22 15°
VSSJA-2(B2F)
Design & Manufacture Standard:
Design Standard: GB/T 12456-2007
Expansion Joint Series Quality Certificate: ISO 9001-2008
Flange Connection Standard: GB/T 9115.1-2000

Telescopic Flange Connection Joint

Nominal Shell Liquid high

Pressure Strength pressure seal Suitable Temperature Suitable Temperature
Water
Functions and Uses
The telescopic flange connection joint is composed of flexible expansion joint and limited expansion pipe, which can
prevent the leakage or damage of the connection joint due to excessive displacement. It is used to absorb the axial
displacement and bear the pressure thrust in the allowable displacement range.

Technical parameters

Seal ring Gland Flange

QT400-15,Q235A,ZG230- QT400-15,Q235A,ZG230-
NBR Q235A,20,16Mn
450,20 450,20
Main Parts and Materials:
No Part name Material
1 Body QT450-10,Q235A
2 Seal ring NBR
3 Gland QT450-10,Q235A
4 Limit tube Q235A
5 Nut Q235A,20#
6 Bolt Q235A,35#
7 Bolt Q235A,35#
Data size:
Flange connecting dimension
Nominal Size
Pipe Diameter Stretching Amount 0.6MPa 1.0MPa
Diameter
L L1 D D1 n-do D D2 n-do
65 76 160 130 4-Φ14 185 145 4-Φ18
80 89 190 150 200 160
340 105 50
100 108 210 170 4-Φ18 220 180
8-Φ18
100 114 210 170 220 180
125 133 240 200 250 210
125 140 240 200 250 210
150 159 265 225 8-Φ18 285 240
340 105 50 8-Φ22
150 168 265 225 285 240
200 219 320 280 340 295
250 273 375 335 12-Φ18 395 350
12-Φ22
300 325 440 395 445 400
12-Φ22
350 377 490 445 505 460 16-Φ22
400 426 540 495 565 515 16-Φ26
16-Φ22
450 480 370 130 65 595 550 615 565 20-Φ26
500 530 645 600 20-Φ22 670 620 20-Φ26
600 630 755 705 20-Φ26 780 725 20-Φ30
700 720 860 810 24-Φ26 895 840 24-Φ30
800 820 975 920 1015 950 24-Φ33
24-Φ30
900 920 1075 1020 1115 1050 28-Φ33
600
1000 1020 1175 1120 28-Φ30 1230 1160 28-Φ36
1200 1220 1405 1340 32-Φ33 1455 1380 32-Φ40
1400 1420 1630 1560 1675 1590 36-Φ42
36-Φ36
1500 1520 220 130 1730 1660
1600 1620 1830 1760 40-Φ36 1915 1820 40-Φ48
1800 1820 640 2045 1970 40-Φ40 2115 2020 44-Φ48
2000 2020 2265 2180 48-Φ42 2325 2230 48-Φ48
2200 2220 2475 2390 52-Φ42 2550 2440 52-Φ56
2400 2420 2685 2600 56-Φ42 2760 2650 56-Φ56
2600 2620 2905 2810 60-Φ48 2960 2850 60-Φ56
2800 2820 3115 3020 64-Φ48 3180 3070 64-Φ56
3000 3020 3315 3220 68-Φ48 3405 3290 68-Φ60
710 240 140
3200 3220 3525 3430 72-Φ48
3400 3420 3735 3640 76-Φ48
3600 3620 3970 3860 80-Φ56
VSSJA(C2F)
Design & Manufacture Standard:
Design Standard: GB/T 12456-2007
Expansion Joint Series Quality Certificate: ISO 9001-2008
Flange Connection Standard: GB/T 9115.1-2000

Double Flanges Flexible Expansion Joint

Nominal Shell Liquid high

Pressure Strength pressure seal Suitable Temperature Suitable Temperature
Water
Functions and Uses

The double flanges flexible expansion joint is composed of body, sealing ring and compression structure, which is
used to absorb the axial displacement and cannot bear the pressure and thrust.

Technical parameters

Seal ring Gland Flange

QT400-15,Q235A,ZG230- QT400-15,Q235A,ZG230-
NBR Q235A,20,16Mn
450,20 450,20
Main Parts and Materials:
No Part name Material
1 Body Ductile iron
2 Seal ring NBR
3 Gland Ductile iron
4 Limit bolt Quality carbon structural steel / SS
5 Limit expansion tube Quality carbon structural steel
Data size:
VSSJAF(CC2F)
Design & Manufacture Standard:
Design Standard: GB/T 12456-2007
Expansion Joint Series Quality Certificate: ISO 9001-2008
Flange Connection Standard: GB/T 9115.1-2000

Double Flanges Flexible Expansion Dismantling Joint

Nominal Shell Liquid high

Pressure Strength pressure seal Suitable Temperature Suitable Temperature
Water
Functions and Uses
Double Flanges Flexible Expansion Dismantling Joint is composed of flange flexible expansion joint, short pipe flange,
force transmission screw, etc., which transmits pressure thrust of connected parts and compensation pipeline
installation deviation, and does not absorb axial displacement, and is used for flexible connection with pump, valve
and other accessories.

Technical parameters

Seal ring Gland Flange

QT400-15,Q235A,ZG230- QT400-15,Q235A,ZG230-
NBR Q235A,20,16Mn
450,20 450,20
Main Parts and Materials:
No Part name Material
1 Body Ductile iron
2 Seal ring NBR
3 Gland Ductile iron
4 Limit bolt Quality carbon structural steel / SS
5 Limit expansion tube Quality carbon structural steel
Data size:
HH47 / H47XH / HDH47X
Design & Manufacture Standard:
Design Standard: GB/T 12456-2007
Check valve series Quality Certificate: ISO 9001-2008
Flange Connection Standard: GB/T 9115.1-2000

Butterfly Type Non-slam Check

Functions and Uses
Mainly used for industrial water supply and sewage treatment plant, to prevent the medium in the pipe network from
countercurrent, automatically eliminate destructive water hammer,to ensure that the pump and pipeline are not
damaged.

Technical parameters： Butterfly valve

Nominal Pressure:1.0-2.5MPa
Nominal Diameter:40-1400mm Strainer
Suitable Medium: water,oil,sea water,sewage
Suitable Temperature:0-80℃
Flange Connection:GB/T 17241.6 GB/T9113
Pressure Testing: GB/T 13927 API598

Main Parts and Materials: Pumb Check valve

Part name Body Disc Seal ring Stem Packing

Cast Iron,WCB,Ductile
Material Cast Iron, WCB EPDM,Neoprene SS PTFE
iron

Size unit: mm
Dd973H
Butterfly valve series

Wafer type multiple layers metalic hard sealing butterfly valve

Connection Dimensions:
D371X
Butterfly valve series

Use:
Longer mainly for underground pipes or difficult to close the
valve gear for extended use.

Features:
1.The structure of compact,small size,can effectively
transmit torque.
2.Reasonable design,assembly or disassembly or maintenance
easily.

Techinical data:
Nominal Diameter(mm):50-800
Nominal Pressure(Mpa):1.6
Extended Pressure(Mpa):0-10000

Long-lever Butterfly valve

Overall & Connection Dimensions:
GLK673
Pneumatic knife gate valve
Products Range:
Pressure rate:PN10
Size: DN50-DN800
Operated type:Pneumatic actuator
Body material: DI,SS,Duplex SS.
Operated type:Pneumatic actuator
Cylinder type:Double acting
DESCRIPTION:

1. Working pressure: 1.6Mpa

2. Working temperature: -10℃～+120℃

3. Face to face according to GB9113

4. Medium: Water, Steam, Oil etc.

DESCRIPTION:

1. Working pressure: 1.6Mpa

2. Working temperature: -10℃～+120℃

3. Face to face according to GB9113

4. Medium: Water, Steam, Oil etc.

Features:
Reduced port,1/2''-2''(DN15-DN50)
Working pressure:2000WOG(PN150)
Working temperature:-20℃～180℃
Blow-out proof stem(1-1/4''-2'')
NACE MR0175
Locking device handle(option)
Thread type:ASME B1.20.1(NPT)
DIN259/DIN2999.BS21
ISO288-1,ISO7-1
Design:ASME B16.34
Flange dimension:ASME B16.5 Features:
Face to face: ASME B16.10 Full Port,1/2''~12''(DN15~DN300)
Inspection &testing: API598 Working pressure:CLASS 150/300
Working temperature:-20℃～180℃
Investment casting
Blow-out proof stem
Anti-statice device(option)
Lock device handle
ISO5211 Direct Mounting Pad
API607 Fire safe(option)
Automation accessories(option)
Material List
Features:
Full Port,1/4''~4''(DN8~DN100)
Working pressure:1000WOG(PN63)
Working temperature:-20℃～180℃
Investment casting
Blow-out proof stem
Lock device handle(option)
Thread Type:ASME B1.20.1(NPT)
DIN 259/DIN2999.BS 21
ISO288-1,ISO 7-1
Socket Weld Type:ASME B16.11 &DIN3239
 Re forged steel gate valve,this design of the bonnet
is the bolted bonnet,with male-female joint,spiral
wound gasket,made in F304L/graphite,or ring joint
gasket is also available if request.

Application standards:
1.Desgin and manufacture:API602;ASME B16.34;JB/T7746;GB/
T12224 regulations.
2.According to the length of the structure;JB/T7746
standard or customer requirements.
3.Socketd welding size: ASME B16.11;JB/T7746(SW)
regulations.
Size of butt welding end:ASME B16.25;JB/T7746(BW)
regulations.
Screw thread size:ASME B1.20.1(NPT);GB/T7036(Rc)
regulation.
4.Inspection and test:API598;JB/T9092;GB/T26480
regulations.
5.Structural features:B.B(middle bolt),B(middle welding)
flow;full diameter(FP) diameter RP.
6.Main materials: A105N,LF2,LF3,F11,F5,F22,F304,F304L,
F316,F316L,F321,F304H,F316H,F321H,F51,F55,F91,F92,F347,
310S,800H,600,625 Special material,etc.
Main part material list

No Part name A105/F6a A105/F6aHFS LF2/304 F11/F6aHF F304(L)304(L) F316(L)316(L) F51/F51

1 Body A105 A105/F6aHFS LF2 F11 F304(L) F316(L) F51
2 Seat 410 410HF 304 410HF 304(L) 316(L) F51
3 Wedge F6a F6a F304 F6aHF F304(L) F316(L) F51

4 Stem 410 410 304 410 304(L) 316(L) F51

304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible

5 Gasket
graphite graphite graphite graphite graphite graphite graphite

6 Bonnet A105 A105 LF2 F11 F304(L) F316(L) F51

7 Bolt B7 B7 L7 B16 B8(M) B8(M) B8M
8 Pin 410 410 410 410 304 304 304
9 Gland 410 410 304 410 304 316 F51
10 Gland eyebolt B7 B7 L7 B16 B8(M) B8(M) B8M
11 Gland flange A105 A105 LF2 F11 F304 F304 304
12 Hex nut 2H 2H 2H 2H 8(M) 8(M) 8M
13 Stem nut 410 410 410 410 410 410 410
14 Locking nut 35 35 35 35 35 35 35
15 Name plate AL AL AL AL AL AL AL
16 Handwheel A197 A197 A197 A197 A197 A197 A197
17 Lubricating gasket 410 410 410 410 410 410 410
18 Packing Graphite Graphite Graphite Graphite Graphite Graphite Graphite
 Application specifications:
1.Design standard: API602;ASME
B16.34;JB/T7746;GB/T12224
2.Structure standard:JB/T7746 standard or
customer requirements.
3.Socket dimension:ASME
B16.25;JB/T7746(BW)
BW Connection Dimension: ASME
B16.25;JB/T7746(BW)
Thread end dimension:ASME
B1.20.1(NPT);GB/T7306(Rc).
4.Inspection and
test:API598;JB/T9092;GB/T26480
5.Structural feature:B.B(middle bolt),B(middle
welding)flow;full diameter(FP)diameter RP.
6.Main
material:A105N,LF2,LF3,F11,F5,F22,F304,F304
L,F316,F316L,F321,F304H,F316H,F321H,F51,F5
3,F91
,F92,F347,310S,800H,600,625,other special
materials.

Carbon Steel temperature-pressure rate

CL 150-285 P.S.I@100°F CL300-740 P.S.I@100°F CL600-1480P.S.I@°F

CL800-1975 P.S.I@100°F CL1500-3705 P.S.I@100°F
 (Female Threaded & Socked Welded)
Globe valve series

Main part material list

No Part name A105/F6a A105/F6aHFS LF2/304 F11/F6aHF F304(L)304(L) F316(L)316(L) F51/F51

1 Body A105 A105+HF LF2 F11+HF F304(L) F316(L) F51

2 Disc F6a F6a F304 F6aHF F304(L) F316(L) F51
3 Stem 410 410 304 410 304(L) 316(L) F51
304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible
4 Gasket
graphite graphite graphite graphite graphite graphite graphite

5 Bonnet A105 A105 LF2 F11 F304(L) F316(L) F51

6 Bolt B7 B7 L7 B16 B8(M) B8(M) B8M

7 Pin 410 410 410 410 304 304 F304
8 Gland 410 410 304 410 304 316 F51
9 Gland eyebolt B7 B7 L7 B16 B8(M) B8(M) B8M
10 Gland flange A105 A105 LF2 F11 F304 F304 F304
11 Hex nut 2H 2H 2H 2H 8(M) 8(M) 8M
12 Stem nut 410 410 410 410 410 410 410
13 Locking nut 35 35 35 35 35 35 35
14 Name plate AL AL AL AL AL AL AL
15 Handwheel A197 A197 A197 A197 A197 A197 A197
16 Packing Graphite Graphite Graphite Graphite Graphite Graphite Graphite
Forged Steel Check Valve
(Female Thread & socket welded check valve)
Check valve series
Application specifications:
1.Design& manufacture:API602;ASME B16.34;
JB/T7746; GB/T12224 regulations.
2.According to the length of the structure:JB/T7746
standard or customer requirements.
3.Socked welding size:ASME B16.11;
JB/T7746(SW) regulations.
Size of butt welding end:ASME B16.25;
JB/T7746(BW)regulations.
Screw thread size:ASME B1.20.1(NPT);
GB/T77306(RC)regulations.
4.Inspection and test:API598;JB/9092;GB/T26480
regulations.
5.Structural features：B.B(middle bolt),W.B(middle
welding) flow;full diameter(FP);diameter RP.
6.Main materials: A105N, LF2, LF3, F11, F5, F22,
F304,F304L,F316,F316L,F321,F304H,F316H,F321
H,F51,F53,F91,F347,310S,800H,600,625 other
special materials.
Forged Steel

Main part material list

No Part name A105/F6a A105/F6aHFS LF2/304 F11/F6aHF F304(L)304(L) F316(L)316(L) F51/F51

1 Body A105 A105 LF2 F11 F304(L) F316(L) F51

2 Seat ring 410 410HF 304 410HF 304(L) 316(L) F51

3 Disc F6a F6a F304 F6aHF F304(L) F316(L) F51

304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible 304+Flexible
4 Gasket
graphite graphite graphite graphite graphite graphite graphite

5 Bonnet A105 A105 LF2 F11 F304(L) F316(L) F51

6 Bolt B7 B7 L7 B16 B8(M) B8(M) B8M

7 Name plate AL AL AL AL AL AL AL

8 Revit AL AL AL AL AL AL AL

9 Steel ball 430 430 304 STL 316(L) 316(L) STL

10 Disc nut 2H 2H 8 8 B8(M) B8(M) 8M

11 Hinge 410 410 304 410 316(L) 316(L) F51

12 Pin 410 410 304 410 304(L) 316(L) F51

 THE END

Add: No.29, 6th Road, Xiaozhan Industrial

Park, Jinnan District, Tianjin, 300353, China
Online: 0086 15822946014
Email: [email protected];
http://www.tjots.com