Scribd
Upload
25 views1 page

Tower Footing Resistance Test Kit Specification

The document outlines the Guaranteed Technical Particulars (GTP) for an Earth Ground/Tower Footing Resistance Test Set, requiring specific information from the manufacturer and bidder. It includes details such as manufacturer name, model number, country of origin, technical specifications, features, and required documentation for compliance. Both parties must sign the document on their letterhead for the bid to be accepted.

Uploaded by

Md. Mijanour Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
25 views1 page

Tower Footing Resistance Test Kit Specification

The document outlines the Guaranteed Technical Particulars (GTP) for an Earth Ground/Tower Footing Resistance Test Set, requiring specific information from the manufacturer and bidder. It includes details such as manufacturer name, model number, country of origin, technical specifications, features, and required documentation for compliance. Both parties must sign the document on their letterhead for the bid to be accepted.

Uploaded by

Md. Mijanour Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

GUARANTEED TECHNICAL PARTICULARS (GTP) FOR EARTH GROUND/TOWER

FOOTING RESISTANCE TEST SET


(To be filled up with the Sealed & Signed by both manufacturer and bidder in Manufacturer’s
Letterhead Pad, otherwise the bid will be rejected)

Sl. Manufacturer’s Guaranteed


Description PGCB Requirement
no. Particulars
Earth Ground/Tower Footing Resistance
1. Description of the Item
Test Set
2. Name of the Manufacturer To be mentioned
3. Address of the manufacturer To be mentioned
4. Type To be mentioned
5. Model number To be mentioned
USA/UK/EU/Canada /Switzerland/
6. Country of origin
Australia/Brazil/Japan
USA/UK/EU/Canada /Switzerland/
7. Country of made
Australia/Brazil/Japan
8. Country of Shipment To be mentioned
9. Standards IEC/IEEE/CIGRE/ANSI or equivalent
10. Power Supply Battery Operated
11. Measurement:
MeasuringRange 0 to 200 Ω or more
Measuring Accuracy +/- 3% of rdg +/-1 digit or better
Test Frequency >=20KHz
Test Current >=20mA
Earth Resistance of Auxiliary 2 kΩ (For both voltage & current rod) or
Rods less
Inductive Component Yes
Compensation
12 Features & Others
Display Alphanumerical LCD display. Clear and
visible display in daylight.
Storage Data/Internal Memory Min. 1000 test readings
Operating temperature 0 °C to 50 °C Min.
Storage temperature 0 °C to 50 °C Min.
Humidity 20-90% RH
Dimension To be mentioned
Over Voltage Protection CAT IV-300V (Min)
Safety IEC 61010-1
Standard followed EMC To be mentioned
conformity
Communication USB & OTHERS
IP Rating IP 65
Accessories to be supplied AC adapter, battery, rods, shielded cables,
USB cable, Case to carry accessories & all
other standard accessories incl.
13 Documents requirement:
Certificates to be supplied with 1. Manufacturer’s EMC Certificate of
the tender document Conformity
2. Manufacturer’s valid ISO Certificate.
3. Manufacturer’s Safety Certificate of
Conformity
4. Manufacturer’s Certificate of test
Conformity
5. Printed Catalogue and Brochures
Document to be supplied during 1. Country of origin Certificate
supply 2. Copy of Shipping documents
3. Valid Calibration Certificate
__________________________ ________________________________

Seal & Signature of the Bidder Seal & Signature of the Manufacturer

You might also like