SEGMENT: P-1

PART NO. : 9-888-126-01

MODEL MODEL
KDL-22EX420 KDL-40EX520
KDL-22EX423 KDL-40EX523
KDL-26EX420 KDL-46EX520
KDL-26EX423 KDL-46EX523
KDL-32EX420
KDL-32EX520
KDL-32EX523

NO SUFFIX DATE SUPP/CORR DESCRIPTION

1 -01 2011/01 -- 1st Issue

 SEGMENT: P-1
MODEL COMMANDER DEST MODEL COMMANDER DEST
RM-GD020, CD013 Sogul Area, Singapore, Indonesia, Vietnam, RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore,
KDL-22EX420 KDL-40EX520
Phillippines, India, Thailand, Malaysia, South Indonesia, Vietnam, Phillippines, India,
Africa, Taiwan, Hong Kong. Thailand, Malaysia, South Africa, Australia,
KDL-22EX423 RM-GD020 Saudi Arabia, Nigeria New Zealand, Saudi Arabia, Nigeria.
RM-GD020 Iran, Saudi Arabia, Nigeria
KDL-26EX420 RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore, KDL-40EX523
Indonesia, Vietnam, Phillippines, India, Thailand, RM-GD020, CD013 Taiwan, Sogul Area, Singapore, Indonesia,
KDL-46EX520
Malaysia, South Africa, Australia, Saudi Arabia, Vietnam, Phillippines, India, Thailand,
Nigeria Malaysia, South Africa, Australia, New
Zealand, Saudi Arabia, Nigeria.
KDL-26EX423 RM-GD020 Saudi Arabia, Nigeria
RM-GD020 Iran, Saudi Arabia, Nigeria
RM-GD020 Sogul Area, Singapore, Indonesia, Vietnam, KDL-46EX523
KDL-32EX420
Phillippines, India, Thailand, Malaysia, Australia,
New Zealand
RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore,
KDL-32EX520
Indonesia, Vietnam, Phillippines, India, Thailand,
Malaysia, South Africa, Australia, New Zealand,
Saudi Arabia, Nigeria
KDL-32EX523 RM-GD020 Iran, Saudi Arabia, Nigeria
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
TABLE OF CONTENTS RM-GD020

Section Title Page Section Title Page

1. SAFETY NOTES 5. DIAGRAMS
1-1. Caution Handling of LCD Panel ........................……………..…...................... 3 5-1. Bl ock Diagram ……………............................................................................... 56
1-2. Safety Check Out ......................................…………...………….......................... 3 5-2. W ire Dressing
1-3. Leakage Test ......................................................................................................... 3 5-2-1. KDL-22EX420, 22EX423 ................................................................................. 60
1-4. How to find a g
good earth g ground ......................................………… 4 5-2-2. K DL-26EX420,, 26EX423 ................................................................................. 61
1-5. WARNING and Caution ....................................................................................... 4 5-2-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 62
1-6. Lead Free Information ......................................................................................... 4 5-2-4. K DL-40EX520, 40EX523………………………………………….................. 63
1-7. Information regarding Bezel and Panel………………………………………… 6 5-2-5. K DL-46EX520, 46EX523………………………………………...................... 64
5-3. Conne ctor Diagram …………………………………………………………… 65
2. SELF DIAGNOSTIC FUNCTION 5-4. Circuit Board Location
2-1. Overview of Control Buttons ……………............................................................ 16 5-4-1. KDL-22EX420, 22EX423 ................................................................................. 68
22
2-2. LED Display Specification ................................................................................... 16 5-4-2 KDL-26EX420,
5-4-2. KDL-26EX420 26EX423 ................................................................................. 68
2-3. LED Display Control ............................................................................................. 16 5-4-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 68
2-4. LED Pattern ............................................................................................................ 17 5-4-4. K DL-40EX520, 40EX523………………………………………….................. 68
2-5. Standby LED Error Display ................................................................................. 17 5-4-5. K DL-46EX520, 46EX523………………………………………...................... 68
2-6. Triage Chart ........................................................................................................... 18
6. DISASSEMBLY, EXPLODED VIEWS AND OTHER PARTS
3. TROUBLE SHOOTING 6-1. KDL-22EX420, 22EX423 ................................................................................. 69
3-1. Power Problem …………..................................................................................... 19 62
6-2. KDL 26EX420 26EX423 .................................................................................
KDL-26EX420, 73
3-2. Standby Led Blinking ........................................................................................... 19 6-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 76
3-3. Power (Green) LED Blinking............................................................................... 27 6-4. K DL-40EX520, 40EX523……………………………………………………… 79
3-4. No Picture …………………………………………………….............................. 28 6-5. K DL-46EX520, 46EX523………………………………………….................. 82
3-5. No Sound ………………………………………………………………………… 30 6-6. O ther Parts .....................................................……………………….............… 85
3-6. TV Commander and Keys Malfunction ........................................................ 30
3-7.
3 7. Network Malfunction……………………………………...................................... 33 OPERATING INSTRUCTIONS
3-8. Camera Malfunction ……………………………………………………… 35
3-9. 3D Malfunction…………………………………………………………………… 36
3-10. HDD-Rec Malfunction …………………………………………………………… 37
3-11. Skype Trouble Shooting Flow ……………………………………………………38
3-12. Trouble Shooting Reference …………………………………………………… 40

4 SERVICE ADJUSTMENTS
4.
4-1. Accessing Self Diagnostic Menu …………....................................................... 46
4-2. Accessing Service Mode ..................................................................................... 47
4-3. Transition of Each Module in Service Mode …………..................................... 47
4-4. Change Data by Service Mode 1 ……………………………………………… 48
4-5. Change Data by Service Mode 2 ……………………………………………… 49
4-6. White Balance Adjustment ……………………………………………………… 50
4-7. Restore White Balance /Gamma Adj-data to B Board ……………………… 51
4-8. Change the Emitter Output Level ……………………………………………… 51
4-9. Viewing VCOM Test Pattern ……………………………………………… 52
4-10. How to do Shipping Condition ………………………………………………… 53
4-11. Remote Commander Function………………………………………………… 53
4-12
4-12. Index Flow of Service Control …………………………………………………… 54

3
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
SECTION 1 KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
SAFETY NOTES RM-GD020

1-1. Caution Handling of LCD Panel 3)Check all control knobs, shields, covers, ground straps and mounting
When repairing the LCD Panel, make sure you are grounded with a wrist band. hardware have been replaced. Be absolutely certain you have replaced all
When repairing the LCD Panel on the wall, the panel must be secured using the 4 the insulators.
mounting holes on the rear cover. 4) Look for unauthorized replacement parts, particularly transistors that were
1) Do not press the panel or frame edge to avoid the risk of electric shock. installed during a previous repair. Point them out to the customer and
2) Do not scratch or press on the panel with any sharp objects. recommend their replacement.
3) Do not leave the module in high temperature or in areas of high humidity for 5) Look for parts which, though functioning show obvious signs of deterioration.
an extended period of time. Point them out to the customer and recommend their replacement.
4) Do not expose the LCD panel to direct sunlight. 6) Check the line cords for cracks and abrasion. Recommend the replacement
5) Avoid contact with water. It may cause short circuit within the module. of any such line cord to the customer.
6) Disconnect the AC power when replacing the backlight (CCFL) or 7) Check the antenna terminals, metal trim, metallized knobs, screws and all
inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms) other exposed metal parts for AC leakage. Check leakage test as described
7) Always clean the LCD panel with a soft cloth material. next.
8) Use care when handling the wires or connectors of the inverter circuit. 8. For safety reasons, repairing the Power board and/or Inverter board is prohibited.
Damaging the wires may cause a short circuit.
9) Protect the panel from ESD to avoid damaging the electronic circuit
(C-MOS). 1-3. Leakage Test
10) During the repair, DO NOT leave the Power On or Burn-in period for more than The AC leakage from any exposed metal part to earth ground and from all exposed
1 hour while the TV is face down on a cloth. metal parts to any exposed metal part having a return to chassis must not exceed
0.5mA (500 microamperes).
Leakage current can be measured by any one of the three methods:-
1. A commercial leakage tester such as the SIMPSON 229 or RCA WT-540A.
Follow the manufacturers instructions to use those instructions.
2. A battery-operated AC milliampmeter. The DATA PRECISION 245 digital
multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM or battery
operated AC voltmeter. The 'limit' indication is 0.75V so analog meters must
have an accurate low voltage scale. The SIMPSON'S 250 and SANWA
SH-63TRD are examples of passive VOMs that are suitable. Nearly all
battery operated digital multimeters that have a 2 VAC range are suitable.
(see Figure 1.)
Figure 1. TV is face down on a cloth during reparing

1-2. Safety Check-Out

After correcting the original service problem, perform the following safety checks
before releasing the set to the customer:-
1) Check the area of your repair for unsoldered or poorly soldered connections.
Check the entire board surface for solder splashes and bridges.
2) Check the interboard wiring to ensure that no wires are pinched or contact
high-wattage resistors.
Figure 2. AC voltmeter to check AC leakage

3
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-4. How to Find a Good Earth Ground

A cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw c) Be sure to follow these guidelines to protect your property and avoid causing
on most AC outlet boxes is also at earth ground. serious injury.
If the retaining screw is to be used as your earth ground, verify that it is at ground • Carry the TV with an adequate number of people; larger size TVs require
by measuring the resistance between it and a cold-water pipe with an ohmmeter. two or more people.
The reading should be zero ohms.
• Correct hand placement while carrying the TV is very important for safety
If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not
a neon lamp) between the hot side of the receptacle and the retaining screw. Try and to avoid damages.
both slots, if necessary, to locate the hot side on the line; the lamp should light at d) Components identified by shading and ! mark on the schematic diagrams,
normal brilliance if the screw is at ground potential (see Figure B). exploded views, and in the parts list are critical for safe operation. Replace
these components with Sony parts whose part numbers appear as shown in
this manual or in supplements published by Sony. Circuit adjustments that
are critical for safe operation are identified in this manual. Follow these
procedures whenever critical components are replaced or improper
operation is suspected.

1-6. Lead Free Information

The circuit boards used in these models have been processed using Lead Free
Solder. The boards are identified by the LF logo located close to the board
designation.

Figure 3. Checking for earth ground.

Figure 2: LF
1-5. Warnings and Caution Logo
a) These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so. Figure 3: LF logo on circuit board

b) An isolation transformer should be used during any service to avoid possible

shock hazard, because of live chassis. The chassis of this receiver is directly
connected to the ac power line.

4
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

The servicing of these boards requires special precautions. It is strongly

recommended to use Lead Free Solder material in order to guarantee optimal
quality of new solder joints. Lead Free Solder is available under the following
part numbers:-

Part Number Diameter Remarks

7-640-005-19 0.3mm 0.25Kg

7-640-005-20 0.4mm 0.50Kg
7-640-005-21 0.5mm 0.50Kg
7-640-005-22 0.6mm 0.25Kg
7-640-005-23 0.8mm 1.00Kg
7-640-005-24 1.0mm 1.00Kg
7-640-005-25 1.2mm 1.00Kg
7-640-005-26 1.6mm 1.00Kg

Due to high melting point of Lead Free Solder, the soldering iron tip
temperature needs to be set to 370 degrees centigrade. This requires
soldering equipment capable of accurate temperature control coupled
with a good heat recovery characteristics.
For more information on the use of Lead Free Solder,
please refer to http://www.sony-training.com

5
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
1-7. Information regarding Bezel and Panel
1-7-1. Notice when LCD panel peel off from bezel assembly
Peel off double sided tapes between bezel assembly and LCD panel when 2. Peel off double sided tape
exchanging LCD panel, etc, allow below instruction.

1. Put off “Bracket, Panel”

(1)Hook off LED board to be easy peel off

Should pull up
metal area,
should not cell area.

Put off
(2)Put hand into between bezel and Panel from side,
pull panel up and push down bezel like picture.

Pushing hook
Moving hands

Put off “Bracket, Panel” with pushing bezel hook. The position shows on step by step
following pages.

(3)Moving hand peeling by peeling to pull up and push

down near the tape.

To peel off double sided tape between bezel assembly and panel, push bezel down
and pull panel up. Prohibited pushing panel from front side for prevention break panel.

6
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-2. Exchange double sided tapes

Because double sided tape’s strength weaken when tapes once peeled off, peel off
all tapes from bezel assembly, and stick new ones.

1. Peel off double sided tapes from bezel. 2. Stick double sided tapes
(Possibly remain on panel side)

Double sided tapes

32～46”
Stick double sided tapes as shown in following
Name: DOUBLE SIDED TAPE (PANEL)
pages. Peel off separate papers before panel
P/N: 4-272-200-01
puts on.
Vendor: Chiyoda integre
55”, 60”
Name: DOUBLE SIDED TAPE (PANEL 10)
P/N: 4-281-014-01
Vendor: Chiyoda integre

7
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-3. Putting Panel on to Bezel

While pay attention to double sided tapes, put panel on to bezel assembly as below.

1. Putting Panel on to bezel

(1)Put from upper side

adjusting position to L/R side)
(2) Down panel on to bottom
caring about fitting bezel
position ribs and panel cutout
area.

(1)Put on upper side

(2)Put down

Care about positioning rib (L&R)

2. Putting on “Bracket, panel”

Put brackets and confirm fixed

by hook.

Position of BRACKET, PANEL

show on following page.

8
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-4. Notice when LCD panel peel off from bezel assembly

Peel off double sided tapes between bezel assembly and LCD panel when exchanging LCD panel, etc, allow below instruction.

1. Release hooks of Bezel 2. Peel off double sided tape

Top

Side (L &R)

Cushion

(1)Pull Panel up and push down Bezel (2)Moving hand peeling by peeling
like picture. to pull up and push down near the tape.

To peel off double sided tape between bezel assembly and panel, push bezel down and pull
Please release hooks of top and side. And install a panel up.
cushion to avoid hooks restored. Prohibited pushing panel from front side for prevention break panel.

9
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-5. Exchange double sided tapes

Because double sided tape’s strength weaken when tapes once peeled off,
peel off all tapes from bezel assembly, and stick new ones.

1. Peel off double sided tapes from Panel. (Possibly remain on Bezel side) 2. Stick double sided tapes

Double sided tapes

22”,24”,26" Stick double sided tapes as shown in following pages.
Name: DOUBLE SIDED TAPE (PANEL) Peel off separate papers before panel puts on.
P/N: 4-272-200-01
Vendor: Chiyoda integre

10
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-6. Putting Panel on to Bezel

While pay attention to double sided tapes, put panel on to bezel assembly as below.

1. Putting Panel on to bezel 2. Lock with hooks of Bezel

(1)Put from upper side adjusting position to L/R side) Please lock Panel with hooks of Bezel.
(2) Down panel on to bottom caring about fitting bezel position ribs and panel cutout
Position of Hooks show on following page.
area.

11
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-7. Location of double sided tape for each inches

Double sided tapes on bezel assembly (ornament) for panel is attached as below

24 inch
22 inch 26 inch
2position
1position 2position
DOUBLE SIDED TAPE (PANEL)
DOUBLE SIDED TAPE (PANEL) DOUBLE SIDED TAPE (PANEL)
5x240mm t=0.4
5x440mm t=0.4 5x240mm t=0.4
Not applicable for this booklet

32” 37” 40” 40 inch

32 inch 37 inch
2position
2position 2position
DOUBLE SIDED TAPE
DOUBLE SIDED TAPE (PANEL) DOUBLE SIDED TAPE (PANEL) (PANEL)
5x290mm t=0.4 5x350mm t=0.4 5x380mm t=0.4

Not applicable for this booklet

46” 55” 60”

46 inch 55 inch 60 inch
3position 3position 3position
DOUBLE SIDED TAPE DOUBLE SIDED TAPE DOUBLE SIDED TAPE
(PANEL) (PANEL 10) (PANEL 10)
5x290mm t=0.4 10x350mm t=0.4 10x385mm t=0.4
Not applicable for this booklet Not applicable for this booklet

12
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-8. Location of PANEL Hook

24”

Not applicable for this manual

22” 26”

13
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-9. Location of BRACKET, PANEL

BRACKET, PANEL on bezel assembly for panel is put in as below

32” 40”

BRACKET, PANEL (H) BRACKET, PANEL (H)

2position 2position

BRACKET, PANEL (C) BRACKET, PANEL (C)

3position 4position

37” 46”

BRACKET, PANEL (H) BRACKET, PANEL (H)

2position 2position

Not applicable for this booklet

BRACKET, PANEL (C) BRACKET, PANEL (C)

4position 6position

14
Safety Notes KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

1-7-9. Location of BRACKET, PANEL

55”

BRACKET, PANEL (M)

15position

Not applicable for this manual

BRACKET, PANEL (C)

60”
BRACKET, PANEL (H)

BRACKET, PANEL (M)

15position

Not applicable for this manual

BRACKET, PANEL (M)

15
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
SECTION 2 KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
SELF DIAGNOSTIC FUNCTION RM-GD020

2-1. Overview of Control Buttons 2-2. LED Display Specification

LED Type Description Remark

1 Power
Green: LED Green lights at Pow er On.
POWER
Red : LED Red lights w hen recording (Japan and Europe models only)

STANDBY Red:One LED Red lights during standby

2 Program
Orange/Green:
Timer/ Pic Off Green Lights during Picture Off and Orange Lights during Timer Activation.
Tw o LEDs

3 Volume

2-3. LED Display Control

Pic off /
4 Input Select/ Status Connecting / Standby Pow er/REC Blinking Pattern
Enter
Timer
5 Home
POWER ON Off Off Green

Standby
Off Red Lit Off
(by Remote Control Off)
Refer to Blinking
Self Diagnosis Off Red Blink Off Pattern of Self
Diagnosis Mode
End of the Aging Mode Off Off Green Blink 3sec On / 3sec Off
0.5sec On / 0.5sec
Aging Mode Off Off Green Blink
Off
Softw are Updating Orange Blink Red Lit Off 5sec On / 1sec Off

Softw are Update Finish Orange Lit Off Green Lit

Test Reset Orange Lit Red Lit Green Lit

0.5sec On / 0.5sec
Error on Panel ID Orange Blink Off Green Blink
Off
(REC)(Sleep Timer)(Pow er
Orange Off Red
ON)
(Picture Off) (On Timer)
6 7 8 9 Green Off Red
(REC) (Pow er On)
Remote Picture Off/Standby Power
Sensor Timer Indicator Indicator

16
Self Diagnostic Function KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

2-4. LED Pattern 2-5. Standby LED Error Display

When safety shutdown occurs, Standby LED display reports the cause by using
the lighting patterns as indicated below. Blinking
Error Countermeasure t o replaced either / all
Times

Power Supply Board

2 Main Power Error
Main Board

Main Board / DC Alert

3 Main Board
Error / Audio Error

Balancer Error / M M
Example:The figure above shows LED display when SHUTDOWN is caused by 4 Not applicable for this manuall
SPI Error / VLED Error
Balancer Error. It repeats flashing for a specified number of times in 0.5sec/cycle
and has a 3 seconds interval of lighting off. Please note that a 3 second interval
of lighting off is fixed regardless of abnormal state types. Tcon Error / HFR Error /
Not applicable for this manuall
FRC No
5
Tcon
Panel ID NVM Error
Panel Module

Power Supply Board

6 Backlight Error Main Board
Panel

7 Temperature Error Main Board

Main Board
8 Software Error
Wif i (Not applicable for this manual)

9 Reserved Reserved

Emitter Board Power

10 Not applicable for this manual
Error

17
 Self Diagnostic Function KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
2-6. Triage Chart

Symptoms - Shutdown. Power LED Green LED No Video

blinking red diagnostics sequences Blinking Power - missing or distorted Remote Network Audio Skype
Skype
Reference Stationary
Green LED colored No video
non-stop No Green Power lines or One of No video Wireless Skype
2 3 4* 5 6 7 8 10 ** Blinking LED (Dead Set) dots Inputs all Inputs No Remote can't connect No Audio Can't W ork
B* BOARD ▲ l ▲ ▲ ▲ l l ▲ ▲ ▲ l l ▲ ▲ l ▲
G* BOARD l ▲ ▲ ▲ l ▲ l ▲
H* BOARD（IR） ▲ l l
RF Module（RF） l **
SPEAKER ▲ l
Skype Module l
Wifi Module l** l ** ▲
LD B OARD** l ▲
LVDS CABLE ▲ ▲ ▲ ▲
TCON l ▲
LCD Panel l l ▲ l l
PANEL PANEL
POWER POWER POWER (TCON) (Backlight) TEMP EMIT-TER
FAN
Problem
AUDIO (N/A)

D oubtful Part
Few Possibility
* Not applicable for this manual
**
Segment Size B* Board G* Board H* Board
Type Type Type
P-1 22 BAT-S G1A HLR2
P-1 26 BAT-S G1B HLR2
P-1 32 BAT-V GE2A HLR2
P-1 40 BAT-V GE3A HLR2
P-1 46 BAT-V GE3A HLR2

18
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
SECTION 3 KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
TROUBLESHOOTING
3-1. Power Problem 3-2. Standby LED Blinking
3-2-1. 2-times blinking (Main Power Error)

No Power

2-times blinking
SW OFF
Check
Turn on the Switch
*Power Saving Switch

Check REG12V at NO 12V Replace the Harness

SW ON NG
pins 2/3 of CN6001 on Between G* Board and G* Board
the B* Board B* Board

Check STBY 3.3V Replace the Harness

NG NG
at 10 pin of CN6001 Between G* Board and G* Board 12V OK Symptom
on the B* Board B* Board improvement
B* Board
Symptom Harness
improvement
OK
Harness

B* Board Note: B* and G* Board

Segment Size B* Board Type G* Board Type
22 BAT-S G1A
26 BAT-S G1B
*Power Saving Switch：Only for BAT-L model
P-1 32 BAT-V GE2A
(2b-1,2b-2,3a-1)
40 BAT-V GE3A
46 BAT-V GE3A

19
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-2. 3-times blinking( DC Alert & Audio Error)

AUDIO
3-times blinking Check AUDIO
+12.5V at pin 8/9 of NG
DC_ALERT G* Board
CN6001 on
the B* Board

Check D+1.2V at NG F6001,IC6005,etc

JL6007 OK
(B* Board)
on the B* Board

Check +12.5V
NG F4601,IC4601,etc
OK at F4601 on
(B* Board)
the B* Board

Check +3.3V_MAIN NG F6003,IC6003,etc

at JL9234 on OK
(B* Board)
the B* Board
IC4601,etc
(B* Board)
OK

AUDIO
Check NG
Speaker Impedance Speaker Note: B* and G* Board
at SP Connector
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
OK
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A

20
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-3. 4-times blinking (LED Error)(Not applicable for this manual)

4-times blinking

Check
PANEL_FAIL at Below 0.84V
B* Board
JL6017
on the B* Board

Between 0.84V to 2.65V

Symptom
improvement
Change G* Board G* Board

NG

Symptom
Change LED improvement
LED Driver Board
Driver Board

Panel

21
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-4. 4-times blinking (Including SPI Error) (Not applicable for this manual)

4-times blinking

Symptom
Check Below 0.84V improvement
PANEL_FAIL at
B* Board
JL6017 Change T-CON Board T-con Board
on the B* Board

Between 0.84V to 2.65V

Symptom NG
improvement
Change G* Board G* Board Symptom
improvement
Change
LED Driver Board
LED Driver Board
NG

Check the harness between NG

the T-con board and Panel
the LED driver board, Harness
between the G board and
the LED driver board.

22
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-5. 5-times blinking (T-con Error) (Not applicable for this manual)

System
5-times blinking Improvement

RGB sensor change RGB sensor

Check PANEL_VCC (b) Only for Y* models

at pin 1 of NG
G* Board
CN6001 on
on the B* Board

about 5V ： 22 Model
about 12V : ex. 22 Model OK
NG
Panel (T-con)
B* Board
Symptom change
improvement
Replace the Harness
Harness
Between G* and Panel (a)
Symptom
improvement
NG
Panel (T-con)
Symptom
Replace improvement
LVDS Harness
the LVDS Harness

NG

(a) exclude 60Hz Panel Model

23
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-6. 6-times blinking (Backlight Error)

6-times blinking

under
Check
2.65V
BL_ERR at
B* Board
pin 7 of CN6002
on the B* Board

Over 2.65V

Symptom
improvement
Change G* Board G* board

NG

Panel Note: B* and G* Board

Segment Size B* Board Type G* Board Type

P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A

24
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-7. 6-times blinking( Backlight Error)(Not applicable for this manual)

6-times blinking

Symptom
Change LED driver improvement
LED Driver Board
board
Check the harness between NG
the T-con board and Harness
the LED driver board. NG

Symptom
OK
Change B* improvement
board B* Board
Symptom
improvement
Change G* board G* Board

NG
Light Source
(Inside Panel Module)

Check FFC connection between NG

the LED driver board and
FFC Connection
the light source
(inside the panel module)

OK

25
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-8. 7-times blinking (Temperature Error) 3-2-9. 8-times blinking (Software Error) (Not applicable for this manual)

7-times blinking 8-times blinking

Setting Circumstance If the Symptom NG

No Set to another
Is OK? Temperature, Improved by changing B* Board
location, etc.
Ventilation, etc. the WIFI module

Yes Symptom
improvement

Change B* Board, NG
Panel WIFI Module
and Aging a few hours

Symptom
improvement

B* Board

Note: B* Board
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V

26
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-2-10. 10-times blinking (Emitter error) (Not applicable for this manual) 3-3. Power (Green) LED Blinking
3-3-1. Non-Stop blinking (Power (Green) LED)

POWER (Green) blinking

10-times blinking

Check
the harness between NG
Check harness
the G* board and
the harness between NG
the T-con board and harness Panel
the HEM2 board
OK
OK NG
Check Panel Panel
NG
Change HEM2 Board T-CON board
OK

Symptom
improvement NG
Check G* board G* Board

HEM2 Board
OK

B* Board

Note: B* and G* Board

Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A

27
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-4. No Picture
3-4-1. Except HFR Model

No Picture about 5V ： 22”(WXGA)Model

about 12V : ex ： 22”(WXGA)Model

BL_ON：H
Check
Press HOME Key. No Yes Check
PANEL_VCC Replace NG LCD Panel
XMB（Menu） BL_ON at JL6018
at JL6004 the LVDS Harness (T-con)
displayed? on the B* Board
on the B* Board

Yes No BL_ON：L Symptom

improvement
B* Board G* Board Harness
(LVDS)
Symptom
Replace Harness improvement Harness
(Between G* Board
（G* to B*)
to B* Board)

NG

NG
Note: B* and G* Board Change B* Board) G* Board

Segment Size B* Board Type G* Board Type

P-1 22 BAT-S G1A Symptom
improvement
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A B* Board
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A

28
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-4-2. HFR Model

No Picture

No OK Replace NG NG
Press HOME Key. Check the G*- LD**
the B-Tcon, Tcon-LD** Change B* Board
OSD displayed? Harness
FFC

Yes NG Symptom Symptom

improvement improvement
B-Tcon, Tcon-LD**
B* Board Harness B* Board
FFC

NG
LCD Panel
Change G* Board
(T-con, LD**)
Note: B* and G* Board

Segment Size B* Board Type G* Board Type

Symptom
improvement P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
G* Board
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
Tcon-LD** - not applicable for this this model

29
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-5. No Sound 3-6. TV Commander & Keys Malfunction

3-6-1. TV key Malfunction

No Sound
Button malfunction
on the TV

Audio System
Symptom
Check the Change to improvement
Speakers setting TV Speaker Replace the harness NG
between B* Switch Unit change Switch Unit
to Switch Unit
TV Speakers
Symptom
NG
improvement Symptom
improvement
Change the Speaker NG Replace B* Board
B* Board
Harness the B* Board
Harness

Symptom
improvement NG

Speaker Harness Speaker

Note: B* Board
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V

30
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-6-2. IR Remote Commander Malfunction

TV isn’t controlled
by remote commander

OK Green LED blinks at power indicator OK

Green LED light Mechanical
when using commander
at power indicator (ex. bezel)
near sensor’s window

NG NG

Check the Harness OK

between the B* Board Sensor is broken
and the HLR Board

NG
Symptom
improvement
Exchange Harness Harness

NG
Symptom Note: B* Board
improvement
Exchange HLR board HLR board Segment Size B* Board Type
22 BAT-S
NG
26 BAT-S
B* board P-1 32 BAT-V
40 BAT-V
46 BAT-V

31
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-6-3. RF Remote Commander Malfunction (Not applicable for this manual)

Commander
malfunction

NG NG Use new remote NG

Re-Pairing action Use new batteries
and new batteries

Symptom improvement Symptom improvement Symptom improvement

RF remote commander is
Un-registered Batteries low power Remote

Note: B* Board
Replace the Harness NG NG
Replace
between the B* Board B* board
the RF Module
and the RF Module

Symptom Symptom
improvement improvement

Harness RF Module

32
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-7. Network Malfunction

3-7-1. Wired Network Malfunction

Wired Network
on the TV

Connection result OK Connection result OK Connection result

Cable Connection Local Access Internet Access

NG NG NG

Proxy setting
OK Auto Check Local
Check cable B* board Wired Set-up
router
IP address setting
DHCP server

NG
Manual

Ethernet Cable
Note: B* Board
Check IP address
& Segment Size B* Board Type
Local router setting
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V

33
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-7-2. Wireless Network Malfunction

3-7-2-1. Internal Wireless Network Malfunction 3-7-2-2. USB Wireless Network Malfunction

Wireless Network Wireless Network

on the TV on the TV

Error Message
No Is the radio field No Error Message appear Is the radio field
appear when the No No
Strength too weak B* Board when the Wireless Strength too weak B* Board
Wireless Network
or even No signal? Network is selected? or even No signal?
is selected?

Yes Yes Yes Yes

Wireless Module, Harness Access Point USB Dongle Access Point

Note: B* Board

Segment Size B* Board Type

P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V

34
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-8. Camera Malfunction

Enter
Presence sensor
settings

Error Message appear No Is image is clear on No Module optical problem

when the Presences setting menu
(change module)
Sensor setting? at module unit only?

Yes Yes

Module, Harness Mechanical Problem

Setting Menu

Error message

image

Presence Sensor Setting:

Press HOME, then select > System Settings > Eco > Presence Sensor

35
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-9. 3D Malfunction (not applicable for this manual)

3D malfunction

Check
IR has been output Yes whether there is No Yes
Is 3D glasses
on HEM2 board, interception thing 3D glasses
power on?
during 3D displaying. between Emitter
and glasses.

No Yes No

Power on
Change
or
Watching environment
Charge battery
NG
Replace HEM2 board
[How to confirm IR-output.]
ex) Look IR-LED through CCD/CMOS camera.
Symptom
improvement

HEM2 Board Panel (T-con)

36
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-10. HDD-Rec MALFUNCTION

HDD Rec
Malfunction

HDD is connected No Connect to the

to the appropriate
appropriate port
USB port?

Yes

USB Hub is inserted No Is the drive size larger No Only 32GB~2TB

in between the than 32GB and
is supported
USB port and HDD? Smaller than 2TB??

Yes Yes

USB Hub is
NOT supported All the setups and No
restrictions listed in Check the iManual
iManual are cleared?

Yes

B board

37
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-11. Skype Trouble Shooting Flow

Problem!

Is it Skype NO
Buy ready TV
ready TV?

YES

Do you have NO
Buy CMU-BR100
CMU-BR100?

YES

USB NO
Insert USB
plugged?

YES
Insert other CMU-
NO -Unplug other BR100 or USB
Able to run
USB device. dongle.
Skype App?
-AC Off/On Change USB port.

YES
NO
NO NO Works? Repair BAT PWB
Able to run Able to run
Continue to next Skype App? Skype App?
page YES
YES YES
CMU-BR100 is NG.
Spec. USB overload. Repair BAT PWB Swap to new one.

38
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

3-11. Skype Trouble Shooting Flow (continue from previous page)

Far end
Move unit away setting/system.
from speaker.
OK

CMU-BR100 NG NG
Test again. Call Skype
is NG. sound test.
Continue from
previous page Sound quality?

Sound quality?
No video?
Network NO
Do network setup No video
connected?

YES Enough
Far end Auto-Focus NO NET speed?
NO
PIC/AUD doesn’t
quality? work?

YES YES
Yes
Network speed. Manual NO CMU-BR100 is NG.
Or Far end system Focus work? Swap to new one.
issue.
YES
SPEC. Focus area.

39
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
3-12. Troubleshooting Reference KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
3-12-1. BAT-S ( A Side) (22, 26EX420, 22, 26EX423)
Note: Refer to each Troubleshooting Parts Parts PWB Drawing Parts Location
for details information. Location

A CN6001
BAT-S < A Side> i) Pin 1
ii) Pin 2
iii) Pin 3
CN6001
iv) Pin 8
v) Pin 9
vi) Pin 10

Pin 3
Pin 9 Pin 2 Pin 1

B Pin 10 Pin 8
A

A B CN6002 Pin 7
i) Pin 7
DC CN6002

E
BAT-S

C F6001

F6001

F6003
D F6003

IC6003 IC6003
E

40
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
3-12-2. BAT-S ( B Side) (22, 26EX420, 22, 26EX423) RM-GD020

Parts Parts PWB Drawing Parts Location

Location
BAT-S

BAT-S
IC6005
< B Side> B C
A
F D

B
*JL6004
G

D JL6007 c
C E E

JL6004 IC6005 JL6007

H
*JL6017
F (near
Parts Parts PWB Drawing Parts Location F4601)
Location
*JL6018 JL6017

G (near
F4601)
JL6018
A F4601 c IC4601

B IC4601

*JL9234
H (near
JL9234
F4601 CN9003)

CN9003

Note: Parts marked (*) Refer to 3-11-3 for ( Alternative Location) information .

41
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
3-12-3. BAT-S ( Alternative Location) (22, 26EX420, 22, 26EX423)

Parts PWB Side Alternative Location PWB Side PWB Drawing Parts Location

JL6004 B Side CN6001 A Side

Pin 1 :
T-CON_VCC CN6001

Pin 1 : Alternative location

for JL6004
JL6017 B Side CN6002 A Side Pin 7 :
Pin 7 : BL_ERR Alternative location
for JL6017

Pin 6 :
Alternative location
for JL6018
CN6002

JL6018 B Side CN6002 A Side

Pin 6 :BL_ON

42
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
3-12. Troubleshooting Reference
3-12-4. BAT-V ( A Side) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523) KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
Note: Refer to each Troubleshooting for details information.

BAT-V < A Side>

Parts Parts PWB Drawing Parts Location
A Location

C E CN6001
D C
i) Pin 1
F ii) Pin 2 Pin 1
iii) Pin 3 Pin 2
iv) Pin 8 Pin 3
v) Pin 9
vi) Pin 10 CN6001

B
Pin 8

Pin 9

Pin 10

F6001
D F6001
Parts Parts PWB Drawing Parts Location
Location

CN6002
i) Pin 7
A

Pin 7
CN6002
IC6003
E
IC6003

B F4601
CN5006
F F6003

F6003
F4601

43
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
3-12-5. BAT-V ( B Side) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523) RM-GD020

BAT-V Parts Parts PWB Drawing Parts Location

E F Location
< B Side>
B C B
IC6005

D
IC6005

C *JL6004

JL6004

JL6004
Parts Parts PWB Drawing Parts Location
Location

A IC4601
D JL6007 IC6005

IC4601 IC4601

JL6007

Note: Parts marked (*) Refer to 3-11-3 for ( Alternative Location) information

44
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
3-12-5. BAT-V ( B Side) (continue from previous page) 3-12-6. BAT-V ( Alternative Location)
(32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)

Parts Parts PWB Drawing Parts Location Parts PWB Alternative PWB PWB Drawing Parts Location
Side Location Side
Location

JL6004 B CN6001 A
E *JL6017 Side Pin 1 : Side Pin 1 :
T-
CON_VCC

CN6001

F *JL6018
JL6018
JL6017

JL6017 B CN6002 A
Side Pin 7 : Side
BL_ERR

G *JL9234
(near JL6018 B CN6002 A
CN9003) Side Pin 6 Side
:BL_ON
Pin 6 :
CN9003 Alternative
location
for JL6018

Pin 7 : CN6002
Alternative
location
for JL6017

JL9234
JL9234

Note: Parts marked (*) Refer to 3-11-7 for ( Alternative Location) information

45
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

SECTION 4
SERVICE ADJUSTMENT
4-1. Accessing Self Diagnostic Menu

1. While LCD TV set is on standby mode, press the following 3. To Reset Panel Operation Time (Applicable Only when Panel is replaced):
sequence on the Remote Commander key. (RM-GD020) Press < 7 >  < 0 > key
< i+>  <5>  <Vol Down>  <TV Power>

TV Power
SELF CHECK <1> NEXT PAGE->
SELF CHECK <1> NEXT PAGE->
000 RGB_SEN 00
000 RGB_SEN 00
002 MAIN_POWER 00 Indicating error
002 MAIN_POWER 00
003 DC_ALERT 00 detected.
003 DC_ALERT 00
(i+ ) 003 AUD_PROT 00
003 AUD_PROT 00
003 DTT_WDT 00
003 DTT_WDT 00
004 BALANCER 00
004 BALANCER 00
005 HFR_ERR 00
005 HFR_ERR 00
5 005 TCON_ERR 00
7 005 TCON_ERR 00
005 P_ID_ERR 00
005 P_ID_ERR 00
006 BACKLITE 00
006 BACKLITE 00
007 TEMP_ERR 00 0
Vol Down 007 TEMP_ERR 00
007 FAN_ERR 00
007 FAN_ERR 00
010 EMITTER 00
010 RESERVED 00
011 RESERVED 00
011 RESERVED 00 Panel Operation
012 1A 00 Time
12345-67891-23456
101 VPC-WDT 00
Remote Commander 102 MEPS-WDT 00
Remote Commander
103 HOST_WDT 00 Diagnosis Menu Sample
12345-67891-23456

Diagnosis Menu Sample

2.To Reset Error Count & Error History: Press < 8 >  < 0 > key 4.To exit, turn the power off using Remote Commander key.

46
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-2. Accessing Service Mode 4-3. Transition of each module in service mode
While LCD TV set is on standby mode, press the following sequence on the 1. There are 3 modules in Service Mode:
Remote Commander key. < Display>  <5>  <Vol Up>  <Power> a) Chassis
Service Mode 1
b) VPC
TV Power c) Digital Service Mode 2
2. Digital Service Mode will be appeared first whenever entering Service Mode.
3. To changed the module, please press either OPTION or JUMP key on the
remote commander.
i+

Vol Up
Options

Remote Commander
Service Menu Sample Jump
For Main CPU
DIGITAL SERVICE
Host CPU main program 001 OP
version
000 VERS ---
VPC FW version
<MAIN> <EXT> Additional modules
Vendor FW version RF module program version
DM1.301W00AA RF:01.05
Standby CPU program WF1.003W00AA WF:2.0.0.99 FW version of Wifi module
version Remote Commander
DF1.001W00AA WF:0B Data version of Wifi module
Boot program version (Country code)
YM1.010W00AA CAM:X.XXX
MP release Host DB2.105W00AA FD:XXXX Fennel Core Flash Data version
program version
(DM1.301W00AA) 000-255 (1Byte) version
NVM Data version data is for Fennel core.
DD1.016W00AA
Pack Data version WP0.521W00AA <PEM> Panel Micro
Model ID MID:1C117081 PM1.012W00LU Main program version

PID:04020000 PB1.000W00LU Boot program version

Product ID
PNL:LTY320AB01 PL1.011J46LUX Boot Loader version
Panel ID (Title)
POP:X.XXX PD1.011J46LUX NVM Data version

47
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-4. Change data by Service Mode 1 (Chassis and VPC module)

1. To change category, item and data in CHASSIS or VPC service mode: 2. To save changed data in Service Mode 1
a. Press key 2 or 5 on remote commander to select (up or down) category. a. Press key Mute on remote commander. It shows green SERVICE changes
b. Press key 1 or 4 on remote commander to select (up or down) Item. to green WRITE.
c. Press key 3 or 6 on remote commander to change(up or down) data. b. Press key 0. Green WRITE changes to red WRITE. It indicate writing is
processing.
Remote commander key : 1, 2, 3 is for increment c. After a while, red WRITE changes to green SERVICE. Writing process is
Remote commander key : 4, 5, 6 is for decrement done at this point.
3. TV reboot is necessary for applying data change.

(a) Indicate saving

(b) Changing category process
Changing Item
CHASSIS WRITE
000 WYVERN
CHASSIS SERVICE 000 S2_NOISE_TH 32
000 WYVERN
000 S2_NOISE_TH 32
a
c CHASSIS Service Menu Sample
b CHASSIS Service Menu Sample

(c)
Changing data b
a

Remote Commander

Remote Commander

48
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-5. Change data by Service Mode 2 (Digital Service Mode)

4-5-1. Change data for all Except 003 DIG_SRV_MODE 4-5-2. Change data for 003 DIG_SRV_MODE

To change category, item and data in DIGITAL service mode (except 003 To change item and data in DIGITAL service mode (003 DIG_SRV_MODE
DIG_SRV_MODE category): category):
a. Press key 2 or 5 on remote commander to select (up or down) category. Please note because this operation is special.
b. Press key 1 or 4 on remote commander to select (up or down) Item. a. Press key 2 or 5 on remote commander to select 003 DIG_SRV_MODE.
c. Press key 3 or 6 to change (up or down) data. b. Press key 1 or 4 on remote commander to select (up or down) Item.
c. Press key 0 or 10 on remote commander to select item.
Remote commander key : 1, 2, 3 is for increment d. Press key 1~9 on remote commander directly. Star (*) mark will move
Remote commander key : 4, 5, 6 is for decrement accordingly.
e. Press key ENTER or SELECT to decide and advance next step.
No need to save for Digital Service Mode (except for 002 MODEL & 005 Press Remote Commander key RETURN to return to the previous page.
CHPRESET category)

DIGITAL SERVICE
003 DIG_SRV_MODE
000 TEST_PATTERN ---
e
a c DIGITAL SERVICE
b 004 TUNER
000 !A_NOSIG_DET 001 d

DIGITAL Service menu sample

DIGITAL(DIG_SRV_MODE) SERVICE
c TEST_PATTERN
e
*1 Video
6 2 Audio

DIGITAL Service menu sample

Remote Commander Remote Commander

49
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-6. White Balance Adjustment

4-5-3. Save changing data by Service Mode 2 (for 002 MODEL category)
1. This is only required only when B Board is replaced. To access to White Balance Service mode, choose VPC Service Mode.
2. Items in Digital service mode for 002 MODEL category. a. Press key 1 or 4 on remote commander to select WB adjustment menu.
000 SEG ・・・Select segment information 006 WB category will be seen on the menu.
001 DEST・・・Select destination information b. Change data by pressing 3 or 6. Each range of these items is 0~255.
002 MODELNAME ・・・ Select Model Name c. Press mute ＋ 0 on remote commander to save the data.
003 SERIAL ・・・Can be set Only Once for the new board SERVICE comment is changed to WRITE, indicating writing process.
3. To change category, item and data : d. After a while, WRITE comment returns to SERVICE, which means
a. Press key 2 or 5 on remote commander to select (up or down) category. writing process is done. (takes about a couple of seconds)
b. Press key 1 or 4 on remote commander to select (up or down) Item.
c. Press key 3 or 6 on remote commander to change (up or down) data.
Remote commander key : 1, 2, 3 is for increment
Remote commander key : 4, 5, 6 is for decrement
4. Press key mute +0 on remote commander . It shows red WRITE.
VPC SERVICE VPC SERVICE
5. After a while, red WRITE dissapears. Green DONE will be displayed.
006 WB 006 WB
6. For the item SEG, DEST MODELNAME, after changing each item, service
000 R_DRV 003
128 R_BKG 128
save(mute+0) is needed. For the item SERIAL, after inputting the serial
number, press key 12 or Enter, the serial data will be saved. b
VPC SERVICE VPC SERVICE
7. Please save the item SEG, DEST, MODELNAME
sequentially. SEG→ DEST→ MODELNAME a 006 WB 006 WB

8. When Saving the item "SEG", sometimes instead of 001 G_DRV 004128 G_BKG 128

"Writing", word "Pending" will appear. In this case, skip the

"SEG", save the "DEST" and "MODELNAME" is OK. VPC SERVICE VPC SERVICE
006 WB 006 WB
c 002 B_DRV 005128 B_BKG 128

a DIGITAL SERVICE
002 MODEL VPC Service menu sample
000 SEG I-1
Write
b Remote Commander
DIGITAL Service menu

Remote Commander

50
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-7. Restore WB / Gamma adj-data to B board. 4-8. Change the emitter output level (Applicable only for TD model).
1. Purpose to reduce the emitter LED output power strength.
In VPC service mode:
a. Select 000 DATA_COPY category by pressing key 2 or 5 on remote 2. Select VPC service mode and then press:
commander. a. Select 005 TD category by pressing key 2 or 5 on remote commander.
b. Change data from 0 to 1 by pressing key 3 or 6 on remote commander. b. Select 000 EMIT_STR item by pressing key 1 or 4 on remote commander.
c. Wait until data is changed from 1 to 3. c. Change data from 0 to 1 by pressing key 3 or 6 on remote commander.
d. When data is changed from 1 to 3, restoring process is finished. 0: Strong (Default)
e. In case data is changed from 1 to 2, keep default setting. 1: Weak
(No more process is needed.) d. Save by pressing Mute & 0 or 10 & Reboot.

VPC SERVICE VPC SERVICE VPC SERVICE

000 DATA_COPY 000 DATA_COPY 005 TD
000 BU_TRANS 1 000 BU_TRANS 3 000 EMIT_STR 1
a
b
DO NOT POWER OFF Sub Service menu
DO NOT TOUCH ANY KEY NOW DATA TRANSFER SUCCESS b c

a
Restore process menu sample End restore process menu
sample

Remote Commander

Notes: Remote Commander

1. This restoration should be applied after USB-DL being assembled when
B Board is replaced.
2. This process only applicable for 120Hz / 240Hz models only.

51
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-9. Viewing VCOM Test Pattern

4-9-1. Step 1 4-9-3. Step 3
To access VCOM Step 1, please select Digital Service Mode first To access VCOM Step 3, please select VPC Service Mode.
a. Select 003 DIG_SRV_MODE category by pressing key 2 or 5 on remote a. Select 002 VCOM category by pressing key 2 or 5 on remote commander.
commander. b. Select 001 ADJUST item by pressing key 1 or 4 on remote commander.
b. Press key 0 on remote commander to go to TEST PATTERN Mode. c. Change data by pressing key 3 or 6 on remote commander.
c. Press key Enter or 1 or 2 on remote commmander to go into Video TEST d. Finish the adjustment when the picture seems OK.
PATTERN.
PQP SERVICE
d. Press key 7 or 8 on remote commander to select the test pattern
e. Press key Enter or Select on remote commander twice to show the VCOM 002 VCOM
TEST PATTERN. 001 ADJUST 0

DIGITAL (DIG_SRV_MODE) SERVICE

VCOM Test Pattern Step 3 menu sample
TEST PATTERN
--> 1 Video

＊1 White
2 Ramp
3 R Raster
4 G Raster
5 B Raster
6 Color Bar 4-9-4. Step 4
7 VCOM Pattern1
8 VCOM Pattern2 To access VCOM Step 4, please select Digital Service .
9 Oｆｆ
a. Select 007 VCOM category by pressing key 2 or 5 on remote commander.
Please input a white level. b. Change data from 1 to 0 by pressing key 3 or 6 on remote commander.
(00-10)
__ c. Confirm the final result of the VCOM adjustment .
d. If OK, Finish the VCOM adjustment. If NG, pressing key 3 or 6 to show
VCOM Test Pattern Step 1 menu sample the OSD again and go back to VCOM adjustment STEP3
4-9-2. Step 2 DIGITAL SERVICE

To access VCOM Step 2, please select VPCService Mode first 010 VCOM
000 SRV_OSD_EN 1
a. Select 002 VCOM category by pressing key 2 or 5 on remote commander.
b. Select 000 ENABLE item by pressing key 1 or 4 on remote commander.
c. Change ENABLE from 0 to 1 to enable VCOM adjustment. VCOM Test Pattern Step 4 menu sample

PQP SERVICE

002 VCOM
000 ENABLE 0

VCOM Test Pattern Step 2 menu sample

52
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-10. Set to Shipping Condition 4-11. Remote Commander Function

4-10-1. Option 1 (By Accessing to Service Mode)

a. Move to Digital service mode.

b. Press 8 on remote. Function The flow of control
It shows green color letter SERVICE changes to green color
Service mode on <Test>+<TV>/<Display><5><Vol Up><Power>
letter RST-.
c. Press mute on remote. Service mode off <Other> / <Power off + on>
Added green color letter EXE after green color letter RST- . Item up / down <1>/<4>
d. Press 0 on remote. Green color letter RST-EXE changes to
Category up / down <2>/<5>
red color letter RST-EXE. It indicated writing is in process.
e. After a while, red color letter RST –EXE changes to green Data up / down <3>/<6>

b color letter SERVICE. And all LED lights. Test reset <8> + <Mute> + <0>
Writing process is done at this point.
Execute <10 or 0>
c d
Write data <Mute> + <0>
Change module <Jump> / <Option>

TIMER Standby POWER

Remote Commander

4-10-2. Option 2 (Without accessing to Service Mode)

Without accessing to Service Mode, shipping condition still can

be set by pressing remote commander key:
-> Cursor Up on remote + Power Key on Front panel

53
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-12. Index Flow of Service Control

4-12-1. Digital Service Mode 4-12-2. VPC Service Mode
001 OP 000 DATA_COPY………………WB Data Save Function
000 VERS…………………….Software version 000 BU_TRANS

002 MODEL 001 DATABACKUP…………….No use for Service.

000 SEG ……………………..Select segment information <omission>
001 DEST…………………….Select destination information
002 MODELNAME …………..Select Model Name 002 VCOM ………………………VCOM Adjustment Function.
004 SERIAL ………………….Can be set Only Once for the new board 000 ENABLE
001 ADJUST
003 DIG_SRV_MODE
000 TEST_PATTERN……….EMMA Test Pattern 003 SG_EP …………… ………..No use for Service.
001 MONITOR_MODE………Tuner Monitor <omission>
002 FACT_SETTING………..Factory shipment settings
<omission> 004 MEASURE …………… ……No use for Service.
<omission>
004 TUNER
000 A_NOSIG_DET………….Analog-RF No signal detection 005 …………… ……….……….. Emitter Strength setting Function.
001 SCAN_COPY……………Copy the scan data to USB. 000 EMIT_STR
<omission>
006 WB …………… …………… W/B adjustment
005 CHPRSET…………………………For factory use only. <omission>
<omission>
007 GAISO …………… .. …….. Change RGB sensor setting by bezel color.
006 RFRC Mode……………………. Service item for RF Remote Commander 000 GAISO
<omission>

007 VCOM…………………………… Service item for VCOM Adjustment

<omission>

008 WIFI …………………………….…Service item for WIFI (only WIFI model)

<omission>

54
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

4-12. Index Flow of Service Control

4-12-3. Chassis Service Mode

000 WYVERN
<omission>

001 TUNING
<omission>

002 D_DEMOD No use for Service.

<omission>

003 SATELLITE
<omission>

004 HDMI
000 FORCE_ARC

005 AUDIO
000 MPEG_LV …Level OFFSET for MPEG1-L1/L2.
001 HEAAC_LV …Level OFFSET for HE-AAC.

005 TEMPSEN …………….. No Use for Service

<omission>

55
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
SECTION 5 RM-GD020
DIAGRAMS
5-1. BLOCK DIAGRAM
5-1-1. BAT-V BOARD ( KDL-32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)

56
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-1-2. BAT-S BOARD (KDL-22, 26EX420, 22, 26EX423 (EXCEPT HONGKONG AND TAIWAN MODEL))

One NAND
DDR3 DDR3
1Gb/2Gb 1Gb/2Gb
2Gb USB2.0

ATREYU

60Hz CCFL USB

/ HUB
LVDS
60Hz LED

RGB

IIC

Temp.
Sensor

TS

IIS
TMDS

Audio
RMII
AMP
HDMI
Ether
EQSW
YCbCr /
PHY
TS TS CVBS
SEKITO2 GAIA
CVBS
(DVB-S2 Demod) (DVB-T2 Demod) PWM
GPIO
UART
IF SIRCS
IF IF GPIO
HORUS ASCOT2Ssip IIC HP / LINE
Ladder OUT
(Si Tu- S) (Si Tu- T)
Audio
L/R
L/R L/R L/R
ATV Sub AMP TMDS TMDS PC AUDIO
SPDIF (Shared w/ HDMI)

58
Key (Normal) Lumi Sensor Human Sensor IR Remote Rx LED

57
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-1-3. BAT-S BOARD (KDL-22, 26EX420 (HONG KONG MODEL))

One NAND
DDR3 DDR3
1Gb/2Gb 1Gb/2Gb
2Gb USB2.0

ATREYU

60Hz CCFL USB

/ HUB
LVDS
60Hz LED

RGB

IIC

Temp.
Sensor

TMDS

IIS

Audio
AMP RMII
HDMI
Ether
EQSW
YCbCr /
PHY
TS TS CVBS
SEKITO2 ZHUI
CVBS
(DVB-S2 Demod) (DTMB Demod) PWM
GPIO
UART
IF SIRCS
IF IF GPIO
HORUS ASCOT2Ssip IIC HP / LINE
Ladder OUT
(Si Tu- S) (Si Tu- T)
Audio
L/R
L/R L/R L/R
CATV ATV Sub AMP TMDS TMDS PC AUDIO
SPDIF (Shared w/ HDMI)

59
Key (Normal) Lumi Sensor Human Sensor IR Remote Rx LED

58
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-1-4. BAT-S BOARD (KDL-22, 26EX420 (TAIWAN MODEL))

One NAND
DDR3 DDR3
1Gb/2Gb 1Gb/2Gb
2Gb USB2.0

ATREYU

60Hz CCFL USB

/ HUB
LVDS
60Hz LED

RGB

IIC

Temp.
Sensor

TS

IIS
TMDS

Audio
AMP RMII
HDMI
Ether
EQSW
YCbCr /
PHY
TS TS CVBS
SEKITO2 ZHUI
CVBS
(DVB-S2 Demod) (DTMB Demod) PWM
GPIO
UART
IF SIRCS
IF IF GPIO
HORUS ASCOT2Ssip IIC HP / LINE
Ladder OUT
(Si Tu- S) (Si Tu- T)
Audio
L/R
L/R L/R L/R
CATV ATV Sub AMP TMDS TMDS PC AUDIO
SPDIF (Shared w/ HDMI)

60
Key (Normal) Lumi Sensor Human Sensor IR Remote Rx LED

59
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-2. WIRE DRESSING

CAUTION : Connector
5-2-1. KDL-22EX420 , 22EX423 1. Do not overpull the wires during dressing --> avoid disconnection of wires.
2. Make sure wires are kept away from sharp edges, heat sinks & other high-temperature parts. Tape 60mm

2) Inserting Connector Assy 14P 3) Inserting Connector Assy 28P

Before inserting LCD Panel Bracket 1) Inserting Flexible Flat Cable
Please ensure that the Stamp
Mark side is at T-Con side. Insert
connector

Insert
After inserting LCD Panel Bracket connector
Insert connector

Insert tape

Insert connector Insert

connector

4) Inserting Harness Assy Insert connector

Insert tape
Insert tape

Please take caution:

i ) Confirm the connector is not loose.

Insert
connector
Insert tape

ii ) Insert the Harness wire according

to correct way. Insert tape Insert
connector

Insert tape Insert

connector Insert
connector

Insert connector

60
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-2-2. KDL- 26EX420, 26EX423

Connector
Tape 60mm

1) Inserting Flexible Flat Cable

2) Inserting Connector Assy 14P 3) Inserting Connector Assy 28P
Insert connector

Insert tape

Insert
connector
Insert connector
(after BAT-V
Board being
Insert connector
inserted)
4) Inserting Harness Assy Insert tape Insert tape
Insert connector
Insert tape Insert tape
Please take caution:
i ) Confirm the connector is not loose. Insert tape
Insert switch unit

Insert tape

ii ) Insert the Harness wire according

to correct way. Insert switch unit

Insert
connector
Insert
Insert connector
connector

61
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-2-3. KDL-32EX420, 32EX520, 32EX523

Connector
Tape 60mm

1) Inserting Connector Assy 14P 2) Inserting Flexible Flat 3) Inserting Connector Assy 28P
Cable Please insert
Insert tape Connector Assy
28P into the hook.

Insert connector Insert connector Insert connector

4) Inserting Harness Assy Insert tape Insert tape

Insert Insert connector
tape
Inserting Connector at Main Board
Please take caution: Please ensure that the wire did not cross
when inserting connector at Main Board.
i ) Confirm the connector is not loose.

Insert tape

ii ) Insert the Harness wire according

to correct way.

Insert tape

Insert connector

Insert tape

62
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-2-4. KDL-40EX520, 40EX523

Connector
Tape 60mm

1) Inserting Connector Assy 14P 2) Inserting Flexible Flat Cable 11 40s 3) Inserting Connector Assy 28P Insert tape

Insert tape

Insert
Insert connector
connector Insert connector

Insert connector
Insert tape

Insert connector

4) Inserting Harness Assy

Insert connector
Please ensure that the wire did
not cross when inserting
Please take caution: connector at Main Board.
i ) Confirm the connector is not loose.

Insert connector
ii ) Insert the Harness wire according Insert tape
to correct way.
Insert connector
Insert tape
Insert connector
Insert
tape
Insert tape

63
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-2-5. KDL-46EX520, 46EX523

Connector
Tape 60mm

1) Inserting Connector 2) Inserting Flexible Flat Insert tape 3) Inserting Connector Assy 28P
Cable Align the tape
with the LCD hole

Insert
connector
Insert tape
Insert
connector
Insert carefully at
Insert tape hook

Insert connector Insert connector Insert connector

4) Inserting Harness Assy Insert carefully at
Insert tape hook

Insert tape
Please take caution:
i ) Confirm the connector is not loose.

Insert tape Insert connector

Please ensure that the wire did
not cross when inserting
connector at Main Board.

ii ) Insert the Harness wire according

to correct way.

Insert tape

Insert connector
Insert connector

64
 30pin FFC
W/Plug Tcon side

FFC

HMS3 boaard BAT-S board B-WXGA panel WXGA Panel

JAM 3pin Straight
51pin
FPC
(Sumiden）
GND 1 30 NC 1 BD UART Rx/ BDR KEY2 /HLR DEVICE_SDA PANEL_VCC_SW 1 30 30 1 NC (Aging pin)
Diagrams

Motion Sensor MOTION_SENS 2 28 6 2 BDR STBY_+3.3V PANEL_VCC_SW 2 29 29 2 SCL

3a-X/V/2 REG+5V 3 29 4 3 BDR UART_Tx/ RF UART_TX PANEL_VCC_SW 3 28 28 3 SDA
P-1/2 1-821-130-11 5 4 BDR UART_Rx/ RF_UART_RX PANEL_VCC_SW 4 27 27 4 GND
1 5 BDR WAKEUP_STBY_MICON/RF SEL PANEL_VCC_SW 5 26 26 5 RX0-
2 6 BDR GPIO0/ RF_RST NC 6 25 25 6 RX0+
3 7 BDR GND GND 7 24 24 7 GND
SW modulle 5 8 WIFI GND GND 8 23 23 8 RX1-
GND 1 27 3 9 WIFI USB_P Panel_Ctrl9 / BINT 9 22 22 9 RX1+
SW module POWER_INT 2 25 1 10 WIFI GND NC 10 21 21 10 GND
ALL KEY1 3 26 BV - H Harness 4 11 WIFI USB_N Panel_Ctrl8 / PANEL_SEL 11 20 20 11 RX2-
1-822-693-11 H-B NC 12 WIFI GND GND 12 19 19 12 RX2+
2 13 WIFI VBUS PANEL_ODD3_P 13 18 18 13 GND
NC 14 HLR DEVICE_SCL PANEL_ODD3_N 14 17 17 14 RXCLK-
5 15 HLR LED_ON_TIMER GND 15 16 16 15 RXCLK+
HLR boardd 12 16 HLR SIRCS PANEL_ODD_CLK_P 16 15 15 16 GND
STBY+3.3V 1 23 4 17 HLR LED_STBY PANEL_ODD_CLK_N 17 14 14 17 RX3-
LED/IR/RGB Sensor/r/OPT_Sensor GND 2 21 6 18 HLR LED_POWER GND 18 13 13 18 RX3+
2b-3 LED_REC 3 19 3 19 HLR LED_REC PANEL_ODD2_P 19 12 12 19 GND
3a-V LED_STBY 4 17 7 20 HLR LED_PIC_MUTE PANEL_ODD2_N 20 11 11 20 PANEL_SEL
3a-2 LED_TIMER 5 15 2 21 HLR GND GND 21 10 10 21 SELLVDS(Default:VESA)
P-1 LED_POWER 6 18 10 22 HLR OPT_SENS PANEL_ODD1P 22 9 9 22 B-INT / WP
P-2 LED_PIC_MUTE 7 20 1 23 HLR STBY_3.3V PANEL_ODD1_N 23 8 8 23 GND
5-3. CONNECTOR DIAGRAM

DEVICE_SDA/GND 8 NC 11 24 HLR 3.3V GND 24 7 7 24 GND

DEVICE_SCL/LED_BD 9 NC 2 25 SW POWER_KEY PANEL_ODD0_P 25 6 6 25 NC(Open: Inside of panel)
OPT_SENS 10 22 3 26 SW_KEY PANEL_ODD0_N 26 5 5 26 VCC
VD+3.3V 11 24 1 27 SW GND GND 27 4 4 27 VCC
SIRCS 12 16 2 28 HMS DET /SONY LOGO Panel_Ctrl11 / SDA 28 3 3 28 VCC
1-821-139-11 3 29 HMS 5V /LOGO 5V Panel_Ctrl12 / SCL 29 2 2 29 VCC
1 30 HMS GND/ LOGO GND NC 30 1 1 30 VCC
5-3-1. KDL- 22, 26 EX420, 22, 26 EX423

CN9006 CN2000 Hirose

182016211 1-842-088-11 KDF71G-30S-1H
30pin connector 26",22" Only 26",22" Only
RFRC moddule SYNC 1 5
RESET 2 6
RFRC module GND 3 7
2b-1/2b-2/2b-3/3a-1//3a-2/P-1 RX 4 3
only Japan TX 5 4
VDD 6 2
JAM SYT10-06-WL-ET
1-821-146-11

LVDS-FFC
FHD Panel

Wifi moduule (EU Only) 1 1 STBY3.3V or

2 2 RS232_RXD
GND 1 10 3 3 RS232_TXD Panel_Ctrl1 / NC 1 NC NC 1 Panel_sel
WIFI VCC 2 13 4 4 SIRCS_OUT Panel_Ctrl2 / TCON_RDY 2 NC NC 2 NC
WIFI USB_P 3 9 5 5 SIRCS_IN Panel_Ctrl3 / T_TD_HSYNC 3 NC 12 3 SCL
WIFI USB_M 4 11 6 6 GND Panel_Ctrl4 / X_FRC_RST 4 NC 11 4 SDA
WIFI GND 5 8 CN9005 Panel_Ctrl5 / LR_FLAG(For A 5 NC 9 5 WP
SM05B-GHS-TB 6pin connector 182113311 Panel_Ctrl6 / SA_MODE 6 NC NC 6 NC
1-819-334-11 Panel_Ctrl7 / SETON2(NC) 7 NC NC 7 LVDS_SEL = NC
Panel_Ctrl8 / PANEL_SEL 8 NC NC 8 NC
1 1 L+ Panel_Ctrl9 / BINT 9 5 NC 9 NC
2 2 L- Panel_Ctrl10 / T_TD_VSYN 10 NC NC 10 NC
2 3 R- Panel_Ctrl11 / SDA 11 4 13 11 GND
SPEAKER L+ (Fasten # 187) 1 1 1 4 R+ Panel_Ctrl12 / SCL 12 3 42 12 RO[0]N
Front L- (Fasten #110) 2 2 Housing S peaker Connector GND 13 11 41 13 RO[0]P
Lch 2.0ch：4pin 0-844-426-01 JST PBVP-04VV 2.0ch：CN4601 4pin 0-844-173-01 JST SM04B-PBVSS-TBB(LF)(SN) PANEL_EVEN4_P 14 41 40 14 RO[1]N
PANEL_EVEN4_N 15 40 39 15 RO[1]P
10 10 STBY_+3.3V PANEL_EVEN3_P 16 39 38 16 RO[2]N
12 9 AUDIO+12.5V PANEL_EVEN3_N 17 38 37 17 RO[2]P
SPEAKER R- (Fasten # 110) 2 3 14 8 AUDIO+12.5V GND 18 37 36 18 GND
Front R+ (Fasten # 187) 1 4 11 7 AUDIO+12.5V_GND PANEL_EVEN_CLK_P 19 36 35 19 ROCLK-
Rch 13 6 AUDIO+12.5V_GND PANEL_EVEN_CLK_N 20 35 34 20 ROCLK+
15 5 REG+12.5V_GND GND 21 34 33 21 GND

65
17 4 REG+12.5V_GND PANEL_EVEN2_P 22 33 32 22 RO[3]N
Refer to Sheeet [ Appendix SP Connector ] 16 3 REG+12.5V PANEL_EVEN2_N 23 32 31 23 RO[3]P
18 2 REG+12.5V PANEL_EVEN1P 24 31 30 24 RO[4]N
24 1 T-CON_VCC PANEL_EVEN1_N 25 30 29 25 RO[4]P
CN6701 SJM20-28WLB CN6001 PANEL_EVEN0_P 26 29 44 26 GND
To B board (100106) 1-842-569-11 PANEL_EVEN0_N 27 28 43 27 GND
T-CON_Vcc12V 28 NC HEADER ASSEMBLY FOR PWB 10P GND 28 43 27 28 RE[0]N
GND 27 NC PANEL_ODD4_P 29 25 26 29 RE[0]P
T-con T-CON_VCC12V 26 NC 7 9 AC_OFF_DET PANEL_ODD4_N 30 24 25 30 RE[1]N
GND 25 NC 1 8 POWERON PANEL_ODD3_P 31 23 24 31 RE[1]P
T-CON_VCC_12V To B 24 1 6 7 BL_ERR PANEL_ODD3_N 32 22 23 32 RE[2]N
GND 23 NC 5 6 BL_ON GND 33 21 22 33 RE[2]P
BDR_ASU_12V 22 NC 2 5 DIMMER PANEL_ODD_CLK_P 34 20 21 34 GND
Opttion GND 21 NC 4 4 HSYNC/DIMMER_DC PANEL_ODD_CLK_N 35 19 20 35 RECLK-
BDR_ASU_12V 20 NC 8 3 TCON_ON GND 36 18 19 36 RECLK+
GND 19 NC 3 2 PFC_PWR PANEL_ODD2_P 37 17 18 37 GND
REG12V 18 2 9 1 GND PANEL_ODD2_N 38 16 17 38 RE[3]N
GND 17 4 CN6002 PANEL_ODD1P 39 15 16 39 RE[3]P
REG12V 16 3 1-819-452-11 PANEL_ODD1_N 40 14 15 40 RE[4]N
GND 15 5 1 GND PANEL_ODD0_P 41 13 14 41 RE[4]P
AU_12V 14 8 G--B Harness 2 UARTD_TX PANEL_ODD0_N 42 12 46 42 GND
AU_GND 13 6 G--B 3 UARTD_RX GND 43 27 28 43 GND
AU_12V 12 9 4 RESET GND 44 26 NC 44 GND
AU_GND 11 7 5 STBY_+3.3V Panel_Ctrl13 45 NC NC 45 GND
B booard STBY3.3V 10 10 6 MODE_TVM GND 46 42 NC 46 GND
GND 9 1 7 UARTA_RX PANEL_VCC_SW 47 NC NC 47 NC
T-CON_ON 8 3 8 NC (MD2) PANEL_VCC_SW 48 48 48 48 Vcc(12V)
AC_OFF_DET 7 9 9 UARTC_RX PANEL_VCC_SW 49 49 49 49 Vcc(12V)
BL_ERR 6 7 10 UARTC_TX PANEL_VCC_SW 50 50 50 50 Vcc(12V) P-TWO Flip tyoe
BL ON 5 6 11 GND PANEL_VCC_SW 51 51 51 51 Vcc(12V) 196334-51041-3(model name of P-ttwo)
NC 4 4 12 UARTA_TX CN2001 No T-Con Board
PFC_ON 3 2 13 ECS_MATRIX 1-842-546-11 1 1 24V DC
PWM_DIMMER 2 5 14 STBY_+3.3V FFC Direct in Connector NC 2 24V DC
POWER_ON 1 8 15 MODE_PEM 24"Only NC 3 24V DC
16 PEM_LOG_RX I-PEX NC 4 24V DC
17 PEM_LOG_TX NC 5 24V DC
18 GND 2 6 GND
CN9004 NC 7 GND
1-774-667-51 NC 8 GND
CN6201 TL-EX1 Connector,FFC/FPC 18P NC 9 GND
To LED Diiver NC 10 GND
VLED_VCC 1 1 4 11 BL Status
VLED_GND 2 6 3 12 BL ON/OFF
LED_ON 3 12 NC 13 NC
GL_ERR 4 11 6 14 EXT PWM
GND 5 NC
PWM_DIMMER 6 14 24" CI1114M1HR0-NH （JST compatible SM14B-SRSS-TB
B）
1-815-022-11 TL-EX1JIG board (Civilux)
JST XA 6P 22"， JST SM14B-SRSS-TB

AC_IN
Pow
wer Cord AC-N 1 1
AC-L 2 2
CN6001
SFP79-02WLB JAM
1-822-908-11

R3 or RU board STBY3.3V 1 1
RS232_RXD 2 2
RS232_TXD 3 3
SIRCS_IN 4 4
SIRCS_OUT 5 5
GND 6 6
CN101
182018311
RM-GD020
RM-GD020, CD013
KDL- 22, 26 EX420, 32,40,46 EX520

KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523

 30pin FFC

(Only Interface between board an

nd board）

HMS3 board BAT-V board

d T-con Board(60Hz)
JAM 3pin Straight To BAT
Diagrams

GND 1 40 6 1 BD USB GND PANEL_VCC_SW 1 30 VCC

Motion Sen
nsor MOTION_SENS 2 38 1 2 BD VBUS PANEL_VCC_SW 2 LVDS-FFC 29 VCC
3a-X/V/2 REG+5V 3 39 3 3 BD USB_P PANEL_VCC_SW 3 B-WXGA panel 28 VCC
P-1/2 1-821-130-11 4 4 BD ND G PANEL_VCC_SW 4 27 VCC
2 5 BD USB_N PANEL_VCC_SW 5 26 VCC PANEL FFC
5 6 BD USB SPDIF NC 6 25 NC(Open: Inside of panel) 96pin
7 BD EJECT/BDR ON GND 7 24 GND
8 BD DISC1/BDR GPIO1 GND 8 23 GND
SW m
module GND 1 37 9 BD DISC2/U_DL_STAT Panel_Ctrl9 / BINT 9 22 B-INT / WP
SW modulle POWER_INT 2 35 10 BD UART Tx/ BDR KEY1 NC 10 21 SELLVDS(Default:VESA)
ALL KEY1 3 36 NC 11 BD UART Rx/ BDR KEY2 /HLR DEVICE_SDA Panel_Ctrl8 / PANEL_S 11 20 PANEL_SEL
1-822-693-11 6 12 BDR STBY_+3.3V GND 12 19 GND
BV - H Harness 4 13 BDR UART_Tx/ RF UARTT_TX PANEL_ODD3_P 13 18 RX3+
H-B 5 14 BDR UART_Rx/ RF_UART T_RX PANEL_ODD3_N 14 17 RX3-
5-3-2. KDL- 32EX420

1 15 BDR WAKEUP_STBY_MIICON/RF SEL GND 15 16 GND

2 16 BDR GPIO0/ RF_RST PANEL_ODD_CLK_P 16 15 RXCLK+
HLR2
2 board STBY+3.3V 1 33 3 17 BDR GND PANEL_ODD_CLK_N 17 14 RXCLK-
GB Sensor/OPT_Sensor
LED/IR/RG GND 2 31 18 WIFI GND GND 18 13 GND
2b-3 LED_REC 3 29 19 WIFI USB_P PANEL_ODD2_P 19 12 RX2+
3a-V LED_STBY 4 27 20 WIFI GND PANEL_ODD2_N 20 11 RX2-
3a-2 LED_TIMER 5 25 21 WIFI USB_N GND 21 10 GND
P-1 LED_POWER 6 28 22 WIFI GND PANEL_ODD1P 22 9 RX1+
P-2 LED_PIC_MUTE 7 30 23 WIFI VBUS PANEL_ODD1_N 23 8 RX1-
DEVICE_SDA/GND 8 NC NC 24 HLR DEVICE_SCL GND 24 7 GND
DEVICE_SCL/LED_BDR 9 NC 5 25 HLR LED_ON_TIMER PANEL_ODD0_P 25 6 RX0+
OPT_SENS 10 32 12 26 HLR SIRCS PANEL_ODD0_N 26 5 RX0-
VD+3.3V 11 34 4 27 HLR LED_STBY GND 27 4 GND
SIRCS 12 26 6 28 HLR LED_POWER Panel_Ctrl11 / SDA 28 3 SDA
1-821-139-11 3 29 HLR LED_REC Panel_Ctrl12 / SCL 29 2 SCL
7 30 HLR LED_PIC_MUTE NC 30 1 NC (Aging pin)
2 31 HLR NDG CN2000
10 32 HLR OPT_SENS 1-842-088-11
1 33 HLR STBY_3.3V
SYNC 1 15 11 34 HLR 3.3V
RFRC
C modul RESET 2 16 2 35 SW POWER_KEY
RFRC mod dule GND 3 17 3 36 SW_KEY
2b-1/2b-2//2b-3/3a-1/3a-2/P-1 RX 4 13 1 37 SW NDG
only Japann TX 5 14 2 38 HMS DET /SONY LOGO
VDD 6 12 3 39 HMS 5V /LOGO 5V
JAM SYT10-06-WL-ET 1 40 HMS GND/ LOGO GND
1-821-146-11 CN9006
1-818-692-21 （JST）
HEADER ASSENBLY 40P

SPEAKEER L+ (Fasten # 187) 1 1

Front L- (Fasten #110) 2 2
Lch 1 1 L+
2 2 L-
2 3 R-
1 4 R+
SPEAKEER R- (Fasten # 110) 2 3 Housing Speaker Connector
Front R+ (Fasten # 187) 1 4 426-01 JST PBVP-04V 2.0ch：CN4601 4pin 0-844-173--01 JST SM04B-PBVSS-TB(LF)(SN)
2.0ch：4pin 0-844-4
Rch
1 1 STBY3.3
3V
2 2 RS232_R
RXD
Refer to Sheet [ Appendix SP Connec
ctor ] 3 3 RS232_T
TXD
4 4 SIRCS_O
OUT
5 5 SIRCS_
_IN
6 6 GND
CN9005
6pin connector 182113311

10 10 STBY_+3.3V
12 9 AUDIO+12.5V
14 8 AUDIO+12.5V
11 7 AUDIO+12.5V_GND
13 6 AUDIO+12.5V_GND GND 1
15 5 REG+12.5V_GND UARTD_TX 2
17 4 REG+12.5V_GND UARTD_RX 3
16 3 REG+12.5V RESET 4
18 2 REG+12.5V STBY_+3.3V 5
24 1 T-CON_VCC MODE_TVM 6
CN6001 UARTA_RX 7
1-842-569-11 NC (MD2) 8
B 10P
HEADER ASSEMBLY FOR PWB UARTC_RX 9
UARTC_TX 10
7 9 AC_OFF_DET GND 11
1 8 POWERON UARTA_TX 12
6 7 BL_ERR ECS_MATRIX 13
TL-EX1JIG board

66
5 6 BL_ON STBY_+3.3V 14
2 5 DIMMER MODE_PEM 15
4 4 HSYNC/DIMMER_DC PEM_LOG_RX 16
8 3 TCON_ON PEM_LOG_TX 17
3 2 PFC_PWR GND 18
9 1 GND CN9004
CN6002 1-774-667-51
1-819-452-11 L-EX1 Connector,FFC/FPC 18P
TL

CN6704 (32" GE2A)

SJM20-28WLB
To B board (100106)
T-CON_Vcc12V 28 NC
GND 27 NC
T-con T-CON_VCC12V 26 NC
GND 25 NC
T-CON_VCC_12V To B 24 1
GND 23 NC
BDR_ASU_12V 22 NC

Option
O GND 21 NC
BDR_ASU_12V 20 NC
GND 19 NC
REG12V 18 2
GND 17 4
REG12V 16 3
GND 15 5
AU_12V 14 8
AU_GND 13 6 B boardG-B Harnesss
AU_12V 12 9 G-B
AU GND 11 7
B board STBY3.3V 10 10
GND 9 1
T-CON_ON 8 3
AC_OFF_DET 7 9
BL_ERR 6 7
BL ON 5 6
DC_DIMMER 4 4
PFC_ON 3 2
PWM_DIMMER 2 5
POWER_ON 1 8

To LS CN6701 (32" GE2A)

+OUT1 1
NON 2
+OUT3 3
NON 4
MOLEX L 4P
1-822-359-11
LS
S
To LS CN6702 (32" GE2A)
-OUT1 1
NON 2
-OUT3 3
NON 4
NC 5

MOLEX L 5P
1-822-360-11

AC_IN
AC-N 1 1 Power Cord
AC-L 2 2
CN6001
SFP79-02WLB JAM
1-822-908-11

R3 orr RU board STBY3.3V 1 1

RS232_RXD 2 2
RS232_TXD 3 3
SIRCS_IN 4 4
SIRCS_OUT 5 5
GND 6 6
CN101
182018311
RM-GD020
RM-GD020, CD013
KDL- 22, 26 EX420, 32,40,46 EX520

KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523

 (Only Interface between board and board）
51pin FFC

HMS3 Board NC and No HMS3 Board for BAT-V board T-ccon Board(60Hz)
JAM 3pin Straight the following Europe models onlyy. To BAT
Diagrams

GND 1 40 N
NC - KDL-32EX520 6 1 BD USB GND Panel_Ctrl1 / NC
C 1 51 Panel__Ctrl1 / NC
Motion Sensor MOTION_SENS 2 38 N
NC - KDL-32EX523 1 2 BD BUSV Panel_Ctrl2 / TC
CON_RDY 2 50 Panel__Ctrl2 / TCON_RDY
3a-X/V/2 REG+5V 3 39 N
NC - KDL-40EX520 3 3 BD USB_P Panel_Ctrl3 / NC
C 3 49 Panel__Ctrl3 / NC
P-1/2 1-821-130-11 - KDL-40EX523 4 4 BD GND Panel_Ctrl4 / LU
UT_SEL2 4 48 Panel__Ctrl4 / LUT_SEL2
- KDL-46EX520 2 5 BD USB_N Panel_Ctrl5 / LU
UT_SEL1 5 47 Panel__Ctrl5 / LUT_SEL1 PANEL FFC
5 6 BD USB SPDIF Panel_Ctrl6 / LU
UT_SEL0 6 46 Panel__Ctrl6 / LUT_SEL0 96pin
7 BD EJECT/BDR ON Panel_Ctrl7 / NC
C 7 45 Panel__Ctrl7 / NC
8 BD DISC1/BDR GPIO1 Panel_Ctrl8 / PA
ANEL_SEL 8 44 Panel__Ctrl8 / PANEL_SEL
SW Mod
dule GND 1 37 9 BD DISC2/U_DL_STAT Panel_Ctrl9 / BIN
NT 9 43 Panel__Ctrl9 / BINT
SW module POWER_INT 2 35 10 BD UART Tx/ BDR KEY1 Panel_Ctrl10 / N
NC 10 42 Panel__Ctrl10 / NC
ALL KEY1 3 36 NC 11 BD UART Rx/ BDR KEY2 /HLR DEVICE_S
SDA Panel_Ctrl11 / S
SDA 11 41 Panel__Ctrl11 / SDA
1-822-693-11 12 BDR STBY_+3.3V Panel_Ctrl12 / S
SCL 12 LVDS-FFC 40 Panel__Ctrl12 / SCL
BV - H Harness 13 BDR UART_Tx/ RF UART_TX GND 13 B-PEL3 39 GND
H-B 14 BDR UART_Rx/ RF_UART_RX PANEL_EVEN4__P 14 38 PANE
EL_EVEN4_P
15 BDR WAKEUP_STBY_MICON/RF SEL PANEL_EVEN4__N 15 37 PANE
EL_EVEN4_N
16 BDR GPIO0/ RF_RST PANEL_EVEN3__P 16 36 PANE
EL_EVEN3_P
HLR2 Bo
oard STBY+3.3V 1 33 17 BDR GND PANEL_EVEN3__N 17 35 PANE
EL_EVEN3_N
LED/IR/RGB Sensor/OPT_Sensor GND 2 31 5 18 WIFI GND GND 18 34 GND
2b-3 LED_REC 3 29 3 19 WIFI USB_P PANEL_EVEN_CCLK_P 19 33 PANE
EL_EVEN_CLK_P
3a-V LED_STBY 4 27 1 20 WIFI GND PANEL_EVEN_CCLK_N 20 32 PANE
EL_EVEN_CLK_N
3a-2 LED_TIMER 5 25 4 21 WIFI USB_N GND 21 31 GND
P-1 LED_POWER 6 28 NC 22 WIFI GND PANEL_EVEN2__P 22 30 PANE
EL_EVEN2_P
P-2 LED_PIC_MUTE 7 30 2 23 WIFI VBUS PANEL_EVEN2__N 23 29 PANE
EL_EVEN2_N
DEVICE_SDA/GND 8 NC NC 24 HLR DEVICE_SCL PANEL_EVEN1P 24 28 PANE
EL_EVEN1P
DEVICE_SCL/LED_BDR 9 NC 5 25 HLR LED_ON_TIMER PANEL_EVEN1__N 25 27 PANE
EL_EVEN1_N
OPT_SENS 10 32 12 26 HLR SIRCS PANEL_EVEN0__P 26 26 PANE
EL_EVEN0_P
VD+3.3V 11 34 4 27 HLR LED_STBY PANEL_EVEN0__N 27 25 PANE
EL_EVEN0_N
SIRCS 12 26 6 28 HLR LED_POWER GND 28 24 GND
1-821-139-11 3 29 HLR LED_REC PANEL_ODD4_P 29 23 PANE
EL_ODD4_P
7 30 HLR LED_PIC_MUTE PANEL_ODD4_N 30 22 PANE
EL_ODD4_N
2 31 HLR NDG PANEL_ODD3_P 31 21 PANE
EL_ODD3_P
10 32 HLR OPT_SENS PANEL_ODD3_N 32 20 PANE
EL_ODD3_N
1 33 HLR STBY_3.3V GND 33 19 GND
Wifi mod
dule 11 34 HLR 3.3V PANEL_ODD_C
CLK_P 34 18 PANE
EL_ODD_CLK_P
(US 32", 40" & 46" only) 2 35 SW POWER_KEY PANEL_ODD_C
CLK_N 35 17 PANE
EL_ODD_CLK_N
GND 1 20 3 36 SW_KEY GND 36 16 GND
WIFI VCC 2 23 NC for the following Europe 1 37 SW NDG PANEL_ODD2_P 37 15 PANE
EL_ODD2_P
WIFI USB_P 3 19 models only. C
NC 2 38 HMS DET /SONY LOGO PANEL_ODD2_N 38 14 PANE
EL_ODD2_N
WIFI USB_M 4 21 - KDL-32EX520 C
NC 3 39 HMS 5V /LOGO 5V PANEL_ODD1P
P 39 13 PANE
EL_ODD1P
WIFI GND 5 18 - KDL-32EX523 C
NC 1 40 HMS GND/ LOGO GND PANEL_ODD1_N 40 12 PANE
EL_ODD1_N
SM05B-GHS-TB - KDL-40EX520 CN9006 PANEL_ODD0_P 41 11 PANE
EL_ODD0_P
1-819-334-11 - KDL-40EX523 1-818-692-21 （JST） PANEL_ODD0_N 42 10 PANE
EL_ODD0_N
- KDL-46EX520 HEADER ASSENBLY 40P GND 43 9 GND
5-3-3. KDL- 32, 40, 46 EX520, 32, 40, 46 EX523

GND 44 8 GND
Panel_Ctrl13 45 7 Panel__Ctrl13
GND 46 6 GND
SPEAKER L+ (Fasten # 187) 1 1 PANEL_VCC_SW W 47 5 PANE
EL_VCC_SW
Front L- (Fasten #110) 2 2 PANEL_VCC_SW W 48 4 PANE
EL_VCC_SW
Lch 11 L+ PANEL_VCC_SW W 49 3 PANE
EL_VCC_SW
22 L- PANEL_VCC_SW W 50 2 PANE
EL_VCC_SW
23 R- PANEL_VCC_SW W 51 1 PANE
EL_VCC_SW
1 4 R+ CN2001
SPEAKER R- (Fasten # 110) 2 3 Hoousing Speaker Connector 1-842-548-11
Front R+ (Fasten # 187) 1 4 2.0ch：4pin 0-844-426-01 JST PB
BVP-04V 2.0ch：CN4601 4pin 0-844-173-01 JST SM04B-P
PBVSS-TB(LF)(SN) FFC Direct in Co
onnector
Rch Yamaichi
1 1 STBY3.3V
2 2 RS232_RXD
Refer to Sheet [ A
Appendix_SP_Connector ] 3 3 RS232_TXD
4 4 SIRCS_OUT
5 5 SIRCS_IN
6 6 GND
CN9005
6pin connector 182113311

10 10 STBY_+3.3V
12 9 AUDIO+12.5V
14 8 AUDIO+12.5V
11 7 AUDIO+12.5V_GND
13 6 AUDIO+12.5V_GND GND 1
15 5 REG+12.5V_GND UARTD_TX 2
17 4 REG+12.5V_GND UARTD_RX 3
16 3 REG+12.5V RESET 4
18 2 REG+12.5V STBY_+3.3V 5
24 1 T-CON_VCC MODE_TVM 6
CN6001 UARTA_RX 7
1-842-569-11 NC (MD2) 8
HEADER ASSEMBLY FOR PWB 10P UARTC_RX 9
UARTC_TX 10
7 9 AC_OFF_DET GND 11
1 8 POWERON UARTA_TX 12
6 7 BL_ERR ECS_MATRIX 13 TL-EX1JIG board

67
5 6 BL_ON STBY_+3.3V 14
2 5 DIMMER MODE_PEM 15
4 4 HSYNC/DIMMER_DC PEM_LOG_RX 16
8 3 TCON_ON PEM_LOG_TX 17
3 2 PFC_PWR GND 18
9 1 GND CN9004
CN6002 1-774-667-51
1-819-452-11 TL-EX1 Connecttor,FFC/FPC 18P

CN6201(40",46" GE3)
CN6704 (37"32" GE2A)
SJM20-28WLB
To B board (100106)
T-CON_Vcc12V 28 NC
GND 27 NC
T-CON_VCC12V 26 NC
T-ccon GND 25 NC
T-CON_VCC_12V To B 24 1
GND 23 NC
BDR_ASU_12V 22 NC
GND 21 NC
Option BDR_ASU_12V 20 NC
GND 19 NC
REG12V 18 2
GND 17 4
REG12V 16 3
GND 15 5
AU_12V 14 8
AU_GND 13 6 B-Board G-B Harness
AU_12V 12 9 G-B
AU_GND 11 7
STBY3.3V 10 10
B-Boaard GND 9 1
T-CON_ON 8 3
AC_OFF_DET 7 9
BL_ERR 6 7
BL ON 5 6
DC_DIMMER 4 4
PFC_ON 3 2
PWM_DIMMER 2 5
POWER_ON 1 8

To LS
CN6601(40",46" G
GE3) +OUT1 1
CN6701 (37"32" G
GE2A) NON 2
+OUT3 3
NON 4
MOLEX L 4P
1-822-359-11
LS
To LS
CN6602(40",46" G
GE3) -OUT1 1
CN6702 (37"32" G
GE2A) NON 2
-OUT3 3
NON 4
NC 5

MOLEX L 5P
1-822-360-11

AC_IN
Power C
Cord AC-N 1 1
AC-L 2 2
CN6001
SFP79-02WLB JAM
1-822-908-11

STBY3.3V 1 1
R3 or RU b
board RS232_RXD 2 2
RS232_TXD 3 3
SIRCS_IN 4 4
SIRCS_OUT 5 5
GND 6 6
CN101
182018311
RM-GD020
RM-GD020, CD013
KDL- 22, 26 EX420, 32,40,46 EX520

KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523

Diagrams KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

5-4.CIRCUIT BOARD LOCATION R3 Board is for Hotel Model only

5-4-1. KDL-22EX420, 22EX423 5-4-2. KDL-26EX420, 26EX423 5-4-3. KDL-32EX420, 32EX520, 32EX523

G1B BOARD GE2A BOARD BAT-V BOARD R3 BOARD

BAT-S BOARD R3 BOARD R3 BOARD
G1A BOARD BAT-S BOARD

T-Con
SWITCH UNIT
SWITCH UNIT HLR2 BOARD SWITCH UNIT HMS3 BOARD
HMS3 BOARD HLR2 BOARD HMS3 BOARD HLR2 BOARD

5-4-4. KDL-40EX520/ 40EX523 5-4-5. KDL-46EX520/ 46EX523

R3 BOARD R3 BOARD
BAT-V BOARD
BAT-V BOARD

GE3 BOARD
GE3 BOARD

SWITCH
SWITCH
UNIT
UNIT

T-Con HLR2 BOARD HMS3 BOARD T-Con HLR2 BOARD HMS3 BOARD

68
 KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020
SECTION 6
DISASSEMBLY, EXPLODED VIEWS AND OTHER PARTS
6-1. KDL-22EX420, 22EX423
6-1-1. Disassembly, Exploded View
c) Boards, Bracket, Panel
and Bezel Bezel (22R)

27
Switch,
23
LCD Unit
28
Panel
B) Boards, Bracket and
Speaker 22
Bracket,
Sheet,
LCD (22)
Insulation (G1) 26
15
Speaker
(30X100 MM) HLR2
Mount
a) Stand and 13
25
Rear Cover 14
HMS3
24 Mount •Remove screws before disassembly.
Rear, Cover Static Converter Sheet Radiation (BAT-L/V)
(TV) – G1A
Frenel Lens Details of screws Section 6-1-2.
Power 21
Supply 10 •Unplug connectors before disassembly.
Cord
9 Bracket R (Top) 16
20 Bracket R
(BTM)
•Place the TV set facing downwards on a stable, level
Cover,AC (S)
BATS Board surface before disassembly and assembly of parts.
8
18 • ! and shaded parts are critical for safety. Replace
Clamper, 13 only with part number specified.
Speaker
Cable (30X100 MM)
19 Bracket,
R3 Mount 17 • Parts contain confidential information. Strictly
7 12 Side
follow the instruction whenever the components are
Label (BAT-S
MOLD REAR)
repaired and/or replaced.
11 Label (BAT-S
MOLD SIDE)
Stand Pipe
R (SS)
Stand, (*) Parts are not stocked since they are seldom required for routine service. Some
3 Block 1
delays should be anticipated when ordering these components.
Hinge (SS)
• Picture provided in this section might have slight difference from the actual sets.
6
Stand Head • Lines that indicate parts are shown in blue in the illustration.
4 P (SS) • The reference number besides the part description in the picture indicates the
Stand Pipe L disassembly sequence.
2 (SS)
5
H, Cover

69
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-1. KDL-22EX420, 22EX423

6-1-1. Disassembly, Exploded View REF.NO. PART NO. DESCRIPTION REMARK
REF.NO. PART NO. DESCRIPTION REMARK ! 1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)
1 NOT STOCKED STAND, BLOCK 2~6 (22EX420(Sogul Area, Singapore, Indonesia,
4-269-867-01 STAND, PIPE L(SS) (except 22EX420(Hong Vietnam, Philippines, India, Malaysia, South Africa))
Kong, Thailand,Taiwan)) ! 1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)
4-269-867-11 STAND, PIPE L(SS) (22EX420(Sogul Area, Singapore, Indonesia,
(22EX420(Hong Kong, Thailand,Taiwan)) Vietnam, Philippines, India, Malaysia, South Africa))
4-269-868-01 STAND, PIPE R(SS) (except 22EX420(Hong
Kong, Thailand,Taiwan))
4-269-868-11 STAND, PIPE R(SS) 10 4-265-512-01 REAR COVER (22 SYR)
(22EX420(Hong Kong, Thailand,Taiwan)) (Except 22EX420(Hong Kong , Taiwan, Thailand))
4 4-269-871-01 STAND, HEAD P(SS) (except 22EX420(Hong 4-265-512-11 REAR COVER (22 SYR)(22EX420 Hong Kong)
Kong, Thailand, Taiwan)) 4-265-512-21 REAR COVER (22 SYR) (22EX420 Taiwan)
4-269-871-11 STAND, HEAD P(SS) 4-265-512-31 REAR COVER (22 SYR) (Hotel)
(22EX420(Hong Kong, Thailand,Taiwan)) (Except 22EX420(Hong Kong , Taiwan, Thailand))
5 NOT STOCKED H,COVER 4-265-512-41 REAR COVER (22 SYR) (Hotel) (22EX420 Hong
6 NOT STOCKED HINGE (SS) Kong)
7 4-262-708-01 CLAMPER, CABLE 4-265-512-51 REAR COVER (22 SYR) (Hotel) (22EX420 Taiwan)
8 4-257-892-01 COVER, AC(S) (except 22EX420(Hong Kong, 4-265-512-71 REAR COVER (22 SYR) (22EX420 Thailand)
Thailand, Taiwan)) 4-265-512-81 REAR COVER (22 SYR) (Hotel) (22EX420 Thailand)
4-257-892-21 COVER, AC(S) 11 4-267-116-11 LABEL (BAT-S MOLD SIDE) (22EX420 Taiwan)
(22EX420(Hong Kong, Thailand,Taiwan)) 4-267-117-01 LABEL (BAT-S MOLD SIDE)
9 ! 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.) (Except 22EX420(Hong Kong , Taiwan, Thailand))
(22EX420(Sogul Area, Singapore, Indonesia,
4-267-117-11 LABEL (BAT-S MOLD SIDE)
Vietnam, Philippines, India, Malaysia, South
(22EX420 (Hong Kong, Thailand))
Africa))
12 4-265-038-11 LABEL(BAT-S MOLD REAR) (22EX420(Taiwan))
! 1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)
13 1-858-591-11 SPEAKER (30X100 MM)
(22EX420 Taiwan)
14 ! 1-474-283-11 STATIC CONVERTER (TV) - G1A
! 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)
15 NOT STOCKED SHEET, INSULATION(G1)
(22EX420 Thailand)
16 4-269-368-01 BRACKET, R (TOP)
! 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)
17 A-1804-894-A R3 MOUNT
(22EX423 (Nigeria, Saudi Arabia),
18 A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE
22EX420(Hong Kong))
(22EX420 Hong Kong)
! 1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)
A-1809-340-A BATS_I1_WXG_PA COMPL SERVICE
(22EX423, 22EX420 Hong Kong))
(Except 22EX420 (Hong Kong, Taiwan), 22EX423
(Nigeria, Saudi Arabia))
A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE (22EX420
Taiwan)
A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE (22EX423)

70
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-1. KDL-22EX420, 22EX423

6-1-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK
19 4-256-428-01 BRACKET, SIDE (22/24/26) (except 22EX420
(Hong Kong, Thailand, Taiwan))
4-256-428-51 BRACKET, SIDE (22/24/26)
(22EX420(Hong Kong, Thailand,Taiwan))
20 4-269-369-01 BRACKET, R (BTM)
21 4-256-443-01 SHEET, RADIATION (BAT-L/V)
(/CH/B_PWB(1))
22 4-256-415-01 BRACKET, LCD (22)
23 ! 1-811-320-11 LCD PANEL (LC216EXN-SDA2)
24 * 1-856-184-11 FRENEL LENS (except 22EX420 (Hong
Kong, Thailand, Taiwan))
* 1-856-184-21 FRENEL LENS
(22EX420(Hong Kong, Thailand,Taiwan))
25 A-1792-511-A HMS3 MOUNT
26 A-1792-877-A HLR2 MOUNT(B-O) (except 22EX420 (Hong
Kong, Thailand, Taiwan))
A-1794-192-A HLR2 MOUNT(W-O)
(22EX420(Hong Kong, Thailand,Taiwan))
27 4-266-730-01 BEZEL(22 SYR) (except 22EX420 (Hong
Kong, Thailand, Taiwan))
4-266-730-31 BEZEL(22 SYR)
(22EX420(Hong Kong, Thailand,Taiwan))
28 1-489-443-11 SWITCH UNIT (except 22EX420 (Hong Kong,
Thailand, Taiwan))
1-489-443-51 SWITCH UNIT
(22EX420(Hong Kong, Thailand,Taiwan))

71
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-1. KDL-22EX420, 22EX423

6-1-2. Screws

Ref Part No Description

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3
2-990-421-41 SCREW (+PSW) (M3X6)
2-580-628-01 SCREW, +BVTP S3X6 TYPE2
2-580-592-01 SCREW, +PSW M3X8
2-580-602-01 SCREW, +PSW M4X12

LCD BRACKET

LCD PANEL

72
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-2. KDL-26EX420, 26EX423 c) Boards, Panel, and Bezel

LCD Panel
6-2-1. Disassembly, Exploded View Switch, Unit
23
28
•Remove screws before disassembly. Details
of screws Section 6-2-2.
27
•Unplug connectors before disassembly. Bezel
Bracket, LCD

B) Boards, Bracket and Speaker 22

Sheet,
15
Insulation 26

HLR 2
Board

A) Stand Assy and 25

Rear Cover Assy HMS3
Loudspeaker Board
14 24
13 Static Converter – G1B
Rear,Cover Frenel Lens
10 Sheet, Radiation
Bracket R (BTM) 20 21
9
Bracket R (Top)
Power 16
Cord 13 R3 Mount
Cover, 7 17
AC Loudspeaker

Clamper, 8
Cable 18
12 BATS Board
5
H, Cover Label (BAT-S Bracket, Side 19
Stand Pipe R(S) Mold Rear) Label (BAT-S
3 Mold Side)
11
6
Hinge (SS)
4 StandHead
Stand Pipe L(S)
2

1 Stand
Block

73
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-2. KDL-26EX420, 26EX423

6-2-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK
1 NOT STOCKED STAND, BLOCK 2~6 4-265-428-01 REAR COVER(26 SYR)(except 26EX420
2 4-269-869-01 STAND, PIPE L(S) (Taiwan, Hong Kong))
3 4-269-870-01 STAND, PIPE R(S) 11 4-267-116-01 LABEL (BAT-S MOLD SIDE) (26EX420
4 4-269-871-01 STAND, HEAD P(SS) Taiwan)
5 NOT STOCKED H,COVER 4-267-117-01 LABEL (BAT-S MOLD SIDE)
6 NOT STOCKED HINGE (SS) (except 26EX420 Taiwan)
7 4-257-892-01 COVER, AC(S) 12 4-265-038-01 LABEL(BAT-S MOLD REAR)
8 4-262-708-01 CLAMPER, CABLE (26EX420 (Taiwan))
9 ! 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.) 13 1-858-591-11 LOUDSPEAKER 30X100MM
(26EX420 Thailand) 14 ! 1-474-284-11 STATIC CONVERTER (TV) - G1B
! 1-838-278-11 POWER-SUPPLY CORD (WITH CONN.) 15 NOT STOCKED SHEET, INSULATION(G1)
(26EX420 Australia) 16 4-269-368-01 BRACKET, R (TOP)
! 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.) (Except 26EX420 Hong Kong)
(Except 26EX420 (Thailand, Australia, 17 A-1804-894-A R3 MOUNT
Taiwan, Hong Kong), 26EX423) 18 A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE
(26EX423)
! 1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)
A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE
(Except 26EX420 (Thailand, Australia,
(26EX420 (Hong Kong))
Taiwan, Hong Kong), 26EX423)
A-1809-340-A BATS_I1_WXG_PA COMPL SERVICE
! 1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)
(except 26EX420 (Hong Kong, Taiwan),
(Except 26EX420 (Thailand, Australia,
26EX423)
Taiwan, Hong Kong), 26EX423)
A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE
! 1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)
(26EX420 (Taiwan))
(26EX420 Taiwan)
19 4-256-428-01 BRACKET, SIDE (22/24/26)
! 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)
20 4-269-369-01 BRACKET, R (BTM) (Except 26EX420 Hong
(26EX423, 26EX420 Hong Kong)
Kong)
! 1-838-794-11 POWER-SUPPLY CORD (WITH CONN.) 21 4-256-443-01 SHEET, RADIATION (BAT-L/V)
(26EX423, 26EX420 Hong Kong) (/CH/B_PWB(1))
10 4-265-428-51 REAR COVER(26 SYR) (Hotel) (26EX420 22 4-256-415-01 BRACKET, LCD (22)
Hong Kong) 23 ! 1-811-321-11 LCD PANEL (LC260EXN-SDA2)
4-265-428-11 REAR COVER(26 SYR) 24 * 1-856-184-11 FRENEL LENS
(26EX420 Hong Kong) 25 A-1792-511-A HMS3 MOUNT
4-265-428-61 REAR COVER(26 SYR) (Hotel) (26EX420 26 A-1792-877-A HLR2 MOUNT(B-O)
Taiwan) 27 4-266-727-01 BEZEL(26 SYR)
4-265-428-21 REAR COVER(26 SYR) (26EX420 Taiwan) 28 1-489-443-11 SWITCH UNIT
4-265-428-41 REAR COVER(26 SYR) (except 26EX420
(Taiwan, Hong Kong))

74
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-2. KDL-26EX420, 26EX423

6-2-2. Screws

Ref Part No Description

2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3
4-256-393-01 SCREW +PSW M3X6 W12
2-990-421-41 SCREW (+PSW) (M3X6)
2-580-592-01 SCREW, +PSW M3X8
2-580-602-01 SCREW, +PSW M4X12

LCD BRACKET

LCD PANEL

75
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-3. KDL-32EX420, 32EX520, 32EX523

Switch, Unit c) Boards, Bracket Panel and Bezel
6-3-1. Disassembly, Exploded View
27
•Remove screws before disassembly. Panel
Bracket, C
Details of screws Section 6-3-2. Panel 26
21 Bracket, H
•Unplug connectors before disassembly. Bezel 32 (SYR)
22

20
LCD Panel
B) Boards, Bracket and Speaker (S32ESB)
Sheet, Insulation (G10) 19

GE2A (MY) – Static HLR2

Converter. Board
12
Loudspeaker 25
A) Stand and Rear
11 23 24
Cover Assy
Frenel Lens HMS3
15 Sheet Radiation Board
Rear Cover (32)
(BAT-L/V)
8
14 Bracket R(BTM)

7 Bracket R (Top) 13
Power
Supply Cord BAT-V Board
18
Cover,
AC
6 11 16
Loudspeaker Bracket, Side
17
Clamper, R3 Mount
Cable 5
9
Label (BAT-V Rear)

Label (BAT-V
10 Mold Side)
4
Stand Head (M9) 1 Stand,
Block
3 Neck (M9)
2
Stand
Base

76
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-3. KDL-32EX420, 32EX520, 32EX523

6-3-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK
1 NOT STOCKED STAND, BLOCK 2~4 8 4-265-034-01 LABEL(BAT-V REAR) (32EX520 Taiwan)
2 4-267-552-01 STAND,, BASE(M2)( ) 9 4-265-053-01 LABEL(BAT-V
( MOLD SIDE))
3 4-259-177-01 NECK(M9) (Except 32EX520 Taiwan)
4 4-267-492-01 STAND, HEAD(M9) 4-265-081-01 LABEL(BAT-V MOLD SIDE)(32EX520 Taiwan)
5 4-259-168-01 COVER, AC(M) 10 1-858-590-11 LOUDSPEAKER
6 4-262-708-01 CLAMPER, CABLE 11 ! 1-474-277-22 STATIC CONVERTER(TV) - GE2A
7 ! 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.) 12 4-269-368-01 BRACKET, R (TOP) (Except 32EX520 Iran)
(E
(Except t (32EX420,
(32EX420 32EX520) (T(Taiwan,
i 13 4 269 369 01
4-269-369-01 BRACKET R (BTM) (E
BRACKET, (Exceptt 32EX520 IIran))
Australia, New Zealand, Thailand)) 14 4-256-443-01 SHEET, RADIATION (BAT-L/V)
! 1-838-273-11 POWER-SUPPLY CORD (WITH CONN.) 15 4-258-700-01 BRACKET,SIDE(BAT-V MOLD 32/37)
(32EX520 Taiwan) 16 A-1804-894-A R3 MOUNT (Except 32EX520 Iran)
! 1-838-278-11 POWER-SUPPLY CORD (WITH CONN.) 17 A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
((32EX420 (Australia,
( , New Zealand),), 32EX520 ((except
p (32EX420,
( , 32EX520 (Hong
( g Kong,g,
(Australia, New Zealand)) Taiwan), 32EX523 (Nigeria, Saudi Arabia)))
! 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.) A-1805-360-B BATV_I1_F_HK COMPL SERVICE
(32EX420 Thailand, 32EX520 Thailand) (32EX520 Hong Kong)
! 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.) A-1806-295-B BATV_I1_F_TW COMPL SERVICE
(32EX520 Hong Kong, 32EX523 (Nigeria, (32EX520 Taiwan)
Saudi Arabia)) A-1806-554-B
A 1806 554 B BATV I1 W PA COMPL SERVICE (32EX420)
BATV_I1_W_PA
! 1-838-794-11 POWER-SUPPLY CORD (WITH CONN.) A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
(32EX520 Hong Kong, 32EX523 (Nigeria, (32EX523 (Nigeria, Saudi Arabia))
Saudi Arabia)) 18 4-268-446-01 SHEET, INSULATION(G10)
! 1-838-796-11 POWER-SUPPLY CORD (WITH CONN.) 19 ! 1-811-323-11 LCD PANEL (LTY[Z]320AN02-A02)
((Except
p ((32EX420, 32EX520)) ((Taiwan, ((32EX420))
Australia, New Zealand, Thailand)) ! 1-811-324-12 LCD PANEL (LTY[Z]320HN01-002)
! 1-838-798-11 POWER-SUPPLY CORD (WITH CONN.) (Except 32EX420)
(Except (32EX420, 32EX520) (Taiwan, 20 4-256-391-01 BRACKET, PANEL C
Australia, New Zealand, Thailand)) 21 4-256-392-01 BRACKET, PANEL (H)
8 4-275-429-01 REAR COVER(32) 22 * 1-856-184-11 FRENEL LENS
(Except 32EX520 (Hong Kong
Kong, Taiwan)) 23 A 1792 511 A
A-1792-511-A HMS3 MOUNT
4-275-429-11 REAR COVER(32) 24 A-1792-877-A HLR2 MOUNT(B-O)
(32EX520 (Hong Kong, Taiwan)) 25 4-266-721-01 BEZEL 32 (SYR)
4-275-429-41 REAR COVER(32) (Hotel) 26 1-489-443-11 SWITCH UNIT
(Except 32EX520 (Hong Kong, Taiwan))
4-275-429-51 REAR COVER(32) (Hotel) (32EX520 (Hong
Kong, Taiwan))
4-275-429-61 REAR COVER(32) (32EX420 Aus Easel)
4-275-429-71 REAR COVER(32) (32EX420 Basic Aus)

78
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-3. KDL-32EX420, 32EX520, 32EX523

6-3-2. Screws
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3

7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3

4-256-393-01 SCREW +PSW M3X6 W12

2-990-421-41 SCREW (+PSW) (M3X6)

4-259-541-01 USER SCREW ST

4-268-126-01 SCREW, ORNAMENTAL M6X12

4-257-907-01 JOINT STAND

2-580-608-01 SCREW, +PSW M5X16

78
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-4. KDL-40EX520, 40EX523

c) Boards, Bracket Panel and Bezel
6-4-1. Disassembly, Exploded View Switch, Unit
28

•Remove screws before disassembly. Panel Bracket, C

Panel Bracket, H 27
Details of screws Section 6-4-2.
22 23 Bezel (40SYR)
•Unplug connectors before disassembly.

B) Boards, Bracket and Speaker LCD Panel

21

Sheet,
26
13
A) Stand Assy and Insulation (G4) HLR
Mount
Rear Cover Assy
Static Converter 24
12
(TV) –GE3A Frenel 25
Rear Sheet Radiation
Lens HMS3
10 11 (BAT-L/V) 16
Cover Loudspeaker Bracket R Mount
20
(BTM)
9 17
Power R3 Mount 18 Label,Sheet
Supply
Cord Bracket R
(Top) 15
11
Cover, 7 19
AC Loudspeaker Bracket, Side

Clamper, Label 14
Cable 8
(BAT-V
BAT-V Board
Rear) 6

4 3
Cover,H Stand,
Head
5
Neck (ML9)
1
Stand,
Block

2 Stand, Base

79
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-4. KDL-40EX520, 40EX523

6-4-1. Disassembly, Exploded View

REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK
1 NOT STOCKED STAND, BLOCK 2~5 10 4-275-419-01 REAR COVER(40)
2 4-267-559-01 STAND, BASE(ML2) (except 40EX520 (Hong Kong,Taiwan))
3 4-267-499-01 STAND, HEAD(ML9) 4-275-419-41 REAR COVER(40) (Hotel)
4 NOT STOCKED COVER, H (except 40EX520 (Hong Kong,Taiwan))
5 4-259-180-01 NECK(ML9) 11 1-858-592-11 LOUDSPEAKER
6 4-265-034-01 LABEL(BAT-V REAR)(40EX520 Taiwan) 12 ! 1-474-287-21 STATIC CONVERTER (TV)-GE3A
7 4-259-168-01 COVER, AC(M) 13 4-268-443-01 SHEET, INSULATION(G4)
8 4-262-708-01 CLAMPER, CABLE 14 A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
9 ! 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.) (40EX523 (Nigeria, Saudi Arabia))
(40EX520 Hong Kong, 40EX523 (Nigeria, A-1805-360-B BATV_I1_F_HK COMPL SERVICE
Saudi Arabia)) (40EX520 Hong Kong)
! 1-838-794-11 POWER-SUPPLY CORD (WITH CONN.) A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
(40EX520 Hong Kong, 40EX523 (Nigeria, (except 40EX520 (Taiwan, Hong Kong),
Saudi Arabia)) 40EX523 (Nigeria, Saudi Arabia))
! 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.) A-1806-295-B BATV_I1_F_TW COMPL SERVICE
(40EX520 Thailand) (40EX520 Taiwan)
! 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.) 15 4-256-424-01 BRACKET, SIDE (BAT-V MOLD)
(except 40EX520 (Taiwan, Australia, New 16 4-256-443-01 SHEET, RADIATION (BAT-L/V)
Zealand, Thailand, Hong Kong), 40EX523 17 4-265-052-01 LABEL, SHEET(BAT-V MOLD SIDE)
(Nigeria, Saudi Arabia)) (except 40EX520 (Taiwan))
! 1-838-796-11 POWER-SUPPLY CORD (WITH CONN.) 4-265-080-01 LABEL, SHEET(BAT-V MOLD SIDE)
(except 40EX520 (Taiwan, Australia, New (40EX520 Taiwan)
Zealand, Thailand, Hong Kong), 40EX523 18 A-1804-894-A R3 MOUNT (Except 40EX520 Pakistan,
(Nigeria, Saudi Arabia)) 40EX523 Iran)
! 1-838-798-11 POWER-SUPPLY CORD (WITH CONN.) 19 4-269-368-01 BRACKET, R (TOP)
(except 40EX520 (Taiwan, Australia, New (Except 40EX520 Pakistan, 40EX523 Iran)
Zealand, Thailand, Hong Kong), 40EX523 20 4-269-369-01 BRACKET, R (BTM)
(Nigeria, Saudi Arabia)) (Except 40EX520 Pakistan, 40EX523 Iran)
! 1-838-278-11 POWER-SUPPLY CORD (WITH CONN.) 21 ! 1-811-325-11 LCD PANEL (LTY[Z]400HM08-001)
(40EX520 (Australia, New Zealand)) 22 4-256-391-01 BRACKET, PANEL (C)
! 1-838-273-11 POWER-SUPPLY CORD (WITH CONN.) 23 4-256-392-01 BRACKET, PANEL (H)
(40EX520 (Taiwan)) 24 * 1-856-184-11 FRENEL LENS
10 4-275-419-11 REAR COVER(40) 25 A-1792-511-A HMS3 MOUNT
(40EX520 (Hong Kong,Taiwan)) 26 A-1792-877-A HLR2 MOUNT(B-O)
4-275-419-51 REAR COVER(40) (Hotel) 27 4-266-701-01 BEZEL(40 SYR)
(40EX520 (Hong Kong,Taiwan)) 28 1-489-443-11 SWITCH UNIT

80
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-4. KDL-40EX520, 40EX523

6-4-2. Screws

Ref Part No Description

2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
4-256-393-01
SCREW +PSW M3X6 W12
4-259-541-01
USER SCREW ST
2-990-421-41
SCREW, (+PSW) (M3X6)
4-268-126-01
SCREW, ORNAMENTAL M6X12
4-257-907-01
JOINT STAND
2-580-608-01
SCREW, +PSW M5X16
4-167-964-01
SCREW, +PWTP2 4X16

81
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-5. KDL-46EX520, 46EX523 c) Boards, Panel and Bezel

Switch,
6-5-1. Disassembly, Exploded View
Unit 28

Panel Bracket, H 23
Bezel (46
•Remove screws before disassembly. Panel 22 21 SYR)
Details of screws Section 6-5-2. Bracket, C

•Unplug connectors before disassembly.

LCD Panel
B) Boards and Speaker
24
Sheet, Insulation 15
HLR2 Board

27 HMS3
A) Stand and Rear Mount
Cover 25 26
11 Loudspeaker
16 Fernel Lens
13 Sheet Radiation
(BAT-L/V) 22 Panel Bracket,
Rear,
C
Cover 9 Static Converter
(TV)-GE3A Bracket R
(BTM)
Power 8 19 17
Bracket R Label,Sheet (BAT-
Supply 18
(Top) Mold Side)
Cord
20 12
Cover, 11 R3 Mount
6 Bracket,
AC (M) Loudspeaker
Side
Clamper, Label (BAT-V
14
Cable 7 Rear 10 BAT-V
Board

4
H, Cover 3
Stand,
1
Head
5
Neck Stand,
Block

2 Stand, Base

82
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-5. KDL-46EX520, 46EX523

6-5-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK
1 NOT STOCKED STAND, BLOCK 2~4 14 A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
2 4-267-563-01 STAND, BASE(L2) (46EX523 (Nigeria, Saudi Arabia))
3 4-267-499-01 STAND, HEAD(ML9) A-1806-295-B BATV_I1_F_TW COMPL SERVICE
4 NOT STOCKED H, COVER(ML9) (46EX520 Taiwan)
5 4-259-183-01 NECK(L9) A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
6 4-259-168-01 COVER, AC(M) (Except (46EX520 Taiwan, 46EX523 (Nigeria,
7 4-262-708-01 CLAMPER, CABLE Saudi Arabia))
8 ! 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.) 15 4-268-443-01 SHEET, INSULATION(G4)
(Except 46EX520 (Australia, Thailand, Taiwan), 16 4-256-443-01 SHEET, RADIATION (BAT-L/V)
46EX523 (Nigeria, Saudi Arabia)) 17 4-265-052-01 LABEL, SHEET(BAT-V MOLD SIDE)
((Except (46EX520 Taiwan))
! 1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)
4-265-080-01 LABEL, SHEET(BAT-V MOLD SIDE)
(Except 46EX520 (Australia, Thailand, Taiwan),
(46EX520 Taiwan)
46EX523 (Nigeria, Saudi Arabia)) 18 4-269-368-01 BRACKET, R (TOP)
! 1-838-798-11 POWER-SUPPLY CORD (WITH CONN.) (Except (46EX520 Pakistan, 46EX523 Iran))
(Except 46EX520 (Australia, Thailand, Taiwan), 19 4-269-369-01 BRACKET, R (BTM) (Except (46EX520 Pakistan,
46EX523 (Nigeria, Saudi Arabia)) 46EX523 Iran))
! 1-838-278-11 POWER-SUPPLY CORD (WITH CONN.) 20 A-1804-894-A R3 MOUNT (Except (46EX520 Pakistan,
(46EX520 Australia) 46EX523 Iran))
! 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.) 21 4-256-392-01 BRACKET, PANEL (H)
(46EX520 Thailand) 22 4-256-391-01 BRACKET, PANEL C
! 1-838-273-11 POWER-SUPPLY CORD (WITH CONN.) 23 4-266-697-01 BEZEL(46 SYR)
(46EX520 Taiwan) 24 ! 1-811-326-11 LCD PANEL (LTY[Z]460HN02-001)
! 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.) 25 * 1-856-184-11 FRENEL LENS
(46EX523 Nigeria, Saudi Arabia) 26 A-1792-511-A HMS3 MOUNT
! 1-838-794-11 POWER-SUPPLY CORD (WITH CONN.) 27 A-1792-877-A HLR2 MOUNT(B-O)
(46EX523 Nigeria, Saudi Arabia) 28 1-489-443-11 SWITCH UNIT
9 4-275-412-31 REAR COVER(46) (Hotel) (Except (46EX520
Taiwan))
4-275-412-01 REAR COVER(46) (Except (46EX520 Taiwan))
4-275-412-11 REAR COVER(46) (46EX520 Taiwan)
4-275-412-41 REAR COVER(46) (Hotel) (46EX520 Taiwan)
10 4-265-034-01 LABEL(BAT-V REAR) (46EX520 Taiwan)
11 1-858-592-11 LOUDSPEAKER
12 4-256-424-01 BRACKET, SIDE (BAT-V MOLD)
13 ! 1-474-287-21 STATIC CONVERTER (TV)-GE3A

83
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-5. KDL-46EX520, 46EX523

6-5-2. Screws
Ref Part No Description
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
4-256-393-01
SCREW +PSW M3X6 W12
4-259-541-01
USER SCREW ST
2-990-421-41
SCREW, (+PSW) (M3X6)
4-268-126-01
SCREW, ORNAMENTAL M6X12
4-257-907-01
JOINT STAND
2-580-608-01
SCREW, +PSW M5X16
4-167-964-01
SCREW, +PWTP2 4X16

84
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-6. OTHER PARTS

REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION
6-6-1. KDL-22EX420, 22EX423
<ACCESSORIES AND PACKING> <MISCELLANEOUS>
******************************* **************************
! 1-569-008-33 ADAPTOR, CONVERSION 2P (22EX420 (Sogul Area, 4-159-298-01 SCREW, +PSW M4X10 (22EX420 Taiwan)
Singapore, Indonesia, Vietnam, Phillippines)) 2-580-602-11 SCREW, +PSW M4X12 (22EX420 (Hong Kong, Taiwan))
! 1-821-926-11 PLUG CONVERSION ADAPTOR (22EX420 South Africa) 2-580-602-01 SCREW, +PSW M4X12
! 1-822-631-11 PLUG CONVERSION ADAPTOR (22EX420 India) (Except 22EX420 (Taiwan. Hong Kong))
X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (22EX420 Taiwan) 2-580-663-02 SCREW, WOOD 3.8X20 (22EX420 Taiwan)
A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE (22EX423)
A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE (22EX420 Hong Kong) <REMOTE COMMANDER>
A-1809-340-A BATS I1 WXG PA COMPL SERVICE ***********************************
A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE (22EX420 Taiwan) 1-489-457-11 REMOTE COMMANDER (RM-CD013) (KDL-22EX420
* 4-267-400-01 CARTON, INDIVIDUAL (Taiwan)
* 4-260-858-01 CUSHION, LOWER (SYL22) 1-489-456-11 REMOTE COMMANDER (RM-GD020) (Except 22EX420
* 4-260-852-01 CUSHION, UPPER (SYL22) Taiwan)
4-268-265-11 MANUAL, INSTRUCTION (Except 22EX420 (Taiwan, Hong
Kong))
4-268-265-21 MANUAL, INSTRUCTION (22EX420 (Sogul Area, Singapore,
Indonesia, Vietnam, Phillippines, India, Thailand,
Malaysia), 22EX423)
4-268-265-31 MANUAL, INSTRUCTION (22EX420 Thailand)
4-266-094-11 MANUAL, INSTRUCTION (22EX420 Hong Kong)
4-268-464-11 MANUAL, INSTRUCTION (22EX420 Taiwan)

<CONNECTORS>
**********************
* 1-910-800-84 CONNECTOR ASSY 14P (CN6201 (G1A) - PANEL (1))
* 1-910-800-86 CONNECTOR ASSY 28P
(CN6001 (BAT-S) - CN6002 (BAT-S) - CN6701 (G1A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P (CN9005(BAT-S)-CN001(R3)(1))
* 1-838-831-11 FLEXIBLE FLAT CABLE I1 22WS (CN2000 (BAT-S) - PANEL
(1))
* 1-910-800-87 HARNESS ASSY (CN9006 (BAT-S) - CN100 (HLR2) - HMS3 -
SW / CN4601 (BAT-S) - SP (1))

85
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-6. OTHER PARTS

REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION
6-6-2. KDL-26EX420, 26EX423
<ACCESSORIES AND PACKING> <MISCELLANEOUS>
************************************************ *************************
! 1-569-008-33 ADAPTOR, CONVERSION 2P (26EX420 (Sogul Area, 4-159-298-01 SCREW, +PSW M4X10
Singapore, Indonesia, Vietnam, Phillippines)) 2-580-663-02 SCREW, WOOD 3.8X20
! 1-821-926-11 PLUG CONVERSION ADAPTOR(26EX420 South Africa)
<REMOTE COMMANDER>
! 1-822-631-11 PLUG CONVERSION ADAPTOR (26EX420 India)
**********************************
X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (26EX420 Taiwan)
1-489-457-11 REMOTE COMMANDER (RM-CD013)
* 4-267-915-01 CARTON, INDIVIDUAL 26EX420
( Taiwan)
* 4-260-876-01 CUSHION, LOWER (SYL26) 1-489-456-11 REMOTE COMMANDER (RM-GD020)
* 4-260-875-01 CUSHION, UPPER (SYL26) (except 26EX420 Taiwan)
4-268-265-11 MANUAL, INSTRUCTION
(except 26EX420 (Hong Kong, Taiwan)
4-268-265-21 MANUAL, INSTRUCTION (26EX420 (Sogul Area,
Singapore, Indonesia, Vietnam, Phillippines, Malaysia),
26EX423)
4-268-265-31 MANUAL, INSTRUCTION (26EX420 Thailand)
4-266-094-11 MANUAL, INSTRUCTION (26EX420 Hong Kong)
4-268-464-11 MANUAL, INSTRUCTION (26EX420 Taiwan)

<CONNECTORS>
*************************
* 1-910-800-94 CONNECTOR ASSY 14P (CN6201 (G1B) - PANEL (1))
* 1-910-800-95 CONNECTOR ASSY 28P
* 1-910-802-00 CONNECTOR ASSY 6P (CN9005(BAT-S)-N001(R3)(1))
* 1-838-832-11 FLEXIBLE FLAT CABLE I1 26WS
(CN2000 (BAT-S) - PANEL (1))
* 1-910-800-96 HARNESS ASSY

86
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-6. OTHER PARTS

REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION
6-6-3. KDL-32EX420, 32EX520, 32EX523
<ACCESSORIES AND PACKING> <CONNECTORS>
************************************* **********************
! 1--569-088-33 ADAPTOR, CONVERSION 2P * 1-910-801-03 CONNECTOR ASSY 28P
((32EX420, 32EX520) (Sogul Area, Singapore, Indonesia, (CN6001 (BAT-V) - CN6002 (BAT-V) - CN6704 (GE2A) (1))
Vietnam, Philippines)) * 1-910-802-00 CONNECTOR ASSY 6P (CN9005 (BAT-V) - CN001 (R3/RU)
! 1-822-631-11 PLUG CONVERSION ADAPTOR (1)) (Except 32EX520 Iran)
((32EX420, 32EX520) India) 1-838-883-11 FLEXIBLE FLAT CABLE I1 32S
! 1-821-926-11 PLUG CONVERSION ADAPTOR (32EX520 South Africa) (CN2001 (BAT-V) - PANEL (1))
X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (32EX520 Taiwan) (Except 32EX420)
* 4-261-808-02 BAG, PROTECTION (1100X850) (32EX420) * 1-838-833-11 FLEXIBLE FLAT CABLE I1 32WS (CN2000 (BAT-V) - PANEL
X-2549-819-1 BAG, SCREW ASSY(M) (1)) (32EX420)
* 4-267-917-11 CARTON, INDIVIDUAL (32EX523 Iran) * 1-910-801-07 HARNESS ASSY (CN9006 (BAT-V) - CN100 (HLR2) - HMS3
* 4-267-917-01 CARTON, INDIVIDUAL - SW / CN4601 (BAT-V) - SP (1))
(Except (32EX420, 32EX420 Australia Easel, 32EX523
* 4-267-916-01 CARTON, INDIVIDUAL (32EX420) <MISCELLENEOUS>
* 4-269-552-01 CARTON, INDIVIDUAL (32EX420 Australia Easel) *************************
* 4-260-881-01 CUSHION, LOWER (SYL32)(Except 32EX420 Australia 4-188-302-11 HEX WRENCH
Easel) 4-159-298-01 SCREW, +PSW M4X10(32EX520 Taiwan, 32EX420)
* 4-270-461-01 CUSHION, LOWER (SYL32P) (32EX420 Australia Easel) 2-580-663-02 SCREW, WOOD 3.8X20 (32EX520 Taiwan)
* 4-260-880-01 CUSHION, UPPER (SYL32) (Except 32EX420 Australia 4-100-136-01 SHEET (CORE), C (32EX523 (Iran))
Easel) 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
* 4-270-460-01 CUSHION, UPPER (SYL32P)(32EX420 Australia Easel) 2-580-592-01 SCREW, +PSW M3X8
4-268-265-11 MANUAL, INSTRUCTION
(Except 32EX520 (Taiwan, Hong Kong, Iran)) <REMOTE COMMANDER>
4-268-265-21 MANUAL, INSTRUCTION ((32EX420, 32EX520)(Sogul Area, **********************************
Singapore, Indonesia, Vietnam, Philippines, Malaysia), 1-489-457-11 REMOTE COMMANDER (RM-CD013) (32EX520 Taiwan)
32EX523 (Saudi Arabia, Nigeria)) 1-489-456-11 REMOTE COMMANDER (RM-GD020)(Except 32EX520
4-268-265-31 MANUAL, INSTRUCTION ((32EX420, 32EX520) Thailand) Taiwan)
4-266-094-11 MANUAL, INSTRUCTION (32EX520 Hong Kong)
4-268-464-11 MANUAL, INSTRUCTION (32EX520 Taiwan)
4-274-108-11 MANUAL, INSTRUCTION (32EX523 Iran)

87
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-6. OTHER PARTS

REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION
6-6-4. KDL-40EX520, 40EX523
<ACCESSORIES AND PACKING>
<MISCELLANEOUS>
************************************************
! 1-569-008-33 ADAPTOR, CONVERSION 2P (40EX520 (Sogul Area, Singapore, *****************************
Indonesia, Vietnam, Phillippines) 4-188-302-11 HEX WRENCH
! 1-821-926-11 PLUG CONVERSION ADAPTOR (40EX520 South Africa)
4-159-298-01 SCREW, +PSW M4X10 (40EX520 Taiwan)
! 1-822-631-11 PLUG CONVERSION ADAPTOR (40EX520 India)
2-580-608-01 SCREW, +PSW M5X16
X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (40EX520 Taiwan) 2-580-663-02 SCREW, WOOD 3.8X20 (40EX520 Taiwan)
X-2549-819-1 BAG, SCREW ASSY(M) 4-100-136-01 SHEET (CORE), C (40EX523 Iran)
* 4-267-918-01 CARTON, INDIVIDUAL (Except 40EX523 Iran)
* 4-267-918-21 CARTON, INDIVIDUAL (40EX523 Iran) <REMOTE COMMANDER>
* 4-260-887-01 CUSHION, LOWER (SYL40) ***************************************
* 4-260-886-01 CUSHION, UPPER (SYL40) 1-489-457-11 REMOTE COMMANDER (RM-CD013) (40EX520 Taiwan)
4-268-265-11 MANUAL, INSTRUCTION 1-489-456-11 REMOTE COMMANDER (RM-GD020)
(Except (40EX520 (Taiwan, Hong Kong), 40EX523 Iran)) (except 40EX520 Taiwan)
4-268-265-21 MANUAL, INSTRUCTION
(40EX520 (Sogul Area, Singapore, Indonesia, Vietnam,
Phillippines, Malaysia),40EX523 (Saudi Arabia, Nigeria))
4-268-265-31 MANUAL, INSTRUCTION (40EX520 Thailand)
4-266-094-11 MANUAL, INSTRUCTION (40EX520 Hong Kong)
4-268-464-11 MANUAL, INSTRUCTION (40EX520 Taiwan)
4-274-108-11 MANUAL, INSTRUCTION (40EX523 Iran)

<CONNECTORS>
*************************
* 1-910-801-57 CONNECTOR ASSY 28P
(CN6001 (BAT-V) - CN6002 (BAT-V) - CN6201 (GE3A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P
(CN9005 (BAT-V/L) - CN001 (R3/RU) (1))
* 1-838-881-11 FFC CABLE I1 40S (CN2001 (BAT-V) - PANEL (1))
* 1-910-801-62 HARNESS ASSY
(CN9006 (BAT-V) - CN100 (HLR2) - HMS3 - SW / CN4601 (BAT-V)
- SP (1))

88
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520
RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523
RM-GD020

6-6. OTHER PARTS

REF NO. PART NO. DESCRIPTION REF NO. PART NO. DESCRIPTION
6-6-5. KDL-46EX520, 46EX523
<ACCESSORIES AND PACKING > <MISCELLANEOUS>
************************************************ *****************************
! 1-569-008-33 ADAPTOR, CONVERSION 2P (46EX520 (Sogul Area, Singapore, 4-188-302-11 HEX WRENCH
Indonesia, Vietnam, Phillippines)) 4-159-298-01 SCREW, +PSW M4X10 (46EX520 Taiwan)
! 1-821-926-11 PLUG CONVERSION ADAPTOR (46EX520 South Africa) 2-580-663-02 SCREW, WOOD 3.8X20 (46EX520 Taiwan)
! 1-822-631-11 PLUG CONVERSION ADAPTOR (46EX520 India) 7-685-646-79 SCREW +BVTP 3X8 TYPE2
X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (46EX520 Taiwan) 4-100-136-01 SHEET (CORE), C (46EX520 Pakistan, 46EX523 Iran)
X-2560-379-1 BAG, SCREW ASSY(L)
<REMOTE COMMANDER>
* 4-267-919-01 CARTON, INDIVIDUAL
***************************************
(Except 46EX523 Iran) .
1-489-457-11 REMOTE COMMANDER (RM-CD013) (46EX520 Taiwan)
* 4-267-919-21 CARTON, INDIVIDUAL (46EX523 Iran)
1-489-456-11 REMOTE COMMANDER (RM-GD020)
* 4-260-890-01 CUSHION, LOWER (SYL46)
(except 46EX520 Taiwan)
* 4-260-889-01 CUSHION, UPPER (SYL46)
4-268-265-11 MANUAL, INSTRUCTION (Except (46EX520 Taiwan, 46EX523
Iran))
4-268-265-21 MANUAL, INSTRUCTION (40EX520 (Sogul Area, Singapore,
Indonesia, Vietnam, Phillippines, Malaysia),40EX523 (Saudi
Arabia, Nigeria))
4-268-265-31 MANUAL, INSTRUCTION (46EX520 Thailand)
4-268-464-11 MANUAL, INSTRUCTION (46EX520 Taiwan)
4-274-108-11 MANUAL, INSTRUCTION (46EX523 Iran)

<CONNECTORS>
*************************
* 1-910-801-67 CONNECTOR ASSY 28P
(CN6001 (BAT-V) - CN6002 (BAT-V) - CN6201 (GE3A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P (CN9005 (BAT-V/L) - CN001 (R3/RU)
(1))(Except 46EX523)
* 1-838-880-11 FFC WITH CONNECTOR I1 46S
(CN2001(BAT-V)-PANEL(1))
* 1-910-801-73 HARNESS ASSY (CN9006 (BAT-V) - CN100 (HLR2) - HMS3 - SW
/ CN4601 (BAT-V) - SP (1))

Sony Corporation
Sony EMCS (Malaysia) Sdn. Bhd. English
9-888-126-01 TVEG ©2011.01

89
GB01COV.book Page 1 Wednesday, December 15, 2010 1:22 PM

4-268-265-12(1)

LCD Getting Started

Using Your BRAVIA TV

Digital Colour TV Network Setup

Operating Instructions Additional Information

KDL-55EX723 / 55EX720 / 46EX723 / 46EX720 / 46EX523 / 46EX520 / 46CX523 / 46CX520 / 40EX723

KDL-40EX720 / 40EX523 / 40EX520 / 40CX523 / 40CX520 / 32EX723 / 32EX720 / 32EX523 / 32EX520
KDL-32EX420 / 32CX523 / 32CX520 / 26EX423 / 26EX420 / 22EX423 / 22EX420

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 2 Wednesday, December 15, 2010 1:22 PM

Introduction Trademark information

Thank you for choosing this Sony product. is a registered trademark of the DVB
Before operating the TV, please read this Project.
manual thoroughly and retain it for future HDMI, the HDMI Logo, and High-
reference. Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
~ and other countries.
• Instructions about “Installing Wall Mount
Bracket” are included within this TV’s DLNA® and DLNA CERTIFIED® are
instructions manual. trademarks and/or service marks of Digital Notes for Australia and
Living Network Alliance.
• The illustrations used in this manual are of New Zealand model
the KDL-40EX520 series unless otherwise DivX® is a video file compression
state. technology, developed by DivX, Inc. This product is ENERGY RATING
• The illustrations of the remote control DivX®, DivX Certified®, and associated qualified in the “Home” mode. ENERGY
used in this manual are of the logos are trademarks of DivX, Inc. and are RATING is a program designed to promote
RM-GD019 unless otherwise stated. used under license. energy efficient products and practices.
• Before operating the TV, please read ABOUT DIVX VIDEO: DivX® is a digital • When the TV is initially set up, it is
“Safety Information” (page 31). Retain video format created by DivX,Inc. This is an designed to meet ENERGY RATING
this manual for future reference. official DivX Certified device that plays requirements while maintaining optimum
DivX video. Visit www.divx.com for more picture quality.
information and software tools to convert • Changes to certain features, settings, and
your files into DivX video. functionalities of this TV (e.g. TV Guide,
Picture/Sound, Eco-Setting) can slightly
ABOUT DIVX VIDEO-ON-DEMAND: change the power consumption.
This DivX Certified® device must be Depending upon such changed settings (e.g.
registered in order to play DivX Video-on- “Shop” mode), the power consumption may
Demand (VOD) content. To generate the vary which possibly could exceed the stated
registration code, locate the DivX VOD energy rating.
section in the device setup menu. Go to
vod.divx.com with this code to complete the To reset the TV to ENERGY RATING
registration process and learn more about qualified settings, select “Home” mode from
DivX VOD. the initial set-up procedure in “Factory
Settings” under the “Set-up” menu.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
IMPORTANT
Laboratories. INFORMATION
“BRAVIA” and are trademarks If a television is not positioned in a
of Sony Corporation. sufficiently stable location, it can be
TrackID is a trademark or registered potentially hazardous due to falling. Many
trademark of Sony Ericsson Mobile injuries, particularly to children, can be
Communications AB. avoided by taking simple precautions such
as:
Music and video recognition technology and
related data are provided by Gracenote®. • Using cabinets or stands recommended by
the manufacturer of the television.
Gracenote is the industry standard in music
recognition technology and related content • Only using furniture that can safely
support the television.
delivery. For more information, please visit
• Ensuring the television is not overhanging
www.gracenote.com. the edge of the supporting furniture.
CD, DVD, Blu-ray Disc, and music and
• Not placing the television on tall furniture
video-related data from Gracenote, Inc., (for example, cupboards or bookcases)
copyright © 2000-present Gracenote. without anchoring both the furniture and
Gracenote Software, copyright © 2000- the television to a suitable support.
present Gracenote. One or more patents • Not standing the televisions on cloth or
owned by Gracenote apply to this product other materials placed between the
and service. See the Gracenote website for a television and supporting furniture.
nonexhaustive list of applicable Gracenote • Educating children about the dangers of
patents. Gracenote, CDDB, MusicID, climbing on furniture to reach the
MediaVOCS, the Gracenote logo and television or its controls.
logotype, and the “Powered by Gracenote”
logo are either registered trademarks or Notice for customers in
trademarks of Gracenote in the United States the South Africa
and/or other countries.
The Euro/South Africa converter plug
should be fitted as follows.
1 Insert the power
supply or CEE7 plug
in to the converter
plug.
2 Use an appropriate
screwdriver to attach
the screw tightly
without damaging the
screw head.
3 TEST: Grip the
converter plug, and
pull the VDE cord set/
transformer to ensure
it is fully secure, if not
then increase the torque setting and
further tighten.
Re-test.
The converter plug is now ready for use.

2 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 3 Wednesday, December 15, 2010 1:22 PM

Notice for customers in LCD Screen (Caution about handling the

India • Although the LCD screen is made with remote control)
high-precision technology and 99.99% or
Attach the supplied plug adaptor. more of the pixels are effective, black dots Notes
may appear or bright points of light (red, • Observe the correct polarity when
blue, or green) may appear constantly on inserting batteries.
the LCD screen. This is a structural • Do not use different types of batteries
property of the LCD screen and is not a together or mix old and new batteries.
malfunction. • Dispose of batteries in an environmentally
• Do not push or scratch the front filter, or friendly way. Certain regions may
place objects on top of this TV set. The regulate the disposal of batteries. Please
image may be uneven or the LCD screen consult your local authority.
may be damaged. • Handle the remote with care. Do not drop
• If this TV set is used in a cold place, a or step on it, or spill liquid of any kind
smear may occur in the picture or the onto it.
picture may become dark. This does not • Do not place the remote in a location near
indicate a failure. These phenomena
Location of the disappear as the temperature rises.
a heat source, a place subject to direct
sunlight, or a damp room.
identification label • Ghosting may occur when still pictures are
displayed continuously. It may disappear
Labels for Model No. and Power Supply
rating (in accordance with applicable safety
after a few moments. Disposal of the TV set
• The screen and cabinet get warm when
regulation) are located on the rear of the TV.
this TV set is in use. This is not a (Australian model only)
Precautions malfunction.
• The LCD screen contains a small amount Disposal of Old
Viewing the TV of liquid crystal. Some fluorescent tubes Electrical &
used in this TV set also contain mercury.
• Some people may experience discomfort Follow your local ordinances and Electronic
(such as eye strain, fatigue, or nausea) regulations for disposal. Equipment
while watching 3D video images or
playing 3D video games. Sony Handling and cleaning the (Applicable in the
recommends that all viewers take regular European Union
breaks while watching 3D video images or
screen surface/cabinet of the
playing 3D video games. The length and TV set and other
frequency of necessary breaks will vary Be sure to unplug the AC power cord European countries with
from person to person. You must decide connected to the TV set from AC power
what works best. If you experience any separate collection systems)
discomfort, you should stop watching the outlet before cleaning.
This symbol is on the remote control.
3D video images or playing 3D video To avoid material degradation or screen
games until the discomfort ends; consult a coating degradation, observe the following
doctor if you believe necessary. You precautions.
should also review (i) the instruction
manual of any other device or media used • To remove dust from the screen surface/
with this television and (ii) our website cabinet, wipe gently with a soft cloth. If
(http://www.sony-asia.com/support) for dust is persistent, wipe with a soft cloth
the latest information. The vision of young slightly moistened with a diluted mild
children (especially those under six years detergent solution.
old) is still under development. Consult • Do not spray water or detergent directly
your doctor (such as a pediatrician or eye on the TV set. It may drip to the bottom of
doctor) before allowing young children to the screen or exterior parts, and may cause
watch 3D video images or play 3D video a malfunction.
games. Adults should supervise young • Never use any type of abrasive pad,
children to ensure they follow the alkaline/acid cleaner, scouring powder, or
recommendations listed above. volatile solvent, such as alcohol, benzene,
• When using the simulated 3D function, thinner or insecticide. Using such
please note that the displayed image is materials or maintaining prolonged
modified from the original due to the contact with rubber or vinyl materials may
conversion done by this television. result in damage to the screen surface and
• View the TV in moderate light, as viewing cabinet material.
the TV in poor light or during long period • Periodic vacuuming of the ventilation
of time, strains your eyes. openings is recommended to ensure to
• When using headphones, adjust the proper ventilation.
volume so as to avoid excessive levels, as • When adjusting the angle of the TV set,
hearing damage may result. move it slowly so as to prevent the TV set
from moving or slipping off from its table
stand.
Optional Equipment
Keep optional components or any equipment
emitting electromagnetic radiation away
from the TV set. Otherwise picture
distortion and/or noisy sound may occur.

3 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 4 Wednesday, December 15, 2010 1:22 PM

Table of Contents

Getting Started
Checking the accessories ........................................................................................................ 6
Inserting batteries into the remote............................................................................................ 6
1: Attaching the Table-Top Stand ............................................................................................ 7
2: Adjusting the viewing angle of the TV .................................................................................. 8
3: Connecting an antenna/cable/VCR...................................................................................... 9
4: Connecting audio/video devices ........................................................................................ 10
5: Preventing the TV from toppling over................................................................................. 10
6: Organizing the AC power cord/Bundling the cables........................................................... 10
7: Performing the initial set-up ............................................................................................... 11

Using Your BRAVIA TV

Watching the TV..................................................................................................................... 12
Selecting various functions and settings (Home Menu) ......................................................... 14
Displaying Operating Instructions (i-Manual) ......................................................................... 16

Network Setup
Preparing a wired network ..................................................................................................... 18
Preparing a wireless LAN....................................................................................................... 18
Setting up the Internet connection ......................................................................................... 19
If you cannot connect to the Internet...................................................................................... 20
Adjusting the server display settings...................................................................................... 20

Additional Information
Troubleshooting ..................................................................................................................... 22
Specifications ......................................................................................................................... 23
Installing the Accessories (Wall-Mount Bracket).................................................................... 25
Safety Information .................................................................................................................. 31

4 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 5 Wednesday, December 15, 2010 1:22 PM

After setting up your BRAVIA TV and learning basic operations with

this manual, see the built-in manual (i-Manual) for further explanation
of the features of your TV.

This TV has a built-in manual (i-Manual).

To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 16 of
this manual. Contents of the i-Manual may differ depending on the model/region/area.

Contents of the i-Manual

How to Use i-Manual Settings/Home Menu

About the Home Menu
“BRAVIA” TV Features
Settings
3D Feature Display
Presence Sensor Sound
“BRAVIA” Internet Video System Settings
Internet Widgets i-Manual
Wireless LAN Ready Digital Set-up
“BRAVIA” Sync with “Control for HDMI” Analogue Set-up
TrackID™/Music Search/Video Search External Inputs
Network
Watching TV
Product Support
3D Feature
Digital Electronic Programme Guide Using Other Equipment/Internet
Programme Guide for Digital Text VCR/DVD Player
Favourites Audio System
Wide Mode USB Device (e.g. Digital Camera)
Picture Mode Picture Frame
Text HDMI Equipment
Photos/Music/Videos Internet/Wireless LAN
Twin Picture (PIP) Home Network
Twin Picture (P&P) PC
Programming the Remote

Parts Description
Remote
TV Controls and Indicators
Terminals

Troubleshooting
Index
Bookmarks

5 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 6 Wednesday, December 15, 2010 1:22 PM

Getting Started

Checking the accessories Inserting batteries into the

Remote (1) remote
Size AAA batteries (R3 type) (2) B KDL-55/46/40/32EX723 and
Table-Top Stand (1)*1 KDL-55/46/40/32EX720
Fixing screws for Table-Top Stand
(M4 × 12) (2) (for KDL-26/22EX42x)
Fixing screws for Table-Top Stand
(M5 × 16) (3) (for KDL-55/46/40/32EX72x,
KDL-46/40/32EX52x, KDL-46/40/32CX52x,
KDL-32EX420)
Assembling screws for Table-Top Stand
(M4 × 12) (2) (for KDL-26/22EX42x)
Assembling screws for Table-Top Stand
(M5 × 16) (2) (for KDL-32EX420 (Australia
model))
Assembling screws for Table-Top Stand
(M6 × 14) (4) (for KDL-55/46EX72x,
KDL-46EX52x, KDL-46CX52x) 1 Remove the protection sheet.
Assembling screws for Table-Top Stand 2 Push and slide the cover upward.
(M6 × 14) (3) (for KDL-40/32EX72x,
KDL-40/32EX52x, KDL-40/32CX52x, B KDL-46/40/32EX523, KDL-46/40/32EX520,
KDL-32EX420 (except Australia model)) KDL-46/40/32CX523, KDL-46/40/32CX520,
Hexagon wrench (1) (except KDL-32EX420 KDL-26/22EX423 and KDL-32/26/22EX420
(Australia model), KDL-26/22EX42x)
Operating Instructions (this manual) and
other documents

*1 Assemble the Table-Top Stand with the supplied

assembling screws. Refer to the supplied Table-Top
Stand leaflet to assemble the stand.
1 Remove the protection sheet.
2 Push and lift the cover to open.

6 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 7 Wednesday, December 15, 2010 1:22 PM

B KDL-55/46/40/32EX723,
1: Attaching the Table-Top KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520,
Stand KDL-46/40/32CX523, KDL-46/40/32CX520
1 Refer to the supplied Table-Top Stand and KDL-32EX420 (except Australia model)
leaflet for proper attachment for some

Getting Started
TV models.
2 Place the TV set on the Table-Top Stand.
B KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520,
KDL-46/40/32CX523, KDL-46/40/32CX520
and KDL-32EX420 (except Australia model)
B KDL-32EX420 (Australia model)

Guide
pins

B KDL-32EX420 (Australia model)

B KDL-26/22EX423 and KDL-26/22EX420

Guide
pins

~
• Align the TV from the top, slide it in until the guide
pins cannot be seen.
B KDL-26/22EX423 and KDL-26/22EX420 ~
• If using an electric screwdriver, set the torque at
approximately 15 kgf·cm {1.5 N·m}.

Detaching the Table-Top Stand

from the TV
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 3.
3 Fix the TV to the Table-Top Stand ~
according to the arrow marks that • Do not remove the Table-Top Stand for any reason
guide the screw holes using the supplied other than to install corresponding accessories on
screws. the TV.
• When removing the Table-Top Stand from the TV,
lay the display face down on a stable work surface
that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the work
surface.

7 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 8 Wednesday, December 15, 2010 1:22 PM

B KDL-26/22EX423 and KDL-26/22EX420

2: Adjusting the viewing
0° - 6°
angle of the TV
This TV can be adjusted within the angles as
illustrated.

Angle adjustment (Swivel)

(except KDL-26/22EX42x)
~
• When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over. B KDL-32EX420 (Australia model)
B Except KDL-32EX420 (Australia model)
0°
20° 20°

20° 20°

B KDL-32EX420 (Australia model)

15° 15°

15° 15°

Angle adjustment (Tilt)

(except KDL-46/40/32CX523/
6°
KDL-46/40/32CX520)
~
• Be careful not to pinch your fingers between the TV
and stand when adjusting the angle.
B KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720,
KDL-46/40/32EX523, KDL-46/40/32EX520
and KDL-32EX420 (except Australia model)

0° - 6°
~
• Ensure that there are no objects in front of the TV.
IR Sensor

3D Sync Transmitter
(KDL-55/46/40/32EX72x
only)
Presence Sensor
• Do not expose the Presence Sensor to direct sunlight
or other strong light, as malfunction may occur.

8 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 9 Wednesday, December 15, 2010 1:22 PM

Connecting an antenna/cable and VCR

3: Connecting an antenna/
cable/VCR
Connecting an antenna/cable

Getting Started
Antenna cable
(not supplied)

AV cable
(not supplied)

Antenna cable Antenna cable

(not supplied) (not supplied)

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with HDMI

VCR

Set Top Box/recorder (e.g. DVD recorder)

9 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 10 Wednesday, December 15, 2010 1:22 PM

4: Connecting audio/video 5: Preventing the TV from

devices toppling over

Antenna cable
(not supplied)

AV cable
(not supplied)

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.
2 Install a machine screw (M4 × 10, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
Antenna cable
(not supplied)
screw with a strong cord (not supplied).

6: Organizing the AC power

cord/Bundling the cables
B KDL-46/40/32CX52x

DVD Player

AC power cord

B Except KDL-46/40/32CX52x
~
• Before bundling the cables, remove the cable holder
from the AC cover (see step 1 and 2). Reuse the
cable holder (see step 3) to bundle the other cables
(see step 4).
• Do not bundle the AC power cord together with
other cables.

10 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 11 Wednesday, December 15, 2010 1:22 PM

KDL-55/46/40/32EX723, 7: Performing the initial set-

KDL-55/46/40/32EX720,
KDL-46/40/32EX523, up
KDL-46/40/32EX520 and
KDL-32EX420 (except Australia model)
Except For KDL-46/40/
KDL-46/40/32CX52x 32CX52x

Getting Started
1 2

3 4

KDL-32EX420 (Australia model)

1 2
1 Connect the TV to your AC power outlet
(mains socket).
2 Press 1 on the TV. The " (power)
indicator will light green.
When you switch on the TV for the first time,
3 4
the Language menu appears on the screen.
KDL-26/22EX423 and KDL-26/22EX420 ~
• When you turn on the TV for the first time, the TV
requires some internal processing for optimization
before you can perform the initial setup. There will
1 2 be no picture and sound, and the timer indicator on
the front of the TV blinks orange for about 40
seconds. Do not turn off the TV during this process.
This process has been completed at the factory on
some TVs.

3 4

*
3

* When installing on the wall, attach the cable holder

under the terminals.

Follow the instructions on the screen.

Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press .
2 Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
11 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 12 Wednesday, December 15, 2010 1:22 PM

Using Your BRAVIA TV

Watching the TV

1 Turn on the TV.

Press 1 on the TV to turn on the TV.

2 Select a mode.

3 Select a TV channel.

2 To use Digital Electronic Programme Guide

Press GUIDE in digital mode to display the programme
GUIDE
guide.

Use with 0-9 to select digital channels. For channel

3 numbers 10 and above, press the next digit quickly.

z
• The number 5, N, PROG + and
AUDIO buttons on the remote
have a tactile dot. Use the tactile
dots as a reference when
operating the TV.

12 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 13 Wednesday, December 15, 2010 1:22 PM

Parts and controls of the remote

Use the supplied remote to control your TV. Basic remote operations are explained here. For details on
all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 16).

1 :/1
Press to turn the TV on and off from standby mode.
2 i-MANUAL
Displays the built-in manual (i-Manual).

Using Your BRAVIA TV

3 SYNC MENU
Displays the BRAVIA Sync menu to operate the BRAVIA
Sync-compatible equipment that is connected to the TV.
4 F/f/G/g/
Moves the on-screen cursor, and confirm the item.
5 OPTIONS
Displays a list of convenient functions and menu shortcuts.
The menu items vary based on the current input and/or
content.
6 Coloured buttons
When the coloured buttons are available, an operation guide
appears on the screen.
7 PROG/CH +/–/Number buttons
For KDL-55/46/40/32EX72x Select channels in the TV mode.
8 2 +/–
Adjusts the volume.

Rear of Remote Control

13 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 14 Wednesday, December 15, 2010 1:22 PM

Selecting various functions and settings (Home Menu)

You can select all the features from the Home menu.
See page 15 for the Home menu map.

1 Press HOME.

2 Press F/f/G/g/ to select items.

2
1, 3 To select items in the Home menu (e.g.,
selecting “Settings”)
1 Press G/g to select “Settings”.
The contents of “Settings” are displayed on the
right.
2 Press F/f to select “Display”.
3 Press to launch the menu.
According to the screen instruction, press F/f/G/
g to select items and press to confirm.

3 Press HOME to exit.

14 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 15 Wednesday, December 15, 2010 1:22 PM

Home menu map

After pressing HOME on the remote control, following icons are displayed as categories. The
categories are available depending on your TV model, region, country and broadcasting conditions.

TV You can select a list of TV channels, or a programme guide.

Media You can enjoy photo/music/video content via USB devices or the
home network.
Inputs You can select equipment connected to the TV.

Using Your BRAVIA TV

Favourites/History Provides quick access to your frequently used and recently
viewed items, such as TV channels, external inputs or your media
files.
Settings Contains all of the necessary configurations to customise your
TV settings.

Widgets Provides access to Widgets.

Applications You can enjoy various applications such as “Music Search”,

“Internet Browser”, etc.

Qriocity Provides access to the “Qriocity” online service.

Internet Content You can enjoy Internet content services.

Recommendations Presents recommendations for programmes you may like, based

on your viewing history.

15 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 16 Wednesday, December 15, 2010 1:22 PM

Displaying Operating Instructions (i-Manual)

Operating instructions are built into your BRAVIA TV and can be displayed on the screen.
To learn more about your TVs features, access your i-Manual with the touch of a button.

1 Press i-MANUAL.

1
2 Press F/f/G/g/ to select items.

2
To select items in the i-Manual
1 Press F/f to select an item.
The contents in the item are displayed on the
right as the second layer.
2 Press g to move to the second layer.
3 Press F/f to select an item from the second
layer.
A digest of the item is displayed on the right.
If the third layer is available, repeat this step to
display the digest of the item.
4 Press g to select an item.
The content is displayed.

16 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 17 Wednesday, December 15, 2010 1:22 PM

Description of the i-Manual screen

Press G to go back to the previous page

Press f to go to the next page

Page number/Total page number

Press RETURN to go back to the previous page

Using Your BRAVIA TV

Press to launch the function

To use the bookmark

The i-Manual has a bookmark function. Pages can be bookmarked with coloured buttons, according to
the instructions at the bottom of the screen. To access your registered bookmarks, go to the top page of
the i-Manual and select “Bookmarks”.

To memorise the last displayed page

i-Manual memorises the last displayed page. When in the i-Manual screen, press i-MANUAL to return
to the TV screen. If you press i-MANUAL again, the information you saw last time appears. For
viewing from the top page of the i-Manual, return to the top page according to the instructions on
screen, or press HOME and select “i-Manual” of “Settings” in the Home menu.

~
• Last page memory is automatically reset when you switch the TV to standby mode.

17 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 18 Wednesday, December 15, 2010 1:22 PM

Network Setup
When you connect this TV to the Internet, you
can enjoy multiple functions: displaying a Preparing a wireless LAN
photograph that shows its location on the map, Wireless LAN Ready lets you easily access the
enjoying Internet video, etc. For details on the Internet and your home network with the USB
functions, refer to the i-Manual. Wireless LAN Adaptor UWA-BR100 (as of
~ January 2010). By inserting the USB Wireless
• You will need to contract with an Internet service LAN Adaptor into your TV’s USB port, you can
provider to connect to the Internet.
easily create a cable-free network. Before setting
up the wireless LAN function of the TV, be sure
to set up a wireless LAN router.
Preparing a wired network

Internet

Modem
with router
functions
or

TV ~
Router • The USB Wireless LAN Adaptor is available as an
optional accessory, depending on your TV model.
Modem

Internet

~
• For LAN connections, use a Category 7 cable (not
supplied).

18 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 19 Wednesday, December 15, 2010 1:22 PM

For security purpose, “WPS (PIN)” provides a

Setting up the Internet PIN code for your router. PIN code is renewed
connection every time you select “WPS (PIN)”.

Using the network feature you can connect the 1 Press HOME, then select >
TV to the Internet. The set-up procedure differs “Network” > “Network Set-up”.
depending on the type of network and LAN
router. Before setting up the Internet connection,
2 Select “Wireless Set-up”.
be sure to set up a LAN router. Check your 3 Select “WPS (Push Button)” for Push
wireless LAN environment using the following Button method or “WPS (PIN)” for PIN
chart. method.
~
Wireless LAN • Button name of the WPS may differ depending
on the router (e.g. AOSS button).
NO
Secure Wireless LAN?
k Type 3 4 Follow the instructions on the set-up
screen.
YES m

Network Setup
Do you use a wireless LAN NO
router compatible with Wi-Fi k Type 2 Type 2: Secured network without
Protected Set-up (WPS)? Wi-Fi protected Set-up (WPS)
YES m To set up a wireless LAN, SSID (wireless
Type 1*
network name) and security key (WEP or WPA
Wired LAN , Type 4 key) will be required. If you do not know them,
consult the instruction manual of your router.
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-Touch 1 Press HOME, then select >
Secure System (AOSS). Most of the latest routers “Network” > “Network Set-up”.
have this function. Check your router.
2 Select “Wireless Set-up”.

Type 1: Follow the configuration for “Secured

3 Select “Scan”, then select a network
from the list of scanned wireless
Network with Wi-Fi Protected Set-up (WPS)”.
networks.
Type 2: Follow the configuration for “Secured
Network without Wi-Fi Protected Set-up 4 Follow the instructions on the set-up
(WPS)”. screen.
Type 3: Follow the configuration for ~
“Unsecured Network with Any Type of Wireless • If you use WPS for network set-up, the security
LAN Router”. settings of the wireless LAN router activate, and any
Type 4: Follow the configuration for “Wired equipment previously connected to the wireless
network set-up”. LAN in a non-secure status will be disconnected
from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or, you
Type 1: Secured network with can deactivate the security settings of the wireless
Wi-Fi protected Set-up (WPS) LAN router, and then connect the equipment to a
TV in a non-secure status.
The WPS standard makes security of a wireless
home network as straightforward as pressing the
WPS button on the wireless LAN router. Before
setting up a wireless LAN, check the location of
the WPS button on the router and verify how to
use it.

(Continued) 19 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 20 Wednesday, December 15, 2010 1:22 PM

Type 3: Unsecured network with Viewing the network status

any type of wireless LAN router You can confirm your network status.
To set up a wireless LAN, SSID (wireless
network name) will be required.
1 Press HOME, then select >
“Network” > “Network Set-up”.
1 Press HOME, then select > 2 Select “View Network Status”.
“Network” > “Network Set-up”.
2 Select “Wireless Set-up”.
3 Select “Scan”, then select a network If you cannot connect to the
from the list of scanned wireless Internet
networks.
Use the diagnosis to check possible causes for
4 Follow the instructions on the set-up network connection failures, and settings.
screen.
~
1 Press HOME, then select >
“Network” > “Network Set-up”.
• Security key (WEP or WPA key) will not be
required because you do not need to select any 2 Select “View Network Status”.
security method in this procedure.
3 Select “Check Connection”.
This may take a several minutes. You
Type 4: Wired network set-up cannot cancel the diagnosis after
Enter the respective alphanumeric values for selecting “Check Connection”.
your router if necessary. The items that need to
be set (e.g. IP Address, Subnet Mask, DHCP)
may differ depending on the Internet service Adjusting the server display
provider or router. For details, refer to the
instruction manuals provided by your Internet
settings
service provider, or those supplied with the You can select home network servers to be
router. displayed on the Home Menu. Up to 10 servers
can be displayed in the Home Menu
1 Press HOME, then select > automatically.
“Network” > “Network Set-up”.
2 Select “Wired Set-up”.
1 Press HOME, then select >
“Network” > “Home Network Setup”.
3 Select “Auto” to set the IP Address and
2 Select “Server Display Settings”.
proxy server automatically, or “Custom”
to set them manually. 3 Select the server you want to display on
the Home Menu, and adjust the settings.
4 Follow the instructions on the set-up
screen.

20 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 21 Wednesday, December 15, 2010 1:22 PM

If you cannot connect to your home

network
The TV detects if the server is being correctly
recognised when you cannot connect it to your
home network. If the diagnostic results indicate a
failure, check possible causes, and network
connections and settings.

1 Press HOME, then select >

“Network” > “Home Network Setup”.
2 Select “Server Diagnostics”.
The server diagnostic starts. When the server
diagnostic is complete, the diagnostic result
list appears.

Network Setup

21 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 22 Wednesday, December 15, 2010 1:22 PM

Additional Information

Troubleshooting
When the 1 (standby) indicator is flashing, count how many times it flashes (interval
time is three seconds).
Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service
centre of how the indicator flashes (number of flashes).

When the 1 (standby) indicator is not flashing, check the items in the table as follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by
qualified service personnel.

Condition Explanation/Solution
There is no picture (screen • Check the antenna/cable connection.
is dark) and no sound. • Connect the TV to the AC power and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press "/1.
Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright
bright points appear on the points (pixels) on the screen do not indicate a malfunction.
screen.
Some programmes cannot • Check the antenna or dish.
be tuned.
The TV turns off • Check if the “Sleep Timer” is activated, or confirm the “Duration”
automatically (the TV setting of “On Timer”.
enters standby mode). • Check if the “Idle TV Standby” is activated.
• Check if the “Presence Sensor” is activated. When no viewer is
detected in front of the TV for a preset time, the picture automatically
turns off, while leaving only the TV sound on. Additionally, after 30
minutes in picture off mode, the TV will switch to standby mode.
The remote does not • Replace the batteries.
function. • Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock” • Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
password has been
forgotten.
The TV surrounds become • When the TV is used for an extended period, the TV surrounds
warm. become warm.
You may feel hot when touching there by the hand.

22 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 23 Wednesday, December 15, 2010 1:22 PM

Specifications
System
Panel system LCD (Liquid Crystal Display) Panel
TV system Analogue: B/G, I, D/K, M, L
Digital: DVB–T
Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41
VHF: 0–12, 5A, 9A/UHF: 28–69/CATV: S01–S03, S1–S44 (Australia)
VHF: 1–11 (New Zealand)
D/K: VHF: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2–A13,
A14–A79
Digital: VHF/UHF, UHF (New Zealand only)
Sound output 10 W + 10 W (KDL-55/46/40/32EX72x, KDL-46/40/32EX52x, KDL-46/40/32CX52x, KDL-32EX420)
8 W + 8 W (KDL-26/22EX42x)
Input/Output jacks
Antenna (aerial)/cable 75 ohm external terminal for VHF/UHF
/ 2 COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
2 Video input (phono jacks)
COMPONENT IN Audio input (phono jacks)
HDMI IN1, 2, 3, 4 Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
(except KDL-26/22EX42x) Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN4 only)
ARC (Audio Return Channel) (HDMI IN 1 only)

Additional Information
PC Input
HDMI IN1, 2 Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i
(for KDL-26/22EX42x) Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI IN2 only)
ARC (Audio Return Channel) (HDMI IN 1 only)
PC Input
1 Video input (phono jack)
1 Audio input (phono jacks)
DIGITAL AUDIO OUT Digital optical jack (Two channel linear PCM, Dolby Digital)
(OPTICAL)
AUDIO OUT/i Audio output (phono jacks)
Headphones jack
PC IN PC Input (Mini D-sub 15-pin)
PC audio input (minijack)
USB port
LAN 10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)

Model name KDL- 55EX72x 46EX72x 46EX52x 46CX52x 40EX72x 40EX52x 40CX52x
Power and others
Power requirements 110 V – 240 V AC, 50/60 Hz
Screen size (measured Approx. Approx. 116.8 cm/46 inches Approx. 101.6 cm/40 inches
diagonally) 138.8 cm/
55 inches
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)
Power consumption Indicated on the rear of the TV
Dimensions (Approx.) (w × h × d)
with Table-Top Stand (mm) 1269 × 799 × 1078 × 690 × 1078 × 690 × 1122 × 712 ×
943 × 616 × 250
991 × 636
315 260 260 275 × 250
without Table-Top Stand 1269 × 769 × 1078 × 660 × 1078 × 660 × 1122 × 682 × 991 × 606
943 × 586 × 42
(mm) 41 42 42 74 × 71
Mass (Approx.)
with Table-Top Stand (kg) 25.4 17.9 17.8 20.7 14.4 16.3
without Table-Top Stand
20.2 14.3 14.2 17.1 11.2 12.9
(kg)
Supplied accessories See “Checking the accessories” (page 6).

(Continued) 23 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 24 Wednesday, December 15, 2010 1:22 PM

Model name KDL- 55EX72x 46EX72x 46EX52x 46CX52x 40EX72x 40EX52x 40CX52x
Optional accessories Wall-Mount Bracket: SU-WL50B
USB Wireless LAN Adaptor
3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-55/46/40EX723,
KDL-55/46/40EX720)
Operating temperature 0 ºC – 40 ºC
Operating humidity 10 % – 80 % RH (non-condensing)

Model name KDL- 32EX72x 32EX52x 32CX52x 32EX420*1 32EX420*2 26EX42x 22EX42x
Power and others
Power requirements 110 V – 240 V AC, 50/60 Hz
Screen size (measured Approx. 80.1 cm/32 inches Approx. Approx.
diagonally) 66.1 cm/ 54.8 cm/
26 inches 22 inches
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical) 1,366 dots (horizontal) × 768 lines (vertical)
Power consumption Indicated on the rear of the TV
Dimensions (Approx.) (w × h × d)
with Table-Top Stand (mm) 755 × 510 × 216
799 × 532 × 755 × 510 × 755 × 498 × 631 × 421 × 529 × 362 ×
230 216 225 182 172
without Table-Top Stand 799 × 502 × 755 × 480 × 755 × 482 × 631 × 406 × 529 × 347 ×
755 × 480 × 42
(mm) 70 42 42 42 42
Mass (Approx.)
with Table-Top Stand (kg) 10.4 10.2 11.4 10.2 9.9 7.2 5.1
without Table-Top Stand
7.9 7.7 8.7 7.7 7.7 6.1 4.1
(kg)
Supplied accessories See “Checking the accessories” (page 6).
Optional accessories Wall-Mount Bracket: SU-WL50B (for KDL-32EX723, KDL-32EX720, KDL- 32EX523,
KDL-32EX520, KDL-32CX523, KDL-32CX520)
SU-WL100 (for KDL-26/22EX423, KDL-26/22EX420)
USB Wireless LAN Adaptor
3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-32EX723, KDL-32EX720)
Operating temperature 0 ºC – 40 ºC
Operating humidity 10 % – 80 % RH (non-condensing)

*1 Except Australia model

*2 Australia model
Design and specifications are subject to change without notice.

24 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 25 Wednesday, December 15, 2010 1:22 PM

Installing the Accessories (Wall-Mount Bracket)

To Customers:
When using SU-WL50B and SU-WL100 Wall-Mount Bracket, the space between the wall and the TV
will be 6 cm. Use this space to route cables to the TV.
6cm

Wall

For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this
product.

Your TV can be installed using the SU-WL50B and SU-WL100 Wall-Mount Bracket (sold separately).

Additional Information
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
• Refer to “Detaching the Table-Top Stand from the TV” (page 7).

Sufficient expertise is required for installing this product, especially to determine the strength of the
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to
Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony
is not liable for any damage or injury caused by mishandling or improper installation.

(Continued) 25 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 26 Wednesday, December 15, 2010 1:22 PM

SU-WL50B and SU-WL100

When installing the base bracket on the wall (for SU-WL50B):
1 Install one side of each plate to the upper bracket and the other side to the lower bracket.
2 Attach the base bracket to the wall.
3 Remove the plates. (except KDL-55EX723, KDL-55EX720)
~
• Be sure to store the plates in a safe place after use.

a a
b b
c c
a b c c b a
c c
b b
a a

When installing the TV on a wall, remove the screws from the rear of the TV. The screws and number of screws are
available depending on the TV model (They are fastened in the screw holes for wall mounting.) Be sure to store the
removed screws in a safe place, keeping them away from children.
B For KDL-55EX72x B For KDL-46/40/32EX72x,
KDL-46/40/32EX52x,
KDL-32EX42x

× 4 × 2

× 2 × 2

Soft cloth Soft cloth

~
• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is
larger than the TV.
• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.

26 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 27 Wednesday, December 15, 2010 1:22 PM

KDL-55/46/40/32EX723, KDL-55/46/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520,

KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420
SU-WL50B

Screw
(+PSW
6 × 16)

Mounting
Hook

× 4

Soft cloth

KDL-26/22EX423 and KDL-26/22EX420

SU-WL100

Additional Information
Screw
(+PSW
4 × 12)

Mounting
Hook

Soft cloth

~
• Attach the Mounting Hook using four screws supplied with the Wall-Mount Bracket.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original
holes on the rear of the TV.

(Continued) 27 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 28 Wednesday, December 15, 2010 1:22 PM

Screw and Hook locations diagram/table

Model Name Screw location Hook location
KDL- SU-WL50B SU-WL50B
55EX72x e, j b
46EX72x/46EX52x e, j b
46CX52x d, i b
40EX72x/40EX52x e, j b
40CX52x d, i b
32EX72x/32EX52x e, h c
32EX420 e, h c
32CX52x e, h c
SU-WL100
26EX42x a
22EX42x b

SU-WL50B
Screw location Hook location
When installing the Mounting Hook on the When installing the TV onto the Base Bracket.
TV.
a
b
c

a b c c b a

Base Bracket
Mounting Hook

28 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 29 Wednesday, December 15, 2010 1:22 PM

SU-WL100
Hook location
When installing the TV onto the Base Bracket.

a
b

TV installation dimensions table

1 SU-WL50B

Additional Information
A E

B
D

Screen centre point

2 SU-WL100
A E F
125

B G
D H

Screen centre point

(Continued) 29 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 30 Wednesday, December 15, 2010 1:22 PM

Unit: mm
Screen Length for each mounting angle
Model Display dimensions centre
Angle (0°) Angle (20°)
Name dimension
KDL- C D E F G H
A B
SU-WL50B SU-WL50B SU-WL50B
55EX72x 1269 769 93 492 90
46EX72x 1078 660 148 492 92
46EX52x 1078 660 148 492 92
46CX52x 1122 682 137 485 135
40EX72x 943 586 185 492 91
40EX52x 943 586 185 492 91
40CX52x 991 606 175 485 132
32EX72x 755 480 189 444 92
32EX52x/
755 480 189 444 92
32EX420*1
32EX420*2 755 482 189 446 92
32CX52x 799 502 200 460 131
SU-WL100
26EX42x 631 406 78 295 95 204 374 263
22EX42x 529 347 108 295 93 182 319 276
*1 Except Australia model
*2 Australia model
Figures in the table may differ slightly depending on the installation.

WARNING
The wall that the TV will be installed should be capable of supporting a weight of at least four times that of the TV.
Refer to “Specifications” (page 23) for its weight.

30 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 31 Wednesday, December 15, 2010 1:22 PM

Ventilation AC power cord

Safety Information • Never cover the ventilation holes or insert
anything in the cabinet.
Handle the AC power cord and outlet as
follows in order to avoid any risk of fire,
• Leave space around the TV set as shown electrical shock or damage and/or injuries:
below.
Installation/Set-up • It is strongly recommended that you use a – Use only Sony supplied AC power cords,
Install and use the TV set in accordance with Sony wall-mount bracket in order to not those of other brands.
the instructions below in order to avoid any provide adequate air-circulation. – Insert the plug fully into the AC power
risk of fire, electrical shock or damage and/or outlet.
injuries.
Installed on the wall
– Operate the TV set on a 110–240 V AC
30 cm supply only.
Installation
– When wiring cables, be sure to unplug
• The TV set should be installed near an
10 cm 10 cm the AC power cord for your safety and
easily accessible AC power outlet.
take care not to catch your feet on the
• Place the TV set on a stable, level surface
to avoid it from falling down and cause cables.
personal injury or damage to the TV. – Disconnect the AC power cord from the
• Only qualified service personnel should AC power outlet before working on or
carry out wall installations. moving the TV set.
10 cm
• For safety reasons, it is strongly – Keep the AC power cord away from heat
recommended that you use Sony Leave at least this space around
sources.
accessories, including: the set.
– Unplug the AC power plug and clean it
– Wall-mount bracket regularly. If the plug is covered with dust
SU-WL100 (KDL-26/22EX42x)
Installed with stand
and it picks up moisture, its insulation
SU-WL50B (except 30 cm
may deteriorate, which could result in a
KDL-26/22EX42x) fire.
10 cm 10 cm 6 cm
• Be sure to use the screws supplied with the
Wall-mount bracket when attaching the Notes
mounting hooks to the TV set. The • Do not use the supplied AC power cord on
supplied screws are designed so that they any other equipment.
are 8 mm to 12 mm in length when • Do not pinch, bend, or twist the AC power
measured from the attaching surface of the Leave at least this space around
the set. cord excessively. The core conductors may
mounting hook. be exposed or broken.
The diameter and length of the screws
• To ensure proper ventilation and prevent • Do not modify the AC power cord.

Additional Information
differ depending on the Wall-mount
bracket model. the collection of dirt or dust: • Do not put anything heavy on the AC
Use of screws other than those supplied – Do not lay the TV set flat, install power cord.
may result in internal damage to the TV set upside down, backwards, or • Do not pull on the AC power cord itself
or cause it to fall, etc. sideways. when disconnecting the AC power cord.
– Do not place the TV set on a shelf, • Do not connect too many appliances to the
8 mm - 12 mm rug, bed or in a closet. same AC power outlet.
– Do not cover the TV set with a cloth, • Do not use a poor fitting AC power outlet.
such as curtains, or items such as
Screw (supplied with the newspapers, etc. Prohibited Usage
Wall-mount bracket) – Do not install the TV set as shown Do not install/use the TV set in locations,
Mounting Hook below. environments or situations such as those
Hook attachment on rear Air circulation is blocked. listed below, or the TV set may malfunction
of TV set and cause a fire, electrical shock, damage
and/or injuries.
Transporting Location:
• Before transporting the TV set, disconnect • Outdoors (in direct sunlight), at the
all cables.
seashore, on a ship or other vessel, inside a
• Two or more people are needed to vehicle, in medical institutions, unstable
Wall Wall
transport a large TV set. locations, near water, rain, moisture or
• When transporting the TV set by hand, smoke.
hold it as shown below. Do not put stress • If the TV is placed in the changing room
on the LCD panel and the frame around the of a public bath or hot spring, the TV may
screen. be damaged by airborne sulfur, etc.
KDL-26/22EX42x

• For best picture quality, do not expose the

screen to direct illumination or sunlight.
• Avoid moving the TV from a cold area to
KDL-55/46/40/32EX72x/ a warm area. Sudden room temperature
KDL-46/40/32EX52x/ changes may cause moisture
condensation. This may cause the TV to
KDL-46/40/32CX52x/
show poor picture and/or poor colour.
KDL-32EX420 Should this occur, allow moisture to
evaporate completely before powering the
TV on.

• When transporting the TV set, do not

subject it to jolts or excessive vibration.
• When transporting the TV set for repairs or
when moving, pack it using the original
carton and packing material.

(Continued) 31 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 32 Wednesday, December 15, 2010 1:22 PM

Environment: If the following problems

• Places that are hot, humid, or excessively occur...
dusty; where insects may enter; where it
might be exposed to mechanical vibration, Turn off the TV set and unplug the AC
near flammable objects (candles, etc). The power cord immediately if any of the
TV set shall not be exposed to dripping or following problems occur.
splashing and no objects filled with
liquids, such as vases, shall be placed on Ask your dealer or Sony service centre to
the TV. have it checked by qualified service
• Do not place the TV in a humid or dusty personnel.
space, or in a room with oily smoke or When:
steam (near cooking tables or
humidifiers). Fire, electric shock, or – AC power cord is damaged.
warping may result. – Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit
or having something thrown at it.
– Any liquid or solid object falls through
openings in the cabinet.
• Do not install the TV in places subject to
extreme temperature, such as in direct
sunlight, near a radiator or a heating vent.
The TV may overheat in such conditions
which can cause deformation of the
enclosure and/or TV malfunction.

Situation:
• Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from AC power
outlet and antenna during lightning
storms.
• Do not install the TV so that it sticks out
into an open space. Injury or damage from
a person or object bumping into the TV
may result.

Broken pieces:
• Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
• If the surface of the TV set cracks, do not
touch it until you have unplugged the AC
power cord. Otherwise electric shock may
result.

When not in use

• If you will not be using the TV set for
several days, the TV set should be
disconnected from the AC power for
environmental and safety reasons.
• As the TV set is not disconnected from the
AC power when the TV set is just turned
off, pull the plug from the AC power outlet
to disconnect the TV set completely.
• However, some TV sets may have features
that require the TV set to be left in standby
to work correctly.

For children
• Do not allow children to climb on the TV
set.
• Keep small accessories out of the reach of
children, so that they are not mistakenly
swallowed.

32 GB

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)
GB01COV.book Page 33 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 34 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 35 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 36 Wednesday, December 15, 2010 1:22 PM

Instructions about “Installing Wall Mount Bracket” are included

within this TV’s instructions manual.

Customer Support:

4-268-265-12(1)

© 2011 Sony Corporation Printed in Malaysia

KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-12(1)