QuickStart Guide

FortiGate Rugged 70F Series

FGR-70F and FGR-70F-3G4G
 Before you begin
Register your device to access FortiGuard updates, cloud management,
firmware upgrades, technical support, and warranty coverage.

https://support.fortinet.com

FortiExplorer App
Rapidly provision, deploy, and monitor Security Fabric components using a
mobile device.

Download FortiExplorer for your OS:

https://links.fortinet.com/fortiexplorer/downloads

This guide covers: FGR-70F, FGR-70F-3G4G

August 19, 2024

Copyright© 2023 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law
trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics
contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified
in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
2 3
 The Essentials Package Contents
Default Logins FortiGate Rugged 70F Series
FGR-70F, FGR-70F-3G4G

https://192.168.1.99
Username: admin
Password: leave blank

Fortinet Documents Library

1x FortiGate Rugged 70F device 1x QuickStart Guide
For a detailed Administration Guide, up-to-date Hardware documentation and
Reference Manuals, visit https://docs.fortinet.com/

Customer Service
For contracts, licensing, product registration and account management,
contact FortiCare Support at https://www.fortinet.com/support/contact 1x CAT5e Ethernet Cable 1x DIN Rail Bracket w/screws
(3x M3x10)

Technical Support
To access our Resource Center, Professional Services and Technical Support
Services, visit https://www.fortinet.com/support

1x Digital I/O Module 1x DC Power Connector

3x LTE/GPS Antennas
(3G4G model only)

4 5
 Setup
Unpack the box, power the device and choose one of the following options:

FortiExplorer App CLI

3
Enable Bluetooth on your mobile device for BLE or connect a mobile USB
cable into the device. 1 2 Speed (default): 9600
Data bits: 8
USB Console Cable Stop bits: 1
(available for purchase) Parity: None
Flow Control: None

Console Port
or
Management Computer

Download FortiExplorer Follow the on-screen Note: For a detailed CLI guide, visit docs.fortinet.com
for your OS instructions

GUI 3 FortiGate Cloud

1 https://19
2.168.1.9
Usernam 9
e: admin 1
No Passw
ord Internet
2
3
Port 1 2
Ethernet Cable
Management Computer WAN port

Ethernet Cable

Note: Configure the management computer with IP 192.168.1.x and Note: Browse to forticloud.com and follow the on-screen instructions
subnet 255.255.255.0

6 7
 Front - FGR-70F
4 Ports 1 to 4 (RJ45)
Green: Connected at 1000Mbps ACT SPEED
SPEED Amber: Connected at 100Mbps
3 4 5 Off: No link established or connected at 10Mbps
COM1/COM2 1/2 3/4 WAN1/WAN2 Green: Link established, no activity
1 2 ACT Flashing Green: Data activity
ACT SPEED
Off: No link established
STA ALM HA PWR

RJ45 Ports

5 WAN1 & WAN2 Ports (RJ45)

BLE
RST/

Green: Connected at 1000Mbps

SPEED Amber: Connected at 100Mbps
6 – BYP Off: No link established or connected at 10Mbps
Green: Link established, no activity
7 FortiGate Rugged 70F ACT Flashing Green: Data activity
12-125V SFP1
BLE 8 SFP2 Off: No link established

6 Bypass Status 7 Earth Ground optional connection

Green: PHY mode
11
DC1

DC1+

DC1–
DC2+

DC2 –

DC2
IN1
IN2

N1+
REF
N2+

COM
NO

OUT
NC

Red: Bypass mode

9 10
8 BLE
Blue: BLE connected
Flashing Blue: BLE active
1 STA 2 USB (USB 2.0) Server port Off: BLE off
Green: Operating normally
Flashing Green: Device resetting
Red: Device error
9 Power Terminals (DC1 & DC2) Redundant failover, 12V to 125V DC, 2A Max
(Note: Alarm disabled by default in the OS. Wire range is 30 - 16 AWG)

ALM 3 COM1 (RJ45) Console Green: Power detected

Red: Major alarm detected (Top Port) Red: Alarm is on; no power detected
Amber: Minor alarm detected Off: No power detected
Off: No alarm detected COM2 (RJ45) Serial Data

HA
(Bottom Port) 10 Digital I/O Connector software-defined alarms. See page 17 for details.

Green: HA enabled (normal) Input (IN1 & IN2) Output(OUT)

Red: HA enabled (failover) Green: Alarm defined, not detected Green: Alarm defined, not detected
Off: HA disabled Red: Alarm detected Flashing Red: Major output alarm
PWR Off: Alarm not defined Red: Minor output alarm
Off: Alarm not defined
Green: Power detected
Off: Power not detected SFP1 & SFP2 (SFP)
11
Green: Connected at 1000Mbps
BLE/RST Activates BLE management or restores to factory default
Flashing Green: Data activity
Off: No link established
8 9
 Front - FGR-70F-3G4G
1 1 6 WAN1 & WAN2 Ports (RJ45)
GPS
1 ACT SPEED
Green: Connected at 1000Mbps
MAIN 4 5 6 DIV
SPEED Amber: Connected at 100Mbps
COM1/COM2 1/2 3/4 WAN1/WAN2 Off: No link established or connected at 10Mbps
2 3 Green: Link established, no activity
ACT SPEED
ACT Flashing Green: Data activity
STA ALM HA PWR

Off: No link established RJ45 Ports

BLE
RST/

7 3G4G & Bypass Status

3G/4G SIM 1 & 2

7 – 3G/4G 1– SIM –2 – BYP GPS –
Green: 4G service on Green: SIM active
Amber: 3G service on Off: SIM not active
8 FortiGate Rugged 70F-3G4G Off: 3G/4G service off
12-125V
BLE 11 GPS
SFP1 SFP2
BYP Green: GPS enabled
Green: PHY mode Off: GPS disabled
Red: Bypass mode
12
DC1

DC1+

DC1–
DC2+

DC2 –

DC2
IN1
IN2

N1+
REF
N2+

COM
NO

OUT
NC

9 10 8 Earth Ground optional connection

9 Power Terminals (DC1 & DC2) Redundant failover, 12V to 125V DC, 2A Max
1 Antenna Connection (3x SMA) WWAN and GPS antenna connections
(Note: Alarm disabled by default in the OS. Wire range is 30 - 16 AWG)

Green: Power detected

2 STA 3 USB (USB 2.0) Server port Red: Alarm is on; no power detected
Green: Operating normally Off: No power detected
Flashing Green: Device resetting 4 COM1 (RJ45) Console
Red: Device error
(Top Port) 10 Digital I/O Connector software-defined alarms. See page 17 for pinout.
ALM
Input (IN1 & IN2) Output(OUT)
Red: Major alarm detected COM2 (RJ45) Serial Data
Amber: Minor alarm detected (Bottom Port) Green: Alarm defined, not detected Green: Alarm defined, not detected
Off: No alarm detected Red: Alarm detected Flashing Red: Major output alarm
5
Ports 1 to 4 (RJ45)
Off: Alarm not defined Red: Minor output alarm
HA Green: Connected at 1000Mbps Off: Alarm not defined
Green: HA enabled (normal) SPEED Amber: Connected at 100Mbps
Red: HA enabled (failover) Off: No link established or 11 BLE 12 SFP1 & SFP2 (SFP)
Off: HA disabled connected at 10Mbps Blue: BLE connected Green: Connected at 1000Mbps
PWR Green: Link established, no activity Flashing Blue: BLE active Flashing Green: Data activity
Green: Power detected ACT Flashing Green: Data activity Off: BLE off Off: No link established
Off: Power not detected Off: No link established

BLE/RST Activates BLE management or restores to factory default

10 11
 MICRO SD Slot - FGR-70F Series Nano SIM Slots - FGR-70F-3G4G

WARNING: Industrial SD cards recommended for extreme NOTE: Industrial SIM cards recommended for extreme
temperature environments. Power off device to install/uninstall temperature environments. SIM1 is primary, SIM2 is secondary;
an SD card as the FGR-70F Series does not support hot-swapping. SIM type is 4FF - Nano SIM. Refer to the Admin Guide for cellular
wireless configuration at https://docs.fortinet.com

1 2 3 1 2 3
3 2 1
2 3
31 2
2 11 3 2 1
1 MIS 2 3 2 31 2 1
MIS 2 1 MIS 2 1 MIS 2
1 MIS 2 1 MIS 2

12 13
 Dimensions

The FGR-70F and FGR-70F-3G4G share the same chassis dimensions. The FGR-70F and FGR-70F-3G4G share the same DIN bracket.

Height Edge Thickness,

Length 80.5mm (3.17in) both sides,
122.0mm (4.80in) 8.8mm (0.35in)

Length
76.6mm (3.02in)

Width
110.0mm
(4.33in)

Height
48.3mm
(1.90in)

Length w/ connector
140.5mm (5.53in)

For the FGR-70F-3G4G, the antenna dimensions are shown below.

NOTE: The DIN plate thickeness is 2.4mm (0.09in).

Length
205mm (8.07in)
Width
25mm (.98in)

14 15
 DIN Installation Power Installation

The FGR-70F Series mounts on the side or rear of the device using the Warnings
provided screws and DIN bracket (images only show 3 mounting holes). • The dual redundant DC input supports negative ground
(+12V to +125V DC) and positive ground (-12V to -125V DC)
• DC1+ and DC2+ are the high voltage potential pins and DC1-
and DC2- are the lower voltage potential pins
• Do not connect DC+ terminal to a lower voltage potential
than DC- terminal
• The voltage between a DC+ and DC- must be +12V to +125V DC
• Consult a professional electrician to install the device and
determine a suitable wire gauge and length
• The DC terminal block wire gauge maximum is 12 AWG; the
minimum is 30 AWG
• Optional but recommended, connect earth ground using the
Rear Mounting Holes Side Mounting Holes lug plate or grounding screw

1 Secure the bracket

1. Connect DC1+ or DC2+ on the device terminal block to the DC

power source, then connect the negative DC1- or DC2- on the
terminal block

DC1+ DC1- DC2+ DC2-

DIN Bracket Installed

DIN Bracket
2 Mount the device to the rail

DC Input Power DC+ Terminal DC- Terminal

Rail Mounted Negative Ground +12V to +125V DC Ground

Positive Ground Ground -12V to -125V DC

16 17
 M HA PWR
BLE
RST/
Digital I/OSIMConnector
GPS
2. Optional - Secure the earth ground terminal of the device to chassis
MAIN
ground or earth ground COM1/COM2 3/4
DIV – 3G/4G 1– –2 – BYP GPS –
1/2 WAN1/WAN2

Refer to the Admin Guide for configuration settings.

STA ALM HA PWR

FortiGate Rugged 70F-3G4G

BLE
RST/
GPS BLE
12-125V SFP1 SFP2
– 3G/4G 1– SIM –2 – BYP GPS –

MAIN DIV
COM1/COM2
FortiGate Rugged 70F-3G4G
BLE 1/2 3/4 WAN1/WAN2
12-125V SFP1 SFP2

DC1

DC1+

DC1–
DC2+

DC2 –

DC2
IN1
IN2

N1+
REF
N2+

COM
NO

OUT
NC
STA
DC1

DC1+

DC1–
DC2+

DC2 –

DC2
IN1
IN2

N1+
REF
N2+

COM
NO

OUT
NC
ALM HA PWR
BLE
RST/

GND Connector Description

IN1+ Alarm Input 1

– 3G/4G 1– SIM –2 – BYP GPS – REF Alarm Input 1/2 Reference Ground
3. Insert the wired power connector into the terminal block on the device IN2+ Alarm Input 2

FortiGate Rugged 70F-3G4G

NC Normally Closed terminal
BLE COM Common terminal
12-125V SFP1 SFP2
NO Normally Open terminal
DC1

DC1+

DC1–
DC2+

DC2 –

DC2
IN1
IN2

N1+
REF
N2+

COM
NO

OUT
NC

BIOS Options
The FortiGate Rugged 70F provides an option in the BIOS menu to set the
CPU speed from high performance mode (default) to low power mode.
DC1+ DC1- DC2+ DC2-

1. When prompted during bootup, press any key to enter the BIOS
2. Type I for system information
3. Type F to set the CPU frequency, then follow the onscreen instructions
4. Press Q twice to exit and continue the bootup process
DC1+ DC2-
DC1- DC2+

OPTIONAL: The FGR-70F Series has optional dual DC inputs for failover NOTE: See the admin guide at https://docs.fortinet.com for more
redundancy. If a DC input fails, the second input will supply power. information.

18 19
 Cautions and Warnings For FGR-70F-3G4G:
WCDMA B1 less than 24dBm
Environmental specifications WCDMA B8 less than 24dBm
LTE B1 less than 24dBm
Ambient operating temperature: -40°C to 75°C LTE B3 less than 24dBm
LTE B7 less than 23dBm
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) LTE B8 less than 24dBm
LTE B20 less than 24dBm
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l’altitude). LTE B28 less than 24dBm
LTE B42 less than 23dBm
Safety LTE B43 less than 23dBm

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Warning: Equipment intended for installation in Restricted Access Location.
Avertissement: Le matériel est conçu pour être installé dans un endroit où l’accès est restreint.
Simplified EU Declaration of Conformity
A skilled person must install the equipment. This declaration is only valid for Fortinet products (including combinations of software, firmware and hardware) provided by Fortinet or Fortinet’s authorized partners to the end-customer
L’équipement doit être installé par une personne qualifiée. directly for use within the EU or countries that have implemented the EU Directives and/or spectrum regulation. Any Fortinet products not obtained directly from Fortinet or Fortinet’s autho-
rized partners may not comply with EU Directives and Fortinet makes no assurances for such products.
Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an
electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate Български
terminal for earthing. Този продукт е в съответствие с Директива 2014/53/ЕС.

Mise à la terre — Pour éviter d’endommager votre matériel, assurez-vous que les branchements qui entrent à partir de l’extérieur du bâtiment passent par un parafoudre / parasurtenseur Česky
et sont correctement mis à la terre. Utilisez un poste de travail de décharge électrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce produit possède une Tento produkt je v souladu se směrnicí 2014/53/EU.
borne de mise à la terre qui est prévu à l’arrière du produit, à ceci s’ajoute la mise à la terre de la prise.
Dansk
This product has a separate protective earthing terminal provided on the back of the product in addition to the grounding terminal of the attachment plug. This separate protective earthing Dette produkt er i overensstemmelse med direktiv 2014/53/EU.
terminal must be permanently connected to earth with a green with yellow stripe conductor minimum size # 14 AWG and the connection is to be installed by a qualified service personnel.
Ce produit a une borne de mise à la terre séparé sur le dos de l’appareil, en plus de la borne de mise à la terre de la fiche de raccordement. Cette borne de mise à la terre séparée doit être Deutsch
connecté en permanence à la terre avec un conducteur vert avec la taille bande jaune de minimum # 14 AWG et la connexion doit être installé par un personnel qualifié. Dieses Produkt entspricht der Richtlinie 2014/53/EU.

Eesti
Regulatory Notices See toode vastab direktiivile 2014/53/EL.

English
Federal Communication Commission (FCC) – USA This product is in compliance with Directive 2014/53/EU.

Español
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
Este producto cumple con la Directiva 2014/53/UE.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired operation.
Ελληνική
Το προϊόν αυτό συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is
Français
not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
Ce produit est conforme à la Directive 2014/53/UE.
cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Hrvatski
WARNING: Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Ovaj proizvod je u skladu s Direktivom 2014/53/EU.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
Italiano
between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Questo prodotto è conforme alla Direttiva 2014/53/EU.

Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada Latviski
Šis produkts atbilst Direktīvai 2014/53/ES.
CAN ICES-003 (A) / NMB-003 (A)
Lietuvių
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regula¬tions of the Canadian Department of Šis gaminys atitinka direktyvą 2014/53/ES.
Communications.
Malti
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE.
brouillage radioélectrique édicte par le ministère des Communications du Canada.
Magyar
Innovation, Science and Economic Development (ISED) – Canada Ez a termék megfelel a 2014/53/EU irányelvnek.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the Nederlands
following two conditions: Dit product is in overeenstemming met Richtlijn 2014/53/EU.
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device. Norsk
Dette produktet er i samsvar med direktiv 2014/53/EU.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: Polski
1 .L’appareil ne doit pas produire de brouillage; Ten produkt jest zgodny z dyrektywą 2014/53/UE.
2 .L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Português
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm Este produto está em conformidade com a Diretiva 2014/53/UE.
between the radiator & your body.
Rumunski
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de Acest produs este în conformitate cu Directiva 2014/53/UE.
20cm de distance entre la source de rayonnement et votre corps.
Slovensky
This radio transmitter (IC: 7280B-2401T25) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance Tento produkt je v súlade so smernicou 2014/53/EÚ.
for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Slovensko
Le présent émetteur radio (IC: 7280B-2401T25) a été approuvé par ISED pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et Ta izdelek je v skladu z Direktivo 2014/53/EU.
l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l’exploitation de l’émetteur. Suomi
Tämä tuote on direktiivin 2014/53/EU mukainen.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.
Svenska
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. Denna produkt överensstämmer med direktiv 2014/53/EU.

Antenna
Note: The full Declaration of Conformity for this product is available in the link below:
Connector Gain (dBi) Network https://site.fortinet.com/ProductRegulatory/EU
type

Monopole I-PEX 1.53 Bluetooth

European Conformity (CE) - EU

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

UK Conformity Assessed (UKCA) – United Kingdom

The product transmits within the frequency ranges and less than or equal to the power listed below:
The product transmits within the frequency ranges and less than or equal to the power listed below:
Standard Frequency Range Max. Transmit Power
Standard Frequency Range Max. Transmit Power
Bluetooth 2402–2480 MHz 10 dBm (EIRP)
Bluetooth 2402–2480 MHz 10 dBm (EIRP)

20 21
 For FGR-70F-3G4G:
WCDMA B1 less than 24dBm
WCDMA B8 less than 24dBm
LTE B1 less than 24dBm
LTE B3 less than 24dBm
LTE B7 less than 23dBm
LTE B8 less than 24dBm
LTE B20 less than 24dBm
LTE B28 less than 24dBm
LTE B42 less than 23dBm
LTE B43 less than 23dBm

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This product is in compliance with Statutory Instrument 1206 Radio Equipment Regulations 2017

The full Declaration of Conformity for this product is available in the link below:
https://site.fortinet.com/ProductRegulatory/UK

Voluntary Control Council for Interference (VCCI) – Japan

この装置は、クラスＡ機器です。この装置を住宅環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあり
ます。
ＶＣＣＩ－Ａ
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan

The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below:
限用物質含有情況表 (RoHS Table) 請到以下 網址下載：
https://www.fortinet.com/bsmi

警告： 為避免電磁干擾，本產品不應安裝或使用於住宅環境。

請仔細閱讀以下說明
本設備勿置於潮濕處。
連接至電源前，請先檢查電壓。
當設備不用時，請將所有電源線拔除，避免電壓不穩而造成傷害。
勿將任何液體濺入設備中，避免線路短路。
基於安全理由，只有受到專業訓練的從業人員，才可以打開本設備。
請勿自行調整或修理已通電的設備，以確保您的安全。
如不小心受傷，請立刻找急救人員給予您適當的救護，千萬別因傷勢輕微而忽略自己的傷勢。

雷射設備非用戶維修設備，請與生產商聯繫維修事宜。

注意: 要斷開電源，請將所有電源線從本機上拔下

英屬蓋曼群島商防特網股份有限公司台灣分公司
地址：台北市內湖區行愛路176號2樓
電話：(02) 27961666

National Telecommunications Commission (NCC) – Taiwan

NCC警語
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使 用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通
信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
減少電磁波影響，請妥適使用
電磁波曝露量MPE標準值0.9 mW/cm²，送測產品實測值為：0.08069 mW/ cm²，建議使用時至少距離人體 20 cm.

China

此为A级产品，在生活环境中，该产品可能会造成无线电干扰。这种情况下，可能需要用户对其采取切实可行的措施。

22 23
Fortinet.com