Scribd
Upload
6 views4 pages

Carriers PG 08 10

The document provides detailed specifications for various Off-the-Floor Water Closet Systems (Z1201-NR4, Z1203-NL4, Z1204-1N, Z1214, Z1222, Z1231-SL) manufactured by Zurn Industries. Each system features durable construction, load-bearing capabilities, and adjustable installations to accommodate different requirements. The document includes installation details and dimensions necessary for proper setup in various environments.

Uploaded by

c5vs8fxphq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views4 pages

Carriers PG 08 10

The document provides detailed specifications for various Off-the-Floor Water Closet Systems (Z1201-NR4, Z1203-NL4, Z1204-1N, Z1214, Z1222, Z1231-SL) manufactured by Zurn Industries. Each system features durable construction, load-bearing capabilities, and adjustable installations to accommodate different requirements. The document includes installation details and dimensions necessary for proper setup in various environments.

Uploaded by

c5vs8fxphq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CARRIER SYSTEMS

GENERAL PRODUCT ILLUSTRATIONS

OFF-THE-FLOOR WATER CLOSET SYSTEM


Z1201-NR4

Z1201-NR4

FACEPLATE
GASKET
FACEPLATE

FIXTURE
SUPPORT BOLT
ANCHOR FOOT
FIBER WASHER REQUIRED FOR ALL
ZZ O-RING
INSTALLATION
ALUMINUM SEAL
CAP NUT
CAST IRON
UNIVERSAL
FEET

1/2 [13] BOLTS

O-RING
SEAL
FEET BOLTED TO
FLOOR W/MIN
ADJUSTABLE 6" [152] 1/2 [13] BOLT
ABS COUPLING (FURNISHED BY OTHERS)
NEO SEAL GASKET
WITH INTEGRAL TEST CAP

Z1201 Off-The-Floor Water Closet System Offers:


1.  All Dura-Coated cast iron construction with 500 lb. load bearing capability to A.N.S.I. standards.
2. Vertical adjustment of 4-1/2" [114mm] - 9" [229mm] for Siphon-Jet closet installation. System accommodates for both
paraplegic and standard rough-in requirements.
3.  13 5/8" [356mm] required from finished wall to back of system (Z1201-NL4, NR4).
4.  Non-corrosive ABS adjustable coupling with integral test cap and unique ‘ZZ’ Zurn adjusting thread.

ZURN INDUSTRIES, LLC SPECIFICATION DRAINAGE OPERATION, 1801 PITTSBURGH AVENUE, ERIE, PA 16502 PHONE 814/455-0921 FAX: 814/454-7929 www.zurn.com

Page 17
CARRIER SYSTEMS

GENERAL PRODUCT ILLUSTRATIONS

OFF-THE-FLOOR WATER CLOSET SYSTEM


Z1203-NL4

Z1203 Off-the-Floor Water Closet System Offers:


1.  All Dura-Coated cast iron construction with 300 lb. load bearing capability to A.N.S.I. standards.
2. Vertical adjustment of 4-1/2" [114mm] to 9" [229mm]for Siphon-Jet closet installation. System accommodates for both
paraplegic and standard rough-in requirements.
3.  14" [356mm] required from finished wall to back of system (Z1203 NL4, NR4).
4.  Non-corrosive ABS adjustable coupling with integral test cap and unique ‘ZZ’ Zurn adjusting thread.

ZURN INDUSTRIES, LLC SPECIFICATION DRAINAGE OPERATION, 1801 PITTSBURGH AVENUE, ERIE, PA 16502 PHONE 814/455-0921 FAX: 814/454-7929 www.zurn.com

Page 18
CARRIER SYSTEMS

GENERAL PRODUCT ILLUSTRATIONS

Z1204-1N
Installed in No-Hub waste systems, the Zurn Rigid
System offers minimal deflec­tion at three hundred
can­ti­le­vered pounds. Through three tie down bolts,
the system is rigidly secured and sup­ports the fixture
independent of the finished wall.

Floor Anchoring Bolts Furnished by Others

Z1214
Installed in No-Hub waste systems, for use with
floor mounted back outlet water closets. The Z1214
system offers adjustable coupling, optional vent and
back auxiliary inlet.

ZURN INDUSTRIES, LLC SPECIFICATION DRAINAGE OPERATION, 1801 PITTSBURGH AVENUE, ERIE, PA 16502 PHONE: 855-ONE-ZURN (855-663-9876) FAX: 814-454-7929 www.zurn.com

Page 19
CARRIER SYSTEMS

GENERAL PRODUCT ILLUSTRATIONS

Z1222
Installed in 2 x 4 stud wall, offers fixture support independent
of wall. The system is lagged to the floor as shown. Standard
hardware furnished for wall thickness (front of plate to finished
wall) up to 4-3/4” and mini­mum space re­quire­ments for system
are 3-3/8”.

Z1231-SL
Installed behind a block wall. The fixture is installed
over cast iron arms and leveled by use of four leveling
screws. Securing the fixture is ac­com­plished by turning
down the locking devices. Larger sleeves can be used
to accommodate thicker wall materials.

ZURN INDUSTRIES, LLC SPECIFICATION DRAINAGE OPERATION, 1801 PITTSBURGH AVENUE, ERIE, PA 16502 PHONE: 855-ONE-ZURN (855-663-9876) FAX: 814-454-7929 www.zurn.com

Page 20

You might also like