GENERAL INFORMATION GUIDE

LIGHTWARE 34, Release 1.0

NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks Corporation (MITEL). The information is subject to change without notice and should not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes. No part of this document can be reproduced or transmitted in any form or by any means electronic or mechanical - for any purpose without written permission from Mitel Networks Corporation. Mitel, SX-2000, SX-200, MiTAI, MiLINK, HOST COMMAND INTERFACE (HCI), TALK TO, ANSWER PLUS, Speak@Ease, LIGHTWARE, NuPoint Messenger, XpressOffice, SUPERSET, SUPERCONSOLE 1000 and SUPERCONSOLE 2000 are trademarks of Mitel Networks Corporation. Windows and Microsoft are trademarks of Microsoft Corporation. INTEL and Pentium are trademarks of Intel Corporation. Java is a trademark of Sun Microsystems Incorporated. Netscape and Netscape Navigator are trademarks of Netscape Communications Corporation. Other product names mentioned in this document may be trademarks of their respective companies and are hereby acknowledged.

SX-2000 General Information Guide LIGHTWARE 34, Release 1.0 July 2005

Table of Contents

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 System Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Call Progression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Lines and Trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Supporting Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Application Services Unit (ApSU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SX-2000 LIGHT CTI Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 R2 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Enterprise Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 OPS Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 7100 Management Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 SX-2000 Alarm Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Mitel 6100 Contact Center Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NuPoint Messenger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Emergency Response Adviser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Control Cabinets - Redundant SX-2000 LIGHT System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Peripheral Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SUPERSET HUB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 System Fail Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Peripheral Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Line Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Trunk Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Migration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Migration of SX-2000 to 3300 ICP (3300 ICP takes control) . . . . . . . . . . . . . . . . . . . . . . . . 28 Migration of SX-2000 to 3300 ICP (SX-2000 retains control) . . . . . . . . . . . . . . . . . . . . . . . . 29 Digital Service Unit (DSU) Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Network Services Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Universal Network Services Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 R2 Network Services Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 BRI Network Services Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 SUPERSET 4000 Series Telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 SUPERSET 4001 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 SUPERSET 4015 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 SUPERSET 4025 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 SUPERSET 4125 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 SUPERSET 4150 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 SUPERSET 400 Series Telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SUPERSET 410 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SUPERSET Interface Module 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Programmable Key Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Programmable Key Module 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SX-2000 General Information Guide

Programmable Key Module 48 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Digital Line Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Single-line Digital Line Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Attendant Consoles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 SUPERCONSOLE 1000 Attendant Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 SUPERCONSOLE 2000 Attendant Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Console DSS/BLF Interface Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Datasets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DATASET 2103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 DATASET 2203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 DNIC Music On Hold/Pager Unit (DMP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Toll Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Authorized Maintenance Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Enhanced Login Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Mitel Options Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Printer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Circuit Card Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Network Services Unit (NSU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 SUPERCONSOLE 2000 Reserve Power Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Traffic and Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Attendant Console Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Tone Plan Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Capacity Levels, Software Configurations, and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 88 MITEL Feature Resource Dimensions (MFRDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Hardware Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Table of Contents

Feature Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Other Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Supported MFRDs (no longer sold) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 MSDN/DPNSS Network Resource Dimensions (MNRDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 MITEL Traffic Capacity Levels (MTCLs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Application Capacity Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MHCL: MITEL HCI Capacity Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MTSP: MITEL TAPI Service Provider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MACL: MITEL ACD Agent Capacity Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 MAIACL: MITEL Agent ID Appearance Capacity Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 MLCL: MITEL Maximum Line Appearances Capacity Level . . . . . . . . . . . . . . . . . . . . . . . 100 MITEL Software Applications (Optional Features) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 MITEL Software Bundles (MSBs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 MITEL Core Packages (MCPs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

SX-2000 General Information Guide

Product Overview

Product Overview
The Mitel SX-2000 LIGHT system is an advanced, fiber-distributed telephone system that is designed for larger organizations or for networked telecommunications environments. The distributed architecture separates the control node from peripheral, application, and network access nodes and links them by multimode fiber optic cable. The system can be configured to meet the communication needs and physical layout of virtually any enterprise -- whether a single office, a campus, or multiple sites spread across a wider geographic area. The Mitel SX-2000 LIGHT system supports up to 3000 telephones in a single system configuration. However, if the number of users exceeds the 3000-user capacity of a single system, a virtually unlimited number of systems can be "clustered" to provide a seamless network by using digital trunking and SX-2000 private network applications. To provide high reliability, the SX-2000 LIGHT is configured as a multi-cabinet, control redundant system. The redundant main control cabinet provides full back-up, including independent power supplies, so that system operation will not be affected if a main control component fails. When the system switches to the alternate main control, calls in progress are not dropped and callers are unaware of the system event. The redundant main control cabinet can support up to eleven expanded peripheral nodes, page 21, located up to 8.7 miles (14 kilometers) away. The redundant main control cabinet also supports up to five DSU cabinets (see page 30) or Network Services Units (see page 31).

System Architecture
The SX-2000 LIGHT system has two levels of control: main control and peripheral control; the functions are handled by the main controller and peripheral switch controller cards, respectively. The main control communicates with the peripheral switch and DSUs by using the serial-communication message links and circuit switch links. The main control sets up all calls and establishes the paths through the circuit switch. The main control includes the following functional subsystems: Message System: The message system links the main control to the intelligent subsystems and handles all protocol control (including handshake, message processing, error check, reformat, redirection, queueing, and maintenance functions). The messages include off-hook, digits, and other signaling information collected by the peripheral switch controller. Circuit Switch: Based on messages received from the main control, the switching matrix establishes paths between parties or between digital processing equipment. The system circuit links are a shared resource and are allocated to calls as required. The digital signals are typically PCM voice and various control traffic signals. Mass Storage Subsystem: By using the hard disk module, the mass storage subsystem provides long-term non-volatile bulk memory storage of system information (including system software, database backup, and logs). Operating system, database upgrades, and an additional level of backup are provided through a removeable storage device drive.

The peripheral control substantially reduces the computing load on the main controller by performing all the simple but real-time-intensive tasks that are associated with scanning and

SX-2000 General Information Guide

controlling a large number of different Peripheral Interface cards. Following instructions from the main controller, it sets up connections between the Peripheral Interface cards and the circuit switch subsystem.

Basic System Architecture

Call Progression
Each telephone connects to the system through an interface circuit on a Peripheral Interface card. During a simple call, the call progresses as follows: When a telephone goes off-hook, the main controller connects the telephones receive path to a circuit carrying dial tone and the transmit path to a DTMF receiver circuit. As the user dials numbers (DTMF tones) on the telephone keypad, the DTMF receiver translates the tones into digits and passes them over message links to main control. The main control collects the digits and identifies the destination; then, it rings the destination by sending a control signal over a message link. The peripheral switch controller sends a message to main control when the destination set answers the call. The main control establishes a circuit switch voice path by connecting the source to the destination.

Product Overview

The systems tone generator supplies all audible tones (such as dial tone, busy tone, and ringback tone) to the circuit switch for distribution to callers as required. At the Peripheral Interface card, voice signals from each telephone are converted into digital form (pulse code modulation) and routed through the system on the established circuit; signals leaving the switch are decoded back into analog form by the Peripheral Interface card.

Lines and Trunks

Lines
The system supports the following types of internal voice lines: Digital Network Interface (DNI) Lines provide an interface for Mitel digital telephones, consoles, and datasets. The maximum loop resistance on a DNI line must be 280 ohms or less, and the loop length must be 3300 ft. (1000 m) or less on 26-gauge wire. These lines are supported by the Digital Network Interface line card. On-Premise (ONS) Lines (24 V per port) are for industry-standard rotary dial and DTMF telephones. The external loop resistance on an ONS line must be 600 ohms or less, and the loop length must be 5000 ft. (1500 m) or less on 26-gauge wire. These lines are supported by the ONS line card and the ONS CLASS/CLIP line card. Off-Premise (OPS) Lines (48 V per port) are for industry-standard telephones where the external loop resistance exceeds 600 ohms or where lightning surge protection is required. The maximum loop resistance on an OPS line must be 1800 ohms or less, and the loop length must be 19,000 ft. (5800 m) or less on 26-gauge wire. These lines are supported by the OPS line card. Control Over Voice (COV) Lines provide an interface for voice mail systems. The maximum loop resistance on a COV line must be 280 ohms or less, and the loop length must be 3300 ft. (1000 meters) or less on 26-gauge wire.

Trunks
The system can connect to the public switched network or to private networks over both digital and analog trunks. The following digital links are supported: DS1 Links: The system supports CO, DID, E&M, MSDN/DPNSS, and MSAN/APNSS protocols. The SX-2000 LIGHT system connects to DS1 links by using a DS1 Formatter or DS1/T1 Formatter II card. CEPT Links: The system supports MSDN/DPNSS, DASS II (UK only), and Italian CAS (Italy only) protocols.

SX-2000 General Information Guide

The SX-2000 LIGHT system connects to CEPT links by using a CEPT Formatter or CEPT Formatter II card. BRI Links: The system supports Euro-ISDN 2B+D, Basic Rate, or North American National ISDN-1 and ISDN-2 protocols. The SX-2000 LIGHT system connects to BRI links by using either a BRI card or BRI NSU, page 34. The BRI link can be either User or Network Termination (for European installations only).

PRI Links: The system supports DMS-100, DMS-250, Bellcore National ISDN, 4ESS, NI-2, 5ESS NI-2, QSIG and Euro-ISDN (CTR4) protocols. The SX-2000 LIGHT system connects to PRI links by using a PRI card or Universal NSU, page 31.

R2 Links: The system supports the CCITT Blue Book, Volume VI, Fascicle VI.4, Specifications of Signaling System R2, Recommendations Q.440 to Q.490 (with the exception of Echo Suppression (Q.479), Test Calls (Q.490) and international signals). The SX-2000 LIGHT system connects to the R2 links by using either an R2 card or R2 NSU, page 33.

The following analog trunks are supported: Analog CO Trunks interface to the system through the Loop Start/Ground Start (LS/GS) trunk card. E&M Trunks interface to the system through the E&M trunk card (which can be configured for either 2-wire or 4-wire operation). This card supports Type I through Type V circuits. Direct Inward Dial and Tie Trunks interface to the system through the DID/Loop Tie trunk card, AC15 trunk card, DID/2 trunk card, or DID/3 trunk card (depending on local requirements).

10

Supporting Applications

Supporting Applications
Application Services Unit (ApSU)
The Application Services Unit (ApSU) Release 2.0 is a fiber connected MiTAI server for the SX-2000 that replaces the Application Fiber Card (AFC). It is a low cost and maintenance-free unit that supports: MiTAI remote clients Version 10 or later, Mitel Client/Server TSP 3.0 or later.

ApSU Front Panel Note: ApSU Release 2.0 supports a maximum of 222 client connections. Once this maximum limit has been reached, any additional clients attempting to connect to the MiTAI server will receive the error message SXERR_SERVICE_FULL.

SX-2000 LIGHT CTI Connectivity

The Application Services Unit provides a MiTAI server that will be able to service multiple MiTAI and TAPI clients over the network using standard network cards. The ApSU reduces the overall cost of hardware and simplifies the deployment and maintenance of telephony applications.

SX-2000 CTI connectivity using the Application Services Unit

11

SX-2000 General Information Guide

R2 Support
The R2 card and R2 NSU, page 33, are protocol converters that allow the SX-2000 system to access an R2 National Public Switched Telephone Network (PSTN) with MF-R2 digital trunk signaling. The protocol converter accepts incoming MF-R2 signals from the PSTN and turns them into signals for the SX-2000 system. Similarly, the converter turns outgoing signals from the SX-2000 into MF-R2 signals for the PSTN. The R2 protocol converter supports the CCITT Blue Book, Volume VI, Fascicle VI.4, Specifications of Signaling System R2, Recommendations Q.440 to Q.490 (with the exception of Echo Suppression (Q.479), Test Calls (Q.490) and international signals). Although many countries use R2 signaling, most do not adhere to the CCITT recommendations in their entirety, and there are many protocol variations around the world. R2 support on the SX-2000 system provides exceptional flexibility, which enables you to support the regional variations in the R2 protocol. Line signaling, tone interpretation, and timing parameters for the converter can be adapted to suit any national or regional requirement. For example: Line signaling features allow you to program up to four bits to define the incoming and outgoing patterns for line signals such as Idle and Answer. Register signaling features allow you to program the type of address signaling termination (signaled or timed) and whether signaling should be fully-compelled or semi-compelled. These features also allow you to define each register signaling tone individually.

Enterprise Manager
Enterprise Manager provides consolidated administration of Mitels product portfolio. It provides a management desktop, inventory management, configuration and provisioning, Health monitoring, maintenance and diagnostics and system administration. In addition to onboard device management, a complete management solution for our product portfolio must include an effective way for IT/Telecoms support personnel to manage multiple converged IP gateways and enterprise business applications. These solutions may be organized into a network or may exist as stand-alone devices. Mitel is evolving its existing Enterprise focused network management tool suite, OPS Manager. OPS manager is tightly integrated with Enterprise Manager. Both Enterprise Manager and OPS Manager are now compatible with Windows 2003 and Windows XP SP2. For more information on OPS Manager, refer to page 14. Enterprise Manager includes a number of applications that provide the following: Network Inventory and Health Monitoring via basic Enterprise Manager Support for Management Access Point. Integrated and synchronized with OPS Manager. OPS Manager can be launched separately from the Enterprise Manager client.

12

Supporting Applications

The standalone Mitel Alarm Monitor allows you to monitor alarms on networks that are managed by Enterprise Manager, without having to start the Enterprise Manager client. Export capability that allows you to export alarm, event, and inventory data in .csv format to the Enterprise Manager server. Alarm history which includes the ability to archive alarms on the server. Adminstrator defined user groups. Autodiscovery of SX-2000, 3300 ICP, NuPoint Messenger IP, Teleworker IP Phones, Wireless Access Points and data network devices.

The following figures illustrate the products that comprise the Mitel Enterprise Management solution.

13

SX-2000 General Information Guide

For more information, refer to Enterprise Manager General Information Guide.

OPS Manager
OPS Manager is a telecommunications management tool that enables you to control the maintenance and operation of a network of Mitel systems. From the OPS Manager station, you can perform the following functions on a single system or on network of systems: Manage a network telephone directory Move, add, change, and delete users Integrate the network telephone directory with a directory service database Schedule automatic upgrades, database saves, and database restores Perform remote network element programming and maintenance Synchronize the network element clocks with the clock in the OPS Manager server Use Station Message Detail Recording (SMDR) to track calls Automate day and night service Locate unused directory numbers and unused circuits.

OPS Manager is available as software only (installed on a user/dealer provided server). OPS Manager runs on Windows 2000 Server, Windows XP, Windows XP SP2, or Windows 2003. A direct OPS Manager login is provided rather than an Enterprise Manager login. Note that OPS Manager requires the installation of Enterprise Manager.

14

Supporting Applications

7100 Management Access Point

The Management Access Point provides secure remote management access and optional alarm monitoring of the SX-2000 over public network connections. It offers access security and customer protection using dial-up or Internet VPN connectivity. The Management Access Point requires no additional client software. It uses a 10baseT Ethernet connection to the customer network and the dialup versions of the product support connectivity for up to five IP-based systems over standard dialup PSTN V.90 modem. The broadband VPN version, the Management Access Point E/E, provides support for up to 16 IP systems for Internet VPN or dialup modem access. Because it has two IP addresses, a redundant SX-2000 LIGHT appears as two IP systems to the Management Access Point. Remote service engineers connect to the Management Access Point via a PPP or PPTP connection using standard Windows Network Connectivity capabilities and MS-CHAPv2 authentication. However, in order to connect to the Management Access Point console, the customer must enable a privileged remote session for the engineer. The remote engineer can establish an IP connection only to local IP destinations that are configured in the Management Access Point. The engineer must know the destination IP address in order to reach a managed session. At that point, the engineer must have a valid system login account to access the remote system. Once the engineer is logged into the remote system, any administrative, maintenance or diagnostic task can be performed. Note: Network Address Translation (NAT) is enabled by default in the Management Access Point which means that only the IP address assigned to the Management Access Point LAN port needs to be routable on the customer network. If NAT is disable in the Management Access Point, the IP subnet on the PPP connection must be unique within the customer's IP address space, be private (conform to the rules of RFC1918) and be routable within the customers network (the customer must redistribute the private route into their routing table).

SX-2000 Alarm Monitoring

The SX-2000 alarm application enables the Management Access Point to monitor Ethernet-equipped SX-2000 systems for SNMP alarms and relay them to a remote alarm management system and/or email account. The license key to permanently install this application on a particular 7100 MAP is provided when you order SX-2000 alarm monitoring. SNMP alarms are generated by the SX-2000 any time a change in the overall system alarm condition (Clear, Minor, Major, Critical) occurs (requires SNMP option enabled on SX-2000). The Management Access Point Supports CLI-based call screening so calls are screened based on the origination of phone numbers. (See the latest Management Access Point FCI for supported countries.) Uses Point-to-Point (PPP) and Challenge Handshake Authentication (CHAP) protocols to prevent passwords from being sniffed or captured and replayed. Provides an embedded firewall so access is restricted to select devices and the customer LAN is fully protected.

15

SX-2000 General Information Guide

Prevents remote Management Access Point configuration or firewall changes without the customer granting privilege. Tracks configuration changes during privileged connections. Supports source IP address screening for VPN connections with the Management Access Point E/E unit.

The Management Access Point is available in the following versions:

Management Access Point Features access to remotely managed SX-2000s access to up to 5 IP-based systems or application servers access to OPS Manager network ping monitoring of the managed IP systems optional SNMP alarm monitoring of SX2000 and 3300 ICP

Management Access Point E/M

(Ethernet/Modem)

Management Access Point E/M/S as above plus connectivity to two serial port devices
(Ethernet/Modem/Serial)

Management Access Point

E/M/S/U (Ethernet/Modem/Serial/UPS)

as above plus an integrated four-hour UPS

Management Access Point E/E

(Dual Ethernet and Modem)

same as Management Access Point, but support for 16 IP devices second Ethernet port to support VPN connections

16

Supporting Applications

Mitel 6100 Contact Center Solutions

6100 Contact Center Solutions combines robust communications platforms, Automated Call Distribution (ACD), and a modular suite of feature-rich, web-based applications for streamlining contact center management, and enabling advanced multimedia customer contacts. The 6100 Contact Center Solutions portfolio includes: Mitel 6100 Contact Center is a browser-based application that provides real-time and historical monitoring as well as agent forecasting. Mitel 6110 Contact Center Management Enterprise Node is an add-on product to Contact Center that provides multi-switch (remote and/or co-located) enterprise-wide historical reporting and real-time monitoring. Mitel 6115 Interactive Contact Center is an application that allows you to control agent and queue states instantly and easily via the Contact Center real-time display. Interactive Contact Center integrates with Contact Center and Mitel 6150 Multimedia Contact Center to provide virtual queuing. Mitel 6120 Contact Center Scheduling is an application that integrates with the Contact Center Forecasting functionality to provide automatic agent scheduling, based on business rules and required skills. Mitel 6125 Real-time Schedule Adherence is an add-on product to Contact Center Scheduling that allows you to see what agents are doing in relation to what is scheduled and quickly identify areas of non-adherence. Mitel 6140 Contact Center Agent Portal is an application that displays caller information on agent desktops via a number of different applications that can be configured to 'pop' or display automatically on any desktop. Mitel 6150 Multimedia Contact Center is an an advanced contact distribution package that integrates with Microsoft Exchange 2003 to route emails, chats and faxes to the longest idle agents in MS Outlook. Mitel 6160 Contact Center Intelligent Queue is an a browser-based recorded announcement solution that provides standard recorded announcements, intelligent messaging capabilities, routing and callback.

6100 Contact Center Solutions is described in detail in 6100 Contact Center Solutions General Information Guide.

NuPoint Messenger
NuPoint Messenger is a PC-based voice mail and messaging package that works with the Mitel system. It provides online maintenance and configuration, and enhanced security. NuPoint Messenger can support up to four languages per system simultaneously. It also supports individual, workgroup, and enterprise requirements, softkey integration on SUPERSET telephones, and allows for centralized voice mail in organizations with multiple systems. NuPoint Messenger modules offer the following: Call Processing and Auto Attendant

17

SX-2000 General Information Guide

Integrated Fax Messaging and Management Paging Support Lodging Industry Support PC-based Client Applications for Mailbox Control.

Emergency Response Adviser

Emergency Response Adviser is an application that runs on a Microsoft Windows-compatible server and one or more remote terminals. It provides local security personnel with an emergency call display and response console that: 1. Alerts them to new emergency calls 2. Identifies the exact location of the phone that was used to dial the emergency number 3. Lists any helpful extra information 4. Waits until they acknowledge the call 5. Logs the call and time of acknowledgement. It adds this functionality to the existing Emergency Services feature package offered by the SX-2000 system. The switch performs the actual routing of emergency calls to the Public Safety Answering Point (PSAP) where emergency personnel (such as fire or ambulance) are dispatched by PSAP call-takers. Emergency Response Adviser has options for alerting mobile personnel via their phones or their pagers. It can also simplify the generation of data files necessary for keeping the PSAP up-to-date with physical plant changes (an essential part of the E-911 management). For more information, refer to the Emergency Response Adviser Installation and Maintenance Guide. This guide can be downloaded from the Mitel Online web site.

18

Configuration

Configuration
The SX-2000 LIGHT system consists of a redundant main control cabinet and associated peripheral cabinets, Digital Service Unit (DSU) cabinets, and Network Services Units (NSUs). Fiber optic cables connect the peripheral cabinets, DSU cabinets, and NSUs to the main control cabinet. Copper cables from the extensions terminate at the peripheral cabinet. Installers do not have to route the extension cables between many floors or run the cables off-premises to a centrally-located system. Depending on the Fiber Interface Module (FIM) that is used, the peripheral cabinets, DSU cabinets, and NSUs can be located up to 0.62 miles (1 km), 1.9 miles (3 km), or 8.7 miles (14 km) from the main control cabinet. This versatility allows system resources such as lines, trunks, and digital service applications to be physically distributed among several remote locations. For example, one peripheral cabinet might provide the telephone service to a companys head office, while another provides telephone service to a manufacturing facility in a different building. Even though the peripheral cabinets are in different locations, they connect to the same main control cabinet by using a pair of fiber optic cables.

Control Cabinets - Redundant SX-2000 LIGHT System

The Control Redundant SX-2000 LIGHT system supports applications that require up to 3000 lines, page 9. The redundant main control cabinet provides full back-up, including independent power supplies, so that system operation will not be affected if a main control component fails. When the system switches to the alternate main control, calls in progress are not dropped and callers are unaware of the system event. The redundant main control cabinet can support up to eleven expanded peripheral nodes (see page 21), five DSU cabinets (see page 30), or five Network Services Units (see page 31).

19

SX-2000 General Information Guide

The redundant control node consists of the following components: Control Cards: The control node contains two Main Controller cards, two Circuit Switch Matrix cards, a Mass Storage Expander (MSX) card, and a Control Resource card (CRC). Remote Storage Device (RSD) drive: An ISO-standard, 3.5 inch, magneto-optical disk drive is mounted just below the hard disk drive on the front of the cabinet. Control Panel: The control panel, located on the right side of the front panel below the hard disk, provides system controls and indicators, page 77. The control panel is not visible unless the front panel of the cabinet is removed. Cabinet Frame: The redundant control cabinet is separated into three shelves. Shelf 1 and Shelf 2 are located at the front of the cabinet and hold the redundant power modules and control cards. Shelf 3, at the back of the cabinet, holds the FIMs. Two Redundant Power Modules: Each redundant power module provides power from one of the power supplies to the MSX card, the CRC card, the FIMs, and the RSD drive. Two Power Supplies: 200 Watt AC or 150 Watt DC power supplies provide redundant power for the cabinet. The power supply fans cool the cabinet. Two Hard Disk Drives: The 3.5 inch wide x 1 inch high SCSI hard disks are mounted side-by-side at the top of the cabinet. The hard disk drives are visible through openings in the front cover. Fiber Interface Modules (FIMs): The control node holds up to 11 Fiber Interface Modules. Quad Fiber Interface Module (FIM) Carrier: Up to three 5 inch wide x 4.5 inch high (12.7 cm x 11.4 cm) Quad FIM Carriers can be set in the rear panel. Each Quad FIM Carrier holds a Quad FIM Carrier card and up to four Fiber Interface Modules (FIMs). The FIMs in a Quad FIM Carrier connect to the control backplane through two ribbon cables. You install four standoffs on the rear panel; you install two in the top corners of the Quad FIM Carrier cards and two in the bottom two corners. These standoffs extend beyond the fiber cable connectors to protect them from being damaged against a wall. You do not install anything on these standoffs. Redundant Control Backplane: The backplane is designed to accommodate two Main Controller (MC) cards, two CSM cards, the CRC card, the Mass Storage Expander (MSX) card, two redundant power modules, and a landing point for three pairs of FIM Carrier card ribbon cable connectors. The backplane distributes redundant power to the FIM carriers, the MSX card, the CRC card, and the control panel. Rear Panel: The following switches and connectors are provided on the rear panel of the cabinet: Two power on/off switches (one for each power supply) Two small red sliding-type switches for selecting the input power source. The switch can be set to either 115 Vac, 60 Hz or 230 Vac, 50 Hz. Two 3-conductor male receptacles to connect two independent AC power sources or 2 DC terminal blocks Two 3-conductor female power receptacles

20

Configuration

Caution: Do not connect any devices to the female power receptacles.

Tx and Rx connectors on each Fiber Interface Module An RS-232 printer port for call accounting output Two RS-232 Maintenance Terminal ports; one for each plane A remote alarms port.

Peripheral Cabinets
Each peripheral cabinet holds up to 12 Peripheral Interface Cards and provides up to 192 ONS or DNI ports. By purchasing the Peripheral Node Expansion feature package, a slave cabinet can be added that expands the node up to a total of 384 ports and 24 Peripheral Interface cards (the number of voice channels remains the same). One Peripheral Switch Controller (PSC) card and one Fiber Interface Module (FIM) are installed in the master cabinet of each peripheral node. The PSC card provides control for all Peripheral Interface cards, and a fiber optic cable connects the FIM to the main control.

Peripheral Cabinet II

21

SX-2000 General Information Guide

The peripheral cabinet consists of the following components: Peripheral Interface Cards: The Peripheral Interface cards connect telephone trunks and peripheral devices (such as SUPERSET telephones) to the system. They are located in slots 1 through 12. Power Converter (AC): The AC power converter converts AC input power to the voltages required by the circuit cards and FIMs (+5 Vdc, +12 Vdc, -27 Vdc, -48 Vdc and 80 Vac ringing). It is installed in slots 13 to 15. Power Converter (DC): The DC power converter converts DC input power to the voltages required by the circuit cards and FIMs (+5 Vdc, +12 Vdc, -27Vdc, and 80 Vac ringing). It is installed in slots 13 to 15. Peripheral Switch Controller card (PSC): The PSC card performs all peripheral switch functions for up to 12 Peripheral Interface cards (or 24 cards with the addition of a peripheral slave cabinet, see Peripheral Node Expansion feature package for details). It is installed in slot 16 of the master peripheral cabinet. Fiber Interface Module (FIM): The FIM connects the peripheral node to the control node. It is installed in slot 17 of the master peripheral cabinet. Cabinet Frame: Each peripheral cabinet has 17 slots numbered from left to right. Slots 1 to 12 support Peripheral Interface cards and slots 13 to 15 hold the Power Converter. A master peripheral cabinet also holds a PSC card in slot 16, a FIM in slot 17, and a Peripheral Interconnect card in slot 16B (if your node is expanded). A peripheral slave cabinet holds a Peripheral Interconnect card in slot 16, in addition to the Peripheral Interface cards and Power Converter. Slots 16B and 17 of the slave cabinet are not programmable. For more information on expanded peripheral nodes, see the Peripheral Node Expansion feature package. Power Distribution Unit (PDU) (AC): The AC PDU filters and switches the 120/240 Vac input power to the Power Converter and fan assembly. Power Distribution Unit (PDU) (DC): The DC PDU filters and switches the -48 Vdc input power to the Power Converter and fan assembly. Note that the server is available in AC version only. Fan Assembly: Two fans in the removable fan assembly cool the cabinet. Rear Panel: The following switches and connectors are located on the rear panel of the cabinet: A power on/off switch A fuse to protect the line lead on the input power (AC systems) or circuit breaker (DC systems) A 3-conductor male receptacle to connect AC input power A sliding door for the Tx and Rx fiber optic cables An RS-232 Maintenance Terminal port for remote access (remote maintenance connections will only work on the master cabinet of a peripheral pair) Nine 25-pair male, filtered, Amphenol connectors are located on the rear panel. All lines and trunks from the main distribution frame connect to the eight horizontally positioned connectors using 25-pair cable. The single vertically positioned 25-pair D-phone connector provides power and contact closure to an optional external system

22

Configuration

fail transfer unit. A 3-conductor female plug is recessed in the rear panel behind a small cover plate (AC systems only). The plug connects to the power connector on the AC Power converter. A ground connector.

SUPERSET HUB
The SUPERSET HUB builds on the distributed system concept by delivering advanced digital telephony functionality for workgroups. It allows SUPERSET telephones to be cost-effectively provided where a distributed system would be too expensive. The SUPERSET HUB provides DNIC connectivity through an RJ-45 patch panel and Fiber Interface Module (FIM) connection to the host peripheral cabinet. At the peripheral cabinet, a carrier module provides the connection for the FIM and interfaces back into the system. The SUPERSET HUB may be rack-mounted or wall-mounted.

SUPERSET HUB Front Panel

23

SX-2000 General Information Guide

SUPERSET HUB Rear Panel

System Fail Transfer

The SFT maintains telephone service in the event of system failure (such as a power outage). When the system goes into SFT mode, the SFT unit connects up to six internal POTS telephone extensions directly to the CO, bypassing the system completely. The SFT is an optional, stand-alone, wall-mounted device that connects to the systems peripheral cabinet or main distribution frame (MDF). Each SFT can control six circuits, and up to four SFTs can be daisy-chained together for each zone, providing security for 24 internal extensions. The SFT switches to SFT mode under the following conditions: Failure of the system power converter Failure of the system main control (in a redundant system, both main control planes must fail, causing a critical alarm to all zones) Interruption of the system AC power Failure of the peripheral switch controller (zone) Loss of the fiber link between the main control and peripheral cabinets.

Power Supply All power for the SFT unit is provided from the -48 Vbat source on the system. A source of -12 V powers the electronic circuitry on the card. This supply is derived from the -48 V input and powers all the SFT circuitry except the transfer relays. The relays are powered by a transistor-regulated -41V source, also derived from the -48 Vbat input; therefore, in the event of Vbat varying between the standard -42.5 V to -56.5 V, the current drain remains constant.

24

Configuration

Transfer Relays Each circuit in the SFT uses a four form C relay to transfer between normal and SFT modes of operation. Loop Detector When a transfer relay enters SFT mode, the loop detector connects in series with the loop between the extension and CO trunk facility. This circuit prevents the extension from returning to normal operating mode before an SFT mode call is completed. When the SFT mode call is completed, the extension is returned to normal operating mode. SFT Control Leads The transfer control sensor on the SFT senses a loop closure across the SFT and SFT return (SFTR) leads. When a loop closure is sensed, the power to the relays is removed, the relays are released, and all circuits enter the transferred state. Power Consumption The total current drain for the SFT is typically 80 mA. Power Dissipation (watts)
Power Supply -48Vbat @Vbat=-56 V TYP. (Watts) 3.18 3.71 TYP+20% 3.81 4.45

Peripheral Cards
Peripheral Interface cards join telephone trunks and peripheral devices (such as SUPERSET telephones) to the system. Peripheral interface cards include line cards, page 25, and trunk cards, page 26.

Line Cards
Line cards connect to single line sets, SUPERSETs, attendant consoles, and DATASETs. They include Control Over Voice (COV) Line Card, page 26 Digital Network Interface (DNI) Line Card, page 26 On-Premise (ONS) Line Card, page 26 Off-Premise (OPS) Line Card, page 26.

25

SX-2000 General Information Guide

COV Line Card The Control Over Voice (COV) line card supports COV voice mail systems and interfaces SUPERSET 4 telephones to the SX-2000 system. The COV line card has 12 circuits. DNI Line Card The Digital Network Interface (DNI) line card supports music-on-hold and paging and interfaces with MITEL digital network devices (including SUPERSET telephones, attendant consoles, and DATASETs). The DNI line card provides 16 voice and data lines and has 16 circuits. ONS Line Card The On-Premise (ONS) line card has 16 circuits that connect up to 16 standard telephones with line loop resistance usually not exceeding 400 ohms. As such, the ONS line card is used to connect internal telephone extensions close to the system. It also supports modems and fax machines. Note: The On-Premise (ONS) CLASS/CLIP line card supports the same functionality as the ONS line card, but it also provides Custom Local Area Signaling Service (CLASS) or Caller Line Identification Presentation (CLIP) functionality when enabled by the software. OPS Line Card The Off-Premise (OPS) line card is a digital card that has eight circuits and interfaces a maximum of eight outside telephone extensions with the system. The card is meant to interface telephone extensions whose line loop resistance exceeds 400 ohms. As such, the OPS line card is used to connect external telephone systems whose loop resistance is anywhere from 400 to 1600 ohms (external resistance from 600 to 1800 ohms).

Trunk Cards
Trunk cards provide an interface from the system to the public switched network and leased lines.They include Loop Start/Ground Start (LS/GS) trunk card, page 26 Ear & Mouth (E&M) trunk card, page 27 Direct Inward Dialing/Loop Tie (DID/LT) trunk card, page 27.

LS/GS Trunk Card The Loop Start/Ground Start (LS/GS) trunk card interfaces to the analog LS/GS Central Office (CO) trunks, and is used to terminate eight CO trunks (non-dial-in trunks). The LS/GS trunk card connects to any Peripheral Interface card slot on the peripheral shelf via connectors J1 and J2. The LS/GS trunk card has eight circuits.

26

Configuration

E&M Trunk Card The Ear and Mouth (E&M) trunk card provides a means of interfacing four external trunk circuits to the system. E&M trunk cards connect to any Peripheral Interface card slot on the peripheral shelf via connectors J1 and J2. The E&M trunk card ties two switches together (tie line), and supports music-on-hold. The E&M trunk card has four circuits. DID/LT Trunk Card The Direct Inward Dialing (DID) Loop Tie trunk card terminates a maximum of four trunks. These trunks can be Direct Inward Dialing (DID) trunks, Loop Tie (LT) trunks, or any combination of DID and LT Trunks. Direct Inward Dialing provides direct access to system subscriber lines from the public telephone network. Loop Tie provides a means of connecting two systems together over a common trunk. The DID Loop Tie trunk card involves renting a group of numbers from the CO. With this card, outside calls are switched directly to the extension called; therefore, no attendant is required.

Migration
Customers can migrate from an SX-2000 LIGHT or MicroLIGHT to a 3300 ICP. The Mitel 3300 Configuration tool converts and restores an existing SX-2000 database to a 3300 ICP. For more information, refer to one of the following migration scenarios: Migration of SX-2000 to 3300 ICP (3300 ICP takes control) on page 28 Migration of SX-2000 to 3300 ICP (SX-2000 retains control) on page 29

27

SX-2000 General Information Guide

Migration of SX-2000 to 3300 ICP (3300 ICP takes control)

In this migration, the 3300 ICP takes control of the SX-2000 peripherals and provides the same call control functionality as the SX-2000. In addition, the 3300 ICP supports IP phones and applications.

28

Configuration

Migration of SX-2000 to 3300 ICP (SX-2000 retains control)

In this migration, the SX-2000 retains control of the existing system, phones and trunks. The 3300 ICP provides control for the IP phones and any required applications. A seamless network exists between the SX-2000 and the 3300 ICP. The following diagrams show migrations of the current SX-2000 LIGHT and MICROLIGHT systems to the 3300 ICP.

29

SX-2000 General Information Guide

Digital Service Unit (DSU) Cabinet

Note: The DSU cabinet has been discontinued; however, it is still supported. A Digital Service Unit (DSU) cabinet holds up to four DSU cards and two FIMs. The DSU cards provide digital trunk interfaces for public or private network access and specialized digital functions (such as messaging, expanded conferencing, and ISDN service). The FIMs support the transmission of voice and data signals between nodes.

The DSU cabinet consists of the following components: Cabinet Frame: The DSU cabinet is separated into two shelves. Shelf 1 is located at the bottom of the cabinet and Shelf 2 is located at the top of the cabinet (both shelves are at the front of the cabinet). Shelf 1 consists of slots 1 to 6 and contains 2 FIMs and 4 DSUs. Shelf 2 consists of two Peripheral Resource Cards (PRCs). Power Supply: The 200 Watt AC or 150 Watt DC power supply provides power for the cabinet. The power supply fan cools the cabinet. Peripheral Resource Cards: The peripheral resource cards provide additional circuitry to support the distributed architecture. These cards are installed in Shelf 2, slots 1 and 6. Fiber Interface Modules (FIMs): The DSU cabinet holds up to two fiber interface modules (FIMs). Each FIM supports two DSU cards; the FIM installed in Shelf 1, slot 1 supports the DSU cards in Shelf 1, slots 2 and 3. The FIM in Shelf 1, slot 6 supports the DSU cards in Shelf 1, slots 4 and 5. DSU Cards: The DSU cabinet holds up to four DSU cards. These are intelligent cards that provide specialized digital functions. The DSU cards are installed in Shelf 1, slots 2 to 5.

30

Configuration

DSU Backplane: The backplane holds up to four DSU cards, two fiber interface modules, two peripheral resource cards, the power supply cable, and two Maintenance Terminal ports. The four DSU cards are split into pairs (each pair with a FIM, Peripheral Resource card, and maintenance port). The following switches and connectors are located on the DSU backplane (rear panel): A power on/off switch A small red sliding switch for selecting the input power source. The switch can be set to either 115 Vac, 60 Hz or 230 Vac, 50 Hz (AC systems only). A 3-conductor male receptacle to connect AC power (AC systems only) A 3-conductor terminal block to connect DC power (DC systems only) A sliding panel for the Tx and Rx fiber optic cables Two RS-232 Maintenance Terminal ports A 3 inch wide x 4 inch high (7.6 cm x 10.2 cm) metal box projecting from the middle of the panel. The box holds up to four CEPT or DS1 Interface Assemblies.

Network Services Units

The Network Services Units (NSUs) provide connectivity to digital trunks for public or private networks. Protocol support includes DASS II, PRI, BRI, MSDN/DPNSS, R2, T1/ D4, E1, QSIG, and XNET. There are three variants of NSU: Universal Network Services Unit (NSU), page 31 R2 Network Services Unit (NSU), page 33 BRI Network Services Unit (NSU), page 34. Note: The SX-2000 uses the same NSUs as the Mitel 3300 Integrated Communications Platform.

Universal Network Services Unit

The Universal NSU provides T1 or E1 connectivity and supports up to two T1 or E1 links per unit. The protocols supported by the T1 interfaces are T1 CAS - Digital E&M, Digital CO, Digital DID T1 CCS - Primary Rate ISDN (4ESS, DMS 100, DMS 250, NI-2, NI-2-5ESS, NI2-GTD5), XNET over PRI, QSIG, and MSDN/DPNSS.

The protocols supported by the E1 interfaces are QSIG, Euro ISDN, XNET over PRI, DASS II, and MSDN/DPNSS. Note: Both interfaces must run the same protocol. The Universal NSU connects to an SX-2000 control node through a fiber optic cable. Additional digital trunk capacity can be added to the SX-2000 system by chaining two NSUs together.

31

SX-2000 General Information Guide

NSUs are chained together by connecting a Category 5 crossover cable from a Copper Interface Module (CIM) port on one NSU to a CIM port on the other.

Universal NSU Front Panel The Universal NSU front panel consists of the following components: RS-232 serial port (DB-9 connector to a PC) for maintenance purposes such as field installation, database upgrade, access to logs, and modem connection for remote access Ethernet port (RJ-45 connector) for administration with IMAT Two FIM ports (1 Tx, 1 Rx) Two CIM ports Faceplate LEDs - Miscellaneous, Link Status, and Message Link Controlled Reset pin.

Universal NSU Rear Panel The Universal NSU rear panel consists of the following components: Message Link DIP switch for designating a unit number (1 or 2) when two NSUs are chained together Two T1/ E1 ports for network connection Two hybrid port status LEDs Two hybrid port DIP switch complexes Protective ground for grounding the chassis Standard Male IEC AC input power connector.

32

Configuration

R2 Network Services Unit

The R2 Network Services Unit (NSU) provides connectivity for R2 National Public Switched Telephone Network (PSTN) using MF-R2 digital trunk signaling. The R2 NSU supports two E1 links. The R2 NSU connects to an SX-2000 control node through a fiber optic cable. Additional digital trunk capacity can be added to the SX-2000 system by chaining two NSUs together. NSUs are chained together by connecting a Category 5 crossover cable from a Copper Interface Module (CIM) port on one NSU to a CIM port on the other.

R2 NSU Front Panel The R2 NSU front panel consists of the following components: RS-232 serial port (DB-9 connector to a PC) for maintenance purposes such as field installation, database upgrade, access to logs, and modem connection for remote access Ethernet port (RJ-45 connector) for future use Two FIM ports (1 Tx, 1 Rx) Two CIM ports Faceplate LEDs - Miscellaneous, Link Status, and Message Link Controlled Reset pin.

R2 NSU Rear Panel The R2 NSU rear panel consists of the following components: Message Link DIP switch for designating a unit number (1 or 2) when two NSUs are chained together

33

SX-2000 General Information Guide

Two E1 ports for network connection Two E1 port status LEDs Two E1 port DIP switch complexes Protective ground for grounding the chassis Standard Male IEC AC input power connector.

BRI Network Services Unit

The BRI Network Services Unit (NSU) provides connectivity for Basic Rate ISDN (BRI) transport of both data and voice traffic. This unit is available in North American and European variants. The North American variant supports user-side interface. The European variant supports both network and user-side interfaces. The BRI NSU supports 15 BRI U-interfaces per unit. It does not connect directly to an SX-2000 system but rather to the Universal NSU through a copper cable.

BRI NSU Front Panel The BRI NSU front panel consists of the following components: RS-232 serial port (DB-9 connector) for installation, configuration, and maintenance BRI Circuit LEDs CEPT link Status LED Power LED Reset pin.

BRI NSU Rear Panel The BRI NSU rear panel consists of the following components: Ethernet port (RJ-45 connector) for future use

34

Configuration

E1 port to connect to an NSU running E1 DPNSS E1 port DIP switches BRI connector (25-pair male D-type) Protective ground for grounding the chassis Standard Male IEC AC input power connector. Note: UK BRI will drive power to the BRI circuits; the NA BRI will not.

35

SX-2000 General Information Guide

Peripherals
The system connects to any of the following peripheral devices: Telephones SUPERSET 4001, page 38, single-line telephone SUPERSET 4015, page 39, SUPERSET 4025, page 40, SUPERSET 4125, page 41, and SUPERSET 4150, page 42, multiline telephones SUPERSET 410, page 43, multiline telephones

Programmable Key Modules Programmable Key Module 12, page 45 Programmable Key Module 48, page 46

Digital Line Monitors Single-line Digital Line Monitor, page 47

Attendant Consoles SUPERCONSOLE 1000, page 48 attendant console SUPERCONSOLE 2000, page 49, attendant console

Datasets Dataset 2103, page 51 Dataset 2203, page 52

Other Devices Console DSS/BLF Interface Unit, page 50 Analog devices such as the SUPERSET Interface Module 1 (SIM1), ONS telephones, fax machines, or modems DNIC Music On Hold /Pager unit, page 53

Discontinued Peripheral Devices SUPERSET 401, SUPERSET 401+, SUPERSET 420, and SUPERSET 430 telephones SUPERSET 3, SUPERSET 3DN, SUPERSET 4, SUPERSET 4DN telephones SUPERSET 7DN attendant console MILINK Data Module MILINK Programmable Key Module DATASET 1101, DATASET 1102, DATASET 1103, DATASET 2102, and DATASET 2202 DATACABINET 9000 DATASHELF 9100

36

Peripherals

SUPERSET 4000 Series Telephones

The following are the SUPERSET 4000 series telephones: SUPERSET 4001, page 38 single-line telephone SUPERSET 4015, page 39 multiline telephone with basic LCD display SUPERSET 4025, page 40 multiline telephone with enhanced LCD display SUPERSET 4125, page 41, multiline telephone with enhanced LCD display and built-in RS-232 interface for computer connection SUPERSET 4150, page 42 multiline telephone with touch-sensitive LCD display and built-in RS-232 interface for computer connection.

The SUPERSET 4000 series telephones can be mounted on a wall and/or tilted. The SUPERSET 4000 series telephones and the PKM48 are available in light or dark grey. Adding an Interface Module to a SUPERSET 4025, SUPERSET 4125, or SUPERSET 4150 telephone lets you connect to additional devices.
Interface Modules SUPERSET Interface Module I (SIM1) SUPERSET Interface Module 2 (SIM2) Note:You cannot connect a PKM48 to a SIM2. Connected Device

PKM12, page 45, PKM48, page 46

analog devices

37

SX-2000 General Information Guide

SUPERSET 4001 Telephone

The SUPERSET 4001 telephone is a single-line, digital telephone that gives users basic access to system functionality. The SUPERSET 4001 telephone has Seven Speed Call keys Four fixed-function keys: Program, Hold, Flash, and Message Handset and ringer volume controls (Up Arrow and Down Arrow) Ringer pitch control Message waiting lamp.

For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 4001 Telephone

38

Peripherals

SUPERSET 4015 Telephone

The SUPERSET 4015 telephone is a multiline, digital telephone with Twenty-character alpha-numeric liquid crystal display (LCD) Seven line keys, each with a built-in line status indicator Six fixed-function keys: SuperKey, Cancel, Hold, Redial, Transfer/Conference, and Message Automatic selection of prime line or ringing line Key selection of non-prime line Handset and ringer volume controls (Up Arrow and Down Arrow) Ringer pitch control Message waiting lamp.

For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 4015 Telephone

39

SX-2000 General Information Guide

SUPERSET 4025 Telephone

The SUPERSET 4025 telephone is a multiline, digital telephone with Twenty-character alpha-numeric liquid crystal display (LCD) with contrast control Three softkeys for feature access Fourteen line keys, each with a built-in line status indicator Eight fixed-function keys: SuperKey, Cancel, Hold, Redial, Transfer/Conference, Message, Microphone, and Speaker Automatic selection of prime line Key selection of non-prime line Handsfree operation (half-duplex) Handset, speaker, and ringer volume controls (Up Arrow and Down Arrow) Ringer pitch control Message waiting lamp.

The SUPERSET 4025 supports the SIM1 and SIM2 Interface Modules, page 37 for connection to additional devices. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 4025 Telephone

40

Peripherals

SUPERSET 4125 Telephone

The SUPERSET 4125 telephone is a multiline, digital telephone with Twenty-character alpha-numeric liquid crystal display (LCD) with contrast control Three softkeys for feature access Fourteen line keys, each with a built-in line status indicator Eight fixed-function keys: SuperKey, Cancel, Hold, Redial, Transfer/Conference, Message, Microphone, and Speaker Built-in RS-232 interface for a computer connection Automatic selection of prime line Key selection of non-prime line Handsfree operation (half-duplex) Handset, speaker, and ringer volume controls (Up Arrow and Down Arrow) Ringer pitch control Message waiting lamp.

The telephone has the same set functionality as the SUPERSET 4025, and has a backlit digital display. The SUPERSET 4125 supports the SIM1 and SIM2 Interface Modules, page 37 for connection to additional devices. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 4125 Telephone

41

SX-2000 General Information Guide

SUPERSET 4150 Telephone

The SUPERSET 4150 telephone is a multiline, digital telephone with Forty-character alpha-numeric liquid crystal display (LCD) with contrast control and six touch-sensitive softkey areas for feature access Fourteen line keys, each with a built-in line status indicator Four fixed-function keys: SuperKey, Hold, Redial, Speaker, and Microphone Built-in RS-232 interface for a computer connection Automatic selection of prime line Key selection of non-prime line Handsfree operation (full-duplex if AC adapter is plugged in) Handset, speaker, and ringer volume controls (Up Arrow and Down Arrow) Ringer pitch control Message waiting lamp.

The SUPERSET 4150 also accepts a SIM1 and SIM2 Interface Modules, page 37 that lets you connect to additional devices. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 4150 Telephone

42

Peripherals

SUPERSET 400 Series Telephones

The SUPERSET 400 series telephones includes the SUPERSET 410, page 43, multiline telephone with LCD display and MILINK network connection. The SUPERSET 410 telephone is available in light or dark grey. Note: The SUPERSET 401, SUPERSET 401+, SUPERSET 420, and SUPERSET 430 telephones, and the MILINK Data Module and MILINK Programmable Key Module have been discontinued; however, these peripherals are still supported.

SUPERSET 410 Telephone

The SUPERSET 410 telephone is a multiline, digital telephone with Six line keys, each with an LCD line status indicator Ten fixed-function keys: SuperKey, Cancel, Hold, Redial, Transfer/Conference, Message, Speaker, Microphone, and two Volume/Tone/Contrast controls Automatic selection of prime line or ringing line Key selection of non-prime line Handsfree operation Speaker, handset Ringer pitch control Message waiting LED Optional data access using the MILINK data module.

For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET 410 Telephone

43

SX-2000 General Information Guide

SUPERSET Interface Module 2

The SUPERSET Interface Module 2 (SIM2) is an Analog Interface Module (AIM) which provides analog interface functionality that lets you connect one or more 2-wire analog devices (such as ONS telephones, fax machines, or modems) to the second B-channel of your SUPERSET 4025, SUPERSET 4125, or SUPERSET 4150 telephone. The sum of the Ringer Equivalence Numbers (REN) of all devices in the loop cannot exceed 2.0 REN. The analog device has its own directory number and operates independently from the host telephone; however, if you attach multiple analog devices in parallel, they share the second B-channel. The analog device connects to the Analog/Fax/Modem interface on the SIM2/IM, page 37. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERSET Interface Module 2

44

Peripherals

Programmable Key Modules

Programmable Key Module 12
The Programmable Key Module 12 (PKM12) is a digital device which provides 12 additional personal keys for SUPERSET 4025, SUPERSET 4125, and SUPERSET 4150 telephones. Each personal key can be programmed as a Feature key, Direct Station Select (DSS) key, Speed Call key, or for other uses. Each key has a Line Status Indicator that behaves the same as the indicators on the SUPERSET 4000 series telephones. The PKM12 connects to a SUPERSET 4000 series telephone using the included modular cable, and a SIM1 installed in the set. The module supplies power to the PKM12. Note: The PKM12 and PKM48 are the only programmable key modules qualified by MITEL for connection to SUPERSET 4000 series telephones. The PKM12 is not designed to connect to another PKM12. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM. Note: The PKM12 is programmed the same as a PKM48, but do not program keys 13 or above.

Programmable Key Module 12

45

SX-2000 General Information Guide

Programmable Key Module 48

The Programmable Key Module 48 (PKM48) provides 48 additional feature keys for SUPERSET 4025, SUPERSET 4125, and SUPERSET 4150 telephones. Each feature key has a Line Status Indicator that behaves the same way as those on SUPERSET 4000 series telephones. The PKM48 connects to the PKM interface on the SIM1. A second PKM48 can connect to the first to provide for 96 additional feature keys for the SUPERSET 4025 and SUPERSET 4150 telephones. You cannot connect a PKM48 to an AIM device, page 37. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

Programmable Key Module 48

46

Peripherals

Digital Line Monitor

Single-line Digital Line Monitor
The Single-line Digital Line Monitor (DLM) is used to record voice information from Mitel DNIC-based digital telephones or consoles on an externally connected tape recorder (not included). The unit records calls to/from the associated telephone only. The unit can be located anywhere within the building, wall mounted, or placed under a SUPERSET telephone. No system programming is required. A default warning tone is repeated on the line every 15 seconds, which can be heard by all parties in a monitored conversation and on the recording (the tone can be disabled). The DLM is transparent to the signals passing between the system and DNIC telephones, unless the warning tone is enabled. When power is removed from the DLM, the unit is by-passed internally. The DNIC telephone or console will continue to work, but the conversation will no longer be recorded. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

Single-line Digital Line Monitor

47

SX-2000 General Information Guide

Attendant Consoles
SUPERCONSOLE 1000 Attendant Console
The SUPERCONSOLE 1000 attendant console is used to perform call handling functions as well as some maintenance and administrative functions (such as moves and changes). The 4-line by 80-character alphanumeric display shows source and destination information, time and date information, call waiting information, and station information (such as COS and COR values). Macros can be programmed to facilitate the transfer of calls to voice mail, recover calls released to the wrong extension, dial frequently called numbers using one button. The console has Fourteen hardkeys Four programmable firmkeys (for access to purchased options such as Hotel/Motel) Ten softkeys A dial pad (for both alphabetic and numeric input) Backlit display Volume controls Integral handset Connector for a headset An RS-232 serial printer port. Note: A PKM port is located on the back of the unit which can only be used with the SX-200 system. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERCONSOLE 1000 Attendant Console 48

Peripherals

SUPERCONSOLE 2000 Attendant Console

The SUPERCONSOLE 2000 (SC2000) is an attendant console and administration application for the SX-2000 telephone system. It features a specialized keypad and intuitive user interface for smooth, efficient call handling. The SC2000 is intended as a replacement for the SS700 product and delivers the same functionality with the following exceptions: The SUPERSET 700 Colour system options do not apply. Colour for the SC2000 is manipulated through the host PC. Bulletin Board can be used to exchange messages between SC2000 consoles. The version command is not changed to show an SC2000 version as the SC2000 resident code is on the host PC, obtained from the SUPERCONSOLE 2000 application. The SC2000 does not support Message Centre functionality.

The SC2000 console consists of A keypad with jacks for connecting a handset or headset. Used for dialing, call handling and processing activities, and accessing features. Programmable keys AC power adapter Mitel 4000 series handset and cord Handset cradle USB and telephone line cords Application software CD-ROM

The SC2000 software will operate with Microsoft Windows 2000 and Windows XP Professional. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

SUPERCONSOLE 2000 Attendant Console

49

SX-2000 General Information Guide

Console DSS/BLF Interface Unit

The Console Direct Station Select/Busy Lamp Field (DSS/BLF) Interface Unit allows the association of one PKM48 with an attendant console. The PKM48 provides the attendant console user with the ability to determine which extensions are busy by glancing at the LED indicators. The unit provides additional line monitoring of directory numbers for speedy call flow and functions as a stand-alone BLF interface unit (DSS functionality is not provided). Note: Headsets and handsets cannot be attached to this unit. The Console DSS/BLF Interface Unit uses a separate line connection to a DNIC port. The PKM48 attaches to the Console DSS/BLF Interface Unit and is associated with the attendant console through Customer Data Entry (CDE). The maximum cable length between the unit and the PKM48 is 5m (16.4 ft). For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

50

Peripherals

Datasets
Datasets provide data communication facilities for terminals, computer ports, and other types of data circuits that are switched through the system. These datasets are the interface between the Digital Network Interface Circuit (DNIC) and the data devices connected to the system. The datasets transmit data and control signals over a single twisted pair of wires. Using a Mitel Dataset will allow you to carry voice and data communication over the same line. The system supports the following datasets: DATASET 2103, page 51, DATASET 2203, page 52, MILINK Data Module (North America only)

DATASET 2103
The stand-alone DATASET 2103 is a synchronous/asynchronous dataset which is used to connect peripheral data devices to the system. The DATASET 2103 is available in black only. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

DATASET 2103

51

SX-2000 General Information Guide

DATASET 2203
The stand-alone DATASET 2203 is a synchronous dataset which provides transparent synchronous communications for X.21 and V.35 compatible terminals. The DATASET 2303 is available in black only. For installation instructions, see the SX-2000 Install Peripherals section of the Technical Documentation CD-ROM.

DATASET 2203

52

Peripherals

DNIC Music On Hold/Pager Unit (DMP)

The DNIC Music On Hold/Pager (DMP) unit interfaces a port on the DNI Line card to an external music source for Music On Hold an external paging amplifier for Paging.

The unit is powered by the system and does not require a separate power source. A single 25-pair amphenol cable connects to the system via the main distribution frame (MDF); the unit can be wall-mounted. A single LED indicator provides basic status information. Each DMP supports one music source and one paging zone, and the system supports one music source and 16 paging zones (15 individual zones and 1 "all" zone). If you need more than one paging zone, you can use multiple units; for example, for 16 paging zones, you need 16 DMP units. Note: You can combine E&M paging with DMP Paging. For installation instructions, see the SX-2000 Install System section of the Technical Documentation CD-ROM.

DNIC Music On Hold / Pager Unit

53

SX-2000 General Information Guide

Features
Standard Features
The following table lists the standard features available on the SX-2000 system.
Standard Features Feature Name Description When a caller terminates a call while waiting for an attendant group, SMDR logs report the attendant groups 4 to 7 digit directory number in the Called Party field. The letters "ATT" or "AT" are not displayed. Default Account Codes are entered automatically by the system each time a user dials an external number. They may be used to segregate groups in SMDR for billing. Verified Account Codes allow you to access features that are not normally available at a station. These Account Codes can be used at any station to change the COS and COR. Non-verified Account Codes allow you to enter codes on the SMDR record for billing and/or call management.

Abandonded Call Against Attendant Attendant Group Account Codes - Default

Account Codes - Verified and Non-verified

Account Codes - System Add Held

System Account Codes are automatically outpulsed by the system when outgoing calls are made on a specialized carrier trunk circuit. Add Held allows you to move a call on Hold to another line appearance, form a conference with a call on Hold, or add a call on Hold to an existing conference. Advice of Charge (AOC) allows the caller to determine the cost of a toll call. See Attendant Directory Number, page 55. See Attendant Console Status Display, page 55. The Attendant Bulletin Board is shared by all SUPERCONSOLE 2000s on the system and is used to both post information that you want other attendants to see and to store speed dial numbers that all attendants can access Attendant Busy-Out (Console) places your attendant console in a busy-out condition (absent status) under certain circumstances. In the busy-out condition, incoming calls are automatically rerouted. Attendant Busy-Out (Station) lets you busy-out a specific station by using the attendant console. When you busy-out the station, it cannot be used or accessed. Priority can be assigned to calls based on their destination. The Attendant Call Information Display provides the attendant with information about called and calling parties. Attendant Call Selection lets you choose which group of incoming calls to answer first; each group is selected by pressing a softkey on the attendant console. Page 1 of 13

Advice of Charge Attendant Access Attendant Alarm Indications Attendant Bulletin Board

Attendant Busy-Out (Console)

Attendant Busy-Out (Station)

Attendant Call Answering Priority Attendant Call Information Display Attendant Call Selection

54

Features

Standard Features (continued) Feature Name Description Centralized Attendant Service (CAS) Interface allows the system to be a remote node for a CAS site. CAS is an attendant call handling service that is provided at a central office switch for calls from both public and private networks. Attendant Conference lets the attendant set up one or more conference connections between central office trunks and internal stations. See Peripherals, page 36. Multiple Attendant Consoles can be supported on the system. The number of consoles required must be determined by the customer prior to system installation. Attendant Console Firmkeys on your console can be programmed as one of the following feature keys: Phonebook, Guest Service (Hotel/Motel), Group Page, Trunk Status, Trunk Flash, Alarm, SMDA, Select Option, or blank (no application). Attendant Console Status Display on each attendant console displays various parameters such as Day/Night Service, Attendant Status, and Alarm Status. Attendant Directory Number lets you dial an attendant directory number (typically 0) to reach the attendant. Separate directory numbers can be programmed for each attendant console. Attendant Help provides you with online assistance. You do not have to terminate the current session to use Attendant Help; however, you must be in desktop or CDE mode. Hold lets you temporarily suspend a telephone call. While the call is on Hold, you can use the other telephone features. SUPERCONSOLE 2000 consoles can Hold up to six calls; SUPERCONSOLE 1000 consoles can Hold up to eight calls. Attendant Identity Information Display lets you view the consoles prime directory number, the system software version, and the consoles hold slot number. Attendant Lockout prevents the attendant from re-entering a call once the attendant has released. Attendant Messaging lets you activate a message waiting condition on a station from the attendant console. The condition can be queried or canceled by the attendant or by a station user with the appropriate Class of Service. Attendant Metered Calls lets you use the attendant console to track the cost of outgoing trunk calls. Attendant New Call Tone notifies you of new calls to the attendant console through an audible indication. See Attendant Busy-Out (Console), page 54. Page 2 of 13

Attendant CAS Interface

Attendant Conference Attendant Consoles Attendant Consoles (Multiple)

Attendant Console Firmkeys

Attendant Console Status Display Attendant Directory Number

Attendant Help

Attendant Hold

Attendant Identity Information Display Attendant Lockout Attendant Messaging

Attendant Metered Calls Attendant New Call Tone Attendant Position Busy-Out

55

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description Attendant Recall automatically alerts the attendant when a trunk call has been extended to an idle station and not answered within a specified time-out period or when a call on Hold at the console has not been answered within a selected time. Attendant Ringer Control lets you mute the attendant console ringer. When the attendant console ringer is muted, incoming calls continue to be indicated by the Call Waiting prompt at the top of the display. The Attendant Scratch Pad is your own personal telephone directory and Speed Dial list. Use it to save telephone numbers for faster dialing or to store the names and numbers of callers for future reference. Attendant Serial Call automatically returns a call to the attendant console when the caller finishes with the called party. The attendant can setup and cancel certain station features such as Call Forward, Do Not Disturb, Callback, and Reminder.

Attendant Recall

Attendant Ringer Control

Attendant Scratch Pad

Attendant Serial Call Attendant Setup and Cancellation of Station Features Attendant Station Busy-Out Attendant System Login

See Attendant Busy-Out (Station), page 54. The attendant has Terminal access to some system programming functions from the attendant console. To access these programming functions, the attendant must log on. Attendant Tone Signaling lets the attendant send tones over the circuit once a call has been established. Attendant Trunk Busy Status Display lets you display and/or print the busy status of the system trunk groups from the attendant console. Auto-Answer lets you automatically answer calls that ring your Prime line. Auto-Hold lets you automatically place an active call on Hold when you press a line key to originate or receive another call. Automatic Route Selection (ARS) simplifies local and long distance dialing by automatically selecting the most convenient and cost-effective route and by inserting and/or deleting the proper routing digits. See Groups - Key System and Multicall, page 60. Brokers Call lets you temporarily suspend a telephone call while you originate a new call. Once the new call has been established, you can alternate between the two calls. Busy Dial Through lets you dial a Feature Access code sequence when a busy condition is encountered. See Callback, page 57, and Camp-on, page 58. See Override, page 62. Calculator lets you use your telephone as a basic four function calculator by using the telephone keypad, display, and softkeys. See Flash - Calibrated, page 60. Page 3 of 13

Attendant Tone Signaling Attendant Trunk Group Busy Status Auto-Answer Auto-Hold Automatic Route Selection (ARS) Broadcast Groups Brokers Call

Busy Dial Through

Busy Override Calculator Calibrated Flash

56

Features

Standard Features (continued) Feature Name Description Call Announce lets you make an announcement to a busy party. The busy party automatically answers the call Handsfree. Callback lets you request that the system notify you when a busy line becomes idle or when an unanswered station goes off-hook and on-hook. Callback - System Programmable lets you program the destination of a matured callback set against a key line or multicall line group. See Phonebook, page 62. Call Coverage is provided through a combination of features: Call Rerouting, Call Forward, Do Not Disturb, and ANSWER PLUS - Mitel Call Distribution. Call Duration Control allows a maximum time limit to be set on telephone calls. Call Duration Display provides you with an indication of the call duration for incoming and outgoing calls. The display is incremented in one minute increments (commencing at 0:00) from the beginning of the call to the end of the call. Call Forward lets you redirect incoming calls to an alternate number. Call Forward - Cancel All lets you cancel all types of Call Forward. Call Forward - Delay provides an opportunity to answer an incoming call before the calling party is forwarded to an alternate answer point. Call Forward - Follow Me - End Chaining ensures that calls are not further redirected. Call Forward - Follow Me - Reroute When Busy forwards the call to the original sets First Alternative Rerouting if the call forward destination is busy. Call Forward - Forced lets you manually redirect an incoming call on your Prime or private line to another number. Call Forward - Override lets you bypass any Call Forward condition that is set at the station that you are calling. See Hold, page 60. Call Park lets the attendant Hold a call so that a telephone user can remotely retrieve the call. Call Pickup lets you answer an incoming call that is ringing at another station. Call Privacy protects a call from audible Call Waiting tones, as the result of a camp-on, and prevents intrusion of any kind (for example, busy override). See Release, page 63. Call Rerouting lets the system redirect calls to alternate answering points or devices under specified conditions. Call Rerouting may be used to redirect calls always (in Day, Night 1, and/or Night 2 mode) or under busy, no answer, or Do Not Disturb conditions. Page 4 of 13

Call Announce Callback Callback - System Programmable Call By Name Call Coverage

Call Duration Control Call Duration Display

Call Forward Call Forward - Cancel All Call Forward - Delay Call Forward - Follow Me - End Chaining Call Forward - Follow Me Reroute When Busy Call Forward - Forced Call Forward - Override Call Hold Call Park Call Pickup Call Privacy Call Release Call Rerouting

57

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description See Conference Split, page 58. See Swap, page 64. See Transfer, page 65. between two calls when a party is trying to call your station or when you have a call on Consultation Hold.

Call Split Call Swap Call Transfer

Call Waiting - Swap Automatic Call Waiting - Swap Automatic lets you use the switch hook to alternate

Camp-on (Call Waiting)

Camp-on, or Call Waiting, lets you notify a busy party that you are waiting. An attendant may also put a call through to a busy station to indicate they are waiting. Upon hearing the Call Waiting tone, the busy party can either respond or finish the current call. Camp-on Tone Security prevents you from hearing the Camp-on or Call Waiting tone. If any party in a call has this option enabled, no Camp-on tone is returned to anyone in the call. See Attendant CAS Interface, page 55. Class of Restriction (COR) limits a stations access to specified numbers. A station may have three CORs (Day/Night1/Night2 service), and the COR may also be changed by using a Verified Account Code. Class of Service (COS) defines a stations feature and timer options. A station may have three COSs (Day/Night1/Night2 service), and the COS may also be changed by using a Verified Account Code. Clear All Features lets you cancel most of the features activated on your extension or another users extension. Conference lets you connect three or more people into a single telephone conversation. While you are in a Conference, you can use any of the features that would normally be available during a two-party call. Conference Split lets you separate a 3-party conference so that you can speak privately with one of the parties. While you are speaking privately with one party, the other party is on Consultation Hold. Data Applications include many data features, which provide data-switching facilities for local and remote data terminals, and/or computers. The date and time may be set from any attendant console. This data appears on all Station Message Detail Recording (SMDR), traffic measurements, data dumps, SUPERSET display telephones, and attendant consoles. See Night Service, page 62. The system can accept or generate rotary dial pulses. The system automatically detects which type of signaling is used by an individual station when a call is dialed. It will automatically outpulse rotary dial or DTMF signals according to the requirements of the particular interconnection. Page 5 of 13

Camp-on Tone Security

Centralized Attendant Service (CAS) Interface Class of Restriction

Class of Service

Clear All Features Conference

Conference Split

Data Applications Date and Time

Day/Night Service Control Dial Pulse Signaling

58

Features

Standard Features (continued) Feature Name Description You will normally hear continuous dial tone when you lift the handset. You will hear discriminating dial tone (also called interrupted dial tone) or transfer dial tone under certain conditions. The system can provide a pseudo-CO dial tone to prevent possible confusion to station users. Dialed Number Editing lets you edit numbers during dialing. The system can differentiate between conflicting numbers such as 1-0-0-0-0 and 1-0-0-0. In this example, if the 5th digit is not dialed within a time-out period, the system assumes that the dialed sequence is complete and makes the call. Direct-In Lines (DIL) allow incoming trunks to be assigned to a specific station or hunt group so that calls from the trunk ring the station or hunt group directly. Direct Inward Dialing (DID) allows incoming calls on designated trunks to directly access predefined stations (or other answering points) on the system. Direct Inward Dialing (DID) - Germany allows incoming calls on designated trunks to directly access predefined stations (or other answering points) on the system. For the German requirements, this feature provides specific DID call processing functionality. The DID/3 protocol test is a test of protocol operation. This test lets the PTT access an incoming DID/3 trunk, have the DID/3 trunk answered within a specific answer time, and monitor the signals while being connected to silence within the system. Direct Inward System Access (DISA) lets external callers access the system by using a special trunk. The system sees the DISA trunk as a station with its own Class of Service and Class of Restriction. Calls that enter the system on DISA trunks have access to a variety of system features. In all cases, the DISA trunk can be assigned account codes to provide a high degree of security or additional options. Direct Outward Dialing (DOD) lets you make external calls without the assistance of the attendant. Direct Page allows you to page another telephone over its built-in speaker. See Off-Hook Voice Announce, page 62.

Dial Tone

Dial Tone - Outgoing Calls Dialed Number Editing Dialing - Conflicting Numbers

Direct-In Lines (DIL)

Direct Inward Dialing (DID)

Direct Inward Dialing (DID) Germany

Direct Inward Dialing/3 (DID/3) Protocol Test

Direct Inward System Access (DISA)

Direct Outward Dialing (DOD) Direct Page Display Contrast Control Do Not Disturb

Display Contrast Control lets you adjust the contrast of the alphanumeric display. Do Not Disturb (DND) lets you place your set in an apparent busy condition without affecting the outgoing functionality. If someone calls your set while DND is activated, he or she will hear a special busy tone. DPNSS Call Diversion offers users, who are absent or busy, the capability of having their calls forwarded to a third party. DTMF Keypad Support lets ONS/OPS extensions use all 16 keys on a 4x4 DTMF keypad. The additional row of four keys (ABCD) is used to access features in the system. Page 6 of 13

DPNSS Call Diversion DTMF Keypad Support

59

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description See Tone-To-Pulse Conversion, page 65. Feature Keys let you activate features without dialing Feature Access codes. Calibrated Flash provides an alternative method of generating a Switchhook Flash. Switchhook Flash lets you place a call on Consultation Hold and return to dial tone so that you can invoke station features. Trunk Flash lets you single or double flash a trunk in order to access Centrex features. Flexible Answer Point lets station and console users program a night answer point for their incoming trunk calls. A Ground Button (Recall Button) lets you place a call on Consultation Hold and return to dial tone so that you can invoke station features. The Ground Button provides an alternative method of producing a Switchhook Flash. Group Page lets you page a group of telephones over their built-in speakers. Key System Groups and Multicall Groups let multiple telephones share the same extension number. Incoming calls ring all of the idle stations, and the stations stop ringing when one member answer the call. Handset Receiver Volume Control lets you adjust the volume of the handset receiver. Handsfree Operation lets you use your telephone without lifting the handset. Headset Operation lets you use a Headset to make and receive telephone calls. Hold lets you temporarily suspend a telephone call. While the call is on Hold, you can use the other telephone features. The call can be either retrieved at the originating telephone or another telephone. Hotline limits your access to a designated answer point. The system automatically dials the answer point when you go off-hook. The designated answer point can be another station, an attendant, a trunk, or a hunt group. Hunt Groups let you dial a pilot number and have the call completed to the first idle station in a group of stations. Any station within a Hunt Group may be accessed directly by dialing the station number. Intercept Handling lets the system control what happens to a call when the call cannot be completed to the required destination. A call may be routed to a tone or to a directory number. Two alternate destinations may be programmed for each condition. Page 7 of 13

DTMF To Rotary Dial Conversion Feature Keys Flash - Calibrated Flash - Switchhook Flash - Trunk Flexible Answer Point Ground Button

Group Page Groups - Key System and Multicall Handset Receiver Volume Control Handsfree Operation Headset Operation Hold

Hotline

Hunt Groups

Intercept Handling

60

Features

Standard Features (continued) Feature Name Description Each peripheral device is assigned an Interconnect Number that is used to restrict one device from connecting with another. Interconnect Restrictions can be used to restrict access to certain trunks, stations, or equipment (i.e. data communications equipment). The restriction is also a function of the direction of the call. See Groups - Key System and Multicall, page 60. Language Change lets you change the language of the telephone softkeys and prompts to any one of the following languages: English, French, Italian, German, LA Spanish (Latin America), EU Spanish (European), Dutch, BR Portuguese, PT Portuguese, or Romanian. Note: The SUPERCONSOLE 2000 allows for English or French only. Line appearance keys are single or shared lines that appear on the SUPERSET telephone programmable keys. There are three types of lines: Prime, Non-Prime, and No Where Prime. Each line appearances can be programmed to ring in a different manner. The SX-2000 system provides extensive maintenance coverage. All types of peripheral hardware are periodically tested by the system. Maintenance users may also test individual circuits on demand. Meet Me Answer lets paged parties respond to a Group Page even if they do not know the identity or location of the paging party. Messaging - Advisory lets you select a short advisory message to show display set users who call your telephone. Callback Messaging lets you leave a callback message on a telephone when the called party is busy or does not answer. When you receive a callback message, you can review the message on the display (if applicable) and/or call the sender back. Dialed Messaging lets you leave a message waiting indication on a telephone. When you receive a message waiting indication, you call your message taker to accept the message. Mixed Station Dialing lets you use both rotary dial and DTMF telephones within the system and on the same line. See Groups - Key System and Multicall, page 60. See Attendant Consoles (Multiple), page 55. Music lets you listen to the Music On Hold music source through the speaker of the telephone. Music On Hold provides callers with music while they are waiting for a call to be completed. Music On Hold is provided when a call is on Hold, when a call is transferred to a busy party, or is in Call Waiting. The music source is provided by the customer. The SX-2000 system supports both analog and digital networking. See Node ID Recognition, page 62, and Uniform Numbering Plan, page 65. Page 8 of 13

Interconnect Restrictions

Key System Groups Language Change

Line Types and Appearances

Line Appearance Ring Types Maintenance

Meet Me Answer Messaging - Advisory Messaging - Callback

Messaging - Dialed

Mixed Station Dialing Multicall Groups Multiple Consoles Music Music On Hold

Networking

61

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description NI3 Calling Name Delivery allows the called party to see the name of the caller on the telephone display screen if the caller has programmed Calling Name to "Allow" through IMAT. The NI3 feature supports both incoming and outgoing calls for the PRI card and Universal NSU, page 31. Night Service lets you redirect calls to alternate answer points for individual trunks. The answer point used depends on the selected mode of operation (Day, Night 1, or Night 2). Automatic Night Service places the system into Night service automatically if all attendant consoles are unable to receive calls or if all attendant consoles are inactive and the time-out period has expired. Node ID Recognition lets a system in a network determine if an incoming call applies to it or to another system in the network. Non-Busy Station lets you program an extension never to return busy tone. This feature is used for special situations (e.g., as emergency stations). Non-DID Extension allows the system to support sets that are not directly accessible to DID trunks. These calls are transferred to Non-DID Extensions by an Intercept Handling point (such as an attendant or a station). Off-Hook Voice Announce lets you receive a Direct Page during a handset or headset call. See Direct Page, page 59. Overlap Outpulsing reduces post-dialing delay when trunk calls are originated. Once a route has been determined by ARS, a trunk is seized and dial pulses or tones are outpulsed to the CO. These outpulses are sent before the user has finished dialing to allow faster call setup on analog trunks. Override lets you enter a conversation at a busy station or ring a station with Do Not Disturb activated. Before you enter the conversation, all parties receive a warning tone. Override Security prevents users from using Override on your station. Paging lets you connect to loudspeaker/paging equipment to access individual paging zones or all paging zones simultaneously. Before you are connected to the paging equipment, you will hear a two-second burst of tone. Phonebook lets you locate and telephone a system user based on his or her name, extension number, department, and/or location. The SX-2000 system has complete RS-232 printer flexibility. Any printer port may be programmed for any application. The system supports both system printers for its own applications (such as SMDR and maintenance) and dedicated data communications printers. Priority Queuing ensures that calls are handled in order of priority. When internal or external callers must wait for calls to be completed, they are placed into a queue and assigned an access priority. Page 9 of 13

NI3 Calling Name Delivery

Night Service

Night Service - Automatic

Node ID Recognition Non-Busy Station Non-DID Extension

Off-Hook Voice Announce Overlap Outpulsing

Override

Override Security Paging

Phonebook Printer Support

Priority Queuing

62

Features

Standard Features (continued) Feature Name Description Privacy between users who share line appearances in key systems groups is automatic. The privacy release feature allows users to release privacy during a call to allow another member of the key system group to intrude on the call. Pulse-To-Tone Conversion automatically converts rotary dial pulses from stations, lines, and trunks to DTMF tones on outgoing trunks that have been programmed as DTMF trunks. Recall lets an incoming caller, who has been transferred to an idle station and not answered within a specified time-out period, call back the last party who handled the call. Similar time-out Recalls occur for parties who were transferred to busy stations or who were placed on Hold. See Ground Button, page 60. Redial lets you automatically dial the last number that you manually dialed. Redial - Saved Number lets you save a number for future dialing. The number remains saved until a replacement number is saved. Release lets you release from an attempted call transfer or conference call without going on-hook. Release is useful when you encounter a busy or unavailable external party. Reminder lets you program your set to ring and provide a message at a specified time within the 24-hour period. Ringer Control lets you adjust the volume and pitch of the telephone ringer. Discriminating Ringing lets you distinguish between incoming internal calls, incoming trunk calls, tie line calls, and Callbacks by using different ringing patterns (cadences). Optional Discriminating Ringing lets you change the Discriminating Ringing patterns on ONS/OPS lines so that you hear internal ringing (1 second on and 3 seconds off) for both internal and external calls. Ringing Line Select lets you answer any ringing line by going off-hook. See Pulse-To-Tone Conversion, page 63. Simple Network Management Protocol (SNMP) governs the management and monitoring of network devices and their functions. Speaker Volume Control lets you adjust the volume of the telephone speaker. Speed Call Keys let you store and dial frequently-used numbers by using the personal keys on your telephone. When the system encounters a Pause while dialing a Speed Call string, the system ceases dialing for the duration of the Pause. When the Pause ends, dialing resumes. Personal Speed Calls let you store and dial frequently-used numbers by using access codes and index numbers. Page 10 of 13

Privacy Release

Pulse-To-Tone Conversion

Recall

Recall Button Redial Redial - Saved Number Release

Reminder Ringer Control Ringing - Discriminating

Ringing - Discriminating (Optional) Ringing Line Select Rotary Dial to DTMF Conversion SNMP Agent Speaker Volume Control Speed Call Keys Speed Call - Pause

Speed Call - Personal

63

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description System Speed Call lets you dial stored system numbers. See Speed Call (above). Station Message Detailed Accounting (SMDA) lets the system accumulate meter pulses (up to an assigned buffer size) that can be read, printed, and cleared from a console. You can collect meter pulses by using either a device (device meter unit accumulation) or an account code (account code meter unit accumulation). Station-To-Station Dialing lets you dial any other station directly. Suite Service is provided by Pickup Groups (set Auto Answer On to "Yes"). The SUPERSET Loop Test lets you verify the operation of the telephone keys and displays and the integrity of the data path to the switch. The tests are performed from the set (normally after initial system installation). Swap lets you temporarily suspend a telephone call while you originate a new call. Once the new call has been established, you can alternate between the two calls. See Flash - Switchhook, page 60. Administrative access to the SX-2000 system is controlled by passwords. Different passwords are assigned for each of the five levels of access. See Alarms and Attendant Console Status Display, page 55. The SFT maintains telephone service in the event of system failure (such as a power outage). Trunk circuits originating from one CO or system and terminating on another can be transparently interconnected (tandem trunking) without attendant intervention. Any extension number in the system telephone directory can be designated as private. When an extension number is private, the number is not displayed on other users telephones. Tie trunks terminate on the attendant console, at station sets, in hunt groups, or on night bells. They may also be arranged as dial-in tie trunks or tandem trunks. Like CO trunks, tie trunks are arranged in groups. See Reminder, page 63. Toll control allows or denies access to specified routes, CO exchanges, and directory numbers. Tone Demonstration lets you hear the tones provided on the SX-2000 system. The SX-2000 system can detect and analyze call progress tones that originate from the central office during the course of a trunk call. Call progress and supervisory tones generated within the system are programmed to meet the requirements of the telephone authorities of the country in which the SX-2000 system is installed. Page 11 of 13

Speed Call - System Speed Dial Station Message Detailed Accounting (SMDA)

Station-To-Station Dialing Suite Service SUPERSET Loop Test

Swap

Switchhook Flash System Access Authorization System Alarm Indications System Fail Transfer Tandem Trunking

Telephone Directory - Privacy Option Tie Trunk Support

Timed Reminder Toll Control Tone Demonstration Tone Detection Tone Plan Flexibility

64

Features

Standard Features (continued) Feature Name Description Tone-To-Pulse Conversion automatically converts DTMF tones from stations, lines, and trunks to rotary dial pulses on outgoing trunks that have been programmed as rotary dial trunks. Transfer lets you move a call from one telephone to another. Before completing a Transfer, you can consult privately with the third party and swap between private conversations with each of the parties. Transmission Tests let you perform the following tests on a trunk: milliwatt test, balance test, and 100 test. Trunk Access lets you access a specific trunk directly. No toll control or ARS checking is done when you use Trunk Access. This feature is used when a maintenance telephone is required. Trunk Answer From Any Station (TAFAS) lets you answer any call that rings a night bell. Once you answer the call, you can use any of the features that are normally available at the station. Trunk Busy-Out lets you busy-out a specific trunk. When you perform a Trunk Busy-Out, the trunk is busied out if it is idle; if the trunk is in use, it is busied out as soon as it becomes idle. When you busy-out the trunk, it cannot be accessed. Trunk Group Hunting lets you search for trunk groups in either a terminal or circular pattern. In a terminal hunt group, trunks are always selected in a predetermined order. In a circular hunt group, trunks are selected in a distributed manner (the first free trunk after the last one used becomes the new first choice). Trunk Labels may be assigned to individual trunks or groups of trunks. When a trunk call appears at an attendant console, the trunk label and trunk number are displayed. Direct Trunk Select lets you access an outside trunk for the purposes of originating and receiving external calls. Because the trunk is assigned to a line appearance, you can access the trunk to make or answer calls without the need for trunk access codes. The SX-2000 system supports most public network trunk types (both analog and digital). The SX-2000 system supports the use of a network Uniform Numbering Plan that allows you to use the same digits to reach a station from any location in the network. Common Peripheral Interface ports allow the system to be very flexible and accommodate various different system configurations. Page 12 of 13

Tone-To-Pulse Conversion

Transfer

Transmission Tests Trunk Access

Trunk Answer From Any Station (TAFAS) Trunk Busy-Out

Trunk Group Hunting

Trunk Labels

Trunk Select - Direct

Trunk Support Uniform Numbering Plan

Universal Port Orientation

65

SX-2000 General Information Guide

Standard Features (continued) Feature Name Description Most voice processing systems work in conjunction with the SX-2000 system. The system provides the following voice processor interfaces: Voice Mail - COV Interface Voice Mail - Digital E&M Interface Voice Mail - E&M Interface Voice Mail - ONS Interface. The SX-2000 system will typically use MSDN or MSAN facilities to network other SX-2000 systems. Various types of tie trunks are also used to link systems; however, they offer less functionality between sites. These facilities can be configured to provide voice mail functionality from a centralized voice processor. For more information, see the Voice mail Centralized E&M Interface section of the Technical Documentation CD-ROM. Page 13 of 13

Voice Mail

Optional Features
The following table lists the optional features available on the SX-2000 system. Optional Features
Feature Name Description The ACD 2000 feature package lets you program a maximum of 64 agent groups with up to 150 agents in each group. By using the ACD 2000 Extended Agent Groups feature package, you can assign up to 500 agents to each group; however, the maximum number of agent groups is reduced to 32. are routed to the most skilled available agent. If agents of equal skill are available, the call is routed to the longest-idle agent. To facilitate skill-based routing, agent IDs can appear in more than one agent group.

ACD 2000 Extended Agent Groups

ACD 2000 Skill-Based Routing Each agent in an agent group is assigned a skill level. Calls to the group

ACD Real Time Event

Advanced Analog Networking

Makes the ACD Real Time Event stream a purchasable option. Provides calling line identification and travelling class marks across analog trunks. Allows day and time zones, route plans, and ARS assignment to be programmed. Enables data transceiver functionality for access to all of the DTRX features. Automatic Number Identification and Dialed Number Identification Service identify numbers that are transmitted on an incoming trunk. Allows an external system environment caller to dial through to an extension without having to go through an attendant. Page 1 of 6

Advanced ARS Advanced Data ANI/DNIS/ISDN Number Delivery ANSWER PLUS

Automatic Attendant

66

Features

Optional Features (continued)

Feature Name Description Provides the following features: - Silent monitoring - Agent help - Agent log on and log out - Modified DND for ACD agents - Longest idle agent queuing - Real time event records - Work timer - Programmable threshold alert - RAD groups. Consists of four main components: call distribution, agent mobility, management and reporting, feature configuration and administration. Each of these components offers many features not available with ANSWER PLUS - Automatic Call Distribution. Permits the use of Recorded Announcement Devices (RADs) and a uniform call distribution to hunt groups. Enables attendant to choose language of operation for the attendant console (English, French, German, or Italian). See ONS CLASS/CLIP Station Side Software Support, page 70. Allows you to program SUPERSET 4 telephones as well as voice mail applications that require a COV interface. Allows basic calls to be made from the SX-2000 system to a DASS II protocol Central Office, using CEPT Digital Trunks and DASS II signaling. Allows you to program Mitel digital network devices including SUPERSET telephones, attendant consoles, and datasets. A Busy Lamp Field (BLF) allows the status of a directory number to appear on the line status indicator of a SUPERSET or Programmable Key Module. The monitored device may be on the same system or another system within the same cluster. The key associated with the busy lamp acts as a Direct Station Selection (DSS) key. Enables Emergency Services support so when an Emergency Services number is dialed, a Customer Emergency Services ID (CESID) is sent from the system to the Public Safety Answering Point (PSAP). The CESID is used as a key in the Automatic Location Information (ALI) database to retrieve information indicating the precise location of the caller. Page 2 of 6

ANSWER PLUS
Automatic Call Distribution I

ANSWER PLUS
Automatic Call Distribution II (ACD 2000)

ANSWER PLUS
Mitel Call Distribution

Attendant Language Selection

CLASS/CLIP Station Side Software Support COV

DASS II Voice I DNI Direct Station Select/Busy Lamp Field (DSS/BLF)

Emergency Services

67

SX-2000 General Information Guide

Optional Features (continued)

Feature Name Description Selected features are grouped together under purchasable levels (they cannot be purchased separately). Feature Level 1 content has been part of the base software load since LIGHTWARE 31 Release 1.0: Networked Group Page Hold on Hold (internal and networked) Call Forward - Delay ACD Make Busy Reason Codes Telephone Usage Restriction (Curfew Control) Call Duration Control Feature Level 2 content has been part of the base software load since LIGHTWARE 32 Release 1.0: DNIC RAD Multiple Message Waiting Indications Remote Wake-up Calls Hotel/Motel Multiple Wake-up Support SMDR Extended Reporting Level 1

Feature Level Optioning

Feature Level Optioning (contd) Feature Level 3 content has been part of the base software load since
LIGHTWARE 32 Release 1.0: Report Attendant Name Simplified Account Codes Maintain Calling Line ID Dial out of an ACD Queue Call Clearing on LS/GS Trunks Interconnect Restriction Override Headset Mute Switch Emergency Call Notification on Display Sets Hotel/Motel Multiple Wake-up Support on Consoles SMDR Path Reporting for Internal ACD2 Calls ACD Hold Retrieve/Abandon Event Shared Telephone Service for a Single Suite Disabled Account Code Reporting for Internal SMDR Tag Call (malicious call trace) Feature Level 4 includes:

Disable Wakeup on Check-Out Hold Key Retrieves Last Held Call Tenanting
Flexible Dimensioning Allocates database memory to each feature resource. The amount of memory determines the maximum size of the feature resource; the system borrows memory from other resources that are not in use. Allows monitoring of the activity and state transitions of extensions. Permits a host computer application to initiate and clear calls on behalf of an extension on the SX-2000 system through X.409, X.410, and X.25 protocols. Provides features commonly used by hotels, motels, hospitals, and Property Management Systems. Provides simulation of analog signaling over CEPT digital trunk facilities. Page 3 of 6

HCI/CTI Advanced Telephony HCI/CTI Basic Telephony

Hotel/Motel Italian CAS

68

Features

Optional Features (continued)

Feature Name Description Duplicates the main control hardware of the SX-2000 system so that the system can remain operational if one of the Main Control complexes fails. An automated messaging service. Supports telephone directory management within the OPS Manager, page 14, application. Supports the following OPS Manager, page 14, functionality: automated software upgrades, scheduled automatic database backups, and automatic data saves and data restores. Supports the following OPS Manager, page 14, functionality: network moves, adds, and changes, single network system support, and moves, adds, and changes templates. Supports alarm management within the OPS Manager, page 14, application, including the following features: viewing network alarms, alarm paging, demand paging, and history reports. Provides call set-up capabilities between systems connected in an MSAN/APNSS network. Provides data calls over digital network links, fast data call setup, and nailed-up data calls through MSDN/DPNSS links. Allows or denies access to the public network, preventing users from bypassing the toll network and ensuring a trunk entering a private network cannot re-enter the public network. Allows a call which is awaiting connection or reconnection to an extension to be redirected by the terminating system in an SX-2000 network. Provides the following features: - 2.048 or 1.544 Mb/s digital multiplexed interface - Fast call setup for voice - 3-party and multi-party conferences - Camp-on (call waiting) - Transfer to busy - Hold, swap capabilities - Supervised/unsupervised transfer - No access to public network via private network - All analog trunks functionality - Network voice mail functionality. Provides the following features: - Callback - Override across a network. Displays calling partys name, trunk labels, and SUPERSET display telephone status messages across a network. Provides some network voice mail functionality. Provides Serial Call, Call Split, Route Optimization, and three-party conferencing across digital links. Provides Stepback and Network SMDR features to operate on nodes of an SX-2000 digital network. Provides some network voice mail functionality. Page 4 of 6

Main Control Redundancy Message Center MNMS Configuration Management I MNMS Configuration Management III MNMS Database Access

MNMS/SNMP Fault Management I MSAN/APNSS

MSDN/DPNSS Data

MSDN/DPNSS Public Network Access MSDN/DPNSS Redirection MSDN/DPNSS Voice I

MSDN/DPNSS Voice II

MSDN/DPNSS Voice III

MSDN/DPNSS Voice IV MSDN/DPNSS Voice V

69

SX-2000 General Information Guide

Optional Features (continued)

Feature Name Description Provides the Portable Directory Number feature for OPS Manager, page 14. Permits the attendant to reroute calls between systems without consuming additional trunk resources. Connects the SX-2000 system with the Defense Switched Network (DSN), which enables users to specify a precedence level when making a call and to preempt lower priority calls. Networked ACD supports ACD functions over a Mitel Switched Digital Network (MSDN). Agent groups at different locations (on different systems) may service calls on the network independently of where the call first entered the network.

MSDN/DPNSS Voice VI
MSDN Release Link Trunks Multi-Level Precedence and Preemption (MLPP)

Networked ACD

ONS CLASS/CLIP Station Side Allows ONS CLASS/CLIP sets using CLASS/CLIP protocol to receive Software Support Caller Line Identification Delivery (CLID) information, and the time and date
of a call. Peripheral Node Expansion Allows the peripheral node capacity to be expanded to 384 ports, controlling up to 24 Peripheral Interface cards. Describes the purchasable options supported by the PRI card and Universal NSU, page 31. These options include Min/Max, Automated Min/Max, NFAS (Non-Facilities Associated Signaling), D-channel Backup and Remote LAN Access. A protocol that allows you to connect a minimum of two systems together to form a private network. QSIG supports both incoming and outgoing calls for the PRI card and Universal NSU, page 31. Collects data for outgoing and incoming trunk calls. Collects data for calls made between stations within the system. Provides quick and easy access to the Mitel 6500 Speech-Enabled Applications. Provides the ability to group a number of telephone lines through interconnected hotel/motel rooms, or suites, for the purposes of billing and shared telephone service. Allows you to change the screen background color and alarm display color on a SUPERSET 700 attendant console. Provides support for T1 Channel Associated Signaling. The DS1 Formatter card is required. Supports MiTAI and TALK TO TAPI computer telephony interfaces. Provides traffic reports based on system usage to allow better system resource management. Enables attendants to query the status of trunk groups from the attendant console.

PRI

QSIG

SMDR - External SMDR - Internal Speak@Ease Softkey Support Suite Services

SUPERSET 700 Color

T1/D4 TAPI Support Traffic Reporting Trunk Group Busy Status

Visually Handicapped Operator Enables blind attendants to operate a SUPERSET 700 attendant console Console by having information announced in the receiver.
Page 5 of 6

70

Features

Optional Features (continued)

Feature Name Description Provides the SUPERSET user with a quick and convenient method to access NuPoint Messenger. Access to the system is provided through context sensitive softkeys presented on the SUPERSET. Proprietary switched MSDN/DPNSS networking over the PSTN. Page 6 of 6

Voice Mail Softkeys

XNET

71

SX-2000 General Information Guide

Security
Toll Control
Comprehensive toll control is an integral part of the Advanced Automatic Route Selection feature package. It allows the customer to restrict user access to trunk routes and/or specific external directory numbers. The key to toll control is the use of Class of Restriction (COR) values. All systems with any combination of Direct Inward System Access (DISA), integrated auto attendant, or RAD groups and peripheral interfaced auto attendant or voice mail are susceptible to being "hacked into" by external callers. In addition, internal users could abuse telephone privileges by using external call forward, trunk-to-trunk connection without third party, or 1-800 and 1-900 numbers. It is very important to assign telephone privileges that relate to toll only to the employees who require it to do their job. In addition, a lobby telephone would be denied toll access unless authorized through an attendant. Class of Service options, such as Individual Trunk Access, bypass all ARS and COR restrictions. Features carrying a risk of toll abuse include: Public Network to Public Network Connection Allowed permitting trunks to be connected together without a third party Call Forwarding External Destination feature allowing an extension user to forward calls to external trunks 800 numbers, usually free calls, but some central offices can allow the reversal of 800 charges, making it a toll call for your company 900 numbers, should be restricted from all users except those who require it for their job function.

Another method of toll control is Station Message Detailed Recording (SMDR) which can be used to track internal users and control their calls. Tracking is a deterrent to toll abuse by internal callers; however, these records may also be used to identify account codes. For more information on suppressing private strings from records, see the Digit Modification Assignment section of the Technical Documentation CD-ROM.

Authorized Maintenance Access

Authorized maintenance access provides protection (restricted access) for various administration commands from unauthorized users. The six levels of authorization are: System Installer Maintenance2 Maintenance1 Supervisor Attendant.

72

Security

These levels provide a means of differentiating the capabilities of the various types of users who administer the system. Newly installed systems include four default user accounts (SYSTEM, INSTALLER, MAINTENANCE1, and MAINTENANCE2), which should be programmed with unique, secure usernames and passwords before being used to access the system. Additional new user accounts (64 in total) can be programmed using CDE procedures. Passwords can be changed by their owners or by the system-level user. Usernames can be changed by administrators with higher authorization levels (for example, a Supervisor can change an Attendants username but not an Installers username). All systems with modems connected to the maintenance port should have all levels of passwords and usernames changed from the default value on an irregular schedule. In the Form Access Authorization form there are different levels of access (MAINTENANCE1, MAINTENANCE2, SUPERVISOR, and ATTENDANT). Special attention should be given to these users and only allow access to the required forms. Another area of concern is the User Authorization Profile form. The name and authorization level is accessible from anywhere (i.e., Maintenance Terminal and modems). Therefore, the authorization level should be kept to a minimum to keep "hackers" from accessing certain forms through CDE. Voice mail systems connected directly to modems should employ a surveillance device. Also, most voice mail systems require a password to gain access; therefore, make sure this password is difficult to guess and is changed frequently. Any user no longer authorized to use the system should have password privileges revoked. For more information, see the RESET PASSWORD, RESET USERNAME, and CHANGE PASSWORD sections of the Technical Documentation CD-ROM.

Enhanced Login Security

When Enhanced Login Security (ELS) is enabled, the system enforces tighter control of user identification and login authorization. Security Functions - ELS Enabled/Disabled
Security Function ELS Enabled Yes Accounts are disabled after being inactive 30 - 90 days. Minimum password length is programmable in a range of 6 - 8 characters. No No Minimum password length is programmable in a range of 1 - 8 characters. Page 1 of 2 ELS Disabled

Administrator accounts can be enabled/disabled Account Inactivity Timer Minimum password length

73

SX-2000 General Information Guide

Security Functions - ELS Enabled/Disabled

Security Function Limit to reuse of passwords ELS Enabled System can retain a history of 1 8 "old" passwords and prevent their reuse. System can prevent a password from being changed for 1 - 20 days Default and per-user expiry intervals are programmable. Passwords must contain at least one upper case and one lower case alphabetic character, one numeric character, and one special character. Passwords are case sensitive and cannot contain repeating characters such as "aaa", spaces, or the username. The system raises a security alarm (based on alarm threshold programming), displays a warning message, and prevents the user from logging in. The system displays a warning message and prevents the user from logging in. Multiple sessions are supported. To log in, users must have a higher authorization level than the user who logs in first. The user is prevented from executing commands. A warning message displays. No ELS Disabled

Password change waiting period

No

Password expiry interval Strict password content

Default expiry interval is programmable. Passwords are case sensitive and cannot contain spaces.

System response to use of default username or password

The system raises a security alarm, displays a warning message, and allows the user to log in. The system displays a warning message but allows the user to log in. Multiple sessions are supported. All users can log in, and are assigned the same authorization level as the user who logs in first. The user can traverse the command graph but is prevented from executing complete commands. Yes Yes

System response to use of expired password Support for multiple maintenance sessions (maximum four telnet and one RS-232) System response to maintenance commands entered by a user who is not logged in

Security-related events recorded to Yes a separate log file

Telnet and consoles are locked out when failed locked attempts threshold passed Yes

Page 2 of 2

Mitel Options Password

New Mitel Options Passwords (MOP) are not required for software stream upgrades from LIGHTWARE 30 Release 2.0 to further streams, when no new purchasable software options are enabled on the system. If new software options are purchased, a new MOP is always required.

74

Maintenance

Maintenance
Reliability
All specifications in this section assume that the SX-2000 system is operating within its specified environmental limits. No reliability performance can be defined outside those limits. Some degradation of the quoted failure rates can be expected when a system operates at the extremes of the environmental specification, page 79. MILITARY HANDBOOK 217D has been used for failure rate calculations. Degradation from the nominal failure rates is approximately double the calculated failure rate for every 18F (10C) rise above the external room ambient of 68F (20C). Early life effect is defined as the first six months after installation, where hardware reliability performance is affected by the components infant mortality and production quality defects. After the early life period, the average number of maintenance actions do not exceed 0.200 per 100 stations per month. Early life effects are determined in terms of hardware early life effect and system early life effect. Hardware: The early life effect for hardware failure is less than twice the useful life failure rate averaged over the first six months of operation. This is equivalent to 0.40 failures/100 stations/month. This does not include Dead On Arrivals or No Faults Found. System: The system outages or downtimes are also affected during the early life period. This affects all newly installed systems and is greater than three times that specified as the nominal. This is averaged over the first six months after installation, and does not exceed 0.90 failures/100 stations/month.

Program Load Times: The time required to reload the subsystems of the SX-2000 system does not exceed 10 minutes. The time required from attendant console power-on to being able to process simple calls is less than 5 minutes, not including cold system start-up time.

Maintenance and Service

General
Service documentation is structured so that personnel with varying levels of experience or technical knowledge can easily locate and understand the desired information. The documentation is targeted at technically qualified service personnel. All system-detected errors (both software and hardware) are automatically entered in an Error Log which is maintained in non-volatile storage. All pertinent information necessary to uniquely identify the elements associated with the error is logged in the file or pointers are provided to identify its location in storage. Maintenance activity can be performed concurrently, with no perceived impact on user operations, except for those resources required to correct the malfunction.

75

SX-2000 General Information Guide

Hardware
Hardware units are easily removed and replaced. Note: Defective items should be repaired by an Authorized Repair Center (not by field personnel). The FRUs (power supply, cards, converters, etc.) are easy to change, easily accessible for service, and their locations are readily identified FRUs within the hardware unit can be easily plugged into place and require no soldering to facilitate their replacement Doors can be removed quickly and require no critical alignment or special tools to re-install Cables which connect the FRUs use connectors which can be easily detached, securely fastened, and readily identified Software/firmware visibility is provided for the use of service and support personnel.

Software
The software provides a means to readily identify software modules and their modification level a means to readily identify the software release level a software fix (patches or modules) procedure that allows easy application (either locally or remotely) captured software diagnostic data (error logs/data, dumps, traces, etc.) which can be easily retrieved (either locally or remotely).

Printer Support
You can print a file from anywhere in the system. There is a separate print queue for each printer in the main controller mass storage system. Any console or Maintenance Terminal user may print a file on any printer in the system. After a requested file is printed the system displays a message for the user.

Diagnostics
The system performs four types of on-line and off-line diagnostic check to ensure that all aspects of the system are functioning properly. Faulty units are removed from service. Tests include the following: Power-up Warm start Background Directed.

76

Maintenance

Alarms
An alarm is an event that takes place when an anomaly is detected and corrective action is required. Alarm Classes: There are three classes of alarms: CRITICAL, MAJOR, and MINOR. Alarm threshold levels are programmable. Critical: A critical alarm is a total loss of service which demands immediate attention. A critical alarm invokes system fail transfer. Major: A major alarm is a fault which affects service to many users. This usually results in a major degradation in service and needs attention to minimize customer complaints. Minor: A minor alarm is any fault which does not fall in either of the above two classes. Whenever the system is not 100% operational a minor alarm is raised. This normally requires the attention of a repair person but is not urgent. Examples of a minor alarm include the loss of a single line or trunk circuit or the loss of one circuit switch link.

Alarm Routing: All attendants are alerted when an alarm is raised. To determine the alarm status, log on to the Maintenance Terminal and enter the ALARMS command. An alarm condition is CLEARED when the fault or condition which caused it is corrected, or the threshold is reprogrammed outside of that which caused the alarm. Remote Alarms: Each class of alarm has a set of contacts to activate external audible or visual indicators or for use as control points for remote surveillance systems, data loggers, etc.

Controls and Indicators

The SX-2000 system attempts to detect, isolate, and recover from a fault before the fault condition affects the user. The system also isolates a fault down to the smallest field-replaceable module. The SX-2000 LIGHT Control Panel is located in the control cabinet, above the card slots. The panel provides faceplate push button switches and LED indicators for system reset (Planes A and B) activity switch activity freeze enable/disable alarm indicators (critical, major, and minor) remote alarms enable/disable panel enable/disable.

Circuit Card Indicators

All Printed Circuit Board (PCB) cards in the system have a series of LED indicators and/or numeric displays mounted on their front panels. For maintenance instructions, see the Circuit

77

SX-2000 General Information Guide

Card Indicators section of the Technical Documentation CD-ROM. The PCB card LEDs can be grouped into three categories: Card Status LEDs: common to all cards Circuit Status Bar LEDs: found on line, trunk, and DTMF Receiver cards Numeric Displays: found only on processor cards

78

Specifications

Specifications
Environment
System
Storage Environment
Condition Temperature Humidity Vibration (FCC Part 68, Sections 6&7) Mechanical Stress (FCC Part 68, Sections 6&7) Horizontal Transportation Impact Stress Specification -40 to 150F (-40 to 66C) 5-95% Relative Humidity, non-condensing 0.5 g, 5 to 100 Hz, any orthogonal axis 1.5 g, 100 to 500 Hz, any orthogonal axis One 20.3 cm (8 inch) drop, each edge and corner adjacent to the rest face One shock pulse applied on each face perpendicular to the direction of motion of the transporting vehicle; the shock pulse is a half-sine acceleration 30 g peak, 20 ms duration

Operational Environment
Condition Temperature Specification 39 to 120F (4 to 49C) Peripheral cabinet and DSU cabinet 32 to 104F (0 to 40C) SX-2000 Redundant Control cabinet Humidity Maximum Heat Dissipation - fully loaded (see Note) Redundant Control Cabinet Peripheral Cabinet DSU Cabinet Air Flow 386 BTUs per hour 724 BTUs per hour 266 BTUs per hour 150 cubic feet per minute at maximum output of the fans Page 1 of 2 5-95% Relative Humidity, non-condensing

79

SX-2000 General Information Guide

Operational Environment (continued)

Condition Standards and Specifications Specification The Peripheral and DSU Cabinets conform to the following specifications: CFR Title 47, Part 15 ICES-003 EN55022 EN55024 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-11 EN61000-3-2 EN60950 CSA - UL 60950 Note:Conversion factors: 1 watt is equal to 3.412 BTUs per hour, 1 ton of refrigeration is equal to 12,000 BTUs per hour or 3.516 Kilowatts, and 3/4 Kilowatt-hour is equal to 1 ton of refrigeration. Page 2 of 2

Network Services Unit (NSU)

Storage Environment
Condition Temperature Humidity Vibration Mechanical Stress -40 to 150F (-40 to 66C) 15-95% Relative Humidity, non-condensing 0.5 g, 5 to 100 Hz, any orthogonal axis 1.5 g, 100 to 500 Hz, any orthogonal axis One 15.3 cm (6 in.) drop, each edge and corner adjacent to the rest face (unpackaged) One 76.2 cm (30 in.) drop, each edge and corner packaged in cardboard and foam Specification

Operational Environment
Condition Temperature Humidity Maximum Heat Dissipation - fully loaded (see Note) Specification 39 to 120F (4 to 49C) 34-95% Relative Humidity, non-condensing 170 BTUs per hour

Note:Conversion factors: 1 watt is equal to 3.412 BTUs per hour, 1 ton of refrigeration is equal to 12,000 BTUs per hour or 3.516 Kilowatts, and 3/4 Kilowatt-hour is equal to 1 ton of refrigeration.

80

Specifications

Peripherals
SUPERSET 4000 and SUPERSET 400 Telephones Programmable Key Modules (12 and 48) Temperature Operating Environment Shipping/Storage Environment 32 to 122F (0 to 50C) -13 to 158F (-25 to 70C) Humidity 0% to 90% RH, non-condensing 0% to 90% RH, non-condensing

SUPERCONSOLE 1000 Temperature Operating Environment Shipping/Storage Environment 32 to 86F (0 to 30C) -4 to 140F (-20 to 60C) Humidity 20% to 80% RH, non-condensing 10% to 70% RH, non-condensing

Single-line DLM Temperature Operating Environment 32 to 104F (0 to 40C) Humidity 5% to 95% RH, non-condensing

81

SX-2000 General Information Guide

Dimensions and Weights

Component Redundant Control Cabinet Peripheral Cabinet DSU Cabinet NSU (see note) SUPERCONSOLE 1000 Single-line DLM Notes: The Network Services Unit (NSU) is 19" rack mountable. The Peripheral Cabinet (19") can be stacked in a 19" rack; however, it cannot be rack mounted. Because of their narrow width (9"), the DSU cabinet can only be stacked at the top of the pile. Height 19.25 inches (48.9 cm) 19.25 inches (48.9 cm) 19 inches (48.3 cm) 1.75 inches (4.5 cm) 4 inches (10.2 cm) 1.4 inches (3.6 cm) Width 17.25 inches (43.8 cm) 17.25 inches (43.8 cm) 9 inches (22.9 cm) 17.75 inches (45.1 cm) 15.5 inches (39.4 cm) 8.1 inches (20.6 cm) Depth 19 inches (48.3 cm) 19 inches (48.3 cm) 19 inches (48.3 cm) 15.5 inches (39.4 cm) 9 inches (22.9 cm) 10.6 inches (26.9 cm) Weight (fully loaded) 67.4 lbs (30.6 kg) 72.8 lbs (33.0 kg) 31.3 lbs (14.2 kg) 9.4 lbs (4.3 kg) 5 lbs (2.27 kg) 2.6 lbs (1.2 kg)

82

Specifications

Power
System Input Power Requirements Input / Disconnect IEC320-C14 Class 1 AC Input Voltage / Frequency Rating 100-127 Vac 50/60 Hz 50/60 Hz Peripheral Node IEC320-C14 Class 1 AC 102-120 Vac 50/60 Hz 200-240 Vac 50/60 Hz (MP914AD psu) DSU Node IEC320-C14 Class 1 AC 100-127 Vac 50/60 Hz 50/60 Hz switchable NSU IEC320-C14 Class 1 AC Receptacle 100-120 Vac 200-240 Vac 50/60 Hz 20 W (Universal) 30 W (R2) 20 W (BRI - NA) 40 W (BRI - UK) Notes: The typical input power applies to cabinets that use about half of the card slots only. All Peripheral Node numbers assume normal business traffic on the lines. 120 W max 80 W typical (see note) 750 W max 540 W typical (see note) 102-132 Vac 47-63 Hz (MP914AA psu) 187-264 Vac 47-63 Hz (MP914AD psu) 90-132 Vac 47-63 Hz or 187-265 Vac 90-264 Vac 47-63 Hz AC Source Range 90-132 Vac 47-63 Hz 187-264 Vac

Component

Input Power

Redundant SX-2000 LIGHT

200 W

Receptacle Switch 200-240 Vac

Receptacle Switch (MP914AA psu)

Receptacle Switch 200-240 Vac

Equipment AC Control Cabinet, DSU Cabinet, and Peripheral Cabinet For more information, see the AC Power Converter section of the Technical Documentation CD-ROM. DC Control Cabinet, DSU Cabinet, and Peripheral Cabinet For more information, see the DC Power Converter section of the Technical Documentation CD-ROM.

Power Requirements 120 Vac, 6 amps 240 Vac The input power is converted to 5, 12, -27 and -48 Vdc, and 80 Vac ringing voltage by the power converter (AC) -48 Vdc In a DC powered peripheral, the -48 V power is used directly. In a control or DSU node, the input power (AC or DC) is converted to 5 and 12 Vdc and output by the PSU.

83

SX-2000 General Information Guide

Equipment SUPERCONSOLE 1000

Power Requirements The console is powered from the line feed (-48 V). It has an on-board power supply that converts the input voltage to +5, +15 and -8.0 Volts. The on-board power supply draws 27 mA from input supply, + 10% at -48 Volts. The Input voltage range is from 35 to 60 Vdc. 120/240 Vac Dataset receives power from a plug-in transformer which supplies 9 Vac to a power connector on the back of the dataset. Circuitry in the dataset converts this power to the required DC voltages. The digital telephone voice operation receives its power from the system.

SUPERCONSOLE 2000 Datasets

84

Specifications

SUPERCONSOLE 2000 Reserve Power Units

When battery backup for the system is provided, reserve power for the consoles should also be considered. If AC power is lost, the console loses its communications functions, video functions, and data interfaces. You can provide back-up power to the consoles with an uninterruptible power supply (UPS). SUPERCONSOLE 2000 Console UPS - Recommended Models
Manufacturer Model Workstations Supported 117 V, 60 Hz 220 V, 50 Hz Battery voltage Nominal Discharge Time Maximum Discharge Time* Nominal Recharge Time Length Width Height Weight Operating Temperature Humidity Level Pylon UPS250 One Yes Yes 48 V 15 minutes 8.5 hr 2.5 hr 16 in. (40.6 cm.) 17 in. (43.2 cm.) 10.7 in. (27.2 cm.) 72 lb. (32.7 kg.) 32-104F (0-40C) 0-95% RH Sola 26-00-50730-300-00 Four/Five Yes Yes 72 V 10 minutes Indefinite 1.5 hr 19 in. (48.3 cm.) 12 in. (30.5 cm.) 10.5 in. (26.7 cm.) 120 lb. (54.5 kg.) 32-104F (0-40C) 0-95% RH AT-800 One-Four Yes No 24 V 120 min (1)20 min (4) No external battery pack available 11 hr 15.5 in. (39.4 cm.) 12 in. (30.5 cm.) 8.6 in. (21.8 cm.) 72 lb. (32.7 kg.) 32-104F (0-40C) 0-95% RH PTI

*Only if external battery packs (available from manufacturer) are used. Consult manufacturer if you need to extend nominal discharge time. Note:Consult the UPS manufacturer and local electrical authority to make certain that a customer-installed UPS complies with the local Electrical Code.

85

SX-2000 General Information Guide

Traffic and Performance

Criteria Busy Hour Call Completions (BHCC)* Both Way Traffic Per Station 9.44 per second 33970 per hour At 1200 ONS/OPS lines and 12% analog trunking with analog signaling, the following should not be exceeded: Call/Hr Erlang CCS Response Time Specification Delay to Dial Tone Dial Tone Cut Off Delay Post-Dialing Delay Software DTMF, Trunks DSU 25.28 0.81 29 1s 500 ms 1.5 s <0.0001 Blocking Probability Provisioning dependent Provisioning dependent Result

Data Blocking Possibilities

Note: The BHCC will vary according to individual customer configuration and usage.

Attendant Console Requirements

Average Number of Attendants Required Number of Lines Supported Light Traffic (1.4) Medium Traffic (2.8) 100 200 240 300 400 500 600 700 800 900 1000 1100 12002 1300 Notes: 1. These figures based on originating CCS/line. 2. The maximum number of lines supported on SX-2000 LIGHT systems is 1200. 1 1 1 2 2 2 2 2 2 3 3 3 3 3 1 2 2 2 3 3 3 3 4 4 4 5 5 5 Heavy Traffic (5.3) 2 3 3 3 4 4 5 5 6 6 7 7 8 8

86

Specifications

Tone Plan Support

The system supports tone plans for the following countries: China Germany Hong Kong Italy Malaysia New Zealand North America Taiwan United Kingdom. For more information, see the Tone Plans section of the Technical Documentation CD-ROM.

87

SX-2000 General Information Guide

Capacity Levels, Software Configurations, and Dimensions

The dimensions and feature allocations determine the size of the system in terms of its ability to support peripheral devices and features. The capacity levels, software configurations, and dimensions are divided into the following classes: MITEL Feature Resource Dimensions (MFRDs), page 88 MSDN/DPNSS Network Resource Dimensions (MNRDs), page 97 MITEL Traffic Capacity Levels (MTCLs), page 98, Application Capacity Levels MITEL HCI Capacity Level (MHCL), page 99 MITEL TAPI Service Provider (MTSPs), page 99 MITEL ACD Agent Capacity Level (MACLs), page 99, MITEL Agent ID Appearance Capacity Level (MAIACLs), page 100 MITEL Maximum Line appearances Capacity Level (MLCLs), page 100,

MITEL Software Applications (MSAs)., page 101

Options can be purchased individually or as part of a MITEL Software Bundle (MSB), page 104, or MITEL Core Package (MCP), page 104.

MITEL Feature Resource Dimensions (MFRDs)

MITEL Feature Resource Dimensions (MFRDs) MFRD-A-14 MFRD-A-16 MFRD-A-18 MFRD-A-20 MFRD-A-21 MFRD-A-22 MFRD-A-23 MFRD-A-24 MFRD-A-26 MFRD-A-40 MFRD-A-42 MFRD-A-44 Small Business Package (352 ONS/OPS) Medium Business Package (1360 ONS/OPS) Large Business Package (2500 ONS/OPS) ONS/OPS Package (3500 ONS/OPS) Multiline Set Package (455 ONS/OPS) Dataset Package (1000 datasets) Resale/Tandem Package (1300 trunks and 11,000 account codes) Centralized Attendant Package (9300 TEL DIR) Large Centralized Attendant Package (22500 TEL DIR) 32-Station Package 48-Station Package 96-Station Package

The following tables provide the maximum number of resources available for the various parameters of each MITEL feature resource dimension (MFRD).

88

Capacity Levels, Software Configurations, and Dimensions

Note: Some system dimensions can be tailored to meet specific business needs by using the Flexible Dimensioning optional feature package. For more information, see the Flexible Dimensioning section of the Technical Documentation CD-ROM.

Hardware Dimensions
Hardware Dimensions MFRD Level (see Note 1) Parameter Name 14
Attendant Consoles, page 36, (Note 2) DNI Channels (Note 3) DTRX Service (Data Transceiver Circuits) Modems Programmable Key Modules (PKMs), page 36 SUPERCONSOLE 2000 Consoles, page 49, (Note 4) System Ports (Note 5): - Datasets, page 51 - DTMF Receivers - Multiline Sets, page 36 - Single Line Sets (ONS/OPS Lines, page 9,) - Trunks, page 9, (Note 6) Tone Detector Circuits (Note 7) Notes: 1. Each MFRD provides support for all of the parameters at the listed levels. These numbers are not mutually exclusive; for example, at MFRD 40, you can have 32 multiline sets and 32 single line sets for a total of 64. 2. The difference between the maximum number of SUPERCONSOLE 2000 consoles allowed and the total number of attendant consoles allowed may be made up with SUPERCONSOLE 1000 units without the printer port enabled. 3. A DNI line card provides 16 DNI circuits with 2 DNI channels per circuit. Given the total number of DNI channels, you can determine the maximum number of DNI line cards. For example, with MFRD 14, you can have 448 DNI channels or 14 DNI line cards (448 divided by 2 x 16). 4. The maximum number of SUPERCONSOLE 2000 consoles that can be used in the system depends on the Main Controller card and MITEL Traffic Capacity Level (MTCL). For the purposes of hardware dimensions, a SUPERCONSOLE 1000 attendant console with its printer port enabled is treated as a SUPERCONSOLE 2000 console. 5. Although the system dimensions permit support for these figures, each peripheral cabinet has a physical maximum of 192 ports and each DSU cabinet has a physical maximum of 240 (multiplexed) ports. 6. When a trunk card is programmed in the System Configuration form, the maximum number of trunks is allocated automatically. For example, 8 trunks will be allocated for the LS/GS card, and 4 trunks will be allocated for the E&M card. 7. A Tone Detector card must be used to achieve the maximum 32 circuits. The 32 circuits on the Tone Detector card replace the 10 tone detection resources on the Main Controller card. 16 64 144 352 144 32 16 128 300 1360 312 32 16 128 756 2504 628 32 400 160 450 3500 628 32 362 128 1600 456 400 32 1000 128 756 1504 628 32 200 128 504 1504 1300 32 200 128 300 1360 628 32 400 128 756 2504 628 32 16 64 32 32 128 32 16 64 48 48 128 32 16 64 96 96 128 32 8 448 24 2 15 8

16
16 864 24 20 30 16

18
24 2368 48 40 75 16

20
24 1764 48 40 45 16

21
24 3988 48 30 150 16

22
24 3552 48 100 75 16

23
48 1504 48 40 50 16

24
48 1120 48 40 30 16

26
24 2368 48 40 10 16

40
2 64 24 4 16 2

42
4 96 24 4 24 4

44
6 192 24 2 32 6

89

SX-2000 General Information Guide

Feature Dimensions
Feature Dimensions
MFRD Level Feature Name 14
Attendant Console Groups Attendant Console Calls Waiting Broadcast Groups Busy Lamp Groups (Monitored Devices) Call Reroute Always Call Reroute 1st Alternates Call Reroute 2nd Alternates Class of Restriction (COR) Numbers Class Of Service (COS) Dataset Groups Default Account Codes Departments (in Tel Dir) Digit Modification Tables Digit Blocks Digital Links (Note 1) DTS Service Numbers Group Page groups Hunt Groups (Note 2) Independent Account Codes Locations (in Tel Dir) Modem Groups Modems per Modem Group Page Groups (Zones) Personal Speed Call Users (Note 3) (blocks of 10 speed calls per user) Pickup Groups Routes Route Lists Speed Call Digit String (avg. 12 digits) Suite Services - Single 10 4 20 400 30 2 8 2 100 32 12 64 572 50 10 20 16 500 64 16 176 3000 70 15 40 16 500 64 16 200 1000 70 15 40 16 700 200 16 120 1000 70 10 40 16 100 64 16 150 1000 70 20 40 16 500 64 16 150 11000 70 15 40 16 500 64 16 176 1000 150 10 40 16 300 64 16 176 1000 70 15 40 16 500 16 2 16 1000 70 4 4 4 16 24 3 24 1000 70 4 4 4 24 36 4 48 1000 70 4 4 8 48 12 26 360 71 20 500 16 64 64 2 50 50 256 600

16
24 48 750 184 64 500 16 64 64 2 100 50 256 600

18
48 72 1875 438 176 500 32 96 96 2 225 700 256 2000

20
36 72 1126 462 210 400 38 96 96 45 200 700 256 2000

21
36 72 3200 365 120 336 32 96 96 35 200 700 256 2000

22
36 72 1875 338 150 336 32 96 96 160 190 700 256 2000

23
60 99 1250 275 150 336 32 96 96 45 400 700 256 2400

24
60 99 750 211 176 336 42 96 96 45 225 1500 256 2000

26
48 72 1875 438 176 336 32 96 96 45 225 700 256 2000

40
12 99 240 28 32 256 32 96 96 4 255 700 256 2000

42
12 99 360 42 32 256 32 96 96 4 255 700 256 2000

44
12 99 480 59 32 256 32 96 96 4 255 700 256 2000

48 200 128 500 124

100 200 128 2500 415

200 200 128 2500 815

150 200 128 3500 987

130 200 128 500 514

170 200 128 2500 565

170 200 128 2500 502

200 200 128 1500 415

200 200 128 2500 815

16 200 128 420 16

24 200 128 420 24

48 200 128 420 48

Page 1 of 2

90

Capacity Levels, Software Configurations, and Dimensions

Feature Dimensions (continued)

MFRD Level Feature Name 14
Suite Services - Linked SUPERSET Callback Messages per System (see Note 4) System Account Codes System Digit Strings (Note 5) System Speed Call Telephone Directory Entries Trunk Groups Trunks per Trunk Group Trunk Service Numbers Notes: 1. MFRD packages no longer include a set threshold limit for digital links. They are automatically enabled by the software and appear on the SX-2000 Feature Options Record sheet, included with your system package. The following table describes supported Digital Link values (for the corresponding MFRD level) as a reference for those not performing software upgrades: Digital Links 8 13 27 26 26 26 40 26 26 4 4 4 41 96

16
138 200

18
271 500

20
329 200

21
171 1100

22
188 500

23
167 500

24
138 200

26
271 500

40
5 64

42
8 96

44
16 144

16 1049 150 500 20 60 40

16 3306 500 1360 64 96 64

24 6814 600 3600 112 175 150

24 8091 500 4500 112 175 150

24 4517 400 3000 71 175 150

24 6074 600 3070 112 175 150

30 4188 600 3070 212 175 312

24 9999 600 9300 112 175 150

24 32280 600 22500 112 175 150

16 6814 600 3600 64 64 64

16 6814 600 3600 64 64 64

16 6814 600 3600 64 64 64

When programming digital trunk cards, do not exceed the number of trunks allowed and available within the MFRD level. Trunks are allocated when the digital trunk card is added to the System Configuration form. For example, 48 trunks are allocated when a DS1 Formatter card is added and 60 trunks are allocated when a CEPT Formatter card is added. The Dimension and Feature Display form shows the number of allocated trunks. 2. With ACD 2000 Hunt Mode, up to 150 telephones may be programmed in one hunt group (at MFRD 12 or higher). A maximum of 64 of the available hunt groups can be programmed as ACD groups. For example, MFRD 24 allows 175 hunt groups, but only 64 of the available 175 hunt groups can be programmed as ACD groups. 3. The Personal Speed Call Users value is calculated using a default of 10 personal speed calls per user. If you allow each user more than 10 personal speed calls, your allowable block of personal speed calls is used up faster. This results in a lower number of users with a higher number of personal speed calls. 4. The number of messages includes both callback messages and voice mail messages. 5. Each digit string pool entry can hold up to seven digits but can be used for only one SWID. Numbers larger than seven digits require more than one digit string pool entry (one for each seven digits).

Page 2 of 2

91

SX-2000 General Information Guide

Other Parameters
The parameters described below are also features that are provided with each MFRD package; however, the resource limitations for these features are not MFRD dependant (i.e. the maximum resource values remain consistent across all MFRDs). Consoles Per Attendant Console Group - The maximum number of attendants in each attendant console group is 15. Sets per Broadcast Group - The maximum number of telephones per broadcast group is 16, 20, 24, 28, or 32 (depending on the purchased option). Call Progress Tone Plans - Call progress and supervisory tones generated within the system are programmed to meet the requirements of the telephone authority of the country in which the system is installed. The tones generated are not programmed by the installer; they are part of the country option of the core package software load. The system provides 100 different tone plans. Conferees per Conference - The maximum number of conferees per conference is 8 (any combination of internal or external conferees as long as one is internal). Conferees Per System - Without the Conference card, the maximum number of conferees per system is 24 (at one time). With the Conference card, the maximum number of conferees per system is 64. Conferences Per System - Without the Conference card, the maximum number of three-party conferences per system is 8. With the Conference card, the maximum number of conferences per system is 21. Dataset Circuit Descriptors - Dataset circuit descriptors are used to define dataset circuits by specifying the parameters used by the various datasets supported by the system. One circuit descriptor is assigned to each similarly configured groups of dataset circuits. Default dataset descriptors for specified device classes and usage types may be used, or individual parameters may be programmed. A total of 32 dataset circuit descriptors may be programmed. Datasets Per Dataset Group - The maximum number of datasets that can be programmed into one dataset hunt group is 50. Day Zones per Week - There are 3 day zones available, and each of the day zones can be divided into 4 time zones (12 individual day/time zones). These zones are used with the Automatic Route Selection (ARS) feature and the Advanced Automatic Route Selection feature package (MSA 2) to implement Day and Time Zones. DTE Terminal Profiles - DTE (data terminal equipment) terminal profiles are used with the advanced data application. There are 16 DTE terminal profiles available. Sets per Hunt Group - The maximum number of telephones allowed in each hunt group is 64; however, with ACD 2000 hunt mode at MFRD 12 or higher, up to 150 telephones may be programmed in one hunt group.

92

Capacity Levels, Software Configurations, and Dimensions

Intercept Numbers - Intercept numbers (maximum of 32) are used to control what happens to a call when the call cannot be completed to the required destinations. A call may be routed to a tone or to a directory number. Two alternate destinations may be programmed for each condition. Interconnect Numbers - Each peripheral device is assigned an interconnect number (maximum of 64) which is used to bar the connection of one device and another. The interconnect number is an index to the Interconnect Restriction Table that is programmed in CDE. Multiline Set Status Message Languages - Advisory (status) messages can be programmed in different languages on multiline display telephones. The languages supported are English, French, Italian, German, European Spanish, Latin American Spanish, or Dutch. Only three languages can exist on the system at one time. Multiline Set Status Messages per Language - Up to 20 advisory (status) messages in each of three languages can be programmed. Each advisory message may be up to 13 characters in length. Node Identifiers - The node identifiers let each system operate as a tandem switch in a network to determine if an incoming call applies to it or to another system in the network. Up to 5 local node identifiers and 50 remote leading digits are permitted. Each node identifier is a number with 7 or fewer digits. Sets per Pickup Group - A maximum of 75 users can be programmed in each pickup group. Routes per Route List - There can be up to 6 routes in each route list. Route Plans - Route plans provide a method of presenting different routes to calls as a function of day and time. There are 32 route plans.For additional information, see the Route Plan Assignment form in the Mitel Documentation CD-ROM. Station Circuit Descriptors - Station circuit descriptors are used to assign the operational (signaling and timing) parameters to ONS and OPS circuits. They are not used for DNI circuits. There is a maximum of 16 station circuit descriptors available.

Supported MFRDs (no longer sold)

The following MFRDs are no longer sold, but are supported: MFRD-A-01 MFRD-A-02 MFRD-A-03 MFRD-A-07 MFRD-A-12 MFRD-A-25 MFRD-A-27.

93

SX-2000 General Information Guide

Hardware Dimensions (no longer sold)

MFRD Level Parameter Name 1 Attendant Consoles (Note 1) DNI Channels (Note 2) DTRX Service (Data Transceiver Circuits) Modems Programmable Key Modules (PKMs) SUPERSET 700 Consoles (Note 3) System Ports (Note 4): - Datasets - DTMF Receivers - Multiline Sets - Single Line Sets (ONS/OPS Lines) - Trunks (Note 5) Tone Detector Circuits (Note 6) 48 64 72 192 112 32 64 128 144 352 144 32 96 128 240 752 204 32 112 128 300 1360 312 32 400 128 756 2504 628 32 100 160 675 2800 628 32 208 128 500 1000 1600 32 4 256 24 6 10 8 2 8 448 24 8 15 8 3 8 704 24 12 25 8 7 16 864 24 20 30 16 12 24 2368 48 40 75 16 25 24 1764 48 10 65 16 27 32 1504 48 40 50 16

Notes:
1. The difference between the maximum number of SUPERSET 700 consoles allowed and the total number of attendant consoles allowed may be made up with SUPERCONSOLE 1000 units without the printer port enabled. 2. A DNI line card provides 16 DNI circuits with 2 DNI channels per circuit. Given the total number of DNI channels, you can determine the maximum number of DNI line cards. For example, with MFRD 2, you can have 448 DNI channels or 14 DNI line cards (448 divided by 2 x 16). 3. The maximum number of SUPERSET 700 consoles that can be used in the system depends on the Main Controller card and MITEL Traffic Capacity Level (MTCL). For the purposes of hardware dimensions, a SUPERCONSOLE 1000 attendant console with its printer port enabled is treated as a SUPERSET 700 console. 4. Although the system dimensions permit support for these figures, each peripheral cabinet has a physical maximum of 192 ports and each DSU cabinet has a physical maximum of 240 (multiplexed) ports. 5. When you program a trunk card in the System Configuration form, the maximum number of trunks is allocated automatically. For example, 8 trunks will be allocated for the LS/GS card and 4 trunks will be allocated for the E&M card. 6. A Tone Detector card must be used to achieve the maximum 32 circuits. The 32 circuits on the Tone Detector card replace the 10 tone detection resources on the Main Controller card.

94

Capacity Levels, Software Configurations, and Dimensions

Feature Dimensions (no longer sold)

MFRD Level Parameter Name 1 2 12 26 180 37 16 26 16 64 64 10 20 50 256 600 2 8 2 14 400 20 4 6 360 71 20 60 16 64 64 10 50 50 256 600 8 10 4 20 400 30 4 8 2 36 15 200 128 420 48 16 100 50 200 128 900 96 16 3 12 26 600 135 36 110 16 64 64 10 70 50 256 600 8 16 8 36 400 35 6 12 2 200 70 200 128 1000 160 16 7 24 48 750 184 64 256 16 64 64 10 100 50 256 600 10 32 12 64 512 50 10 20 16 500 100 200 128 2500 200 16 12 48 72 1875 438 176 336 32 96 96 45 225 700 256 2000 26 64 16 176 1000 70 15 40 16 500 200 200 128 2500 500 24 25 36 72 1688 449 209 400 38 96 96 8 200 700 256 2000 26 64 16 99 1250 70 10 40 16 700 240 128 64 3500 200 24 27 60 96 500 150 200 336 32 96 96 45 400 700 256 2400 40 64 8 150 8000 70 15 40 16 500 170 200 128 2500 500 30

Attendant Console Groups

Attendant Console Calls Waiting

Broadcast Groups Busy Lamp Groups (Monitored

Devices)

Call Reroute Always Call Reroute 1st Alternates Call Reroute 2nd Alternates Class of Restriction (COR) Numbers Class Of Service (COS) Dataset Groups Default Account Codes Departments (in Tel Dir) Digit Modification Tables Digit Blocks Digital Links (Note 1) DTS Service Numbers Group Page groups Hunt Groups (Note 2) Independent Account Codes Locations (in Tel Dir) Modem Groups Modems per Modem Group Page Groups (Zones) Personal Speed Call Users (Note 3) (blocks of 10 speed calls per user) Pickup Groups Routes Route Lists Speed Call Digit String (avg. 12 digits)
SUPERSET Callback Messages per System (see Note 4)

System Account Codes

Page 1 of 2

95

SX-2000 General Information Guide

Feature Dimensions (no longer sold) (continued)

MFRD Level Parameter Name 1 System Digit Strings (Note 5) 584 100 300 14 50 18 2 1049 150 500 20 60 40 400 3 2027 250 900 34 70 50 400 7 3306 500 1360 64 96 64 512 12 6814 600 3600 112 175 150 1000 25 8091 500 4600 100 175 150 1250 27 30000 600 20000 212 175 312 n/a

System Speed Call Telephone Directory Entries Trunk Groups Trunks per Trunk Group Trunk Service Numbers
Verified Account Codes

Notes:
1. When programming a digital trunk card, you must not exceed the number of trunks allowed and available within your MFRD level. Trunks are allocated as soon as a digital trunk card is added to the System Configuration form. For example, 48 trunks are allocated when a DS1 Formatter card is added and 60 trunks are allocated when a CEPT Formatter card is added. The Dimension and Feature Display form shows the number of allocated trunks. 2. With ACD 2000 Hunt Mode, up to 150 telephones may be programmed in one hunt group (at MFRD 12 or higher). A maximum of 64 of the available hunt groups can be programmed as ACD groups. For example, MFRD 24 allows 175 hunt groups, but only 64 of the available 175 hunt groups can be programmed as ACD groups. 3. The number of messages includes both callback messages and voice mail messages. 4. Each digit string pool entry can hold up to seven digits but can be used for only one SWID. Numbers larger than seven digits require more than one digit string pool entry (one for each seven digits). Page 2 of 2

96

Capacity Levels, Software Configurations, and Dimensions

MSDN/DPNSS Network Resource Dimensions (MNRDs)

MSDN/DPNSS Network Resource Dimensions (MNRDs) Prerequisites

MNRD-A-02 MNRD-A-03 MNRD-A-04 MNRD-A-05 MNRD-A-10 MNRD-A-30

MNRD-A-60

2 PBXs 3 PBXs 4 PBXs 5 PBXs 6-10 PBXs 11-30 PBXs

31-60 PBXs

MSA-A-41 MNRD-A-02 MNRD-A-03 MNRD-A-04 MNRD-A-05 MNRD-A-10

MNRD-A-30

MSDN/DPNSS Network Resource Dimensions (MNRDs) Resource PBXs in the cluster (Note 1) Telephone Directory Records Remote Device Records System Dspool Records Additional Digit Tree Records (Note 2) Locations Departments 2 2 3000 1500 3000 167 150 700 3 3 4500 3000 4500 333 200 750 4 4 6000 4500 6000 500 250 800 5 5 7500 6000 7500 677 250 850 10 10 12000 10500 12000 1167 250 1200 30 30 20000 18500 20000 2055 250 2000 60 60 30000 28500 30000 3167 250 2000

Notes:
1. If the existing resource dimension for the cluster element is larger than the MSDN/DPNSS resource dimension listed, the existing dimension is allocated. 2. The total number of digit tree records is the number of records allocated by the existing resource dimension plus the number of records for the specified MSDN/DPNSS resource dimension.

97

SX-2000 General Information Guide

MITEL Traffic Capacity Levels (MTCLs)

MITEL Traffic Capacity Level (MTCL) MTCL-A-05 MTCL-A-10 MTCL-A-15 MTCL-A-20 MTCL-A-30 MTCL-A-31 MTCL-A-32 100 simultaneous two-party connections 180 simultaneous two-party connections 230 simultaneous two-party connections 640 simultaneous two-party connections 760 simultaneous two-party connections 640 simultaneous two-party connections 860 simultaneous two-party connections

MITEL Traffic Capacity Levels (MTCL) Resource Call Processes (Note 1) Callbacks per System Device Campons per System Group Campons per System Hard Holds per System Simultaneous two-party connections Telephone Mode Processes (Note 2) Wake-up Calls in 1 Minute Wake-up Calls in 5 Minutes 1 120 30 16 5 30 60 6 15 60 5 200 40 24 8 40 100 6 20 80 10 360 100 48 20 100 180 12 38 152 15 460 128 64 30 128 230 14 50 200 20 1280 260 144 70 260 640 37 100 400 30 1520 350 250 140 350 760 25 120 480 31 1280 260 144 140 260 640 50 90 360 32 1720 240 130 50 240 860 37 75 300

Notes:
1. A call process is equivalent to one party in a call. For example, in a call where two parties are talking and a third is on hold (consultation call), three call processes are involved; an eight-party conference consists of eight call processes. 2. The following telephone keys (on SUPERSET 430, SUPERSET 4025, SUPERSET 4125, and SUPERSET 4150 telephones) are considered Mode Processes: SUPERKEY, Messaging softkey, Phonebook softkey, and Account Code softkey.

98

Capacity Levels, Software Configurations, and Dimensions

Application Capacity Levels

The Application Capacity Levels determine the systems ability to support various software applications and features.

MHCL: MITEL HCI Capacity Level

MITEL HCI Capacity Level (MHCL) MHCL-A-1 MHCL-A-2 MHCL-A-3 MHCL-A-4 MHCL-A-5 MHCL-A-10 MHCL-A-15 MHCL-A-20 1 HCI session and 100 call monitors 2 HCI sessions and 200 call monitors 3 HCI sessions and 300 call monitors 4 HCI sessions and 400 call monitors 5 HCI sessions and 500 call monitors 10 HCI sessions and 1000 call monitors 15 HCI sessions and 1500 call monitors 20 HCI sessions and 2000 call monitors Prerequisites MSA-A-25 and MSA-A-26 MHCL-A-1 MHCL-A-2 MHCL-A-3 MHCL-A-4 MHCL-A-5 MHCL-A-10 MHCL-A-15

Note:MHCLs 1 through 5 may be intermixed with all MACLs and MLCLs.

MTSP: MITEL TAPI Service Provider

MITEL TAPI Service Provider MTSP-A-10 MTSP-A-20 MTSP-A-40 MTSP-A-60 MTSP-A-80 1 to 10 users 11 to 20 users 21 to 40 users 41 to 60 users 61 to 80 users Prerequisites MSA-A-47 MTSP-A-10 MTSP-A-20 MTSP-A-40 MTSP-A-60

MACL: MITEL ACD Agent Capacity Level

MITEL ACD Agent Capacity Level (MACL) MACL-A-005 MACL-A-010 MACL-A-015 MACL-A-020 MACL-A-025 MACL-A-030 MACL-A-035 MACL-A-040 MACL-A-045 1 - 5 ACD agents 6 - 10 ACD agents 11 - 15 ACD agents 16 - 20 ACD agents 21 - 25 ACD agents 26 - 30 ACD agents 31-35 ACD agents 36-40 ACD agents 41-45 ACD agents Prerequisites MSA-A-40 MACL-A-005 MACL-A-010 MACL-A-015 MACL-A-020 MACL-A-025 MACL-A-030 MACL-A-035 MACL-A-040

99

SX-2000 General Information Guide

MITEL ACD Agent Capacity Level (MACL) MACL-A-050 MACL-A-060 MACL-A-070 MACL-A-080 MACL-A-090 MACL-A-100 MACL-A-150 MACL-A-200 MACL-A-350 46-50 ACD agents 51-60 ACD agents 61-70 ACD agents 71-80 ACD agents 81-90 ACD agents 91-100 ACD agents 101-150 ACD agents 151-200 ACD agents 201-350 ACD agents

Prerequisites MACL-A-045 MACL-A-050 MACL-A-060 MACL-A-070 MACL-A-080 MACL-A-090 MACL-A-100 MACL-A-150 MACL-A-200

Note:If you program agents as members of more than one ACD group the ACD agent resource level may determine the maximum number of agents that you can have. Each agent uses one resource. Each time an agent appears in another group it uses up another resource. For example, one agent in one ACD group uses one resource; one agent in two groups takes up two resources; one agent in three groups takes up three resources, and so forth.

MAIACL: MITEL Agent ID Appearance Capacity Level

MITEL Agent ID Appearance Capacity Level (MAIACL) MAIACL-A-02 MAIACL-A-04 MAIACL-A-08 2 agent appearances 4 agent appearances 8 agent appearances Prerequisites MSA-A-40 MSB-A-07 MAIACL-A-04

MLCL: MITEL Maximum Line Appearances Capacity Level

MITEL maximum Line appearances Capacity Level (MLCL) MLCL-A-16 MLCL-A-20 MLCL-A-24 MLCL-A-28 MLCL-A-32 16 maximum line appearances 20 maximum line appearances 24 maximum line appearances 28 maximum line appearances 32 maximum line appearances

100

Capacity Levels, Software Configurations, and Dimensions

MITEL Software Applications (Optional Features)

MITEL Software Applications (MSAs) are optional feature packages that enhance system functionality. The following MSAs are currently available:
MITEL Software Applications (MSAs) Number MSA-A-01 MSA-A-02 MSA-A-03 MSA-A-04 MSA-A-05 MSA-A-06 MSA-A-07 MSA-A-08 MSA-A-09 MSA-A-10 MSA-A-11 MSA-A-12 MSA-A-14 MSA-A-15 MSA-A-16 MSA-A-17 MSA-A-18 MSA-A-19 MSA-A-20 MSA-A-21 MSA-A-22 MSA-A-23 MSA-A-24 MSA-A-25 MSA-A-26 Option Name Prerequisites Notes

COV Set Advanced ARS SMDR - External Advanced Data Message Center T1/D4 Hotel/Motel Traffic Reporting Trunk Group Busy Status Attendant Language Selection Advanced Analog Networking Main Control Redundancy Digital Network Interface (DNI) MSDN/DPNSS Voice I MSDN/DPNSS Voice II MSDN/DPNSS Voice III MSDN/DPNSS Data MSDN/DPNSS Public Network Access ANSWER PLUS - MITEL Call Distribution (MCD) MSDN/DPNSS Voice IV MSDN/DPNSS Redirection ANSWER PLUS Automatic Attendant DASS II Voice I HCI/CTI Basic Telephony Control HCI/CTI Advanced Telephony Control
MSA-A-25 Page 1 of 4 MSA-A-20 EMEAAP only MSA-A-15 or MSA-A-31 MSA-A-15 or MSA-A-31 MSA-A-15 or MSA-A-31 MSA-A-15 or MSA-A-31 MSA-A-15 or MSA-A-31

101

SX-2000 General Information Guide

MITEL Software Applications (MSAs) (continued) Number MSA-A-27 Option Name Prerequisites MSA-A-20 Notes Superceded See MSA-A-40

ANSWER PLUS Automatic Call Distribution (ACD) I MSDN Release Link Trunks Visually Handicapped Operator Console (VHOC) MSAN/APNSS MSDN/DPNSS Voice V
Multi-Level Precedence and Preemption (MLPP) Application

MSA-A-28 MSA-A-30

MSA-A-15 or MSA-A-31 EMEAAP only

MSA-A-31 MSA-A-32 54002180

MSA-A-15 or MSA-A-31

MSA-A-34 MSA-A-35 MSA-A-36 MSA-A-37 MSA-A-38 MSA-A-39 MSA-A-40

SMDR - Internal Flexible Dimensioning ANI/DNIS/ISDN Number Delivery MNMS/SNMP Fault

Management I For OPSMan alarms Management. For OPSMan Directory Mgmt. MFRD-A-07 or MFRD-A-16 (minimum)

MNMS Configuration Management I SUPERSET 700 Color ANSWER PLUS MSA-A-20 Automatic Call Distribution II (ACD 2000) MSDN/DPNSS Voice VI MNMS Configuration
Management III MSA-A-15 MNRD-A-02

MSA-A-41 MSA-A-42 MSA-A-43 MSA-A-44 MSA-A-45 MSA-A-46 MSA-A-47 MSA-A-48 MSA-A-49

For OPSMan Portable Directory Number Operation For OPSMan Configuration Mgmt.

Networked ACD MNMS Database Access DSS/BLF ACD 2000 Skill-Based Routing TAPI Support ACD 2000 Extended Agent Groups Emergency Services

MSA-A-41 For OPSMan Database Access MSA-A-41 (for network version only) MSB-A-07 Network DSS/BLF must be used with OPSMan

MSA-A-40 Universal NSU or PRI card

Local Notification available in

LIGHTWARE 30 Release 3.1 Page 2 of 4

102

Capacity Levels, Software Configurations, and Dimensions

MITEL Software Applications (MSAs) (continued) Number MSA-A-50 Option Name Prerequisites Notes Required when ordering the first Peripheral Expansion Node II in the system Universal NSU or PRI Card Does not work with Network Gateway Works with Universal NSU or PRI card. Enhanced portion needs ISDN R 7.0.

Peripheral Node Expansion XNET QSIG

MSA-A-51 MSA-A-52

MSA-A-53 MSA-A-54 MSA-A-61 MSA-A-62 9125-501-001-NA 9125-501-002-NA 9125-501-003-NA 9125-501-004-NA 9125-501-005-NA 54000094 54000280

Voice Mail Softkeys ACD Real Time Events CLASS/CLIP Station Side Software Support Speak@Ease Integration PRI - Min/Max PRI - Auto Min/Max PRI - NFAS PRI - D-channel Backup PRI - Remote LAN Access Suite Services Feature Level 1
(Feature Level 1 content is part of the base software load from LIGHTWARE 31 Release 1.0.) MSA-A-07 Includes: Networked Group Page Hold on Hold Call Forward - Delay ACD Make Busy Reason Codes Telephone Usage Restriction (Curfew Control) Call Duration Control MSA-40 or MSA-A-27 ONS CLASS /CLIP line card

54000450

Feature Level 2
(Feature Level 2 content is part of the base software load from LIGHTWARE 32 Release 1.0.)

Includes: DNIC RAD Multiple Message Waiting Indications Remote Wake-up Calls Hotel/Motel Multiple Wake-up Support SMDR Extended Reporting Level 1 Page 3 of 4

103

SX-2000 General Information Guide

MITEL Software Applications (MSAs) (continued) Number 54000510 Option Name Prerequisites Includes: Report Attendant Name Simplified Account Codes Maintain Calling Line ID Dial out of an ACD Queue Call Clearing on LS/GS Trunks Interconnect Restriction Override Headset Mute Switch Emergency Call Notification on Display Sets Hotel/Motel Multiple Wake-up Support on Consoles SMDR Path Reporting for Internal ACD2 Calls ACD Hold Retrieve/Abandon Event Shared Telephone Service for a Single Suite Disabled Account Code Reporting for Internal SMDR Tag Call (malicious call trace) 54000691 Notes

Feature Level 3
(Feature Level 3 content is part of the base software load from LIGHTWARE 32 Release 1.0.)

Feature Level 4

Disable Wake-up on Check-In Hold Key Retrieves Last Held Call Tenanting
Page 4 of 4

MITEL Software Bundles (MSBs)

MITEL Software Bundles (MSBs) are groups of MSAs that are suited to specific markets and applications. Depending on your country and region, these packages vary. See your authorized MITEL representative for further details.

MITEL Core Packages (MCPs)

MITEL Core Packages (MCPs) determine the basic configuration of the system. Depending on your country and region, these packages vary. See your authorized MITEL representative for further details.

104