0% found this document useful (0 votes)
110 views2 pages

01 - Signal Isolator AS-150-24

The AS-150-24 Signal Isolator by AStronic is designed for industrial applications, providing galvanic isolation for signals and supplies, ensuring safety and noise immunity for PLCs and DCSs. It features a slim design, dual output options, and a built-in 24VDC power supply, making it suitable for various signal types including RTD and thermocouples. The device is ideal for applications such as signal isolation, distribution, and interfacing of field devices in factory automation.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
110 views2 pages

01 - Signal Isolator AS-150-24

The AS-150-24 Signal Isolator by AStronic is designed for industrial applications, providing galvanic isolation for signals and supplies, ensuring safety and noise immunity for PLCs and DCSs. It features a slim design, dual output options, and a built-in 24VDC power supply, making it suitable for various signal types including RTD and thermocouples. The device is ideal for applications such as signal isolation, distribution, and interfacing of field devices in factory automation.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AStronic SIGNAL ISOLATOR AS-150-24

Technosystems LLP
Automation Simplified

Signal Isolator
Single/Dual Output

Slim. Reliable. Economical.

is Link selection facility on front to switch between


GENERAL DESCRIPTION :-
2 wire and 4 wire input in the unit.
AS-150-24 Signal isolator are specially designed to (This facility Optional only for 4-20 mADC Input.)
meet industrial standards. Galvanic Isolation of sign-
als and supplies is essential in many measurement FEATURES :-
systems. It is especially important while providing • Slim and elegant Design of 22.5mm for dual O/P.
input to PLC's or DCS's so that safety of such costly • 1.5 KV 3 Port Signal Isolation.
systems/instruments can be ensured. The instru- • Accurate and economical 2/4 wire input isolator.
ment has been designed to provide high galvanic 3 • Wide zero and span adjustment limits.
port isolation between I/P, O/P and mains supply. • Front Calibration facility via multiturn trimpot.
These isolators are mainly used between field • high Output load driving capacity.
transmitters and DCS's/PLC's. Secondly the instru- • Up to 2 outputs with protection.
ment increases the noise immunity from field to • 24VDC power supply inbuilt for 2 wire transmitter.
system. With Dual output option this model also
APPLICATIONS :-
acts as signal distributor. Application could be 1. Isolation of field Signals.
where the signals has to be distributed for indication 2. Distribution of Signals.
on local panel, field control room, PLC/DCS systems. 3. Interfacing of field devices.
It provides best protection to systems against high 4. Conversions of signals
voltage spikes. The instrument accepts any electrical 5. For Factory Automation.
signal of instrumentation standard,RTD, Thermo- 6. SCADA / DCS / PLC
couple and then converts the same to a standard 7. Increases immunity of systems.
voltage and current signals. It has a built -in 24VDC 8. Impedance matching of field instruments and
Power supply for 2 wire transmitters. user can conn- systems.
ect a source type input or 4 wire transmitters. There 9. Power Source for Field Instruments.
ASTRONIC TECHNOSYSTEMS LLP.
Works - Plot No 10, “PASAYADAN” Yashwant Nagar, Pimpri Telco Road, Pimpri, Pune 411018.
Maharashtra, INDIA. Website - www.astronic.co.in & Contact us - [email protected]
AStronic
SPECIFICATIONS :- Technosystems LLP
Automation Simplified

TECHNICAL :- CONNECTION DETAILS :-


OUTPUT 1 OUTPUT 2
• Input type :- Current / Voltage /RTD / T/C +VE -VE +VE -VE

• Input Range :- 0/4 to 20mADC, 0/1 to 5VDC, O/P 1 O/P 2


INPUT
+
+ - + - B +
0 to 10 VDC / Customise(Factory Set) LOAD

LOAD
LOAD
O/P 1
+
4-20mA +
A
-
V
-
• Input Impedance :- ≤ 100 Ohms for Current 2W

LOAD
-VE
B + LOAD
4W O/P 2
≥ 10K Ohms for Voltage -
ZR

• Output type :- Current / Voltage O/P1 20 to 32 VDC


AUX. SUPPLY

• Output Range :- 0/4 to 20mADC, 0/1 to 5VDC, SP


+Ve
PWR
0 to 10 VDC/Customise (Factory Set) -Ve

ZR
• Response Time :- ≤100ms O/P2
A -4-20mA -
• Accuracy :- 0.25% of FS SP
B + LOAD +
• Output Load Resistance :- up to 600 Ohms(Max) for I/P
AS-150-24

24Vdc
2 WIRE CONNECTIONS

Current and up to 10K A B + -


A+ LOAD
4-20mA
ohms (Max) for Voltage B- AUX.
INPUT AUX. SUPPLY 4 WIRE CONNECTIONS SUPP
• Transmitter Power Supply :- 24VDC (±10%)@26mA 24VDC

(Max Current Limit) ENVIRONMENTAL :-


O
• Aux. Supply :- 20 to 32 VDC • Operating Temperature :- 0 to 55 C
• Power Consumption :- less than 5VA • Relative Humidity :- up to 95% RH (Non-
• Power Indication LED :- Red color Condensing)
• Type of Isolation :- Galvanic • Protection :- Conformal Coating on PCB
PHYSICAL :-
• Enclosure Size :- 75(H) X 22.5 (W) X 110 (D) mm.
• Mounting Type :- Din Rail (35mm.)
• Enclosure Material - ABS.
• Mounting Clip :- Delrin
• Terminals :- 2.5 sqmm.
• Weight :- 140 Grm.
DIN RAIL SIZE :
35x7.5 mm
(35MM EN.50022)

Enclosure Details Enclosure Dim.


ORDERING INFO
Model No Supply Input type No of Output Output type 1 Output type 2
X X X X
A 0 to 10VDC 1 One 1 0 to 10VDC 1 0 to 10VDC
B 0 to 20 mADC 2 Two 2 0 to 20 mADC 2 0 to 20 mADC
150 24 C 4 to 20 mADC 3 4 to 20 mADC 3 4 to 20 mADC
D 1 to 5 VDC 4 1 to 5 VDC 4 1 to 5 VDC
E 0 to 5VDC 5 0 to 5VDC 5 0 to 5VDC
F Customise 6 Customise 6 Customise

ASTRONIC TECHNOSYSTEMS LLP.


Works - Plot No 10, “PASAYADAN” Yashwant Nagar, Pimpri Telco Road, Pimpri, Pune 411018.
Maharashtra, INDIA. Website - www.astronic.co.in & Contact us - [email protected]

You might also like