Product information
Klüber Noxlub KF 1920
High-temperature and long-term lubricating grease for a wide service
temperature range
Benefits for your application
– Wide service temperature range
– Neutral towards most plastics and elastomer materials
– Good damping properties
– Good wear and corrosion protection
– Free from sodium nitrite
Description Application notes
Klüber Noxlub KF 1920 is a fully synthetic long-term lubricating Klüber Noxlub KF 1920 can be applied by spatula, brush or
grease based on perfluorinated lubricant dispenser.
polyether, solid lubricants, and a soap-based thickening agent. For optimum lubrication results we recommend cleaning the
Klüber Noxlub KF 1920 offers excellent high-temperature friction points with white spirit 180/210 and then with Klüberalfa
stability across an extremely wide service temperature range as XZ 3-1 prior to initial application. Thereafter the friction points
well as providing good resistance to brake fluids, types DOT 3, should be blown with clean dry compressed air (or hot air) to
4, 5 and 5.1. remove all remaining white spirit residues.
All application points should be bright (i.e. free of oils, greases
Application and perspiration) and completely free from all contaminants
prior to initial lubrication. Please feel free to consult your local
Klüber Noxlub KF 1920 is especially recommended for long- Kluber technical sales department to ensure optimum
term lubrication of rolling bearings and other applications in the performance and therefore maximum service life is attained with
automotive industry. this special product.
Klüber Noxlub KF 1920 has proven successful for lubrication of
elastomer seals in hydraulic clutches as well as other high
temperature engine components. Material safety data sheets
Compatibility with elastomers and plastics Material safety data sheets can be requested via our website
Lubricating greases based on fluorinated polyether and PTFE www.klueber.com. You may also obtain them through your
are mostly neutral towards elastomers and plastics (except for contact person at Klüber Lubrication.
perfluorinated rubber). Prior to series application, however, we
recommend testing lubricant compatibility with the materials in
question.
Pack sizes Klüber Noxlub KF 1920
Can 1 kg +
Bucket 10 kg +
Product data Klüber Noxlub KF 1920
Article number 090080
NLGI grade, DIN 51818 2
Chemical composition, type of oil PFPE
Chemical composition, solid lubricant PTFE
Klüber Noxlub KF 1920,Prod. 090080,en
Edition 04.10.2016 [replaces edition 01.10.2016]
Product information
Klüber Noxlub KF 1920
High-temperature and long-term lubricating grease for a wide service
temperature range
Product data Klüber Noxlub KF 1920
Chemical composition, thickener sodium soap
Lower service temperature -40 °C / -40 °F
Upper service temperature 260 °C / 500 °F
Colour space white
Density at 20 °C approx. 1.90 g/cm³
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 194 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 36 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: <= 1 corrosion degree
1 week, distilled water
Low-temperature torque, IP 186, -40 °C, running < 100 mNm
Low-temperature torque, IP 186, -40 °C, start < 1 000 mNm
Oil separation, based on ASTM D 6184 [FTMS 791 C 321], after 24 h/100 °C <= 6 % by weight
Flow pressure of lubricating greases, DIN 51805, test temperature: -50 °C <= 1 400 mbar
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened 60 months
original container, approx.
Klüber Lubrication München SE & Co. KG /
Geisenhausenerstraße 7 / 81379 München / Germany /
Klüber Lubrication – your global specialist phone +49 89 7876-0 / fax +49 89 7876-333.
Innovative tribological solutions are our passion. Through The data in this document is based on our general experience and knowledge at
the time of publication and is intended to give information of possible applications
personal contact and consultation, we help our customers to be to a reader with technical experience. It constitutes neither an assurance of
successful worldwide, in all industries and markets. With our product properties nor does it release the user from the obligation of performing
ambitious technical concepts and experienced, competent staff preliminary field tests with the product selected for a specific application. All data
are guide values which depend on the lubricant's composition, the intended use
we have been fulfilling increasingly demanding requirements by and the application method. The technical values of lubricants change depending
manufacturing efficient high-performance lubricants for more on the mechanical, dynamical, chemical and thermal loads, time and pressure.
than 80 years. These changes may affect the function of a component. We recommend
contacting us to discuss your specific application. If possible we will be pleased to
provide a sample for testing on request. Klüber products are continually improved.
Therefore, Klüber Lubrication reserves the right to change all the technical data in
this document at any time without notice.
Publisher and Copyright: Klüber Lubrication München SE & Co. KG. Reprints,
total or in part, are permitted only prior consultation with Klüber Lubrication
München SE & Co. KG and if source is indicated and voucher copy is forwarded.
