Scribd
Upload
19 views1 page

ICN-H EN DE 04-75088-010000 AH17042024 English

The digsy® ICN-H is a mobile CAN-node designed to control DC motors and actuators with a rated current of up to 25A. It features control via CANbus or digital inputs, integrated software for guided stop and torque deactivation, and two operating modes. The module is housed in a plastic casing with a metal baseplate and operates within a temperature range of -25°C to +80°C.

Uploaded by

Tam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

ICN-H EN DE 04-75088-010000 AH17042024 English

The digsy® ICN-H is a mobile CAN-node designed to control DC motors and actuators with a rated current of up to 25A. It features control via CANbus or digital inputs, integrated software for guided stop and torque deactivation, and two operating modes. The module is housed in a plastic casing with a metal baseplate and operates within a temperature range of -25°C to +80°C.

Uploaded by

Tam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

digsy® ICN-H

4-quadrant H-bridge module for digsy® ICN-H is a mobile suitable CAN-node which has
been developed to control DC motors and actuators
DC-motors up to 25A rated current regarding rotating direction and speed. Alternatively, it
can be used as a high-current output device.
Integrated software modules for guided stop and
Control via CANbus or digital inputs. torque deactivation as well as the option to select two
different operating modes, ease the adaptation to the
Outputs for brake and error status. particular application.

2 operating modes per application.

Technical data Order codes

digsy® ICN-H digsy® ICN-H 4586.03.001


1 H-bridge: 25A rated current when mounted on metal plate
17A rated current without cooling
Accessories
Shutdown at 80A
ICN-H IO Cable 4308.44.002
2 outputs, GND-switching: Brake, max. 4A
ICN-H CAN Cable 1m 4308.44.003
Error, max. 1A
ICN-H Starter-Kit with
Parametrization tool and Programming cable 4308.44.010
CAN-Mode
1 CAN interface: CAN 2.0A/B
50 kBit/s…1 Mbit/s

2 inputs analog: 0-5V


Potentiometer
3 inputs digital

Stand-Alone-Mode
2 inputs analog: Motor speed
Max. motor speed

5 inputs digital: Rotating direction forwards


Rotating direction backwards
Operating mode selection
Torque deactivation
Guided stop
General:
- Operating voltage 12V: 10…16V
- Operating voltage 24V: 18…32V
- Operating temperature: -25°C…+80°C / -13°F…+176°F
- Plastic housing with metal baseplate
- EMC proof
- Environmental protection: IP20
- Dimension: appr. 90 x 50 x 30 mm

Inter Control Fon +49(0)911 9522-5


Hermann Köhler Elektrik GmbH & Co.KG Fax +49(0)911 9522-857
Schafhofstraße 30 Email: [email protected]
D-90411 Nuernberg, Germany Internet: www.intercontrol.de
Technical modifications are subject to change without prior notice.
Characteristics mentioned in this brochure are not warranted characteristics. 04-75088-010100

You might also like