Translated from Russian to English - www.onlinedoctranslator.

com

"VICTOR"

AUTHOR: YULIA MYAZINA

https://www.instagram.com/julja_myzina/
https://vk.com/myzinadolls

The description of this doll is paid and

cannot be distributed by third parties
SYMBOLS:
КА – amigurumi ring; VP –
air loop; sc – single
crochet; inc – increase;

уб — decrease;
ss - slip stitch;
FHL – front half loop (the half loop closest to you) BHL –
back half loop (the half loop further away from you).

MATERIALS For BODY:

yarn "PEKHORKA Openwork" color No. 68 (50g /

280 m), or Alize miss No. 170 or other similar;
Aluminum wire thickness 1 mm - 20 cm;
scissors;
hook 0.75 mm;
fabric plaster;
hat elastic 1 mm - 1 meter;
pliers;
beads 6 mm - 4 pcs, 8 mm - 4 pcs, 10 mm - 1 pc (beads 6
and 8 mm should have a hole wide enough to
accommodate a 1 mm hat elastic band, and 10 mm should
accommodate 2 1 mm elastic bands).
sewing needles and one long needle with a
wide hole;
acrylic matte water-soluble varnish; flat
painting brush;
one button 18 mm;
filler: synthetic padding or holofiber;
skewers for stuffing of different sizes.

2
 HANDS
RIGHT HAND:

Watch the video: "Right Hand".

Cast on 6 VP, then from the 2nd loop from the hook we knit:

LITTLE FINGER:ss,5 VP, 4 ss behind the back of the chain.

NAMELESS:ss,6 VP, 5 ss behind the back of the chain.

AVERAGE:ss,6 VP, 5 ss behind the back of the chain.

POINTING:ss,6 VP, 5 ss behind the back of the chain, ss.

1)On the top of the fingers: (2 sc, inc, 2 sc),on the other side of
the fingers: 5 sc (11)– put a marker
2) 11 sc (11)
3) sc, (6 ch, 5 ss behind the back of the chain), 10 sc. (11)

4) sc, 2 sc in thumb, 10 sc. (13)

5) 2 dec, 3 sc, dec, 4 sc. (10)

6) hdc, 2 dc in one loop, hdc, 6 ch, skip 2 loops, hdc, 2 dc in one

loop, hdc, 6 ch, skip 2 loops. (8)
7) ss behind the ZPP along the perimeter of the previous row.- cut the
thread, leave a 15 cm end

Add some filler to the top of the brush

3
LEFT BRUSH:

Watch the video: "Left Hand".

Cast on 6 VP, then from the 2nd loop from the hook we knit:

POINTING:ss,6 VP, 5 ss along the back side of the chain.

AVERAGE:ss,6 VP, 5 ss along the back side of the chain.

NAMELESS:ss,6 VP, 5 ss along the back side of the chain.

LITTLE FINGER:ss,5 VP, 4 ss along the back side of the chain, ss.

1)On the top of the fingers: (2 sc, inc, 2 sc),on the other side of
the fingers: 5 sc (11)– put a marker
2) 11 sc (11)
3) 5 sc, (6 ch, 5 ss behind the back of the chain), 6 sc. (11)

4) 5 sc, 2 sc in thumb, 6 sc. (13)

5) dec, 3 sc, 2 dec, 3 sc, hdc (10)

6) 2 dc in one loop, hdc, 6 ch, skip 2 loops, hdc, 2 dc in one loop,

hdc, 6 ch, skip 2 loops, sl st.
7) tie with connecting posts in a circle.- cut the thread, leave a 15
cm end
Add some filler to the top of the brush

4
FOREARM (2 pcs):

Watch the video: "Forearm".

Leave a 35 cm thread tail at the beginning (it will be needed for tying the
edge later). Cast on 9 VP, continue knitting in a spiral from the 2nd loop
from the hook:

1) 8 sc, 10 VP. (8)

2) inc, 6 sc, inc, 8 VP. (10)

3) 10 sc, 5 VP. (10)

4) 10 sc, 5 sc in a chain. (15)
5) 4 sc, dec, 9 sc. (14)
6) 14 sc (14)
7) 4 sc, dec, 8 sc. (13)
8) 13 sc (13)
9) 3 sc, dec, 8 sc. (12)
10) - 14) 12 sc (12)
15) 6 kills (6)- cut the thread

Return to the beginning of the forearm, using the thread that

you should have left at the beginning, tie the edge with slip
stitches. Do not cut off the rest of the thread, you will need it to
sew the hinge. Knit the second forearm.

ELBOW JOINT (2 PCS):

Watch Video 4: "Elbow Hinge" .

1) 5 sc in KA. (5)

2) 5 pr. (10)

3) - 4) 10 sc (10)- insert a 6 mm bead

5) 2 sc, 3 dec, 2 sc. (7)

5
6) 2 sc, 3 inc behind ZPP, 2 sc. (10)

7) – 8) 10 sc (10)- add some filler on top of the first bead, insert

the second 6 mm bead
9) 5 kills.

Tie the second hinge.

RIGHT SHOULDER:

Watch the video: "Right shoulder".

Leave a 30 cm tail at the beginning (for tying the edge). Cast on 6 VP, then from
the 2nd loop from the hook:

1) 5 pr, 8 VP. (10)

2) (sc, inc)*5, 8 VP. (15)
3) sc, (inc, 2 sc)*4, inc, sc, 8 VP. (20)
4) - 6) 20 sc (20)– put a marker
7) 2 sc, dec, 12 sc, dec, 2 sc. (18)
8) sc, dec, 12 sc, dec, sc (16)
9) 5 sc, dec, 2 sc, dec, 5 sc. (14)
10) 3 sc, inc, 6 sc, inc, 3 sc. (16)
11) - 16) 16 sc (16)
17) 4 sc, dec, 10 sc. (15)
Work 7 more sc, then continue from the new place:

18) 9 sc, 8 ch, skip 5 loops. (9)

19) 9 sc, 10 VP. (9)
20) Skip 1 loop, 7 sc.
21) ss in a circle, cut the thread.
Return to the beginning of the shoulder joint and tie the
edge of the opening with slip stitches.

. 6
LEFT SHOULDER:

Watch the video: "Left shoulder".

Leave a 30 cm tip at the beginning. Cast on 6 VP, then from the 2nd loop from
the hook:

1) 5 pr, 8 VP
2) (sc, inc)*5, 8 VP. (15)
3) sc, (inc, 2 sc)*4, inc, sc, 8 VP. (20)
4) - 6) 20 sc (20)– put a marker
7) 2 sc, dec, 12 sc, dec, 2 sc. (18)
8) sc, dec, 12 sc, dec, sc (16)
9) 5 sc, dec, 2 sc, dec, 5 sc. (14)
10) 3 sc, inc, 6 sc, inc, 3 sc. (16)
11) - 16) 16 sc (16)
17) 12 sc, dec, 2 sc. (15)
18) 10 sc, 8 ch, skip 5 loops. (10)
19) 9 sc, 10 VP. (9)
20) Skip 1 loop, 7 sc.
21) ss in a circle, cut the thread.

Return to the beginning of the shoulder joint and tie the

edge of the opening with slip stitches.

7
 legs
LEFT SHIN:

Watch the video: "Left Shin".

Cast on 4 VP, then from the 2nd loop from the hook:

1) 2 sc, 4 sc in the outer loop, 2 sc on the other side of the chain.

(8)– put a marker
2) inc, 2 sc, 2 inc, 3 sc. (11)
3) 5 sc, 2 inc, 4 sc. (13)
4) 13 sc (13)
5) 10 sc, dec, sc (12)
6) 9 sc, dec, sc. (11)
7) 11 sc (11)
8) 10 sc, (4 VP,along the chain: inc, 2 sc), sc (15)
9) 10 sc, (chain up: 2 sc inc), 5 sc. (19)
10) dec. 17 sc (18)
11) dec, 16 sc (17)
12) 10 sc, 2 dec, 3 sc. (15)
13) 9 sc, 2 dec, 2 sc. (13)
14) 8 sc, 2 dec, sc. (11)
15) 7 sc, 2 dec (9)
Cut 10 cm of wire, bend it 2.5 cm from one end and 0.5 cm from the
other end. Wrap it with a band-aid. Insert it into the foot, bend it at
the heel. Stuff it.
16) 7 sc, inc, sc. (10)
17) 10 sc (10)
18) 8 sc, inc, sc. (11)
19) 9 sc, inc, sc. (12)
20) 12 sc (12)
21) 9 sc, inc, 2 sc. (13)

8
22) 10 sc, inc, 2 sc. (14)
23) 14 sc (14)
24) 10 sc, inc, 3 sc. (15)
25) 9 sc, inc, 3 sc, inc, sc. (17)
26) 10 sc, inc, 3 sc, inc, 2 sc. (19)
27) - 31) 19 sc (19)- to fill
32) 11 sc, dec, 4 sc, dec. (17)
33) 15 sc, dec (16)
34) 16 sc (16)
35) 13 sc, 8 VP, skip 4 loops. (13)
36) 5 sc, inc, 5 sc, 10 VP. (12)
37) skip 1 loop before the chain, skip the chain of the previous
row, skip 1 loop after the chain, 10 sc, 12 VP. (10)

38) skip 1 loop before the chain, skip the chain of the previous
row, skip 1 loop after the chain, 8 sc. (8)
39) ss in a circle, cut the thread.- leave a 15 cm tip

RIGHT SHIN:

Watch the video: "Right Shin".

Cast on 4 VP, then from the 2nd loop from the hook:

1) 2 sc, 4 sc in the outer loop, 2 sc on the other side of the chain.

(8)– put a marker
2) inc, 2 sc, 2 inc, 3 sc. (11)
3) 5 sc, 2 inc, 4 sc. (13)
4) 13 sc (13)
5) 3 sc, dec, 8 sc. (12)
6) 3 sc, dec, 7 sc. (11)
7) 11 sc (11)

9
8) 4 sc, (4 VP,along the chain: inc, 2 sc), 7 sc (15)
9) 4 sc, (chain up: 2 sc inc), 11 sc. (19)
10) sc, dec, 16 sc (18)
11) dec, 16 sc (17)
12) 5 sc, 2 dec, 8 sc. (15)
13) 4 sc, 2 dec, 7 sc. (13)
14) 3 sc, 2 dec, 6 sc. (11)
15) 2 sc, 2 dec, 5 sc. (9)- insert the wire
16) 3 sc, inc, 5 sc. (10)
17) 10 sc (10)
18) 4 sc, inc, 5 sc. (11)
19) 5 sc, inc, 5 sc. (12)
20) 12 sc (12)
21) 5 sc, inc, 6 sc. (13)
22) 6 sc, inc, 6 sc. (14)
23) 14 sc (14)
24) 6 sc, inc, 7 sc. (15)
25) 5 sc, inc, 3 sc, inc, 5 sc. (17)
26) 6 sc, inc, 3 sc, inc, 6 sc. (19)
27) - 31) 19 sc (19)- to fill
32) 6 sc, dec, 4 sc, dec, 5 sc. (17)
33) 6 sc, dec, 9 sc. (16)
34) 16 sc (16)
35) 7 sc, 8 VP, skip 4 loops, 5 sc. (12)
36) inc, 5 sc, 10 VP, skip 1 loop before the chain, skip the chain of
the previous row, skip 1 loop after the chain, 4 sc. (11)

10
37) 6 sc, 12 VP, skip 1 loop before the chain, skip the chain of the
previous row, skip 1 loop after the chain, 3 sc. (9)

38) 5 sc.
39) ss in a circle, cut the thread.- leave a 15 cm tip

KNEE JOINT (2 PCS):

Watch the video: "Knee Hinge".

1) 6 sc in KA. (6)

2) 6 pr, ss, VP. (12)

3) - 4) 12 sc (12)
5) 3 sc, 3 dec, 3 sc. (9)- insert a 8 mm bead
6) - 7) 9 sc (9)
8) 3 sc, 3 inc, 3 sc. (12)
9) - 10) 12 sc (12)- add filler to rows 6-7, insert the second 8 mm
bead
11) 6 sc (6)– cut the thread, tighten the hole, hide the ends of the
threads.

Tie the second hinge.

LEFT HIP:

Watch the video: "Left hip".

Leave a 40 cm tip at the beginning. Cast on 7 VP, then from the 2nd loop from
the hook:

1) 6 pr, 10 VP. (12)

11
2) (sc, inc)*6, 10 VP. (18)
3) sc, (inc, 2 sc)*5, inc, sc, 10 VP. (24)
4) - 7) 24 sc, 10 VP. (24)
8) - 9) 24 sc (24)- put a marker
10) dec, 2 sc, dec, 14 sc, dec, 2 sc. (21)

11) (dec, sc)*2, 12 sc, dec, sc. (18)

12) 3 inc, 5 sc, inc, 6 sc, 3 inc (25)
13) 12 sc, inc, 5 sc, inc, 6 sc. (27)
14) - 15) 27 sc (27)
16) 7 sc, dec, 18 sc. (26)
17) 26 sc (26)
18) 7 sc, dec, 17 sc. (25)
19) 25 sc (25)
20) 13 sc, dec, 10 sc. (24)
21) 7 sc, dec, 15 sc. (23)
22) 23 sc (23)
23) 6 sc, dec, 4 sc, dec, 9 sc. (21)

24) 6 sc, inc, 14 sc. (22)

25) 12 sc, dec, 8 sc. (21)
26) 17 sc, dec, 2 sc. (20)
27) 12 sc, dec, 6 sc. (19)
28) 16 sc, dec, sc. (18)
29) 6 sc, dec, 10 sc. (17)
30) 10 sc, 8 VP, skip 4 loops, 3 sc. (13)

12
31) 9 sc, 10 VP, skip one loop before the chain, skip the chain
from the VP of the previous row, skip one loop after the chain, 2
sc. (11)
32) 8 sc, 12 VP, skip one loop before the chain, skip the chain
from the VP of the previous row, skip one loop after the chain,
sc. (9)
33) 7 sc.
34) ss in a circle, cut the thread.- leave a 15 cm tip

Return to the beginning and tie the edges of the hinge opening with
single crochets. DO NOT cut the remaining thread.

RIGHT HIP:

Watch the video: "Right hip".

Leave a 40 cm tip at the beginning. Cast on 7 VP, then from the 2nd loop from
the hook:

1) 6 pr, 10 VP. (12)

2) (sc, inc)*6, 10 VP. (18)
3) sc, (inc, 2 sc)*5, inc, sc, 10 VP. (24)
4) - 7) 24 sc, 10 VP. (24)
8) - 9) 24 sc (24)- put a marker
10) dec, 2 sc, dec, 14 sc, dec, 2 sc. (21)

11) dec, 13 sc, (dec, sc)*2. (18)

12) 3 inc, 6 sc, inc, 5 sc, 3 inc (25)

13) 7 sc, inc, 5 sc, inc, 11 sc. (27)
14) - 15) 27 sc (27)
16) 21 sc, dec, 4 sc. (26)
17) 26 sc (26)

13
18) 21 sc, dec, 3 sc. (25)
19) 25 sc (25)
20) 15 sc, dec, 8 sc. (24)
21) 20 sc, dec, 2 sc. (23)
22) 23 sc (23)
23) 14 sc, dec, 4 sc, dec, sc. (21)
24) 19 sc, inc, sc. (22)
25) 14 sc, dec, 6 sc. (21)
26) 9 sc, dec, 10 sc. (20)
27) 13 sc, dec, 5 sc. (19)
28) 8 sc, dec, 9 sc. (18)
29) 16 sc, dec (17)
30) 12 sc, 8 VP, skip 4 loops, sc. (13)
31) 11 sc, 10 VP, skip one loop before the chain, skip the chain
from the VP of the previous row, skip one loop after the chain.
(10)
32) 10 sc, 12 VP, skip one loop before the chain, skip the chain
from the VP of the previous row, skip one loop after the chain.
(9)
33) 8 sc.
34) ss in a circle, cut the thread.- leave a 15 cm tip

Return to the beginning and tie the edges of the hinge opening with
single crochets. DO NOT cut the remaining thread.

HIP JOINT INSERT (2 PCS):

1) 20 VP, ss in first loop, 20 sc around, ss, VP. (20)

2) 20 sc, ss, cut thread. (20)- sew the insert into the hip hinge
hole

14
 torso
torso bottom:

Watch the video: "Body Bottom"

1) 4 VP, from the second loop from the hook we knit: 3 sc, VP, turn. (5)

2) 3 sc, ch, turn. (3)

3) 3 sc with a common top, VP, turn. (1)
4) pr, 2 VP, turn. (2)
5)in one loop: (dc, sc),in one loop: (sc, dc), 2 VP, turn.
(4)
6)in one loop: (dc, 2 sc), dec,in one loop: (2 sc, dc), 12 ch, 3 sc in
front, 12 ch. (10)
7)in one loop: (dc, 2 sc), sc, 3 sc with a common top, sc,in one
loop: (2 sc, dc), 14 ch, 3 sc in front, 14 ch. (12)

8)in one loop: (dc, 2 sc), 3 sc, skip 1 loop, 3 sc,in one loop: (2 sc,
dc), 16 ch, 3 sc in front, 16 ch. (15)
9)in one loop: (dc, 2 sc), 4 sc, dec, 4 sc,in one loop: (2 sc, dc), 16
ch, 3 sc in front, 16 ch. (18)
10)in one loop: (dc, 2 sc), 5 sc, 3 sc with a common top, 5 sc,in
one loop: (2 sc, dc), 16 ch, 3 sc in front, 16 ch. (20)

11)in one loop: (dc, 2 sc), 7 sc, skip 1 loop, 7 sc,in one loop: (2 sc,
dc), 16 VP, 3 sc with a common top, 16 VP. (21)

12)in one loop: (dc, 2 sc), 8 sc, dec, 8 sc,in one loop: (2 sbn, dc),
16 VP, 3 sbn in one loop, 16 VP. (26)
13)in one loop: (dc, 2 sc), 9 sc, 3 sc with a common top, 9 sc,in
one loop: (2 sc, dc), 14 ch, inc, sc, inc, 14 ch. (30)

15
14)in one loop: (dc, 2 sc), 11 sc, skip 1 loop, 11 sc,in one loop: (2
sc, dc), 12 ch, inc, 3 sc, inc, 12 ch. (35)
15)in one loop: (dc, 2 sc), 7 sc, (dec, 3 sc)*2, dec, 7 sc,in one loop:
(2 sc, dc), 8 ch, inc, 5 sc, inc, 8 ch, ss in first loop of this row, ch.
(38)
16) 9 sc, dec, 7 sc, dec, 9 sc, 8 sc in a chain, sc, 7 ss behind the ZPP, sc,
8 sc in a chain, ss, VP. (52)

17) 8 sc, dec, 7 sc, dec, 15 sc, 11 ss behind ZPP, 7 sc, ss, VP. (50)

18) (7 sc, dec)*2, 12 sc, 15 ss behind ZPP, 5 sc, ss, VP. (48)

19) 6 sc, dec, 7 sc, dec, 9 sc, 19 ss behind ZPP, 3 sc, ss, VP. (46)

20) 5 sc, dec, 7 sc, dec, 8 sc, 19 ss behind ZPP, 3 ss, ss, VP. (44)- cut the
thread

Tie the edges of the leg holes with single crochet stitches. To do
this, secure the thread to the 4th row and follow the tying pattern
shown in the video.

HIP JOINT :
Watch the video: "Hip Receiver" Knitting in a
circle:
1) 6 sc in KA, ss, VP. (6)
2) 6 pr, ss, VP. (12)
3) (inc, sc)*6, ss, VP. (18)
4) (inc, 2 sc)*6, sl st, VP. (24)

5) (inc, 3 sc)*6, ss, VP. (30)

6) 28 sc, VP, turn. (28)
7) 28 sc, 2 VP, ss in the first row of this row. (28)- cut the thread,
leave 40 cm of thread for sewing.
Knit the second hinge receiver. Sew the hinge receivers to the
pelvic part of the body.

16
SHOULDER HOOK (2 PCS):
Watch the video: "Shoulder Receiver Hinge"
1) 6 sc in KA, ss, VP. (6)- Do not tighten the KA too much so that the elastic
band can pass through it later
2) 6 pr, ss, VP. (12)
3) (inc, sc)*6, ss, VP. (18)
4) (inc, 2 sc)*6, sl st, VP. (24)
5) - 6) 24 sc, sl st (24)- cut the thread, leave a 30 cm end for
sewing

TORSO UPPER:

Watch the video: "TORSO UPPER 1,2,3"

Cut 2 pieces of thread 40 cm long, they will be needed later for
tying the shoulder holes.
1) 10 VP, from the 2nd loop from the hook: inc, 7 sc, 3 sc in the outer
loop, 8 sc on the other side of the chain. (20)- put a marker

2) 2 inc, 7 sc, 3 inc, 7 sc, inc (24)

3) (sc, inc)*2, 7 sc, (sc, inc)*2, 3 VP, skip 2 loops, 8 sc, 3 VP, skip 2
loops. (27)
The beginning of the 4th row has moved forward by one loop, because
we skipped 2 loops at the end of the previous row.

4) sc, inc, 2 sc, inc, 8 sc, inc, 2 sc, inc, sc, 4 sc in a chain, 8 sc, 4 sc
in a chain. (38)
5) - 6) 38 sc (38)
7) 26 sc,for the protection of consumer rights: (inc, 2 sc, inc), ss for PPP,for the protection of consumer rights: (inc, 2 sc,

inc), 3 sc. (42)

8) - 9) 32 sc, ss for PPP, 9 sc. (42)

10) 26 sc, (dec, 2 sc, dec), ss behind PPP, (dec, 2 sc, dec), 3 sc. (38)

17
11) 2 sc, inc, 17 sc, inc, 5 sc,for the protection of consumer rights: (inc, 2 sc, inc), ss for PPP,for the

protection of consumer rights: (inc, 2 sc, inc), 3 sc. (44)

12) - 13) 34 sc, ss for PPP, 9 sc. (44)

14) 28 sc, (dec, 2 sc, dec), ss behind PPP, (dec, 2 sc, dec), 3 sc. (40)

15) 3 sc, inc, 18 sc, inc, 6 sc,for the protection of consumer rights: (inc, sc, inc), ss for PPP,for the protection

of consumer rights: (inc, sc, inc), 4 sc. (46)

16) 36 sc, ss for PPP, 9 sc. (46)

17) 31 sc, (dec, sc, dec), ss behind PPP, (dec, sc, dec), 4 sc. (42)

18) 28 sc,for the protection of consumer rights: (inc, sc, inc, 2 sc, inc), 2 dc for PPP,for the protection of consumer

rights: (inc, 2 sc, inc, sc, inc). (48)

19) 28 sc, inc, 8 sc, 2 dc for PPP, 8 sc, inc (50) Then

knitting will continue without a marker.

20) 12 VP, skip 6 loops, 16 sc, 12 VP, skip 6 loops, 10 sc, dec, 9 sc.
(36)
21) 14 VP, skip 1 loop before the chain, skip the chain itself, skip
1 loop after the chain, 14 sc, 14 VP, skip 1 loop before the chain,
skip the chain itself, skip 1 loop after the chain, 9 sc, sl st behind
the PP, 8 sc. (32)
22) 16 VP, skip 1 loop before the chain, skip the chain itself, skip
1 loop after the chain, 12 sc, 16 VP, skip 1 loop before the chain,
skip the chain itself, skip 1 loop after the chain, 8 sc, sl st behind
the PP, 8 sc. (29)
23) 16 VP, 12 sc on the back, 16 VP, 8 sc, ss behind PPP, 7 sc, inc. (30)

24) 14 VP, inc, 10 sbn, inc, 14 VP, inc, 7 sbn, ss for PPP, 8 sbn, inc. (34)

25) 12 VP, inc, 12 sc, inc, 12 VP, inc, 6 sc, dec, ss behind PPP, dec, 8 sc.
(35)
26) 6 VP, 16 sbn, 6 VP, 8 sbn, 3 ss for PPP, 8 sbn. (35)- put a
marker

18
27) 6 sc in a chain, 16 sc, 6 sc in a chain, sc,for the protection of consumer rights: (sc,
5 hdc, 3 hdc in one loop with a common top), 3 ss for pp,for the protection of
consumer rights: (3 hdc in one loop with a common top, 5 hdc, sc), sc. (47)

28) sc, 2 dec, 18 sc, 2 dec, 2 sc, (7 sc along the collarbone, capturing half
loops from the previous row + half loops under them), 3 ss, (7 sc along the
collarbone, capturing half loops from the previous row + half loops under
them), sc. (43)

29) 2 dec, 16 sc, 2 dec, 9 sc, skip 1 loop, 8 sc, dec. (37)- move the
marker to the end of this row
30) dec, 14 sc, 2 dec, 15 sc, dec. (33)

31) dec, 12 sc, 2 dec, 12 sc, dec. (29)- move the marker to the end of
this row

32) 2 dec, 8 sc, 3 dec, 9 sc, dec. (23)

33) Skip 1 loop, dec, 6 sc, dec, skip 1 loop, dec, 9 sc.
(18)
Tie the shoulder holes with slip stitches using the pieces of
thread you should have prepared at the beginning. Then sew on
the shoulder hinge receivers. Stuff the body. Soak the hinge
receivers in varnish, let dry. Secure the arms as shown in the
video. Continue:
34) - 38) 18 sc (18)
Stuff the shoulders and neck tightly. Insert a 10 mm bead.

39) (dec, sc)*6. (12)

40) 6 dec, cut the thread, do not tighten the hole.

19
 HEAD
Watch the video: "Head".
1) 6 sc in KA. (6)– do not tighten the ring too much, so that 2 rubber bands
can pass through it, put a marker

2) 6 pr. (12)

3) (inc, sc)*6. (18)

4) - 5) 18 sc (18)
6) For PPP: 9 sc, (3 VP, 2 sc in a chain), 9 sc. (20)
7) 8 sc, inc,up the chain: (sc, inc), inc, sc, inc, 8 sc. (26)

- row 5

- row 6

- row 7

8) inc, 10 sc, inc, 2 sc, inc, 10 sc, inc (30)

9) sc, inc, 10 sc, dec, 2 sc, dec, 10 sc, inc, sc. (30)
10) 2 sc, inc, 25 sc, inc, sc. (32)
11) (sc, inc)*2, 25 sc, inc, sc, inc (36)
12) sc, inc, 2 sc, inc, 27 sc, inc, 2 sc, inc (40)

20
13) 20 sc, (3 VP, in a chain: sc, hdc), skip 1 loop, 19 sc. (41)

14) 20 sc, along the nose: (2 sc up the chain, 2 sc down), 19 sc.

(43)

- row 12

- row 13

- row 14

15) 2 sc, inc, 18 sc, dec, 18 sc, inc, sc. (44)

16) 22 sc, skip 1 loop, 21 sc. (43)
17) 16 sc, 2 dec, 4 sc, 2 dec, 15 sc. (39)

18) 39 sc (39)
19) 15 sc,for the protection of consumer rights: (3 sc, inc), 2 sc,for the protection of consumer rights: (inc, 3 sc), 14 sc. (41)

20) 18 sc, dec, 2 sc, dec, 17 sc. (39)

21) 39 sc (39)
22) 3 sc, dec, 30 sc, dec, 2 sc. (37)

23) 37 sc (37)
24) 18 sc, dec, 17 sc. (36)
25) (dec, 4 sc)*6. (30)

26) (dec, 3 sc)*6. (24)- to fill

27) (dec, 2 sc)*6. (18)- insert a button
28) (dec, sc)*6. (12)- cut the thread, leave 20 cm
We leave the head in this state for now.

21
 Watch the video "EARS".
LEFT EAR:

1) 4 VP, from the 2nd loop we knit: inc, dc,in one loop: (2 dc, sc).

RIGHT EAR:

1) 4 VP, from the 2nd loop we knit:in one loop: (sc, 2 dc), dc, inc.

Count 9 loops from the central loop under the nose to the right and left
and sew on the ears. Soak the head with varnish.

22
 FACE, HAIR
Watch the video: "FACE" and the video: "HAIR".

MATERIALS:

floss 2 colors: black and brown;

scissors;
fabric marker;
needles;

ka twisting

You can design your face and hair in a way that is different from the
one shown in the video.

23
 IMPREGNATION, TINTING, ASSEMBLY
Watch the video: "IMPREGNATING", "TINTING", "ASSEMBLY".

MATERIALS:
PVA glue;
flat brush;
scissors;
dry pastel raspberry color hat
elastic 1 mm - 60 cm sewing
needles and a long yoke soft toys.

First, we soak the parts in a solution of PVA glue and water. The
proportion of the solution is approximately 1 part PVA glue and 5
parts water. Let it dry completely before applying the tint.

You can tone it at your own discretion. I prefer to highlight all

the edges of the details so that the work is not dull.

24
25
 CONTACTS
Instagram -hps://www.instagram.com/julja_myzina/
Website -hps://juliaslovelydolls.nethouse.ru/ Boost -
hps://boosty.to/julja.myzina Vkontakte -hps://vk.com/
myzinadolls E-mail [email protected] WhatsApp -
+7 (918) 955-40-24

YouTube -hps://www.youtube.com/channel/UCiEhsYj1BNTSNhLoAffq07Q

26