HTPP Pipes

Technical Datasheet
Applications Mechanical and physical characteristics

HTPP pipes and fitings are intended to be used in:

• Building sewage systems. PP-H (polypropylene
Material
homopolymer)
• House sewage system
Three-layer composite pipe
• Apartment buildings Pipe structure
PPH-PPM-PPH
• Residential and commercial buildings
pipes (Ø32-Ø50) - 0.9 g/cm3 ,
• Hotels and hospitals Density pipes (Ø63-Ø160) - 0.8 g/cm3
• Schools, libraries and reading rooms fitting - 0.9 g/cm3
• Other buildings where reduced noise is required or desirable Short-term up 95 °C,
Resistance temperature
long-term up 60 °C
Linear elongation coefficient 0.12 mm/m °C
Product description Chemical resistance pH 2 - pH 12
Modulus of elasticity 1300 - 2000 MPa
Production program Peštan HT (PP) pipes for sewage sys- Push-fit sockets with inserted
tems inside buildings includes pipes produced from high Jointing method
rubber ring - resistant to
leakage up to pressure of
quality polypropylene homopolymer (PP-H). Peštan HTPP
0.5bar
pipes are made in technology of three-layer composite
Application category B
pipes according to the requirements of EN 1451, in diameters Application category
(instalation in buildings)
from Ø32 to Ø160 together with complete range of fitings. Fire classification B2 - normal flammability
Sound insulation level 24 dB(A) sound insulation Level II
HTPP pipes have sound insulation level II (DIN 4109 stan-
dards). Level II is the middle sound insulation level and is up
to 25 decibels. Our HTPP pipe program has, according to
Chemical resistance
tests at the Fraunhofer Institute - Germany, a sound insula-
High chemical resistance to a large number of compounds
tion level of up to 24 decibels (at a fluid flow of 2l/s DN110). (pH 2 - pH 12).*
*Plastic pipes and fittings - Combined chemical-resistance
* LSC,A [dB(A)] Fraunhofer test report P-BA 95/2016e classification table ISO/TR 10358.
** The measurement results with commercial pipe clamp,
Product Availability
Supported standards: EN 1451, EN 1411, EN 14366, EN 681, EN
12056. Single socket and double socket pipes.
Available in lengths from 250 to 4000 mm.
Diameter from ø32 to ø160 mm.
Fittings: bends (15°, 30°, 45°, 67.5°, 87.5°), T-branches (45°,
87.5°), reducers, double branch, ventilation branch, excentric
reducer, slip coupler, double socket, end cap.

EN 1451 s20

DN32 DN40 DN50 DN75 DN90 DN110 DN125 DN160

Dem (mm) 32 40 50 75 90 110 125 160

e (mm) min 1.8 1.8 1.8 1.9 2.2 2.7 3.1 3.9

d3 (mm)min 38.6 49.6 59.6 84.5 99.5 120.5 137.5 174.3

B (mm)min 5 5 5 5 5,0 6 7 9
A (mm)min 24 26 28 33 34,0 36 38 41
L (mm) 250, 500, 100, 1500, 2000, 2500, 3000, 3500 i 4000
 Technical Assistance

Our technical and engineering team is supported and advised by European institutes. For more information about products
please contact PEŠTAN technical support or regional salesman.

BELNIIS - Belarus KIWA - Netherland

VUPS - Czech Republic BELNIIS - Belarus IMS - Serbia GOST R - Russia

MPA - Germany IGH - Croatia