CREATING TOMORROW'S SOLUTIONS
SLM 8167 IN
Siliconized Powder Defoamer
SLM 8167 IN is a mixture of silicone defoamer and polyglycols on an inorganic carrier
Technical data
General Characteristics
Property Condition Value Method
Bulk Density 23 °C approx. 600 Kg/m3 -
Solid content (@150℃) - approx. 97 wt. % -
Appearance - Free flowing powder -
These figures are only intended as a guide and should not be used in preparing specifications.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability
whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for
an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence.
This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Applications
Dry mix cementitious and gypsum system
Processing details
Recommended for application in dry mix which are blended with water before application. The addition of
SLM 8167 In results in foam reduction, specifically aqueous pastes, or masses with very low air content. SLM
8167 IN doesn’t hamper any other properties of mortar and other pastes and mases.
Recommended dose is 0.1- 1% with respect to the total mass.
Packaging and storage
Storage
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified
on the label does not necessarily mean that the product is no longer usable. In this case however, the
properties required for the intended use must be checked for quality assurance reasons.
Safety notes
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are
available on request from WACKER subsidiaries or may be printed via WACKER web site
http://www.wacker.com.
For technical, quality or product safety questions, please contact:
Wacker Metroark Chemicals Pvt. Ltd.,
Diamond Harbour Road, Chandi, 24 Parganas (S)
West Bengal 743 503, India
[email protected], www.wacker.com
The data presented in this medium are in accordance with the present sate of our knowledge but do not absolve the user from carefully checking all supplies immediately on receipt. We
reserve the right to alter product constants within the scope of technical process or new developments. The recommendations are made in this medium should be checked by
preliminary trials because of conditions during processing over which we have no control, especially where other companies ’ raw materials are also being used. The information
provided by us does not absolve the user from the obligation of investigating the possibility of infringement of third parties’ rights and if necessary, clarifying the position.
recommendations for use do not constitute a warranty, either express or implied, of the fitness or suitability of the product for a particular purpose.
