RUT241

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice.
 DATASHEET // RUT241

HARDWARE

FRONT VIEW

Power socket Mobile signal

strength indication
LEDs
Mobile network LAN port WAN port
type LEDs

Power LED SIM slot LAN LED WAN LED

BACK VIEW

Reset button

Wi-Fi antenna connector Mobile MAIN antenna

(RP-SMA female) connector (SMA female)

Mobile AUX antenna

connector (SMA female)

POWER SOCKET PINOUT

Power / Red wire Ground / Black wire

Input / Green wire Output / White wire

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 2
 DATASHEET // RUT241

FEATURES

MOBILE
Mobile module 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps

3GPP Release Release 10/11 depending on the hardware version

IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI),
Status
SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
SMS
scheduled SMS, SMS autoreply, SMPP

USSD Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list Operator black/white list (by country or separate operators)

Multiple PDN Possibility to use different PDNs for multiple network access and services

Band management Band lock, Used band status display

SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN

APN Auto APN

Bridge Direct connection (bridge) between mobile ISP and device on LAN

Passthrough Router assigns its mobile WAN IP address to another device on LAN

WIRELESS
Wireless mode 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes,
Wi-Fi security
client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect

SSID/ESSID SSID stealth mode and access control based on MAC address

Wi-Fi users Up to 50 simultaneous connections

Wireless Connectivity Features Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)

Wireless MAC filter Whitelist, blacklist

Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information.

ETHERNET
WAN 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX

LAN 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP,
Network protocols
Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall Port forward, traffic rules, custom rules

Firewall status page View all your Firewall statistics, rules, and rule counters

View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed,
Ports management
and so on

Network topology Visual representation of your network, showing which devices are connected to which other devices

Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication,
Hotspot internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations,
user management, 9 default customisable themes and optionality to upload and download customised hotspot themes

DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards

QoS / Smart Queue

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
Management (SQM)

DDNS Supported >25 service providers, others can be configured manually

DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS

Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load balancing Balance Internet traffic over multiple WAN connections

SSHFS Possibility to mount remote file system via SSH protocol

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 3
 DATASHEET // RUT241

SECURITY
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login
Authentication
attempts block, time-based login blocking, built-in random password generator

Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
Attack prevention
SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN Port and tag-based VLAN separation

Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number

WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control Flexible access control of SSH, Web interface, CLI and Telnet

SSL certificate generation Let's encrypt support

VPN
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods

DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
OpenVPN Encryption AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB
192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256,
AES-256-OFB 256, AES-256-CBC 256

XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8,
IPsec
AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN Method of building scalable IPsec VPNs

SSTP SSTP client instance support

ZeroTier ZeroTier VPN client support

WireGuard WireGuard VPN client and server support

Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support

OPC UA
Supported modes Client, Server

Supported connection types TCP

MODBUS
Supported modes Server, Client

Supported connection types TCP

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS
Custom registers
TCP Client functionality

8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB,
Supported data formats
BADC), HEX, ASCII

DATA TO SERVER
Protocol HTTP(S), MQTT, Azure MQTT, Kinesis

Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting,
Data to server
allowing scripts to utilize the router's Data to server feature

MQTT GATEWAY
Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3
Supported modes Station, Outstation

Supported connection TCP

DLMS
DLMS Support DLMS - standard protocol for utility meter data exchange

Supported modes Client

Supported connection types TCP

SECURITY

Teltonika Networks Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more informa-
Web API (beta) support tion, please refer to this documentation: https://developers.teltonika-networks.com

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 4
 DATASHEET // RUT241

MONITORING & MANAGEMENT

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability
WEB UI
notifications, event log, system log, kernel log, Internet status

FOTA Firmware update from server, automatic notification

SSH SSH (v1, v2)

SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT MQTT Broker, MQTT publisher

SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection

JSON-RPC Management API over HTTP/HTTPS

RMS Teltonika Remote Management System (RMS)

IoT PLATFORMS
Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection
Cumulocity
Type, Operator, Signal Strength

Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which
Azure IoT Hub allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that
allows zero-touch device provisioning to IoT Hubs

SYSTEM CHARACTERISTICS
CPU Mediatek, 580 MHz, MIPS 24KEc

RAM 128 MB, DDR2

FLASH storage 16 MB, SPI Flash

FIRMWARE / CONFIGURATION
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA Update FW

RMS Update FW/configuration for multiple devices at once

Keep settings Update FW without losing current configuration

Factory settings reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's
configuration

FIRMWARE CUSTOMISATION
Operating system RutOS (OpenWrt based Linux OS)

Supported languages Busybox shell, Lua, C, C++

Development tools SDK package with build environment provided

You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements
GPL customization
in our firmware to fit your or your clients’ needs

Development tools The Package Manager is a service used to install additional software on the device

INPUT / OUTPUT
Input 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events Email, RMS, SMS

I/O juggler Allows to set certain I/O conditions to initiate event

POWER
Connector 4-pin industrial DC power socket

Input voltage range 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt
PoE (passive)
standards, Mode B, 9 - 30 VDC

Power consumption < 6.5 W Max

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 5
 DATASHEET // RUT241

PHYSICAL INTERFACES
Ethernet 2 x RJ45 ports, 10/100 Mbps

I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder

Power 1 x 4-pin power connector

Antennas 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors

Reset Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION
Casing material Aluminium housing, plastic panels

Dimensions (W x H x D) 83 x 25 x 74 mm

Weight 125 g

Mounting options DIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT
Operating temperature -40 °C to 75 °C

Operating humidity 10% to 90% non-condensing

Ingress Protection Rating IP30

REGULATORY & TYPE APPROVALS

Regulatory CE, UKCA, ANRT, Kenya, ICASA, FCC, IC, PTCRB, NOM, RCM, KC, Giteki, IMDA, E-mark, CB, UL/CSA Safety, RoHS, REACH, R118

Operator AT&T, Verizon, T-Mobile, Uscellular

EMC EMISSIONS & IMMUNITY

EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019
Standards EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
Final Draft EN 301 489-52 V1.2.0

ESD EN 61000-4-2:2009

Radiated Immunity EN IEC 61000-4-3:2020

EFT EN 61000-4-4:2012

Surge Immunity
EN 61000-4-5:2014 + A1:2017
(AC Mains Power Port)

CS EN 61000-4-6:2014

DIP EN 61000-4-11:2020

RF

EN 300 328 V2.2.2

EN 301 511 V12.5.1
Standards EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1

SAFETY
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
Standards CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1, Ed. 3 dated December 13, 20, CAN/CSA C22.2 No. 62368-1:19

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 6
 DATASHEET // RUT241

STANDARD PACKAGE*

• Router RUT241
• 9 W PSU
• 2x Mobile antennas (swivel, SMA male)
• 1x Wi-Fi antenna (swivel, RP-SMA male)
• Ethernet cable (1.5 m)
• SIM Adapter kit
• QSG (Quick Start Guide)
• Packaging box

ROUTER RUT241 9 W PSU 2X MOBILE ANTENNAS (SWIVEL,

SMA MALE)

1X WI-FI ANTENNA (SWIVEL, RP-SMA ETHERNET CABLE (1.5 M) SIM ADAPTER KIT
MALE)

QSG

* Standard package contents may differ based on standard order codes.

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 7
 DATASHEET // RUT241

CLASSIFICATION CODES
HS Code: 851762
HTS: 8517.62.00

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS
HARDWARE VERSION SUPPORTED FREQUENCIES STANDARD ORDER CODE / PACKAGE CONTAINS

RUT241000000 / Standard package with EU PSU

RUT241 *0**** 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A RUT241001000 / Standard package with UK PSU
Europe1, The Middle East, 3G: B1, B8 RUT241004000 / Standard package with Power cable with 4-way
Africa, Thailand 2G: B3, B8 screw terminal
RUT241002030 / Mass packing code

4G (LTE-FDD): B1, B3, B5, B7, B8, B20

RUT241 *1**** RUT241010000 / Standard package with EU PSU
4G (LTE-TDD): B40
Europe1, The Middle East, RUT241011000 / Standard package with UK PSU
3G: B1, B5, B8
Africa RUT241012030 / Mass packing code
2G: B3, B8

4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, RUT241030000 / Standard package with EU PSU
RUT241 *3**** B12, B13, B18, B19, B20, B25, B26, B28 RUT241034000 / Standard package with Power cable with 4-way
Global1 4G (LTE-TDD): B38, B39, B40, B41 screw terminal
3G: B1, B2, B4, B5, B6, B8, B19 RUT241033000 / Standard package with Universal PSU
2G: B2, B3, B5, B8 RUT241038000 / Standard package with US PSU
RUT241032030 / Mass packing code

4G (LTE-FDD): B1, B3, B5, B7, B8, B28

RUT241 *6**** RUT241065000 / Standard package with AU PSU
4G (LTE-TDD): B40
Australia, New RUT241063000 / Standard package with Universal PSU
3G: B1,B5, B8
Zealand, Taiwan RUT241062030 / Mass packing code
2G: B3, B5, B8

4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28 RUT241070000 / Standard package with EU PSU
RUT241 *7**** 4G (LTE-TDD): B40 RUT241073000 / Standard package with Universal PSU
Latin America 3G: B1, B2, B4, B5, B8 RUT241075000 / Standard package with AU PSU
2G: B2, B3, B5, B8 RUT241072030 / Mass packing code

4G (LTE-FDD): B1, B3, B8, B18, B19, B26

RUT241 *8**** RUT241087000 / Standard package with JP PSU
4G (LTE-TDD): B41
Japan RUT241082030 / Mass packing code
3G: B1, B6, B8, B19

4G (LTE-FDD): B2, B4, B5, B12,

RUT241 *9**** RUT241098000 / Standard package with US PSU
B13, B14, B66, B71
North America2 RUT241092030 / Mass packing code
3G: B2, B4, B5

The price and lead-times for region (operator) specific versions may vary. For more information please contact us.
1 - Regional availability - excluding Russia & Belarus
2 - For more detailed information about certified carriers, visit our Wiki page

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 8
 DATASHEET // RUT241

RUT241 SPATIAL MEASUREMENTS

MAIN MEASUREMENTS
W x H x D dimensions for RUT241:
Device housing*: 83 x 25 x 74 mm
Box: 173 x 71 x 148 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of RUT241 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of RUT241 and its components as seen from the right side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 9
 DATASHEET // RUT241

FRONT VIEW
The figure below depicts the measurements of RUT241 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of RUT241 and its components as seen from the back panel side:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 10
 DATASHEET // RUT241

MOUNTING SPACE REQUIREMENTS

The figure below depicts an approximation of the device's dimensions when cables and antennas are attached:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 11
 DATASHEET // RUT241

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

Copyright © 2024, UAB TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by UAB TELTONIKA NETWORKS without prior notice. 12