Gulf Harmony AW
High performance anti-wear hydraulic oil
Product Description
Gulf Harmony AW series are high performance anti-wear hydraulic oils developed for high pressure hydraulic systems
operating under moderate to severe conditions in mobile and industrial service. These oils are formulated with high
quality base oils and carefully selected performance additives to provide excellent protection against oxidation
degradation, rust & corrosion and wear. They also possess superior foam control, water separation and rapid air release
properties. The lower viscosity grades (ISO 15 through 100) are formulated with field proven thermally stable zinc based
anti-wear additive system and the higher viscosity grades (ISO 150 through 460) are based on ashless anti-wear
additive system They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP,
AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, FIVES CINCINNATI
(Former MAG IAS, LLC) & Eaton (Vickers).
Features & Benefits
Excellent thermo-oxidative stability controls the formation of sludge & varnish and improves oil life.
Exceptional anti-wear property results in longer pump and component life and reduces costs.
Superior demulsibility helps in faster separation of water from oil and resists formation of emulsions.
Special rust & corrosion inhibitors protect multi-metallurgy components even in presence of moisture.
Rapid air release property minimises chances of pump cavitation leading to trouble free operations.
Compatible with multi-metals and sealing materials commonly used in hydraulic systems.
Applications
ISO VG 15 through VG 100
Hydraulic systems operating under moderate to severe conditions in mobile and industrial service.
Older hydraulic systems where leakage is a problem and a cost-effective hydraulic oil providing all-round protection
is required.
Mobile hydraulic fluid power transmission systems and general machine lubrication.
ISO VG 150 through VG 460
Recommended for a wide variety of following industrial applications requiring anti-wear type of oils:
Circulating oil systems
Plain and rolling element bearings
Gear sets
General Machine lubrication
Specifications, Approvals & Typical Properties
Refer next page
Properties mentioned are typical only and minor variations, which do not affect product performance, are expected to arise in normal manufacturing processes. Please follow equipment
manufacturer’s recommendations for performance level and viscosity grade. The Safety Data Sheet for this product is available from your nearest Gulf Distributor. Please consult our local
representative if any further information is required.
The information contained herein is believed to be correct at the time of publication and may be subject to modification from time to time. It is the user's responsibility to verify that this data sheet is
current prior to using the product. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of products. Gulf Oil International reserves the right to
modify and change its products and specifications without prior notice.
This data sheet has been issued by us in English language only. In the event of any discrepancy between the English language version and any other language version, the English language
version shall prevail.
www.gulfoilltd.com
ISO Viscosity grades 15 22 32 46 68 100
Specifications
DIN 51524 Part 2-HLP X X X X X X
AFNOR NFE 48-603 (HM), ISO 11158 HM X X X
Eaton (Vickers) M-2950-S, M-2952-S, I-286-S X X X
FIVES CINCINNATI (Former MAG IAS, LLC) P-68 P-70 P-69
Denison HF-0, HF-1, HF-2 X X X
Typical Properties
Test Parameters ASTM Method Typical Values
Viscosity @ 40 ºC, cSt D 445 15 22 32 46 68 100
Viscosity Index D 2270 97 98 100 100 99 97
Flash Point, ºC D 92 164 186 202 210 218 230
Pour Point, ºC D 97 -24 -24 -24 -24 -24 -21
Density @ 15 ºC, Kg/l D 1298 0.858 0.865 0.87 0.874 0.881 0.886
Rust Test D 665A/B Pass Pass Pass Pass Pass Pass
Emulsion Test @ 54 ºC Pass Pass Pass Pass Pass -
D 1401
30 minutes max @ 82 ºC - - - - - Pass
Foam Test, foam after 10 minutes of
D 892 Nil Nil Nil Nil Nil Nil
settling for all sequences
Turbine Oil Stability Test, hrs D 943 2000+ 2500+ 2000+
FZG, fail load stage, minimum DIN 51354 Part II - - 11 11 11 11
ISO Viscosity grades 150 220 320 460
Specifications
DIN 51524 Part 2-HLP X
AFNOR NFE 48-603 (HM) X
ISO 11158 HM X
Typical Properties
Test Parameters ASTM Method Typical Values
Viscosity @ 40 ºC, cSt D 445 150 220 320 460
Viscosity Index D 2270 96 96 95 95
Flash Point, ºC D 92 246 256 266 280
Pour Point, ºC D 97 -18 -15 -15 -12
Density @ 15 ºC, Kg/l D 1298 0.89 0.894 0.898 0.902
Rust Test D 665A/B Pass Pass Pass Pass
Emulsion Test
@ 82 ºC D 1401 Pass Pass Pass Pass
30 minutes max
Foam Test, foam after 10 minutes of
D 892 Nil Nil Nil Nil
settling for all sequences
Turbine Oil Stability Test, hrs D 943 1500+ 1000+
FZG, fail load stage, minimum DIN 51354 Part II 11 11 11 11
June 2024
Properties mentioned are typical only and minor variations, which do not affect product performance, are expected to arise in normal manufacturing processes. Please follow equipment
manufacturer’s recommendations for performance level and viscosity grade. The Safety Data Sheet for this product is available from your nearest Gulf Distributor. Please consult our local
representative if any further information is required.
The information contained herein is believed to be correct at the time of publication and may be subject to modification from time to time. It is the user's responsibility to verify that this data sheet is
current prior to using the product. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of products. Gulf Oil International reserves the right to
modify and change its products and specifications without prior notice.
This data sheet has been issued by us in English language only. In the event of any discrepancy between the English language version and any other language version, the English language
version shall prevail.
www.gulfoilltd.com
