Scribd
Upload
76 views1 page

6SL3210-5BB21-5UV1 Datasheet en

The SINAMICS V20 is a variable frequency drive with a rated power of 1.50 kW and operates on a single-phase AC input voltage of 200-240 V. It features a range of ambient conditions for operation and storage, with a maximum operating temperature of 60 °C and a relative humidity of 95%. The drive supports various communication protocols, including USS and Modbus RTU, and includes multiple digital and analog inputs and outputs.

Uploaded by

manishfreefire465
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views1 page

6SL3210-5BB21-5UV1 Datasheet en

The SINAMICS V20 is a variable frequency drive with a rated power of 1.50 kW and operates on a single-phase AC input voltage of 200-240 V. It features a range of ambient conditions for operation and storage, with a maximum operating temperature of 60 °C and a relative humidity of 95%. The drive supports various communication protocols, including USS and Modbus RTU, and includes multiple digital and analog inputs and outputs.

Uploaded by

manishfreefire465
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Data sheet for SINAMICS V20

Article No. : 6SL3210-5BB21-5UV1

Client order no. : Item no. : Figure similar


Order no. : Consignment no. :
Offer no. : Project :
Remarks :

Rated data Ambient conditions


Input Cooling External fan

Number of phases 1 AC Installation altitude 1,000 m (3,280.84 ft)

Line voltage 200 ... 240 V -15 % +10 % Ambient temperature

Line frequency 47 ... 63 Hz Operation2) -10 ... 60 °C (14 ... 140 °F)

Output Storage -40 ... 70 °C (-40 ... 158 °F)

Number of phases 3 AC Relative humidity

Rated voltage 230V IEC 240V NEC 1) Max. operation 95 %

Rated power (LO) 1.50 kW 2.00 hp


Connections
Rated power (HO) 1.50 kW 2.00 hp Max. motor cable length
Rated current (LO) 7.80 A 7.80 A Shielded 25 m (82.02 ft)
Rated current (HO) 7.80 A 7.80 A Unshielded 50 m (164.04 ft)
Rated current (IN) 7.80 A
Mechanical data
Pulse frequency 8.00 kHz
Mounting position Wall mounting / side-by-side mounting
Output frequency 0 ... 550 Hz
Degree of protection IP20 / UL open type
Overload capability
Frame size FSAC
Low Overload (LO)
Net weight 1.20 kg (2.65 lb)
110 % rated output current for 60 s, cycle time 300 s
Dimensions
High Overload (HO)
Width 91.0 mm (3.57 in)
150 % rated output current for 60 s, cycle time 300 s
Height 160.9 mm (6.33 in)

General tech. specifications Depth 147.0 mm (5.79 in)


Power factor λ 0.72
Standards
Offset factor cos φ 0.95
Compliance with standards CE, cULus, C-Tick (RCM)
Efficiency η 0.98
EN 61800-5-1 /EN 60204-1 and EN
CE marking
Filter class (integrated) Unfiltered 61800-3

Communication
1)
The output current and HP ratings are valid for the voltage range 220V-240V
Communication USS, Modbus RTU 2)
Please observe derating at temperatures of 40 °C or above

Inputs / outputs
Standard digital inputs

Number 4

Digital outputs

Number as relay changeover contact 1

Number as transistor 1

Analog inputs

2 (Can be used as additional digital


Number
input)

Analog outputs

Number 1

Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 1 of 1 Generated Tue Dec 24 15:03:27 CET 2024

You might also like