Amine Unit Train 1

for Sour Gas Treatment Facility

(SGTF) –
Majnoon Oil Field
VENDOR DOCUMENT REVIEW SHEET

Purchase Order Number: IQP-4068-MS-001

Purchase Order Title: AMINE PACKAGE

Suppliers Name: THERMO DESIGN ENGINEERING LTD.

Suppliers Reference Number and Revision: No. N/A Rev. N/A

Supplier (Prepared By) Name Judy Signature Date 14-June-24

Supplier (Checked By) Name Cris Signature Date 14-June-24

Supplier (Approved By) with Date Name Soni Signature Date 14-June-24

Document Class Class 3 For Company Information Only

Document Description: GENERAL ARRANGEMENT DRAWINGS OF BALL VALVES FOR AMINE PACKAGE
(AMU-A-15301) AND HOT OIL PACKAGE (AMU-A-50701)

Equipment / Tag Number(s): AMU-A-15301 / AMU-A-50701

Project № PO.№ VDRL Code Seq. № Sheet No. Rev. No. Status code

MGP1 P4068MS001 B01 0004 002 IFA

Also Covers
SDRL codes
COMPANY review and comments shall not be assumed to indicate either responsibility or liability for accuracy and
completeness of this document or to alter any contractual terms and conditions.

Review Code and Status

Code 1 Accepted – Up-rev and Resubmit with applicable document lifecycle status code
Revise and Resubmit –Incorporate Comments, Up-Rev & Resubmit at the next document
Code 2 lifecycle status code – Work May Proceed
Rejected– Address highlighted deficiencies, Up-Rev and Resubmit at the next document lifecycle
Code 3 status code – Work May not proceed
Code 4 Review Not Required – Do not resubmit

Code 5 Cancelled

Code 6 Information

Date: Name: Sign:

Note: This sheet shall be the 1st cover page of all A3 & A4 documents. This block will also form part of the
A3 drawing template.
 Amine Unit Train 1
for Sour Gas Treatment Facility
(SGTF) –
Majnoon Oil Field

GENERAL ARRANGEMENT DRAWINGS OF BALL VALVES FOR

AMINE PACKAGE (AMU-A-15301) AND HOT OIL PACKAGE (AMU-A-
50701)

002 Issue for Approval 14-June-24 Judy.Fang Kris Yang Sunny Gao

001 Issue for Review 14-Feb-24 Judy.Fang Kris Yang Sunny Gao

Rev. Reason for Issue Date Author Checker Approver

Rev.002
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-20-1 AMU-153HV-0006 6 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-2 AMU-153HV-0017 17 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-3 AMU-153HV-0046 46 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-4 AMU-153HV-0061 59 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-5 AMU-153HV-0062 60 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-6 AMU-153HV-0063 61 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-7 AMU-153HV-0095 79 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-8 AMU-153HV-0105 88 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-9 AMU-153HV-0106 89 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-10 AMU-153HV-0107 90 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-11 AMU-153HV-0289 243 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-12 AMU-153HV-0297 248 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-13 AMU-153HV-0298 249 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-14 AMU-153HV-0303 254 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-15 AMU-153HV-0315 258 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-16 AMU-153HV-0436 354 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-17 AMU-153HV-0437 355 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-18 AMU-153HV-0439 356 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-19 AMU-153HV-0440 357 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-20 AMU-153HV-0664 541 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-21 AMU-153HV-0665 542 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-22 AMU-153HV-0666 543 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-23 AMU-153HV-0670 547 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-24 AMU-153HV-0936 594 1 QFCL600CSK045 6C22RP Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-20-25 AMU-153HV-0941 596 1 QFCL600CSK045 6C22R Ball Valve,1x3/4BB6R V3,C4057/3G2626 1
10042796-40-1 AMU-153HV-0008 8 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-40-2 AMU-153HV-0052 50 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-40-3 AMU-153HV-0491 394 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-40-4 AMU-153HV-0942 597 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-40-5 AMU-153HV-0723 650 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-40-6 AMU-153HV-0725 652 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-1 AMU-153HV-0584 478 1 QFCL600CSK045 6C22RP Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-2 AMU-153HV-0586 480 1 QFCL600CSK045 6C22RP Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-3 AMU-153HV-0587 481 1 QFCL600CSK045 6C22RP Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-4 AMU-153HV-0757 684 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-5 AMU-153HV-0759 686 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-10 AMU-153HV-0774 701 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-770-11 AMU-153HV-0776 703 1 QFCL600CSK045 6C22R Ball Valve,3/4x1/2BB6R V3,C4057/3G2626 1
10042796-1140-1 AMU-153HV-0912 838 1 QFCL600CSK045 6C22R Ball Valve,1/2x3/8BB6R V3,C4057/3G2626 1
10042796-1140-2 AMU-153HV-0918 844 1 QFCL600CSK045 6C22R Ball Valve,1/2x3/8BB6R V3,C4057/3G2626 1
10042796-100-1 AMU-153HV-0021 21 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-100-2 AMU-153HV-0022 22 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-3 AMU-153HV-0027 27 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-4 AMU-153HV-0030 30 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-5 AMU-153HV-0031 31 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-6 AMU-153HV-0034 34 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-7 AMU-153HV-0037 37 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-8 AMU-153HV-0038 38 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-9 AMU-153HV-0040 40 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-10 AMU-153HV-0042 42 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-11 AMU-153HV-0083 76 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-12 AMU-153HV-0113 96 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-13 AMU-153HV-0114 97 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-14 AMU-153HV-0118 101 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-15 AMU-153HV-0121 104 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-16 AMU-153HV-0124 107 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-100-17 AMU-153HV-0505 408 1 QFCL600RLK004 6S42R Ball Valve,3/4x1/2BB6R V3,S415/3G2626 2
10042796-120-1 AMU-153HV-0026 26 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-2 AMU-153HV-0035 35 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-3 AMU-153HV-0070 64 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-4 AMU-153HV-0077 70 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-5 AMU-153HV-0078 71 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-6 AMU-153HV-0122 105 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-120-7 AMU-153HV-0447 364 1 QFCL600RLK004 6S42R Ball Valve,1x3/4BB6R V3,S415/3G2626 2
10042796-220-1 AMU-153HV-0096 80 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-2 AMU-153HV-0144 125 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-3 AMU-153HV-0145 126 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-4 AMU-153HV-0319 262 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-5 AMU-153HV-0381 311 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-6 AMU-153HV-0382 312 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-7 AMU-153HV-0383 313 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-8 AMU-153HV-0621 506 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-9 AMU-153HV-0625 510 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-14 AMU-507HV-0087 937 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-15 AMU-507HV-0088 938 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-16 AMU-507HV-0092 942 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-220-17 AMU-507HV-0093 943 1 QFCL150CS211 1C24 Ball Valve,3/4x1/2BB1R V4,C40/3G1103 3
10042796-830-1 AMU-153HV-0626 511 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-2 AMU-153HV-0628 513 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-3 AMU-153HV-0629 514 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-4 AMU-153HV-0631 516 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-5 AMU-153HV-0632 517 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-830-6 AMU-153HV-0634 519 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-7 AMU-507HV-0635 988 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-830-8 AMU-507HV-0637 990 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-850-1 AMU-153HV-0638 520 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10042796-850-2 AMU-153HV-0639 521 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10042796-850-3 AMU-153HV-0640 522 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10042796-850-4 AMU-507HV-0641 991 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10044293-630 AMU-153HV-0963 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10044293-640 AMU-153HV-0964 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10044293-660 AMU-153HV-0966 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10044293-930 AMU-507HV-0967 1 QFCL150CS211 1C24 Ball Valve,1/2x3/8BB1R V4,C40/3G1103 3
10044293-940 AMU-507HV-0968 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10044293-960 AMU-507HV-0970 1 QFCL150CS211 1C24 Ball Valve,1x3/4BB1R V4,C40/3G1103 3
10042796-600-1 AMU-153HV-0384 314 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-600-2 AMU-153HV-0385 315 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-600-3 AMU-153HV-0388 317 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-600-4 AMU-153HV-0590 484 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-600-5 AMU-153HV-0591 485 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-600-6 AMU-153HV-0671 548 1 QFCL150CS104 1C22P Ball Valve,3/4x1/2BB1R V4,C40/3G2626 4
10042796-350-1 AMU-153HV-0162 137 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-2 AMU-153HV-0198 167 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-3 AMU-153HV-0292 244 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-4 AMU-153HV-0294 245 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-5 AMU-153HV-0361 292 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-7 AMU-153HV-0524 425 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-8 AMU-153HV-0554 455 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-9 AMU-153HV-0564 461 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-10 AMU-153HV-0565 462 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-11 AMU-153HV-0567 464 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-12 AMU-153HV-0569 466 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-13 AMU-153HV-0595 488 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-14 AMU-153HV-0596 489 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-15 AMU-153HV-0699 576 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-350-16 AMU-153HV-0701 578 1 QFCL150CSK096 1C22RP Ball Valve,1x3/4BB1R V4,C4057/3G2626 5
10042796-410-1 AMU-153HV-0191 160 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-2 AMU-153HV-0193 162 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-3 AMU-153HV-0202 170 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-4 AMU-153HV-0203 171 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-5 AMU-153HV-0217 180 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-6 AMU-153HV-0218 181 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-7 AMU-153HV-0334 275 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-410-8 AMU-153HV-0335 276 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-9 AMU-153HV-0345 279 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-10 AMU-153HV-0368 298 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-11 AMU-153HV-0401 329 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-12 AMU-153HV-0405 332 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-13 AMU-153HV-0412 337 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-14 AMU-153HV-0416 339 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-15 AMU-153HV-0419 342 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-16 AMU-153HV-0426 348 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-17 AMU-153HV-0428 350 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-18 AMU-153HV-0607 496 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-19 AMU-153HV-0615 501 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-20 AMU-153HV-0616 502 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-21 AMU-153HV-0618 503 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-22 AMU-153HV-0619 504 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-23 AMU-153HV-0681 558 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-24 AMU-153HV-0682 559 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-25 AMU-153HV-0685 562 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-26 AMU-153HV-0686 563 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-27 AMU-153HV-0687 564 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-28 AMU-153HV-0870 796 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-410-32 AMU-507HV-0102 948 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-415-1 AMU-153HV-0868 794 1 QFCL150CSK096 1C22RP Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-1150-1 AMU-153HV-0913 839 1 QFCL150CSK096 1C22R Ball Valve,1/2x3/8BB1R V4,C4057/3G2626 5
10042796-1150-2 AMU-153HV-0919 845 1 QFCL150CSK096 1C22R Ball Valve,1/2x3/8BB1R V4,C4057/3G2626 5
10042796-1150-3 AMU-153HV-0924 850 1 QFCL150CSK096 1C22RP Ball Valve,1/2x3/8BB1R V4,C4057/3G2626 5
10042796-1150-4 AMU-153HV-0925 851 1 QFCL150CSK096 1C22RP Ball Valve,1/2x3/8BB1R V4,C4057/3G2626 5
10042796-1150-5 AMU-153HV-0931 857 1 QFCL150CSK096 1C22RP Ball Valve,1/2x3/8BB1R V4,C4057/3G2626 5
10044293-870 AMU-507HV-0103 1 QFCL150CSK096 1C22R Ball Valve,3/4x1/2BB1R V4,C4057/3G2626 5
10042796-80-1 AMU-153HV-0013 13 1 QFCL150LCK018 1C42R Ball Valve,3/4x1/2BB1R V4,L7051/3G2626 6
10042796-80-2 AMU-153HV-0099 82 1 QFCL150LCK018 1C42R Ball Valve,3/4x1/2BB1R V4,L7051/3G2626 6
10042796-80-3 AMU-153HV-0243 206 1 QFCL150LCK018 1C42R Ball Valve,3/4x1/2BB1R V4,L7051/3G2626 6
10042796-80-4 AMU-153HV-0608 497 1 QFCL150LCK018 1C42R Ball Valve,3/4x1/2BB1R V4,L7051/3G2626 6
10042796-300-1 AMU-153HV-0136 117 1 QFCL150LCK018 1C42R Ball Valve,1x3/4BB1R V4,L7051/3G2626 6
10042796-300-2 AMU-153HV-0395 324 1 QFCL150LCK018 1C42R Ball Valve,1x3/4BB1R V4,L7051/3G2626 6
10044293-490 AMU-153HV-0940 1 QFCL150LCK018 1C42R Ball Valve,1x3/4BB1R V4,L7051/3G2626 6
10044293-540 AMU-153HV-0947 1 QFCL150LCK018 1C42R Ball Valve,1x3/4BB1R V4,L7051/3G2626 6
10042796-680-1 AMU-153HV-0466 379 1 QFCL150RL004 1S45 Ball Valve,1/2BB1R V4,S415/1G2626 7
10042796-680-2 AMU-153HV-0469 382 1 QFCL150RL004 1S45 Ball Valve,1/2BB1R V4,S415/1G2626 7
10042796-630-1 AMU-153HV-0431 353 1 QFCL150RL018 1S45 Ball Valve,1x3/4BB1R V4,S415/1G2626 8
10042796-660-7 AMU-153HV-0461 374 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1R V4,S415/1G2626 8
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-660-19 AMU-153HV-0476 389 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1R V4,S415/1G2626 8
10042796-670-1 AMU-153HV-0453 368 1 QFCL150RL018 1S45 Ball Valve,3/4x1/2BB1R V4,S415/1G2626 8
10042796-820-1 AMU-153HV-0623 508 1 QFCL150RL018 1S47 Ball Valve,3/4x1/2BB1N V4,S415/1G2626 8
10042796-840-1 AMU-153HV-0627 512 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1N V4,S415/1G2626 8
10042796-840-2 AMU-153HV-0630 515 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1N V4,S415/1G2626 8
10042796-840-3 AMU-153HV-0633 518 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1N V4,S415/1G2626 8
10042796-840-4 AMU-507HV-0636 989 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1N V4,S415/1G2626 8
10044293-650 AMU-153HV-0965 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1R V4,S415/1G2626 8
10044293-950 AMU-507HV-0969 1 QFCL150RL018 1S47 Ball Valve,1x3/4BB1R V4,S415/1G2626 8
10042796-650-1 AMU-153HV-0442 359 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-2 AMU-153HV-0443 360 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-3 AMU-153HV-0444 361 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-4 AMU-153HV-0445 362 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-5 AMU-153HV-0493 396 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-6 AMU-153HV-0495 398 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-7 AMU-153HV-0496 399 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-8 AMU-153HV-0497 400 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-9 AMU-153HV-0498 401 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-10 AMU-153HV-0499 402 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-11 AMU-153HV-0500 403 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-12 AMU-153HV-0501 404 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-13 AMU-153HV-0502 405 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-14 AMU-153HV-0503 406 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-15 AMU-153HV-0504 407 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-16 AMU-153HV-0518 419 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-17 AMU-153HV-0519 420 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-18 AMU-153HV-0528 429 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-19 AMU-153HV-0529 430 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-20 AMU-153HV-0530 431 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-21 AMU-153HV-0531 432 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-22 AMU-153HV-0542 443 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-23 AMU-153HV-0543 444 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-24 AMU-153HV-0560 457 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-25 AMU-153HV-0568 465 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-26 AMU-153HV-0579 473 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-27 AMU-153HV-0580 474 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-28 AMU-153HV-0648 529 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-29 AMU-153HV-0649 530 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-30 AMU-153HV-0650 531 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-31 AMU-153HV-0651 532 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-32 AMU-153HV-0655 533 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-650-33 AMU-153HV-0656 534 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-34 AMU-153HV-0678 555 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-35 AMU-153HV-0694 571 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-36 AMU-153HV-0695 572 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-37 AMU-153HV-0696 573 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-38 AMU-153HV-0697 574 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-39 AMU-153HV-0702 579 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-40 AMU-153HV-0703 580 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-41 AMU-153HV-0704 581 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-42 AMU-507HV-0116 959 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-43 AMU-507HV-0117 960 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-44 AMU-507HV-0118 961 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-45 AMU-507HV-0119 962 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-46 AMU-507HV-0120 963 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-47 AMU-507HV-0121 964 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-48 AMU-507HV-0123 966 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-49 AMU-507HV-0125 968 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-50 AMU-507HV-0126 969 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-650-51 AMU-507HV-0127 970 1 QTCL150RL001 1S47 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-260 AMU-153HV-0452 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-270 AMU-153HV-0456 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-280 AMU-153HV-0457 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-290 AMU-153HV-0458 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-300 AMU-153HV-0459 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-310 AMU-153HV-0460 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-320 AMU-153HV-0462 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-330 AMU-153HV-0463 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-340 AMU-153HV-0464 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-350 AMU-153HV-0465 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-360 AMU-153HV-0467 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-370 AMU-153HV-0468 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-380 AMU-153HV-0470 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-390 AMU-153HV-0471 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-400 AMU-153HV-0472 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-410 AMU-153HV-0473 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-420 AMU-153HV-0475 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10044293-480 AMU-153HV-0714 1 QFCL150RL018 1S45 Ball Valve,1/2x3/8BB1N V4,S415/1G2626 9
10042796-260-1 AMU-153HV-0128 111 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-2 AMU-153HV-0140 121 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-3 AMU-153HV-0158 136 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-4 AMU-153HV-0178 149 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-260-5 AMU-153HV-0181 152 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-6 AMU-153HV-0184 155 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-7 AMU-153HV-0185 156 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-8 AMU-153HV-0194 163 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-9 AMU-153HV-0196 165 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-10 AMU-153HV-0211 176 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-11 AMU-153HV-0251 212 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-12 AMU-153HV-0252 213 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-13 AMU-153HV-0253 214 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-14 AMU-153HV-0284 241 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-15 AMU-153HV-0522 423 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-16 AMU-153HV-0523 424 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-17 AMU-153HV-0537 438 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-18 AMU-153HV-0538 439 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-19 AMU-153HV-0539 440 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-20 AMU-153HV-0657 535 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-21 AMU-153HV-0658 536 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-22 AMU-153HV-0660 537 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-23 AMU-153HV-0661 538 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-24 AMU-153HV-0662 539 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-25 AMU-153HV-0663 540 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-26 AMU-153HV-0674 551 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-27 AMU-153HV-0675 552 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-28 AMU-153HV-0676 553 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-260-29 AMU-153HV-0677 554 1 QFCL150RLK001 1S42R Ball Valve,1x3/4BB1R V4,S415/3G2626 10
10042796-320-1 AMU-153HV-0149 130 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-2 AMU-153HV-0150 131 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-3 AMU-153HV-0164 139 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-4 AMU-153HV-0166 141 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-5 AMU-153HV-0223 186 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-6 AMU-153HV-0226 189 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-7 AMU-153HV-0237 200 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-8 AMU-153HV-0239 202 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-9 AMU-153HV-0260 219 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-10 AMU-153HV-0263 222 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-11 AMU-153HV-0265 224 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-12 AMU-153HV-0266 225 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-13 AMU-153HV-0268 226 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-14 AMU-153HV-0275 232 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-15 AMU-153HV-0279 236 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-16 AMU-153HV-0280 237 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-320-17 AMU-153HV-0283 240 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-18 AMU-153HV-0355 289 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-19 AMU-153HV-0356 290 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-20 AMU-153HV-0357 291 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-21 AMU-153HV-0391 320 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-22 AMU-153HV-0394 323 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-23 AMU-153HV-0397 326 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-24 AMU-153HV-0508 411 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-25 AMU-153HV-0511 414 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-26 AMU-153HV-0512 415 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-27 AMU-153HV-0517 418 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-28 AMU-153HV-0545 446 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-29 AMU-153HV-0547 448 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-30 AMU-153HV-0549 450 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-31 AMU-153HV-0551 452 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-32 AMU-153HV-0791 718 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-33 AMU-153HV-0793 720 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-34 AMU-153HV-0796 723 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-35 AMU-153HV-0798 725 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-40 AMU-153HV-0825 751 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-41 AMU-153HV-0827 753 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-46 AMU-153HV-0844 770 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-320-47 AMU-153HV-0846 772 1 QFCL150RLK001 1S42R Ball Valve,3/4x1/2BB1R V4,S415/3G2626 10
10042796-1160-1 AMU-153HV-0930 856 1 QFCL150RLK001 1S42R Ball Valve,1/2x3/8BB1R V4,S415/3G2626 10
10042796-380-1 AMU-153HV-0169 144 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-380-2 AMU-153HV-0190 159 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-380-3 AMU-153HV-0192 161 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-380-4 AMU-153HV-0213 178 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-380-5 AMU-153HV-0216 179 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-380-6 AMU-153HV-0396 325 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-800-1 AMU-153HV-0604 494 1 QFCL150CSK098 1C22RP Ball Valve,4BB1R V4A,C4057/3G2626 11
10044293-230 AMU-153HV-0418 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10044293-240 AMU-153HV-0427 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10044293-250 AMU-153HV-0429 1 QFCL150CSK098 1C22RP Ball Valve,2BB1R V4A,C4057/3G2626 11
10042796-370-1 AMU-153HV-0167 142 1 QFCL150RLK006 1S42R Ball Valve,2BB1R V4A,S415/3G2626 12
10042796-370-2 AMU-153HV-0168 143 1 QFCL150RLK006 1S42R Ball Valve,2BB1R V4A,S415/3G2626 12
10042796-370-3 AMU-153HV-0199 168 1 QFCL150RLK006 1S42R Ball Valve,2BB1R V4A,S415/3G2626 12
10042796-370-4 AMU-153HV-0200 169 1 QFCL150RLK006 1S42R Ball Valve,2BB1R V4A,S415/3G2626 12
10042796-520-1 AMU-153HV-0326 268 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-520-2 AMU-153HV-0386 316 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-520-3 AMU-153HV-0488 393 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-520-4 AMU-153HV-0646 527 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-520-5 AMU-153HV-0647 528 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-520-6 AMU-153HV-0709 586 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-520-7 AMU-153HV-0933 859 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-530-1 AMU-153HV-0328 269 1 QFCL150CS203 1C22P Ball Valve,3x2BB1R V4A,C40/3G2626 13
10042796-530-2 AMU-153HV-0329 270 1 QFCL150CS203 1C22P Ball Valve,3x2BB1R V4A,C40/3G2626 13
10042796-530-3 AMU-153HV-0331 272 1 QFCL150CS203 1C22P Ball Valve,3x2BB1R V4A,C40/3G2626 13
10044293-500 AMU-153HV-0943 1 QFCL150CS203 1C22P Ball Valve,2x1-1/2BB1R V4A,C40/3G2626 13
10042796-310-1 AMU-153HV-0143 124 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-2 AMU-153HV-0146 127 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-5 AMU-153HV-0321 264 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-6 AMU-153HV-0324 266 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-7 AMU-153HV-0620 505 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-8 AMU-153HV-0624 509 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-10 AMU-507HV-0065 916 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-11 AMU-507HV-0068 918 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-13 AMU-507HV-0089 939 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-310-14 AMU-507HV-0094 944 1 QFCL150CS212 1C24 Ball Valve,2x1-1/2BB1R V4A,C40/3G1103 14
10042796-540-1 AMU-153HV-0332 273 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-2 AMU-153HV-0333 274 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-3 AMU-153HV-0348 282 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-4 AMU-153HV-0349 283 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-5 AMU-153HV-0350 284 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-6 AMU-153HV-0363 293 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-7 AMU-153HV-0365 295 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-8 AMU-153HV-0366 296 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-9 AMU-153HV-0369 299 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-10 AMU-153HV-0370 300 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-11 AMU-153HV-0371 301 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-12 AMU-153HV-0372 302 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-13 AMU-153HV-0373 303 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-14 AMU-153HV-0377 307 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-15 AMU-153HV-0378 308 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-16 AMU-153HV-0379 309 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-17 AMU-153HV-0399 328 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-18 AMU-153HV-0402 330 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-19 AMU-153HV-0403 331 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-20 AMU-153HV-0406 333 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-21 AMU-153HV-0411 336 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-22 AMU-153HV-0415 338 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-28 AMU-153HV-0552 453 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-540-29 AMU-153HV-0553 454 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-30 AMU-153HV-0561 458 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-31 AMU-153HV-0602 492 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-34 AMU-153HV-0672 549 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-35 AMU-153HV-0679 556 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-36 AMU-153HV-0680 557 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-37 AMU-153HV-0683 560 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-38 AMU-153HV-0684 561 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-39 AMU-153HV-0711 588 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-40 AMU-153HV-0712 589 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-540-41 AMU-507HV-0099 947 1 QFCL150CSK095 1C22R Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10042796-560-1 AMU-153HV-0346 280 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-2 AMU-153HV-0347 281 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-3 AMU-153HV-0351 285 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-4 AMU-153HV-0352 286 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-5 AMU-153HV-0374 304 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-6 AMU-153HV-0375 305 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-7 AMU-153HV-0376 306 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-8 AMU-153HV-0417 340 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-9 AMU-153HV-0420 343 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-10 AMU-153HV-0421 344 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-11 AMU-153HV-0422 345 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-12 AMU-153HV-0424 346 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-13 AMU-153HV-0425 347 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-14 AMU-153HV-0532 433 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-15 AMU-153HV-0710 587 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-560-16 AMU-153HV-0713 590 1 QFCL150CSK095 1C22RP Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-740-1 AMU-153HV-0566 463 1 QFCL150CSK095 1C22RP Ball Valve,4x3BB1R V4A,C4057/3G2626 15
10042796-740-2 AMU-153HV-0673 550 1 QFCL150CSK095 1C22R Ball Valve,4x3BB1R V4A,C4057/3G2626 15
10042796-740-3 AMU-153HV-0698 575 1 QFCL150CSK095 1C22RP Ball Valve,4x3BB1R V4A,C4057/3G2626 15
10044293-450 AMU-153HV-0611 1 QFCL150CSK095 1C22R Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10044293-460 AMU-153HV-0613 1 QFCL150CSK095 1C22R Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10044293-510 AMU-153HV-0944 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-520 AMU-153HV-0945 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-530 AMU-153HV-0946 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-550 AMU-153HV-0949 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-580 AMU-153HV-0952 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-620 AMU-153HV-0956 1 QFCL150CSK095 1C22RP Ball Valve,2x1-1/2BB1R V4A,C4057/3G2626 15
10044293-780 AMU-507HV-0043 1 QFCL150CSK095 1C22R Ball Valve,3x2BB1R V4A,C4057/3G2626 15
10042796-250-1 AMU-153HV-0127 110 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-2 AMU-153HV-0131 114 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-250-3 AMU-153HV-0141 122 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-4 AMU-153HV-0147 128 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-5 AMU-153HV-0148 129 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-6 AMU-153HV-0156 135 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-7 AMU-153HV-0163 138 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-8 AMU-153HV-0174 145 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-9 AMU-153HV-0175 146 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-10 AMU-153HV-0207 172 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-11 AMU-153HV-0208 173 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-12 AMU-153HV-0219 182 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-13 AMU-153HV-0221 184 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-14 AMU-153HV-0224 187 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-15 AMU-153HV-0233 196 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-16 AMU-153HV-0235 198 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-17 AMU-153HV-0245 207 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-18 AMU-153HV-0247 208 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-23 AMU-153HV-0269 227 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-24 AMU-153HV-0270 228 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-25 AMU-153HV-0272 229 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-26 AMU-153HV-0273 230 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-27 AMU-153HV-0274 231 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-28 AMU-153HV-0276 233 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-29 AMU-153HV-0277 234 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-30 AMU-153HV-0278 235 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-31 AMU-153HV-0281 238 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-32 AMU-153HV-0282 239 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-33 AMU-153HV-0330 271 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-35 AMU-153HV-0354 288 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-36 AMU-153HV-0389 318 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-37 AMU-153HV-0390 319 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-38 AMU-153HV-0392 321 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-39 AMU-153HV-0393 322 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-40 AMU-153HV-0509 412 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-41 AMU-153HV-0510 413 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-42 AMU-153HV-0513 416 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-43 AMU-153HV-0514 417 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-44 AMU-153HV-0533 434 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-45 AMU-153HV-0642 523 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-46 AMU-153HV-0643 524 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-47 AMU-153HV-0644 525 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-48 AMU-153HV-0645 526 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-250-49 AMU-153HV-0668 545 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-250-50 AMU-153HV-0708 585 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-330-1 AMU-153HV-0153 132 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10042796-330-2 AMU-153HV-0154 133 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10044293-140 AMU-153HV-0258 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10044293-150 AMU-153HV-0259 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10044293-160 AMU-153HV-0261 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10044293-170 AMU-153HV-0262 1 QFCL150RLK002 1S42R Ball Valve,3x2BB1R V4A,S415/3G2626 16
10044293-560 AMU-153HV-0950 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10044293-600 AMU-153HV-0954 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10044293-610 AMU-153HV-0955 1 QFCL150RLK002 1S42R Ball Valve,2x1-1/2BB1R V4A,S415/3G2626 16
10042796-640-1 AMU-153HV-0441 358 1 QFCL150RL005 1S47 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-2 AMU-153HV-0449 365 1 QFCL150RL005 1S45 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-3 AMU-153HV-0451 366 1 QFCL150RL005 1S45 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-4 AMU-153HV-0474 387 1 QFCL150RL005 1S45 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-5 AMU-153HV-0622 507 1 QFCL150RL005 1S47 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-6 AMU-153HV-0901 827 1 QFCL150RL005 1S45 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-7 AMU-153HV-0902 828 1 QFCL150RL005 1S45 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-640-8 AMU-507HV-0129 972 1 QFCL150RL005 1S47 Ball Valve,2x1-1/2BB1R V4A,S415/1G2626 17
10042796-1110-1 AMU-153HV-0900 826 1 QFCL150RL005 1S45 Ball Valve,3x2BB1R V4A,S415/1G2626 17
10042796-270-1 AMU-153HV-0129 112 1 QFCL150RLK004 1S42R Ball Valve,10BS1R-G V5M,S415/38262626 18
10042796-270-2 AMU-153HV-0130 113 1 QFCL150RLK004 1S42R Ball Valve,10BS1R-G V5M,S415/38262626 18
10042796-270-3 AMU-153HV-0138 119 1 QFCL150RLK004 1S42R Ball Valve,10BS1R-G V5M,S415/38262626 18
10042796-270-4 AMU-153HV-0139 120 1 QFCL150RLK004 1S42R Ball Valve,10BS1R-G V5M,S415/38262626 18
10042796-460-1 AMU-153HV-0238 201 1 QFCL150RLK004 1S42R Ball Valve,6BS1R-G V5M,S415/38262626 18
10042796-460-2 AMU-153HV-0240 203 1 QFCL150RLK004 1S42R Ball Valve,6BS1R-G V5M,S415/38262626 18
10042796-480-1 AMU-153HV-0250 211 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-2 AMU-153HV-0254 215 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-3 AMU-153HV-0255 216 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-4 AMU-153HV-0534 435 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-5 AMU-153HV-0535 436 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-6 AMU-153HV-0536 437 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-7 AMU-153HV-0540 441 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-480-8 AMU-153HV-0541 442 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/38262626 19
10042796-50-1 AMU-153HV-0010 10 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-2 AMU-153HV-0015 15 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-3 AMU-153HV-0043 43 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-4 AMU-153HV-0048 47 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-5 AMU-153HV-0056 54 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-6 AMU-153HV-0084 77 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-50-7 AMU-153HV-0446 363 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10044293-570 AMU-153HV-0951 1 QFCL600CSK046 6C22R Ball Valve,2x1-1/2BS6R V5,C4057/3H262626 20
10042796-90-1 AMU-153HV-0019 19 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-2 AMU-153HV-0020 20 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-3 AMU-153HV-0023 23 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-4 AMU-153HV-0024 24 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-5 AMU-153HV-0028 28 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-6 AMU-153HV-0029 29 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-7 AMU-153HV-0032 32 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-8 AMU-153HV-0033 33 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-90-9 AMU-153HV-0506 409 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3H262626 21
10042796-30-1 AMU-153HV-0007 7 1 QFCL600CSK049 6C22R Ball Valve,3BS6R-G V5M,C4057/3H262626 22
10042796-30-2 AMU-153HV-0009 9 1 QFCL600CSK049 6C22R Ball Valve,3BS6R-G V5M,C4057/3H262626 22
10042796-35-1 AMU-153HV-0053 51 1 QFCL600CSK049 6C22R Ball Valve,3BS6R-G V5M,C4057/3H262626 22
10042796-35-2 AMU-153HV-0054 52 1 QFCL600CSK049 6C22R Ball Valve,3BS6R-G V5M,C4057/3H262626 22
10042796-10-1 AMU-153HV-0004 4 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-10-2 AMU-153HV-0005 5 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-10-3 AMU-153HV-0016 16 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-10-4 AMU-153HV-0018 18 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-10-5 AMU-153HV-0044 44 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-10-6 AMU-153HV-0045 45 1 QFCL600CSK047 6C22R Ball Valve,14x10BS6R-G V5M,C4057/3H264026 23
10042796-230-1 AMU-153HV-0103 86 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-230-2 AMU-153HV-0104 87 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-230-3 AMU-153HV-0108 91 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-230-4 AMU-153HV-0109 92 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-230-5 AMU-153HV-0110 93 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-235-1 AMU-153HV-0112 95 1 QFCL600CSK047 6C22R Ball Valve,10x8BS6R-G V5M,C4057/3H264026 23
10042796-420-1 AMU-153HV-0195 164 1 QFCL150CSK094 1C22RP Ball Valve,6x4BS1R-G V5,C4057/3M262626 24
10042796-420-2 AMU-153HV-0197 166 1 QFCL150CSK094 1C22RP Ball Valve,6x4BS1R-G V5,C4057/3M262626 24
10042796-420-3 AMU-153HV-0597 490 1 QFCL150CSK094 1C22RP Ball Valve,6x4BS1R-G V5,C4057/3M262626 24
10042796-420-4 AMU-153HV-0599 491 1 QFCL150CSK094 1C22RP Ball Valve,6x4BS1R-G V5,C4057/3M262626 24
10042796-400-1 AMU-153HV-0187 158 1 QFCL150RLK003 1S42R Ball Valve,6x4BS1R-G V5M,S415/3M262626 25
10042796-400-2 AMU-153HV-0212 177 1 QFCL150RLK003 1S42R Ball Valve,6x4BS1R-G V5M,S415/3M262626 25
10042796-610-1 AMU-153HV-0408 334 1 QFCL150CSK094 1C22RP Ball Valve,8x6BS1R-G V5M,C4057/3M262626 26
10042796-610-2 AMU-153HV-0410 335 1 QFCL150CSK094 1C22RP Ball Valve,8x6BS1R-G V5M,C4057/3M262626 26
10042796-610-3 AMU-153HV-0562 459 1 QFCL150CSK094 1C22RP Ball Valve,8x6BS1R-G V5M,C4057/3M262626 26
10042796-610-4 AMU-153HV-0563 460 1 QFCL150CSK094 1C22RP Ball Valve,8x6BS1R-G V5M,C4057/3M262626 26
10042796-390-1 AMU-153HV-0176 147 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-2 AMU-153HV-0177 148 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-3 AMU-153HV-0179 150 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-4 AMU-153HV-0180 151 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-5 AMU-153HV-0182 153 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-390-6 AMU-153HV-0183 154 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-7 AMU-153HV-0186 157 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-8 AMU-153HV-0209 174 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-9 AMU-153HV-0210 175 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-10 AMU-153HV-0520 421 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-11 AMU-153HV-0521 422 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-12 AMU-153HV-0525 426 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-390-13 AMU-153HV-0526 427 1 QFCL150RLK003 1S42R Ball Valve,8x6BS1R-G V5M,S415/3M262626 27
10042796-500-1 AMU-153HV-0304 255 1 QFCL600CSK046 6C22RP Ball Valve,2x1-1/2BS6R V5,C4057/3M262626 28
10042796-500-2 AMU-153HV-0305 256 1 QFCL600CSK046 6C22RP Ball Valve,2x1-1/2BS6R V5,C4057/3M262626 28
10042796-500-3 AMU-153HV-0306 257 1 QFCL600CSK046 6C22RP Ball Valve,2x1-1/2BS6R V5,C4057/3M262626 28
10042796-200-1 AMU-153HV-0081 74 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-200-2 AMU-153HV-0116 99 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-200-3 AMU-153HV-0119 102 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-200-4 AMU-153HV-0120 103 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-200-5 AMU-153HV-0125 108 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-200-6 AMU-153HV-0126 109 1 QFCL600RLK005 6S42R Ball Valve,2x1-1/2BS6R V5,S415/3M262626 29
10042796-760-1 AMU-153HV-0583 477 1 QFCL600CSK046 6C22RP Ball Valve,3x2BS6R V5M,C4057/3M262626 30
10042796-150-1 AMU-153HV-0057 55 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-2 AMU-153HV-0058 56 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-3 AMU-153HV-0059 57 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-4 AMU-153HV-0060 58 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-5 AMU-153HV-0094 78 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-6 AMU-153HV-0098 81 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-7 AMU-153HV-0295 246 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-8 AMU-153HV-0296 247 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-9 AMU-153HV-0299 250 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-10 AMU-153HV-0300 251 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-11 AMU-153HV-0301 252 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-150-12 AMU-153HV-0302 253 1 QFCL600CSK047 6C22RP Ball Valve,6x4BS6R-G V5M,C4057/3M262626 31
10042796-690-1 AMU-153HV-0494 397 1 QFCL600CSK047 6C22RP Ball Valve,4x3BS6R-G V5M,C4057/3M262626 31
10042796-690-2 AMU-153HV-0581 475 1 QFCL600CSK047 6C22RP Ball Valve,4x3BS6R-G V5M,C4057/3M262626 31
10042796-690-3 AMU-153HV-0582 476 1 QFCL600CSK047 6C22RP Ball Valve,4x3BS6R-G V5M,C4057/3M262626 31
10042796-690-4 AMU-153HV-0588 482 1 QFCL600CSK047 6C22RP Ball Valve,4x3BS6R-G V5M,C4057/3M262626 31
10042796-690-5 AMU-153HV-0589 483 1 QFCL600CSK047 6C22RP Ball Valve,4x3BS6R-G V5M,C4057/3M262626 31
10042796-180-1 AMU-153HV-0079 72 1 QFCL600RLK006 6S42R Ball Valve,6x4BS6R-G V5M,S415/3M262626 32
10042796-750-1 AMU-153HV-0570 467 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
10042796-750-2 AMU-153HV-0571 468 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
10042796-750-3 AMU-153HV-0572 469 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
10042796-750-4 AMU-153HV-0705 582 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
10042796-750-5 AMU-153HV-0706 583 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
 Valve Data Sheet Piping
Serial number Valve Tag Item No. QTY Description Sheet No.
Number Class
10042796-750-6 AMU-153HV-0707 584 1 QFCL600CSK047 6C22RP Ball Valve,8x6BS6R-G V5M,C4057/3M262626 33
10042796-170-1 AMU-153HV-0069 63 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10042796-170-2 AMU-153HV-0072 65 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10042796-170-3 AMU-153HV-0073 66 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10042796-170-4 AMU-153HV-0074 67 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10042796-170-5 AMU-153HV-0075 68 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10042796-170-6 AMU-153HV-0076 69 1 QFCL600RLK006 6S42R Ball Valve,8x6BS6R-G V5M,S415/3M262626 34
10044293-180 AMU-153HV-0316 1 QFCL150CS212 1C24 Ball Valve,3x2BB1R V4A,C40/3G1103 35
10044293-190 AMU-153HV-0317 1 QFCL150CS212 1C24 Ball Valve,3x2BB1R V4A,C40/3G1103 35
10044293-40 AMU-153HV-0012 1 QFCL150LCK024 1C42R Ball Valve,3BB1R V4A,L7051/3G2626 36
10044293-430 AMU-153HV-0606 1 QFCL150LCK024 1C42R Ball Valve,4BB1R V4A,L7051/3G2626 36
10044293-220 AMU-153HV-0353 1 QFCL300RLK005 3S42R Ball Valve,2x1-1/2BB3R V4A,S415/3G2626 37
10044293-20 AMU-153HV-0002 1 QFCL600LCK004 6C42R Ball Valve,1x3/4BB6R V3,L7051/3G2626 38
10044293-70 AMU-153HV-0101 1 QFCL600LCK004 6C42R Ball Valve,1x3/4BB6R V3,L7051/3G2626 38
10044293-10 AMU-153HV-0001 1 QFCL600LCK006 6C42R Ball Valve,14x10BS6R-G V5M,L7051/3H264026 39
10044293-30 AMU-153HV-0003 1 QFCL600LCK006 6C42R Ball Valve,14x10BS6R-G V5M,L7051/3H264026 39
10044293-60 AMU-153HV-0100 1 QFCL600LCK006 6C42R Ball Valve,14x10BS6R-G V5M,L7051/3H264026 39
10044293-80 AMU-153HV-0102 1 QFCL600LCK006 6C42R Ball Valve,14x10BS6R-G V5M,L7051/3H264026 39
10044293-50 AMU-153HV-0050 1 QFCL150LCK027 1C42R Ball Valve,6BS1R-G V5M,L7051/38262626 40
10044293-90 AMU-153HV-0135 1 QFCL150LCK027 1C42R Ball Valve,10BS1R-G V5M,L7051/38262626 40
10044293-100 AMU-153HV-0137 1 QFCL150LCK027 1C42R Ball Valve,10BS1R-G V5M,L7051/38262626 40
10044293-120 AMU-153HV-0242 1 QFCL150LCK027 1C42R Ball Valve,6BS1R-G V5M,L7051/38262626 40
Add number
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-d1 H1 H L1 Weight/Kg
P rev io us s o me o f c o mments a re no t inc o rp o ra ted, QFCL600CSK045 6C22R 3 1/2x3/8 600 RF 165 13 9.5 95 66.5 35.1 14.2 4-Ø16 113.5 191 150 8
QFCL600CSK045 6C22R/6C22RP 3 3/4x1/2 600 RF 191 19 13 117 82.6 42.9 15.7 4-Ø19 128.5 217 150 9
h o w ev er a ll c o mments a re no t a ddres s ed in C R S QFCL600CSK045 6C22R/6C22RP 3 1x3/4 600 RF 216 25 19 124 88.9 50.8 17.5 4-Ø19 100.5 201 250 12 1. Fluid Service: Sour Gas,Vent Gas,Lean Amine, 1
Purge Gas,HC Condensate,Sweet Gas
V endo r to inc o rp o ra te a ll c o mments 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated
Q F C L 1 5 0 L C K 0 2 9 , V a lv e is deleted fro m G AD . w h y ? 1/2" Valve: NACE MR0175/ISO 15156
2
AMU-153HV-0912
AMU-153HV-0918 Co rro s s io n a llo w a n c e :
3m m
3/4" Valve:
AMU-153HV-0008
1.Valves comply with NACE requirement 1
AMU-153HV-0052
2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0491
AMU-153HV-0584
L is t th e ta g n u m b e rs a s a 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0586 s im p le ta b le a t th e c o rn e r. 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
L1 AMU-153HV-0587
>=1" Stem, self-relieving seats
AMU-153HV-0942
N09a N24b 5.All SS material shall be dual certified
AMU-153HV-0723
N01
AMU-153HV-0725
＜1" AMU-153HV-0757
N02
AMU-153HV-0759
N08 N35
AMU-153HV-0774 T h is need to c o mp lied a nd
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
N98 AMU-153HV-0776 ens ure by v endo r. External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
N27 1" Valve: Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94 AMU-153HV-0006
N06a Stem Seal
H1
AMU-153HV-0017
WELDING
N96 AMU-153HV-0046 Ad d d a ta s h e e t a n d
P10b
AMU-153HV-0061
AMU-153HV-0062
APPLICABLE STANDARDS: Sp e c ific a tio n fo r v a lv e s a s
AMU-153HV-0063 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
P19
Inspection & Test:API 598 End Connection: ASME B16.5 RF

H
AMU-153HV-0095
AMU-153HV-0105 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0106 N98 LOCKING PLATE 1 ASTM A240 316/316L
W05 W04 AMU-153HV-0107
AMU-153HV-0289 N96 STOP PIN 1 ASTM A276 420
AMU-153HV-0297 N94 STOP PLATE 1 AISI 1045
AMU-153HV-0298 N35 YOKE 1 ASTM A572 GR50
Anti-Static Device
AMU-153HV-0303 N27 ADAPTER 1 AISI 1045
Ød0

ØG

ØD
ØC
Ød

AMU-153HV-0315 N24b WASHER 1 ASTM A240 316/316L

Body Seal AMU-153HV-0436
AMU-153HV-0437
N09a BOLT 1 ISO 3506 A4-70
1
AMU-153HV-0439 N08 NUT 1 ISO 3506 A4-70
AMU-153HV-0440 N06a RETAINER 1 AISI 1065
AMU-153HV-0664 N02 LEVER SLEEVE 1 PVC
n-d1

AMU-153HV-0665 N01 LEVER 1 ASTM A352 LCB

AMU-153HV-0666
AMU-153HV-0670
W26a THRUST WASHER 1 PEEK
t 6.4 AMU-153HV-0936 W05 SPRING 2 INCONEL X-750 1
C01 P01 S05 P08 P07 P02
STL.20 thermal spray AMU-153HV-0941 W04 STEEL BALL 2 INCONEL X-750 1
L S05 SEAT INSERT 1 2 PEEK
S04 PACKING 1 GRAPHITE Primary seal 1 issued for approval
P10a
S01c GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1
S01 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1
C01 BALL 1 ASTM A182 F316/F316L+STL.20
jus tify tec h nic a llyLocking
w h Device
a t do P19 COVER 1 ASTM A105N
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
mea n by th ermaLock(not l s p rasupplied)
y? P10b SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Open Position Close Position P10a SCREW 2 ASTM A193 B7M+Hot dip galvanizing 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
O P08 NUT 6 ASTM A194 2HM+Hot dip galvanizing 1 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
S P07 STUD 6 ASTM A193 B7M+Hot dip galvanizing 1
P06 GLAND 1 ASTM A276 316/316L
P05 GLAND FLANGE 1 ASTM A216 WCB
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A105N
P01 BODY 1 ASTM A105N BOC-1933
1
NO. PART NAME QTY. MATERIAL NOTE MPG1
Stem Seal
Anti-Static Device Body A3
P03 Shell Test 154 bar
NTS
P05 Body Seal
Ball Seat Test (Hyd.) 113 bar
P06 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap 002
FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
S04 Cover Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S01 Spring B 29.03.24 Jet Yu Jerry Li Clarence Gao
S01c Body 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-d1 H1 H L1 Weight/Kg
QFCL600RLK004 6S42R 0 3/4x1/2 600 RF 191 19 13 117 82.6 42.9 15.7 4-Ø19 128.5 217 150 9
QFCL600RLK004 6S42R 0 1x3/4 600 RF 216 25 19 124 88.9 50.8 17.5 4-Ø19 100.5 201 250 12
1. Fluid Service: Purge Gas,HC Condensate,Lean Amine, 1
1 Amine Drain
2. Design Pressure:69.9~99.3Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

3/4" Valve:
AMU-153HV-0021
AMU-153HV-0022
AMU-153HV-0027
AMU-153HV-0030
2
AMU-153HV-0031 1.Valves comply with NACE requirement 1
AMU-153HV-0034 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0037 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0038 10497 / ISO 607
AMU-153HV-0040 4.Valves will be bi-directional, Anti-static, Anti-Blowout
>=1" L1 AMU-153HV-0042 Stem, self-relieving seats
AMU-153HV-0083 5.All SS material shall be dual certified
N09a N24b
AMU-153HV-0113
N01
AMU-153HV-0114
＜1" AMU-153HV-0118
N02
N08 N35
AMU-153HV-0121
AMU-153HV-0124 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
N98 AMU-153HV-0505 External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
N27
1" Valve: Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94
N06a Stem Seal
H1 AMU-153HV-0026
AMU-153HV-0035
WELDING
N96 AMU-153HV-0070
P10b
AMU-153HV-0077 APPLICABLE STANDARDS:
AMU-153HV-0078
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
P19 AMU-153HV-0122
Inspection & Test:API 598 End Connection: ASME B16.5 RF

H
AMU-153HV-0447
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
W05 W04
N98 LOCKING PLATE 1 ASTM A240 316/316L
N96 STOP PIN 1 ASTM A1082 UNS S31803
N94 STOP PLATE 1 ASTM A240 316/316L
N35 YOKE 1 ASTM A572 GR50
Anti-Static Device N27 ADAPTER 1 AISI 1045
Ød0

ØG

ØD
ØC
Ød

Body Seal N24b WASHER 1 ASTM A240 316/316L

N09a BOLT 1 ISO 3506 A4-70
1 N08 NUT 1 ISO 3506 A4-70
N06a RETAINER 1 ASTM A240 316
N02 LEVER SLEEVE 1 PVC
n-d1

N01 LEVER 1 ASTM A352 LCB

W26a THRUST WASHER 1 PEEK
t 6.4 STL.20 thermal spray
W05 SPRING 2 INCONEL X-750 1
C01 P01 S05 P08 P07 P02
W04 STEEL BALL 2 INCONEL X-750 1
L S05 SEAT INSERT 1 2 PEEK
S04 PACKING 1 GRAPHITE Primary seal 1 issued for approval
P10a
S01c GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1
S01 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1
C01 BALL 1 ASTM A182 F316/F316L+STL.20
P19 COVER 1 ASTM A182 F316/F316L
Locking Device 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
Lock(not supplied)
P10b SCREW 4 ASTM A193 B8MA 2
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Open Position Close Position P10a SCREW 2 ASTM A193 B8MA 2
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
O P08 NUT 6 ASTM A194 8MA 2
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
S P07 STUD 6 ASTM A193 B8MA 2
P06 GLAND 1 ASTM A276 316/316L
P05 GLAND FLANGE 1 ASTM A351 CF8M
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A182 F316/F316L
P01 BODY 1 ASTM A182 F316/F316L BOC-1933
1 NO. PART NAME QTY. MATERIAL NOTE MPG1
Stem Seal
Anti-Static Device Body A3
P03 Shell Test 150 bar
NTS
P05 Body Seal
Ball Seat Test (Hyd.) 110 bar
P06 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
S04 Cover Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S01 Spring B 29.03.24 Jet Yu Jerry Li Clarence Gao
S01c Body 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
O====MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CS211 1C24 3 1/2x3/8 150 RF 108 13 9.5 89 60.5 35.1 7.9 4-Ø16 104 186 165 3.2
QFCL150CS211 1C24 3 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5
QFCL150CS211 1C24 3 1x3/4 150 RF 127 25 19 108 79.2 50.8 9.7 4-Ø16 100 191 187 4.8 1. Fluid Service: Purge Gas,Nitrogen,Nitrogen / Lean Amine 1
Vapors,Plant Air,Hot Oil
1 2. Design Pressure:12.1~19.6Barg
3. Temperature : -29~250°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1
1.Valves end flange surface finish shall be 3.2 to 6.3 um
1/2" Valve:
2.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0638
2 10497 / ISO 607
AMU-153HV-0639
3.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0640
L1 Stem, self-relieving seats
AMU-507HV-0641
AMU-153HV-0963 4.All SS material shall be dual certified
AMU-507HV-0967

3/4" Valve:
N08 AMU-153HV-0096
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0144 External Painting MGP1-GP2-CPC-RA-7754-0005
N01
AMU-153HV-0145 PMI MGP1-GP2-CPC-RA-7739-0008
N35 AMU-153HV-0319 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
WELDING AMU-153HV-0381
N94
AMU-153HV-0382
H1

N27 AMU-153HV-0383

H
N10b
AMU-153HV-0621
P22
AMU-153HV-0625
N106 AMU-507HV-0087
N10c Stem Seal AMU-507HV-0088
AMU-507HV-0092
W05 W04 AMU-507HV-0093

1" Valve:
Anti-Static Device AMU-153HV-0626
Ød0

AMU-153HV-0628
ØG

ØD
ØC
Ød

Body Seal AMU-153HV-0629

AMU-153HV-0631 APPLICABLE STANDARDS:
AMU-153HV-0632 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
1
AMU-153HV-0634 Inspection & Test:API 598 End Connection: ASME B16.5 RF
AMU-507HV-0635 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-507HV-0637
N106 LOCKING WASHER 1 ASTM A240 316/316L
AMU-153HV-0964
N94 STOP PLATE 1 AISI 1045
n-Ød1

AMU-153HV-0966
P01 C01 S05 P08 P07 P02 t 1.5 AMU-507HV-0968 N46 DISK SPRING 2 AISI 6150
AMU-507HV-0970 N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 PEEK
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 PEEK
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A105N/ENP
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 2H+Zn.Ni.Xylan1070
L P07 STUD 4 ASTM A193 B7+Zn.Ni.Xylan1070
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F6a
P02 BODY CAP 1 ASTM A105N
P01 BODY 1 ASTM A105N BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Stem Seal Anti-Static Device Body A3
N46 Lock(not supplied) Shell Test 32 bar
Open Position Close Position NTS
Body Seal
P03
Ball Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Stem Anti-staic Ball
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CS104 1C22P 3 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5
1
1. Fluid Service: Lean Amine 1
2. Design Pressure:12.1~19.6Barg
3. Temperature : -29~250°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1
1.Valves end flange surface finish shall be 3.2 to 6.3 um
2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
3.Valves will be bi-directional, Anti-static, Anti-Blowout
L1 Stem, self-relieving seats
4.All SS material shall be dual certified

3/4" Valve:
AMU-153HV-0384 2
N08 AMU-153HV-0385 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
N01 AMU-153HV-0388 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0590 PMI MGP1-GP2-CPC-RA-7739-0008
N35 AMU-153HV-0591 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94 WELDING AMU-153HV-0671
H1

N27

H
N10b

P22

N106

N10c Stem Seal

W05 W04

Anti-Static Device
Ød0

ØG

ØD
ØC
Ød

Body Seal
APPLICABLE STANDARDS:
1
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N106 LOCKING WASHER 1 ASTM A240 316/316L
N94 STOP PLATE 1 AISI 1045
n-Ød1

P01 C01 S05 P08 P07 P02 t 1.5 N46 DISK SPRING 2 AISI 6150
N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 PEEK
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 PEEK
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 2H+Zn.Ni.Xylan1070
L P07 STUD 4 ASTM A193 B7+Zn.Ni.Xylan1070
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A105N
P01 BODY 1 ASTM A105N BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Stem Seal Anti-Static Device Body A3
N46 Lock(not supplied) Shell Test 32 bar
Open Position Close Position NTS
P03
Body Seal
Ball Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Stem Anti-staic Ball
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
W26a
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CSK096 1C22R/1C22RP 3 1/2x3/8 150 RF 108 13 9.5 89 60.5 35.1 7.9 4-Ø16 104 186 165 3.2
QFCL150CSK096 1C22R/1C22RP 3 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5 1. Fluid Service: Lean Amine,Amine Drain, 1
QFCL150CSK096 1C22R/1C22RP 3 1x3/4 150 RF 127 25 19 108 79.2 50.8 9.7 4-Ø16 100 191 187 4.8 Vent Gas,Nitrogen,HC Condensate,Sour gas,Sweet Gas,Fuel Gas
2. Design Pressure:13.2~19.6Barg
1
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
1/2" Valve: 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0913
AMU-153HV-0919
AMU-153HV-0924
AMU-153HV-0925 2

AMU-153HV-0931
1

3/4" Valve: 1.Valves comply with NACE requirement

AMU-153HV-0191 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0193 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0202 10497 / ISO 607
AMU-153HV-0203 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0217 Stem, self-relieving seats
L1 AMU-153HV-0218 5.All SS material shall be dual certified
AMU-153HV-0334
AMU-153HV-0335
AMU-153HV-0345
AMU-153HV-0368
N08
AMU-153HV-0401
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0405
N01
External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0412 PMI MGP1-GP2-CPC-RA-7739-0008
N35 AMU-153HV-0416 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
AMU-153HV-0419
N94 WELDING
AMU-153HV-0426
AMU-153HV-0428
H1

N27

H
N10b
AMU-153HV-0607
P22
AMU-153HV-0615
N106 AMU-153HV-0616
AMU-153HV-0618
N10c Stem Seal
AMU-153HV-0619
W05 W04 AMU-153HV-0681
AMU-153HV-0682
AMU-153HV-0685
Anti-Static Device AMU-153HV-0686
AMU-153HV-0687
Ød0

ØG

ØD
ØC
Ød

Body Seal AMU-153HV-0868

AMU-153HV-0870 APPLICABLE STANDARDS:
AMU-507HV-0102 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
1
AMU-507HV-0103 Inspection & Test:API 598 End Connection: ASME B16.5 RF
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
1" Valve:
N106 LOCKING WASHER 1 ASTM A240 316/316L
AMU-153HV-0162
AMU-153HV-0198 N94 STOP PLATE 1 AISI 1045
n-Ød1

P01 C01 S05 P08 P07 P02 t 1.5 AMU-153HV-0292 N46 DISK SPRING 2 AISI 6150
AMU-153HV-0294 N35 YOKE 1 ASTM A572 GR50
AMU-153HV-0361 N27 ADAPTER 1 AISI 1045
AMU-153HV-0524 N10c SCREW 4 ISO 3506 A2-70
AMU-153HV-0554 N08 NUT 1 ISO 3506 A4-70
AMU-153HV-0564 N10b SCREW 2 ISO 3506 A2-70
AMU-153HV-0565 N01 LEVER 1 ASTM A350 LF2 issued for approval
AMU-153HV-0567 W26a THRUST WASHER 1 PEEK
s o

AMU-153HV-0569 W05 SPRING 2 INCONEL X-750 1

AMU-153HV-0595 W04 STEEL BALL 2 INCONEL X-750 1
AMU-153HV-0596
S05 SEAT INSERT 1 2 PEEK
AMU-153HV-0699 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
AMU-153HV-0701 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 2HM+Zn.Ni.Xylan1070
L P07 STUD 4 ASTM A193 B7M+Zn.Ni.Xylan1070
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A105N
P01 BODY 1 ASTM A105N BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Anti-Static Device Body A3
Stem Seal N46 Lock(not supplied) Shell Test 32 bar
NTS
Body Seal Open Position Close Position
P03
Ball
Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
2 Seat Test (Air)
Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150LCK018 1C42R 3 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5
QFCL150LCK018 1C42R 3 1x3/4 150 RF 127 25 19 108 79.2 50.8 9.7 4-Ø16 100 191 187 4.8
1. Fluid Service: Vent Gas 1
1 2. Design Pressure:13.2~19.6Barg
3. Temperature :-46~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1.Valves comply with NACE requirement 1

2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
L1 Stem, self-relieving seats
5.All SS material shall be dual certified

N08
3/4" Valve:
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
N01 AMU-153HV-0013
2
External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0099 PMI MGP1-GP2-CPC-RA-7739-0008
N35
AMU-153HV-0243 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94 WELDING AMU-153HV-0608
H1

N27

H
N10b
1" Valve:
P22 AMU-153HV-0136
N106
AMU-153HV-0395
AMU-153HV-0940
N10c Stem Seal AMU-153HV-0947
W05 W04

Anti-Static Device
Ød0

ØG

ØD
ØC
Ød

Body Seal
APPLICABLE STANDARDS:
1
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N106 LOCKING WASHER 1 ASTM A240 316/316L
N94 STOP PLATE 1 AISI 1045
n-Ød1

P01 C01 S05 P08 P07 P02 t 1.5 N46 DISK SPRING 2 AISI 6150
N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 PEEK
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 PEEK
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 7ML+Zn.Ni.Xylan1070
L P07 STUD 4 ASTM A320 L7M+Zn.Ni.Xylan1070
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A350 LF2 CL1
P01 BODY 1 ASTM A350 LF2 CL1 BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Stem Seal Anti-Static Device Body A3
N46 Lock(not supplied) Shell Test 32 bar
Open Position Close Position NTS
P03
Body Seal
Ball Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Stem Anti-staic Ball
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
W26a
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d H1 H L1 Weight/Kg
QFCL150RL004 1S45 0 1/2 150 RF 95 13 104 186 165 3.1
2
1. Fluid Service: Antifoam Chemical 1
2. Design Pressure:14.8~19Barg
3. Temperature : -29~150°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

L1 1.Valves end flange surface finish shall be 3.2 to 6.3 um

2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
3.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
4.All SS material shall be dual certified
N08

N01

N35 1/2" Valve:

2
N94 WELDING AMU-153HV-0466 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0469 External Painting MGP1-GP2-CPC-RA-7754-0005
N27

H
N10b PMI MGP1-GP2-CPC-RA-7739-0008

H1
P22 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001

N106

N10c Stem Seal

B
W05 W04

Anti-Static Device
Ød

Body Seal

APPLICABLE STANDARDS:
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
P01 C01 S05 P08 P07 P02
Inspection & Test:API 598 End Connection: ASME B16.11(FNPT)
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N106 LOCKING WASHER 1 ASTM A240 316/316L
N94 STOP PLATE 1 ASTM A240 316/316L
N46 DISK SPRING 2 17-4PH
N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
so

N08 NUT 1 ISO 3506 A4-70

N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 RPTFE
W05 SPRING 2 INCONEL X-750 1
W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 RPTFE
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 8M S1
P07 STUD 4 ASTM A193 B8M CL2
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A182 F316/F316L
P01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Anti-Static Device Body A3
Stem Seal N46 Lock(not supplied) Shell Test 30 bar
NTS
Body Seal Open Position Close Position
P03
Ball Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150RL018 1S45 0 1/2x3/8 150 RF 108 13 9.5 89 60.5 35.1 7.9 4-Ø16 104 186 165 3.2
QFCL150RL018 1S45 0 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5
QFCL150RL018 1S45 0 1x3/4 150 RF 127 25 19 108 79.2 50.8 9.7 4-Ø16 100 191 187 4.8 1. Fluid Service: Antifoam Chemical 1
2. Design Pressure:14.8~19Barg
1 3. Temperature : -29~150°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1
1.Valves end flange surface finish shall be 3.2 to 6.3 um
2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
3.Valves will be bi-directional, Anti-static, Anti-Blowout
L1 Stem, self-relieving seats
4.All SS material shall be dual certified
1/2" Valve: 2
AMU-153HV-0461
AMU-153HV-0476
N08
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
3/4" Valve:
N01 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0453 PMI MGP1-GP2-CPC-RA-7739-0008
N35 AMU-153HV-0623 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94 WELDING
1" Valve:
AMU-153HV-0431
H1

N27

H
N10b
AMU-153HV-0627
P22
AMU-153HV-0630
N106 AMU-153HV-0633
N10c Stem Seal AMU-507HV-0636
AMU-153HV-0965
W05 W04 AMU-507HV-0969

Anti-Static Device
Ød0

ØG

ØD
ØC
Ød

Body Seal
APPLICABLE STANDARDS:
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
1
Inspection & Test:API 598 End Connection: ASME B16.5 RF
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N106 LOCKING WASHER 1 ASTM A240 316/316L
N94 STOP PLATE 1 ASTM A240 316/316L
n-Ød1

P01 C01 S05 P08 P07 P02 t 1.5 N46 DISK SPRING 2 17-4PH
N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 RPTFE
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 RPTFE
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 8M S1
L P07 STUD 4 ASTM A193 B8M CL2
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A182 F316/F316L
P01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Stem Seal Anti-Static Device Body A3
N46 Lock(not supplied) Shell Test 30 bar
Open Position Close Position NTS
Body Seal
P03
Ball Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Stem Anti-staic Ball
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
U MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d B H1 H L1 Weight/Kg
Datasheet No. QTCL150RL001
QTCL150RL001/QFCL150RL018 1S47/1S45 0 1/2x3/8 150 RF 95 9.5 1/2-14NPT 117.5 186 165 3.2
Piping Class 1S47
1. Fluid Service: Instrument Air,Fresh Water 1

AMU-153HV-0442 2. Design Pressure:14.8~19Barg

AMU-153HV-0443 2 3. Temperature : -29~150°C
AMU-153HV-0444 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0445 Datasheet No. QFCL150RL018 5. All dimensions are in millimeter otherwise stated
Piping Class 1S45
AMU-153HV-0493
AMU-153HV-0495
AMU-153HV-0452
AMU-153HV-0496
AMU-153HV-0456
AMU-153HV-0497
AMU-153HV-0457
AMU-153HV-0498
AMU-153HV-0458
AMU-153HV-0499
AMU-153HV-0459
AMU-153HV-0500
AMU-153HV-0460
AMU-153HV-0501 1.Valves comply with NACE requirement 1
AMU-153HV-0462
AMU-153HV-0502 2.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0463
AMU-153HV-0503 10497 / ISO 607
AMU-153HV-0464
AMU-153HV-0504 3.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0465
AMU-153HV-0518 Stem, self-relieving seats
AMU-153HV-0467
L1 AMU-153HV-0519
AMU-153HV-0468 4.All SS material shall be dual certified
AMU-153HV-0528
AMU-153HV-0470
AMU-153HV-0529
AMU-153HV-0471
AMU-153HV-0530
AMU-153HV-0472
AMU-153HV-0531
AMU-153HV-0473
AMU-153HV-0542
N08 AMU-153HV-0475
AMU-153HV-0543 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0714
N01 AMU-153HV-0560 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0568 PMI MGP1-GP2-CPC-RA-7739-0008
N35 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
AMU-153HV-0579
N94 WELDING AMU-153HV-0580
AMU-153HV-0648
N27

H
N10b AMU-153HV-0649
H1

P22 AMU-153HV-0650
AMU-153HV-0651
N106

N10c Stem Seal

B AMU-153HV-0655
AMU-153HV-0656
W05 W04
AMU-153HV-0678
AMU-153HV-0694
AMU-153HV-0695
AMU-153HV-0696
Anti-Static Device AMU-153HV-0697
Ød

AMU-153HV-0702
Body Seal
AMU-153HV-0703 APPLICABLE STANDARDS:
AMU-153HV-0704
Design:API 608/ISO 17292 Face to Face Dimension: Neway Standard
AMU-507HV-0116
AMU-507HV-0117 Inspection & Test:API 598 End Connection: ASME B16.11(FNPT)
AMU-507HV-0118 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-507HV-0119 N106 LOCKING WASHER 1 ASTM A240 316/316L
AMU-507HV-0120 N94 STOP PLATE 1 ASTM A240 316/316L
P01 C01 S05 P08 P07 P02 AMU-507HV-0121 N46 DISK SPRING 2 17-4PH
AMU-507HV-0123 N35 YOKE 1 ASTM A572 GR50
AMU-507HV-0125 N27 ADAPTER 1 AISI 1045
AMU-507HV-0126
N10c SCREW 4 ISO 3506 A2-70
AMU-507HV-0127
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 RPTFE
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 RPTFE
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 8M S1
L P07 STUD 4 ASTM A193 B8M CL2
P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A182 F316/F316L
P01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Stem Seal Anti-Static Device Body A3
N46 Lock(not supplied) Shell Test 30 bar
Open Position Close Position NTS
Body Seal
P03
Ball Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Stem Anti-staic Ball
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
9
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150RLK001 1S42R 0 1/2x3/8 150 RF 108 13 9.5 89 60.5 35.1 7.9 4-Ø16 104 186 165 3.2
QFCL150RLK001 1S42R 0 3/4x1/2 150 RF 117 19 13 99 69.8 42.9 8.6 4-Ø16 100 186 165 3.5
QFCL150RLK001 1S42R 0 1x3/4 150 RF 127 25 19 108 79.2 50.8 9.7 4-Ø16 100 191 187 4.8 1. Fluid Service: Vent Gas,Sour Gas,HC Condensate, 1
Amine Drain,Lean Amine,Purge Gas,Acid Gas
1 2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1/2" Valve:
AMU-153HV-0930
1" Valve:
2
3/4" Valve: AMU-153HV-0128
AMU-153HV-0149 AMU-153HV-0140
AMU-153HV-0150 AMU-153HV-0158
1.Valves comply with NACE requirement 1
AMU-153HV-0164 AMU-153HV-0178
2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0166 AMU-153HV-0181
3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0223 AMU-153HV-0184
10497 / ISO 607
AMU-153HV-0226 AMU-153HV-0185
4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0237 AMU-153HV-0194
L1 Stem, self-relieving seats
AMU-153HV-0239 AMU-153HV-0196
5.All SS material shall be dual certified
AMU-153HV-0260 AMU-153HV-0211
AMU-153HV-0263 AMU-153HV-0251
AMU-153HV-0265 AMU-153HV-0252
AMU-153HV-0266 AMU-153HV-0253
N08 AMU-153HV-0268 AMU-153HV-0284
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0275 AMU-153HV-0522 External Painting MGP1-GP2-CPC-RA-7754-0005
N01
AMU-153HV-0279 AMU-153HV-0523 PMI MGP1-GP2-CPC-RA-7739-0008
N35 AMU-153HV-0280 AMU-153HV-0537 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
WELDING AMU-153HV-0283 AMU-153HV-0538
N94
AMU-153HV-0355 AMU-153HV-0539
H1

N27 AMU-153HV-0356 AMU-153HV-0657

H
N10b
AMU-153HV-0357 AMU-153HV-0658
P22
AMU-153HV-0391 AMU-153HV-0660
N106 AMU-153HV-0394 AMU-153HV-0661
N10c Stem Seal AMU-153HV-0397 AMU-153HV-0662
AMU-153HV-0508 AMU-153HV-0663
W05 W04 AMU-153HV-0511 AMU-153HV-0674
AMU-153HV-0512 AMU-153HV-0675
AMU-153HV-0517 AMU-153HV-0676
Anti-Static Device AMU-153HV-0545 AMU-153HV-0677
Ød0

AMU-153HV-0547
ØG

ØD
ØC
Ød

Body Seal AMU-153HV-0549

AMU-153HV-0551
APPLICABLE STANDARDS:
AMU-153HV-0791 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
1
AMU-153HV-0793 Inspection & Test:API 598 End Connection: ASME B16.5 RF
AMU-153HV-0796 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0798 N106 LOCKING WASHER 1 ASTM A240 316/316L
AMU-153HV-0825
N94 STOP PLATE 1 ASTM A240 316/316L
n-Ød1

AMU-153HV-0827
P01 C01 S05 P08 P07 P02 t 1.5 AMU-153HV-0844
N46 DISK SPRING 2 17-4PH
AMU-153HV-0846 N35 YOKE 1 ASTM A572 GR50
N27 ADAPTER 1 AISI 1045
N10c SCREW 4 ISO 3506 A2-70
N08 NUT 1 ISO 3506 A4-70
N10b SCREW 2 ISO 3506 A2-70
N01 LEVER 1 ASTM A350 LF2 issued for approval
W26a THRUST WASHER 1 PEEK
so

W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 2 INCONEL X-750 1
S05 SEAT INSERT 1 2 PEEK
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
S04 PACKING 1 GRAPHITE Primary seal 1
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
S01 GASKET 1 GRAPHITE Primary seal 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
C01 BALL 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P22 GLAND NUT 1 ISO 3506 A4-50
P08 NUT 4 ASTM A194 8MA 2

L P07 STUD 4 ASTM A193 B8MA 2

P06 GLAND 1 ASTM A276 316/316L
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A182 F316/F316L
P01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Locking Device
Anti-Static Device Body A3
Stem Seal N46 Lock(not supplied) Shell Test 30 bar
NTS
Body Seal Open Position Close Position
P03
Ball Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
P06 Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S04 S01 Spring
Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CSK098 1C22RP 3 2 150 RF 178 49 152 120.6 91.9 14.2 4-Ø19 ≥120 250 300 21.2
QFCL150CSK098 1C22RP 3 4 150 RF 229 100 229 190.5157.2 22.4 8-Ø19 ≥150 336 400 72.1
1. Fluid Service:Amine Drain,Lean Amine 1
1 2. Design Pressure:13.2~19.6Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
2" Valve: 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0169
2
AMU-153HV-0190
AMU-153HV-0192
AMU-153HV-0213
AMU-153HV-0216
AMU-153HV-0396
AMU-153HV-0418
AMU-153HV-0427
1.Valves comply with NACE requirement 1
AMU-153HV-0429
2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
4" Valve:
4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0604
Stem, self-relieving seats
5.All SS material shall be dual certified

L1
27 5 12 21 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
33 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
I
34
APPLICABLE STANDARDS:
22 01 10 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
15

H1
7 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
4 02 34 ADAPTER 1 AISI 1045
24 30
33 YOKE 1 ASTM A572 GR50

H
Welding 8
III 29 32 BOLT 4 A2-70 2

31 31 GASKET 1 Flexible Graphite 2

10
23 30 PACKING 1 GRAPHITE Primary seal 1
II
20 29 PACKING RING 1 ASTM A276 316/316L
27 LOCK PLATE 1 ASTM A240 316/316L
16 26 NUT 2 ASTM A194 2HM+Hot dip galvanizing 1
25 STUD 2 ASTM A193 B7M+Hot dip galvanizing 1
II I 24 BEARING 1 PEEK
ØG
ØD
ØC

Ød

23 THRUST PLATE 1 PEEK

Ⅳ
III 22 RETAINER 1 AISI 1065 2
24 21 BOLT 1 A2-70 2

20 ANTI-STATIC SPRING 2 INCONEL X-750 1

30 19 STOP SCREW 2 ASTM A276 420
18 NUT ASTM A194 2HM+Hot dip galvanizing 1 QTY.:6(2");8(4") 2
17 STUD ASTM A193 B7M+Hot dip galvanizing 1 QTY.:6(2");8(4") 2
29
n-Ød1

1.5 t 3 1 6 17 18 2 16 ANTI-STATIC BALL 2 INCONEL X-750 1 issued for approval

L 31 15 STOP PLATE 1 AISI 1045
14 NAME PLATE 1 ASTM A240 316L
32
23 12 WASHER 1 ASTM A240 316/316L
Open position 10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 08 GLAND 1 ASTM A276 316/316L 003 ISSUED FOR REVIEW

002 ISSUED FOR REVIEW
Jet Yu Jerry Clarence
Jet Yu Jerry Clarence-
22.05.2024

1 ASTM A182 F316/F316L 07.04.2024

07 STEM
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
06 SEAT INSERT 2 PEEK
05 LEVER 1 ASTM A352 LCB
04 GLAND FLANGE 1 ASTM A216 WCB
03 BALL 1 ASTM A182 F316/F316L
19 26 25 02 BODY CAP 1 ASTM A105N
Close position
01 BODY 1 ASTM A105N BOC-1933
NO. PART NAME QTY. MATERIAL Note MPG1
A3
Shell Test 32 bar
NTS
Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)
14
19 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150RLK006 1S42R 0 2 150 RF 178 49 152 120.6 91.9 14.2 4-Ø19 ≥120 250 300 21.2
1
1
1. Fluid Service: Amine Drain
2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

2" Valve:
AMU-153HV-0167
AMU-153HV-0168
AMU-153HV-0199 2

AMU-153HV-0200 1.Valves comply with NACE requirement 1

2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
5.All SS material shall be dual certified

L1
27 5 12 21
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
External Painting MGP1-GP2-CPC-RA-7754-0005
33 PMI MGP1-GP2-CPC-RA-7739-0008
I Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
34

22 01 10 APPLICABLE STANDARDS:
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
15 Inspection & Test:API 598 End Connection: ASME B16.5 RF

H1
7 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
4 02
24 30 34 ADAPTER 1 AISI 1045

H
Welding 8 33 YOKE
29 1 ASTM A572 GR50
III 32 BOLT
31 4 A2-70
10 31 GASKET 1 Flexible Graphite 1 Primary seal 1
23 II 30 PACKING 1 GRAPHITE
20 29 PACKING RING 1 ASTM A276 316/316L
16 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 8MA 2
25 STUD 2 ASTM A193 B8MA 2
II I
ØG
ØD
ØC

Ød

24 BEARING 1 PEEK
Ⅳ 23 THRUST PLATE 1 PEEK
III
22 RETAINER 1 ASTM A240 316/316L
24 21 BOLT 1 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750 1
19 STOP SCREW 2 ASTM A1082 UNS S31803
18 NUT 6 ASTM A194 8MA 2
29 17 STUD 6 ASTM A193 B8MA 2
n-Ød1

1.5 t 3 1 6 17 18 2
16 ANTI-STATIC BALL 2 INCONEL X-750 1
issued for approval
L 31 1 ASTM A240 316/316L
15 STOP PLATE
23 14 NAME PLATE 1 ASTM A240 316L
32 12 WASHER 1 ASTM A240 316/316L
Open position 10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
Ⅳ 08 GLAND 1 ASTM A276 316/316L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
07 STEM 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
06 SEAT INSERT 2 PEEK
05 LEVER 1 ASTM A352 LCB
04 GLAND FLANGE 1 ASTM A351 CF3M
26 25 03 BALL 1 ASTM A182 F316/F316L
19
02 BODY CAP 1 ASTM A182 F316/F316L
Close position 01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL Note MPG1
A3
Shell Test 30 bar
NTS
Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
14 2 Seat Test (Air) PACKAGE (AMU-A-50701)
19 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CS203 1C22P 3 2x1-1/2 150 RF 178 38 49 152 120.6 91.9 14.2 4-Ø19 105 225.5 300 17.5
QFCL150CS203 1C22P 3 3x2 150 RF 203 49 74 190 152.4 127 17.5 4-Ø19 160 241.5 300 24.5
1. Fluid Service: Lean Amine 1
1 2 2. Design Pressure:12.1~19.6Barg
3. Temperature : -29~250°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

2" Valve:
AMU-153HV-0326
2
AMU-153HV-0386
AMU-153HV-0488
AMU-153HV-0646
AMU-153HV-0647
1
AMU-153HV-0709
AMU-153HV-0933 1.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0943 2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
L1 3.Valves will be bi-directional, Anti-static, Anti-Blowout
3" Valve:
27 5 12 21 AMU-153HV-0328 Stem, self-relieving seats
AMU-153HV-0329 4.All SS material shall be dual certified
33 AMU-153HV-0331

34
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
22 External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
7
4 30 I
24

H
Welding 8
III 29
31 01 10 APPLICABLE STANDARDS:
10 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
23
Inspection & Test:API 598 End Connection: ASME B16.5 RF
02 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
34 ADAPTER 1 AISI 1045
33 YOKE 1 ASTM A572 GR50
II I 32 BOLT
Ød0

4 A2-70
ØG

Ød
ØD
ØC

Ⅳ 31 GASKET 1 GRAPHITE 2
II 30 PACKING 1 GRAPHITE Primary seal 1
20
29 PACKING RING 1 ASTM A276 316/316L
16 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 2H+Hot dip galvanizing 1

25 STUD 2 ASTM A193 B7+Hot dip galvanizing 1

n-Ød1

1.5 t 3 1 6 17 18 2 24 BEARING 1 PEEK

L III 23 THRUST PLATE 1 PEEK
22 RETAINER 1 AISI 1566
32
Open position 24
21 BOLT 1 ISO 3506 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750 1
19 STOP SCREW 2 ASTM A276 420
18 NUT ASTM A194 2H+Hot dip galvanizing 1 QTY.:4(2");6(3") 2

29 17 STUD ASTM A193 B7+Hot dip galvanizing 1 QTY.:4(2");6(3") 2 issued for approval
16 ANTI-STATIC BALL 2 INCONEL X-750 1
19 26 25 31 15 STOP PLATE 1 ASTM A240 45+Ni
23 14 NAME PLATE 1 ASTM A240 316L
Close position
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Ⅳ 08 GLAND 1 ASTM A276 316/316L 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT INSERT 2 PEEK
05 LEVER 1 ASTM A352 LCB
14
19 04 GLAND FLANGE 1 ASTM A216 WCB
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A105N BOC-1933
01 BODY 1 ASTM A105N MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 32 bar NTS

Seat Test (Hyd.) 22 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CS212 1C24 3 2x1-1/2 150 RF 178 38 49 152 120.6 91.9 14.2 4-Ø19 105 225.5 300 17.5
1
1. Fluid Service: Nitrogen,Nitrogen / Lean Amine Vapors, 1
Plant Air,Hot Oil
2" Valve: 2. Design Pressure:12.1~19.6Barg
AMU-153HV-0143 3. Temperature : -29~250°C
AMU-153HV-0146 2 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0321 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0324
AMU-153HV-0620
AMU-153HV-0624
AMU-507HV-0065
AMU-507HV-0068
AMU-507HV-0089
AMU-507HV-0094
1
1.Valves end flange surface finish shall be 3.2 to 6.3 um
2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
L1 3.Valves will be bi-directional, Anti-static, Anti-Blowout
27 5 12 21 Stem, self-relieving seats
4.All SS material shall be dual certified
33
34

22 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
7 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
4 30 I
24

H
Welding 8
III 29
31 01 10
10 APPLICABLE STANDARDS:
23 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
02 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
34 ADAPTER 1 AISI 1045
33 YOKE 1 ASTM A572 GR50
II I
Ød0

32 SCREW
ØG

Ød
ØD
ØC

4 A2-70 2

Ⅳ 31 GASKET 1 GRAPHITE 2
II 30 PACKING 1 GRAPHITE Primary seal
20 1

29 PACKING RING 1 ASTM A276 316/316L

16 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 2H+Hot dip galvanizing 1

25 STUD 2 ASTM A193 B7+Hot dip galvanizing 1

n-Ød1

1.5 t 3 1 6 17 18 2 24 BEARING 1 PEEK

L III 23 THRUST PLATE 1 PEEK
Open position 24 22 RETAINER 1 AISI 1566
32 21 BOLT 1 ISO 3506 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750 1
19 STOP SCREW 2 ASTM A276 420
18 NUT 4 ASTM A194 2H+Hot dip galvanizing 1

29 17 STUD 4 issued for approval

ASTM A193 B7+Hot dip galvanizing 1

16 ANTI-STATIC BALL 2 INCONEL X-750 1

19 26 25 31
15 STOP PLATE 1 ASTM A240 45+Ni
Close position
23 14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F6a
06 SEAT INSERT 2 PEEK
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A216 WCB
03 BALL 1 ASTM A105N/ENP
02 BODY CAP 1 ASTM A105N BOC-1933
01 BODY 1 ASTM A105N MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 32 bar NTS

Seat Test (Hyd.) 22 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CSK095 1C22R/1C22RP 3 2x1-1/2 150 RF 178 38 49 152 120.6 91.9 14.2 4-Ø19 105 225.5 300 17.5
QFCL150CSK095 1C22RP 3 3x2 150 RF 203 49 74 190 152.4 127 17.5 4-Ø19 160 241.5 300 24.5
QFCL150CSK095 1C22R/1C22RP 3 4x3 150 RF 229 74 100 229 190.5157.2 22.4 8-Ø19 165 272 420 47 1. Fluid Service: Nitrogen,Lean Amine,Purge Gas, 1
Vent Gas,Amine Drain,HC Condensate,Fuel Gas
1 2
2. Design Pressure:13.2~19.6Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated
2" Valve: 3" Valve:
AMU-153HV-0332 2
AMU-153HV-0346
AMU-153HV-0333 AMU-153HV-0347
AMU-153HV-0348 AMU-153HV-0351
AMU-153HV-0349 4" Valve:
AMU-153HV-0352 AMU-153HV-0566
AMU-153HV-0350 AMU-153HV-0374
AMU-153HV-0363 AMU-153HV-0673
AMU-153HV-0375 AMU-153HV-0698 1.Valves comply with NACE requirement 1
AMU-153HV-0365 AMU-153HV-0376 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0366 AMU-153HV-0417 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0369 AMU-153HV-0420 10497 / ISO 607
L1 AMU-153HV-0370 AMU-153HV-0421 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0371 AMU-153HV-0422 Stem, self-relieving seats
27 5 12 21
AMU-153HV-0372 AMU-153HV-0424 5.All SS material shall be dual certified
AMU-153HV-0373 AMU-153HV-0425
33 AMU-153HV-0377 AMU-153HV-0532
34 AMU-153HV-0378 AMU-153HV-0710
AMU-153HV-0379 AMU-153HV-0713
22 AMU-153HV-0399 AMU-153HV-0611 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
AMU-153HV-0402 AMU-153HV-0613 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0403 PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
AMU-507HV-0043 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
7 AMU-153HV-0406
4 30 I AMU-153HV-0411
24

H
Welding 8 AMU-153HV-0415
III 29 AMU-153HV-0552
31 01 10 AMU-153HV-0553
10 APPLICABLE STANDARDS:
23 AMU-153HV-0561 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
AMU-153HV-0602 Inspection & Test:API 598 End Connection: ASME B16.5 RF
02 AMU-153HV-0672 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0679
34 ADAPTER 1 AISI 1045
AMU-153HV-0680
AMU-153HV-0683 33 YOKE 1 ASTM A572 GR50
II I
Ød0

32 BOLT
ØG

A2-70
Ød
ØD
ØC

AMU-153HV-0684 4
Ⅳ AMU-153HV-0711 31 GASKET 1 GRAPHITE 2
II AMU-153HV-0712 30 PACKING 1 GRAPHITE Primary seal 1
20 AMU-507HV-0099
AMU-153HV-0944
29 PACKING RING 1 ASTM A276 316/316L
16 AMU-153HV-0945 27 LOCK PLATE 1 ASTM A240 316/316L
AMU-153HV-0946 26 NUT 2 ASTM A194 2HM+Hot dip galvanizing 2
AMU-153HV-0949 25 STUD 2 ASTM A193 B7M+Hot dip galvanizing 2
n-Ød1

1.5 3 1 6 17 18 2 AMU-153HV-0952 24 BEARING PEEK

t 1
L AMU-153HV-0956
III 23 THRUST PLATE 1 PEEK
Open position 24 22 RETAINER 1 AISI 1566
32 21 BOLT 1 ISO 3506 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750 1
19 STOP SCREW 2 ASTM A276 420
18 NUT ASTM A194 2HM+Hot dip galvanizing 2 QTY.:4(2");6(3");8(4")
29 17 STUD ASTM A193 B7M+Hot dip galvanizing 2 QTY.:4(2");6(3");8(4")
issued for approval
16 ANTI-STATIC BALL 2 INCONEL X-750 1
19 26 25 31 1
15 STOP PLATE ASTM A240 45+Ni
Close position
23 14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Ⅳ 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT RING 2 PEEK
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A216 WCB
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A105N BOC-1933
01 BODY 1 ASTM A105N MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 32 bar NTS

Seat Test (Hyd.) 22 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
NR MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150RLK002 1S42R 0 2x1-1/2 150 RF 178 38 49 152 120.6 91.9 14.2 4-Ø19 105 225.5 300 17.5
QFCL150RLK002 1S42R 0 3x2 150 RF 203 49 74 190 152.4 127 17.5 4-Ø19 160 241.5 300 24.5
1. Fluid Service: Purge Gas,Vent Gas,Sour Gas,HC 1
1 2
Condensate,Amine Drain,Lean Amine,Demineralized Water
2. Design Pressure:14.3~19Barg
2" Valve: 3. Temperature : -29~160°C
AMU-153HV-0127 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0131 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0141
AMU-153HV-0147
AMU-153HV-0148
AMU-153HV-0156 2

AMU-153HV-0163 3" Valve:

AMU-153HV-0174 AMU-153HV-0153
AMU-153HV-0175 AMU-153HV-0154
AMU-153HV-0258 1.Valves comply with NACE requirement 1
AMU-153HV-0207
AMU-153HV-0259 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0208
AMU-153HV-0261 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0219
AMU-153HV-0262 10497 / ISO 607
L1 AMU-153HV-0221
4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0224
27 5 12 21 Stem, self-relieving seats
AMU-153HV-0233
5.All SS material shall be dual certified
AMU-153HV-0235
33 AMU-153HV-0245
AMU-153HV-0247
34
AMU-153HV-0269
AMU-153HV-0270 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
22 AMU-153HV-0272 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0273 PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
7 AMU-153HV-0274 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
4 30 I AMU-153HV-0276
24

H
Welding 8 AMU-153HV-0277
III 29 AMU-153HV-0278
31 01 10 AMU-153HV-0281
10 APPLICABLE STANDARDS:
AMU-153HV-0282 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
23 AMU-153HV-0330
Inspection & Test:API 598 End Connection: ASME B16.5 RF
AMU-153HV-0354
02 AMU-153HV-0389
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0390 34 ADAPTER 1 AISI 1045
AMU-153HV-0392 33 YOKE 1 ASTM A572 GR50
II I
Ød0

AMU-153HV-0393 32 BOLT
ØG

Ød
ØD
ØC

4 A2-70 2

Ⅳ AMU-153HV-0509 31 GASKET 1 GRAPHITE 2

II AMU-153HV-0510
30 PACKING 1 GRAPHITE Primary seal
20 AMU-153HV-0513
1

AMU-153HV-0514 29 PACKING RING 1 ASTM A276 316/316L

16 AMU-153HV-0533 27 LOCK PLATE 1 ASTM A240 316/316L
AMU-153HV-0642 26 NUT 2 ASTM A194 8MA 2
AMU-153HV-0643 25 STUD
AMU-153HV-0644
2 ASTM A193 B8MA 2
n-Ød1

1.5 t 3 1 6 17 18 2 24 BEARING 1 PEEK

AMU-153HV-0645
L III AMU-153HV-0668 23 THRUST PLATE 1 PEEK
Open position 24 AMU-153HV-0708 22 RETAINER 1 ASTM A240 316
32 AMU-153HV-0950 21 BOLT 1 ISO 3506 A2-70
30 AMU-153HV-0954
20 ANTI-STATIC SPRING 2 INCONEL X-750 1
AMU-153HV-0955
19 STOP SCREW 2 ASTM A1082 UNS S31803
18 NUT ASTM A194 8MA 2 QTY.:4(2");6(3") 2

29 17 STUD ASTM A193 B8MA 2 QTY.:4(2");6(3") 2 issued for approval

16 ANTI-STATIC BALL 2 INCONEL X-750 1
19 26 25 31
15 STOP PLATE 1 ASTM A240 316
Close position
23 14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT RING 2 PEEK
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A351 CF8M
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A182 F316/F316L BOC-1933
01 BODY 1 ASTM A182 F316/F316L MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 30 bar NTS

Seat Test (Hyd.) 21 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
6
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150RL005 1S45/1S47 0 2x1-1/2 150 RF 178 38 49 152 120.6 91.9 14.2 4-Ø19 105 225.5 300 17.5
QFCL150RL005 1S45 0 3x2 150 RF 203 49 74 190 152.4 127 17.5 4-Ø19 160 241.5 300 24.5
1. Fluid Service: Instrument Air,Antifoam Chemical,Drip 1
1 2 Tray Drain,Fresh Water
2. Design Pressure:14.8~19Barg
3. Temperature : -29~150°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

2" Valve:
AMU-153HV-0441
AMU-153HV-0449
AMU-153HV-0451 2

AMU-153HV-0474
AMU-153HV-0622 1.Valves comply with NACE requirement 1
AMU-153HV-0901 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0902 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-507HV-0129 10497 / ISO 607
L1 4.Valves will be bi-directional, Anti-static, Anti-Blowout
27 5 12 21 3" Valve: Stem, self-relieving seats
AMU-153HV-0900 5.All SS material shall be dual certified
33
34

22 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
7 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
4 30 I
24

H
Welding 8
III 29 APPLICABLE STANDARDS:
28 01 10 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
10
23 09 Inspection & Test:API 598 End Connection: ASME B16.5 RF
09 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
02 34 ADAPTER 1 AISI 1045
33 YOKE 1 ASTM A572 GR50
32 BOLT 4 A2-70
II I
Ød0

31 GASKET 1
ØG

Ød
ØD
ØC

PTFE
Ⅳ 30 PACKING 1 GRAPHITE Primary seal 1
II 29 PACKING RING 1 ASTM A276 316/316L
20
27 LOCK PLATE 1 ASTM A240 316/316L
16 26 NUT 2 ASTM A194 8M S1
25 STUD 2 ASTM A193 B8M(2)
24 BEARING 1 RPTFE
n-Ød1

1.5 t 3 1 6 17 18 2 23 THRUST PLATE 1 RPTFE

L III 22 RETAINER 1 ASTM A240 316
Open position 24 21 BOLT 1 ISO 3506 A2-70
32 20 ANTI-STATIC SPRING 2 INCONEL X-750 1
30 19 STOP SCREW 2 ASTM A1082 UNS S31803
18 NUT ASTM A194 8M S1 QTY.:4(2");6(3") 2

17 STUD ASTM A193 B8M(2) QTY.:4(2");6(3") 2

29 16 ANTI-STATIC BALL 2 INCONEL X-750 1 issued for approval

15 STOP PLATE 1 ASTM A240 316
19 26 25 31
14 NAME PLATE 1 ASTM A240 316L
Close position
23 12 WASHER 1 ASTM A240 316/316L
10 GASKET 1 316L SS + Flexible Graphite 1 Primary seal 1 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 09 GASKET 1 PTFE 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT RING 2 RPTFE
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A351 CF8M
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A182 F316/F316L BOC-1933
01 BODY 1 ASTM A182 F316/F316L MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 30 bar NTS

Seat Test (Hyd.) 21 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1

Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
NT MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H H2 M N H3 P Weight/Kg
QFCL150RLK004 1S42R 0 10 150 RF 533 252 406 362 323.8 28.412-Ø25 310.5 331 56 315 112 500 410
QFCL150RLK004 1S42R 0 6 150 RF 394 150 279 241.3 215.9 23.9 8-Ø22 227 257 57 196 31 400 155
1. Fluid Service: Vent Gas 1
1 2
2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1.Valves comply with NACE requirement 1

6" Valve: 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0238 2 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0240 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
10" Valve: Stem, self-relieving seats
N47 AMU-153HV-0129 5.All SS material shall be dual certified
AMU-153HV-0130
P10c
AMU-153HV-0138
P19 AMU-153HV-0139
P10b
W04
Q N93 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
External Painting MGP1-GP2-CPC-RA-7754-0005
P07 P08
PMI MGP1-GP2-CPC-RA-7739-0008
Stem Seal
W30 APPLICABLE STANDARDS: Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001

W26
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
Seat Seat
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
W05 W03
N93 LIFTING LUG 2 ASTM A572 GR50
P
N92 SUPPORT LEG 2 ASTM A572 GR50
ØG
ØD
ØC

Ød

N47 TOP FLANGE 1 ASTM A182 F316/F316L

C01 N08d NUT ASTM A194 8MA 2 QTY.:4(6");8(10")
N07d STUD ASTM A193 B8MA 2 QTY.:4(6");8(10")
W73
N05 GEARBOX 1 DUCTILE IRON
P02 N03 HANDWHEEL 1 ASTM A283 GRD
W73 SUPPORT PLATE 1 ASTM A572 GR50
P01 W30a BEARING 1 316L+PTFE
W30 BEARING 2 316L+PTFE
W26a THRUST WASHER 1 RPTFE
DRAIN Body Seal
W26 THRUST WASHER 2 RPTFE
n-Ød1

1.5 t CONN. W05 SPRING 2 INCONEL X-750 1

W04 STEEL BALL 1 INCONEL X-750 1
L W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING INCONEL X-750 1 QTY.:16(6");24(10")
S05 SEAT INSERT 2 PEEK
S04 PACKING 1 GRAPHITE Fire safe seal 1
Locking Device
M N S02h O-RING 1 FKM LT
N05 N92 N07d N08d Lock(not supplied)
S02g O-RING 1 FKM LT
S02e O-RING 1 FKM LT Primary seal 1
S02c O-RING 2 FKM LT Primary seal 1
P

Primary seal
H3

S02a O-RING 2 FKM LT 1

S02 O-RING 2 FKM LT Primary seal 1

VENT
S01f GASKET 2 316L SS + Flexible Graphite 1 issued for approval
CONN. S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
H

Seat(SPE) S01a GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1

C.S. Handwheel S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
N03
C02 SEAT RETAINER 1 ASTM A182 F316/F316L
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 1 2 ASTM A182 F316/F316L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A182 F316/F316L
H2

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024

P10c SCREW ASTM A193 B8MA 2 QTY.:5(6");6(10")
OPEN P10b SCREW ASTM A193 B8MA 2 QTY.:6(6");8(10") 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 8MA 2
P08 NUT ASTM A194 8MA 2 QTY.:12(6");20(10")
P07d STUD 8 ASTM A193 B8MA 2
S02h C02 S02a W01 S01a S05 P07 STUD ASTM A193 B8MA 2 QTY.:12(6");20(10")
Stem Seal P03 STEM 1 ASTM A182 F316/F316L
S02g Drain & Vent connection P02 BODY CAP 1 ASTM A182 F316/F316L
Stem Injection Point(Q) P01 BODY 1 ASTM A182 F316/F316L BOC-1933
1
P03 NO. PART NAME QTY. MATERIAL NOTE MPG1
A3
S04 Shell Test 30 bar
S01f NTS
S02c Body Seal
Seat Test (Hyd.) 21 bar
P23 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
S01c Body cap C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S02 2 Seat Test (Air) PACKAGE (AMU-A-50701)
S02e P07d P08d
S01
W26a Body B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
Planform W30a A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
NU MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H H2 M N H3 P Weight/Kg
QFCL150RLK003 1S42R 0 8x6 150 RF 457 201 150 343 298.4 269.7 26.9 8-Ø22 227 257 57 196 31 400 185
1 2 1. Fluid Service: Acid Gas 1
2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

8" Valve:
AMU-153HV-0250 2
AMU-153HV-0254
AMU-153HV-0255
AMU-153HV-0534
AMU-153HV-0535
AMU-153HV-0536 1.Valves comply with NACE requirement 1

AMU-153HV-0540 2.Valves end flange surface finish shall be 3.2 to 6.3 um

AMU-153HV-0541 3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
N47
Stem, self-relieving seats
P10c 5.All SS material shall be dual certified
P19

P10b
W04
Q N93

P07 P08 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
Stem Seal
W30 PMI MGP1-GP2-CPC-RA-7739-0008
W26
APPLICABLE STANDARDS: Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
Seat Seat
Inspection & Test:API 598 End Connection: ASME B16.5 RF
W05 W03
P
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N93 LIFTING LUG 2 ASTM A572 GR50
Ød0
ØG
ØD
ØC

Ød

N92 SUPPORT LEG 2 ASTM A572 GR50

C01 N47 TOP FLANGE 1 ASTM A182 F316/F316L
W73
N08d NUT 4 ASTM A194 8MA 2
N07d STUD 4 ASTM A193 B8MA 2
P02 N05 GEARBOX 1 DUCTILE IRON
N03 HANDWHEEL 1 ASTM A283 GRD
P01 W73 SUPPORT PLATE 1 ASTM A572 GR50
W30a BEARING 1 316L+PTFE
W30 BEARING 2 316L+PTFE
DRAIN Body Seal W26a THRUST WASHER 1 RPTFE
n-Ød1

1.5 t CONN.
W26 THRUST WASHER 2 RPTFE
W05 SPRING 2 INCONEL X-750 1
L W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING 8 INCONEL X-750 1
S05 SEAT INSERT 2 PEEK
S04 PACKING 1 GRAPHITE Fire safe seal 1
Locking Device
M N S02h O-RING 1 FKM LT
N05 N92 N07d N08d Lock(not supplied)
S02g O-RING 1 FKM LT
S02e O-RING 1 FKM LT Primary seal 1
S02c O-RING 2 FKM LT Primary seal 1
P

H3

S02a O-RING 2 FKM LT Primary seal 1

S02 O-RING 2 FKM LT Primary seal 1

Q VENT
S01f GASKET 2 316L SS + Flexible Graphite 1 issued for approval
CONN. S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
H

Seat(SPE) S01a GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1

N C.S. Handwheel
P N S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
N03 C02 SEAT RETAINER 1 ASTM A182 F316/F316L
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 1 2 ASTM A182 F316/F316L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
H2

P19 COVER 1 ASTM A182 F316/F316L

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
P10c SCREW 5 ASTM A193 B8MA 2
OPEN P10b SCREW 6 ASTM A193 B8MA 2 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 8MA 2
P08 NUT 24 ASTM A194 8MA 2
P07d STUD 8 ASTM A193 B8MA 2
S02h C02 S02a W01 S01a S05 P07 STUD 24 ASTM A193 B8MA 2
P03 STEM 1 ASTM A182 F316/F316L
Stem Seal P02 BODY CAP 1 ASTM A182 F316/F316L
S02g Stem Injection Point(Q) BOC-1933
P01 BODY 1 ASTM A182 F316/F316L
Drain & Vent connection
P03 NO. PART NAME QTY. MATERIAL NOTE MPG1
1
A3
S04 Shell Test 30 bar
NTS
Body Seal
S02c
S01f Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
S01c Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S02 P23 C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S02e
S01
Body P07d P08d B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
W26a BASRA.OIL. COMPANY,IRAQ
Planform W30a A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
NV MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H H1 L1 Weight/Kg
QFCL600CSK046 6C22R 3 2x1-1/2 600 RF 292 49 38 165 127 91.9 25.4 8-Ø19 104 270 268 26
1 1. Fluid Service: Vent Gas,Purge Gas 1
2. Design Pressure:86.4~102.1Barg
APPLICABLE STANDARDS :
3. Temperature : -29~215°C
Design: API 6D/ISO 14313 4. Fire Test API 6FA / ISO 10497 / API 607
Face to Face Dimension: ASME B16.10 Long Pattern 5. All dimensions are in millimeter otherwise stated
Inspection & Test: API 598
2" Valve: End Dimension: ASME B16.5 RF
AMU-153HV-0010
AMU-153HV-0015
2 Fugitive Emission Class:ISO 15848-1 Class B
AMU-153HV-0043 Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0048 64 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
AMU-153HV-0056 63 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
AMU-153HV-0084 1.Valves comply with NACE requirement 1
62 FLANGE 1 ASTM A105N 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0446
61 GASKET 1 316L SS + Flexible Graphite 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0951
60 ADAPTER 1 AISI 1045 10497 / ISO 607
59 YOKE 1 ASTM A572 GR50 4.Valves will be bi-directional, Anti-static, Anti-Blowout
43 42 41 40 39 38 36 35 56 Stem, self-relieving seats
55 32 31 30 29 54 58 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
5.All SS material shall be dual certified
57 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1

56 WASHER 1 ASTM A240 304

55 BOLT 1 ISO 3506 A2-70
60 54 LEVER 1 ASTM A352 LCB
53 RIVET 2 ASTM A276 316L Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
59 External Painting MGP1-GP2-CPC-RA-7754-0005
52 NAME PLATE 1 ASTM A240 316L
PMI MGP1-GP2-CPC-RA-7739-0008
57 58 49 SEAT INSERT 2 PEEK Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
48 SPRING 2 INCONEL X-750 1
H

26 47 FIRE SAFE SEAL 2 316L SS + Flexible Graphite 1

46 O RING 2 FKM LT AED

H1
24 45 SEAT RETAINER 2 ASTM A182 F316/F316L
I
23
43 STUD 6 ASTM A193 B7M+Hot dip galvanizing 1
42 NUT 6 ASTM A194 2HM+Hot dip galvanizing 1
22 41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

20 40 O RING 1 FKM LT AED Primary seal 1

19 39 COVER 1 ASTM A105N

18 38 SCREW 4 ASTM A193 B7M+Zn.Ni.Xylan1070 2
STL.20 thermal spray
C I 36 FIRE SAFE SEAL 1 316L SS + Flexible Graphite 1 Fire safe seal 1
Ød0
Ød
ØG
ØD

ØC

STL.6 thermal spray 35 RETAINER 1 AISI 1066

17 45 46 47 48 49 32 STEM 1 ASTM A182 F316/F316L
16 31 STOP PLATE 1 AISI 1045
30 SCREW 2 ASTM A193 B7M+Zn.Ni.Xylan1070 2
29 TOP FLANGE 1 ASTM A105N
13 26 O RING 1 FKM LT AED
11 24 O RING 2 FKM LT AED Primary seal 1

23 PIN 1 ASTM A276 316/316L

n-Ød1

2 1 9 5
6.4 t
22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
3 6
20 O RING 1 FKM LT AED Primary seal 1
4 7 8 19 THRUST WASHER 1 R-PTFE
61 18 BEARING 1 316L+PTFE issued for approval
62
17 ANTI-STATIC BALL 1 INCONEL X-750 1
63 64
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
L
13 SEAT ASSEMBY 2 45&49
VIEW C Open Position 11 BEARING 1 316L+PTFE
9 O RING 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
1 FKM LT AED Primary seal 1

8 NUT 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024

4 ASTM A194 2HM+Zn.Ni.Xylan1070 2
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
52 53 7 STUD 4 ASTM A193 B7M+Zn.Ni.Xylan1070 2 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
6 GASKET 1 316L SS + Flexible Graphite Fire safe seal 1

5 TRUNNION 1 ASTM A182 F316/F316L

4 COVER FLANGE 1 ASTM A105N
3 BALL 1 ASTM A182 F316/F316L
2 BODY CAP 1 ASTM A105N
Close Position 1 BODY 1 ASTM A105N BOC-1933
No. Part Name QTY. Material Note MPG1
A3
Shell Test 154 bar
NTS
Seat Test (Hyd.) 113 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
OM MMQ
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H H1 L1 Weight/Kg
QFCL600RLK005 6S42R 0 2x1-1/2 600 RF 292 49 38 165 127 91.9 25.4 8-Ø19 104 270 268 26
1 1. Fluid Service: Vent Gas,HC Condensate 1
2. Design Pressure:69.9~99.3Barg
APPLICABLE STANDARDS :
3. Temperature : -29~215°C
2" Valve: Design: API 6D/ISO 14313 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0019 Face to Face Dimension: ASME B16.10 Long Pattern 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0020
AMU-153HV-0023
Inspection & Test: API 598
AMU-153HV-0024 End Dimension: ASME B16.5 RF
AMU-153HV-0028 2 Fugitive Emission Class:ISO 15848-1 Class B
AMU-153HV-0029 Closure Test Leakage Rate:ISO 5208 Rate A
AMU-153HV-0032 64 NUT 4 ASTM A194 8MA 2
AMU-153HV-0033
AMU-153HV-0506
63 STUD 4 ASTM A193 B8MA 2 1.Valves comply with NACE requirement 1
62 FLANGE 1 ASTM A182 F316/F316L 2.Valves end flange surface finish shall be 3.2 to 6.3 um
61 GASKET 1 316L SS + Flexible Graphite 3.Fire testing & certification shall be as per API 6FA / ISO
60 ADAPTER 1 AISI 1045 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
59 YOKE 1 ASTM A572 GR50 Stem, self-relieving seats
43 42 41 40 39 38 36 35 56 55 32 31 30 29 54 58 NUT 4 ASTM A194 8MA 2
5.All SS material shall be dual certified
57 STUD 4 ASTM A193 B8MA 2

56 WASHER 1 ASTM A240 304

55 BOLT 1 ISO 3506 A2-70
54 LEVER 1 ASTM A352 LCB
60 53 RIVET 2 ASTM A276 316L Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
59 52 NAME PLATE 1 ASTM A240 316L External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
57 58 49 SEAT INSERT 2 PEEK Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
48 SPRING 2 INCONEL X-750 1

47 FIRE SAFE SEAL 2 316L SS + Flexible Graphite

H

26 1

46 O RING 2 FKM LT AED

H1
45 SEAT RETAINER 2 ASTM A182 F316/F316L
24 43 STUD
I 6 ASTM A193 B8MA 2
23 42 NUT 6 ASTM A194 8MA 2

22 41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

20
40 O RING 1 FKM LT AED Primary seal 1

19
39 COVER 1 ASTM A182 F316/F316L
38 SCREW 4 ASTM A193 B8MA 2
18
STL.20 thermal spray 36 FIRE SAFE SEAL 1 316L SS + Flexible Graphite 1 Fire safe seal 1
C I
35 RETAINER 1 ASTM A240 316
Ød0
Ød
ØG
ØD

ØC

STL.6 thermal spray

17 45 46 47 48 49 32 STEM 1 ASTM A182 F316/F316L

31 STOP PLATE 1 ASTM A240 316/316L
16
30 SCREW 2 ASTM A193 B8MA 2
29 TOP FLANGE 1 ASTM A182 F316/F316L
13 26 O RING 1 FKM LT AED
24 O RING 2 FKM LT AED Primary seal 1
11
23 PIN 1 ASTM A276 316/316L
n-Ød1

9 5
6.4 t 2 1 22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

3 6 20 O RING 1 FKM LT AED Primary seal 1

4 7 8 19 THRUST WASHER 1 R-PTFE

18 BEARING 1 316L+PTFE
61
17 ANTI-STATIC BALL
issued for approval
1 INCONEL X-750 1
62 63 64 16 ANTI-STATIC SPRING 1 INCONEL X-750 1
L 13 SEAT ASSEMBY 2 45&49
Open Position 11 BEARING 1 316L+PTFE
VIEW C 9 O RING 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
1 FKM LT AED Primary seal 1

8 NUT 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024

6 ASTM A194 8MA 2
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
7 STUD 6 ASTM A193 B8MA 2
52 53 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
6 GASKET 1 316L SS + Flexible Graphite Fire safe seal 1

5 TRUNNION 1 ASTM A182 F316/F316L

4 COVER FLANGE 1 ASTM A182 F316/F316L
3 BALL 1 ASTM A182 F316/F316L
Close Position 2 BODY CAP 1 ASTM A182 F316/F316L
1 BODY 1 ASTM A182 F316/F316L BOC-1933
No. Part Name QTY. Material Note MPG1
A3
Shell Test 150 bar
NTS
Seat Test (Hyd.) 110 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
2 Seat Test (Air) PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H P H1 H2 M N H3 Weight/Kg
QFCL600CSK049 6C22R 3 3 600 RF 356 74 210 168.1 127 31.8 8-Ø22 ≥100 300 148.5 100 57 221 31 66
1 2 1. Fluid Service: Vent Gas 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

APPLICABLE STANDARDS :
Design: API 6D/ISO 14313
Face to Face Dimension: ASME B16.10 Long Pattern
3" Valve:
AMU-153HV-0007
Inspection & Test: API 598 1.Valves comply with NACE requirement 1

AMU-153HV-0009 End Dimension: ASME B16.5 RF 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0053 2
Fugitive Emission Class:ISO 15848-1 Class B 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0054 Closure Test Leakage Rate:ISO 5208 Rate A 10497 / ISO 607
60 4.Valves will be bi-directional, Anti-static, Anti-Blowout
64 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
ASTM A193 B7M+Hot dip galvanizing
Stem, self-relieving seats
57 63 STUD 4 1
5.All SS material shall be dual certified
62 FLANGE 1 ASTM A105N
61 GASKET 1 316L SS + Flexible Graphite
32 60 ADAPTER 1 AISI 1045
35 59 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
31
36 58 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
30 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
43 42 41 40 39 38 57 YOKE 1 ASTM A572 GR50 External Painting MGP1-GP2-CPC-RA-7754-0005
29 56 GEAR BOX 1 DUCTILE IRON PMI MGP1-GP2-CPC-RA-7739-0008
H

26 55 NUT 8 ASTM A194 2HM+Hot dip galvanizing 1 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
54 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
25
53 RIVET 2 ASTM A276 316L
24 52 NAME PLATE 1 ASTM A240 316L
23 49 SEAT INSERT 2 PEEK
48 SPRING 2 ASTM B637 UNS N07750
22 47 FIRE SAFE SEAL 2 GRAPHITE Fire safe seal 1
20 46 O RING 2 FKM LT AED Primary seal 1
I
19 45 SEAT RETAINER 2 ASTM A182 F316/F316L
43 STUD 12 ASTM A193 B7M+Hot dip galvanizing 1
18
42 NUT 12 ASTM A194 2HM+Hot dip galvanizing 1
I 41 GASKET 1 316L SS + Flexible Graphite 1
ØG
ØD
ØC

Ød

40 O RING 1 FKM LT AED

17 39 COVER 1 ASTM A105N
16 38 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
STL.20 thermal spray
36 FIRE SAFE SEAL 1 GRAPHITE Fire safe seal 1
STL.6 thermal spray 35 RETAINER 1 ASTM A276 316/316L
13 45 46 47 48 49 32 STEM 1 ASTM A182 F316/F316L
31 STOP PLATE 1 ASTM A240 316/316L
11
30 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
n-Ød1

2 1 9 5
6.4 t Anti-Static Device Stem Seal
29 TOP FLANGE 1 ASTM A105N
3 6 26 O RING 1 FKM LT AED
Stem 26
25 PIN 1 ASTM A276 316/316L
4 7 8 16 Body 36 24 O RING 2 FKM LT AED Primary seal 1
61 17 Ball 23 PIN 1 ASTM A276 316/316L
24
22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
62 63 64 22
20 O RING 1 FKM LT AED Primary seal 1 issued for approval
20 19 THRUST WASHER 1 R-PTFE
L Stem 18 BEARING 1 316L+PTFE
Body 19 17 ANTI-STATIC BALL 1 INCONEL X-750 1
M 18
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
12 N 17 12 HANDWHEEL 1 ASTM A283 GRD
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
56 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
16 11 BEARING 1 316L+PTFE
9 O RING 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
1 FKM LT AED Primary seal 1
8 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
55 54 52 53
ØP

58 59
H3

7 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1

6 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
H2

5 TRUNNION 1 ASTM A182 F316/F316L

4 COVER FLANGE 1 ASTM A105N
3 BALL 1 ASTM A182 F316/F316L
2 BODY CAP 2 ASTM A105N BOC-1933
H1

1 BODY 1 ASTM A105N MPG1

No. Part Name QTY. Material NOTE A3
Shell Test 154 bar NTS

Seat Test (Hyd.) 113 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES
FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H H2 M N H3 P Weight/Kg
QFCL600CSK047 6C22R 3 10x8 600 RF 787 252 201 508 431.8 323.8 63.516-Ø35 271 306 101 300 56 600 520
QFCL600CSK047 6C22R 3 14x10 600 RF 889 334 252 603 527 412.8 69.820-Ø38 325 353 126 371 60 600 900
1. Fluid Service: Sour Gas,Vent Gas 1
1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

10" Valve:
AMU-153HV-0103 2

AMU-153HV-0104
AMU-153HV-0108
AMU-153HV-0109
1.Valves comply with NACE requirement 1
AMU-153HV-0110
2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0112
3.Fire testing & certification shall be as per API 6FA / ISO
N47
10497 / ISO 607
14" Valve:
P10c 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0004
Stem, self-relieving seats
P19 AMU-153HV-0005
5.All SS material shall be dual certified
P10b
AMU-153HV-0016
W04 AMU-153HV-0018
Q N93
AMU-153HV-0044
P07 P08
AMU-153HV-0045
Stem Seal
W30 APPLICABLE STANDARDS: Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
W26 Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern External Painting MGP1-GP2-CPC-RA-7754-0005
Locking Device PMI MGP1-GP2-CPC-RA-7739-0008
Inspection & Test:API 598 End Connection: ASME B16.5 RF Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
Lock(not supplied)
Seat
W05 W03
Seat Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
P N93 LIFTING LUG 2 ASTM A572 GR50
N92 SUPPORT LEG 2 ASTM A572 GR50
Ød0
ØG
ØD
ØC

Ød

N47 TOP FLANGE 1 ASTM A105N

C01
N35 YOKE 1 ASTM A572 GR50
W73 N08d NUT 4(8"),8(10") ASTM A194 2HM+Hot dip galvanizing 1
N08b NUT 8(8"),16(10") ASTM A194 2HM+Hot dip galvanizing 1
P02
C.S. Handwheel
N07d STUD 4(8"),8(10") ASTM A193 B7M+Hot dip galvanizing 1
N07b STUD 4(8"),8(10") ASTM A193 B7M+Hot dip galvanizing 1
P01 N03 N05 GEARBOX 1 DUCTILE IRON
N03 HANDWHEEL 1 ASTM A283 GRD
W73 SUPPORT PLATE 2 ASTM A572 GR50
DRAIN Body Seal W30a BEARING 1 316L+PTFE
n-Ød1

1.5 t CONN.
W30 BEARING 2 316L+PTFE
OPEN
W26a THRUST WASHER 2 RPTFE
L W26 THRUST WASHER 2 RPTFE
W05 SPRING 1 INCONEL X-750 1
W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
M N05 N35 N92 N W01 SPRING 28(8"),32(10") INCONEL X-750 1
S05 SEAT 2 PEEK
S04 PACKING 1 GRAPHITE Fire safe seal 1

N07d N08d
S02h O-RING 2 FKM LT AED
P

H3

S02g O-RING 1 FKM LT AED

S02e O-RING 1 FKM LT AED Primary seal 1
S02c O-RING 2 FKM LT AED Primary seal 1
N07b N08b
S02a O-RING 2 FKM LT AED Primary seal 1
S02 O-RING 2 FKM LT AED Primary seal 1
S01f GASKET 1 316L SS + Flexible Graphite 1 issued for approval
Q VENT
CONN. S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
H

Seat(SPE) Fire safe seal

S01a GASKET 2 316L SS + Flexible Graphite 1 1
N P N STL.6 thermal spray
S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
C01 BALL 1 ASTM A182 F51 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A105N 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
H2

P19 COVER 1 ASTM A105N

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
P10c SCREW 5(8"),6(10") ASTM A193 B7M+Hot dip galvanizing 1
P10b SCREW 6(8"),8(10") ASTM A193 B7M+Hot dip galvanizing 1 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 2HM+Hot dip galvanizing 1

STL.20 thermal spray P08 NUT 36 ASTM A194 2HM+Hot dip galvanizing 1
P07d STUD 8 ASTM A193 B7M+Hot dip galvanizing 1
S02h C02 S02a W01 S01a S05 P07 STUD 36 ASTM A193 B7M+Hot dip galvanizing 1
P03 STEM 1 ASTM A182 F316/F316L
Stem Seal P02 BODY CAP 2 ASTM A105N
P01 BODY 1 ASTM A105N BOC-1933
S02g Stem Injection Point(Q)
NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 A3
Drain & Vent connection Shell Test 154 bar
S04 1 NTS
Body Seal
S02c
Seat Test (Hyd.) 113 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S01c S02 S01f
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar
PACKAGE (AMU-A-50701)
S01
S02e
Body P23 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
Planform P07d P08d A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
W30a

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 Weight/Kg
QFCL150CSK094 1C22RP 3 6x4 150 RF 394 150 100 83
1. Fluid Service: Lean Amine 1
2. Design Pressure:13.2~19.6Barg
3. Temperature : -29~215°C
B16.5 RF 4. Fire Test API 6FA / ISO 10497 / API 607
APPLICABLE STANDARDS : 5. All dimensions are in millimeter otherwise stated
Design: API 6D/ISO 14313
6" Valve: Face to Face Dimension: ASME B16.10 Long Pattern
AMU-153HV-0195
2
Inspection & Test: API 598
AMU-153HV-0197 End Dimension: ASME B16.5 RF
D C G t n-d1 f

ØG
ØD
ØC
AMU-153HV-0597 Fugitive Emission Class:ISO 15848-1 Class B
AMU-153HV-0599 279 241.3 215.9 23.9 8-22 1.5 1
Closure Test Leakage Rate:ISO 5208 Rate A
50 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1 1.Valves comply with NACE requirement
49 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1 2.Valves end flange surface finish shall be 3.2 to 6.3 um
47 HANDWHEEL 1 ASTM A283 GRD 3.Fire testing & certification shall be as per API 6FA / ISO
f 46 FIRE SAFE SEAL 2 GRAPHITE Fire safe seal 1
10497 / ISO 607
t 4.Valves will be bi-directional, Anti-static, Anti-Blowout
45 SEAT LIPSEAL 2 ELGILOY +PTFE Primary seal 1
Stem, self-relieving seats
44 SEAT RETAINER 2 ASTM A182 F316/F316L 5.All SS material shall be dual certified

n-d1
I 43 STUD 6 ASTM A193 B7M+Hot dip galvanizing 1
3mm 316L overlay 42 NUT 6 ASTM A194 2HM+Hot dip galvanizing 1

47 41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

40 BODY LIPSEAL 1 ELGILOY +PTFE Primary seal 1

Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
33 39 COVER 1 ASTM A105N External Painting MGP1-GP2-CPC-RA-7754-0005
38 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1 PMI MGP1-GP2-CPC-RA-7739-0008
37 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
37 36 32
36 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1

38 30 29 35 SEAT INSERT 2 PEEK

31 34 SPRING 2 INCONEL X-750 1
39
21 44 45 46 34 35 33 GEAR 1 NODULAR IRON
40 28 32 STEM 1 ASTM A182 F316/F316L
41 27 31 GLAND FLANGE 1 ASTM A216 WCB
25 26 30 STUD 2 ASTM A193 B7M+Hot dip galvanizing 1
43 42 29 NUT 2 ASTM A194 2HM+Hot dip galvanizing 1

13 24 28 YORK 1 ASTM A572 GR50

27 GLAND 1 ASTM A276 316/316L
23
26 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
14 15 25 NUT 4 ASTM A194 2HM+Hot dip galvanizing
22 1
24 PACKING 1 GRAPHITE
20 23 PIN 1 ASTM A276 316/316L
19 22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

21 RETAINER 2 ASTM A276 316/316L

18
20 COVER LIPSEAL 1 ELGILOY +PTFE Primary seal 1
I 19 THRUST WASHER 1 RPTFE
Ød0
Ød

18 BEARING 1 316L+PTFE
17 17 ANTI-STATIC BALL 1 INCONEL X-750 1
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
16
15 RIVET 2 ASTM A276 316L
14 NAME PLATE 1 ASTM A240 316L issued for approval
13 SEAT ASSEMBY 2 45&35
12 COVER FLANGE 1 ASTM A105N
11 BEARING 1 316L+PTFE
11 10 FLANGE 1 ASTM A105N
5 1

9 GASKET 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

1 316L SS + Flexible Graphite 1
6 8 NUT 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
4 ASTM A194 2HM+Hot dip galvanizing 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
7 8 7 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
6 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
2 1 3 4
12 5 TRUNNION 1 ASTM A182 F316/F316L
9 4 TRUNNION LIPSEAL 1 ELGILOY +PTFE Primary seal 1
3 BALL 1 ASTM A182 F316/F316L
10 49 50 2 BODY CAP 1 ASTM A105N
1 BODY 1 ASTM A105N BOC-1933
L No. Part Name QTY. Material Note MPG1
A3
Shell Test 32 bar
NTS
Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
2 Seat Test (Air) PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 Weight/Kg
QFCL150RLK003 1S42R 0 6x4 150 RF 394 150 100 83
1. Fluid Service: Lean Amine 1
2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
6" Valve: B16.5 RF 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0187 APPLICABLE STANDARDS : 5 . All dimensions are in millimeter otherwise stated
AMU-153HV-0212
2 Design: API 6D/ISO 14313
Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test: API 598
D C G t n-d1 f End Dimension: ASME B16.5 RF

ØG
ØD
ØC
279 241.3 215.9 23.9 8-22 1.5 Fugitive Emission Class:ISO 15848-1 Class B
1
Closure Test Leakage Rate:ISO 5208 Rate A
50 STUD 4 ASTM A193 B8MA 2 1.Valves comply with NACE requirement
49 NUT 4 ASTM A194 8MA 2 2.Valves end flange surface finish shall be 3.2 to 6.3 um
47 HANDWHEEL 1 ASTM A283 GRD 3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
f 46 FIRE SAFE SEAL 2 GRAPHITE Fire safe seal 1
t 4.Valves will be bi-directional, Anti-static, Anti-Blowout
45 SEAT LIPSEAL 2 ELGILOY +PTFE Primary seal 1
Stem, self-relieving seats
44 SEAT RETAINER 2 ASTM A182 F316/F316L 5.All SS material shall be dual certified

n-d1
I 43 STUD 6 ASTM A193 B8MA 2

42 NUT 6 ASTM A194 8MA 2

47 41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

40 BODY LIPSEAL 1 ELGILOY +PTFE Primary seal 1

Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
33 39 COVER 1 ASTM A182 F316/F316L External Painting MGP1-GP2-CPC-RA-7754-0005
38 SCREW 4 ASTM A193 B8MA 2 PMI MGP1-GP2-CPC-RA-7739-0008
37 STUD 4 ASTM A193 B8MA 2 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
37 36 32
36 NUT 4 ASTM A194 8MA 2

38 30 29 35 SEAT INSERT 2 PEEK

31 34 SPRING 2 INCONEL X-750 1
39
21 44 45 46 34 35 33 GEAR 1 NODULAR IRON
40 28 32 STEM 1 ASTM A182 F316/F316L
41 27 31 GLAND FLANGE 1 ASTM A351 CF8M
25 26 30 STUD 2 ASTM A193 B8MA 2

43 42 29 NUT 2 ASTM A194 8MA 2

24 28 YORK 1 ASTM A572 GR50

13
27 GLAND 1 ASTM A276 316/316L
23
26 STUD 4 ASTM A193 B8MA 2
14 15 25 NUT 4 ASTM A194 8MA 2
22
24 PACKING 1 GRAPHITE
20 23 PIN 1 ASTM A276 316/316L
19 22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

21 RETAINER 2 ASTM A276 316/316L

18 Primary seal
20 COVER LIPSEAL 1 ELGILOY +PTFE 1
I 19 THRUST WASHER 1 RPTFE
Ød0
Ød

18 BEARING 1 316L+PTFE
17 17 ANTI-STATIC BALL 1 INCONEL X-750 1
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
16
15 RIVET 2 ASTM A276 316L
14 NAME PLATE 1 ASTM A240 316L
13 SEAT ASSEMBY 2 45&35
issued for approval
12 COVER FLANGE 1 ASTM A182 F316/F316L
11 BEARING 1 316L+PTFE
11 10 FLANGE 1 ASTM A182 F316/F316L
5 1

9 GASKET 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

1 316L SS + Flexible Graphite 1
6 8 NUT 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
4 ASTM A194 8MA 2
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
7 8 7 STUD 4 ASTM A193 B8MA 2
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
6 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
2 1 3 4
12 5 TRUNNION 1 ASTM A182 F316/F316L
9 4 TRUNNION LIPSEAL 1 ELGILOY +PTFE Primary seal 1
3 BALL 1 ASTM A182 F316/F316L
10 49 50 2 BODY CAP 1 ASTM A182 F316/F316L
1 BODY 1 ASTM A182 F316/F316L BOC-1933
L No. Part Name QTY. Material Note MPG1
A3
Shell Test 30 bar
NTS
Seat Test (Hyd.) 21 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H2 M N H3 P Weight/Kg
QFCL150CSK094 1C22RP 3 8x6 150 RF 457 201 150 227 257 76 288 43 400 240
2
1. Fluid Service: Lean Amine 1
2. Design Pressure:13.2~19.6Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

B16.5 RF
8" Valve:
AMU-153HV-0408 2
AMU-153HV-0410 1.Valves comply with NACE requirement 1
AMU-153HV-0562 2.Valves end flange surface finish shall be 3.2 to 6.3 um
D C G t n-d1 f AMU-153HV-0563 3.Fire testing & certification shall be as per API 6FA / ISO

ØG
ØD
ØC
343 298.4 269.7 26.9 8-22 1.5 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
5.All SS material shall be dual certified

f t
N47

P10c Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

n-d1
External Painting MGP1-GP2-CPC-RA-7754-0005
P19 APPLICABLE STANDARDS: PMI MGP1-GP2-CPC-RA-7739-0008
N93
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
W04 P10b
P07 P08 Inspection & Test:API 598 End Connection: ASME B16.5 RF
N30 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N108 SNAP RING 2 ASTM A240 316/316L
N93 LIFTING LUG 2 ASTM A572 GR50
Seat W05 W03 N92 SUPPORT LEG 2 ASTM A572 GR50
N73 SUPPORT PLATE 2 ASTM A240 316/316L
N47 TOP FLANGE 1 ASTM A105N
Ød

Ød0

N30b BEARING 2 316L+PTFE

C01 N30 BEARING 2 316L+PTFE
N08d NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
N73
N07d STUD 4 ASTM A193 B7M+Hot dip galvanizing 1

P02 N05 GEARBOX 1 DUCTILE IRON

N03 HANDWHEEL 1 ASTM A283 GRD
P01 W47 GRAPHITE RING 1 GRAPHITE
W46 SPACER RING 1 ASTM A240 316/316L
DRAIN
W26a THRUST WASHER 1 RPTFE
Body Seal W05 SPRING 1 INCONEL X-750 1
L W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING 16 INCONEL X-750 1
S09 GRAPHITE RING 2 GRAPHITE
S05 SEAT INSERT 2 PEEK
M N03 N05 N92 N07d N08d
N S04c STEM LIPSEAL 1 PTFE+ELGILOY
S04a STEM PACKING 1 RPTFE Fire safe seal 1
S04 PACKING 1 GRAPHITE
S03e LIPSEAL 1 PTFE+ELGILOY Primary seal 1
P

H3

S03a LIPSEAL 2 PTFE+ELGILOY Primary seal 1

Drain & Vent connection S03 LIPSEAL 2 PTFE+ELGILOY Primary seal 1 issued for approval
VENT 1 S01f GASKET 2 316L SS + Flexible Graphite 1
CONN.
H

S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
S01f
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A105N 003 ISSUED FOR REVIEW
P23 Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A105N
H2

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024

P07d P08d P10c SCREW 5 ASTM A193 B7M+Hot dip galvanizing 1
P10b SCREW 6 ASTM A193 B7M+Hot dip galvanizing 1 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 2HM+Hot dip galvanizing 1
P08 NUT 24 ASTM A194 2HM+Hot dip galvanizing 1
P07d STUD 8 ASTM A193 B7M+Hot dip galvanizing 1
P07 STUD 24 ASTM A193 B7M+Hot dip galvanizing 1
P03 STEM 1 ASTM A182 F316/F316L
Seat(SPE) P02 BONNET 2 ASTM A105N
Stem Seal P01 BODY 1 ASTM A105N BOC-1933
3mm 316L overlay NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 Body Seal 3mm 316L overlay A3
Shell Test 32 bar
S04 N108a S03 S01
NTS

W46
Seat Test (Hyd.) 22 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S04a C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) PACKAGE (AMU-A-50701)
S01c
S04c
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: TM Ball Valve(Forging)
S03e Body BASRA.OIL. COMPANY,IRAQ
N30b W47 N108 S03a S09 W01 C02 S05
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
W26a

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H2 M N H3 P Weight/Kg
QFCL150RLK003 1S42R 0 8x6 150 RF 457 201 150 227 257 76 288 43 500 240
1. Fluid Service: Rich Amine 1
2. Design Pressure:14.3~19Barg
3. Temperature :-29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

B16.5 RF 8" Valve:

AMU-153HV-0176 2
AMU-153HV-0177
AMU-153HV-0179
AMU-153HV-0180 1.Valves comply with NACE requirement 1
AMU-153HV-0182 2.Valves end flange surface finish shall be 3.2 to 6.3 um
D C G t n-d1 f AMU-153HV-0183 3.Fire testing & certification shall be as per API 6FA / ISO

ØG
ØD
ØC
AMU-153HV-0186 10497 / ISO 607
343 298.4 269.7 26.9 8-22 1.5 AMU-153HV-0209 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0210 Stem, self-relieving seats
AMU-153HV-0520 5.All SS material shall be dual certified
AMU-153HV-0521
AMU-153HV-0525
f t AMU-153HV-0526
N47

P10c
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

n-d1
External Painting MGP1-GP2-CPC-RA-7754-0005
P19 APPLICABLE STANDARDS: PMI MGP1-GP2-CPC-RA-7739-0008
N93 Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
W04 P10b
P07 P08 Inspection & Test:API 598 End Connection: ASME B16.5 RF
N30 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N108 SNAP RING 2 ASTM A240 316/316L
N93 LIFTING LUG 2 ASTM A572 GR50
Seat W05 W03 N92 SUPPORT LEG 2 ASTM A572 GR50
N73 SUPPORT PLATE 2 ASTM A240 316/316L
N47 TOP FLANGE 1 ASTM A182 F316/F316L
Ød

Ød0

N30b BEARING 2 316L+PTFE

C01 N30 BEARING 2 316L+PTFE
N08d NUT 4 ASTM A194 8MA 2
N73 N07d STUD 4 ASTM A193 B8MA 2

P02
N05 GEARBOX 1 DUCTILE IRON
N03 HANDWHEEL 1 ASTM A283 GRD
P01 W47 GRAPHITE RING 1 GRAPHITE
W46 SPACER RING 1 ASTM A240 316/316L
DRAIN
W26a THRUST WASHER 1 RPTFE
Body Seal W05 SPRING 1 INCONEL X-750 1
L W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING 16 INCONEL X-750 1
S09 GRAPHITE RING 2 GRAPHITE
S05 SEAT INSERT 2 PEEK
M N03 N05 N92 N07d N08d
N S04c STEM LIPSEAL 1 PTFE+ELGILOY
S04a STEM PACKING 1 RPTFE Fire safe seal 1
S04 PACKING 1 GRAPHITE
S03e LIPSEAL 1 PTFE+ELGILOY Primary seal 1
P

H3

S03a LIPSEAL 2 PTFE+ELGILOY Primary seal 1

Drain & Vent connection S03 LIPSEAL 2 PTFE+ELGILOY Primary seal 1 issued for approval
VENT 1
S01f GASKET 2 316L SS + Flexible Graphite 1
CONN.
S01c GASKET 1 316L SS + Flexible Graphite Fire safe seal
H

1 1
S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
S01f
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A182 F316/F316L 003 ISSUED FOR REVIEW
P23 Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A182 F316/F316L
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
H2

P07d P08d P10c SCREW 5 ASTM A193 B8MA 2

P10b SCREW 6 ASTM A193 B8MA 2 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 8MA 2
P08 NUT 24 ASTM A194 8MA 2
P07d STUD 8 ASTM A193 B8MA 2
P07 STUD 24 ASTM A193 B8MA 2
P03 STEM 1 ASTM A182 F316/F316L
P02 BONNET 2 ASTM A182 F316/F316L
Stem Seal Seat(SPE) P01 BODY 1 ASTM A182 F316/F316L BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 A3
Body Seal Shell Test 30 bar
S04 NTS
N108a S03 S01
Seat Test (Hyd.) 21 bar
W46 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S04a C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) PACKAGE (AMU-A-50701)
S01c
S04c B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
S03e Body BASRA.OIL. COMPANY,IRAQ
N30b
W47 N108 S03a S09 W01 C02 S05 A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
W26a

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 B16.5 RF 1. Fluid Service: Lean Amine 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated
D C G t n-d1 f

ØG
165 127 91.9 25.4 8-19 6.4

ØD
ØC
2" Valve:
AMU-153HV-0304 2
AMU-153HV-0305
AMU-153HV-0306

f 1.Valves comply with NACE requirement 1

t APPLICABLE STANDARDS: 2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
10497 / ISO 607

n-d1
Inspection & Test:API 598 End Connection: ASME B16.5 RF 4.Valves will be bi-directional, Anti-static, Anti-Blowout
L1 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A Stem, self-relieving seats
21 23 50 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1 5.All SS material shall be dual certified
49 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
32 48 FLANGE 1 ASTM A105N
47 GASKET 1 316L SS + Flexible Graphite 1
10 46 COVER FLANGE 1 ASTM A105N 1
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
44 FIRE SAFE SEAL 2 316L SS + Flexible Graphite
39 31 43 SEAT LIPSEAL 2 ELGILOY +PTFE
1
Primary seal 1
External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
38 28 42 SEAT RETAINER 2 ASTM A182 F316/F316L Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
37 27 40 BODY LIPSEAL 1 ELGILOY +PTFE Primary seal 1

36 26 39 RETAINER 1 ASTM A240 316/316L

H
38 STOP PLATE 1 AISI 1045
33 25 37 LOCK PLATE 1 ASTM A240 316L
B

H1
29 30 36 SCREW 1 ASTM A276 420
19 35 SEAT INSERT 2 PEEK
41 34 SPRING 2 ASTM B637 UNS N07750
18 33 COVER 1 ASTM A182 F316/F316L
32 LEVER 1 ASTM A352 LCB
40 16 17 31 STEM 1 ASTM A182 F316/F316L
30 STUD 6 ASTM A193 B7M+Hot dip galvanizing 1
29 NUT 6 ASTM A194 2HM+Hot dip galvanizing 1
28 BOLT 2 ASTM A193 B7M+Zn.Ni.Xylan1070 2
27 GLAND FLANGE 1 ASTM A216 WCB
A 26 GLAND ASTM A276 316/316L
C 1
Ød0
Ød

25 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1

24 PACKING 1 GRAPHITE Fire safe seal 1
VIEW C 23 WASHER 1 ASTM A240 316L
14 22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
21 BOLT 1 ISO 3506 A2-70
20 COVER LIPSEAL 1 ELGILOY +PTFE Primary seal 1
19 THRUST WASHER 1 RPTFE
18 BEARING 1 316L+PTFE
17
issued for approval
ANTI-STATIC BALL 1 INCONEL X-750 1
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
14 NAME PLATE 1 ASTM A240 316L
13 SEAT ASSEMBY 2 45&49
11 BEARING 1 316L+PTFE 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
2 3 1 6 4 5 7 8 11 10 SHAFT SLEEVE 1 ASTM A276 316L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
8 NUT 4 ASTM A194 2HM+Zn.Ni.Xylan1070 2 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
46 7 STUD 4 ASTM A193 B7M+Zn.Ni.Xylan1070 2
47 6 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024

48 5 TRUNNION 1 ASTM A182 F316/F316L 2

49 50 4 TRUNNION LIPSEAL 1 ELGILOY +PTFE Primary seal 1
L 3 BALL 1 ASTM A182 F316/F316L
DETAIL B 2 BODY CAP 1 ASTM A105N
44 DETAIL A 1 BODY 1 ASTM A105N BOC-1933
Locking Device
34 STL.6 thermal spray No. Part Name QTY. Material Note MPG1
Lock(not supplied)
35 24 Open Position Close Position Shell Test 154 bar A3
NTS
22 Seat Test (Hyd.) 113 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
43 20 C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)
13 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
STL.20 thermal spray BASRA.OIL. COMPANY,IRAQ
42 3mm 316L overlay A 01.03.24 Jet Yu Jerry Li Clarence Gao -
3mm 316L overlay MGP1-P4068MS001-B01-0004
Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H1 L1 Weight/Kg Rev. Date DRN CHK APRV Mod.
Unit[mm] QFCL600CSK046 6C22RP 3 2x1-1/2 600 RF 292 49 38 120 230 350 26 NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 B16.5 RF 1. Fluid Service: Amine Drain,Lean Amine 1
2. Design Pressure:69.9~99.3Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated
2" Valve: D C G t n-d1 f
165 127 91.9 25.4 8-19 6.4

ØG
ØD
ØC
AMU-153HV-0081
2
AMU-153HV-0116
AMU-153HV-0119
AMU-153HV-0120
AMU-153HV-0125
AMU-153HV-0126 1.Valves comply with NACE requirement
f 2.Valves end flange surface finish shall be 3.2 to 6.3 um
t APPLICABLE STANDARDS: 3.Fire testing & certification shall be as per API 6FA / ISO
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern 10497 / ISO 607

n-d1
Inspection & Test:API 598 End Connection: ASME B16.5 RF 4.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
L1 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
5.All SS material shall be dual certified
21 23 50 STUD 4 ASTM A193 B8MA 2

49 NUT 4 ASTM A194 8MA 2

32 48 FLANGE 1 ASTM A182 F316/F316L
47 GASKET 1 316L SS + Flexible Graphite 1
10 46 COVER FLANGE 1 ASTM A182 F316/F316L 1
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
44 FIRE SAFE SEAL 2 316L SS + Flexible Graphite
39 31 43 SEAT LIPSEAL 2 ELGILOY +PTFE
1
Primary seal 1
External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
38 28 42 SEAT RETAINER 2 ASTM A182 F316/F316L Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
41 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
37 27 40 BODY LIPSEAL 1 ELGILOY +PTFE Primary seal 1

36 26 39 RETAINER 1 ASTM A240 316/316L

H
38 STOP PLATE 1 ASTM A240 316/316L
33 25 37 LOCK PLATE 1 ASTM A240 316L
B

H1
29 30 36 SCREW 1 ASTM A276 420
19 35 SEAT INSERT 2 PEEK
41 34 SPRING 2 ASTM B637 UNS N07750
18 33 COVER 1 ASTM A182 F316/F316L
32 LEVER 1 ASTM A352 LCB
40 16 17 31 STEM 1 ASTM A182 F316/F316L
30 STUD 6 ASTM A193 B8MA 2

29 NUT 6 ASTM A194 8MA 2

28 BOLT 2 ASTM A193 B8MA 2

27 GLAND FLANGE 1 ASTM A351 CF8M

A 26 GLAND ASTM A276 316/316L
C 1
Ød0
Ød

25 SCREW 4 ASTM A193 B8MA 2

24 PACKING 1 GRAPHITE Fire safe seal 1

VIEW C 23 WASHER 1 ASTM A240 316L
14 22 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
21 BOLT 1 ISO 3506 A2-70
20 COVER LIPSEAL 1 ELGILOY +PTFE Primary seal 1
19 THRUST WASHER 1 RPTFE
18 BEARING 1 316L+PTFE
17
issued for approval
ANTI-STATIC BALL 1 INCONEL X-750 1
16 ANTI-STATIC SPRING 1 INCONEL X-750 1
14 NAME PLATE 1 ASTM A240 316L
13 SEAT ASSEMBY 2 45&49
11 BEARING 1 316L+PTFE 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
2 3 1 6 4 5 7 8 11 10 SHAFT SLEEVE 1 ASTM A276 316L 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
8 NUT 4 ASTM A194 8MA 2 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
46 7 STUD 4 ASTM A193 B8MA 2 001 ISSUED FOR REVIEW
47 6 GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
Jet Yu Jerry Clarence- 14.02.2024

48 5 TRUNNION 1 ASTM A182 F316/F316L

49 50 4 TRUNNION LIPSEAL 1 ELGILOY +PTFE Primary seal 1
L 3 BALL 1 ASTM A182 F316/F316L
DETAIL B 2 BODY CAP 1 ASTM A182 F316/F316L
44 DETAIL A Locking Device 1 BODY 1 ASTM A182 F316/F316L BOC-1933
No. Part Name
34 STL.6 thermal spray Lock(not supplied) QTY. Material Note MPG1

35 24 Open Position Close Position Shell Test 150 bar A3

NTS
22 Seat Test (Hyd.) 110 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
43 20 C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)
13 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
STL.20 thermal spray BASRA.OIL. COMPANY,IRAQ
42 A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H1 L1 Weight/Kg Rev. Date DRN CHK APRV Mod.
Unit[mm] QFCL600RLK005 6S42R 0 2x1-1/2 600 RF 292 49 38 100 230 350 26 NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H L1 Weight/Kg
Unit[mm] QFCL600CSK046 6C22RP 3 3x2 600 RF 356 74 49 200 430 40
B16.5 RF 1. Fluid Service: Lean Amine 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
3" Valve:
2 5. All dimensions are in millimeter otherwise stated
AMU-153HV-0583
D C G t n-d1 f

ØG
ØD
ØC
210 168.1 127 31.8 8-22 6.4

APPLICABLE STANDARDS:
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
1.Valves comply with NACE requirement 1
f t Inspection & Test:API 598 End Connection: ASME B16.5 RF 2.Valves end flange surface finish shall be 3.2 to 6.3 um
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A 3.Fire testing & certification shall be as per API 6FA / ISO
51 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1 10497 / ISO 607

n-d1
50 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
4.Valves will be bi-directional, Anti-static, Anti-Blowout
49
Stem, self-relieving seats
L1 SHAFT SLEEVE 1 ASTM A182 F316/F316L
5.All SS material shall be dual certified
48 RETAINER 1 AISI 1065
49 47 33 30 29 47 WASHER 1 ASTM A240 316/316L
46 SEAT INSERT 2 PEEK
45 SEAT LIPSEAL 2 PTFE+ELGILOY Primary seal 1

44 SEAT RETAINER 2 ASTM A182 F316/F316L Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

48
43 STUD 8 ASTM A193 B7M+Hot dip galvanizing 1
External Painting MGP1-GP2-CPC-RA-7754-0005
49 PMI MGP1-GP2-CPC-RA-7739-0008
42 NUT 8 ASTM A194 2HM+Hot dip galvanizing 1
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
31 41 GASKET 1 SPW316L+GRAPHITE Fire safe seal 1

27 40 BODY LIPSEAL 1 PTFE+ELGILOY Primary seal 1

40
39 COVER 1 ASTM A105N
38
41 38 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
32 Primary seal
36 COVER LIPSEAL 1 PTFE+ELGILOY 1
43 42
35 FIRE SAFE PACKING 2 316L SS + Flexible Graphite 1

H
39 34 WAVE SPRING 2 INCONEL X-750 1
II
33 BOLT 1 ASTM A193 B8 CL2
32 STEM 1 ASTM A182 F316/F316L
31 SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
30 STOP PLATE 1 AISI 1045
29 LEVER 1 ASTM A352 LCB
19
27 TOP FLANGE 1 ASTM A105N
18 26 BEARING 1 316L+PTFE
I 25 SPACER RING 1 ASTM A276 316/316L
Ød0

24 GRAPHITE Fire safe seal

Ød

STEM PACKING 1 1

23 PACKING 1 GRAPHITE
17
22 GASKET 1 SPW316L+GRAPHITE
16 20 COVER LIPSEAL 1 PTFE+ELGILOY Primary seal 1

19 THRUST WASHER 1 RPTFE

18 BEARING 1 316L+PTFE
14
17 ANTI-STATIC BALL 2 INCONEL X-750 1

11
16 ANTI-STATIC SPRING 2 INCONEL X-750 1 issued for approval
14 NAME PLATE 1 ASTM A240 316L
12 COVER FLANGE 1 ASTM A105N
5
11 BEARING 1 316L+PTFE
6 10 FLANGE 1 ASTM A105N
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
3 7 8
9 GASKET 1 SPW316L+GRAPHITE Fire safe seal 1
2 1 4 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
8 NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
9 12 7 STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
6 GASKET 1 SPW316L+GRAPHITE Fire safe seal 1
10 50 51 5 TRUNNION ASTM A182 F316/F316L
1
4 TRUNNION LIPSEAL 1 PTFE+ELGILOY Primary seal 1
L Open Position
3 BALL ASTM A182 F316/F316L
1
26
II
3mm 316L overlay 3mm 316L overlay
I 2 BODY CAP 1 ASTM A105N
34 STL.6 thermal spray 1 BODY 1 ASTM A105N BOC-1933
32
46 No. Part Name QTY. Material NOTE MPG1
23
A3
35 Shell Test 154 bar
25 NTS
Close Position
24 45 Seat Test (Hyd.) 113 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
22
36 C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
20 STL.20 thermal spray
PACKAGE (AMU-A-50701)
18 44 B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM BALL VALVE(FORGING )
19 BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 Weight/Kg
Unit[mm] QFCL600CSK047 6C22RP 3 4x3 600 RF 432 100 74 95
QFCL600CSK047 6C22RP 3 6x4 600 RF 559 150 100 170
1. Fluid Service:Lean Amine 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
B16.5 RF 4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

4" Valve:
AMU-153HV-0494
AMU-153HV-0581
SIZE(IN) CLASS D C G t n-d1 f AMU-153HV-0582

ØG
ØD
ØC
AMU-153HV-0588
4x3 600 273 215.9 157.2 38.1 8-25 6.4
AMU-153HV-0589
6x4 600 356 292.1 215.9 47.8 12-29 6.4
1.Valves comply with NACE requirement 1
6" Valve: 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0057 3.Fire testing & certification shall be as per API 6FA / ISO
2
f AMU-153HV-0058 10497 / ISO 607
t AMU-153HV-0059 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0060 Stem, self-relieving seats
29b AMU-153HV-0094 5.All SS material shall be dual certified

n-d1
17d
AMU-153HV-0098
29c
AMU-153HV-0295
162c AMU-153HV-0296
27e 28f
160a AMU-153HV-0299
AMU-153HV-0300 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
27 28
AMU-153HV-0301 External Painting MGP1-GP2-CPC-RA-7754-0005
AMU-153HV-0302 PMI MGP1-GP2-CPC-RA-7739-0008
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001

Stem Seal
APPLICABLE STANDARDS:
Stem Injection Point Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
Seat Inspection & Test:API 598 End Connection: ASME B16.5 RF
10 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
Ød0
Ød

3mm 316L overlay 502 HANDWHEEL 1 ASTM A283 GRD

155a 501 GEARBOX 1 NODULAR IRON
350 ANTI-STATIC BALL 1 INCONEL X-750 1
156
311 NAME PLATE 1 ASTM A240 316L
155 178 FIRE SAFE SEAL 2 GRAPHITE
160e 171 SEAT INSERT 2 PEEK
162b 167b THRUST WASHER 1 RPTFE
162f 162c BODY SEAL LIPSEAL 2 PTFE+ELGILOY Primary seal 1
162f STEM SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
167b
162e TRUNNION SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
162b SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
153a Primary seal 1
162 SEAT SEAL LIPSEAL 2 PTFE+ELGILOY
Anti-Static Device 160f GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
Stem Close position 160c TRUNNION SEAL GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
2b 1 5 15 162e 160c 27b 28b 153b 160a BODY SEAL GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
Body 160e BODY COVER SEAL GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
70c
17f 156 SPACER RING 1 ASTM A276 316/316L
160f
Ball 155 PACKING 1 GRAPHITE
153a STEM BEARING 2 316L+PTFE
17e 27d 28d 153b TRUNNION BEARING 1 316L+PTFE
Stem 70c ANTI-STATIC SPRING 2 INCONEL X-750 1
Body 70 SEAT SPRING 2 INCONEL X-750 1
L 29c SCREW 4 ASTM A193 B7M+Hot dip galvanizing 1
350 29b SCREW 2 ASTM A193 B7M+Hot dip galvanizing 1
28g NUT 4
8
ASTM A194 2HM+Hot dip galvanizing 1 issued for approval
501 27g 28g 27f 28f Body Seal 28f NUT ASTM A194 2HM+Hot dip galvanizing 1
502 28d NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
3mm 316L overlay 28b NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
Body cap 28 NUT 24(3");32(4") ASTM A194 2HM+Hot dip galvanizing 1
27g STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
Body 27f STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
27d STUD 4 ASTM A193 B7M+Hot dip galvanizing 1
27b STUD 4 ASTM A193 B7M+Hot dip galvanizing 1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Seat 27 STUD 24(3");32(4") ASTM A193 B7M+Hot dip galvanizing 1 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
70 STL.6 thermal spray
12 17f FLANGE 1 ASTM A105N 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
311 171
17e COVER FLANGE 1 ASTM A105N
17d BODY COVER 1 ASTM A105N
178
15 TRUNNION 1 ASTM A182 F316/F316L
12 BRACKET 1 ASTM A572 GR50
162
10 STEM 1 ASTM A182 F316/F316L
8 SEAT 2 ASTM A182 F316/F316L
5 BALL 1 ASTM A182 F316/F316L
2b BODY CAP 2 ASTM A105N
STL.20 thermal spray 1 BODY 1 ASTM A105N BOC-1933
8
NO. PART NAME QTY. MATERIAL NOTE MPG1
A3
Shell Test 154 bar
NTS
Seat Test (Hyd.) 113 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 2 Seat Test (Air) 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1 Type: TM BALL VALVE(FORGING )
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 Weight/Kg
Unit[mm] QFCL600RLK006 6S42R 0 6x4 600 RF 559 150 100 170
1. Fluid Service: Lean Amine 1
2. Design Pressure:69.9~99.3Barg
3. Temperature : -29~215°C
B16.5 RF 4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

D C G t n-d1 f

ØG
ØD
ØC
356 292.1 215.9 47.8 12-29 6.4
1.Valves comply with NACE requirement 1

6" Valve: 2
2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0079 3.Fire testing & certification shall be as per API 6FA / ISO
f 10497 / ISO 607
t 4.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
29b 5.All SS material shall be dual certified

n-d1
17d 29c
162c
27e 28f
160a
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
27 28
External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001

Stem Seal
APPLICABLE STANDARDS:
Stem Injection Point Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
Seat Inspection & Test:API 598 End Connection: ASME B16.5 RF
10 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
Ød0
Ød

502 HANDWHEEL 1 ASTM A283 GRD

155a 501 GEARBOX 1 NODULAR IRON
350 ANTI-STATIC BALL 1 INCONEL X-750 1
156
311 NAME PLATE 1 ASTM A240 316L
155 178 FIRE SAFE SEAL 2 GRAPHITE
160e 171 SEAT INSERT 2 PEEK
162b 167b THRUST WASHER 1 RPTFE
162f 162c BODY SEAL LIPSEAL 2 PTFE+ELGILOY Primary seal 1
162f STEM SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
167b
162e TRUNNION SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
162b SEAL LIPSEAL 1 PTFE+ELGILOY Primary seal 1
153a Primary seal 1
162 SEAT SEAL LIPSEAL 2 PTFE+ELGILOY
Anti-Static Device 160f GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
Stem Close position 160c TRUNNION SEAL GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
2b 1 5 15 162e 160c 27b 28b 153b 160a BODY SEAL GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
Body 160e BODY COVER SEAL GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1
70c
17f 156 SPACER RING 1 ASTM A276 316/316L
160f
Ball 155 PACKING 1 GRAPHITE
153a STEM BEARING 2 316L+PTFE
17e 27d 28d 153b TRUNNION BEARING 1 316L+PTFE
Stem 70c ANTI-STATIC SPRING 2 INCONEL X-750 1
Body 70 SEAT SPRING 2 INCONEL X-750 1
L 29c SCREW 4 ASTM A193 B8MA 2
350 29b SCREW 2 ASTM A193 B8MA 2
28g NUT 4 ASTM A194 8MA 2 issued for approval
501 27g 28g 27f 28f Body Seal 28f NUT 8 ASTM A194 8MA 2
502 28d NUT 4 ASTM A194 8MA 2
28b NUT 4 ASTM A194 8MA 2
Body cap 28 NUT 32 ASTM A194 8MA 2
27g STUD 4 ASTM A193 B8MA 2
Body 27f STUD 4 ASTM A193 B8MA 2
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
27d STUD 4 ASTM A193 B8MA 2
27b STUD 4 ASTM A193 B8MA 2 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Seat 27 STUD 32 ASTM A193 B8MA 2 002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
70 STL.6 thermal spray
12 17f FLANGE 1 ASTM A182 F316/F316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
311 171
17e COVER FLANGE 1 ASTM A182 F316/F316L
17d BODY COVER 1 ASTM A182 F316/F316L
178
15 TRUNNION 1 ASTM A182 F316/F316L
12 BRACKET 1 ASTM A572 GR50
162
10 STEM 1 ASTM A182 F316/F316L
8 SEAT 2 ASTM A182 F316/F316L
5 BALL 1 ASTM A182 F316/F316L
2b BODY CAP 2 ASTM A182 F316/F316L
STL.20 thermal spray 1 BODY 1 ASTM A182 F316/F316L BOC-1933
8
NO. PART NAME QTY. MATERIAL NOTE MPG1
A3
Shell Test 150 bar
NTS
Seat Test (Hyd.) 110 bar
GENERAL ARRANGEMENT DRAWING OF BALL VALVES
C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
2 Seat Test (Air) PACKAGE (AMU-A-50701)
B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM BALL VALVE(FORGING )
BASRA.OIL. COMPANY,IRAQ
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H2 M N H3 P Weight/Kg
QFCL600CSK047 6C22RP 3 8x6 600 RF 660 201 150 235 265 101 300 56 500 350
2 2
1. Fluid Service: Lean Amine 1
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

B16.5 RF

8" Valve:
AMU-153HV-0570 1.Valves comply with NACE requirement 1

AMU-153HV-0571 2.Valves end flange surface finish shall be 3.2 to 6.3 um

D C G t n-d1 f 3.Fire testing & certification shall be as per API 6FA / ISO

ØG
ØD
ØC
AMU-153HV-0572 2
419 349.2 269.7 55.6 12-32 6.4 AMU-153HV-0705 10497 / ISO 607
AMU-153HV-0706 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0707 Stem, self-relieving seats
5.All SS material shall be dual certified

f t
N47

P10c Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

n-d1
External Painting MGP1-GP2-CPC-RA-7754-0005
P19 APPLICABLE STANDARDS: PMI MGP1-GP2-CPC-RA-7739-0008
N93
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
W04 P10b
P07 P08 Inspection & Test:API 598 End Connection: ASME B16.5 RF
N30 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N108 SNAP RING 2 ASTM A240 316/316L
N93 LIFTING LUG 2 ASTM A572 GR50
Seat W05 W03 N92 SUPPORT LEG 2 ASTM A572 GR50
N73 SUPPORT PLATE 2 ASTM A240 316/316L
N47 TOP FLANGE 1 ASTM A105N
Ød

Ød0

N30b BEARING 2 316L+PTFE

C01 N30 BEARING 2 316L+PTFE
N08d NUT 4 ASTM A194 2HM+Hot dip galvanizing 1
N73
N07d STUD 4 ASTM A193 B7M+Hot dip galvanizing 1

P02 N05 GEARBOX 1 DUCTILE IRON

N03 HANDWHEEL 1 ASTM A283 GRD
P01 W47 GRAPHITE RING 1 GRAPHITE
W46 SPACER RING 1 ASTM A240 316/316L
DRAIN
W26a THRUST WASHER 1 RPTFE
Body Seal W05 SPRING 1 INCONEL X-750 1
L W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING 20 INCONEL X-750 1
S09 GRAPHITE RING 2 GRAPHITE
S05 SEAT INSERT 2 PEEK
M N05 N92 N07d N08d
N S04c STEM LIPSEAL 1 PTFE+ELGILOY
S04a STEM PACKING 1 RPTFE Fire safe seal 1
S04 PACKING 1 GRAPHITE
S03e LIPSEAL 1 PTFE+ELGILOY Primary seal 1
P

H3

S03a LIPSEAL 2 PTFE+ELGILOY Primary seal 1

Drain & Vent connection S03 LIPSEAL 2 PTFE+ELGILOY Primary seal 1 issued for approval
VENT 1 S01f GASKET 2 316L SS + Flexible Graphite 1
CONN.
H

S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
S01f
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A105N 003 ISSUED FOR REVIEW
P23 Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A105N
H2

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024

P07d P08d P10c SCREW 5 ASTM A193 B7M+Hot dip galvanizing 1
P10b SCREW 6 ASTM A193 B7M+Hot dip galvanizing 1 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 2HM+Hot dip galvanizing 1
P08 NUT 32 ASTM A194 2HM+Hot dip galvanizing 1
P07d STUD 8 ASTM A193 B7M+Hot dip galvanizing 1
P07 STUD 32 ASTM A193 B7M+Hot dip galvanizing 1
P03 STEM 1 ASTM A182 F316/F316L
Seat(SPE) P02 BONNET 2 ASTM A105N
Stem Seal P01 BODY 1 ASTM A105N BOC-1933
3mm 316L overlay NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 3mm 316L overlay A3
Body Seal Shell Test 154 bar
S04 N108a S03 S01
NTS

W46
Seat Test (Hyd.) 113 bar
STL.20 thermal spray GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S04a 2 Seat Test (Air) PACKAGE (AMU-A-50701)
S01c STL.6 thermal spray
S04c B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
S03e Body BASRA.OIL. COMPANY,IRAQ
N30b W47 N108 S03a S09 W01 C02 S05
A 01.03.24 Jet Yu Jerry Li Clarence Gao -
W26a MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 H H2 M N H3 P Weight/Kg
QFCL600RLK006 6S42R 0 8x6 600 RF 660 201 150 235 265 101 300 56 500 350
2 2
1. Fluid Service: Lean Amine 1
2. Design Pressure:69.9~99.3Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

B16.5 RF
Valve:
AMU-153HV-0069
AMU-153HV-0072
AMU-153HV-0073 1.Valves comply with NACE requirement 1

AMU-153HV-0074 2
2.Valves end flange surface finish shall be 3.2 to 6.3 um
D C G t n-d1 f 3.Fire testing & certification shall be as per API 6FA / ISO

ØG
ØD
ØC
AMU-153HV-0075
419 349.2 269.7 55.6 12-32 6.4 AMU-153HV-0076 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
5.All SS material shall be dual certified

f t
N47

P10c Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

n-d1
External Painting MGP1-GP2-CPC-RA-7754-0005
P19 APPLICABLE STANDARDS: PMI MGP1-GP2-CPC-RA-7739-0008
N93
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
W04 P10b
P07 P08 Inspection & Test:API 598 End Connection: ASME B16.5 RF
N30 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
N108 SNAP RING 2 ASTM A240 316/316L
N93 LIFTING LUG 2 ASTM A572 GR50
Seat W05 W03 N92 SUPPORT LEG 2 ASTM A572 GR50
N73 SUPPORT PLATE 2 ASTM A240 316/316L
N47 TOP FLANGE 1 ASTM A182 F316/F316L
Ød

Ød0

N30b BEARING 2 316L+PTFE

C01 N30 BEARING 2 316L+PTFE
N08d NUT 4 ASTM A194 8MA 2
N73
N07d STUD 4 ASTM A193 B8MA 2

P02 N05 GEARBOX 1 DUCTILE IRON

N03 HANDWHEEL 1 ASTM A283 GRD
P01 W47 GRAPHITE RING 1 GRAPHITE
W46 SPACER RING 1 ASTM A240 316/316L
DRAIN
W26a THRUST WASHER 1 RPTFE
Body Seal W05 SPRING 1 INCONEL X-750 1
L W04 STEEL BALL 1 INCONEL X-750 1
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750 1
W01 SPRING 20 INCONEL X-750 1
S09 GRAPHITE RING 2 GRAPHITE
S05 SEAT INSERT 2 PEEK
M N05 N92 N07d N08d
N S04c STEM LIPSEAL 1 PTFE+ELGILOY
S04a STEM PACKING 1 RPTFE Fire safe seal 1
S04 PACKING 1 GRAPHITE
S03e LIPSEAL 1 PTFE+ELGILOY Primary seal 1
P

H3

S03a LIPSEAL 2 PTFE+ELGILOY Primary seal 1

Drain & Vent connection S03 LIPSEAL 2 PTFE+ELGILOY Primary seal 1 issued for approval
VENT 1 S01f GASKET 2 316L SS + Flexible Graphite 1
CONN.
H

S01c GASKET 1 316L SS + Flexible Graphite 1 Fire safe seal 1

S01 GASKET 2 316L SS + Flexible Graphite 1 Fire safe seal 1
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
S01f
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A182 F316/F316L 003 ISSUED FOR REVIEW
P23 Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A182 F316/F316L
H2

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024

P07d P08d P10c SCREW 5 ASTM A193 B8MA 2
P10b SCREW 6 ASTM A193 B8MA 2 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 8MA 2
P08 NUT 32 ASTM A194 8MA 2
P07d STUD 8 ASTM A193 B8MA 2
P07 STUD 32 ASTM A193 B8MA 2
P03 STEM 1 ASTM A182 F316/F316L
P02 BONNET 2 ASTM A182 F316/F316L
Seat(SPE) BOC-1933
Stem Seal P01 BODY 1 ASTM A182 F316/F316L
NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 Body Seal A3
Shell Test 150 bar
S04 N108a S03 S01
NTS

W46
Seat Test (Hyd.) 110 bar
STL.20 thermal spray GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap C 29.04.24 Jet Yu Jerry Li Clarence Gao 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S04a 2 Seat Test (Air) PACKAGE (AMU-A-50701)
S01c STL.6 thermal spray
S04c B 29.03.24 Jet Yu Jerry Li Clarence Gao 1
Type: TM Ball Valve(Forging)
S03e Body BASRA.OIL. COMPANY,IRAQ
N30b W47 N108 S03a S09 W01 C02 S05

W26a
A 01.03.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_004
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150CS212 1C24 3 3x2 150 RF 203 49 74 190 152.4 127 17.5 4-Ø19 160 241.5 300 24.5
1. Fluid Service: Nitrogen / Lean Amine Vapors
2. Design Pressure:12.1~19.6Barg
3" Valve: 3. Temperature : -29~250°C
AMU-153HV-0316 4. Fire Test API 6FA / ISO 10497 / API 607
AMU-153HV-0317 5. All dimensions are in millimeter otherwise stated

1.Valves end flange surface finish shall be 3.2 to 6.3 um

2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
L1 3.Valves will be bi-directional, Anti-static, Anti-Blowout
27 5 12 21 Stem, self-relieving seats
4.All SS material shall be dual certified
33
34

22 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
7 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
4 30 I
24

H
Welding 8
III 29
31 01 10
10 APPLICABLE STANDARDS:
23 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
02 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
34 ADAPTER 1 AISI 1045
33 YOKE 1 ASTM A572 GR50
II I
Ød0

32 SCREW
ØG

Ød
ØD
ØC

4 A2-70
Ⅳ 31 GASKET 1 GRAPHITE
II 30 PACKING 1 GRAPHITE Primary seal
20
29 PACKING RING 1 ASTM A276 316/316L
16 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 2H+Hot dip galvanizing
25 STUD 2 ASTM A193 B7+Hot dip galvanizing
n-Ød1

1.5 t 3 1 6 17 18 2 24 BEARING 1 PEEK

L III 23 THRUST PLATE 1 PEEK
Open position 24 22 RETAINER 1 AISI 1566
32 21 BOLT 1 ISO 3506 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750
19 STOP SCREW 2 ASTM A276 420
18 NUT 6 ASTM A194 2H+Hot dip galvanizing
29 17 STUD 6 ASTM A193 B7+Hot dip galvanizing
issued for approval
16 ANTI-STATIC BALL 2 INCONEL X-750
19 26 25 31
15 STOP PLATE 1 ASTM A240 45+Ni
Close position
23 14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 10 GASKET 1 316L SS + Flexible Graphite Primary seal 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F6a
06 SEAT INSERT 2 PEEK
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A216 WCB
03 BALL 1 ASTM A105N/ENP
02 BODY CAP 1 ASTM A105N BOC-1933
01 BODY 1 ASTM A105N MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 32 bar NTS

Seat Test (Hyd.) 22 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ

A 03.06.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL150LCK024 1C42R 3 3 150 RF 203 74 190 152.4 127 17.5 4-Ø19 165 272 420 43
QFCL150LCK024 1C42R 3 4 150 RF 229 100 229 190.5157.2 22.4 8-Ø19 ≥150 336 400 72
1. Fluid Service: Vent Gas
2. Design Pressure:13.2~19.6Barg
3. Temperature : -46~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

3" Valve:
AMU-153HV-0012

4" Valve:
AMU-153HV-0606 1.Valves comply with NACE requirement
2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
L1 4.Valves will be bi-directional, Anti-static, Anti-Blowout
27 5 12 21 Stem, self-relieving seats
5.All SS material shall be dual certified
33
34

22 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
15
H1
7 Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
4 30 I
24

H
Welding 8
III 29
28 01 10
10 APPLICABLE STANDARDS:
23 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
02 Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
34 ADAPTER 1 AISI 1045
33 YOKE 1 ASTM A572 GR50
II I
32 SCREW
ØG

Ød
ØD
ØC

4 A2-70
Ⅳ 31 GASKET 1 GRAPHITE
II 30 PACKING 1 GRAPHITE Primary seal
20
29 PACKING RING 1 ASTM A276 316/316L
16 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 7ML+Hot dip galvanizing
25 STUD 2 ASTM A320 L7M+Hot dip galvanizing
n-Ød1

1.5 t 3 1 6 17 18 2 24 BEARING 1 PEEK

L III 23 THRUST PLATE 1 PEEK
Open position 24 22 RETAINER 1 AISI 1566
32 21 BOLT 1 ISO 3506 A2-70
30 20 ANTI-STATIC SPRING 2 INCONEL X-750
19 STOP SCREW 2 ASTM A1082 UNS S31803
18 NUT 8 ASTM A194 7ML+Hot dip galvanizing
29 17 STUD 8 ASTM A320 L7M+Hot dip galvanizing issued for approval
16 ANTI-STATIC BALL 2 INCONEL X-750
19 26 25 31
15 STOP PLATE 1 ASTM A240 45+Ni
Close position
23 14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

Ⅳ 10 GASKET 1 316L SS + Flexible Graphite Primary seal 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT RING 2 PEEK
14 05 LEVER 1 ASTM A352 LCB
19 04 GLAND FLANGE 1 ASTM A352 LCC
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A350 LF2 CL1 BOC-1933
01 BODY 1 ASTM A350 LF2 CL1 MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 32 bar NTS

Seat Test (Hyd.) 22 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ

A 03.06.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H1 H L1 Weight/Kg
QFCL300RLK005 3S42R 0 2x1-1/2 300 RF 216 38 49 165 127 91.9 20.6 8-Ø19 100 225.5 300 21.2
1. Fluid Service: Purge Gas
2. Design Pressure:14.3~19Barg
3. Temperature : -29~160°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

3" Valve:
AMU-153HV-0353

1.Valves end flange surface finish shall be 3.2 to 6.3 um

2.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
L1 3.Valves will be bi-directional, Anti-static, Anti-Blowout
Stem, self-relieving seats
27 5 12 21 4.All SS material shall be dual certified

33
I
34
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
22 01 10 External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
15 H1
7
4 02
24 30

H
Welding 8
III 29 APPLICABLE STANDARDS:
28 Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
10 Inspection & Test:API 598 End Connection: ASME B16.5 RF
23 II Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
20 34 ADAPTER 1 AISI 1045
16 33 YOKE 1 ASTM A572 GR50
32 SCREW 4 A2-70
31 GASKET 1 GRAPHITE
II I
Ød0
ØG
ØD
ØC

30 PACKING
Ød

1 GRAPHITE Primary seal

Ⅳ III 29 PACKING RING 1 ASTM A276 316/316L
24 27 LOCK PLATE 1 ASTM A240 316/316L
26 NUT 2 ASTM A194 8MA
30
25 STUD 2 ASTM A193 B8MA
24 BEARING 1 PEEK
23 THRUST PLATE 1 PEEK
29
22 RETAINER 1 ASTM A240 316
n-Ød1

1.5 t 3 1 6 17 18 2 31 21 BOLT ISO 3506 A2-70

1
L 20 ANTI-STATIC SPRING 2 INCONEL X-750
23 19 STOP SCREW ASTM A1082 UNS S31803
Open position 2
18 NUT 4 ASTM A194 8MA
17 STUD 4 ASTM A193 B8MA
issued for approval
32 16 ANTI-STATIC BALL 2 INCONEL X-750
15 STOP PLATE 1 ASTM A240 316
14 NAME PLATE 1 ASTM A240 316L
12 WASHER 1 ASTM A240 316/316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
19 26 25 1
10 GASKET 316L SS + Flexible Graphite Primary seal 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
Close position 08 GLAND 1 ASTM A276 316/316L
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
07 STEM 1 ASTM A182 F316/F316L
06 SEAT INSERT 2 PEEK
05 LEVER 1 ASTM A352 LCB
04 GLAND FLANGE 1 ASTM A351 CF8M
03 BALL 1 ASTM A182 F316/F316L
02 BODY CAP 1 ASTM A182 F316/F316L BOC-1933
19 Ⅳ 01 BODY 1 ASTM A182 F316/F316L MPG1
NO. PART NAME QTY. MATERIAL Note A3
Shell Test 76 bar NTS
14
Seat Test (Hyd.) 55 bar GENERAL ARRANGEMENT DRAWING OF BALL VALVES
FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Seat Test (Air) 6 bar PACKAGE (AMU-A-50701)

Type: Floating Ball Valve(Forging) BASRA.OIL. COMPANY,IRAQ

A 03.06.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-d1 H1 H L1 Weight/Kg
QFCL600LCK004 6C42R 3 1x3/4 600 RF 216 25 19 124 88.9 50.8 17.5 4-Ø19 100.5 201 250 12
1. Fluid Service: Sour Gas,Sweet Gas
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1" Valve:
AMU-153HV-0002
AMU-153HV-0101

1.Valves comply with NACE requirement

2.Valves end flange surface finish shall be 3.2 to 6.3 um
3.Fire testing & certification shall be as per API 6FA / ISO
10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
>=1" L1 Stem, self-relieving seats
N09a N24b 5.All SS material shall be dual certified
N01

＜1"
N02
N08 N35
Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
N98 External Painting MGP1-GP2-CPC-RA-7754-0005
PMI MGP1-GP2-CPC-RA-7739-0008
N27
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
N94
N06a Stem Seal
H1

N96
WELDING
P10b APPLICABLE STANDARDS:
Design:API 608/ISO 17292 Face to Face Dimension: ASME B16.10 Long Pattern
P19
Inspection & Test:API 598 End Connection: ASME B16.5 RF

H
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
W05 W04
N98 LOCKING PLATE 1 ASTM A240 316/316L
N96 STOP PIN 1 ASTM A276 420
N94 STOP PLATE 1 AISI 1045
N35 YOKE 1 ASTM A572 GR50
Anti-Static Device N27 ADAPTER 1 AISI 1045
Ød0

ØG

ØD
ØC
Ød

Body Seal N24b WASHER 1 ASTM A240 316/316L

N09a BOLT 1 ISO 3506 A4-70
N08 NUT 1 ISO 3506 A4-70
N06a RETAINER 1 AISI 1065
N02 LEVER SLEEVE 1 PVC
n-d1

N01 LEVER 1 ASTM A352 LCB

W26a THRUST WASHER 1 PEEK
t 6.4 W05 SPRING 2 INCONEL X-750
C01 P01 S05 P08 P07 P02
STL.20 thermal spray W04 STEEL BALL 2 INCONEL X-750
L S05 SEAT INSERT 2 PEEK
S04 PACKING 1 GRAPHITE Primary seal issued for approval
P10a
S01c GASKET 1 316L SS + Flexible Graphite Primary seal
S01 GASKET 1 316L SS + Flexible Graphite Primary seal
C01 BALL 1 ASTM A182 F316/F316L+STL.20
Locking Device
P19 COVER 1 ASTM A350 LF2 CL1
004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
Lock(not supplied) P10b SCREW 4 ASTM A320 L7M+Hot dip galvanizing
003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
Open Position Close Position P10a SCREW 2 ASTM A320 L7M+Hot dip galvanizing
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
O P08 NUT 6 ASTM A194 7ML+Hot dip galvanizing 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
S P07 STUD 6 ASTM A320 L7M+Hot dip galvanizing
P06 GLAND 1 ASTM A276 316/316L
P05 GLAND FLANGE 1 ASTM A352 LCC
P03 STEM 1 ASTM A182 F316/F316L
P02 BODY CAP 1 ASTM A350 LF2 CL1
P01 BODY 1 ASTM A350 LF2 CL1 BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
Stem Seal
Anti-Static Device Body A3
P03 Shell Test 154 bar
NTS
P05 Body Seal
Ball Seat Test (Hyd.) 113 bar
P06 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
Body cap FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
Seat Test (Air) 6 bar
S04 Cover Stem Anti-staic Ball PACKAGE (AMU-A-50701)
S01 Spring
S01c Body Type: Floating Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a A 03.06.24 Jet Yu Jerry Li Clarence Gao -
MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d D C G t n-Ød1 H H2 M N H3 P Weight/Kg
QFCL150LCK027 1C42R 3 10 150 RF 533 252 406 362 323.8 28.412-Ø25 310.5 331 56 315 112 500 410
QFCL150LCK027 1C42R 3 6 150 RF 394 150 279 241.3 215.9 23.9 8-Ø22 227 257 57 196 31 400 155
1. Fluid Service: Vent Gas
2. Design Pressure:13.2~19.6Barg
3. Temperature : -46~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated

1.Valves comply with NACE requirement

6" Valve: 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0050 3.Fire testing & certification shall be as per API 6FA / ISO
AMU-153HV-0242 10497 / ISO 607
4.Valves will be bi-directional, Anti-static, Anti-Blowout
10" Valve: Stem, self-relieving seats
N47 AMU-153HV-0135 5.All SS material shall be dual certified
AMU-153HV-0137
P10c

P19

P10b
W04
Q N93 Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
External Painting MGP1-GP2-CPC-RA-7754-0005
P07 P08
PMI MGP1-GP2-CPC-RA-7739-0008
Stem Seal
W30 APPLICABLE STANDARDS: Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001

W26
Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern
Inspection & Test:API 598 End Connection: ASME B16.5 RF
Seat Seat
Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
W05 W03
N93 LIFTING LUG 2 ASTM A572 GR50
P
N92 SUPPORT LEG 2 ASTM A572 GR50
ØG
ØD
ØC

Ød

N47 TOP FLANGE 1 ASTM A350 LF2 CL1

C01 N08d NUT ASTM A194 7ML+Hot dip galvanizing QTY.:4(6");8(10")
N07d STUD ASTM A320 L7M+Hot dip galvanizing QTY.:4(6");8(10")
W73
N05 GEARBOX 1 DUCTILE IRON
P02 N03 HANDWHEEL 1 ASTM A283 GRD
W73 SUPPORT PLATE 1 ASTM A572 GR50
P01 W30a BEARING 1 316L+PTFE
W30 BEARING 2 316L+PTFE
W26a THRUST WASHER 1 RPTFE
DRAIN Body Seal
W26 THRUST WASHER 2 RPTFE
n-Ød1

1.5 t CONN. W05 SPRING 2 INCONEL X-750

W04 STEEL BALL 1 INCONEL X-750
L W03 ANTI-STATIC PLUNGER 1 INCONEL X-750
W01 SPRING INCONEL X-750 QTY.:16(6");24(10")
S05 SEAT INSERT 2 PEEK
S04 PACKING 1 GRAPHITE Fire safe seal
Locking Device
M N S02h O-RING 1 FKM LT
N05 N92 N07d N08d Lock(not supplied)
S02g O-RING 1 FKM LT
S02e O-RING 1 FKM LT Primary seal
S02c O-RING 2 FKM LT Primary seal
P

Primary seal
H3

S02a O-RING 2 FKM LT

S02 O-RING 2 FKM LT Primary seal
VENT
S01f GASKET 2 316L SS + Flexible Graphite issued for approval
CONN. S01c GASKET 1 316L SS + Flexible Graphite Fire safe seal
H

Seat(SPE) S01a GASKET 2 316L SS + Flexible Graphite Fire safe seal

C.S. Handwheel S01 GASKET 2 316L SS + Flexible Graphite Fire safe seal
N03
C02 SEAT RETAINER 1 ASTM A182 F316/F316L
C01 BALL 1 ASTM A182 F316/F316L 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A350 LF2 CL1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
P19 COVER 1 ASTM A350 LF2 CL1
H2

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024

P10c SCREW ASTM A320 L7M+Hot dip galvanizing QTY.:5(6");6(10")
OPEN P10b SCREW ASTM A320 L7M+Hot dip galvanizing QTY.:6(6");8(10") 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 7ML+Hot dip galvanizing
P08 NUT ASTM A194 7ML+Hot dip galvanizing QTY.:12(6");20(10")
P07d STUD 8 ASTM A320 L7M+Hot dip galvanizing
S02h C02 S02a W01 S01a S05 P07 STUD ASTM A320 L7M+Hot dip galvanizing QTY.:12(6");20(10")
Stem Seal P03 STEM 1 ASTM A182 F316/F316L
S02g Drain & Vent connection P02 BODY CAP 1 ASTM A350 LF2 CL1
Stem Injection Point(Q) P01 BODY 1 ASTM A350 LF2 CL1 BOC-1933
P03 NO. PART NAME QTY. MATERIAL NOTE MPG1
A3
S04 Shell Test 32 bar
S01f NTS
S02c Body Seal
Seat Test (Hyd.) 22 bar
P23 GENERAL ARRANGEMENT DRAWING OF BALL VALVES
S01c Body cap 6 bar FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
S02 Seat Test (Air) PACKAGE (AMU-A-50701)
S02e P07d P08d
S01
W26a Body Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
Planform W30a A 03.06.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Unit[mm] Datasheet No. Piping class C.A SIZE(IN) CLASS END L d d0 D C G t n-Ød1 H H2 M N H3 P Weight/Kg
QFCL600LCK006 6C42R 3 14x10 600 RF 889 334 252 603 527 412.8 69.820-Ø38 325 353 126 371 60 600 900
1. Fluid Service: Sour Gas,Sweet Gas
2. Design Pressure:86.4~102.1Barg
3. Temperature : -29~215°C
4. Fire Test API 6FA / ISO 10497 / API 607
5. All dimensions are in millimeter otherwise stated
T h is is Cla s s 600 v a lv e ,
n o t m e n tio n e d a n y w h e re .

Ex is tin g v a lv e s a t SG T F
1.Valves comply with NACE requirement
14" Valve: b a tte ry lim it to b e re u s e d . 2.Valves end flange surface finish shall be 3.2 to 6.3 um
AMU-153HV-0001
3.Fire testing & certification shall be as per API 6FA / ISO
N47 AMU-153HV-0003
10497 / ISO 607
AMU-153HV-0100
P10c 4.Valves will be bi-directional, Anti-static, Anti-Blowout
AMU-153HV-0102
Stem, self-relieving seats
W h a t a re P19
5.All SS material shall be dual certified
P10b
W04
Q N93

P07 P08
Stem Seal
W30 APPLICABLE STANDARDS: Material Test Certificate MGP1-GP2-CPC-MP-7880-0004
W26 Design:API 6D/ISO 14313 Face to Face Dimension: ASME B16.10 Long Pattern External Painting MGP1-GP2-CPC-RA-7754-0005
Locking Device PMI MGP1-GP2-CPC-RA-7739-0008
Inspection & Test:API 598 End Connection: ASME B16.5 RF Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
Lock(not supplied)
Seat
W05 W03
Seat Fugitive Emission Class:ISO 15848-1 Class B Closure Test Leakage Rate:ISO 5208 Rate A
P N93 LIFTING LUG 2 ASTM A572 GR50
N92 SUPPORT LEG 2 ASTM A572 GR50
Ød0
ØG
ØD
ØC

Ød

N47 TOP FLANGE 1 ASTM A350 LF2 CL1

C01
N35 YOKE 1 ASTM A572 GR50
W73 N08d NUT 4(8"),8(10") ASTM A194 7ML+Hot dip galvanizing
N08b NUT 8(8"),16(10") ASTM A194 7ML+Hot dip galvanizing
P02
C.S. Handwheel
N07d STUD 4(8"),8(10") ASTM A320 L7M+Hot dip galvanizing
N07b STUD 4(8"),8(10") ASTM A320 L7M+Hot dip galvanizing
P01 N03 N05 GEARBOX 1 DUCTILE IRON
N03 HANDWHEEL 1 ASTM A283 GRD
W73 SUPPORT PLATE 2 ASTM A572 GR50
DRAIN Body Seal W30a BEARING 1 316L+PTFE
n-Ød1

1.5 t CONN.
W30 BEARING 2 316L+PTFE
OPEN
W26a THRUST WASHER 2 RPTFE
L W26 THRUST WASHER 2 RPTFE
s h a ll b e p lu g g e d W05 SPRING 1 INCONEL X-750
W04 STEEL BALL 1 INCONEL X-750
W03 ANTI-STATIC PLUNGER 1 INCONEL X-750
M N05 N35 N92 N W01 SPRING 28(8"),32(10") INCONEL X-750
S05 SEAT 2 PEEK
S04 PACKING 1 GRAPHITE Fire safe seal
N07d N08d
S02h O-RING 2 FKM LT AED
P

H3

S02g O-RING 1 FKM LT AED

S02e O-RING 1 FKM LT AED Primary seal
S02c O-RING 2 FKM LT AED Primary seal
N07b N08b
S02a O-RING 2 FKM LT AED Primary seal
S02 O-RING 2 FKM LT AED Primary seal
S01f GASKET 1 316L SS + Flexible Graphite issued for approval
Q VENT
CONN. S01c GASKET 1 316L SS + Flexible Graphite Fire safe seal
H

Seat(SPE) Fire safe seal

S01a GASKET 2 316L SS + Flexible Graphite
N P N STL.6 thermal spray
S01 GASKET 2 316L SS + Flexible Graphite Fire safe seal
C02 SEAT RETAINER 2 ASTM A182 F316/F316L
C01 BALL 1 ASTM A182 F51 004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024
P23 FLANGE 2 ASTM A350 LF2 CL1 003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
H2

P19 COVER 1 ASTM A350 LF2 CL1

002 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 07.04.2024
P10c SCREW 5(8"),6(10") ASTM A320 L7M+Hot dip galvanizing
P10b SCREW 6(8"),8(10") ASTM A320 L7M+Hot dip galvanizing 001 ISSUED FOR REVIEW Jet Yu Jerry Clarence- 14.02.2024
P08d NUT 8 ASTM A194 7ML+Hot dip galvanizing
STL.20 thermal spray P08 NUT 36 ASTM A194 7ML+Hot dip galvanizing
P07d STUD 8 ASTM A320 L7M+Hot dip galvanizing
W h e re is d ra in a n d p lu g ? W h a t is th e p u rp o s e o f th e s e s u p p o rts ? S02h C02 S02a W01 S01a S05 P07 STUD 36 ASTM A320 L7M+Hot dip galvanizing
P03 STEM 1 ASTM A182 F316/F316L
Stem Seal
Co n firm if b o lte d w ith p ip e fla n g e s , P02 BODY CAP 2 ASTM A350 LF2 CL1
S02g s tre s s e s w ill b e u n d e r lim it. T H e re is n o
Stem Injection Point(Q)
P01 BODY 1 ASTM A350 LF2 CL1 BOC-1933
NO. PART NAME QTY. MATERIAL NOTE MPG1
P03 s u p p o rt c o n s id e re d b e lo w th e v a lv e a s p e r A3
Drain & Vent connection Shell Test 154 bar
S04 NTS
Body Seal
S02c
Seat Test (Hyd.) 113 bar
Body cap
Seat Test (Air) 6 bar
Ma in ta in c o nGENERAL
s isAMINE
FOR teARRANGEMENT
n PACKAGE
c y w ith DRAWING OF BALL VALVES
(AMU-A-15301) AND HOT OIL
S02
cover page
S01c S01f PACKAGE (AMU-A-50701)
S02e S01
Body P23 Type: TM Ball Valve(Forging)
BASRA.OIL. COMPANY,IRAQ
W26a
Planform P07d P08d A 03.06.24 Jet Yu Jerry Li Clarence Gao - MGP1-P4068MS001-B01-0004
W30a

Rev. Date DRN CHK APRV Mod. NEWAY VALVE (SUZHOU) CO.,LTD. MGP1-P4068MS001-B01-0004_002
 Name Plate for Forged Floating Ball Valve Name Plate for Forged Trunnion Mounted Ball Valve
1.All dimensions are in mm otherwise stated

2.The thickess of name plate is 0.5mm

3.TheMaterial of name plate is SS316

Pressure at R.T. Pressure at Max.T.

Material Test Certificate MGP1-GP2-CPC-MP-7880-0004

External Painting MGP1-GP2-CPC-RA-7754-0005
ISO 17292/ASME B16.34 API 6D PMI MGP1-GP2-CPC-RA-7739-0008
Shipping Marks and Packing MGP1-GP2-CPC-SA-7739-0001
SIZE CLASS BODY SIZE CLASS BODY
STEM BALL SEAT SEAT BALL SEALS
MOP psi @ F/ psi @ F STEM F-F DATE
S.N. MOP psi @ F/ psi @ F
NACE S.N.
If any QSL-
MADE IN CHINA
MADE IN CHINA
Ch a n g e u n its to b a r a n d
D eg C Date
V a lv e d a ta s h e e t n u m b e r
U s e units a s p ro v ided in En s u re a ll d e ta ils a s p e r Se c tio n 13 .2 o f
G AD , i.e ba rs , D eg C s p e c ific a tio n fo r m a n u a l v a lv e s ,
MG P 1-G P 2 -CP C-MP -78 8 0-0004 a re m a rk e d o n
n a m e p la te .

Tag plate Sample:

T h e d im e n s io n s o f th e
Id e n tific a tio n L a b e l s h a ll b e issued for approval

004 ISSUED FOR REVIEW Jet Yu Jerry Clarence 08.06.2024

003 ISSUED FOR REVIEW Jet Yu Jerry Clarence 22.05.2024
002 ISSUED FOR REVIEW Jet Yu Jerry Clarence-
Clarence- 07.04.2024
001 ISSUED FOR REVIEW Jet Yu Jerry Clarence-
Clarence- 14.02.2024

BOC-1933
MPG1
A3
NTS

GENERAL ARRANGEMENT DRAWING OF BALL VALVES

FOR AMINE PACKAGE (AMU-A-15301) AND HOT OIL
PACKAGE (AMU-A-50701)

BASRA.OIL. COMPANY,IRAQ

MGP1-P4068MS001-B01-0004

MGP1-P4068MS001-B01-0004_004
MGP1-P4068MS001-B01-0004_003