[DESIGN PRECAUTIONS] [TEST OPERATION PRECAUTIONS] [DISPOSAL PRECAUTIONS]

WARNING WARNING CAUTION

GS21 General Description  To maintain the security (confidentiality, integrity, and availability) of the GOT
and the system against unauthorized access, DoS*1 attacks, computer
 Before performing the test operations of the user creation monitor screen
(such as turning ON or OFF bit device, changing the word device current
 When disposing of this product, treat it as industrial waste.

viruses, and other cyberattacks from unreliable networks and devices via value, changing the settings or current values of the timer or counter, and
network, take appropriate measures such as firewalls, virtual private changing the buffer memory current value), read through the manual [TRANSPORTATION PRECAUTIONS]
GS2110-WTBD-N GS2107-WTBD-N networks (VPNs), and antivirus solutions. carefully and make yourself familiar with the operation method. During test
Mitsubishi Electric shall have no responsibility or liability for any problems operation, never change the data of the devices which are used to perform
significant operation for the system. False output or malfunction can cause an
CAUTION
involving GOT trouble and system trouble by unauthorized access, DoS
attacks, computer viruses, and other cyberattacks. accident.
Thank you for purchasing the GOT SIMPLE Series. *1 DoS: A denial-of-service (DoS) attack disrupts services by overloading  Make sure to transport the GOT main unit and/or relevant unit(s) in the
systems or exploiting vulnerabilities, resulting in a denial-of-service (DoS) manner they will not be exposed to the impact exceeding the impact
Prior to use, please read both this manual and the state. [STARTUP/MAINTENANCE PRECAUTIONS] resistance described in the general specifications of this manual, as they are
detailed manual thoroughly to fully understand the precision devices. Failure to do so may cause the unit to fail. Check if the unit
operates correctly after transportation.
product.
CAUTION WARNING
 When fumigants that contain halogen materials such as fluorine, chlorine,
 When power is on, do not touch the terminals. Doing so can cause an electric bromine, and iodine are used for disinfecting and protecting wooden
MODEL GS21-N-U-GD-CE  Do not bundle the control and communication cables with main-circuit, power shock or malfunction. packaging from insects, they cause malfunction when entering our products.
or other wiring. Run the above cables separately from such wiring and keep Please take necessary precautions to ensure that remaining materials from
them a minimum of 100mm apart. Not doing so noise can cause a  Before starting cleaning or terminal screw retightening, always switch off the
Model power externally in all phases. Not doing so can cause the unit to fail or fumigant do not enter our products, or treat packaging with methods other
1D7MW4 malfunction.
malfunction. Undertightening can cause a short circuit or malfunction.
code  Do not press the GOT display section with a pointed material as a pen or than fumigation (heat method). Additionally, disinfect and protect wood from
Overtightening can cause a short circuit or malfunction due to the damage of insects before packing products.
driver. Doing so can result in a damage or failure of the display section. the screws or unit.
IB(NA)-0800654CHN-C(2212)MEAMC  When the GOT is connected to the Ethernet network, the available IP
address is restricted according to the system configuration. Associated Manuals
© 2020 MITSUBISHI ELECTRIC CORPORATION • When multiple GOTs are connected to the Ethernet network: Do not set the The following manuals are relevant to this product. When these loose manuals are
IP address (192.168.3.18) for the GOTs and the controllers in the network. CAUTION required, please consult with our local distributor.
• When a single GOT is connected to the Ethernet network: Do not set the IP
address (192.168.3.18) for the controllers except the GOT in the network.  Do not disassemble or modify the unit. Doing so can cause a failure, Manual Number
SAFETY PRECAUTIONS Doing so can cause the IP address duplication. The duplication can malfunction, injury or fire.
Manual name Contents
(Model Code)
negatively affect the communication of the device with the IP address
(Always read these precautions before using this equipment.) (192.168.3.18). The operation at the IP address duplication depends on the  Do not touch the conductive and electronic parts of the unit directly. Doing so
devices and the system. can cause a unit malfunction or failure. GT Works3 Installation
Installation Instructions BCN-P5999-0066
Before using this product, please read this manual and the relevant  Turn on the controllers and the network devices to be ready for  The cables connected to the unit must be run in ducts or clamped. Not doing
Instructions
manuals introduced in this manual carefully and pay full attention to communication before they communicate with the GOT. Failure to do so can so can cause the unit or cable to be damaged due to the dangling, motion or
cause a communication error on the GOT. Describes the GOT SIMPLE series
safety to handle the product correctly. accidental pulling of the cables or can cause a malfunction due to a cable hardware-relevant content such as
 When the GOT is subject to shock or vibration, or some colors appear on the
The precautions given in this manual are concerned with this screen of the GOT, the screen of the GOT might flicker. connection fault. GOT SIMPLE Series part names, external dimensions,
JY997D52901
product.  When unplugging the cable connected to the unit, do not hold and pull from User's Manual*1 mounting, power supply wiring,
In this manual, the safety precautions are ranked as "WARNING" the cable portion. Doing so can cause the unit or cable to be damaged or can specifications, and introduction to
and "CAUTION". [MOUNTING PRECAUTIONS] cause a malfunction due to a cable connection fault. option devices
 Do not drop the module or subject it to strong shock. A module damage may
Indicates that incorrect handling may cause WARNING result. Describes methods of the GT
GT Designer3 Designer3 basic operation for
WARNING hazardous conditions, resulting in death or  Be sure to shut off all phases of the external power supply used by the
 Before touching the unit, always touch grounded metals, etc. to discharge
(GOT2000) Screen drawing, transmitting data to GOT SH-081220ENG
severe injury. static electricity from human body, etc. Not doing so can cause the unit to fail
system before mounting or removing the GOT main unit to/from the panel.
or malfunction. Design Manual*1 SIMPLE series, and specifications (1D7ML9)
Not doing so can cause the unit to fail or malfunction. (sold separately) and settings of the object functions
Indicates that incorrect handling may cause used in GT Designer3
CAUTION hazardous conditions, resulting in medium or [TOUCH PANEL PRECAUTIONS]
slight personal injury or physical damage. CAUTION GOT2000 Series
Describes system configurations of
 Use the GOT in the environment that satisfies the general specifications
CAUTION Connection Manual
(Mitsubishi Products) for
connection methods applicable to SH-081197ENG
Note that the CAUTION level may lead to a serious accident described in this manual.Not doing so can cause an electric shock, fire, GT Works3 Version1*1
GOT2000 series and cable (1D7MJ8)
according to the circumstances. malfunction or product damage or deterioration.  For the analog-resistive film type touch panels, normally the adjustment is not creation methods
(sold separately)
 When mounting the GOT to the control panel, tighten the mounting screws in required.However, the difference between a touched position and the object
Always follow the instructions of both levels because they are
the specified torque range (0.36N·m to 0.48N·m) with a Phillips-head position may occur as the period of use elapses. When any difference GOT2000 Series Describes system configurations of
important to personal safety. screwdriver No.2. Undertightening can cause the GOT to drop, short circuit or between a touched position and the object position occurs, execute the touch Connection Manual (Non- connection methods applicable to
Please save this manual to make it accessible when required and malfunction. Overtightening can cause a drop, short circuit or malfunction panel calibration. SH-081198ENG
due to the damage of the screws or the GOT. Mitsubishi Products 1) for GOT2000 series and cable
always forward it to the end user.  When any difference between a touched position and the object position GT Works3 Version1*1 creation methods
 Remove the protective film of the GOT. When the user continues using the
GOT with the protective film, the film may not be removed. occurs, other object may be activated. This may cause an unexpected
[DESIGN PRECAUTIONS]  Operate and store the GOT in environments without direct sunlight, high operation due to incorrect output or malfunction. GOT2000 Series Describes system configurations of
temperature, dust, humidity, and vibrations. Connection Manual (Non- connection methods applicable to
SH-081199ENG
WARNING  Do not use the GOT in an environment with oil or chemicals. Doing so may Mitsubishi Products 2) for GOT2000 series and cable
cause failure or malfunction due to the oil or chemical entering into the GOT. [PRECAUTIONS WHEN THE DATA STORAGE IS IN GT Works3 Version1*1 creation methods
 Some failures of the GOT or cable may keep the outputs on or off. Some USE]
failures of a touch panel may cause malfunction of the input objects such as a [WIRING PRECAUTIONS] GOT2000 Series
touch switch. An external monitoring circuit should be provided to check for Connection Manual Describes system configurations of
output signals which may lead to a serious accident. Not doing so can cause WARNING
an accident due to false output or malfunction. WARNING (Microcomputer, connection methods applicable to
SH-081200ENG
MODBUS Products, GOT2000 series and cable
 Do not use the GOT as the warning device that may cause a serious  If the SD card mounted on drive A of the GOT is removed while the GOT is
accident. An independent and redundant hardware or mechanical interlock is  Be sure to shut off all phases of the external power supply used by the accessed, processing for the GOT might be interrupted about for 20 seconds. Peripherals) for GT creation methods
required to configure the device that displays and outputs serious warning. system before wiring. Failure to do so may result in an electric shock, product The GOT cannot be operated during this period. The functions that run in the Works3 Version1*1
Not doing so can cause an accident due to false output or malfunction. damage or malfunctions. background including a screen updating, alarm, logging, scripts, and others
 When the GOT detects its backlight failure, the GOT disables the input are also interrupted. Since this interruption makes an impact to the system *1 The manual in PDF-format is included in the GT Works3 products.
operation on the touch switch(s). Thus, operators cannot operate the GOT operation, it might cause failure. After inhibiting access to the SD card on the For details of a PLC to be connected, refer to the PLC user's manual
with touches. The GOT backlight failure can be checked with a system signal GOT utility screen, check that the SD card access LED is off and remove the
of the GOT. CAUTION SD card.
respectively.

 Even when the display section has dimmed due to a failure of the liquid Referenced Standard: GB/T15969.2
crystal section or the backlight on the GOT, the input operation of the touch  Please make sure to ground FG terminal of the GOT power supply section by
switches may still be enabled. This may cause an incorrect operation of the applying 100Ω or less which is used exclusively for the GOT. Not doing so CAUTION (Requirement of Chinese standardized law)
touch switches. For example, if an operator assumes that the display section may cause an electric shock or malfunction.
has dimmed because of the screen save function and touches the display Bundled Items
section to cancel the screen save, a touch switch may be activated. The GOT  Correctly wire the GOT power supply section after confirming the rated  If the data storage mounted on the GOT is removed while the GOT is
backlight failure can be checked with a system signal of the GOT. voltage and terminal arrangement of the product. Not doing so can cause a accessed, the data storage and files are damaged. To remove the data
fire or failure. storage from the GOT, check that the access to the data storage in SD card Model Name Specifications
 The display section of the GOT is an analog-resistive type touch panel. access LED, the system signal, and others is not performed.
Simultaneous pressing of two or more areas on the display section may  Tighten the terminal screws of the GOT power supply section in the specified 10" [800 × 480 dots], TFT color liquid crystal, 65536 colors
activate the switch between those areas. Do not press two or more areas  When removing the SD card from the GOT, make sure to support the SD card
torque range (0.5N•m to 0.6N•m). Undertightening can cause a short circuit by hand as it may pop out. Failure to do so may cause the SD card to drop GS2110-WTBD-N 24VDC, Memory capacity: 15MB, built-in Ethernet interface,
simultaneously on the display section. Doing so may cause an accident due built in RS-232 interface, built in RS-422/485 interface
to incorrect output or malfunction. or malfunction. Overtightening can cause a short circuit or malfunction due to from the GOT, resulting in a failure or break.
 When programs or parameters of the controller (such as a PLC) that is the damage of the screws or the GOT.  Before removing the USB device from the GOT, follow the procedure for 7" [800 × 480 dots], TFT color liquid crystal, 65536 colors
monitored by the GOT are changed, be sure to shut off the power of the GOT  Exercise care to avoid foreign matter such as chips and wire offcuts entering removal on the utility screen of the GOT. After the successful completion GS2107-WTBD-N 24VDC, Memory capacity: 15MB, built-in Ethernet interface,
promptly and power on the GOT again. Not doing so can cause an accident dialog is displayed, remove the USB device by hand carefully. Failure to do
the GOT. Not doing so can cause a fire, failure or malfunction. so may cause the USB device to drop from the GOT, resulting in a failure or built in RS-232 interface, built in RS-422/485 interface
due to false output or malfunction.
 Plug the communication cable into the GOT interface or the connector of the break.
 If a communication fault (including cable disconnection) occurs during
monitoring on the GOT, communication between the GOT and PLC CPU is connected unit, and tighten the mounting screws and the terminal screws in
suspended and the GOT becomes inoperative. A system where the GOT is the specified torque range. Undertightening can cause a short circuit or Bundled item Quantity
used should be configured to perform any significant operation to the system malfunction. Overtightening can cause a short circuit or malfunction dueto the Mounting fitting 4
by using the switches of a device other than the GOT on the assumption that damage of the screws or unit.
a GOT communication fault will occur. Not doing so can cause an accident GS21 General Description (This manual) 1
due to false output or malfunction.

Specifications 1.3 Power Supply Specifications Warranty

1. SPECIFICATIONS Item
GS2110-WTBD-N GS2107-WTBD-N Specifications Mitsubishi Electric will not be held liable for damage caused by
RS-422/485, 1ch
Item
GS2110-WTBD-N GS2107-WTBD-N
factors found not to be the cause of Mitsubishi Electric; machine
1.1 General Specifications Transmission speed: 115200/57600/38400/19200/
Input power supply voltage 24VDC (+10% -15%), ripple voltage 200mV or less
damage or lost profits caused by faults in the Mitsubishi Electric
9600/4800bps products; damage, secondary damage, accident compensation
Item Specifications Connector shape: D-sub 9 pins (Female) 7.6W (317mA/24V) or 6.5W (271mA/24V) or
RS-422/485 Power consumption caused by special factors unpredictable by Mitsubishi Electric;
Application: For communicating with a controller less less
Operating ambient
temperature*1
0 to 50°C Terminating resistor: 330 Ω, 110 Ω, OPEN damages to products other than Mitsubishi Electric products; and to
(Selectable by the terminating resistor setting 3.8W (158mA/24V) or 3.8W (158mA/24V) or
Storage ambient switch.)*9
At backlight off
less less other duties.
-20 to 60°C
temperature
Operating/Storage
RS-232, 1ch Inrush current 17A or less (6ms, 25°C, at the maximum load) For safe use
10% RH to 90% RH, non-condensing*2 Transmission speed: 115200/57600/38400/19200/ • This product has been manufactured as a general-purpose part for
ambient humidity 9600/4800bps Permissible instantaneous power
Within 5ms
Frequency Acceleration
Half- Sweep Connector shape: D-sub 9 pins (Male) failure time general industries, and has not been designed or manufactured to
amplitude Count RS-232
Application: For communication with a controller or Noise immunity Conforms to IEC61000-4-4, 2kV (power supply line) be incorporated in a device or system used in purposes related to
-- 3.5mm 10times barcode reader
Conforms Under 5 to 8.4Hz
each in X, For PC connection (Project data read/write, FA 350VAC for 1 minute (across power supply human life.
to intermittent Dielectric withstand voltage
Vibration resistance
IEC vibration 8.4 to 150Hz 9.8m/s2 -- Y and Z transparent function) terminals and earth) • Before using the product for special purposes such as nuclear
directions Built-in 500VDC across power terminals and earth, 10 MΩ power, electric power, aerospace, medicine or passenger
61131-2 Data Transfer method: 100BASE-TX, 10BASE-T, Insulation resistance
Under -- 1.75mm interface or more by an insulation resistance tester
continuous
5 to 8.4Hz
--
1ch movement vehicles, consult with Mitsubishi Electric.
Connector shape: RJ45 (modular jack)
vibration 8.4 to 150Hz 4.9m/s 2
-- Ethernet AUTO MDI/MDI-X • This product has been manufactured under strict quality control.
However, when installing the product where major accidents or
Shock resistance
Conforms to IEC 61131-2 (147m/s2, 3 times each in the X, Y, and Z
directions)
Application: For communication with a controller
For PC connection (Project data read/write, FA 2. NOTIFICATION OF CE MARKING losses could occur if the product fails, install appropriate backup or
transparent function)
Operating No greasy fumes, corrosive gas, flammable gas, excessive
The following products have shown compliance through direct testing (to the
failsafe functions in the system.
atmosphere conductive dust, and direct sunlight (as well as at storage) 1 channel (rear face)
USB version: USB1.1 (Full-Speed 12 Mbps), identified standards) and design analysis (forming a technical construction file) to
Operating altitude*3 2000m (6562ft) max. Country/Region Sales office/Tel
USB (Device) Connector shape: USB Mini-B the European Directive for Electromagnetic Compatibility when used as directed by
Installation location Inside control panel Application: For PC connection (Project data read/ USA Mitsubishi Electric Automation, Inc.
the appropriate documentation.
Overvoltage write, FA transparent function) 500 Corporate Woods Parkway, Vernon Hills, IL 60061, U.S.A.
category*4
II or less • This product is designed for use in industrial applications Tel: +1-847-478-2100
Conforms to the SD standard, 1ch • Authorized representative in the EU and the UK: Brazil Mitsubishi Electric do Brasil Comercio e Servicos Ltda.
Pollution degree*5 2 or less Supported memory card: SDHC memory card, SD Mitsubishi Electric Europe BV Avenida Adelino Cardana, 293, 21 andar, Bethaville, Barueri SP, Brazil
Cooling method Self-cooling SD card memory card Tel: +55-11-4689-3000
Application: Project data read/write, logging data
Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
Grounding with a ground resistance of 100 Ω or less by using a ground Mexico Mitsubishi Electric Automation, Inc. Mexico Branch
Grounding cable that has a cross-sectional area of 2 mm2 or more. If impossible, save - Type: Graphic operation terminal
Boulevard Miguel de Cervantes Saavedra 301, Torre Norte Piso 5, Ampliacion Granada,
connect the ground cable to the control panel. - Models: GOT SIMPLE series Miguel Hidalgo, Ciudad de Mexico, Mexico, C.P.11520
Buzzer output Single tone (LONG/SHORT/OFF adjustable)
UL Type 1*6 Standard Remark Tel: +52-55-3067-7512
Type rating
Protective structure IP65F (only the front part of the panel)*6*8 Germany Mitsubishi Electric Europe B.V. German Branch
*1: Includes the temperature inside the enclosure of the control panel on which the Compliance with all relevant aspects of the
EMI Mitsubishi-Electric-Platz 1, 40882 Ratingen, Germany
GOT is installed. W272(10.71)  W206(8.11)  standard. (Radiated Emissions) Tel: +49-2102-486-0
External dimensions H214(8.43) D56(2.21) H155(6.11) D50(1.97) EN61131-2 : 2007
*2: If the ambient temperature exceeds 40°C, the absolute humidity must not [mm] (inch) [mm] (inch) Programmable controllers - Compliance with all relevant aspects of the UK Mitsubishi Electric Europe B.V. UK Branch
exceed 90% RH at 40°C. Equipment, requirements standard. Travellers Lane, UK-Hatfield, Hertfordshire, AL10 8XB, U.K.
*3: Do not use or store the GOT under pressures higher than the atmospheric W258(10.16) × W191(7.52) × and tests EMS (ESD, RF electromagnetic field, EFTB, Surge, Tel: +44-1707-28-8780
Panel cutting dimensions RF conducted disturbances and Power
pressure of altitude 0m (0ft). Failure to observe this instruction may cause a H200(7.88) [mm] (inch) H137(5.40) [mm] (inch) Italy Mitsubishi Electric Europe B.V. Italian Branch
frequency magnetic field) Centro Direzionale Colleoni - Palazzo Sirio, Viale Colleoni 7,
malfunction. When the air inside the control panel is purged by pressurization, Approx. 0.9 (2.0) [kg] 20864 Agrate Brianza (MB), Italy
the surface sheet may be lifted by high pressure. As a result, the touch panel Weight (excluding a fitting) Approx. 1.3 (2.9) [kg] (lb) For more details please contact your local Mitsubishi Electric sales site.
(lb) Tel: +39-039-60531
may be difficult to press, and the sheet may be peeled off. For details of CE marking, refer to the following. Spain Mitsubishi Electric Europe B.V. Spanish Branch
*4: This indicates the section of the power supply to which the equipment is Compatible software package →GOT SIMPLE series User's Manual
Version1.250L or later Carretera de Rubi, 76-80-Apdo. 420, E-08190 Sant Cugat del Valles (Barcelona), Spain
(Version of GT Designer3)
assumed to be connected between the public electrical power distribution Tel: +34-935-65-3131
network and the machinery within the premises. Category II applies to *1: Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal France Mitsubishi Electric Europe B.V. French Branch
equipment for which electrical power is supplied from fixed facilities. The surge display panel. It is impossible to completely avoid this symptom, as the liquid 3. COMPLIANT WITH THE UKCA 25, Boulevard des Bouvets, 92741 Nanterre Cedex, France
Tel: +33-1-55-68-55-68
voltage withstand level for up to the raged voltage of 300V is 2500V. crystal display comprises of a great number of display elements. Flickers and
*5: This index indicates the degree to which conductive pollution is generated in partial discoloration may be generated on the liquid crystal display panel due to MARKING Czech Mitsubishi Electric Europe B.V. Czech Branch
the environment where the equipment is used. In pollution degree 2, only non- individual differences of panels. Please note that these phenomena appear due Pekarska 621/7, 155 00 Praha 5, Czech Republic
Tel: +420-255 719 200
conductive pollution occurs but temporary conductivity may be produced due to to its characteristic and are not caused by product defect. Requirements for compliance with the UKCA marking are the same with the EC
Turkey Mitsubishi Electric Turkey A.S. Umraniye Branch
condensation. *2: Flickering may occur due to vibration, shock, or the display colors. Directives (CE marking). Serifali Mahallesi Nutuk Sokak No:5, TR-34775 Umraniye / Istanbul, Turkey
*6: This is for use on a flat surface of a Type 1 enclosure. *3: To prevent the display section from burning in and lengthen the backlight life, Tel: +90-216-526-3990
enable the screen save function and turn off the backlight. Poland Mitsubishi Electric Europe B.V. Polish Branch
1.2 Performance Specifications *4: When a stylus is used, the touch panel has a life of 100 thousand touches. ul. Krakowska 48, 32-083 Balice, Poland
The stylus must satisfy the following specifications. Tel: +48-12-347-65-00
Specifications Material: Polyacetal resin Russia Mitsubishi Electric (Russia) LLC St. Petersburg Branch
Item
GS2110-WTBD-N GS2107-WTBD-N Tip radius: 0.8mm or more Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua", office 720; 195027 St. Petersburg, Russia
*5: If you touch two points or more simultaneously on the touch panel, a switch in Tel: +7-812-633-3497
Type TFT color liquid crystal display an unintended location may operate. Do not press two or more areas South Africa Adroit Technologies
simultaneously on the touch panel. 20 Waterford Office Park, 189 Witkoppen Road, Fourways, South Africa
Screen size 10" 7" Tel: +27-11-658-8100
*6: Note that this does not guarantee all users' operation environment.
Resolution WVGA: 800 × 480 dots The GOT may not be used in an environment where the GOT is exposed to oil China Mitsubishi Electric Automation (China) Ltd.
Mitsubishi Electric Automation Center, No.1386 Hongqiao Road, Shanghai, China
W222(8.74) × W154(6.06) × or chemicals for a long time, or where oil mist fills the air. Tel: +86-21-2322-3030
Display size
H132.5(5.22) [mm] (inch) H85.9(3.38) [mm] (inch) *7: Minimum size of a key that can be arranged. Taiwan SETSUYO ENTERPRISE CO., LTD.
Display To ensure safe use of the product, the following settings are recommended. 6F, No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan
16-dot standard font: 50 characters × 30 rows (two-
section*1*2 byte characters) Key size: 16 × 16 dots or larger Tel: +886-2-2299-2499
Display character Distance between keys: 16 dots or more Korea Mitsubishi Electric Automation Korea Co., Ltd.
12-dot standard font: 66 characters × 40 rows (two-
byte characters) *8: The suffix "F" of "IP65F" is a symbol that indicates protection rate against oil. It 7F to 9F, Gangseo Hangang Xi-tower A, 401, Yangcheon-ro, Gangseo-Gu,
is described in the Appendix of JIS C 0920 of the Japanese Industrial Seoul 07528, Korea
Display color 65536 colors Standards. Tel: +82-2-3660-9569
*9: For the GOT multi-drop connection, set the terminating resistor setting switch of Singapore Mitsubishi Electric Asia Pte. Ltd.
Brightness 32-level adjustment
307 Alexandra Road, Mitsubishi Electric Building, Singapore 159943
the GOT according to the connection type.
Backlight*3 LED-type (no replacement required) Tel: +65-6473-2308
For details on the GOT multi-drop connection, refer to the following.
Thailand Mitsubishi Electric Factory Automation (Thailand) Co., Ltd.
Type Analog-resistive film type →GOT2000 Series Connection Manual (Mitsubishi Electric Products) For GT 12th Floor, SV.City Building, Office Tower 1, No. 896/19 and 20 Rama 3 Road,
Works3 Version1 Kwaeng Bangpongpang, Khet Yannawa, Bangkok 10120, Thailand
Key size Minimum 2 × 2 dots*7 (per key)
Tel: +66-2682-6522 to 31
Touch Number of points Indonesia PT. Mitsubishi Electric Indonesia
panel*4 Simultaneous 2-point presses prohibited (Only one
touched Gedung Jaya 8th Floor, JL. MH. Thamrin No.12, Jakarta Pusat 10340, Indonesia
point can be touched.)*5
simultaneously Tel: +62-21 3192-6461
Vietnam Mitsubishi Electric Vietnam Company Limited
Life 1 million times (operating force 0.98N max.) 11th & 12th Floor, Viettel Tower B, 285 Cach Mang Thang 8 Street, Ward 12,
Flash memory (Internal) (15MB), for storing project District 10, Ho Chi Minh City, Vietnam.
data, OS Tel: +84-28-3910-5945
Memory C drive
India Mitsubishi Electric India Pvt. Ltd. Pune Branch
Life (Number of write times) 100000 times Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Pune - 411026, Maharashtra, India
Tel: +91-20-2710-2000
Australia MITSUBISHI ELECTRIC AUSTRALIA PTY. LTD.
348 Victoria Road, P.O. Box 11, Rydalmere, N.S.W 2116, Australia
Tel: +61-2-9684-7777
MITSUBISHI ELECTRIC
AUTOMATION MANUFACTURING (CHANGSHU) CO.,LTD.
No.1181 Southeast Road, Changshu New & Hi-tech Industrial Development Zone of Jiangsu, 215500 China

When exported from Japan, this manual does not require application to the Ministry
of Economy, Trade and Industry for service transaction permission.
Specifications subject to change without notice.