SOUTHWEST
OILFIELD PRODUCTS, INC.
MUD PUMP EXPENDABLE PARTS LIST
SOUTHWEST 8446-25A FLUID END
FOR WIRTH TPK-1600
®
MUD PUMP PERFORMANCE CHART
PUMP MAX MAX STROKE LINER SIZE IN INCHES
MODEL I.H.P. S.P.M. LENGTH 4” 4 ¼” 4 ½” 4 ¾” 5” 5 ¼” 5 ½” 5 ¾” 6” 6 ¼” 6 ½” 6 ¾” 7”
MAX-P.S.I. 7500 7500 7500 7449 6723 6098 5556 5083 4669 4303 3978 3689 3430
12”
TPK-1600 1600 120 G.P.R. 1.96 2.21 2.48 2.76 3.06 3.37 3.70 4.05 4.41 4.78 5.17 5.58 6.00
G.P.M. @ 115 R.P.M. 235 265 297 331 367 405 444 486 529 574 621 669 720
NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKE PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION
*MAX – P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS
BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY
V:\7500 psi Pump Triplex\WIRTH SW TPK-1600 7500PSI\8446-25A_WIRTH_TPK-1600_7500PSI.pdf REV. A 6/2/2015
FLUID END TYPE MODEL OF PUMP SIZE OF PUMP
SOUTHWEST 7500 PSI WIRTH TPK-1600 7” X 12”
ITEM PART QTY.
NO. NO. DESCRIPTION REQ’D
8446-25A FLUID END ASSEMBLY: (CONSISTS OF ITEMS 3,4,5,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,34,35,36,38,40,42,43,44)
1 1388-XX LINER (REFER TO- GUIDE FOR ORDERING CHART FOR TYPE (G); (Y); AND FOR BORE SIZE (XX)) 3
2 2974-XX LINER SEAL 3
3 8446-29 LINER WEARPLATE 3
4 568-369 WEARPLATE O-RING (PARKER SIZE NO. 2-369) 3
5 2988 WEARPLATE & MODULE SEAL 6
6 XX-BYY PISTON (REFER TO- GUIDE FOR ORDERING CHART FOR SIZE (XX) AND FOR TYPE(YY)) 3
7 568-225 PISTON SEAL 3
8 1287-32 PISTON ROD (WITH ELASTIC STOP NUT) 3
9 API-4ESN PISTON ROD NUT 3
10 1287-1 SUB ROD 3
11 1287CW ROD CLAMP (WITH WATER JACKET) 6
11A 1200H30 HOSE (1/2” X 30” WITH 1/2” MALE X 3/8” MALE CONNECTIONS) 3
11B 1200130 PIPE (3/8” X 13” GALVANIZED AND THREADED ON ONE END) 3
11C 4018-93 BOLT (5/8” X 6-1/2” GRADE 8 BOLT WITH LOCK NUT AND WASHER) 12
12 6200G-26 PONY ROD 3
13 SEE PAGE VALVE 6
14 SEE PAGE VALVE INSERT 6
15 SEE PAGE VALVE SPRING 6
16 SEE PAGE VALVE SEAT 6
SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG) 1
17 4488-25 VALVE COVER FLANGE 6
18 4588-25 SCREW GLAND 6
19 4690-25A PLUG (COMPLETE WITH VALVE GUIDE, BUSHING, AND SCREWS; INCLUDES ITEMS 20, 21,22, 23) 6
20 P115 HP VALVE COVER PLUG NITRILE SEAL 6
21 4788-25R VALVE GUIDE (COMPLETE WITH BUSHING #4700I) 6
22 4700I VALVE GUIDE BUSHING 6
23 4018-18 VALVE GUIDE SCREW 12
24 4015-2 VALVE COVER STUD (WITH SW PART# HHN1250-7 1-1/4-7 HEAVY HEX NUT) 72
FLUID END TYPE MODEL OF PUMP SIZE OF PUMP
SOUTHWEST 7500 PSI WIRTH TPK-1600 7” X 12”
ITEM QTY.
NO. PART NO. DESCRIPTION REQ’D
25 4020-20 SPACER FLANGE CAP SCREW 12
26 6446-1 LINER RETAINER PLATE 3
27 6446-2 LINER RETAINER FLANGE 3
28 4018-7 LINER RETAINER CAP SCREW 30
29 6546 LINER RETAINER GLAND 3
30 4019-54 SUCTION MODULE STUD (WITH SW PART# HHN1750-8 1-3/4-8 HEAVY HEX NUTS) 18
31 4018-19 SUCTION MANIFOLD CAP SCREW 18
32 8546 SUCTION MANIFOLD 1
33 AJO419R SUCTION MANIFOLD SEAL 3
34 8446-26 SUCTION MODULE 3
35 8446-27 DISCHARGE MODULE 3
36 8488-5 DOWEL PIN 6
37 8346-25 DISCHARGE MANIFOLD 1
38 4019-60 DISCHARGE MANIFOLD STUD (WITH SW PART# HHN1250-7 1-1/4-7 HEAVY HEX NUT) 18
39 2988 DISCHARGE MANIFOLD SEAL 3
40 4020-19 POWER END CAP SCREW 24
41 8488-11 SET SCREW 9
42 8446-28 SPACER FLANGE 3
43 LW500 LOCKWASHER ½ 12
44 LW875 LOCKWASHER 7/8 18
** POLYURETHANE SEAL AVAILABLE **
SOUTHWEST\WIRTH TPK-1600 7" X 12" 7500 P.S.I. GUIDE TO ORDERING
PISTONS LINERS LINER SEALS
SIZE FAIL-SAFE DUAL-DURO® GRAYLOY ®
ZIRCONIA RUBBER URETHANE
4" 76-BSF 76-BDD 1388G06 N/A 2974-06 2974-06U
4 1/4" 77-BFS 77-BDD 1388G07 N/A 2974-07 2974-07U
4 1/2" 78-BFS 78-BDD 1388G08 N/A 2974-08 2974-08U
4 3/4" 79-BFS 79-BDD 1388G09 N/A 2974-09 2974-09U
5" 81-BFS 81-BDD 1388G1 1388ZIR1 2974-1 2974-1U
5 1/4" 82-BFS 82-BDD 1388G2 N/A 2974-2 2974-2U
5 1/2" 83-BFS 83-BDD 1388G3 1388ZIR3 2974-3 2974-3U
5 3/4" 84-BFS 84-BDD 1388G4 N/A 2974-4 2974-4U
6" 85-BFS 85-BDD 1388G5 1388ZIR5 2974-5 2974-5U
6 1/4" 86-BFS 86-BDD 1388G6 N/A 2974-6 2974-6U
6 1/2" 87-BFS 87-BDD 1388G7 1388ZIR7 2974-7 2974-7U
6 3/4" 88-BFS 88-BDD 1388G8 N/A 2974-8 2974-8U
7" 89-BFS 89-BDD 1388G9 N/A 2974-9 2974-9U
VALVES & SEATS
TYPE VALVE INSERT SPRING STAINLESS SPRING SEAT PULLER HEAD
FULL OPENING SWND-6-V2 5710-115 SWND-6-S4 SWND-6-PH
*DBL-ANGLE O-RING SWR-0500119 SWR-0515845 SWR-0513744 SWR-0514790 SWR-0512436 SWTM-3-7D
*STANDARD PLATE SWR-0505038 SWR-0504890 SWR-0513937 SWR-0515576 SWR-0512436 SWTM-3-7D
*CROSS ARM SEAT SW5B-EH SWUDD-6A SW5710-115 SW1235-123 SW6ADD-B4 SWJDD-6A
* CENTER GUIDED VALVES AND SEATS
® ®
NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS, INC.
APPROVED BY: DATE:
FILE# H:\ACAD\FORMS\xxx.XLS REVISED BY: REVISION DATE: REVISION
Pg. 6
8 7 6 5 4 3 2 1
8376-26A DISCHARGE STRAINER CROSS ASSEMBLY
D
OVERVIEW D
THE 8376-26A DISCHARGE STRAINER CROSS ASSEMBLY IS
C
DESIGNED FOR USE ON MUD PUMP DISCHARGE MANIFOLDS
C
AND HAS A WORKING PRESSURE RATING OF 7,500 PSI.
THIS CROSS FEATURES A STRAINER THAT IS ACCESSED BY
REMOVING A BLIND FLANGE FROM THE OPPOSITE SIDE OF
THE DISCHARGE MANIFOLD FLANGE.
THIS CROSS USES BX-TYPE RING JOINT GASKETS FOR SEALING.
B
B
CONTENTS
1. OVERVIEW
2. NOMENCLATURE
3. FACE SIZES & BOLT PATTERNS
SOUTHWEST OILFIELD PRODUCTS
4. BILL OF MATERIALS
DRAWN BY DATE
A 10340 WALLISVILLE ROAD, HOUSTON,TX 77013
BH 08/20/2014 TITLE: A
DATE REVISION DESCRIPTION DISCHARGE CROSS ASSEMBLY FOR
CHECKED BY DATE 7500 PSI SOUTHWEST FLUID ENDS
01/22/1998 0 INITIAL RELEASE
08/16/2012 A REDRAWN IN SOLIDWORKS EF 08/20/2014 SIZE DWG. NO. REV.
10/29/2013 B ADDED RAISED FACE TO WELD NECK FLANGE
03/20/2014 C ADDED NOTES, RE-ARRANGED DRAWING VIEWS THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT B 8376-26A D
08/20/2014 D REFORMATTED PRINT ACCORDING TO MFG ENG REQUEST THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD
PRODUCTS IS PROHIBITED. SHEET 1 OF 4
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8376-26A DISCHARGE STRAINER CROSS ASSEMBLY
NOMENCLATURE
D D
PULSATION DAMPENER FACE
*RIGHT MUD LINE FACE
DISCHARGE MANIFOLD FACE
C C
STRAINER CLEAN OUT FACE
B
B
BOTTOM FACE *LEFT MUD LINE FACE
DRAWN BY DATE SOUTHWEST OILFIELD PRODUCTS
A 10340 WALLISVILLE ROAD, HOUSTON,TX 77013
BH 08/20/2014 TITLE: A
*HAND OF MUD LINES IS DETERMINED BY LOOKING FROM DISCHARGE CROSS ASSEMBLY FOR
CHECKED BY DATE 7500 PSI SOUTHWEST FLUID ENDS
THE DISCHARGE MANIFOLD TOWARD THE CROSS
EF 08/20/2014 SIZE DWG. NO. REV.
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT B 8376-26A D
THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD
PRODUCTS IS PROHIBITED. SHEET 2 OF 4
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8376-26A DISCHARGE STRAINER CROSS ASSEMBLY
FLANGE SIZES AND BOLT PATTERN ORIENTATION D
D
RIGHT MUD LINE FACE BOLT PATTERN ORIENTATION
C C
STRADDLED CENTERED
STRAINER CLEAN OUT FACE PULSATION DAMPENER FACE DISCHARGE MANIFOLD FACE
FLANGE SIZES
FACE DESCRIPTION GASKET ORIENTATION
PULSATION DAMPENER 4-1/16" API 6BX, 10K BX-155 CENTERED
B
B
DISCHARGE MANIFOLD 5-1/8" API 6BX, 10K BX-169 STRADDLED
STRAINER CLEAN OUT 5-1/8" API 6BX, 10K BX-169 STRADDLED
RIGHT MUD LINE 5-1/8" API 6BX, 10K BX-169 CENTERED
21 5 LEFT MUD LINE FACE LEFT MUD LINE 5-1/8" API 6BX, 10K BX-169 CENTERED
8X 32 " 18"
1
3/4-10 UNC 18" PLATFORM
BOTTOM FACE N/A CENTERED
ON 9-1/2" BOLT CIRCLE CONNECTION
DRAWN BY DATE SOUTHWEST OILFIELD PRODUCTS
A 10340 WALLISVILLE ROAD, HOUSTON,TX 77013
BH 08/20/2014 TITLE: A
DISCHARGE CROSS ASSEMBLY FOR
CHECKED BY DATE 7500 PSI SOUTHWEST FLUID ENDS
EF 08/20/2014 SIZE DWG. NO. REV.
BOTTOM FACE
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT B 8376-26A D
THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD
PRODUCTS IS PROHIBITED. SHEET 3 OF 4
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
8376-26A DISCHARGE STRAINER CROSS ASSEMBLY
BILL OF MATERIALS 5
D D
6 2
7 1 4
14.655
15"
C C
7.500
17"
B
B
15"
NOTE: FOR 4019-56 TAP END STUD BOLTS, TORQUE NUTS TO 670 FT-LBS WITH API MODIFIED
THREAD COMPOUND PER API RP 5A3, SOUTHWEST HI PRO 4000 OR EQUAL
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 8376-26 DISCHARGE CROSS FOR 7500 PSI SWFE 1
2 8290-26RD STRAINER 1
DRAWN BY DATE SOUTHWEST OILFIELD PRODUCTS
A 3 4019-56 STUD 48 10340 WALLISVILLE ROAD, HOUSTON,TX 77013
BH 08/20/2014 TITLE: A
4 HHN1125-7 1-1/8 - 7 HEAVY HEX NUT 48 DISCHARGE CROSS ASSEMBLY FOR
CHECKED BY DATE 7500 PSI SOUTHWEST FLUID ENDS
5 BX-155 4-1/16" RING JOINT GASKET 1
EF 08/20/2014 SIZE DWG. NO. REV.
6 BX-169 5-1/8" RING JOINT SEAL 4
7 10000-5BFLANGE API 6A 10000# TYPE 6BX 5-1/8 BLIND FLANGE 1
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT B 8376-26A D
THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD
PRODUCTS IS PROHIBITED. SHEET 4 OF 4
8 7 6 5 4 3 2 1
TORQUE SPECIFICATIONS FOR 8446-25A SOUTHWEST FLUID END ASSEMBLY
WIRTH TPK-1600 7500 P.S.I.
TORQUE TYPE (EXPRESSED IN FOOT-POUNDS)
PART NUMBER DESCRIPTION COPPERCOTE MOLY GREASE
API-4ESN PISTON NUT NO MORE FORCE THAN ONE MAN ON A 3'
WRENCH/CHEATER COMBINATION
4018-93 ROD CLAMP BOLT 150 MAXIMUM 150 MAXIMUM
4018-18 VALVE GUIDE SCREW 53 80
4015-2 VALVE COVER STUD 669 970
4020-20 SPACER FLANGE CAP SCREW 2730 4095
4020-19 POWER END CAP SCREW 1196 1794
4018-7 LINER RETAINER CAP SCREW 455 682
4019-54 SUCTION MODULE STUD 2275 3299
4018-19 SUCTION MANIFOLD CAP SCREW 215 322
4019-60 DISCHARGE MANIFOLD STUD 757 1098
8446-25A FLUID END FOR WIRTH TPK-1600 (7500 PSI)
REVISION SUMMARY
REVISION DATE REASON OF CHANGE
REV A 6/02/15 UPDATED TORQUE SPECIFICATION PAGE AND 8376-26A DRAWING
Southwest Oilfield Products 10340 Wallisville Road, Houston, TX 77013 Office 713-675-7541
